]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/wan/cosa.c
COSA/SRP: convert channel_data.rsem to mutex
[karo-tx-linux.git] / drivers / net / wan / cosa.c
1 /* $Id: cosa.c,v 1.31 2000/03/08 17:47:16 kas Exp $ */
2
3 /*
4  *  Copyright (C) 1995-1997  Jan "Yenya" Kasprzak <kas@fi.muni.cz>
5  *
6  *  This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation; either version 2 of the License, or
9  *  (at your option) any later version.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *  GNU General Public License for more details.
15  *
16  *  You should have received a copy of the GNU General Public License
17  *  along with this program; if not, write to the Free Software
18  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19  */
20
21 /*
22  * The driver for the SRP and COSA synchronous serial cards.
23  *
24  * HARDWARE INFO
25  *
26  * Both cards are developed at the Institute of Computer Science,
27  * Masaryk University (http://www.ics.muni.cz/). The hardware is
28  * developed by Jiri Novotny <novotny@ics.muni.cz>. More information
29  * and the photo of both cards is available at
30  * http://www.pavoucek.cz/cosa.html. The card documentation, firmwares
31  * and other goods can be downloaded from ftp://ftp.ics.muni.cz/pub/cosa/.
32  * For Linux-specific utilities, see below in the "Software info" section.
33  * If you want to order the card, contact Jiri Novotny.
34  *
35  * The SRP (serial port?, the Czech word "srp" means "sickle") card
36  * is a 2-port intelligent (with its own 8-bit CPU) synchronous serial card
37  * with V.24 interfaces up to 80kb/s each.
38  *
39  * The COSA (communication serial adapter?, the Czech word "kosa" means
40  * "scythe") is a next-generation sync/async board with two interfaces
41  * - currently any of V.24, X.21, V.35 and V.36 can be selected.
42  * It has a 16-bit SAB80166 CPU and can do up to 10 Mb/s per channel.
43  * The 8-channels version is in development.
44  *
45  * Both types have downloadable firmware and communicate via ISA DMA.
46  * COSA can be also a bus-mastering device.
47  *
48  * SOFTWARE INFO
49  *
50  * The homepage of the Linux driver is at http://www.fi.muni.cz/~kas/cosa/.
51  * The CVS tree of Linux driver can be viewed there, as well as the
52  * firmware binaries and user-space utilities for downloading the firmware
53  * into the card and setting up the card.
54  *
55  * The Linux driver (unlike the present *BSD drivers :-) can work even
56  * for the COSA and SRP in one computer and allows each channel to work
57  * in one of the three modes (character device, Cisco HDLC, Sync PPP).
58  *
59  * AUTHOR
60  *
61  * The Linux driver was written by Jan "Yenya" Kasprzak <kas@fi.muni.cz>.
62  *
63  * You can mail me bugfixes and even success reports. I am especially
64  * interested in the SMP and/or muliti-channel success/failure reports
65  * (I wonder if I did the locking properly :-).
66  *
67  * THE AUTHOR USED THE FOLLOWING SOURCES WHEN PROGRAMMING THE DRIVER
68  *
69  * The COSA/SRP NetBSD driver by Zdenek Salvet and Ivos Cernohlavek
70  * The skeleton.c by Donald Becker
71  * The SDL Riscom/N2 driver by Mike Natale
72  * The Comtrol Hostess SV11 driver by Alan Cox
73  * The Sync PPP/Cisco HDLC layer (syncppp.c) ported to Linux by Alan Cox
74  */
75 /*
76  *     5/25/1999 : Marcelo Tosatti <marcelo@conectiva.com.br>
77  *             fixed a deadlock in cosa_sppp_open
78  */
79 \f
80 /* ---------- Headers, macros, data structures ---------- */
81
82 #include <linux/module.h>
83 #include <linux/kernel.h>
84 #include <linux/slab.h>
85 #include <linux/poll.h>
86 #include <linux/fs.h>
87 #include <linux/interrupt.h>
88 #include <linux/delay.h>
89 #include <linux/errno.h>
90 #include <linux/ioport.h>
91 #include <linux/netdevice.h>
92 #include <linux/spinlock.h>
93 #include <linux/mutex.h>
94 #include <linux/device.h>
95
96 #undef COSA_SLOW_IO     /* for testing purposes only */
97
98 #include <asm/io.h>
99 #include <asm/dma.h>
100 #include <asm/byteorder.h>
101
102 #include <net/syncppp.h>
103 #include "cosa.h"
104
105 /* Maximum length of the identification string. */
106 #define COSA_MAX_ID_STRING      128
107
108 /* Maximum length of the channel name */
109 #define COSA_MAX_NAME           (sizeof("cosaXXXcXXX")+1)
110
111 /* Per-channel data structure */
112
113 struct channel_data {
114         void *if_ptr;   /* General purpose pointer (used by SPPP) */
115         int usage;      /* Usage count; >0 for chrdev, -1 for netdev */
116         int num;        /* Number of the channel */
117         struct cosa_data *cosa; /* Pointer to the per-card structure */
118         int txsize;     /* Size of transmitted data */
119         char *txbuf;    /* Transmit buffer */
120         char name[COSA_MAX_NAME];       /* channel name */
121
122         /* The HW layer interface */
123         /* routine called from the RX interrupt */
124         char *(*setup_rx)(struct channel_data *channel, int size);
125         /* routine called when the RX is done (from the EOT interrupt) */
126         int (*rx_done)(struct channel_data *channel);
127         /* routine called when the TX is done (from the EOT interrupt) */
128         int (*tx_done)(struct channel_data *channel, int size);
129
130         /* Character device parts */
131         struct mutex rlock;
132         struct semaphore wsem;
133         char *rxdata;
134         int rxsize;
135         wait_queue_head_t txwaitq, rxwaitq;
136         int tx_status, rx_status;
137
138         /* SPPP/HDLC device parts */
139         struct ppp_device pppdev;
140         struct sk_buff *rx_skb, *tx_skb;
141         struct net_device_stats stats;
142 };
143
144 /* cosa->firmware_status bits */
145 #define COSA_FW_RESET           (1<<0)  /* Is the ROM monitor active? */
146 #define COSA_FW_DOWNLOAD        (1<<1)  /* Is the microcode downloaded? */
147 #define COSA_FW_START           (1<<2)  /* Is the microcode running? */
148
149 struct cosa_data {
150         int num;                        /* Card number */
151         char name[COSA_MAX_NAME];       /* Card name - e.g "cosa0" */
152         unsigned int datareg, statusreg;        /* I/O ports */
153         unsigned short irq, dma;        /* IRQ and DMA number */
154         unsigned short startaddr;       /* Firmware start address */
155         unsigned short busmaster;       /* Use busmastering? */
156         int nchannels;                  /* # of channels on this card */
157         int driver_status;              /* For communicating with firmware */
158         int firmware_status;            /* Downloaded, reseted, etc. */
159         unsigned long rxbitmap, txbitmap;/* Bitmap of channels who are willing to send/receive data */
160         unsigned long rxtx;             /* RX or TX in progress? */
161         int enabled;
162         int usage;                              /* usage count */
163         int txchan, txsize, rxsize;
164         struct channel_data *rxchan;
165         char *bouncebuf;
166         char *txbuf, *rxbuf;
167         struct channel_data *chan;
168         spinlock_t lock;        /* For exclusive operations on this structure */
169         char id_string[COSA_MAX_ID_STRING];     /* ROM monitor ID string */
170         char *type;                             /* card type */
171 };
172
173 /*
174  * Define this if you want all the possible ports to be autoprobed.
175  * It is here but it probably is not a good idea to use this.
176  */
177 /* #define COSA_ISA_AUTOPROBE   1 */
178
179 /*
180  * Character device major number. 117 was allocated for us.
181  * The value of 0 means to allocate a first free one.
182  */
183 static int cosa_major = 117;
184
185 /*
186  * Encoding of the minor numbers:
187  * The lowest CARD_MINOR_BITS bits means the channel on the single card,
188  * the highest bits means the card number.
189  */
190 #define CARD_MINOR_BITS 4       /* How many bits in minor number are reserved
191                                  * for the single card */
192 /*
193  * The following depends on CARD_MINOR_BITS. Unfortunately, the "MODULE_STRING"
194  * macro doesn't like anything other than the raw number as an argument :-(
195  */
196 #define MAX_CARDS       16
197 /* #define MAX_CARDS    (1 << (8-CARD_MINOR_BITS)) */
198
199 #define DRIVER_RX_READY         0x0001
200 #define DRIVER_TX_READY         0x0002
201 #define DRIVER_TXMAP_SHIFT      2
202 #define DRIVER_TXMAP_MASK       0x0c    /* FIXME: 0xfc for 8-channel version */
203
204 /*
205  * for cosa->rxtx - indicates whether either transmit or receive is
206  * in progress. These values are mean number of the bit.
