drivers/net/phy/micrel.c

   1 /*
   2  * drivers/net/phy/micrel.c
   3  *
   4  * Driver for Micrel PHYs
   5  *
   6  * Author: David J. Choi
   7  *
   8  * Copyright (c) 2010 Micrel, Inc.
   9  *
  10  * This program is free software; you can redistribute  it and/or modify it
  11  * under  the terms of  the GNU General  Public License as published by the
  12  * Free Software Foundation;  either version 2 of the  License, or (at your
  13  * option) any later version.
  14  *
  15  * Support : ksz9021 1000/100/10 phy from Micrel
  16  *              ks8001, ks8737, ks8721, ks8041, ks8051 100/10 phy
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/phy.h>
  22
  23 #define PHY_ID_KSZ9021                  0x00221611
  24 #define PHY_ID_KS8737                   0x00221720
  25 #define PHY_ID_KS8041                   0x00221510
  26 #define PHY_ID_KS8051                   0x00221550
  27 /* both for ks8001 Rev. A/B, and for ks8721 Rev 3. */
  28 #define PHY_ID_KS8001                   0x0022161A
  29
  30 /* general Interrupt control/status reg in vendor specific block. */
  31 #define MII_KSZPHY_INTCS                        0x1B
  32 #define KSZPHY_INTCS_JABBER                     (1 << 15)
  33 #define KSZPHY_INTCS_RECEIVE_ERR                (1 << 14)
  34 #define KSZPHY_INTCS_PAGE_RECEIVE               (1 << 13)
  35 #define KSZPHY_INTCS_PARELLEL                   (1 << 12)
  36 #define KSZPHY_INTCS_LINK_PARTNER_ACK           (1 << 11)
  37 #define KSZPHY_INTCS_LINK_DOWN                  (1 << 10)
  38 #define KSZPHY_INTCS_REMOTE_FAULT               (1 << 9)
  39 #define KSZPHY_INTCS_LINK_UP                    (1 << 8)
  40 #define KSZPHY_INTCS_ALL                        (KSZPHY_INTCS_LINK_UP |\
  41                                                 KSZPHY_INTCS_LINK_DOWN)
  42
  43 /* general PHY control reg in vendor specific block. */
  44 #define MII_KSZPHY_CTRL                 0x1F
  45 /* bitmap of PHY register to set interrupt mode */
  46 #define KSZPHY_CTRL_INT_ACTIVE_HIGH             (1 << 9)
  47 #define KSZ9021_CTRL_INT_ACTIVE_HIGH            (1 << 14)
  48 #define KS8737_CTRL_INT_ACTIVE_HIGH             (1 << 14)
  49
  50 static int kszphy_ack_interrupt(struct phy_device *phydev)
  51 {
  52         /* bit[7..0] int status, which is a read and clear register. */
  53         int rc;
  54
  55         rc = phy_read(phydev, MII_KSZPHY_INTCS);
  56
  57         return (rc < 0) ? rc : 0;
  58 }
  59
  60 static int kszphy_set_interrupt(struct phy_device *phydev)
  61 {
  62         int temp;
  63         temp = (PHY_INTERRUPT_ENABLED == phydev->interrupts) ?
  64                 KSZPHY_INTCS_ALL : 0;
  65         return phy_write(phydev, MII_KSZPHY_INTCS, temp);
  66 }
  67
  68 static int kszphy_config_intr(struct phy_device *phydev)
  69 {
  70         int temp, rc;
  71
  72         /* set the interrupt pin active low */
  73         temp = phy_read(phydev, MII_KSZPHY_CTRL);
  74         temp &= ~KSZPHY_CTRL_INT_ACTIVE_HIGH;
  75         phy_write(phydev, MII_KSZPHY_CTRL, temp);
  76         rc = kszphy_set_interrupt(phydev);
  77         return rc < 0 ? rc : 0;
  78 }
  79
  80 static int ksz9021_config_intr(struct phy_device *phydev)
  81 {
  82         int temp, rc;
  83
  84         /* set the interrupt pin active low */
  85         temp = phy_read(phydev, MII_KSZPHY_CTRL);
  86         temp &= ~KSZ9021_CTRL_INT_ACTIVE_HIGH;
  87         phy_write(phydev, MII_KSZPHY_CTRL, temp);
  88         rc = kszphy_set_interrupt(phydev);
  89         return rc < 0 ? rc : 0;
  90 }
  91
  92 static int ks8737_config_intr(struct phy_device *phydev)
  93 {
  94         int temp, rc;
  95
  96         /* set the interrupt pin active low */
  97         temp = phy_read(phydev, MII_KSZPHY_CTRL);
  98         temp &= ~KS8737_CTRL_INT_ACTIVE_HIGH;
  99         phy_write(phydev, MII_KSZPHY_CTRL, temp);
 100         rc = kszphy_set_interrupt(phydev);
 101         return rc < 0 ? rc : 0;
 102 }
 103
 104 static int kszphy_config_init(struct phy_device *phydev)
 105 {
 106         return 0;
 107 }
 108
 109 static struct phy_driver ks8737_driver = {
 110         .phy_id         = PHY_ID_KS8737,
 111         .phy_id_mask    = 0x00fffff0,
 112         .name           = "Micrel KS8737",
 113         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 114         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 115         .config_init    = kszphy_config_init,
 116         .config_aneg    = genphy_config_aneg,
 117         .read_status    = genphy_read_status,
 118         .ack_interrupt  = kszphy_ack_interrupt,
 119         .config_intr    = ks8737_config_intr,
