]> git.karo-electronics.de Git - linux-beck.git/blob - drivers/net/sfc/net_driver.h
6b05d69429ee6063ca0275b9850916722d7aa23f
[linux-beck.git] / drivers / net / sfc / net_driver.h
1 /****************************************************************************
2  * Driver for Solarflare Solarstorm network controllers and boards
3  * Copyright 2005-2006 Fen Systems Ltd.
4  * Copyright 2005-2008 Solarflare Communications Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License version 2 as published
8  * by the Free Software Foundation, incorporated herein by reference.
9  */
10
11 /* Common definitions for all Efx net driver code */
12
13 #ifndef EFX_NET_DRIVER_H
14 #define EFX_NET_DRIVER_H
15
16 #include <linux/version.h>
17 #include <linux/netdevice.h>
18 #include <linux/etherdevice.h>
19 #include <linux/ethtool.h>
20 #include <linux/if_vlan.h>
21 #include <linux/timer.h>
22 #include <linux/mdio.h>
23 #include <linux/list.h>
24 #include <linux/pci.h>
25 #include <linux/device.h>
26 #include <linux/highmem.h>
27 #include <linux/workqueue.h>
28 #include <linux/i2c.h>
29
30 #include "enum.h"
31 #include "bitfield.h"
32
33 /**************************************************************************
34  *
35  * Build definitions
36  *
37  **************************************************************************/
38 #ifndef EFX_DRIVER_NAME
39 #define EFX_DRIVER_NAME "sfc"
40 #endif
41 #define EFX_DRIVER_VERSION      "2.3"
42
43 #ifdef EFX_ENABLE_DEBUG
44 #define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
45 #define EFX_WARN_ON_PARANOID(x) WARN_ON(x)
46 #else
47 #define EFX_BUG_ON_PARANOID(x) do {} while (0)
48 #define EFX_WARN_ON_PARANOID(x) do {} while (0)
49 #endif
50
51 /* Un-rate-limited logging */
52 #define EFX_ERR(efx, fmt, args...) \
53 dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
54
55 #define EFX_INFO(efx, fmt, args...) \
56 dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
57
58 #ifdef EFX_ENABLE_DEBUG
59 #define EFX_LOG(efx, fmt, args...) \
60 dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
61 #else
62 #define EFX_LOG(efx, fmt, args...) \
63 dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
64 #endif
65
66 #define EFX_TRACE(efx, fmt, args...) do {} while (0)
67
68 #define EFX_REGDUMP(efx, fmt, args...) do {} while (0)
69
70 /* Rate-limited logging */
71 #define EFX_ERR_RL(efx, fmt, args...) \
72 do {if (net_ratelimit()) EFX_ERR(efx, fmt, ##args); } while (0)
73
74 #define EFX_INFO_RL(efx, fmt, args...) \
75 do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0)
76
77 #define EFX_LOG_RL(efx, fmt, args...) \
78 do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
79
80 /**************************************************************************
81  *
82  * Efx data structures
83  *
84  **************************************************************************/
85
86 #define EFX_MAX_CHANNELS 32
87 #define EFX_MAX_RX_QUEUES EFX_MAX_CHANNELS
88
89 #define EFX_TX_QUEUE_OFFLOAD_CSUM       0
90 #define EFX_TX_QUEUE_NO_CSUM            1
91 #define EFX_TX_QUEUE_COUNT              2
92
93 /**
94  * struct efx_special_buffer - An Efx special buffer
95  * @addr: CPU base address of the buffer
96  * @dma_addr: DMA base address of the buffer
97  * @len: Buffer length, in bytes
98  * @index: Buffer index within controller;s buffer table
99  * @entries: Number of buffer table entries
100  *
101  * Special buffers are used for the event queues and the TX and RX
102  * descriptor queues for each channel.  They are *not* used for the
103  * actual transmit and receive buffers.
104  *
105  * Note that for Falcon, TX and RX descriptor queues live in host memory.
106  * Allocation and freeing procedures must take this into account.
107  */
108 struct efx_special_buffer {
109         void *addr;
110         dma_addr_t dma_addr;
111         unsigned int len;
112         int index;
113         int entries;
114 };
115
116 /**
117  * struct efx_tx_buffer - An Efx TX buffer
118  * @skb: The associated socket buffer.
119  *      Set only on the final fragment of a packet; %NULL for all other
120  *      fragments.  When this fragment completes, then we can free this
121  *      skb.
122  * @tsoh: The associated TSO header structure, or %NULL if this
123  *      buffer is not a TSO header.
124  * @dma_addr: DMA address of the fragment.
125  * @len: Length of this fragment.
126  *      This field is zero when the queue slot is empty.
127  * @continuation: True if this fragment is not the end of a packet.
128  * @unmap_single: True if pci_unmap_single should be used.