207  */
208 #define TXBIT 0
209 #define RXBIT 1
210 #define IRQBIT 2
211
212 #define COSA_MTU 2000   /* FIXME: I don't know this exactly */
213
214 #undef DEBUG_DATA //1   /* Dump the data read or written to the channel */
215 #undef DEBUG_IRQS //1   /* Print the message when the IRQ is received */
216 #undef DEBUG_IO   //1   /* Dump the I/O traffic */
217
218 #define TX_TIMEOUT      (5*HZ)
219
220 /* Maybe the following should be allocated dynamically */
221 static struct cosa_data cosa_cards[MAX_CARDS];
222 static int nr_cards;
223
224 #ifdef COSA_ISA_AUTOPROBE
225 static int io[MAX_CARDS+1]  = { 0x220, 0x228, 0x210, 0x218, 0, };
226 /* NOTE: DMA is not autoprobed!!! */
227 static int dma[MAX_CARDS+1] = { 1, 7, 1, 7, 1, 7, 1, 7, 0, };
228 #else
229 static int io[MAX_CARDS+1];
230 static int dma[MAX_CARDS+1];
231 #endif
232 /* IRQ can be safely autoprobed */
233 static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, };
234
235 /* for class stuff*/
236 static struct class *cosa_class;
237
238 #ifdef MODULE
239 module_param_array(io, int, NULL, 0);
240 MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards");
241 module_param_array(irq, int, NULL, 0);
242 MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards");
243 module_param_array(dma, int, NULL, 0);
244 MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards");
245
246 MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>");
247 MODULE_DESCRIPTION("Modular driver for the COSA or SRP synchronous card");
248 MODULE_LICENSE("GPL");
249 #endif
250
251 /* I use this mainly for testing purposes */
252 #ifdef COSA_SLOW_IO
253 #define cosa_outb outb_p
254 #define cosa_outw outw_p
255 #define cosa_inb  inb_p
256 #define cosa_inw  inw_p
257 #else
258 #define cosa_outb outb
259 #define cosa_outw outw
260 #define cosa_inb  inb
261 #define cosa_inw  inw
262 #endif
263
264 #define is_8bit(cosa)           (!(cosa->datareg & 0x08))
265
266 #define cosa_getstatus(cosa)    (cosa_inb(cosa->statusreg))
267 #define cosa_putstatus(cosa, stat)      (cosa_outb(stat, cosa->statusreg))
268 #define cosa_getdata16(cosa)    (cosa_inw(cosa->datareg))
269 #define cosa_getdata8(cosa)     (cosa_inb(cosa->datareg))
270 #define cosa_putdata16(cosa, dt)        (cosa_outw(dt, cosa->datareg))
271 #define cosa_putdata8(cosa, dt) (cosa_outb(dt, cosa->datareg))
272
273 /* Initialization stuff */
274 static int cosa_probe(int ioaddr, int irq, int dma);
275
276 /* HW interface */
277 static void cosa_enable_rx(struct channel_data *chan);
278 static void cosa_disable_rx(struct channel_data *chan);
279 static int cosa_start_tx(struct channel_data *channel, char *buf, int size);
280 static void cosa_kick(struct cosa_data *cosa);
281 static int cosa_dma_able(struct channel_data *chan, char *buf, int data);
282
283 /* SPPP/HDLC stuff */
284 static void sppp_channel_init(struct channel_data *chan);
285 static void sppp_channel_delete(struct channel_data *chan);
286 static int cosa_sppp_open(struct net_device *d);
287 static int cosa_sppp_close(struct net_device *d);
288 static void cosa_sppp_timeout(struct net_device *d);
289 static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *d);
290 static char *sppp_setup_rx(struct channel_data *channel, int size);
291 static int sppp_rx_done(struct channel_data *channel);
292 static int sppp_tx_done(struct channel_data *channel, int size);
293 static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
294 static struct net_device_stats *cosa_net_stats(struct net_device *dev);
295
296 /* Character device */
297 static void chardev_channel_init(struct channel_data *chan);
298 static char *chrdev_setup_rx(struct channel_data *channel, int size);
299 static int chrdev_rx_done(struct channel_data *channel);
300 static int chrdev_tx_done(struct channel_data *channel, int size);
301 static ssize_t cosa_read(struct file *file,
302         char __user *buf, size_t count, loff_t *ppos);
303 static ssize_t cosa_write(struct file *file,
304         const char __user *buf, size_t count, loff_t *ppos);
305 static unsigned int cosa_poll(struct file *file, poll_table *poll);
306 static int cosa_open(struct inode *inode, struct file *file);
307 static int cosa_release(struct inode *inode, struct file *file);
308 static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
309         unsigned int cmd, unsigned long arg);
310 #ifdef COSA_FASYNC_WORKING
311 static int cosa_fasync(struct inode *inode, struct file *file, int on);
312 #endif
313
314 static const struct file_operations cosa_fops = {
315         .owner          = THIS_MODULE,
316         .llseek         = no_llseek,
317         .read           = cosa_read,
318         .write          = cosa_write,
319         .poll           = cosa_poll,
320         .ioctl          = cosa_chardev_ioctl,
321         .open           = cosa_open,
322         .release        = cosa_release,
323 #ifdef COSA_FASYNC_WORKING
324         .fasync         = cosa_fasync,
325 #endif
326 };
327
328 /* Ioctls */
329 static int cosa_start(struct cosa_data *cosa, int address);
330 static int cosa_reset(struct cosa_data *cosa);
331 static int cosa_download(struct cosa_data *cosa, void __user *a);
332 static int cosa_readmem(struct cosa_data *cosa, void __user *a);
333
334 /* COSA/SRP ROM monitor */
335 static int download(struct cosa_data *cosa, const char __user *data, int addr, int len);
336 static int startmicrocode(struct cosa_data *cosa, int address);
337 static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
338 static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);
339
340 /* Auxilliary functions */
341 static int get_wait_data(struct cosa_data *cosa);
342 static int put_wait_data(struct cosa_data *cosa, int data);
343 static int puthexnumber(struct cosa_data *cosa, int number);
344 static void put_driver_status(struct cosa_data *cosa);
345 static void put_driver_status_nolock(struct cosa_data *cosa);
346
347 /* Interrupt handling */
348 static irqreturn_t cosa_interrupt(int irq, void *cosa);
349
350 /* I/O ops debugging */
351 #ifdef DEBUG_IO
352 static void debug_data_in(struct cosa_data *cosa, int data);
353 static void debug_data_out(struct cosa_data *cosa, int data);
354 static void debug_data_cmd(struct cosa_data *cosa, int data);
355 static void debug_status_in(struct cosa_data *cosa, int status);
356 static void debug_status_out(struct cosa_data *cosa, int status);
357 #endif
358
359 \f
360 /* ---------- Initialization stuff ---------- */
361
362 static int __init cosa_init(void)
363 {
364         int i, err = 0;
365
366         printk(KERN_INFO "cosa v1.08 (c) 1997-2000 Jan Kasprzak <kas@fi.muni.cz>\n");
367 #ifdef CONFIG_SMP
368         printk(KERN_INFO "cosa: SMP found. Please mail any success/failure reports to the author.\n");
369 #endif
370         if (cosa_major > 0) {
371                 if (register_chrdev(cosa_major, "cosa", &cosa_fops)) {
372                         printk(KERN_WARNING "cosa: unable to get major %d\n",
373                                 cosa_major);
374                         err = -EIO;
375                         goto out;
376                 }
377         } else {
378                 if (!(cosa_major=register_chrdev(0, "cosa", &cosa_fops))) {
379                         printk(KERN_WARNING "cosa: unable to register chardev\n");
380                         err = -EIO;
381                         goto out;
382                 }
383         }
384         for (i=0; i<MAX_CARDS; i++)
385                 cosa_cards[i].num = -1;
386         for (i=0; io[i] != 0 && i < MAX_CARDS; i++)
387                 cosa_probe(io[i], irq[i], dma[i]);
388         if (!nr_cards) {
389                 printk(KERN_WARNING "cosa: no devices found.\n");
390                 unregister_chrdev(cosa_major, "cosa");
391                 err = -ENODEV;
392                 goto out;
393         }
394         cosa_class = class_create(THIS_MODULE, "cosa");
395         if (IS_ERR(cosa_class)) {
396                 err = PTR_ERR(cosa_class);
397                 goto out_chrdev;
398         }
399         for (i=0; i<nr_cards; i++) {
400                 device_create(cosa_class, NULL, MKDEV(cosa_major, i), "cosa%d", i);
401         }
402         err = 0;
403         goto out;
404         
405 out_chrdev:
406         unregister_chrdev(cosa_major, "cosa");
407 out:
408         return err;
409 }
410 module_init(cosa_init);
411
412 static void __exit cosa_exit(void)
413 {
414         struct cosa_data *cosa;
415         int i;
416         printk(KERN_INFO "Unloading the cosa module\n");
417
418         for (i=0; i<nr_cards; i++)
419                 device_destroy(cosa_class, MKDEV(cosa_major, i));
420         class_destroy(cosa_class);
421         for (cosa=cosa_cards; nr_cards--; cosa++) {
422                 /* Clean up the per-channel data */
423                 for (i=0; i<cosa->nchannels; i++) {
424                         /* Chardev driver has no alloc'd per-channel data */
425                         sppp_channel_delete(cosa->chan+i);
426                 }
427                 /* Clean up the per-card data */
428                 kfree(cosa->chan);
429                 kfree(cosa->bouncebuf);
430                 free_irq(cosa->irq, cosa);
431                 free_dma(cosa->dma);
432                 release_region(cosa->datareg,is_8bit(cosa)?2:4);
433         }
434         unregister_chrdev(cosa_major, "cosa");
435 }
436 module_exit(cosa_exit);
437
438 /*
439  * This function should register all the net devices needed for the
440  * single channel.
441  */
442 static __inline__ void channel_init(struct channel_data *chan)
443 {
444         sprintf(chan->name, "cosa%dc%d", chan->cosa->num, chan->num);
445
446         /* Initialize the chardev data structures */
447         chardev_channel_init(chan);
448
449         /* Register the sppp interface */
450         sppp_channel_init(chan);
451 }
452         
453 static int cosa_probe(int base, int irq, int dma)
454 {
455         struct cosa_data *cosa = cosa_cards+nr_cards;
456         int i, err = 0;
457
458         memset(cosa, 0, sizeof(struct cosa_data));
459
460         /* Checking validity of parameters: */
461         /* IRQ should be 2-7 or 10-15; negative IRQ means autoprobe */
462         if ((irq >= 0  && irq < 2) || irq > 15 || (irq < 10 && irq > 7)) {
463                 printk (KERN_INFO "cosa_probe: invalid IRQ %d\n", irq);
464                 return -1;
465         }
466         /* I/O address should be between 0x100 and 0x3ff and should be
467          * multiple of 8. */
468         if (base < 0x100 || base > 0x3ff || base & 0x7) {
469                 printk (KERN_INFO "cosa_probe: invalid I/O address 0x%x\n",
470                         base);
471                 return -1;
472         }
473         /* DMA should be 0,1 or 3-7 */
474         if (dma < 0 || dma == 4 || dma > 7) {
475                 printk (KERN_INFO "cosa_probe: invalid DMA %d\n", dma);
476                 return -1;
477         }
478         /* and finally, on 16-bit COSA DMA should be 4-7 and 
479          * I/O base should not be multiple of 0x10 */
480         if (((base & 0x8) && dma < 4) || (!(base & 0x8) && dma > 3)) {
481                 printk (KERN_INFO "cosa_probe: 8/16 bit base and DMA mismatch"
482                         " (base=0x%x, dma=%d)\n", base, dma);
483                 return -1;
484         }
485
486         cosa->dma = dma;
487         cosa->datareg = base;
488         cosa->statusreg = is_8bit(cosa)?base+1:base+2;
489         spin_lock_init(&cosa->lock);
490
491         if (!request_region(base, is_8bit(cosa)?2:4,"cosa"))
492                 return -1;
493         
494         if (cosa_reset_and_read_id(cosa, cosa->id_string) < 0) {
495                 printk(KERN_DEBUG "cosa: probe at 0x%x failed.\n", base);
496                 err = -1;
497                 goto err_out;
498         }
499
500         /* Test the validity of identification string */
501         if (!strncmp(cosa->id_string, "SRP", 3))
502                 cosa->type = "srp";
503         else if (!strncmp(cosa->id_string, "COSA", 4))
504                 cosa->type = is_8bit(cosa)? "cosa8": "cosa16";
505         else {
506 /* Print a warning only if we are not autoprobing */
507 #ifndef COSA_ISA_AUTOPROBE
508                 printk(KERN_INFO "cosa: valid signature not found at 0x%x.\n",
509                         base);
510 #endif
511                 err = -1;
512                 goto err_out;
513         }
514         /* Update the name of the region now we know the type of card */ 
515         release_region(base, is_8bit(cosa)?2:4);
516         if (!request_region(base, is_8bit(cosa)?2:4, cosa->type)) {
517                 printk(KERN_DEBUG "cosa: changing name at 0x%x failed.\n", base);
518                 return -1;
519         }
520
521         /* Now do IRQ autoprobe */
522         if (irq < 0) {
523                 unsigned long irqs;
524 /*              printk(KERN_INFO "IRQ autoprobe\n"); */
525                 irqs = probe_irq_on();
526                 /* 
527                  * Enable interrupt on tx buffer empty (it sure is) 
528                  * really sure ?
