2 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
3 * Copyright (c) 2004-2005 Atheros Communications, Inc.
4 * Copyright (c) 2006 Devicescape Software, Inc.
5 * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
6 * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer,
15 * without modification.
16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
18 * redistribution must be conditioned upon including a substantially
19 * similar Disclaimer requirement for further binary redistribution.
20 * 3. Neither the names of the above-listed copyright holders nor the names
21 * of any contributors may be used to endorse or promote products derived
22 * from this software without specific prior written permission.
24 * Alternatively, this software may be distributed under the terms of the
25 * GNU General Public License ("GPL") version 2 as published by the Free
26 * Software Foundation.
29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
32 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
33 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
34 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
35 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
36 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
37 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
38 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
39 * THE POSSIBILITY OF SUCH DAMAGES.
43 #include <linux/module.h>
44 #include <linux/delay.h>
45 #include <linux/hardirq.h>
48 #include <linux/netdevice.h>
49 #include <linux/cache.h>
50 #include <linux/pci.h>
51 #include <linux/pci-aspm.h>
52 #include <linux/ethtool.h>
53 #include <linux/uaccess.h>
54 #include <linux/slab.h>
56 #include <net/ieee80211_radiotap.h>
58 #include <asm/unaligned.h>
65 static int modparam_nohwcrypt;
66 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
67 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
69 static int modparam_all_channels;
70 module_param_named(all_channels, modparam_all_channels, bool, S_IRUGO);
71 MODULE_PARM_DESC(all_channels, "Expose all channels the device can use.");
79 MODULE_AUTHOR("Jiri Slaby");
80 MODULE_AUTHOR("Nick Kossifidis");
81 MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
82 MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
83 MODULE_LICENSE("Dual BSD/GPL");
84 MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
88 static DEFINE_PCI_DEVICE_TABLE(ath5k_pci_id_table) = {
89 { PCI_VDEVICE(ATHEROS, 0x0207) }, /* 5210 early */
90 { PCI_VDEVICE(ATHEROS, 0x0007) }, /* 5210 */
91 { PCI_VDEVICE(ATHEROS, 0x0011) }, /* 5311 - this is on AHB bus !*/
92 { PCI_VDEVICE(ATHEROS, 0x0012) }, /* 5211 */
93 { PCI_VDEVICE(ATHEROS, 0x0013) }, /* 5212 */
94 { PCI_VDEVICE(3COM_2, 0x0013) }, /* 3com 5212 */
95 { PCI_VDEVICE(3COM, 0x0013) }, /* 3com 3CRDAG675 5212 */
96 { PCI_VDEVICE(ATHEROS, 0x1014) }, /* IBM minipci 5212 */
97 { PCI_VDEVICE(ATHEROS, 0x0014) }, /* 5212 combatible */
98 { PCI_VDEVICE(ATHEROS, 0x0015) }, /* 5212 combatible */
99 { PCI_VDEVICE(ATHEROS, 0x0016) }, /* 5212 combatible */
100 { PCI_VDEVICE(ATHEROS, 0x0017) }, /* 5212 combatible */
101 { PCI_VDEVICE(ATHEROS, 0x0018) }, /* 5212 combatible */
102 { PCI_VDEVICE(ATHEROS, 0x0019) }, /* 5212 combatible */
103 { PCI_VDEVICE(ATHEROS, 0x001a) }, /* 2413 Griffin-lite */
104 { PCI_VDEVICE(ATHEROS, 0x001b) }, /* 5413 Eagle */
105 { PCI_VDEVICE(ATHEROS, 0x001c) }, /* PCI-E cards */
106 { PCI_VDEVICE(ATHEROS, 0x001d) }, /* 2417 Nala */
109 MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
112 static const struct ath5k_srev_name srev_names[] = {
113 { "5210", AR5K_VERSION_MAC, AR5K_SREV_AR5210 },
114 { "5311", AR5K_VERSION_MAC, AR5K_SREV_AR5311 },
115 { "5311A", AR5K_VERSION_MAC, AR5K_SREV_AR5311A },
116 { "5311B", AR5K_VERSION_MAC, AR5K_SREV_AR5311B },
117 { "5211", AR5K_VERSION_MAC, AR5K_SREV_AR5211 },
118 { "5212", AR5K_VERSION_MAC, AR5K_SREV_AR5212 },
119 { "5213", AR5K_VERSION_MAC, AR5K_SREV_AR5213 },
120 { "5213A", AR5K_VERSION_MAC, AR5K_SREV_AR5213A },
121 { "2413", AR5K_VERSION_MAC, AR5K_SREV_AR2413 },
122 { "2414", AR5K_VERSION_MAC, AR5K_SREV_AR2414 },
123 { "5424", AR5K_VERSION_MAC, AR5K_SREV_AR5424 },
124 { "5413", AR5K_VERSION_MAC, AR5K_SREV_AR5413 },
125 { "5414", AR5K_VERSION_MAC, AR5K_SREV_AR5414 },
126 { "2415", AR5K_VERSION_MAC, AR5K_SREV_AR2415 },
127 { "5416", AR5K_VERSION_MAC, AR5K_SREV_AR5416 },
128 { "5418", AR5K_VERSION_MAC, AR5K_SREV_AR5418 },
129 { "2425", AR5K_VERSION_MAC, AR5K_SREV_AR2425 },
130 { "2417", AR5K_VERSION_MAC, AR5K_SREV_AR2417 },
131 { "xxxxx", AR5K_VERSION_MAC, AR5K_SREV_UNKNOWN },
132 { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
133 { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
134 { "5111A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111A },
135 { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
136 { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
137 { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
138 { "5112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112B },
139 { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
140 { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
141 { "2112B", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112B },
142 { "2413", AR5K_VERSION_RAD, AR5K_SREV_RAD_2413 },
143 { "5413", AR5K_VERSION_RAD, AR5K_SREV_RAD_5413 },
144 { "2316", AR5K_VERSION_RAD, AR5K_SREV_RAD_2316 },
145 { "2317", AR5K_VERSION_RAD, AR5K_SREV_RAD_2317 },
146 { "5424", AR5K_VERSION_RAD, AR5K_SREV_RAD_5424 },
147 { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
148 { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
151 static const struct ieee80211_rate ath5k_rates[] = {
153 .hw_value = ATH5K_RATE_CODE_1M, },
155 .hw_value = ATH5K_RATE_CODE_2M,
156 .hw_value_short = ATH5K_RATE_CODE_2M | AR5K_SET_SHORT_PREAMBLE,
157 .flags = IEEE80211_RATE_SHORT_PREAMBLE },
159 .hw_value = ATH5K_RATE_CODE_5_5M,
160 .hw_value_short = ATH5K_RATE_CODE_5_5M | AR5K_SET_SHORT_PREAMBLE,
161 .flags = IEEE80211_RATE_SHORT_PREAMBLE },
163 .hw_value = ATH5K_RATE_CODE_11M,
164 .hw_value_short = ATH5K_RATE_CODE_11M | AR5K_SET_SHORT_PREAMBLE,
165 .flags = IEEE80211_RATE_SHORT_PREAMBLE },
167 .hw_value = ATH5K_RATE_CODE_6M,
170 .hw_value = ATH5K_RATE_CODE_9M,
173 .hw_value = ATH5K_RATE_CODE_12M,
176 .hw_value = ATH5K_RATE_CODE_18M,
179 .hw_value = ATH5K_RATE_CODE_24M,
182 .hw_value = ATH5K_RATE_CODE_36M,
185 .hw_value = ATH5K_RATE_CODE_48M,
188 .hw_value = ATH5K_RATE_CODE_54M,
194 * Prototypes - PCI stack related functions
196 static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
197 const struct pci_device_id *id);
198 static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
199 #ifdef CONFIG_PM_SLEEP
200 static int ath5k_pci_suspend(struct device *dev);
201 static int ath5k_pci_resume(struct device *dev);
203 static SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
204 #define ATH5K_PM_OPS (&ath5k_pm_ops)
206 #define ATH5K_PM_OPS NULL
207 #endif /* CONFIG_PM_SLEEP */
209 static struct pci_driver ath5k_pci_driver = {
210 .name = KBUILD_MODNAME,
211 .id_table = ath5k_pci_id_table,
212 .probe = ath5k_pci_probe,
213 .remove = __devexit_p(ath5k_pci_remove),
214 .driver.pm = ATH5K_PM_OPS,
220 * Prototypes - MAC 802.11 stack related functions
222 static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
223 static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
224 struct ath5k_txq *txq);
225 static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