129  * @unmap_len: Length of this fragment to unmap
130  */
131 struct efx_tx_buffer {
132         const struct sk_buff *skb;
133         struct efx_tso_header *tsoh;
134         dma_addr_t dma_addr;
135         unsigned short len;
136         bool continuation;
137         bool unmap_single;
138         unsigned short unmap_len;
139 };
140
141 /**
142  * struct efx_tx_queue - An Efx TX queue
143  *
144  * This is a ring buffer of TX fragments.
145  * Since the TX completion path always executes on the same
146  * CPU and the xmit path can operate on different CPUs,
147  * performance is increased by ensuring that the completion
148  * path and the xmit path operate on different cache lines.
149  * This is particularly important if the xmit path is always
150  * executing on one CPU which is different from the completion
151  * path.  There is also a cache line for members which are
152  * read but not written on the fast path.
153  *
154  * @efx: The associated Efx NIC
155  * @queue: DMA queue number
156  * @channel: The associated channel
157  * @buffer: The software buffer ring
158  * @txd: The hardware descriptor ring
159  * @flushed: Used when handling queue flushing
160  * @read_count: Current read pointer.
161  *      This is the number of buffers that have been removed from both rings.
162  * @stopped: Stopped count.
163  *      Set if this TX queue is currently stopping its port.
164  * @insert_count: Current insert pointer
165  *      This is the number of buffers that have been added to the
166  *      software ring.
167  * @write_count: Current write pointer
168  *      This is the number of buffers that have been added to the
169  *      hardware ring.
170  * @old_read_count: The value of read_count when last checked.
171  *      This is here for performance reasons.  The xmit path will
172  *      only get the up-to-date value of read_count if this
173  *      variable indicates that the queue is full.  This is to
174  *      avoid cache-line ping-pong between the xmit path and the
175  *      completion path.
176  * @tso_headers_free: A list of TSO headers allocated for this TX queue
177  *      that are not in use, and so available for new TSO sends. The list
178  *      is protected by the TX queue lock.
179  * @tso_bursts: Number of times TSO xmit invoked by kernel
180  * @tso_long_headers: Number of packets with headers too long for standard
181  *      blocks
182  * @tso_packets: Number of packets via the TSO xmit path
183  */
184 struct efx_tx_queue {
185         /* Members which don't change on the fast path */
186         struct efx_nic *efx ____cacheline_aligned_in_smp;
187         int queue;
188         struct efx_channel *channel;
189         struct efx_nic *nic;
190         struct efx_tx_buffer *buffer;
191         struct efx_special_buffer txd;
192         bool flushed;
193
194         /* Members used mainly on the completion path */
195         unsigned int read_count ____cacheline_aligned_in_smp;
196         int stopped;
197
198         /* Members used only on the xmit path */
199         unsigned int insert_count ____cacheline_aligned_in_smp;
200         unsigned int write_count;
201         unsigned int old_read_count;
202         struct efx_tso_header *tso_headers_free;
203         unsigned int tso_bursts;
204         unsigned int tso_long_headers;
205         unsigned int tso_packets;
206 };
207
208 /**
209  * struct efx_rx_buffer - An Efx RX data buffer
210  * @dma_addr: DMA base address of the buffer
211  * @skb: The associated socket buffer, if any.
212  *      If both this and page are %NULL, the buffer slot is currently free.
213  * @page: The associated page buffer, if any.
214  *      If both this and skb are %NULL, the buffer slot is currently free.
215  * @data: Pointer to ethernet header
216  * @len: Buffer length, in bytes.
217  * @unmap_addr: DMA address to unmap
218  */
219 struct efx_rx_buffer {
220         dma_addr_t dma_addr;
221         struct sk_buff *skb;
222         struct page *page;
223         char *data;
224         unsigned int len;
225         dma_addr_t unmap_addr;
226 };
227
228 /**
229  * struct efx_rx_queue - An Efx RX queue
230  * @efx: The associated Efx NIC
231  * @queue: DMA queue number
232  * @channel: The associated channel
233  * @buffer: The software buffer ring
234  * @rxd: The hardware descriptor ring
235  * @added_count: Number of buffers added to the receive queue.
236  * @notified_count: Number of buffers given to NIC (<= @added_count).
237  * @removed_count: Number of buffers removed from the receive queue.
238  * @add_lock: Receive queue descriptor add spin lock.
239  *      This lock must be held in order to add buffers to the RX
240  *      descriptor ring (rxd and buffer) and to update added_count (but
241  *      not removed_count).
242  * @max_fill: RX descriptor maximum fill level (<= ring size)
243  * @fast_fill_trigger: RX descriptor fill level that will trigger a fast fill
244  *      (<= @max_fill)
245  * @fast_fill_limit: The level to which a fast fill will fill
246  *      (@fast_fill_trigger <= @fast_fill_limit <= @max_fill)
247  * @min_fill: RX descriptor minimum non-zero fill level.
248  *      This records the minimum fill level observed when a ring
249  *      refill was triggered.