529                  * FIXME: When this code is not used as module, we should
530                  * probably call udelay() instead of the interruptible sleep.
531                  */
532                 set_current_state(TASK_INTERRUPTIBLE);
533                 cosa_putstatus(cosa, SR_TX_INT_ENA);
534                 schedule_timeout(30);
535                 irq = probe_irq_off(irqs);
536                 /* Disable all IRQs from the card */
537                 cosa_putstatus(cosa, 0);
538                 /* Empty the received data register */
539                 cosa_getdata8(cosa);
540
541                 if (irq < 0) {
542                         printk (KERN_INFO "cosa IRQ autoprobe: multiple interrupts obtained (%d, board at 0x%x)\n",
543                                 irq, cosa->datareg);
544                         err = -1;
545                         goto err_out;
546                 }
547                 if (irq == 0) {
548                         printk (KERN_INFO "cosa IRQ autoprobe: no interrupt obtained (board at 0x%x)\n",
549                                 cosa->datareg);
550                 /*      return -1; */
551                 }
552         }
553
554         cosa->irq = irq;
555         cosa->num = nr_cards;
556         cosa->usage = 0;
557         cosa->nchannels = 2;    /* FIXME: how to determine this? */
558
559         if (request_irq(cosa->irq, cosa_interrupt, 0, cosa->type, cosa)) {
560                 err = -1;
561                 goto err_out;
562         }
563         if (request_dma(cosa->dma, cosa->type)) {
564                 err = -1;
565                 goto err_out1;
566         }
567         
568         cosa->bouncebuf = kmalloc(COSA_MTU, GFP_KERNEL|GFP_DMA);
569         if (!cosa->bouncebuf) {
570                 err = -ENOMEM;
571                 goto err_out2;
572         }
573         sprintf(cosa->name, "cosa%d", cosa->num);
574
575         /* Initialize the per-channel data */
576         cosa->chan = kcalloc(cosa->nchannels, sizeof(struct channel_data), GFP_KERNEL);
577         if (!cosa->chan) {
578                 err = -ENOMEM;
579                 goto err_out3;
580         }
581         for (i=0; i<cosa->nchannels; i++) {
582                 cosa->chan[i].cosa = cosa;
583                 cosa->chan[i].num = i;
584                 channel_init(cosa->chan+i);
585         }
586
587         printk (KERN_INFO "cosa%d: %s (%s at 0x%x irq %d dma %d), %d channels\n",
588                 cosa->num, cosa->id_string, cosa->type,
589                 cosa->datareg, cosa->irq, cosa->dma, cosa->nchannels);
590
591         return nr_cards++;
592 err_out3:
593         kfree(cosa->bouncebuf);
594 err_out2:
595         free_dma(cosa->dma);
596 err_out1:
597         free_irq(cosa->irq, cosa);
598 err_out:        
599         release_region(cosa->datareg,is_8bit(cosa)?2:4);
600         printk(KERN_NOTICE "cosa%d: allocating resources failed\n",
601                cosa->num);
602         return err;
603 }
604
605 \f
606 /*---------- SPPP/HDLC netdevice ---------- */
607
608 static void cosa_setup(struct net_device *d)
609 {
610         d->open = cosa_sppp_open;
611         d->stop = cosa_sppp_close;
612         d->hard_start_xmit = cosa_sppp_tx;
613         d->do_ioctl = cosa_sppp_ioctl;
614         d->get_stats = cosa_net_stats;
615         d->tx_timeout = cosa_sppp_timeout;
616         d->watchdog_timeo = TX_TIMEOUT;
617 }
618
619 static void sppp_channel_init(struct channel_data *chan)
620 {
621         struct net_device *d;
622         chan->if_ptr = &chan->pppdev;
623         d = alloc_netdev(0, chan->name, cosa_setup);
624         if (!d) {
625                 printk(KERN_WARNING "%s: alloc_netdev failed.\n", chan->name);
626                 return;
627         }
628         chan->pppdev.dev = d;
629         d->base_addr = chan->cosa->datareg;
630         d->irq = chan->cosa->irq;
631         d->dma = chan->cosa->dma;
632         d->priv = chan;
633         sppp_attach(&chan->pppdev);
634         if (register_netdev(d)) {
635                 printk(KERN_WARNING "%s: register_netdev failed.\n", d->name);
636                 sppp_detach(d);
637                 free_netdev(d);
638                 chan->pppdev.dev = NULL;
639                 return;
640         }
641 }
642
643 static void sppp_channel_delete(struct channel_data *chan)
644 {
645         unregister_netdev(chan->pppdev.dev);
646         sppp_detach(chan->pppdev.dev);
647         free_netdev(chan->pppdev.dev);
648         chan->pppdev.dev = NULL;
649 }
650
651 static int cosa_sppp_open(struct net_device *d)
652 {
653         struct channel_data *chan = d->priv;
654         int err;
655         unsigned long flags;
656
657         if (!(chan->cosa->firmware_status & COSA_FW_START)) {
658                 printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
659                         chan->cosa->name, chan->cosa->firmware_status);
660                 return -EPERM;
661         }
662         spin_lock_irqsave(&chan->cosa->lock, flags);
663         if (chan->usage != 0) {
664                 printk(KERN_WARNING "%s: sppp_open called with usage count %d\n",
665                         chan->name, chan->usage);
666                 spin_unlock_irqrestore(&chan->cosa->lock, flags);
667                 return -EBUSY;
668         }
669         chan->setup_rx = sppp_setup_rx;
670         chan->tx_done = sppp_tx_done;
671         chan->rx_done = sppp_rx_done;
672         chan->usage=-1;
673         chan->cosa->usage++;
674         spin_unlock_irqrestore(&chan->cosa->lock, flags);
675
676         err = sppp_open(d);
677         if (err) {
678                 spin_lock_irqsave(&chan->cosa->lock, flags);
679                 chan->usage=0;
680                 chan->cosa->usage--;
681                 
682                 spin_unlock_irqrestore(&chan->cosa->lock, flags);
683                 return err;
684         }
685
686         netif_start_queue(d);
687         cosa_enable_rx(chan);
688         return 0;
689 }
690
691 static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
692 {
693         struct channel_data *chan = dev->priv;
694
695         netif_stop_queue(dev);
696
697         chan->tx_skb = skb;
698         cosa_start_tx(chan, skb->data, skb->len);
699         return 0;
700 }
701
702 static void cosa_sppp_timeout(struct net_device *dev)
703 {
704         struct channel_data *chan = dev->priv;
705
706         if (test_bit(RXBIT, &chan->cosa->rxtx)) {
707                 chan->stats.rx_errors++;
708                 chan->stats.rx_missed_errors++;
709         } else {
710                 chan->stats.tx_errors++;
711                 chan->stats.tx_aborted_errors++;
712         }
713         cosa_kick(chan->cosa);
714         if (chan->tx_skb) {
715                 dev_kfree_skb(chan->tx_skb);
716                 chan->tx_skb = NULL;
717         }
718         netif_wake_queue(dev);
719 }
720
721 static int cosa_sppp_close(struct net_device *d)
722 {
723         struct channel_data *chan = d->priv;
724         unsigned long flags;
725
726         netif_stop_queue(d);
727         sppp_close(d);
728         cosa_disable_rx(chan);
729         spin_lock_irqsave(&chan->cosa->lock, flags);
730         if (chan->rx_skb) {
731                 kfree_skb(chan->rx_skb);
732                 chan->rx_skb = NULL;
733         }
734         if (chan->tx_skb) {
735                 kfree_skb(chan->tx_skb);
736                 chan->tx_skb = NULL;
737         }
738         chan->usage=0;
739         chan->cosa->usage--;
740         spin_unlock_irqrestore(&chan->cosa->lock, flags);
741         return 0;
742 }
743
744 static char *sppp_setup_rx(struct channel_data *chan, int size)
745 {
746         /*
747          * We can safely fall back to non-dma-able memory, because we have
748          * the cosa->bouncebuf pre-allocated.