226 static int ath5k_start(struct ieee80211_hw *hw);
227 static void ath5k_stop(struct ieee80211_hw *hw);
228 static int ath5k_add_interface(struct ieee80211_hw *hw,
229 struct ieee80211_vif *vif);
230 static void ath5k_remove_interface(struct ieee80211_hw *hw,
231 struct ieee80211_vif *vif);
232 static int ath5k_config(struct ieee80211_hw *hw, u32 changed);
233 static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
234 struct netdev_hw_addr_list *mc_list);
235 static void ath5k_configure_filter(struct ieee80211_hw *hw,
236 unsigned int changed_flags,
237 unsigned int *new_flags,
239 static int ath5k_set_key(struct ieee80211_hw *hw,
240 enum set_key_cmd cmd,
241 struct ieee80211_vif *vif, struct ieee80211_sta *sta,
242 struct ieee80211_key_conf *key);
243 static int ath5k_get_stats(struct ieee80211_hw *hw,
244 struct ieee80211_low_level_stats *stats);
245 static int ath5k_get_survey(struct ieee80211_hw *hw,
246 int idx, struct survey_info *survey);
247 static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
248 static void ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf);
249 static void ath5k_reset_tsf(struct ieee80211_hw *hw);
250 static int ath5k_beacon_update(struct ieee80211_hw *hw,
251 struct ieee80211_vif *vif);
252 static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
253 struct ieee80211_vif *vif,
254 struct ieee80211_bss_conf *bss_conf,
256 static void ath5k_sw_scan_start(struct ieee80211_hw *hw);
257 static void ath5k_sw_scan_complete(struct ieee80211_hw *hw);
258 static void ath5k_set_coverage_class(struct ieee80211_hw *hw,
261 static const struct ieee80211_ops ath5k_hw_ops = {
263 .start = ath5k_start,
265 .add_interface = ath5k_add_interface,
266 .remove_interface = ath5k_remove_interface,
267 .config = ath5k_config,
268 .prepare_multicast = ath5k_prepare_multicast,
269 .configure_filter = ath5k_configure_filter,
270 .set_key = ath5k_set_key,
271 .get_stats = ath5k_get_stats,
272 .get_survey = ath5k_get_survey,
274 .get_tsf = ath5k_get_tsf,
275 .set_tsf = ath5k_set_tsf,
276 .reset_tsf = ath5k_reset_tsf,
277 .bss_info_changed = ath5k_bss_info_changed,
278 .sw_scan_start = ath5k_sw_scan_start,
279 .sw_scan_complete = ath5k_sw_scan_complete,
280 .set_coverage_class = ath5k_set_coverage_class,
284 * Prototypes - Internal functions
287 static int ath5k_attach(struct pci_dev *pdev,
288 struct ieee80211_hw *hw);
289 static void ath5k_detach(struct pci_dev *pdev,
290 struct ieee80211_hw *hw);
291 /* Channel/mode setup */
292 static inline short ath5k_ieee2mhz(short chan);
293 static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
294 struct ieee80211_channel *channels,
297 static int ath5k_setup_bands(struct ieee80211_hw *hw);
298 static int ath5k_chan_set(struct ath5k_softc *sc,
299 struct ieee80211_channel *chan);
300 static void ath5k_setcurmode(struct ath5k_softc *sc,
302 static void ath5k_mode_setup(struct ath5k_softc *sc);
304 /* Descriptor setup */
305 static int ath5k_desc_alloc(struct ath5k_softc *sc,
306 struct pci_dev *pdev);
307 static void ath5k_desc_free(struct ath5k_softc *sc,
308 struct pci_dev *pdev);
310 static int ath5k_rxbuf_setup(struct ath5k_softc *sc,
311 struct ath5k_buf *bf);
312 static int ath5k_txbuf_setup(struct ath5k_softc *sc,
313 struct ath5k_buf *bf,
314 struct ath5k_txq *txq, int padsize);
316 static inline void ath5k_txbuf_free_skb(struct ath5k_softc *sc,
317 struct ath5k_buf *bf)
322 pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
324 dev_kfree_skb_any(bf->skb);
327 bf->desc->ds_data = 0;
330 static inline void ath5k_rxbuf_free_skb(struct ath5k_softc *sc,
331 struct ath5k_buf *bf)
333 struct ath5k_hw *ah = sc->ah;
334 struct ath_common *common = ath5k_hw_common(ah);
339 pci_unmap_single(sc->pdev, bf->skbaddr, common->rx_bufsize,
341 dev_kfree_skb_any(bf->skb);
344 bf->desc->ds_data = 0;
349 static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
350 int qtype, int subtype);
351 static int ath5k_beaconq_setup(struct ath5k_hw *ah);
352 static int ath5k_beaconq_config(struct ath5k_softc *sc);
353 static void ath5k_txq_drainq(struct ath5k_softc *sc,
354 struct ath5k_txq *txq);
355 static void ath5k_txq_cleanup(struct ath5k_softc *sc);
356 static void ath5k_txq_release(struct ath5k_softc *sc);
358 static int ath5k_rx_start(struct ath5k_softc *sc);
359 static void ath5k_rx_stop(struct ath5k_softc *sc);
360 static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
362 struct ath5k_rx_status *rs);
363 static void ath5k_tasklet_rx(unsigned long data);
365 static void ath5k_tx_processq(struct ath5k_softc *sc,
366 struct ath5k_txq *txq);
367 static void ath5k_tasklet_tx(unsigned long data);
368 /* Beacon handling */
369 static int ath5k_beacon_setup(struct ath5k_softc *sc,
370 struct ath5k_buf *bf);
371 static void ath5k_beacon_send(struct ath5k_softc *sc);
372 static void ath5k_beacon_config(struct ath5k_softc *sc);
373 static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
374 static void ath5k_tasklet_beacon(unsigned long data);
375 static void ath5k_tasklet_ani(unsigned long data);
377 static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
379 u64 tsf = ath5k_hw_get_tsf64(ah);
381 if ((tsf & 0x7fff) < rstamp)
384 return (tsf & ~0x7fff) | rstamp;
387 /* Interrupt handling */
388 static int ath5k_init(struct ath5k_softc *sc);
389 static int ath5k_stop_locked(struct ath5k_softc *sc);
390 static int ath5k_stop_hw(struct ath5k_softc *sc);
391 static irqreturn_t ath5k_intr(int irq, void *dev_id);
392 static void ath5k_reset_work(struct work_struct *work);
394 static void ath5k_tasklet_calibrate(unsigned long data);
397 * Module init/exit functions
406 ret = pci_register_driver(&ath5k_pci_driver);
408 printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
418 pci_unregister_driver(&ath5k_pci_driver);
420 ath5k_debug_finish();
423 module_init(init_ath5k_pci);
424 module_exit(exit_ath5k_pci);
427 /********************\
428 * PCI Initialization *
429 \********************/
432 ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
434 const char *name = "xxxxx";
437 for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
438 if (srev_names[i].sr_type != type)
441 if ((val & 0xf0) == srev_names[i].sr_val)
442 name = srev_names[i].sr_name;
444 if ((val & 0xff) == srev_names[i].sr_val) {
445 name = srev_names[i].sr_name;
452 static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
454 struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
455 return ath5k_hw_reg_read(ah, reg_offset);
458 static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
460 struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
461 ath5k_hw_reg_write(ah, val, reg_offset);
464 static const struct ath_ops ath5k_common_ops = {
465 .read = ath5k_ioread32,
466 .write = ath5k_iowrite32,
470 ath5k_pci_probe(struct pci_dev *pdev,
471 const struct pci_device_id *id)
474 struct ath5k_softc *sc;
475 struct ath_common *common;
476 struct ieee80211_hw *hw;
481 * L0s needs to be disabled on all ath5k cards.
483 * For distributions shipping with CONFIG_PCIEASPM (this will be enabled
484 * by default in the future in 2.6.36) this will also mean both L1 and
485 * L0s will be disabled when a pre 1.1 PCIe device is detected. We do
486 * know L1 works correctly even for all ath5k pre 1.1 PCIe devices
487 * though but cannot currently undue the effect of a blacklist, for
488 * details you can read pcie_aspm_sanity_check() and see how it adjusts
489 * the device link capability.