250  * @min_overfill: RX descriptor minimum overflow fill level.
251  *      This records the minimum fill level at which RX queue
252  *      overflow was observed.  It should never be set.
253  * @alloc_page_count: RX allocation strategy counter.
254  * @alloc_skb_count: RX allocation strategy counter.
255  * @work: Descriptor push work thread
256  * @buf_page: Page for next RX buffer.
257  *      We can use a single page for multiple RX buffers. This tracks
258  *      the remaining space in the allocation.
259  * @buf_dma_addr: Page's DMA address.
260  * @buf_data: Page's host address.
261  * @flushed: Use when handling queue flushing
262  */
263 struct efx_rx_queue {
264         struct efx_nic *efx;
265         int queue;
266         struct efx_channel *channel;
267         struct efx_rx_buffer *buffer;
268         struct efx_special_buffer rxd;
269
270         int added_count;
271         int notified_count;
272         int removed_count;
273         spinlock_t add_lock;
274         unsigned int max_fill;
275         unsigned int fast_fill_trigger;
276         unsigned int fast_fill_limit;
277         unsigned int min_fill;
278         unsigned int min_overfill;
279         unsigned int alloc_page_count;
280         unsigned int alloc_skb_count;
281         struct delayed_work work;
282         unsigned int slow_fill_count;
283
284         struct page *buf_page;
285         dma_addr_t buf_dma_addr;
286         char *buf_data;
287         bool flushed;
288 };
289
290 /**
291  * struct efx_buffer - An Efx general-purpose buffer
292  * @addr: host base address of the buffer
293  * @dma_addr: DMA base address of the buffer
294  * @len: Buffer length, in bytes
295  *
296  * Falcon uses these buffers for its interrupt status registers and
297  * MAC stats dumps.
298  */
299 struct efx_buffer {
300         void *addr;
301         dma_addr_t dma_addr;
302         unsigned int len;
303 };
304
305
306 /* Flags for channel->used_flags */
307 #define EFX_USED_BY_RX 1
308 #define EFX_USED_BY_TX 2
309 #define EFX_USED_BY_RX_TX (EFX_USED_BY_RX | EFX_USED_BY_TX)
310
311 enum efx_rx_alloc_method {
312         RX_ALLOC_METHOD_AUTO = 0,
313         RX_ALLOC_METHOD_SKB = 1,
314         RX_ALLOC_METHOD_PAGE = 2,
315 };
316
317 /**
318  * struct efx_channel - An Efx channel
319  *
320  * A channel comprises an event queue, at least one TX queue, at least
321  * one RX queue, and an associated tasklet for processing the event
322  * queue.
323  *
324  * @efx: Associated Efx NIC
325  * @channel: Channel instance number
326  * @name: Name for channel and IRQ
327  * @used_flags: Channel is used by net driver
328  * @enabled: Channel enabled indicator
329  * @irq: IRQ number (MSI and MSI-X only)
330  * @irq_moderation: IRQ moderation value (in hardware ticks)
331  * @napi_dev: Net device used with NAPI
332  * @napi_str: NAPI control structure
333  * @reset_work: Scheduled reset work thread
334  * @work_pending: Is work pending via NAPI?
335  * @eventq: Event queue buffer
336  * @eventq_read_ptr: Event queue read pointer
337  * @last_eventq_read_ptr: Last event queue read pointer value.
338  * @eventq_magic: Event queue magic value for driver-generated test events
339  * @irq_count: Number of IRQs since last adaptive moderation decision
340  * @irq_mod_score: IRQ moderation score
341  * @rx_alloc_level: Watermark based heuristic counter for pushing descriptors
342  *      and diagnostic counters
343  * @rx_alloc_push_pages: RX allocation method currently in use for pushing
344  *      descriptors
345  * @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
346  * @n_rx_ip_frag_err: Count of RX IP fragment errors
347  * @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
348  * @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
349  * @n_rx_frm_trunc: Count of RX_FRM_TRUNC errors
350  * @n_rx_overlength: Count of RX_OVERLENGTH errors
351  * @n_skbuff_leaks: Count of skbuffs leaked due to RX overrun
352  */
353 struct efx_channel {
354         struct efx_nic *efx;
355         int channel;
356         char name[IFNAMSIZ + 6];
357         int used_flags;
358         bool enabled;
359         int irq;
360         unsigned int irq_moderation;
361         struct net_device *napi_dev;
362         struct napi_struct napi_str;
363         bool work_pending;
364         struct efx_special_buffer eventq;
365         unsigned int eventq_read_ptr;
366         unsigned int last_eventq_read_ptr;
367         unsigned int eventq_magic;
368
369         unsigned int irq_count;
370         unsigned int irq_mod_score;
371
372         int rx_alloc_level;
373         int rx_alloc_push_pages;
374
375         unsigned n_rx_tobe_disc;
376         unsigned n_rx_ip_frag_err;
377         unsigned n_rx_ip_hdr_chksum_err;
378         unsigned n_rx_tcp_udp_chksum_err;
379         unsigned n_rx_frm_trunc;
380         unsigned n_rx_overlength;
381         unsigned n_skbuff_leaks;
382
383         /* Used to pipeline received packets in order to optimise memory
384          * access with prefetches.