749          */
750         if (chan->rx_skb)
751                 kfree_skb(chan->rx_skb);
752         chan->rx_skb = dev_alloc_skb(size);
753         if (chan->rx_skb == NULL) {
754                 printk(KERN_NOTICE "%s: Memory squeeze, dropping packet\n",
755                         chan->name);
756                 chan->stats.rx_dropped++;
757                 return NULL;
758         }
759         chan->pppdev.dev->trans_start = jiffies;
760         return skb_put(chan->rx_skb, size);
761 }
762
763 static int sppp_rx_done(struct channel_data *chan)
764 {
765         if (!chan->rx_skb) {
766                 printk(KERN_WARNING "%s: rx_done with empty skb!\n",
767                         chan->name);
768                 chan->stats.rx_errors++;
769                 chan->stats.rx_frame_errors++;
770                 return 0;
771         }
772         chan->rx_skb->protocol = htons(ETH_P_WAN_PPP);
773         chan->rx_skb->dev = chan->pppdev.dev;
774         skb_reset_mac_header(chan->rx_skb);
775         chan->stats.rx_packets++;
776         chan->stats.rx_bytes += chan->cosa->rxsize;
777         netif_rx(chan->rx_skb);
778         chan->rx_skb = NULL;
779         chan->pppdev.dev->last_rx = jiffies;
780         return 0;
781 }
782
783 /* ARGSUSED */
784 static int sppp_tx_done(struct channel_data *chan, int size)
785 {
786         if (!chan->tx_skb) {
787                 printk(KERN_WARNING "%s: tx_done with empty skb!\n",
788                         chan->name);
789                 chan->stats.tx_errors++;
790                 chan->stats.tx_aborted_errors++;
791                 return 1;
792         }
793         dev_kfree_skb_irq(chan->tx_skb);
794         chan->tx_skb = NULL;
795         chan->stats.tx_packets++;
796         chan->stats.tx_bytes += size;
797         netif_wake_queue(chan->pppdev.dev);
798         return 1;
799 }
800
801 static struct net_device_stats *cosa_net_stats(struct net_device *dev)
802 {
803         struct channel_data *chan = dev->priv;
804         return &chan->stats;
805 }
806
807 \f
808 /*---------- Character device ---------- */
809
810 static void chardev_channel_init(struct channel_data *chan)
811 {
812         mutex_init(&chan->rlock);
813         init_MUTEX(&chan->wsem);
814 }
815
816 static ssize_t cosa_read(struct file *file,
817         char __user *buf, size_t count, loff_t *ppos)
818 {
819         DECLARE_WAITQUEUE(wait, current);
820         unsigned long flags;
821         struct channel_data *chan = file->private_data;
822         struct cosa_data *cosa = chan->cosa;
823         char *kbuf;
824
825         if (!(cosa->firmware_status & COSA_FW_START)) {
826                 printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
827                         cosa->name, cosa->firmware_status);
828                 return -EPERM;
829         }
830         if (mutex_lock_interruptible(&chan->rlock))
831                 return -ERESTARTSYS;
832         
833         if ((chan->rxdata = kmalloc(COSA_MTU, GFP_DMA|GFP_KERNEL)) == NULL) {
834                 printk(KERN_INFO "%s: cosa_read() - OOM\n", cosa->name);
835                 mutex_unlock(&chan->rlock);
836                 return -ENOMEM;
837         }
838
839         chan->rx_status = 0;
840         cosa_enable_rx(chan);
841         spin_lock_irqsave(&cosa->lock, flags);
842         add_wait_queue(&chan->rxwaitq, &wait);
843         while(!chan->rx_status) {
844                 current->state = TASK_INTERRUPTIBLE;
845                 spin_unlock_irqrestore(&cosa->lock, flags);
846                 schedule();
847                 spin_lock_irqsave(&cosa->lock, flags);
848                 if (signal_pending(current) && chan->rx_status == 0) {
849                         chan->rx_status = 1;
850                         remove_wait_queue(&chan->rxwaitq, &wait);
851                         current->state = TASK_RUNNING;
852                         spin_unlock_irqrestore(&cosa->lock, flags);
853                         mutex_unlock(&chan->rlock);
854                         return -ERESTARTSYS;
855                 }
856         }
857         remove_wait_queue(&chan->rxwaitq, &wait);
858         current->state = TASK_RUNNING;
859         kbuf = chan->rxdata;
860         count = chan->rxsize;
861         spin_unlock_irqrestore(&cosa->lock, flags);
862         mutex_unlock(&chan->rlock);
863
864         if (copy_to_user(buf, kbuf, count)) {
865                 kfree(kbuf);
866                 return -EFAULT;
867         }
868         kfree(kbuf);
869         return count;
870 }
871
872 static char *chrdev_setup_rx(struct channel_data *chan, int size)
873 {
874         /* Expect size <= COSA_MTU */
875         chan->rxsize = size;
876         return chan->rxdata;
877 }
878
879 static int chrdev_rx_done(struct channel_data *chan)
880 {
881         if (chan->rx_status) { /* Reader has died */
882                 kfree(chan->rxdata);
883                 up(&chan->wsem);
884         }
885         chan->rx_status = 1;
886         wake_up_interruptible(&chan->rxwaitq);
887         return 1;
888 }
889
890
891 static ssize_t cosa_write(struct file *file,
892         const char __user *buf, size_t count, loff_t *ppos)
893 {
894         DECLARE_WAITQUEUE(wait, current);
895         struct channel_data *chan = file->private_data;
896         struct cosa_data *cosa = chan->cosa;
897         unsigned long flags;
898         char *kbuf;
899
900         if (!(cosa->firmware_status & COSA_FW_START)) {
901                 printk(KERN_NOTICE "%s: start the firmware first (status %d)\n",
902                         cosa->name, cosa->firmware_status);
903                 return -EPERM;
904         }
905         if (down_interruptible(&chan->wsem))
906                 return -ERESTARTSYS;
907
908         if (count > COSA_MTU)
909                 count = COSA_MTU;
910         
911         /* Allocate the buffer */
912         if ((kbuf = kmalloc(count, GFP_KERNEL|GFP_DMA)) == NULL) {
913                 printk(KERN_NOTICE "%s: cosa_write() OOM - dropping packet\n",
914                         cosa->name);
915                 up(&chan->wsem);
916                 return -ENOMEM;
917         }
918         if (copy_from_user(kbuf, buf, count)) {
919                 up(&chan->wsem);
920                 kfree(kbuf);
921                 return -EFAULT;
922         }
923         chan->tx_status=0;
924         cosa_start_tx(chan, kbuf, count);
925
926         spin_lock_irqsave(&cosa->lock, flags);
927         add_wait_queue(&chan->txwaitq, &wait);
928         while(!chan->tx_status) {
929                 current->state = TASK_INTERRUPTIBLE;
930                 spin_unlock_irqrestore(&cosa->lock, flags);
931                 schedule();
932                 spin_lock_irqsave(&cosa->lock, flags);
933                 if (signal_pending(current) && chan->tx_status == 0) {
934                         chan->tx_status = 1;
935                         remove_wait_queue(&chan->txwaitq, &wait);
936                         current->state = TASK_RUNNING;
937                         chan->tx_status = 1;
938                         spin_unlock_irqrestore(&cosa->lock, flags);
939                         return -ERESTARTSYS;
940                 }
941         }
942         remove_wait_queue(&chan->txwaitq, &wait);
943         current->state = TASK_RUNNING;
944         up(&chan->wsem);
945         spin_unlock_irqrestore(&cosa->lock, flags);
946         kfree(kbuf);
947         return count;
948 }
949
950 static int chrdev_tx_done(struct channel_data *chan, int size)
951 {
952         if (chan->tx_status) { /* Writer was interrupted */
953                 kfree(chan->txbuf);
954                 up(&chan->wsem);
955         }
956         chan->tx_status = 1;
957         wake_up_interruptible(&chan->txwaitq);
958         return 1;
959 }
960
961 static unsigned int cosa_poll(struct file *file, poll_table *poll)
962 {
963         printk(KERN_INFO "cosa_poll is here\n");
964         return 0;
965 }
966
967 static int cosa_open(struct inode *inode, struct file *file)
968 {
969         struct cosa_data *cosa;
970         struct channel_data *chan;
971         unsigned long flags;
972         int n;
973
974         if ((n=iminor(file->f_path.dentry->d_inode)>>CARD_MINOR_BITS)
975                 >= nr_cards)
976                 return -ENODEV;
977         cosa = cosa_cards+n;
978
979         if ((n=iminor(file->f_path.dentry->d_inode)
980                 & ((1<<CARD_MINOR_BITS)-1)) >= cosa->nchannels)
981                 return -ENODEV;
982         chan = cosa->chan + n;
983         
984         file->private_data = chan;
985
986         spin_lock_irqsave(&cosa->lock, flags);
987
988         if (chan->usage < 0) { /* in netdev mode */
989                 spin_unlock_irqrestore(&cosa->lock, flags);
990                 return -EBUSY;
991         }
992         cosa->usage++;
993         chan->usage++;
994
995         chan->tx_done = chrdev_tx_done;
996         chan->setup_rx = chrdev_setup_rx;
997         chan->rx_done = chrdev_rx_done;
998         spin_unlock_irqrestore(&cosa->lock, flags);
999         return 0;
1000 }
1001
1002 static int cosa_release(struct inode *inode, struct file *file)
1003 {
1004         struct channel_data *channel = file->private_data;
1005         struct cosa_data *cosa;
1006         unsigned long flags;
1007
1008         cosa = channel->cosa;
1009         spin_lock_irqsave(&cosa->lock, flags);
1010         cosa->usage--;
1011         channel->usage--;
1012         spin_unlock_irqrestore(&cosa->lock, flags);
1013         return 0;
1014 }
1015
1016 #ifdef COSA_FASYNC_WORKING
1017 static struct fasync_struct *fasync[256] = { NULL, };
1018
1019 /* To be done ... */
1020 static int cosa_fasync(struct inode *inode, struct file *file, int on)
1021 {
1022         int port = iminor(inode);
1023         int rv = fasync_helper(inode, file, on, &fasync[port]);
1024         return rv < 0 ? rv : 0;
1025 }
1026 #endif
1027
1028 \f
1029 /* ---------- Ioctls ---------- */
1030
1031 /*
1032  * Ioctl subroutines can safely be made inline, because they are called
1033  * only from cosa_ioctl().