491 * It may be possible in the future to implement some PCI API to allow
492 * drivers to override blacklists for pre 1.1 PCIe but for now it is
493 * best to accept that both L0s and L1 will be disabled completely for
494 * distributions shipping with CONFIG_PCIEASPM rather than having this
495 * issue present. Motivation for adding this new API will be to help
496 * with power consumption for some of these devices.
498 pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S);
500 ret = pci_enable_device(pdev);
502 dev_err(&pdev->dev, "can't enable device\n");
506 /* XXX 32-bit addressing only */
507 ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
509 dev_err(&pdev->dev, "32-bit DMA not available\n");
514 * Cache line size is used to size and align various
515 * structures used to communicate with the hardware.
517 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
520 * Linux 2.4.18 (at least) writes the cache line size
521 * register as a 16-bit wide register which is wrong.
522 * We must have this setup properly for rx buffer
523 * DMA to work so force a reasonable value here if it
526 csz = L1_CACHE_BYTES >> 2;
527 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
530 * The default setting of latency timer yields poor results,
531 * set it to the value used by other systems. It may be worth
532 * tweaking this setting more.
534 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
536 /* Enable bus mastering */
537 pci_set_master(pdev);
540 * Disable the RETRY_TIMEOUT register (0x41) to keep
541 * PCI Tx retries from interfering with C3 CPU state.
543 pci_write_config_byte(pdev, 0x41, 0);
545 ret = pci_request_region(pdev, 0, "ath5k");
547 dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
551 mem = pci_iomap(pdev, 0, 0);
553 dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
559 * Allocate hw (mac80211 main struct)
560 * and hw->priv (driver private data)
562 hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
564 dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
569 dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
571 /* Initialize driver private data */
572 SET_IEEE80211_DEV(hw, &pdev->dev);
573 hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
574 IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
575 IEEE80211_HW_SIGNAL_DBM;
577 hw->wiphy->interface_modes =
578 BIT(NL80211_IFTYPE_AP) |
579 BIT(NL80211_IFTYPE_STATION) |
580 BIT(NL80211_IFTYPE_ADHOC) |
581 BIT(NL80211_IFTYPE_MESH_POINT);
583 hw->extra_tx_headroom = 2;
584 hw->channel_change_time = 5000;
589 ath5k_debug_init_device(sc);
592 * Mark the device as detached to avoid processing
593 * interrupts until setup is complete.
595 __set_bit(ATH_STAT_INVALID, sc->status);
597 sc->iobase = mem; /* So we can unmap it on detach */
598 sc->opmode = NL80211_IFTYPE_STATION;
600 mutex_init(&sc->lock);
601 spin_lock_init(&sc->rxbuflock);
602 spin_lock_init(&sc->txbuflock);
603 spin_lock_init(&sc->block);
605 /* Set private data */
606 pci_set_drvdata(pdev, sc);
608 /* Setup interrupt handler */
609 ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
611 ATH5K_ERR(sc, "request_irq failed\n");
615 /*If we passed the test malloc a ath5k_hw struct*/
616 sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
619 ATH5K_ERR(sc, "out of memory\n");
624 sc->ah->ah_iobase = sc->iobase;
625 common = ath5k_hw_common(sc->ah);
626 common->ops = &ath5k_common_ops;
629 common->cachelsz = csz << 2; /* convert to bytes */
631 /* Initialize device */
632 ret = ath5k_hw_attach(sc);
637 /* set up multi-rate retry capabilities */
638 if (sc->ah->ah_version == AR5K_AR5212) {
640 hw->max_rate_tries = 11;
643 /* Finish private driver data initialization */
644 ret = ath5k_attach(pdev, hw);
648 ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
649 ath5k_chip_name(AR5K_VERSION_MAC, sc->ah->ah_mac_srev),
651 sc->ah->ah_phy_revision);
653 if (!sc->ah->ah_single_chip) {
654 /* Single chip radio (!RF5111) */
655 if (sc->ah->ah_radio_5ghz_revision &&
656 !sc->ah->ah_radio_2ghz_revision) {
657 /* No 5GHz support -> report 2GHz radio */
658 if (!test_bit(AR5K_MODE_11A,
659 sc->ah->ah_capabilities.cap_mode)) {
660 ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
661 ath5k_chip_name(AR5K_VERSION_RAD,
662 sc->ah->ah_radio_5ghz_revision),
663 sc->ah->ah_radio_5ghz_revision);
664 /* No 2GHz support (5110 and some
665 * 5Ghz only cards) -> report 5Ghz radio */
666 } else if (!test_bit(AR5K_MODE_11B,
667 sc->ah->ah_capabilities.cap_mode)) {
668 ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
669 ath5k_chip_name(AR5K_VERSION_RAD,
670 sc->ah->ah_radio_5ghz_revision),
671 sc->ah->ah_radio_5ghz_revision);
672 /* Multiband radio */
674 ATH5K_INFO(sc, "RF%s multiband radio found"
676 ath5k_chip_name(AR5K_VERSION_RAD,
677 sc->ah->ah_radio_5ghz_revision),
678 sc->ah->ah_radio_5ghz_revision);
681 /* Multi chip radio (RF5111 - RF2111) ->
682 * report both 2GHz/5GHz radios */
683 else if (sc->ah->ah_radio_5ghz_revision &&
684 sc->ah->ah_radio_2ghz_revision){
685 ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
686 ath5k_chip_name(AR5K_VERSION_RAD,
687 sc->ah->ah_radio_5ghz_revision),
688 sc->ah->ah_radio_5ghz_revision);
689 ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
690 ath5k_chip_name(AR5K_VERSION_RAD,
691 sc->ah->ah_radio_2ghz_revision),
692 sc->ah->ah_radio_2ghz_revision);
697 /* ready to process interrupts */
698 __clear_bit(ATH_STAT_INVALID, sc->status);
702 ath5k_hw_detach(sc->ah);
704 free_irq(pdev->irq, sc);
708 ieee80211_free_hw(hw);
710 pci_iounmap(pdev, mem);
712 pci_release_region(pdev, 0);
714 pci_disable_device(pdev);
719 static void __devexit
720 ath5k_pci_remove(struct pci_dev *pdev)
722 struct ath5k_softc *sc = pci_get_drvdata(pdev);
724 ath5k_debug_finish_device(sc);
725 ath5k_detach(pdev, sc->hw);
726 ath5k_hw_detach(sc->ah);
728 free_irq(pdev->irq, sc);
729 pci_iounmap(pdev, sc->iobase);
730 pci_release_region(pdev, 0);
731 pci_disable_device(pdev);
732 ieee80211_free_hw(sc->hw);
735 #ifdef CONFIG_PM_SLEEP
736 static int ath5k_pci_suspend(struct device *dev)
738 struct ath5k_softc *sc = pci_get_drvdata(to_pci_dev(dev));
744 static int ath5k_pci_resume(struct device *dev)
746 struct pci_dev *pdev = to_pci_dev(dev);
747 struct ath5k_softc *sc = pci_get_drvdata(pdev);
750 * Suspend/Resume resets the PCI configuration space, so we have to
751 * re-disable the RETRY_TIMEOUT register (0x41) to keep
752 * PCI Tx retries from interfering with C3 CPU state
754 pci_write_config_byte(pdev, 0x41, 0);
756 ath5k_led_enable(sc);
759 #endif /* CONFIG_PM_SLEEP */
762 /***********************\
763 * Driver Initialization *
764 \***********************/
766 static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request)
768 struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
769 struct ath5k_softc *sc = hw->priv;
770 struct ath_regulatory *regulatory = ath5k_hw_regulatory(sc->ah);
772 return ath_reg_notifier_apply(wiphy, request, regulatory);
776 ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
778 struct ath5k_softc *sc = hw->priv;
779 struct ath5k_hw *ah = sc->ah;
780 struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
781 u8 mac[ETH_ALEN] = {};
784 ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
787 * Check if the MAC has multi-rate retry support.
788 * We do this by trying to setup a fake extended
789 * descriptor. MAC's that don't have support will
790 * return false w/o doing anything. MAC's that do
791 * support it will return true w/o doing anything.
793 ret = ath5k_hw_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
798 __set_bit(ATH_STAT_MRRETRY, sc->status);
801 * Collect the channel list. The 802.11 layer
802 * is resposible for filtering this list based
803 * on settings like the phy mode and regulatory
804 * domain restrictions.