385          */
386         struct efx_rx_buffer *rx_pkt;
387         bool rx_pkt_csummed;
388
389 };
390
391 enum efx_led_mode {
392         EFX_LED_OFF     = 0,
393         EFX_LED_ON      = 1,
394         EFX_LED_DEFAULT = 2
395 };
396
397 /**
398  * struct efx_board - board information
399  * @type: Board model type
400  * @major: Major rev. ('A', 'B' ...)
401  * @minor: Minor rev. (0, 1, ...)
402  * @init: Initialisation function
403  * @init_leds: Sets up board LEDs. May be called repeatedly.
404  * @set_id_led: Set state of identifying LED or revert to automatic function
405  * @monitor: Board-specific health check function
406  * @fini: Cleanup function
407  * @hwmon_client: I2C client for hardware monitor
408  * @ioexp_client: I2C client for power/port control
409  */
410 struct efx_board {
411         int type;
412         int major;
413         int minor;
414         int (*init) (struct efx_nic *nic);
415         /* As the LEDs are typically attached to the PHY, LEDs
416          * have a separate init callback that happens later than
417          * board init. */
418         void (*init_leds)(struct efx_nic *efx);
419         void (*set_id_led) (struct efx_nic *efx, enum efx_led_mode mode);
420         int (*monitor) (struct efx_nic *nic);
421         void (*fini) (struct efx_nic *nic);
422         struct i2c_client *hwmon_client, *ioexp_client;
423 };
424
425 #define STRING_TABLE_LOOKUP(val, member)        \
426         member ## _names[val]
427
428 enum efx_int_mode {
429         /* Be careful if altering to correct macro below */
430         EFX_INT_MODE_MSIX = 0,
431         EFX_INT_MODE_MSI = 1,
432         EFX_INT_MODE_LEGACY = 2,
433         EFX_INT_MODE_MAX        /* Insert any new items before this */
434 };
435 #define EFX_INT_MODE_USE_MSI(x) (((x)->interrupt_mode) <= EFX_INT_MODE_MSI)
436
437 enum phy_type {
438         PHY_TYPE_NONE = 0,
439         PHY_TYPE_TXC43128 = 1,
440         PHY_TYPE_88E1111 = 2,
441         PHY_TYPE_SFX7101 = 3,
442         PHY_TYPE_QT2022C2 = 4,
443         PHY_TYPE_PM8358 = 6,
444         PHY_TYPE_SFT9001A = 8,
445         PHY_TYPE_QT2025C = 9,
446         PHY_TYPE_SFT9001B = 10,
447         PHY_TYPE_MAX    /* Insert any new items before this */
448 };
449
450 #define EFX_IS10G(efx) ((efx)->link_speed == 10000)
451
452 enum nic_state {
453         STATE_INIT = 0,
454         STATE_RUNNING = 1,
455         STATE_FINI = 2,
456         STATE_DISABLED = 3,
457         STATE_MAX,
458 };
459
460 /*
461  * Alignment of page-allocated RX buffers
462  *
463  * Controls the number of bytes inserted at the start of an RX buffer.
464  * This is the equivalent of NET_IP_ALIGN [which controls the alignment
465  * of the skb->head for hardware DMA].
466  */
467 #ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
468 #define EFX_PAGE_IP_ALIGN 0
469 #else
470 #define EFX_PAGE_IP_ALIGN NET_IP_ALIGN
471 #endif
472
473 /*
474  * Alignment of the skb->head which wraps a page-allocated RX buffer
475  *
476  * The skb allocated to wrap an rx_buffer can have this alignment. Since
477  * the data is memcpy'd from the rx_buf, it does not need to be equal to
478  * EFX_PAGE_IP_ALIGN.
479  */
480 #define EFX_PAGE_SKB_ALIGN 2
481
482 /* Forward declaration */
483 struct efx_nic;
484
485 /* Pseudo bit-mask flow control field */
486 enum efx_fc_type {
487         EFX_FC_RX = FLOW_CTRL_RX,
488         EFX_FC_TX = FLOW_CTRL_TX,
489         EFX_FC_AUTO = 4,
490 };
491
492 /* Supported MAC bit-mask */
493 enum efx_mac_type {
494         EFX_GMAC = 1,
495         EFX_XMAC = 2,
496 };
497
498 /**
499  * struct efx_mac_operations - Efx MAC operations table
500  * @reconfigure: Reconfigure MAC. Serialised by the mac_lock
501  * @update_stats: Update statistics
502  * @irq: Hardware MAC event callback. Serialised by the mac_lock
503  * @poll: Poll for hardware state. Serialised by the mac_lock
504  */
505 struct efx_mac_operations {
506         void (*reconfigure) (struct efx_nic *efx);
507         void (*update_stats) (struct efx_nic *efx);
508         void (*irq) (struct efx_nic *efx);
509         void (*poll) (struct efx_nic *efx);
510 };
511
512 /**
513  * struct efx_phy_operations - Efx PHY operations table
514  * @init: Initialise PHY
515  * @fini: Shut down PHY
516  * @reconfigure: Reconfigure PHY (e.g. for new link parameters)
517  * @clear_interrupt: Clear down interrupt
518  * @poll: Poll for hardware state. Serialised by the mac_lock.