1034  */
1035 static inline int cosa_reset(struct cosa_data *cosa)
1036 {
1037         char idstring[COSA_MAX_ID_STRING];
1038         if (cosa->usage > 1)
1039                 printk(KERN_INFO "cosa%d: WARNING: reset requested with cosa->usage > 1 (%d). Odd things may happen.\n",
1040                         cosa->num, cosa->usage);
1041         cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_START);
1042         if (cosa_reset_and_read_id(cosa, idstring) < 0) {
1043                 printk(KERN_NOTICE "cosa%d: reset failed\n", cosa->num);
1044                 return -EIO;
1045         }
1046         printk(KERN_INFO "cosa%d: resetting device: %s\n", cosa->num,
1047                 idstring);
1048         cosa->firmware_status |= COSA_FW_RESET;
1049         return 0;
1050 }
1051
1052 /* High-level function to download data into COSA memory. Calls download() */
1053 static inline int cosa_download(struct cosa_data *cosa, void __user *arg)
1054 {
1055         struct cosa_download d;
1056         int i;
1057
1058         if (cosa->usage > 1)
1059                 printk(KERN_INFO "%s: WARNING: download of microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
1060                         cosa->name, cosa->usage);
1061         if (!(cosa->firmware_status & COSA_FW_RESET)) {
1062                 printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
1063                         cosa->name, cosa->firmware_status);
1064                 return -EPERM;
1065         }
1066         
1067         if (copy_from_user(&d, arg, sizeof(d)))
1068                 return -EFAULT;
1069
1070         if (d.addr < 0 || d.addr > COSA_MAX_FIRMWARE_SIZE)
1071                 return -EINVAL;
1072         if (d.len < 0 || d.len > COSA_MAX_FIRMWARE_SIZE)
1073                 return -EINVAL;
1074
1075
1076         /* If something fails, force the user to reset the card */
1077         cosa->firmware_status &= ~(COSA_FW_RESET|COSA_FW_DOWNLOAD);
1078
1079         i = download(cosa, d.code, d.len, d.addr);
1080         if (i < 0) {
1081                 printk(KERN_NOTICE "cosa%d: microcode download failed: %d\n",
1082                         cosa->num, i);
1083                 return -EIO;
1084         }
1085         printk(KERN_INFO "cosa%d: downloading microcode - 0x%04x bytes at 0x%04x\n",
1086                 cosa->num, d.len, d.addr);
1087         cosa->firmware_status |= COSA_FW_RESET|COSA_FW_DOWNLOAD;
1088         return 0;
1089 }
1090
1091 /* High-level function to read COSA memory. Calls readmem() */
1092 static inline int cosa_readmem(struct cosa_data *cosa, void __user *arg)
1093 {
1094         struct cosa_download d;
1095         int i;
1096
1097         if (cosa->usage > 1)
1098                 printk(KERN_INFO "cosa%d: WARNING: readmem requested with "
1099                         "cosa->usage > 1 (%d). Odd things may happen.\n",
1100                         cosa->num, cosa->usage);
1101         if (!(cosa->firmware_status & COSA_FW_RESET)) {
1102                 printk(KERN_NOTICE "%s: reset the card first (status %d).\n",
1103                         cosa->name, cosa->firmware_status);
1104                 return -EPERM;
1105         }
1106
1107         if (copy_from_user(&d, arg, sizeof(d)))
1108                 return -EFAULT;
1109
1110         /* If something fails, force the user to reset the card */
1111         cosa->firmware_status &= ~COSA_FW_RESET;
1112
1113         i = readmem(cosa, d.code, d.len, d.addr);
1114         if (i < 0) {
1115                 printk(KERN_NOTICE "cosa%d: reading memory failed: %d\n",
1116                         cosa->num, i);
1117                 return -EIO;
1118         }
1119         printk(KERN_INFO "cosa%d: reading card memory - 0x%04x bytes at 0x%04x\n",
1120                 cosa->num, d.len, d.addr);
1121         cosa->firmware_status |= COSA_FW_RESET;
1122         return 0;
1123 }
1124
1125 /* High-level function to start microcode. Calls startmicrocode(). */
1126 static inline int cosa_start(struct cosa_data *cosa, int address)
1127 {
1128         int i;
1129
1130         if (cosa->usage > 1)
1131                 printk(KERN_INFO "cosa%d: WARNING: start microcode requested with cosa->usage > 1 (%d). Odd things may happen.\n",
1132                         cosa->num, cosa->usage);
1133
1134         if ((cosa->firmware_status & (COSA_FW_RESET|COSA_FW_DOWNLOAD))
1135                 != (COSA_FW_RESET|COSA_FW_DOWNLOAD)) {
1136                 printk(KERN_NOTICE "%s: download the microcode and/or reset the card first (status %d).\n",
1137                         cosa->name, cosa->firmware_status);
1138                 return -EPERM;
1139         }
1140         cosa->firmware_status &= ~COSA_FW_RESET;
1141         if ((i=startmicrocode(cosa, address)) < 0) {
1142                 printk(KERN_NOTICE "cosa%d: start microcode at 0x%04x failed: %d\n",
1143                         cosa->num, address, i);
1144                 return -EIO;
1145         }
1146         printk(KERN_INFO "cosa%d: starting microcode at 0x%04x\n",
1147                 cosa->num, address);
1148         cosa->startaddr = address;
1149         cosa->firmware_status |= COSA_FW_START;
1150         return 0;
1151 }
1152                 
1153 /* Buffer of size at least COSA_MAX_ID_STRING is expected */
1154 static inline int cosa_getidstr(struct cosa_data *cosa, char __user *string)
1155 {
1156         int l = strlen(cosa->id_string)+1;
1157         if (copy_to_user(string, cosa->id_string, l))
1158                 return -EFAULT;
1159         return l;
1160 }
1161
1162 /* Buffer of size at least COSA_MAX_ID_STRING is expected */
1163 static inline int cosa_gettype(struct cosa_data *cosa, char __user *string)
1164 {
1165         int l = strlen(cosa->type)+1;
1166         if (copy_to_user(string, cosa->type, l))
1167                 return -EFAULT;
1168         return l;
1169 }
1170
1171 static int cosa_ioctl_common(struct cosa_data *cosa,
1172         struct channel_data *channel, unsigned int cmd, unsigned long arg)
1173 {
1174         void __user *argp = (void __user *)arg;
1175         switch(cmd) {
1176         case COSAIORSET:        /* Reset the device */
1177                 if (!capable(CAP_NET_ADMIN))
1178                         return -EACCES;
1179                 return cosa_reset(cosa);
1180         case COSAIOSTRT:        /* Start the firmware */
1181                 if (!capable(CAP_SYS_RAWIO))
1182                         return -EACCES;
1183                 return cosa_start(cosa, arg);
1184         case COSAIODOWNLD:      /* Download the firmware */
1185                 if (!capable(CAP_SYS_RAWIO))
1186                         return -EACCES;
1187                 
1188                 return cosa_download(cosa, argp);
1189         case COSAIORMEM:
1190                 if (!capable(CAP_SYS_RAWIO))
1191                         return -EACCES;
1192                 return cosa_readmem(cosa, argp);
1193         case COSAIORTYPE:
1194                 return cosa_gettype(cosa, argp);
1195         case COSAIORIDSTR:
1196                 return cosa_getidstr(cosa, argp);
1197         case COSAIONRCARDS:
1198                 return nr_cards;
1199         case COSAIONRCHANS:
1200                 return cosa->nchannels;
1201         case COSAIOBMSET:
1202                 if (!capable(CAP_SYS_RAWIO))
1203                         return -EACCES;
1204                 if (is_8bit(cosa))
1205                         return -EINVAL;
1206                 if (arg != COSA_BM_OFF && arg != COSA_BM_ON)
1207                         return -EINVAL;
1208                 cosa->busmaster = arg;
1209                 return 0;
1210         case COSAIOBMGET:
1211                 return cosa->busmaster;
1212         }
1213         return -ENOIOCTLCMD;
1214 }
1215
1216 static int cosa_sppp_ioctl(struct net_device *dev, struct ifreq *ifr,
1217         int cmd)
1218 {
1219         int rv;
1220         struct channel_data *chan = dev->priv;
1221         rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data);
1222         if (rv == -ENOIOCTLCMD) {
1223                 return sppp_do_ioctl(dev, ifr, cmd);
1224         }
1225         return rv;
1226 }
1227
1228 static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
1229         unsigned int cmd, unsigned long arg)
1230 {
1231         struct channel_data *channel = file->private_data;
1232         struct cosa_data *cosa = channel->cosa;
1233         return cosa_ioctl_common(cosa, channel, cmd, arg);
1234 }
1235
1236 \f
1237 /*---------- HW layer interface ---------- */
1238
1239 /*
1240  * The higher layer can bind itself to the HW layer by setting the callbacks
1241  * in the channel_data structure and by using these routines.
1242  */
1243 static void cosa_enable_rx(struct channel_data *chan)
1244 {
1245         struct cosa_data *cosa = chan->cosa;
1246
1247         if (!test_and_set_bit(chan->num, &cosa->rxbitmap))
1248                 put_driver_status(cosa);
1249 }
1250
1251 static void cosa_disable_rx(struct channel_data *chan)
1252 {
1253         struct cosa_data *cosa = chan->cosa;
1254
1255         if (test_and_clear_bit(chan->num, &cosa->rxbitmap))
1256                 put_driver_status(cosa);
1257 }
1258
1259 /*
1260  * FIXME: This routine probably should check for cosa_start_tx() called when
1261  * the previous transmit is still unfinished. In this case the non-zero
1262  * return value should indicate to the caller that the queuing(sp?) up
1263  * the transmit has failed.
1264  */
1265 static int cosa_start_tx(struct channel_data *chan, char *buf, int len)
1266 {
1267         struct cosa_data *cosa = chan->cosa;
1268         unsigned long flags;
1269 #ifdef DEBUG_DATA
1270         int i;
1271
1272         printk(KERN_INFO "cosa%dc%d: starting tx(0x%x)", chan->cosa->num,
1273                 chan->num, len);
1274         for (i=0; i<len; i++)
1275                 printk(" %02x", buf[i]&0xff);
1276         printk("\n");
1277 #endif
1278         spin_lock_irqsave(&cosa->lock, flags);
1279         chan->txbuf = buf;
1280         chan->txsize = len;
1281         if (len > COSA_MTU)
1282                 chan->txsize = COSA_MTU;
1283         spin_unlock_irqrestore(&cosa->lock, flags);
1284
1285         /* Tell the firmware we are ready */
1286         set_bit(chan->num, &cosa->txbitmap);
1287         put_driver_status(cosa);
1288
1289         return 0;
1290 }
1291
1292 static void put_driver_status(struct cosa_data *cosa)
1293 {
1294         unsigned long flags;
1295         int status;
1296
1297         spin_lock_irqsave(&cosa->lock, flags);
1298
1299         status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
1300                 | (cosa->txbitmap ? DRIVER_TX_READY : 0)
1301                 | (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
1302                         &DRIVER_TXMAP_MASK : 0);
1303         if (!cosa->rxtx) {
1304                 if (cosa->rxbitmap|cosa->txbitmap) {
1305                         if (!cosa->enabled) {
1306                                 cosa_putstatus(cosa, SR_RX_INT_ENA);
1307 #ifdef DEBUG_IO
1308                                 debug_status_out(cosa, SR_RX_INT_ENA);
1309 #endif
1310                                 cosa->enabled = 1;
1311                         }
1312                 } else if (cosa->enabled) {
1313                         cosa->enabled = 0;
1314                         cosa_putstatus(cosa, 0);
1315 #ifdef DEBUG_IO
1316                         debug_status_out(cosa, 0);
1317 #endif
1318                 }
1319                 cosa_putdata8(cosa, status);
1320 #ifdef DEBUG_IO
1321                 debug_data_cmd(cosa, status);
1322 #endif
1323         }
1324         spin_unlock_irqrestore(&cosa->lock, flags);
1325 }
1326
1327 static void put_driver_status_nolock(struct cosa_data *cosa)
1328 {
1329         int status;
1330
1331         status = (cosa->rxbitmap ? DRIVER_RX_READY : 0)
1332                 | (cosa->txbitmap ? DRIVER_TX_READY : 0)
1333                 | (cosa->txbitmap? ~(cosa->txbitmap<<DRIVER_TXMAP_SHIFT)
1334                         &DRIVER_TXMAP_MASK : 0);
1335
1336         if (cosa->rxbitmap|cosa->txbitmap) {
1337                 cosa_putstatus(cosa, SR_RX_INT_ENA);
1338 #ifdef DEBUG_IO
1339                 debug_status_out(cosa, SR_RX_INT_ENA);
1340 #endif
1341                 cosa->enabled = 1;
1342         } else {
1343                 cosa_putstatus(cosa, 0);
1344 #ifdef DEBUG_IO
1345                 debug_status_out(cosa, 0);
1346 #endif
1347                 cosa->enabled = 0;
1348         }
1349         cosa_putdata8(cosa, status);
1350 #ifdef DEBUG_IO
1351         debug_data_cmd(cosa, status);
1352 #endif
1353 }
1354
1355 /*
1356  * The "kickme" function: When the DMA times out, this is called to
1357  * clean up the driver status.