806 ret = ath5k_setup_bands(hw);
808 ATH5K_ERR(sc, "can't get channels\n");
812 /* NB: setup here so ath5k_rate_update is happy */
813 if (test_bit(AR5K_MODE_11A, ah->ah_modes))
814 ath5k_setcurmode(sc, AR5K_MODE_11A);
816 ath5k_setcurmode(sc, AR5K_MODE_11B);
819 * Allocate tx+rx descriptors and populate the lists.
821 ret = ath5k_desc_alloc(sc, pdev);
823 ATH5K_ERR(sc, "can't allocate descriptors\n");
828 * Allocate hardware transmit queues: one queue for
829 * beacon frames and one data queue for each QoS
830 * priority. Note that hw functions handle reseting
831 * these queues at the needed time.
833 ret = ath5k_beaconq_setup(ah);
835 ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
839 sc->cabq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_CAB, 0);
840 if (IS_ERR(sc->cabq)) {
841 ATH5K_ERR(sc, "can't setup cab queue\n");
842 ret = PTR_ERR(sc->cabq);
846 sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
847 if (IS_ERR(sc->txq)) {
848 ATH5K_ERR(sc, "can't setup xmit queue\n");
849 ret = PTR_ERR(sc->txq);
853 tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
854 tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
855 tasklet_init(&sc->calib, ath5k_tasklet_calibrate, (unsigned long)sc);
856 tasklet_init(&sc->beacontq, ath5k_tasklet_beacon, (unsigned long)sc);
857 tasklet_init(&sc->ani_tasklet, ath5k_tasklet_ani, (unsigned long)sc);
859 INIT_WORK(&sc->reset_work, ath5k_reset_work);
861 ret = ath5k_eeprom_read_mac(ah, mac);
863 ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
868 SET_IEEE80211_PERM_ADDR(hw, mac);
869 /* All MAC address bits matter for ACKs */
870 memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
871 ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
873 regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
874 ret = ath_regd_init(regulatory, hw->wiphy, ath5k_reg_notifier);
876 ATH5K_ERR(sc, "can't initialize regulatory system\n");
880 ret = ieee80211_register_hw(hw);
882 ATH5K_ERR(sc, "can't register ieee80211 hw\n");
886 if (!ath_is_world_regd(regulatory))
887 regulatory_hint(hw->wiphy, regulatory->alpha2);
891 ath5k_sysfs_register(sc);
895 ath5k_txq_release(sc);
897 ath5k_hw_release_tx_queue(ah, sc->bhalq);
899 ath5k_desc_free(sc, pdev);
905 ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
907 struct ath5k_softc *sc = hw->priv;
910 * NB: the order of these is important:
911 * o call the 802.11 layer before detaching ath5k_hw to
912 * insure callbacks into the driver to delete global
913 * key cache entries can be handled
914 * o reclaim the tx queue data structures after calling
915 * the 802.11 layer as we'll get called back to reclaim
916 * node state and potentially want to use them
917 * o to cleanup the tx queues the hal is called, so detach
919 * XXX: ??? detach ath5k_hw ???
920 * Other than that, it's straightforward...
922 ieee80211_unregister_hw(hw);
923 ath5k_desc_free(sc, pdev);
924 ath5k_txq_release(sc);
925 ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
926 ath5k_unregister_leds(sc);
928 ath5k_sysfs_unregister(sc);
930 * NB: can't reclaim these until after ieee80211_ifdetach
931 * returns because we'll get called back to reclaim node
932 * state and potentially want to use them.
939 /********************\
940 * Channel/mode setup *
941 \********************/
944 * Convert IEEE channel number to MHz frequency.
947 ath5k_ieee2mhz(short chan)
949 if (chan <= 14 || chan >= 27)
950 return ieee80211chan2mhz(chan);
952 return 2212 + chan * 20;
956 * Returns true for the channel numbers used without all_channels modparam.
958 static bool ath5k_is_standard_channel(short chan)
960 return ((chan <= 14) ||
962 ((chan & 3) == 0 && chan >= 36 && chan <= 64) ||
964 ((chan & 3) == 0 && chan >= 100 && chan <= 140) ||
966 ((chan & 3) == 1 && chan >= 149 && chan <= 165));
970 ath5k_copy_channels(struct ath5k_hw *ah,
971 struct ieee80211_channel *channels,
975 unsigned int i, count, size, chfreq, freq, ch;
977 if (!test_bit(mode, ah->ah_modes))
982 case AR5K_MODE_11A_TURBO:
983 /* 1..220, but 2GHz frequencies are filtered by check_channel */
985 chfreq = CHANNEL_5GHZ;
989 case AR5K_MODE_11G_TURBO:
991 chfreq = CHANNEL_2GHZ;
994 ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
998 for (i = 0, count = 0; i < size && max > 0; i++) {
1000 freq = ath5k_ieee2mhz(ch);
1002 /* Check if channel is supported by the chipset */
1003 if (!ath5k_channel_ok(ah, freq, chfreq))
1006 if (!modparam_all_channels && !ath5k_is_standard_channel(ch))
1009 /* Write channel info and increment counter */
1010 channels[count].center_freq = freq;
1011 channels[count].band = (chfreq == CHANNEL_2GHZ) ?
1012 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
1016 channels[count].hw_value = chfreq | CHANNEL_OFDM;
1018 case AR5K_MODE_11A_TURBO:
1019 case AR5K_MODE_11G_TURBO:
1020 channels[count].hw_value = chfreq |
1021 CHANNEL_OFDM | CHANNEL_TURBO;
1024 channels[count].hw_value = CHANNEL_B;
1035 ath5k_setup_rate_idx(struct ath5k_softc *sc, struct ieee80211_supported_band *b)
1039 for (i = 0; i < AR5K_MAX_RATES; i++)
1040 sc->rate_idx[b->band][i] = -1;
1042 for (i = 0; i < b->n_bitrates; i++) {
1043 sc->rate_idx[b->band][b->bitrates[i].hw_value] = i;
1044 if (b->bitrates[i].hw_value_short)
1045 sc->rate_idx[b->band][b->bitrates[i].hw_value_short] = i;
1050 ath5k_setup_bands(struct ieee80211_hw *hw)
1052 struct ath5k_softc *sc = hw->priv;
1053 struct ath5k_hw *ah = sc->ah;
1054 struct ieee80211_supported_band *sband;
1055 int max_c, count_c = 0;
1058 BUILD_BUG_ON(ARRAY_SIZE(sc->sbands) < IEEE80211_NUM_BANDS);
1059 max_c = ARRAY_SIZE(sc->channels);
1062 sband = &sc->sbands[IEEE80211_BAND_2GHZ];
1063 sband->band = IEEE80211_BAND_2GHZ;
1064 sband->bitrates = &sc->rates[IEEE80211_BAND_2GHZ][0];
1066 if (test_bit(AR5K_MODE_11G, sc->ah->ah_capabilities.cap_mode)) {
1068 memcpy(sband->bitrates, &ath5k_rates[0],
1069 sizeof(struct ieee80211_rate) * 12);
1070 sband->n_bitrates = 12;
1072 sband->channels = sc->channels;
1073 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
1074 AR5K_MODE_11G, max_c);
1076 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
1077 count_c = sband->n_channels;
1079 } else if (test_bit(AR5K_MODE_11B, sc->ah->ah_capabilities.cap_mode)) {
1081 memcpy(sband->bitrates, &ath5k_rates[0],
1082 sizeof(struct ieee80211_rate) * 4);
1083 sband->n_bitrates = 4;
1085 /* 5211 only supports B rates and uses 4bit rate codes
1086 * (e.g normally we have 0x1B for 1M, but on 5211 we have 0x0B)
1089 if (ah->ah_version == AR5K_AR5211) {
1090 for (i = 0; i < 4; i++) {
1091 sband->bitrates[i].hw_value =
1092 sband->bitrates[i].hw_value & 0xF;
1093 sband->bitrates[i].hw_value_short =
1094 sband->bitrates[i].hw_value_short & 0xF;
1098 sband->channels = sc->channels;
1099 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
1100 AR5K_MODE_11B, max_c);
1102 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = sband;
1103 count_c = sband->n_channels;
1106 ath5k_setup_rate_idx(sc, sband);
1108 /* 5GHz band, A mode */
1109 if (test_bit(AR5K_MODE_11A, sc->ah->ah_capabilities.cap_mode)) {
1110 sband = &sc->sbands[IEEE80211_BAND_5GHZ];
1111 sband->band = IEEE80211_BAND_5GHZ;
1112 sband->bitrates = &sc->rates[IEEE80211_BAND_5GHZ][0];
1114 memcpy(sband->bitrates, &ath5k_rates[4],
1115 sizeof(struct ieee80211_rate) * 8);
1116 sband->n_bitrates = 8;
1118 sband->channels = &sc->channels[count_c];
1119 sband->n_channels = ath5k_copy_channels(ah, sband->channels,
1120 AR5K_MODE_11A, max_c);
1122 hw->wiphy->bands[IEEE80211_BAND_5GHZ] = sband;
1124 ath5k_setup_rate_idx(sc, sband);
1126 ath5k_debug_dump_bands(sc);
1132 * Set/change channels. We always reset the chip.