519  * @get_settings: Get ethtool settings. Serialised by the mac_lock.
520  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
521  * @set_npage_adv: Set abilities advertised in (Extended) Next Page
522  *      (only needed where AN bit is set in mmds)
523  * @num_tests: Number of PHY-specific tests/results
524  * @test_names: Names of the tests/results
525  * @run_tests: Run tests and record results as appropriate.
526  *      Flags are the ethtool tests flags.
527  * @mmds: MMD presence mask
528  * @loopbacks: Supported loopback modes mask
529  */
530 struct efx_phy_operations {
531         enum efx_mac_type macs;
532         int (*init) (struct efx_nic *efx);
533         void (*fini) (struct efx_nic *efx);
534         void (*reconfigure) (struct efx_nic *efx);
535         void (*clear_interrupt) (struct efx_nic *efx);
536         void (*poll) (struct efx_nic *efx);
537         void (*get_settings) (struct efx_nic *efx,
538                               struct ethtool_cmd *ecmd);
539         int (*set_settings) (struct efx_nic *efx,
540                              struct ethtool_cmd *ecmd);
541         void (*set_npage_adv) (struct efx_nic *efx, u32);
542         u32 num_tests;
543         const char *const *test_names;
544         int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
545         int mmds;
546         unsigned loopbacks;
547 };
548
549 /**
550  * @enum efx_phy_mode - PHY operating mode flags
551  * @PHY_MODE_NORMAL: on and should pass traffic
552  * @PHY_MODE_TX_DISABLED: on with TX disabled
553  * @PHY_MODE_LOW_POWER: set to low power through MDIO
554  * @PHY_MODE_OFF: switched off through external control
555  * @PHY_MODE_SPECIAL: on but will not pass traffic
556  */
557 enum efx_phy_mode {
558         PHY_MODE_NORMAL         = 0,
559         PHY_MODE_TX_DISABLED    = 1,
560         PHY_MODE_LOW_POWER      = 2,
561         PHY_MODE_OFF            = 4,
562         PHY_MODE_SPECIAL        = 8,
563 };
564
565 static inline bool efx_phy_mode_disabled(enum efx_phy_mode mode)
566 {
567         return !!(mode & ~PHY_MODE_TX_DISABLED);
568 }
569
570 /*
571  * Efx extended statistics
572  *
573  * Not all statistics are provided by all supported MACs.  The purpose
574  * is this structure is to contain the raw statistics provided by each
575  * MAC.
576  */
577 struct efx_mac_stats {
578         u64 tx_bytes;
579         u64 tx_good_bytes;
580         u64 tx_bad_bytes;
581         unsigned long tx_packets;
582         unsigned long tx_bad;
583         unsigned long tx_pause;
584         unsigned long tx_control;
585         unsigned long tx_unicast;
586         unsigned long tx_multicast;
587         unsigned long tx_broadcast;
588         unsigned long tx_lt64;
589         unsigned long tx_64;
590         unsigned long tx_65_to_127;
591         unsigned long tx_128_to_255;
592         unsigned long tx_256_to_511;
593         unsigned long tx_512_to_1023;
594         unsigned long tx_1024_to_15xx;
595         unsigned long tx_15xx_to_jumbo;
596         unsigned long tx_gtjumbo;
597         unsigned long tx_collision;
598         unsigned long tx_single_collision;
599         unsigned long tx_multiple_collision;
600         unsigned long tx_excessive_collision;
601         unsigned long tx_deferred;
602         unsigned long tx_late_collision;
603         unsigned long tx_excessive_deferred;
604         unsigned long tx_non_tcpudp;
605         unsigned long tx_mac_src_error;
606         unsigned long tx_ip_src_error;
607         u64 rx_bytes;
608         u64 rx_good_bytes;
609         u64 rx_bad_bytes;
610         unsigned long rx_packets;
611         unsigned long rx_good;
612         unsigned long rx_bad;
613         unsigned long rx_pause;
614         unsigned long rx_control;
615         unsigned long rx_unicast;
616         unsigned long rx_multicast;
617         unsigned long rx_broadcast;
618         unsigned long rx_lt64;
619         unsigned long rx_64;
620         unsigned long rx_65_to_127;
621         unsigned long rx_128_to_255;
622         unsigned long rx_256_to_511;
623         unsigned long rx_512_to_1023;
624         unsigned long rx_1024_to_15xx;