1358  * FIXME: Preliminary support, the interface is probably wrong.
1359  */
1360 static void cosa_kick(struct cosa_data *cosa)
1361 {
1362         unsigned long flags, flags1;
1363         char *s = "(probably) IRQ";
1364
1365         if (test_bit(RXBIT, &cosa->rxtx))
1366                 s = "RX DMA";
1367         if (test_bit(TXBIT, &cosa->rxtx))
1368                 s = "TX DMA";
1369
1370         printk(KERN_INFO "%s: %s timeout - restarting.\n", cosa->name, s); 
1371         spin_lock_irqsave(&cosa->lock, flags);
1372         cosa->rxtx = 0;
1373
1374         flags1 = claim_dma_lock();
1375         disable_dma(cosa->dma);
1376         clear_dma_ff(cosa->dma);
1377         release_dma_lock(flags1);
1378
1379         /* FIXME: Anything else? */
1380         udelay(100);
1381         cosa_putstatus(cosa, 0);
1382         udelay(100);
1383         (void) cosa_getdata8(cosa);
1384         udelay(100);
1385         cosa_putdata8(cosa, 0);
1386         udelay(100);
1387         put_driver_status_nolock(cosa);
1388         spin_unlock_irqrestore(&cosa->lock, flags);
1389 }
1390
1391 /*
1392  * Check if the whole buffer is DMA-able. It means it is below the 16M of
1393  * physical memory and doesn't span the 64k boundary. For now it seems
1394  * SKB's never do this, but we'll check this anyway.
1395  */
1396 static int cosa_dma_able(struct channel_data *chan, char *buf, int len)
1397 {
1398         static int count;
1399         unsigned long b = (unsigned long)buf;
1400         if (b+len >= MAX_DMA_ADDRESS)
1401                 return 0;
1402         if ((b^ (b+len)) & 0x10000) {
1403                 if (count++ < 5)
1404                         printk(KERN_INFO "%s: packet spanning a 64k boundary\n",
1405                                 chan->name);
1406                 return 0;
1407         }
1408         return 1;
1409 }
1410
1411 \f
1412 /* ---------- The SRP/COSA ROM monitor functions ---------- */
1413
1414 /*
1415  * Downloading SRP microcode: say "w" to SRP monitor, it answers by "w=",
1416  * drivers need to say 4-digit hex number meaning start address of the microcode
1417  * separated by a single space. Monitor replies by saying " =". Now driver
1418  * has to write 4-digit hex number meaning the last byte address ended
1419  * by a single space. Monitor has to reply with a space. Now the download
1420  * begins. After the download monitor replies with "\r\n." (CR LF dot).
1421  */
1422 static int download(struct cosa_data *cosa, const char __user *microcode, int length, int address)
1423 {
1424         int i;
1425
1426         if (put_wait_data(cosa, 'w') == -1) return -1;
1427         if ((i=get_wait_data(cosa)) != 'w') { printk("dnld: 0x%04x\n",i); return -2;}
1428         if (get_wait_data(cosa) != '=') return -3;
1429
1430         if (puthexnumber(cosa, address) < 0) return -4;
1431         if (put_wait_data(cosa, ' ') == -1) return -10;
1432         if (get_wait_data(cosa) != ' ') return -11;
1433         if (get_wait_data(cosa) != '=') return -12;
1434
1435         if (puthexnumber(cosa, address+length-1) < 0) return -13;
1436         if (put_wait_data(cosa, ' ') == -1) return -18;
1437         if (get_wait_data(cosa) != ' ') return -19;
1438
1439         while (length--) {
1440                 char c;
1441 #ifndef SRP_DOWNLOAD_AT_BOOT
1442                 if (get_user(c, microcode))
1443                         return -23; /* ??? */
1444 #else
1445                 c = *microcode;
1446 #endif
1447                 if (put_wait_data(cosa, c) == -1)
1448                         return -20;
1449                 microcode++;
1450         }
1451
1452         if (get_wait_data(cosa) != '\r') return -21;
1453         if (get_wait_data(cosa) != '\n') return -22;
1454         if (get_wait_data(cosa) != '.') return -23;
1455 #if 0
1456         printk(KERN_DEBUG "cosa%d: download completed.\n", cosa->num);
1457 #endif
1458         return 0;
1459 }
1460
1461
1462 /*
1463  * Starting microcode is done via the "g" command of the SRP monitor.
1464  * The chat should be the following: "g" "g=" "<addr><CR>"
1465  * "<CR><CR><LF><CR><LF>".
1466  */
1467 static int startmicrocode(struct cosa_data *cosa, int address)
1468 {
1469         if (put_wait_data(cosa, 'g') == -1) return -1;
1470         if (get_wait_data(cosa) != 'g') return -2;
1471         if (get_wait_data(cosa) != '=') return -3;
1472
1473         if (puthexnumber(cosa, address) < 0) return -4;
1474         if (put_wait_data(cosa, '\r') == -1) return -5;
1475         
1476         if (get_wait_data(cosa) != '\r') return -6;
1477         if (get_wait_data(cosa) != '\r') return -7;
1478         if (get_wait_data(cosa) != '\n') return -8;
1479         if (get_wait_data(cosa) != '\r') return -9;
1480         if (get_wait_data(cosa) != '\n') return -10;
1481 #if 0
1482         printk(KERN_DEBUG "cosa%d: microcode started\n", cosa->num);
1483 #endif
1484         return 0;
1485 }
1486
1487 /*
1488  * Reading memory is done via the "r" command of the SRP monitor.
1489  * The chat is the following "r" "r=" "<addr> " " =" "<last_byte> " " "
1490  * Then driver can read the data and the conversation is finished
1491  * by SRP monitor sending "<CR><LF>." (dot at the end).
1492  *
1493  * This routine is not needed during the normal operation and serves
1494  * for debugging purposes only.
1495  */
1496 static int readmem(struct cosa_data *cosa, char __user *microcode, int length, int address)
1497 {
1498         if (put_wait_data(cosa, 'r') == -1) return -1;
1499         if ((get_wait_data(cosa)) != 'r') return -2;
1500         if ((get_wait_data(cosa)) != '=') return -3;
1501
1502         if (puthexnumber(cosa, address) < 0) return -4;
1503         if (put_wait_data(cosa, ' ') == -1) return -5;
1504         if (get_wait_data(cosa) != ' ') return -6;
1505         if (get_wait_data(cosa) != '=') return -7;
1506
1507         if (puthexnumber(cosa, address+length-1) < 0) return -8;
1508         if (put_wait_data(cosa, ' ') == -1) return -9;
1509         if (get_wait_data(cosa) != ' ') return -10;
1510
1511         while (length--) {
1512                 char c;
1513                 int i;
1514                 if ((i=get_wait_data(cosa)) == -1) {
1515                         printk (KERN_INFO "cosa: 0x%04x bytes remaining\n",
1516                                 length);
1517                         return -11;
1518                 }
1519                 c=i;
1520 #if 1
1521                 if (put_user(c, microcode))
1522                         return -23; /* ??? */
1523 #else
1524                 *microcode = c;
1525 #endif
1526                 microcode++;
1527         }
1528
1529         if (get_wait_data(cosa) != '\r') return -21;
1530         if (get_wait_data(cosa) != '\n') return -22;
1531         if (get_wait_data(cosa) != '.') return -23;
1532 #if 0
1533         printk(KERN_DEBUG "cosa%d: readmem completed.\n", cosa->num);
1534 #endif
1535         return 0;
1536 }
1537
1538 /*
1539  * This function resets the device and reads the initial prompt
1540  * of the device's ROM monitor.
1541  */
1542 static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
1543 {
1544         int i=0, id=0, prev=0, curr=0;
1545
1546         /* Reset the card ... */
1547         cosa_putstatus(cosa, 0);
1548         cosa_getdata8(cosa);
1549         cosa_putstatus(cosa, SR_RST);
1550 #ifdef MODULE
1551         msleep(500);
1552 #else
1553         udelay(5*100000);
1554 #endif
1555         /* Disable all IRQs from the card */
1556         cosa_putstatus(cosa, 0);
1557
1558         /*
1559          * Try to read the ID string. The card then prints out the
1560          * identification string ended by the "\n\x2e".
1561          *
1562          * The following loop is indexed through i (instead of id)
1563          * to avoid looping forever when for any reason
1564          * the port returns '\r', '\n' or '\x2e' permanently.
1565          */
1566         for (i=0; i<COSA_MAX_ID_STRING-1; i++, prev=curr) {
1567                 if ((curr = get_wait_data(cosa)) == -1) {
1568                         return -1;
1569                 }
1570                 curr &= 0xff;
1571                 if (curr != '\r' && curr != '\n' && curr != 0x2e)
1572                         idstring[id++] = curr;
1573                 if (curr == 0x2e && prev == '\n')
1574                         break;
1575         }
1576         /* Perhaps we should fail when i==COSA_MAX_ID_STRING-1 ? */
1577         idstring[id] = '\0';
1578         return id;
1579 }
1580
1581 \f
1582 /* ---------- Auxiliary routines for COSA/SRP monitor ---------- */
1583
1584 /*
1585  * This routine gets the data byte from the card waiting for the SR_RX_RDY
1586  * bit to be set in a loop. It should be used in the exceptional cases
1587  * only (for example when resetting the card or downloading the firmware.
1588  */
1589 static int get_wait_data(struct cosa_data *cosa)
1590 {
1591         int retries = 1000;
1592
1593         while (--retries) {
1594                 /* read data and return them */
1595                 if (cosa_getstatus(cosa) & SR_RX_RDY) {
1596                         short r;
1597                         r = cosa_getdata8(cosa);
1598 #if 0
1599                         printk(KERN_INFO "cosa: get_wait_data returning after %d retries\n", 999-retries);
1600 #endif
1601                         return r;
1602                 }
1603                 /* sleep if not ready to read */
1604                 schedule_timeout_interruptible(1);
1605         }
1606         printk(KERN_INFO "cosa: timeout in get_wait_data (status 0x%x)\n",
1607                 cosa_getstatus(cosa));
1608         return -1;
1609 }
1610
1611 /*
1612  * This routine puts the data byte to the card waiting for the SR_TX_RDY
1613  * bit to be set in a loop. It should be used in the exceptional cases
1614  * only (for example when resetting the card or downloading the firmware).