1133 * To accomplish this we must first cleanup any pending DMA,
1134 * then restart stuff after a la ath5k_init.
1136 * Called with sc->lock.
1139 ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
1141 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
1142 "channel set, resetting (%u -> %u MHz)\n",
1143 sc->curchan->center_freq, chan->center_freq);
1146 * To switch channels clear any pending DMA operations;
1147 * wait long enough for the RX fifo to drain, reset the
1148 * hardware at the new frequency, and then re-enable
1149 * the relevant bits of the h/w.
1151 return ath5k_reset(sc, chan);
1155 ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
1159 if (mode == AR5K_MODE_11A) {
1160 sc->curband = &sc->sbands[IEEE80211_BAND_5GHZ];
1162 sc->curband = &sc->sbands[IEEE80211_BAND_2GHZ];
1167 ath5k_mode_setup(struct ath5k_softc *sc)
1169 struct ath5k_hw *ah = sc->ah;
1172 /* configure rx filter */
1173 rfilt = sc->filter_flags;
1174 ath5k_hw_set_rx_filter(ah, rfilt);
1176 if (ath5k_hw_hasbssidmask(ah))
1177 ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
1179 /* configure operational mode */
1180 ath5k_hw_set_opmode(ah, sc->opmode);
1182 ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "mode setup opmode %d\n", sc->opmode);
1183 ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
1187 ath5k_hw_to_driver_rix(struct ath5k_softc *sc, int hw_rix)
1191 /* return base rate on errors */
1192 if (WARN(hw_rix < 0 || hw_rix >= AR5K_MAX_RATES,
1193 "hw_rix out of bounds: %x\n", hw_rix))
1196 rix = sc->rate_idx[sc->curband->band][hw_rix];
1197 if (WARN(rix < 0, "invalid hw_rix: %x\n", hw_rix))
1208 struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
1210 struct ath_common *common = ath5k_hw_common(sc->ah);
1211 struct sk_buff *skb;
1214 * Allocate buffer with headroom_needed space for the
1215 * fake physical layer header at the start.
1217 skb = ath_rxbuf_alloc(common,
1222 ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
1223 common->rx_bufsize);
1227 *skb_addr = pci_map_single(sc->pdev,
1228 skb->data, common->rx_bufsize,
1229 PCI_DMA_FROMDEVICE);
1230 if (unlikely(pci_dma_mapping_error(sc->pdev, *skb_addr))) {
1231 ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
1239 ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1241 struct ath5k_hw *ah = sc->ah;
1242 struct sk_buff *skb = bf->skb;
1243 struct ath5k_desc *ds;
1247 skb = ath5k_rx_skb_alloc(sc, &bf->skbaddr);
1254 * Setup descriptors. For receive we always terminate
1255 * the descriptor list with a self-linked entry so we'll
1256 * not get overrun under high load (as can happen with a
1257 * 5212 when ANI processing enables PHY error frames).
1259 * To ensure the last descriptor is self-linked we create
1260 * each descriptor as self-linked and add it to the end. As
1261 * each additional descriptor is added the previous self-linked
1262 * entry is "fixed" naturally. This should be safe even
1263 * if DMA is happening. When processing RX interrupts we
1264 * never remove/process the last, self-linked, entry on the
1265 * descriptor list. This ensures the hardware always has
1266 * someplace to write a new frame.
1269 ds->ds_link = bf->daddr; /* link to self */
1270 ds->ds_data = bf->skbaddr;
1271 ret = ath5k_hw_setup_rx_desc(ah, ds, ah->common.rx_bufsize, 0);
1273 ATH5K_ERR(sc, "%s: could not setup RX desc\n", __func__);
1277 if (sc->rxlink != NULL)
1278 *sc->rxlink = bf->daddr;
1279 sc->rxlink = &ds->ds_link;
1283 static enum ath5k_pkt_type get_hw_packet_type(struct sk_buff *skb)
1285 struct ieee80211_hdr *hdr;
1286 enum ath5k_pkt_type htype;
1289 hdr = (struct ieee80211_hdr *)skb->data;
1290 fc = hdr->frame_control;
1292 if (ieee80211_is_beacon(fc))
1293 htype = AR5K_PKT_TYPE_BEACON;
1294 else if (ieee80211_is_probe_resp(fc))
1295 htype = AR5K_PKT_TYPE_PROBE_RESP;
1296 else if (ieee80211_is_atim(fc))
1297 htype = AR5K_PKT_TYPE_ATIM;
1298 else if (ieee80211_is_pspoll(fc))
1299 htype = AR5K_PKT_TYPE_PSPOLL;
1301 htype = AR5K_PKT_TYPE_NORMAL;
1307 ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
1308 struct ath5k_txq *txq, int padsize)
1310 struct ath5k_hw *ah = sc->ah;
1311 struct ath5k_desc *ds = bf->desc;
1312 struct sk_buff *skb = bf->skb;
1313 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1314 unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
1315 struct ieee80211_rate *rate;
1316 unsigned int mrr_rate[3], mrr_tries[3];
1323 flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
1325 /* XXX endianness */
1326 bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
1329 rate = ieee80211_get_tx_rate(sc->hw, info);
1335 if (info->flags & IEEE80211_TX_CTL_NO_ACK)
1336 flags |= AR5K_TXDESC_NOACK;
1338 rc_flags = info->control.rates[0].flags;
1339 hw_rate = (rc_flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) ?
1340 rate->hw_value_short : rate->hw_value;
1344 /* FIXME: If we are in g mode and rate is a CCK rate
1345 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
1346 * from tx power (value is in dB units already) */
1347 if (info->control.hw_key) {
1348 keyidx = info->control.hw_key->hw_key_idx;
1349 pktlen += info->control.hw_key->icv_len;
1351 if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
1352 flags |= AR5K_TXDESC_RTSENA;
1353 cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
1354 duration = le16_to_cpu(ieee80211_rts_duration(sc->hw,
1355 sc->vif, pktlen, info));
1357 if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
1358 flags |= AR5K_TXDESC_CTSENA;
1359 cts_rate = ieee80211_get_rts_cts_rate(sc->hw, info)->hw_value;
1360 duration = le16_to_cpu(ieee80211_ctstoself_duration(sc->hw,
1361 sc->vif, pktlen, info));
1363 ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
1364 ieee80211_get_hdrlen_from_skb(skb), padsize,
1365 get_hw_packet_type(skb),
1366 (sc->power_level * 2),
1368 info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
1369 cts_rate, duration);
1373 memset(mrr_rate, 0, sizeof(mrr_rate));
1374 memset(mrr_tries, 0, sizeof(mrr_tries));
1375 for (i = 0; i < 3; i++) {
1376 rate = ieee80211_get_alt_retry_rate(sc->hw, info, i);
1380 mrr_rate[i] = rate->hw_value;
1381 mrr_tries[i] = info->control.rates[i + 1].count;
1384 ath5k_hw_setup_mrr_tx_desc(ah, ds,
1385 mrr_rate[0], mrr_tries[0],
1386 mrr_rate[1], mrr_tries[1],
1387 mrr_rate[2], mrr_tries[2]);
1390 ds->ds_data = bf->skbaddr;
1392 spin_lock_bh(&txq->lock);
1393 list_add_tail(&bf->list, &txq->q);
1394 if (txq->link == NULL) /* is this first packet? */
1395 ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
1396 else /* no, so only link it */
1397 *txq->link = bf->daddr;
1399 txq->link = &ds->ds_link;
1400 ath5k_hw_start_tx_dma(ah, txq->qnum);
1402 spin_unlock_bh(&txq->lock);
1406 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
1410 /*******************\
1411 * Descriptors setup *
1412 \*******************/
1415 ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
1417 struct ath5k_desc *ds;
1418 struct ath5k_buf *bf;
1423 /* allocate descriptors */
1424 sc->desc_len = sizeof(struct ath5k_desc) *
1425 (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
1426 sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
1427 if (sc->desc == NULL) {
1428 ATH5K_ERR(sc, "can't allocate descriptors\n");
1433 da = sc->desc_daddr;
1434 ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
1435 ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
1437 bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
1438 sizeof(struct ath5k_buf), GFP_KERNEL);
1440 ATH5K_ERR(sc, "can't allocate bufptr\n");
1446 INIT_LIST_HEAD(&sc->rxbuf);
1447 for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
1450 list_add_tail(&bf->list, &sc->rxbuf);
1453 INIT_LIST_HEAD(&sc->txbuf);
1454 sc->txbuf_len = ATH_TXBUF;
1455 for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
1456 da += sizeof(*ds)) {
1459 list_add_tail(&bf->list, &sc->txbuf);
1469 pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1476 ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
1478 struct ath5k_buf *bf;
1480 ath5k_txbuf_free_skb(sc, sc->bbuf);
1481 list_for_each_entry(bf, &sc->txbuf, list)
1482 ath5k_txbuf_free_skb(sc, bf);
1483 list_for_each_entry(bf, &sc->rxbuf, list)
1484 ath5k_rxbuf_free_skb(sc, bf);
1486 /* Free memory associated with all descriptors */
1487 pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1504 static struct ath5k_txq *
1505 ath5k_txq_setup(struct ath5k_softc *sc,
1506 int qtype, int subtype)
1508 struct ath5k_hw *ah = sc->ah;
1509 struct ath5k_txq *txq;
1510 struct ath5k_txq_info qi = {
1511 .tqi_subtype = subtype,
1512 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1513 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1514 .tqi_cw_max = AR5K_TXQ_USEDEFAULT
1519 * Enable interrupts only for EOL and DESC conditions.