625         unsigned long rx_15xx_to_jumbo;
626         unsigned long rx_gtjumbo;
627         unsigned long rx_bad_lt64;
628         unsigned long rx_bad_64_to_15xx;
629         unsigned long rx_bad_15xx_to_jumbo;
630         unsigned long rx_bad_gtjumbo;
631         unsigned long rx_overflow;
632         unsigned long rx_missed;
633         unsigned long rx_false_carrier;
634         unsigned long rx_symbol_error;
635         unsigned long rx_align_error;
636         unsigned long rx_length_error;
637         unsigned long rx_internal_error;
638         unsigned long rx_good_lt64;
639 };
640
641 /* Number of bits used in a multicast filter hash address */
642 #define EFX_MCAST_HASH_BITS 8
643
644 /* Number of (single-bit) entries in a multicast filter hash */
645 #define EFX_MCAST_HASH_ENTRIES (1 << EFX_MCAST_HASH_BITS)
646
647 /* An Efx multicast filter hash */
648 union efx_multicast_hash {
649         u8 byte[EFX_MCAST_HASH_ENTRIES / 8];
650         efx_oword_t oword[EFX_MCAST_HASH_ENTRIES / sizeof(efx_oword_t) / 8];
651 };
652
653 /**
654  * struct efx_nic - an Efx NIC
655  * @name: Device name (net device name or bus id before net device registered)
656  * @pci_dev: The PCI device
657  * @type: Controller type attributes
658  * @legacy_irq: IRQ number
659  * @workqueue: Workqueue for port reconfigures and the HW monitor.
660  *      Work items do not hold and must not acquire RTNL.
661  * @workqueue_name: Name of workqueue
662  * @reset_work: Scheduled reset workitem
663  * @monitor_work: Hardware monitor workitem
664  * @membase_phys: Memory BAR value as physical address
665  * @membase: Memory BAR value
666  * @biu_lock: BIU (bus interface unit) lock
667  * @interrupt_mode: Interrupt mode
668  * @irq_rx_adaptive: Adaptive IRQ moderation enabled for RX event queues
669  * @irq_rx_moderation: IRQ moderation time for RX event queues
670  * @i2c_adap: I2C adapter
671  * @board_info: Board-level information
672  * @state: Device state flag. Serialised by the rtnl_lock.
673  * @reset_pending: Pending reset method (normally RESET_TYPE_NONE)
674  * @tx_queue: TX DMA queues
675  * @rx_queue: RX DMA queues
676  * @channel: Channels
677  * @next_buffer_table: First available buffer table id
678  * @n_rx_queues: Number of RX queues
679  * @n_channels: Number of channels in use
680  * @rx_buffer_len: RX buffer length
681  * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
682  * @int_error_count: Number of internal errors seen recently
683  * @int_error_expire: Time at which error count will be expired
684  * @irq_status: Interrupt status buffer
685  * @last_irq_cpu: Last CPU to handle interrupt.
686  *      This register is written with the SMP processor ID whenever an
687  *      interrupt is handled.  It is used by falcon_test_interrupt()
688  *      to verify that an interrupt has occurred.
689  * @spi_flash: SPI flash device
690  *      This field will be %NULL if no flash device is present.
691  * @spi_eeprom: SPI EEPROM device
692  *      This field will be %NULL if no EEPROM device is present.
693  * @spi_lock: SPI bus lock
694  * @n_rx_nodesc_drop_cnt: RX no descriptor drop count
695  * @nic_data: Hardware dependant state
696  * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
697  *      @port_inhibited, efx_monitor() and efx_reconfigure_port()
698  * @port_enabled: Port enabled indicator.
699  *      Serialises efx_stop_all(), efx_start_all(), efx_monitor(),
700  *      efx_phy_work(), and efx_mac_work() with kernel interfaces. Safe to read
701  *      under any one of the rtnl_lock, mac_lock, or netif_tx_lock, but all
702  *      three must be held to modify it.
703  * @port_inhibited: If set, the netif_carrier is always off. Hold the mac_lock
704  * @port_initialized: Port initialized?
705  * @net_dev: Operating system network device. Consider holding the rtnl lock
706  * @rx_checksum_enabled: RX checksumming enabled
707  * @netif_stop_count: Port stop count
708  * @netif_stop_lock: Port stop lock
709  * @mac_stats: MAC statistics. These include all statistics the MACs
710  *      can provide.  Generic code converts these into a standard
711  *      &struct net_device_stats.