 120         .driver         = { .owner = THIS_MODULE,},
 121 };
 122
 123 static struct phy_driver ks8041_driver = {
 124         .phy_id         = PHY_ID_KS8041,
 125         .phy_id_mask    = 0x00fffff0,
 126         .name           = "Micrel KS8041",
 127         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 128                                 | SUPPORTED_Asym_Pause),
 129         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 130         .config_init    = kszphy_config_init,
 131         .config_aneg    = genphy_config_aneg,
 132         .read_status    = genphy_read_status,
 133         .ack_interrupt  = kszphy_ack_interrupt,
 134         .config_intr    = kszphy_config_intr,
 135         .driver         = { .owner = THIS_MODULE,},
 136 };
 137
 138 static struct phy_driver ks8051_driver = {
 139         .phy_id         = PHY_ID_KS8051,
 140         .phy_id_mask    = 0x00fffff0,
 141         .name           = "Micrel KS8051",
 142         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause
 143                                 | SUPPORTED_Asym_Pause),
 144         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 145         .config_init    = kszphy_config_init,
 146         .config_aneg    = genphy_config_aneg,
 147         .read_status    = genphy_read_status,
 148         .ack_interrupt  = kszphy_ack_interrupt,
 149         .config_intr    = kszphy_config_intr,
 150         .driver         = { .owner = THIS_MODULE,},
 151 };
 152
 153 static struct phy_driver ks8001_driver = {
 154         .phy_id         = PHY_ID_KS8001,
 155         .name           = "Micrel KS8001 or KS8721",
 156         .phy_id_mask    = 0x00fffff0,
 157         .features       = (PHY_BASIC_FEATURES | SUPPORTED_Pause),
 158         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 159         .config_init    = kszphy_config_init,
 160         .config_aneg    = genphy_config_aneg,
 161         .read_status    = genphy_read_status,
 162         .ack_interrupt  = kszphy_ack_interrupt,
 163         .config_intr    = kszphy_config_intr,
 164         .driver         = { .owner = THIS_MODULE,},
 165 };
 166
 167 static struct phy_driver ksz9021_driver = {
 168         .phy_id         = PHY_ID_KSZ9021,
 169         .phy_id_mask    = 0x000fff10,
 170         .name           = "Micrel KSZ9021 Gigabit PHY",
 171         .features       = (PHY_GBIT_FEATURES | SUPPORTED_Pause
 172                                 | SUPPORTED_Asym_Pause),
 173         .flags          = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
 174         .config_init    = kszphy_config_init,
 175         .config_aneg    = genphy_config_aneg,
 176         .read_status    = genphy_read_status,
 177         .ack_interrupt  = kszphy_ack_interrupt,
 178         .config_intr    = ksz9021_config_intr,
 179         .driver         = { .owner = THIS_MODULE, },
 180 };
 181
 182 static int __init ksphy_init(void)
 183 {
 184         int ret;
 185
 186         ret = phy_driver_register(&ks8001_driver);
 187         if (ret)
 188                 goto err1;
 189
 190         ret = phy_driver_register(&ksz9021_driver);
 191         if (ret)
 192                 goto err2;
 193
 194         ret = phy_driver_register(&ks8737_driver);
 195         if (ret)
 196                 goto err3;
 197         ret = phy_driver_register(&ks8041_driver);
 198         if (ret)
 199                 goto err4;
 200         ret = phy_driver_register(&ks8051_driver);
 201         if (ret)
 202                 goto err5;
 203
 204         return 0;
 205
 206 err5:
 207         phy_driver_unregister(&ks8041_driver);
 208 err4:
 209         phy_driver_unregister(&ks8737_driver);
 210 err3:
 211         phy_driver_unregister(&ksz9021_driver);
 212 err2:
 213         phy_driver_unregister(&ks8001_driver);
 214 err1:
 215         return ret;
 216 }
 217
 218 static void __exit ksphy_exit(void)
 219 {
 220         phy_driver_unregister(&ks8001_driver);
 221         phy_driver_unregister(&ks8737_driver);
 222         phy_driver_unregister(&ksz9021_driver);
 223         phy_driver_unregister(&ks8041_driver);
 224         phy_driver_unregister(&ks8051_driver);
 225 }
 226
 227 module_init(ksphy_init);
 228 module_exit(ksphy_exit);
 229
 230 MODULE_DESCRIPTION("Micrel PHY driver");
 231 MODULE_AUTHOR("David J. Choi");
 232 MODULE_LICENSE("GPL");
 233
 234 static struct mdio_device_id micrel_tbl[] = {
 235         { PHY_ID_KSZ9021, 0x000fff10 },
 236         { PHY_ID_KS8001, 0x00fffff0 },
 237         { PHY_ID_KS8737, 0x00fffff0 },
 238         { PHY_ID_KS8041, 0x00fffff0 },
 239         { PHY_ID_KS8051, 0x00fffff0 },
 240         { }
 241 };
 242
 243 MODULE_DEVICE_TABLE(mdio, micrel_tbl);