1520 * We mark tx descriptors to receive a DESC interrupt
1521 * when a tx queue gets deep; otherwise waiting for the
1522 * EOL to reap descriptors. Note that this is done to
1523 * reduce interrupt load and this only defers reaping
1524 * descriptors, never transmitting frames. Aside from
1525 * reducing interrupts this also permits more concurrency.
1526 * The only potential downside is if the tx queue backs
1527 * up in which case the top half of the kernel may backup
1528 * due to a lack of tx descriptors.
1530 qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
1531 AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
1532 qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
1535 * NB: don't print a message, this happens
1536 * normally on parts with too few tx queues
1538 return ERR_PTR(qnum);
1540 if (qnum >= ARRAY_SIZE(sc->txqs)) {
1541 ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
1542 qnum, ARRAY_SIZE(sc->txqs));
1543 ath5k_hw_release_tx_queue(ah, qnum);
1544 return ERR_PTR(-EINVAL);
1546 txq = &sc->txqs[qnum];
1550 INIT_LIST_HEAD(&txq->q);
1551 spin_lock_init(&txq->lock);
1554 return &sc->txqs[qnum];
1558 ath5k_beaconq_setup(struct ath5k_hw *ah)
1560 struct ath5k_txq_info qi = {
1561 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1562 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1563 .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
1564 /* NB: for dynamic turbo, don't enable any other interrupts */
1565 .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
1568 return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
1572 ath5k_beaconq_config(struct ath5k_softc *sc)
1574 struct ath5k_hw *ah = sc->ah;
1575 struct ath5k_txq_info qi;
1578 ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
1582 if (sc->opmode == NL80211_IFTYPE_AP ||
1583 sc->opmode == NL80211_IFTYPE_MESH_POINT) {
1585 * Always burst out beacon and CAB traffic
1586 * (aifs = cwmin = cwmax = 0)
1591 } else if (sc->opmode == NL80211_IFTYPE_ADHOC) {
1593 * Adhoc mode; backoff between 0 and (2 * cw_min).
1597 qi.tqi_cw_max = 2 * ah->ah_cw_min;
1600 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
1601 "beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
1602 qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
1604 ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
1606 ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
1607 "hardware queue!\n", __func__);
1610 ret = ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */
1614 /* reconfigure cabq with ready time to 80% of beacon_interval */
1615 ret = ath5k_hw_get_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
1619 qi.tqi_ready_time = (sc->bintval * 80) / 100;
1620 ret = ath5k_hw_set_tx_queueprops(ah, AR5K_TX_QUEUE_ID_CAB, &qi);
1624 ret = ath5k_hw_reset_tx_queue(ah, AR5K_TX_QUEUE_ID_CAB);
1630 ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1632 struct ath5k_buf *bf, *bf0;
1635 * NB: this assumes output has been stopped and
1636 * we do not need to block ath5k_tx_tasklet
1638 spin_lock_bh(&txq->lock);
1639 list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1640 ath5k_debug_printtxbuf(sc, bf);
1642 ath5k_txbuf_free_skb(sc, bf);
1644 spin_lock_bh(&sc->txbuflock);
1645 list_move_tail(&bf->list, &sc->txbuf);
1647 spin_unlock_bh(&sc->txbuflock);
1650 spin_unlock_bh(&txq->lock);
1654 * Drain the transmit queues and reclaim resources.
1657 ath5k_txq_cleanup(struct ath5k_softc *sc)
1659 struct ath5k_hw *ah = sc->ah;
1662 /* XXX return value */
1663 if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
1664 /* don't touch the hardware if marked invalid */
1665 ath5k_hw_stop_tx_dma(ah, sc->bhalq);
1666 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
1667 ath5k_hw_get_txdp(ah, sc->bhalq));
1668 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1669 if (sc->txqs[i].setup) {
1670 ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
1671 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
1674 ath5k_hw_get_txdp(ah,
1680 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1681 if (sc->txqs[i].setup)
1682 ath5k_txq_drainq(sc, &sc->txqs[i]);
1686 ath5k_txq_release(struct ath5k_softc *sc)
1688 struct ath5k_txq *txq = sc->txqs;
1691 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
1693 ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
1706 * Enable the receive h/w following a reset.
1709 ath5k_rx_start(struct ath5k_softc *sc)
1711 struct ath5k_hw *ah = sc->ah;
1712 struct ath_common *common = ath5k_hw_common(ah);
1713 struct ath5k_buf *bf;
1716 common->rx_bufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz);
1718 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rx_bufsize %u\n",
1719 common->cachelsz, common->rx_bufsize);
1721 spin_lock_bh(&sc->rxbuflock);
1723 list_for_each_entry(bf, &sc->rxbuf, list) {
1724 ret = ath5k_rxbuf_setup(sc, bf);
1726 spin_unlock_bh(&sc->rxbuflock);
1730 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1731 ath5k_hw_set_rxdp(ah, bf->daddr);
1732 spin_unlock_bh(&sc->rxbuflock);
1734 ath5k_hw_start_rx_dma(ah); /* enable recv descriptors */
1735 ath5k_mode_setup(sc); /* set filters, etc. */
1736 ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
1744 * Disable the receive h/w in preparation for a reset.
1747 ath5k_rx_stop(struct ath5k_softc *sc)
1749 struct ath5k_hw *ah = sc->ah;
1751 ath5k_hw_stop_rx_pcu(ah); /* disable PCU */
1752 ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
1753 ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
1755 ath5k_debug_printrxbuffs(sc, ah);
1759 ath5k_rx_decrypted(struct ath5k_softc *sc, struct sk_buff *skb,
1760 struct ath5k_rx_status *rs)
1762 struct ath5k_hw *ah = sc->ah;
1763 struct ath_common *common = ath5k_hw_common(ah);
1764 struct ieee80211_hdr *hdr = (void *)skb->data;
1765 unsigned int keyix, hlen;
1767 if (!(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1768 rs->rs_keyix != AR5K_RXKEYIX_INVALID)
1769 return RX_FLAG_DECRYPTED;
1771 /* Apparently when a default key is used to decrypt the packet
1772 the hw does not set the index used to decrypt. In such cases
1773 get the index from the packet. */
1774 hlen = ieee80211_hdrlen(hdr->frame_control);
1775 if (ieee80211_has_protected(hdr->frame_control) &&
1776 !(rs->rs_status & AR5K_RXERR_DECRYPT) &&
1777 skb->len >= hlen + 4) {
1778 keyix = skb->data[hlen + 3] >> 6;
1780 if (test_bit(keyix, common->keymap))
1781 return RX_FLAG_DECRYPTED;
1789 ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
1790 struct ieee80211_rx_status *rxs)
1792 struct ath_common *common = ath5k_hw_common(sc->ah);
1795 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1797 if (ieee80211_is_beacon(mgmt->frame_control) &&
1798 le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
1799 memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) {
1801 * Received an IBSS beacon with the same BSSID. Hardware *must*
1802 * have updated the local TSF. We have to work around various
1803 * hardware bugs, though...
