2 # PHY Layer Configuration
6 tristate "PHY Device support and infrastructure"
9 Ethernet controllers are usually attached to PHY
10 devices. This option provides infrastructure for
15 comment "MII PHY device drivers"
18 tristate "Drivers for the Aquantia PHYs"
20 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
23 tristate "Drivers for Atheros AT803X PHYs"
25 Currently supports the AT8030 and AT8035 model
28 tristate "Drivers for the AMD PHYs"
30 Currently supports the am79c874
33 tristate "Drivers for Marvell PHYs"
35 Currently has a driver for the 88E1011S
38 tristate "Drivers for Davicom PHYs"
40 Currently supports dm9161e and dm9131
43 tristate "Drivers for Quality Semiconductor PHYs"
45 Currently supports the qs6612
48 tristate "Drivers for the Intel LXT PHYs"
50 Currently supports the lxt970, lxt971
53 tristate "Drivers for the Cicada PHYs"
55 Currently supports the cis8204
58 tristate "Drivers for the Vitesse PHYs"
60 Currently supports the vsc8244
63 tristate "Drivers for the Teranetics PHYs"
65 Currently supports the Teranetics TN2020
68 tristate "Drivers for SMSC PHYs"
70 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
73 tristate "Drivers for Broadcom PHYs"
75 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
76 BCM5481 and BCM5482 PHYs.
79 tristate "Drivers for Broadcom 63xx SOCs internal PHY"
82 Currently supports the 6348 and 6358 PHYs.
85 tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
87 Currently supports the BCM7366, BCM7439, BCM7445, and
88 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
91 tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
93 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
96 tristate "Drivers for ICPlus PHYs"
98 Currently supports the IP175C and IP1001 PHYs.
101 tristate "Drivers for Realtek PHYs"
103 Supports the Realtek 821x PHY.
106 tristate "Drivers for National Semiconductor PHYs"
108 Currently supports the DP83865 PHY.
111 tristate "Driver for STMicroelectronics STe10Xp PHYs"
113 This is the driver for the STe100p and STe101p PHYs.
115 config LSI_ET1011C_PHY
116 tristate "Driver for LSI ET1011C PHY"
118 Supports the LSI ET1011C PHY.
121 tristate "Driver for Micrel PHYs"
123 Supports the KSZ9021, VSC8201, KS8001 PHYs.
126 tristate "Driver for Texas Instruments DP83848 PHY"
128 Supports the DP83848 PHY.
131 tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
133 Currently supports the DP83867 PHY.
136 tristate "Drivers for Microchip PHYs"
138 Supports the LAN88XX PHYs.
141 tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
144 Adds the platform "fixed" MDIO Bus to cover the boards that use
145 PHYs that are not connected to the real MDIO bus.
147 Currently tested with mpc866ads and mpc8349e-mitx.
150 tristate "Support for bitbanged MDIO buses"
152 This module implements the MDIO bus protocol in software,
153 for use by low level drivers that export the ability to
154 drive the relevant pins.
159 tristate "Support for GPIO lib-based bitbanged MDIO buses"
160 depends on MDIO_BITBANG && GPIOLIB
162 Supports GPIO lib-based MDIO busses.
164 To compile this driver as a module, choose M here: the module
165 will be called mdio-gpio.
168 tristate "Support for MDIO buses on Octeon and ThunderX SOCs"
172 This module provides a driver for the Octeon and ThunderX MDIO
173 busses. It is required by the Octeon and ThunderX ethernet device
177 tristate "Allwinner sun4i MDIO interface support"
178 depends on ARCH_SUNXI
180 This driver supports the MDIO interface found in the network
181 interface units of the Allwinner SoC that have an EMAC (A10,
185 tristate "MOXA ART MDIO interface support"
186 depends on ARCH_MOXART
188 This driver supports the MDIO interface found in the network
189 interface units of the MOXA ART SoC
195 This module provides a driver framework for MDIO bus
196 multiplexers which connect one of several child MDIO busses
197 to a parent bus. Switching between child busses is done by
198 device specific drivers.
200 config MDIO_BUS_MUX_GPIO
201 tristate "Support for GPIO controlled MDIO bus multiplexers"
202 depends on OF_GPIO && OF_MDIO
205 This module provides a driver for MDIO bus multiplexers that
206 are controlled via GPIO lines. The multiplexer connects one of
207 several child MDIO busses to a parent bus. Child bus
208 selection is under the control of GPIO lines.
210 config MDIO_BUS_MUX_MMIOREG
211 tristate "Support for MMIO device-controlled MDIO bus multiplexers"
212 depends on OF_MDIO && HAS_IOMEM
215 This module provides a driver for MDIO bus multiplexers that
216 are controlled via a simple memory-mapped device, like an FPGA.
217 The multiplexer connects one of several child MDIO busses to a
218 parent bus. Child bus selection is under the control of one of
219 the FPGA's registers.
221 Currently, only 8-bit registers are supported.
223 config MDIO_BCM_UNIMAC
224 tristate "Broadcom UniMAC MDIO bus controller"
227 This module provides a driver for the Broadcom UniMAC MDIO busses.
228 This hardware can be found in the Broadcom GENET Ethernet MAC
229 controllers as well as some Broadcom Ethernet switches such as the
230 Starfighter 2 switches.
233 config MICREL_KS8995MA
234 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"