1615  */
1616 static int put_wait_data(struct cosa_data *cosa, int data)
1617 {
1618         int retries = 1000;
1619         while (--retries) {
1620                 /* read data and return them */
1621                 if (cosa_getstatus(cosa) & SR_TX_RDY) {
1622                         cosa_putdata8(cosa, data);
1623 #if 0
1624                         printk(KERN_INFO "Putdata: %d retries\n", 999-retries);
1625 #endif
1626                         return 0;
1627                 }
1628 #if 0
1629                 /* sleep if not ready to read */
1630                 schedule_timeout_interruptible(1);
1631 #endif
1632         }
1633         printk(KERN_INFO "cosa%d: timeout in put_wait_data (status 0x%x)\n",
1634                 cosa->num, cosa_getstatus(cosa));
1635         return -1;
1636 }
1637         
1638 /* 
1639  * The following routine puts the hexadecimal number into the SRP monitor
1640  * and verifies the proper echo of the sent bytes. Returns 0 on success,
1641  * negative number on failure (-1,-3,-5,-7) means that put_wait_data() failed,
1642  * (-2,-4,-6,-8) means that reading echo failed.
1643  */
1644 static int puthexnumber(struct cosa_data *cosa, int number)
1645 {
1646         char temp[5];
1647         int i;
1648
1649         /* Well, I should probably replace this by something faster. */
1650         sprintf(temp, "%04X", number);
1651         for (i=0; i<4; i++) {
1652                 if (put_wait_data(cosa, temp[i]) == -1) {
1653                         printk(KERN_NOTICE "cosa%d: puthexnumber failed to write byte %d\n",
1654                                 cosa->num, i);
1655                         return -1-2*i;
1656                 }
1657                 if (get_wait_data(cosa) != temp[i]) {
1658                         printk(KERN_NOTICE "cosa%d: puthexhumber failed to read echo of byte %d\n",
1659                                 cosa->num, i);
1660                         return -2-2*i;
1661                 }
1662         }
1663         return 0;
1664 }
1665
1666 \f
1667 /* ---------- Interrupt routines ---------- */
1668
1669 /*
1670  * There are three types of interrupt:
1671  * At the beginning of transmit - this handled is in tx_interrupt(),
1672  * at the beginning of receive - it is in rx_interrupt() and
1673  * at the end of transmit/receive - it is the eot_interrupt() function.
1674  * These functions are multiplexed by cosa_interrupt() according to the
1675  * COSA status byte. I have moved the rx/tx/eot interrupt handling into
1676  * separate functions to make it more readable. These functions are inline,
1677  * so there should be no overhead of function call.
1678  * 
1679  * In the COSA bus-master mode, we need to tell the card the address of a
1680  * buffer. Unfortunately, COSA may be too slow for us, so we must busy-wait.
1681  * It's time to use the bottom half :-(
1682  */
1683
1684 /*
1685  * Transmit interrupt routine - called when COSA is willing to obtain
1686  * data from the OS. The most tricky part of the routine is selection
1687  * of channel we (OS) want to send packet for. For SRP we should probably
1688  * use the round-robin approach. The newer COSA firmwares have a simple
1689  * flow-control - in the status word has bits 2 and 3 set to 1 means that the
1690  * channel 0 or 1 doesn't want to receive data.
1691  *
1692  * It seems there is a bug in COSA firmware (need to trace it further):
1693  * When the driver status says that the kernel has no more data for transmit
1694  * (e.g. at the end of TX DMA) and then the kernel changes its mind
1695  * (e.g. new packet is queued to hard_start_xmit()), the card issues
1696  * the TX interrupt but does not mark the channel as ready-to-transmit.
1697  * The fix seems to be to push the packet to COSA despite its request.
1698  * We first try to obey the card's opinion, and then fall back to forced TX.
1699  */
1700 static inline void tx_interrupt(struct cosa_data *cosa, int status)
1701 {
1702         unsigned long flags, flags1;
1703 #ifdef DEBUG_IRQS
1704         printk(KERN_INFO "cosa%d: SR_DOWN_REQUEST status=0x%04x\n",
1705                 cosa->num, status);
1706 #endif
1707         spin_lock_irqsave(&cosa->lock, flags);
1708         set_bit(TXBIT, &cosa->rxtx);
1709         if (!test_bit(IRQBIT, &cosa->rxtx)) {
1710                 /* flow control, see the comment above */
1711                 int i=0;
1712                 if (!cosa->txbitmap) {
1713                         printk(KERN_WARNING "%s: No channel wants data "
1714                                 "in TX IRQ. Expect DMA timeout.",
1715                                 cosa->name);
1716                         put_driver_status_nolock(cosa);
1717                         clear_bit(TXBIT, &cosa->rxtx);
1718                         spin_unlock_irqrestore(&cosa->lock, flags);
1719                         return;
1720                 }
1721                 while(1) {
1722                         cosa->txchan++;
1723                         i++;
1724                         if (cosa->txchan >= cosa->nchannels)
1725                                 cosa->txchan = 0;
1726                         if (!(cosa->txbitmap & (1<<cosa->txchan)))
1727                                 continue;
1728                         if (~status & (1 << (cosa->txchan+DRIVER_TXMAP_SHIFT)))
1729                                 break;
1730                         /* in second pass, accept first ready-to-TX channel */
1731                         if (i > cosa->nchannels) {
1732                                 /* Can be safely ignored */
1733 #ifdef DEBUG_IRQS
1734                                 printk(KERN_DEBUG "%s: Forcing TX "
1735                                         "to not-ready channel %d\n",
1736                                         cosa->name, cosa->txchan);
1737 #endif
1738                                 break;
1739                         }
1740                 }
1741
1742                 cosa->txsize = cosa->chan[cosa->txchan].txsize;
1743                 if (cosa_dma_able(cosa->chan+cosa->txchan,
1744                         cosa->chan[cosa->txchan].txbuf, cosa->txsize)) {
1745                         cosa->txbuf = cosa->chan[cosa->txchan].txbuf;
1746                 } else {
1747                         memcpy(cosa->bouncebuf, cosa->chan[cosa->txchan].txbuf,
1748                                 cosa->txsize);
1749                         cosa->txbuf = cosa->bouncebuf;
1750                 }
1751         }
1752
1753         if (is_8bit(cosa)) {
1754                 if (!test_bit(IRQBIT, &cosa->rxtx)) {
1755                         cosa_putstatus(cosa, SR_TX_INT_ENA);
1756                         cosa_putdata8(cosa, ((cosa->txchan << 5) & 0xe0)|
1757                                 ((cosa->txsize >> 8) & 0x1f));
1758 #ifdef DEBUG_IO
1759                         debug_status_out(cosa, SR_TX_INT_ENA);
1760                         debug_data_out(cosa, ((cosa->txchan << 5) & 0xe0)|
1761                                 ((cosa->txsize >> 8) & 0x1f));
1762                         debug_data_in(cosa, cosa_getdata8(cosa));
1763 #else
1764                         cosa_getdata8(cosa);
1765 #endif
1766                         set_bit(IRQBIT, &cosa->rxtx);
1767                         spin_unlock_irqrestore(&cosa->lock, flags);
1768                         return;
1769                 } else {
1770                         clear_bit(IRQBIT, &cosa->rxtx);
1771                         cosa_putstatus(cosa, 0);
1772                         cosa_putdata8(cosa, cosa->txsize&0xff);
1773 #ifdef DEBUG_IO
1774                         debug_status_out(cosa, 0);
1775                         debug_data_out(cosa, cosa->txsize&0xff);
1776 #endif
1777                 }
1778         } else {
1779                 cosa_putstatus(cosa, SR_TX_INT_ENA);
1780                 cosa_putdata16(cosa, ((cosa->txchan<<13) & 0xe000)
1781                         | (cosa->txsize & 0x1fff));
1782 #ifdef DEBUG_IO
1783                 debug_status_out(cosa, SR_TX_INT_ENA);
1784                 debug_data_out(cosa, ((cosa->txchan<<13) & 0xe000)
1785                         | (cosa->txsize & 0x1fff));
1786                 debug_data_in(cosa, cosa_getdata8(cosa));
1787                 debug_status_out(cosa, 0);
1788 #else
1789                 cosa_getdata8(cosa);
1790 #endif
1791                 cosa_putstatus(cosa, 0);
1792         }
1793
1794         if (cosa->busmaster) {
1795                 unsigned long addr = virt_to_bus(cosa->txbuf);
1796                 int count=0;
1797                 printk(KERN_INFO "busmaster IRQ\n");
1798                 while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
1799                         count++;
1800                         udelay(10);
1801                         if (count > 1000) break;
1802                 }
1803                 printk(KERN_INFO "status %x\n", cosa_getstatus(cosa));
1804                 printk(KERN_INFO "ready after %d loops\n", count);
1805                 cosa_putdata16(cosa, (addr >> 16)&0xffff);
1806
1807                 count = 0;
1808                 while (!(cosa_getstatus(cosa)&SR_TX_RDY)) {
1809                         count++;
1810                         if (count > 1000) break;
1811                         udelay(10);
1812                 }
1813                 printk(KERN_INFO "ready after %d loops\n", count);
1814                 cosa_putdata16(cosa, addr &0xffff);
1815                 flags1 = claim_dma_lock();
1816                 set_dma_mode(cosa->dma, DMA_MODE_CASCADE);
1817                 enable_dma(cosa->dma);
1818                 release_dma_lock(flags1);
1819         } else {
1820                 /* start the DMA */
1821                 flags1 = claim_dma_lock();
1822                 disable_dma(cosa->dma);
1823                 clear_dma_ff(cosa->dma);
1824                 set_dma_mode(cosa->dma, DMA_MODE_WRITE);
1825                 set_dma_addr(cosa->dma, virt_to_bus(cosa->txbuf));
1826                 set_dma_count(cosa->dma, cosa->txsize);
1827                 enable_dma(cosa->dma);
1828                 release_dma_lock(flags1);
1829         }
1830         cosa_putstatus(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