1805 tsf = ath5k_hw_get_tsf64(sc->ah);
1806 bc_tstamp = le64_to_cpu(mgmt->u.beacon.timestamp);
1807 hw_tu = TSF_TO_TU(tsf);
1809 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1810 "beacon %llx mactime %llx (diff %lld) tsf now %llx\n",
1811 (unsigned long long)bc_tstamp,
1812 (unsigned long long)rxs->mactime,
1813 (unsigned long long)(rxs->mactime - bc_tstamp),
1814 (unsigned long long)tsf);
1817 * Sometimes the HW will give us a wrong tstamp in the rx
1818 * status, causing the timestamp extension to go wrong.
1819 * (This seems to happen especially with beacon frames bigger
1820 * than 78 byte (incl. FCS))
1821 * But we know that the receive timestamp must be later than the
1822 * timestamp of the beacon since HW must have synced to that.
1824 * NOTE: here we assume mactime to be after the frame was
1825 * received, not like mac80211 which defines it at the start.
1827 if (bc_tstamp > rxs->mactime) {
1828 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
1829 "fixing mactime from %llx to %llx\n",
1830 (unsigned long long)rxs->mactime,
1831 (unsigned long long)tsf);
1836 * Local TSF might have moved higher than our beacon timers,
1837 * in that case we have to update them to continue sending
1838 * beacons. This also takes care of synchronizing beacon sending
1839 * times with other stations.
1841 if (hw_tu >= sc->nexttbtt)
1842 ath5k_beacon_update_timers(sc, bc_tstamp);
1847 ath5k_update_beacon_rssi(struct ath5k_softc *sc, struct sk_buff *skb, int rssi)
1849 struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
1850 struct ath5k_hw *ah = sc->ah;
1851 struct ath_common *common = ath5k_hw_common(ah);
1853 /* only beacons from our BSSID */
1854 if (!ieee80211_is_beacon(mgmt->frame_control) ||
1855 memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) != 0)
1858 ah->ah_beacon_rssi_avg = ath5k_moving_average(ah->ah_beacon_rssi_avg,
1861 /* in IBSS mode we should keep RSSI statistics per neighbour */
1862 /* le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS */
1866 * Compute padding position. skb must contains an IEEE 802.11 frame
1868 static int ath5k_common_padpos(struct sk_buff *skb)
1870 struct ieee80211_hdr * hdr = (struct ieee80211_hdr *)skb->data;
1871 __le16 frame_control = hdr->frame_control;
1874 if (ieee80211_has_a4(frame_control)) {
1877 if (ieee80211_is_data_qos(frame_control)) {
1878 padpos += IEEE80211_QOS_CTL_LEN;
1885 * This function expects a 802.11 frame and returns the number of
1886 * bytes added, or -1 if we don't have enought header room.
1889 static int ath5k_add_padding(struct sk_buff *skb)
1891 int padpos = ath5k_common_padpos(skb);
1892 int padsize = padpos & 3;
1894 if (padsize && skb->len>padpos) {
1896 if (skb_headroom(skb) < padsize)
1899 skb_push(skb, padsize);
1900 memmove(skb->data, skb->data+padsize, padpos);
1908 * This function expects a 802.11 frame and returns the number of
1912 static int ath5k_remove_padding(struct sk_buff *skb)
1914 int padpos = ath5k_common_padpos(skb);
1915 int padsize = padpos & 3;
1917 if (padsize && skb->len>=padpos+padsize) {
1918 memmove(skb->data + padsize, skb->data, padpos);
1919 skb_pull(skb, padsize);
1927 ath5k_receive_frame(struct ath5k_softc *sc, struct sk_buff *skb,
1928 struct ath5k_rx_status *rs)
1930 struct ieee80211_rx_status *rxs;
1932 /* The MAC header is padded to have 32-bit boundary if the
1933 * packet payload is non-zero. The general calculation for
1934 * padsize would take into account odd header lengths:
1935 * padsize = (4 - hdrlen % 4) % 4; However, since only
1936 * even-length headers are used, padding can only be 0 or 2
1937 * bytes and we can optimize this a bit. In addition, we must
1938 * not try to remove padding from short control frames that do
1939 * not have payload. */
1940 ath5k_remove_padding(skb);
1942 rxs = IEEE80211_SKB_RXCB(skb);
1945 if (unlikely(rs->rs_status & AR5K_RXERR_MIC))
1946 rxs->flag |= RX_FLAG_MMIC_ERROR;
1949 * always extend the mac timestamp, since this information is
1950 * also needed for proper IBSS merging.
1952 * XXX: it might be too late to do it here, since rs_tstamp is
1953 * 15bit only. that means TSF extension has to be done within
1954 * 32768usec (about 32ms). it might be necessary to move this to
1955 * the interrupt handler, like it is done in madwifi.
1957 * Unfortunately we don't know when the hardware takes the rx
1958 * timestamp (beginning of phy frame, data frame, end of rx?).
1959 * The only thing we know is that it is hardware specific...
1960 * On AR5213 it seems the rx timestamp is at the end of the
1961 * frame, but i'm not sure.
1963 * NOTE: mac80211 defines mactime at the beginning of the first
1964 * data symbol. Since we don't have any time references it's
1965 * impossible to comply to that. This affects IBSS merge only
1966 * right now, so it's not too bad...
1968 rxs->mactime = ath5k_extend_tsf(sc->ah, rs->rs_tstamp);
1969 rxs->flag |= RX_FLAG_TSFT;
1971 rxs->freq = sc->curchan->center_freq;
1972 rxs->band = sc->curband->band;
1974 rxs->signal = sc->ah->ah_noise_floor + rs->rs_rssi;
1976 rxs->antenna = rs->rs_antenna;
1978 if (rs->rs_antenna > 0 && rs->rs_antenna < 5)
1979 sc->stats.antenna_rx[rs->rs_antenna]++;
1981 sc->stats.antenna_rx[0]++; /* invalid */
1983 rxs->rate_idx = ath5k_hw_to_driver_rix(sc, rs->rs_rate);
1984 rxs->flag |= ath5k_rx_decrypted(sc, skb, rs);
1986 if (rxs->rate_idx >= 0 && rs->rs_rate ==
1987 sc->curband->bitrates[rxs->rate_idx].hw_value_short)
1988 rxs->flag |= RX_FLAG_SHORTPRE;
1990 ath5k_debug_dump_skb(sc, skb, "RX ", 0);
1992 ath5k_update_beacon_rssi(sc, skb, rs->rs_rssi);
1994 /* check beacons in IBSS mode */
1995 if (sc->opmode == NL80211_IFTYPE_ADHOC)
1996 ath5k_check_ibss_tsf(sc, skb, rxs);
1998 ieee80211_rx(sc->hw, skb);
2001 /** ath5k_frame_receive_ok() - Do we want to receive this frame or not?
2003 * Check if we want to further process this frame or not. Also update
2004 * statistics. Return true if we want this frame, false if not.