712  * @stats_buffer: DMA buffer for statistics
713  * @stats_lock: Statistics update lock. Serialises statistics fetches
714  * @stats_disable_count: Nest count for disabling statistics fetches
715  * @mac_op: MAC interface
716  * @mac_address: Permanent MAC address
717  * @phy_type: PHY type
718  * @phy_lock: PHY access lock
719  * @phy_op: PHY interface
720  * @phy_data: PHY private data (including PHY-specific stats)
721  * @mdio: PHY MDIO interface
722  * @phy_mode: PHY operating mode. Serialised by @mac_lock.
723  * @mac_up: MAC link state
724  * @link_up: Link status
725  * @link_fd: Link is full duplex
726  * @link_fc: Actualy flow control flags
727  * @link_speed: Link speed (Mbps)
728  * @n_link_state_changes: Number of times the link has changed state
729  * @promiscuous: Promiscuous flag. Protected by netif_tx_lock.
730  * @multicast_hash: Multicast hash table
731  * @wanted_fc: Wanted flow control flags
732  * @phy_work: work item for dealing with PHY events
733  * @mac_work: work item for dealing with MAC events
734  * @loopback_mode: Loopback status
735  * @loopback_modes: Supported loopback mode bitmask
736  * @loopback_selftest: Offline self-test private state
737  *
738  * The @priv field of the corresponding &struct net_device points to
739  * this.
740  */
741 struct efx_nic {
742         char name[IFNAMSIZ];
743         struct pci_dev *pci_dev;
744         const struct efx_nic_type *type;
745         int legacy_irq;
746         struct workqueue_struct *workqueue;
747         char workqueue_name[16];
748         struct work_struct reset_work;
749         struct delayed_work monitor_work;
750         resource_size_t membase_phys;
751         void __iomem *membase;
752         spinlock_t biu_lock;
753         enum efx_int_mode interrupt_mode;
754         bool irq_rx_adaptive;
755         unsigned int irq_rx_moderation;
756
757         struct i2c_adapter i2c_adap;
758         struct efx_board board_info;
759
760         enum nic_state state;
761         enum reset_type reset_pending;
762
763         struct efx_tx_queue tx_queue[EFX_TX_QUEUE_COUNT];
764         struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
765         struct efx_channel channel[EFX_MAX_CHANNELS];
766
767         unsigned next_buffer_table;
768         int n_rx_queues;
769         int n_channels;
770         unsigned int rx_buffer_len;
771         unsigned int rx_buffer_order;
772
773         unsigned int_error_count;
774         unsigned long int_error_expire;
775
776         struct efx_buffer irq_status;
777         volatile signed int last_irq_cpu;
778
779         struct efx_spi_device *spi_flash;
780         struct efx_spi_device *spi_eeprom;
781         struct mutex spi_lock;
782
783         unsigned n_rx_nodesc_drop_cnt;
784
785         struct falcon_nic_data *nic_data;
786
787         struct mutex mac_lock;
788         struct work_struct mac_work;
789         bool port_enabled;
790         bool port_inhibited;
791
792         bool port_initialized;
793         struct net_device *net_dev;
794         bool rx_checksum_enabled;
795
796         atomic_t netif_stop_count;
797         spinlock_t netif_stop_lock;
798
799         struct efx_mac_stats mac_stats;
800         struct efx_buffer stats_buffer;
801         spinlock_t stats_lock;
802         unsigned int stats_disable_count;
803
804         struct efx_mac_operations *mac_op;
805         unsigned char mac_address[ETH_ALEN];
806
807         enum phy_type phy_type;
808         spinlock_t phy_lock;
809         struct work_struct phy_work;
810         struct efx_phy_operations *phy_op;
811         void *phy_data;
812         struct mdio_if_info mdio;
813         enum efx_phy_mode phy_mode;
814
815         bool mac_up;
816         bool link_up;
817         bool link_fd;
818         enum efx_fc_type link_fc;
819         unsigned int link_speed;
820         unsigned int n_link_state_changes;
821
822         bool promiscuous;
823         union efx_multicast_hash multicast_hash;
824         enum efx_fc_type wanted_fc;
825
826         atomic_t rx_reset;
827         enum efx_loopback_mode loopback_mode;
828         unsigned int loopback_modes;
829
830         void *loopback_selftest;
831 };
832
833 static inline int efx_dev_registered(struct efx_nic *efx)
834 {
835         return efx->net_dev->reg_state == NETREG_REGISTERED;
836 }
837
838 /* Net device name, for inclusion in log messages if it has been registered.
839  * Use efx->name not efx->net_dev->name so that races with (un)registration
840  * are harmless.