1831 #ifdef DEBUG_IO
1832         debug_status_out(cosa, SR_TX_DMA_ENA|SR_USR_INT_ENA);
1833 #endif
1834         spin_unlock_irqrestore(&cosa->lock, flags);
1835 }
1836
1837 static inline void rx_interrupt(struct cosa_data *cosa, int status)
1838 {
1839         unsigned long flags;
1840 #ifdef DEBUG_IRQS
1841         printk(KERN_INFO "cosa%d: SR_UP_REQUEST\n", cosa->num);
1842 #endif
1843
1844         spin_lock_irqsave(&cosa->lock, flags);
1845         set_bit(RXBIT, &cosa->rxtx);
1846
1847         if (is_8bit(cosa)) {
1848                 if (!test_bit(IRQBIT, &cosa->rxtx)) {
1849                         set_bit(IRQBIT, &cosa->rxtx);
1850                         put_driver_status_nolock(cosa);
1851                         cosa->rxsize = cosa_getdata8(cosa) <<8;
1852 #ifdef DEBUG_IO
1853                         debug_data_in(cosa, cosa->rxsize >> 8);
1854 #endif
1855                         spin_unlock_irqrestore(&cosa->lock, flags);
1856                         return;
1857                 } else {
1858                         clear_bit(IRQBIT, &cosa->rxtx);
1859                         cosa->rxsize |= cosa_getdata8(cosa) & 0xff;
1860 #ifdef DEBUG_IO
1861                         debug_data_in(cosa, cosa->rxsize & 0xff);
1862 #endif
1863 #if 0
1864                         printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
1865                                 cosa->num, cosa->rxsize);
1866 #endif
1867                 }
1868         } else {
1869                 cosa->rxsize = cosa_getdata16(cosa);
1870 #ifdef DEBUG_IO
1871                 debug_data_in(cosa, cosa->rxsize);
1872 #endif
1873 #if 0
1874                 printk(KERN_INFO "cosa%d: receive rxsize = (0x%04x).\n",
1875                         cosa->num, cosa->rxsize);
1876 #endif
1877         }
1878         if (((cosa->rxsize & 0xe000) >> 13) >= cosa->nchannels) {
1879                 printk(KERN_WARNING "%s: rx for unknown channel (0x%04x)\n",
1880                         cosa->name, cosa->rxsize);
1881                 spin_unlock_irqrestore(&cosa->lock, flags);
1882                 goto reject;
1883         }
1884         cosa->rxchan = cosa->chan + ((cosa->rxsize & 0xe000) >> 13);
1885         cosa->rxsize &= 0x1fff;
1886         spin_unlock_irqrestore(&cosa->lock, flags);
1887
1888         cosa->rxbuf = NULL;
1889         if (cosa->rxchan->setup_rx)
1890                 cosa->rxbuf = cosa->rxchan->setup_rx(cosa->rxchan, cosa->rxsize);
1891
1892         if (!cosa->rxbuf) {
1893 reject:         /* Reject the packet */
1894                 printk(KERN_INFO "cosa%d: rejecting packet on channel %d\n",
1895                         cosa->num, cosa->rxchan->num);
1896                 cosa->rxbuf = cosa->bouncebuf;
1897         }
1898
1899         /* start the DMA */
1900         flags = claim_dma_lock();
1901         disable_dma(cosa->dma);
1902         clear_dma_ff(cosa->dma);
1903         set_dma_mode(cosa->dma, DMA_MODE_READ);
1904         if (cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize & 0x1fff)) {
1905                 set_dma_addr(cosa->dma, virt_to_bus(cosa->rxbuf));
1906         } else {
1907                 set_dma_addr(cosa->dma, virt_to_bus(cosa->bouncebuf));
1908         }
1909         set_dma_count(cosa->dma, (cosa->rxsize&0x1fff));
1910         enable_dma(cosa->dma);
1911         release_dma_lock(flags);
1912         spin_lock_irqsave(&cosa->lock, flags);
1913         cosa_putstatus(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
1914         if (!is_8bit(cosa) && (status & SR_TX_RDY))
1915                 cosa_putdata8(cosa, DRIVER_RX_READY);
1916 #ifdef DEBUG_IO
1917         debug_status_out(cosa, SR_RX_DMA_ENA|SR_USR_INT_ENA);
1918         if (!is_8bit(cosa) && (status & SR_TX_RDY))
1919                 debug_data_cmd(cosa, DRIVER_RX_READY);
1920 #endif
1921         spin_unlock_irqrestore(&cosa->lock, flags);
1922 }
1923
1924 static inline void eot_interrupt(struct cosa_data *cosa, int status)
1925 {
1926         unsigned long flags, flags1;
1927         spin_lock_irqsave(&cosa->lock, flags);
1928         flags1 = claim_dma_lock();
1929         disable_dma(cosa->dma);
1930         clear_dma_ff(cosa->dma);
1931         release_dma_lock(flags1);
1932         if (test_bit(TXBIT, &cosa->rxtx)) {
1933                 struct channel_data *chan = cosa->chan+cosa->txchan;
1934                 if (chan->tx_done)
1935                         if (chan->tx_done(chan, cosa->txsize))
1936                                 clear_bit(chan->num, &cosa->txbitmap);
1937         } else if (test_bit(RXBIT, &cosa->rxtx)) {
1938 #ifdef DEBUG_DATA
1939         {
1940                 int i;
1941                 printk(KERN_INFO "cosa%dc%d: done rx(0x%x)", cosa->num, 
1942                         cosa->rxchan->num, cosa->rxsize);
1943                 for (i=0; i<cosa->rxsize; i++)
1944                         printk (" %02x", cosa->rxbuf[i]&0xff);
1945                 printk("\n");
1946         }
1947 #endif
1948                 /* Packet for unknown channel? */
1949                 if (cosa->rxbuf == cosa->bouncebuf)
1950                         goto out;
1951                 if (!cosa_dma_able(cosa->rxchan, cosa->rxbuf, cosa->rxsize))
1952                         memcpy(cosa->rxbuf, cosa->bouncebuf, cosa->rxsize);
1953                 if (cosa->rxchan->rx_done)
1954                         if (cosa->rxchan->rx_done(cosa->rxchan))
1955                                 clear_bit(cosa->rxchan->num, &cosa->rxbitmap);
1956         } else {
1957                 printk(KERN_NOTICE "cosa%d: unexpected EOT interrupt\n",
1958                         cosa->num);
1959         }
1960         /*
1961          * Clear the RXBIT, TXBIT and IRQBIT (the latest should be
1962          * cleared anyway). We should do it as soon as possible
1963          * so that we can tell the COSA we are done and to give it a time
1964          * for recovery.
1965          */
1966 out:
1967         cosa->rxtx = 0;
1968         put_driver_status_nolock(cosa);
1969         spin_unlock_irqrestore(&cosa->lock, flags);
1970 }
1971
1972 static irqreturn_t cosa_interrupt(int irq, void *cosa_)
1973 {
1974         unsigned status;
1975         int count = 0;
1976         struct cosa_data *cosa = cosa_;
1977 again:
1978         status = cosa_getstatus(cosa);
1979 #ifdef DEBUG_IRQS
1980         printk(KERN_INFO "cosa%d: got IRQ, status 0x%02x\n", cosa->num,
1981                 status & 0xff);
1982 #endif
1983 #ifdef DEBUG_IO
1984         debug_status_in(cosa, status);
1985 #endif
1986         switch (status & SR_CMD_FROM_SRP_MASK) {
1987         case SR_DOWN_REQUEST:
1988                 tx_interrupt(cosa, status);
1989                 break;
1990         case SR_UP_REQUEST:
1991                 rx_interrupt(cosa, status);
1992                 break;
1993         case SR_END_OF_TRANSFER:
1994                 eot_interrupt(cosa, status);
1995                 break;
1996         default:
1997                 /* We may be too fast for SRP. Try to wait a bit more. */
1998                 if (count++ < 100) {
1999                         udelay(100);
2000                         goto again;
2001                 }
2002                 printk(KERN_INFO "cosa%d: unknown status 0x%02x in IRQ after %d retries\n",
2003                         cosa->num, status & 0xff, count);
2004         }
2005 #ifdef DEBUG_IRQS
2006         if (count)
2007                 printk(KERN_INFO "%s: %d-times got unknown status in IRQ\n",
2008                         cosa->name, count);
2009         else
2010                 printk(KERN_INFO "%s: returning from IRQ\n", cosa->name);
2011 #endif
2012         return IRQ_HANDLED;
2013 }
2014
2015 \f
2016 /* ---------- I/O debugging routines ---------- */
2017 /*
2018  * These routines can be used to monitor COSA/SRP I/O and to printk()
2019  * the data being transferred on the data and status I/O port in a
2020  * readable way.
2021  */
2022
2023 #ifdef DEBUG_IO
2024 static void debug_status_in(struct cosa_data *cosa, int status)
2025 {
2026         char *s;
2027         switch(status & SR_CMD_FROM_SRP_MASK) {
2028         case SR_UP_REQUEST:
2029                 s = "RX_REQ";
2030                 break;
2031         case SR_DOWN_REQUEST:
2032                 s = "TX_REQ";
2033                 break;
2034         case SR_END_OF_TRANSFER:
2035                 s = "ET_REQ";
2036                 break;
2037         default:
2038                 s = "NO_REQ";
2039                 break;
2040         }
2041         printk(KERN_INFO "%s: IO: status -> 0x%02x (%s%s%s%s)\n",
2042                 cosa->name,
2043                 status,
2044                 status & SR_USR_RQ ? "USR_RQ|":"",
2045                 status & SR_TX_RDY ? "TX_RDY|":"",
2046                 status & SR_RX_RDY ? "RX_RDY|":"",
2047                 s);
2048 }
2049
2050 static void debug_status_out(struct cosa_data *cosa, int status)
2051 {
2052         printk(KERN_INFO "%s: IO: status <- 0x%02x (%s%s%s%s%s%s)\n",
2053                 cosa->name,
2054                 status,
2055                 status & SR_RX_DMA_ENA  ? "RXDMA|":"!rxdma|",
2056                 status & SR_TX_DMA_ENA  ? "TXDMA|":"!txdma|",
2057                 status & SR_RST         ? "RESET|":"",
2058                 status & SR_USR_INT_ENA ? "USRINT|":"!usrint|",
2059                 status & SR_TX_INT_ENA  ? "TXINT|":"!txint|",
2060                 status & SR_RX_INT_ENA  ? "RXINT":"!rxint");
2061 }
2062
2063 static void debug_data_in(struct cosa_data *cosa, int data)
2064 {
2065         printk(KERN_INFO "%s: IO: data -> 0x%04x\n", cosa->name, data);
2066 }
2067
2068 static void debug_data_out(struct cosa_data *cosa, int data)
2069 {
2070         printk(KERN_INFO "%s: IO: data <- 0x%04x\n", cosa->name, data);
2071 }
2072
2073 static void debug_data_cmd(struct cosa_data *cosa, int data)
2074 {
2075         printk(KERN_INFO "%s: IO: data <- 0x%04x (%s|%s)\n",
2076                 cosa->name, data,
2077                 data & SR_RDY_RCV ? "RX_RDY" : "!rx_rdy",
2078                 data & SR_RDY_SND ? "TX_RDY" : "!tx_rdy");
2079 }
2080 #endif
2081
2082 /* EOF -- this file has not been truncated */