841  */
842 static inline const char *efx_dev_name(struct efx_nic *efx)
843 {
844         return efx_dev_registered(efx) ? efx->name : "";
845 }
846
847 /**
848  * struct efx_nic_type - Efx device type definition
849  * @mem_map_size: Memory BAR mapped size
850  * @txd_ptr_tbl_base: TX descriptor ring base address
851  * @rxd_ptr_tbl_base: RX descriptor ring base address
852  * @buf_tbl_base: Buffer table base address
853  * @evq_ptr_tbl_base: Event queue pointer table base address
854  * @evq_rptr_tbl_base: Event queue read-pointer table base address
855  * @max_dma_mask: Maximum possible DMA mask
856  * @rx_buffer_padding: Padding added to each RX buffer
857  * @max_interrupt_mode: Highest capability interrupt mode supported
858  *      from &enum efx_init_mode.
859  * @phys_addr_channels: Number of channels with physically addressed
860  *      descriptors
861  */
862 struct efx_nic_type {
863         unsigned int mem_map_size;
864         unsigned int txd_ptr_tbl_base;
865         unsigned int rxd_ptr_tbl_base;
866         unsigned int buf_tbl_base;
867         unsigned int evq_ptr_tbl_base;
868         unsigned int evq_rptr_tbl_base;
869
870         u64 max_dma_mask;
871
872         unsigned int rx_buffer_padding;
873         unsigned int max_interrupt_mode;
874         unsigned int phys_addr_channels;
875 };
876
877 /**************************************************************************
878  *
879  * Prototypes and inline functions
880  *
881  *************************************************************************/
882
883 /* Iterate over all used channels */
884 #define efx_for_each_channel(_channel, _efx)                            \
885         for (_channel = &_efx->channel[0];                              \
886              _channel < &_efx->channel[EFX_MAX_CHANNELS];               \
887              _channel++)                                                \
888                 if (!_channel->used_flags)                              \
889                         continue;                                       \
890                 else
891
892 /* Iterate over all used TX queues */
893 #define efx_for_each_tx_queue(_tx_queue, _efx)                          \
894         for (_tx_queue = &_efx->tx_queue[0];                            \
895              _tx_queue < &_efx->tx_queue[EFX_TX_QUEUE_COUNT];           \
896              _tx_queue++)
897
898 /* Iterate over all TX queues belonging to a channel */
899 #define efx_for_each_channel_tx_queue(_tx_queue, _channel)              \
900         for (_tx_queue = &_channel->efx->tx_queue[0];                   \
901              _tx_queue < &_channel->efx->tx_queue[EFX_TX_QUEUE_COUNT];  \
902              _tx_queue++)                                               \
903                 if (_tx_queue->channel != _channel)                     \
904                         continue;                                       \
905                 else
906
907 /* Iterate over all used RX queues */
908 #define efx_for_each_rx_queue(_rx_queue, _efx)                          \
909         for (_rx_queue = &_efx->rx_queue[0];                            \
910              _rx_queue < &_efx->rx_queue[_efx->n_rx_queues];            \
911              _rx_queue++)
912
913 /* Iterate over all RX queues belonging to a channel */
914 #define efx_for_each_channel_rx_queue(_rx_queue, _channel)              \
915         for (_rx_queue = &_channel->efx->rx_queue[_channel->channel];   \
916              _rx_queue;                                                 \
917              _rx_queue = NULL)                                          \
918                 if (_rx_queue->channel != _channel)                     \
919                         continue;                                       \
920                 else
921
922 /* Returns a pointer to the specified receive buffer in the RX
923  * descriptor queue.
924  */
925 static inline struct efx_rx_buffer *efx_rx_buffer(struct efx_rx_queue *rx_queue,
926                                                   unsigned int index)
927 {
928         return (&rx_queue->buffer[index]);
929 }
930
931 /* Set bit in a little-endian bitfield */
932 static inline void set_bit_le(unsigned nr, unsigned char *addr)
933 {
934         addr[nr / 8] |= (1 << (nr % 8));
935 }
936
937 /* Clear bit in a little-endian bitfield */
938 static inline void clear_bit_le(unsigned nr, unsigned char *addr)
939 {
940         addr[nr / 8] &= ~(1 << (nr % 8));
941 }
942
943
944 /**
945  * EFX_MAX_FRAME_LEN - calculate maximum frame length
946  *
947  * This calculates the maximum frame length that will be used for a
948  * given MTU.  The frame length will be equal to the MTU plus a
949  * constant amount of header space and padding.  This is the quantity
950  * that the net driver will program into the MAC as the maximum frame
951  * length.
952  *
953  * The 10G MAC used in Falcon requires 8-byte alignment on the frame
954  * length, so we round up to the nearest 8.
955  *
956  * Re-clocking by the XGXS on RX can reduce an IPG to 32 bits (half an
957  * XGMII cycle).  If the frame length reaches the maximum value in the
958  * same cycle, the XMAC can miss the IPG altogether.  We work around
959  * this by adding a further 16 bytes.
960  */
961 #define EFX_MAX_FRAME_LEN(mtu) \
962         ((((mtu) + ETH_HLEN + VLAN_HLEN + 4/* FCS */ + 7) & ~7) + 16)
963
964
965 #endif /* EFX_NET_DRIVER_H */