2007 ath5k_receive_frame_ok(struct ath5k_softc *sc, struct ath5k_rx_status *rs)
2009 sc->stats.rx_all_count++;
2011 if (unlikely(rs->rs_status)) {
2012 if (rs->rs_status & AR5K_RXERR_CRC)
2013 sc->stats.rxerr_crc++;
2014 if (rs->rs_status & AR5K_RXERR_FIFO)
2015 sc->stats.rxerr_fifo++;
2016 if (rs->rs_status & AR5K_RXERR_PHY) {
2017 sc->stats.rxerr_phy++;
2018 if (rs->rs_phyerr > 0 && rs->rs_phyerr < 32)
2019 sc->stats.rxerr_phy_code[rs->rs_phyerr]++;
2022 if (rs->rs_status & AR5K_RXERR_DECRYPT) {
2024 * Decrypt error. If the error occurred
2025 * because there was no hardware key, then
2026 * let the frame through so the upper layers
2027 * can process it. This is necessary for 5210
2028 * parts which have no way to setup a ``clear''
2031 * XXX do key cache faulting
2033 sc->stats.rxerr_decrypt++;
2034 if (rs->rs_keyix == AR5K_RXKEYIX_INVALID &&
2035 !(rs->rs_status & AR5K_RXERR_CRC))
2038 if (rs->rs_status & AR5K_RXERR_MIC) {
2039 sc->stats.rxerr_mic++;
2043 /* let crypto-error packets fall through in MNTR */
2044 if ((rs->rs_status & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
2045 sc->opmode != NL80211_IFTYPE_MONITOR)
2049 if (unlikely(rs->rs_more)) {
2050 sc->stats.rxerr_jumbo++;
2057 ath5k_tasklet_rx(unsigned long data)
2059 struct ath5k_rx_status rs = {};
2060 struct sk_buff *skb, *next_skb;
2061 dma_addr_t next_skb_addr;
2062 struct ath5k_softc *sc = (void *)data;
2063 struct ath5k_hw *ah = sc->ah;
2064 struct ath_common *common = ath5k_hw_common(ah);
2065 struct ath5k_buf *bf;
2066 struct ath5k_desc *ds;
2069 spin_lock(&sc->rxbuflock);
2070 if (list_empty(&sc->rxbuf)) {
2071 ATH5K_WARN(sc, "empty rx buf pool\n");
2075 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
2076 BUG_ON(bf->skb == NULL);
2080 /* bail if HW is still using self-linked descriptor */
2081 if (ath5k_hw_get_rxdp(sc->ah) == bf->daddr)
2084 ret = sc->ah->ah_proc_rx_desc(sc->ah, ds, &rs);
2085 if (unlikely(ret == -EINPROGRESS))
2087 else if (unlikely(ret)) {
2088 ATH5K_ERR(sc, "error in processing rx descriptor\n");
2089 sc->stats.rxerr_proc++;
2093 if (ath5k_receive_frame_ok(sc, &rs)) {
2094 next_skb = ath5k_rx_skb_alloc(sc, &next_skb_addr);
2097 * If we can't replace bf->skb with a new skb under
2098 * memory pressure, just skip this packet
2103 pci_unmap_single(sc->pdev, bf->skbaddr,
2105 PCI_DMA_FROMDEVICE);
2107 skb_put(skb, rs.rs_datalen);
2109 ath5k_receive_frame(sc, skb, &rs);
2112 bf->skbaddr = next_skb_addr;
2115 list_move_tail(&bf->list, &sc->rxbuf);
2116 } while (ath5k_rxbuf_setup(sc, bf) == 0);
2118 spin_unlock(&sc->rxbuflock);
2127 ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
2129 struct ath5k_tx_status ts = {};
2130 struct ath5k_buf *bf, *bf0;
2131 struct ath5k_desc *ds;
2132 struct sk_buff *skb;
2133 struct ieee80211_tx_info *info;
2136 spin_lock(&txq->lock);
2137 list_for_each_entry_safe(bf, bf0, &txq->q, list) {
2141 * It's possible that the hardware can say the buffer is
2142 * completed when it hasn't yet loaded the ds_link from
2143 * host memory and moved on. If there are more TX
2144 * descriptors in the queue, wait for TXDP to change
2145 * before processing this one.
2147 if (ath5k_hw_get_txdp(sc->ah, txq->qnum) == bf->daddr &&
2148 !list_is_last(&bf->list, &txq->q))
2151 ret = sc->ah->ah_proc_tx_desc(sc->ah, ds, &ts);
2152 if (unlikely(ret == -EINPROGRESS))
2154 else if (unlikely(ret)) {
2155 ATH5K_ERR(sc, "error %d while processing queue %u\n",
2160 sc->stats.tx_all_count++;
2162 info = IEEE80211_SKB_CB(skb);
2165 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
2168 ieee80211_tx_info_clear_status(info);
2169 for (i = 0; i < 4; i++) {
2170 struct ieee80211_tx_rate *r =
2171 &info->status.rates[i];
2173 if (ts.ts_rate[i]) {
2174 r->idx = ath5k_hw_to_driver_rix(sc, ts.ts_rate[i]);
2175 r->count = ts.ts_retry[i];
2182 /* count the successful attempt as well */
2183 info->status.rates[ts.ts_final_idx].count++;
2185 if (unlikely(ts.ts_status)) {
2186 sc->stats.ack_fail++;
2187 if (ts.ts_status & AR5K_TXERR_FILT) {
2188 info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
2189 sc->stats.txerr_filt++;
2191 if (ts.ts_status & AR5K_TXERR_XRETRY)
2192 sc->stats.txerr_retry++;
2193 if (ts.ts_status & AR5K_TXERR_FIFO)
2194 sc->stats.txerr_fifo++;
2196 info->flags |= IEEE80211_TX_STAT_ACK;
2197 info->status.ack_signal = ts.ts_rssi;
2201 * Remove MAC header padding before giving the frame
2204 ath5k_remove_padding(skb);
2206 if (ts.ts_antenna > 0 && ts.ts_antenna < 5)
2207 sc->stats.antenna_tx[ts.ts_antenna]++;
2209 sc->stats.antenna_tx[0]++; /* invalid */
2211 ieee80211_tx_status(sc->hw, skb);
2213 spin_lock(&sc->txbuflock);
2214 list_move_tail(&bf->list, &sc->txbuf);
2216 spin_unlock(&sc->txbuflock);
2218 if (likely(list_empty(&txq->q)))
2220 spin_unlock(&txq->lock);
2221 if (sc->txbuf_len > ATH_TXBUF / 5)
2222 ieee80211_wake_queues(sc->hw);
2226 ath5k_tasklet_tx(unsigned long data)
2229 struct ath5k_softc *sc = (void *)data;
2231 for (i=0; i < AR5K_NUM_TX_QUEUES; i++)
2232 if (sc->txqs[i].setup && (sc->ah->ah_txq_isr & BIT(i)))
2233 ath5k_tx_processq(sc, &sc->txqs[i]);
2242 * Setup the beacon frame for transmit.
2245 ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
2247 struct sk_buff *skb = bf->skb;
2248 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
2249 struct ath5k_hw *ah = sc->ah;
2250 struct ath5k_desc *ds;
2254 const int padsize = 0;
2256 bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
2258 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
2259 "skbaddr %llx\n", skb, skb->data, skb->len,
2260 (unsigned long long)bf->skbaddr);
2261 if (pci_dma_mapping_error(sc->pdev, bf->skbaddr)) {
2262 ATH5K_ERR(sc, "beacon DMA mapping failed\n");
2267 antenna = ah->ah_tx_ant;
2269 flags = AR5K_TXDESC_NOACK;
2270 if (sc->opmode == NL80211_IFTYPE_ADHOC && ath5k_hw_hasveol(ah)) {
2271 ds->ds_link = bf->daddr; /* self-linked */
2272 flags |= AR5K_TXDESC_VEOL;
2277 * If we use multiple antennas on AP and use
2278 * the Sectored AP scenario, switch antenna every
2279 * 4 beacons to make sure everybody hears our AP.
2280 * When a client tries to associate, hw will keep
2281 * track of the tx antenna to be used for this client
2282 * automaticaly, based on ACKed packets.
2284 * Note: AP still listens and transmits RTS on the
2285 * default antenna which is supposed to be an omni.
2287 * Note2: On sectored scenarios it's possible to have
2288 * multiple antennas (1omni -the default- and 14 sectors)
2289 * so if we choose to actually support this mode we need
2290 * to allow user to set how many antennas we have and tweak
2291 * the code below to send beacons on all of them.
2293 if (ah->ah_ant_mode == AR5K_ANTMODE_SECTOR_AP)
2294 antenna = sc->bsent & 4 ? 2 : 1;
2297 /* FIXME: If we are in g mode and rate is a CCK rate
2298 * subtract ah->ah_txpower.txp_cck_ofdm_pwr_delta
2299 * from tx power (value is in dB units already) */
2300 ds->ds_data = bf->skbaddr;
2301 ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
2302 ieee80211_get_hdrlen_from_skb(skb), padsize,
2303 AR5K_PKT_TYPE_BEACON, (sc->power_level * 2),
2304 ieee80211_get_tx_rate(sc->hw, info)->hw_value,
2305 1, AR5K_TXKEYIX_INVALID,
2306 antenna, flags, 0, 0);
2312 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
2317 * Transmit a beacon frame at SWBA. Dynamic updates to the
2318 * frame contents are done as needed and the slot time is
2319 * also adjusted based on current state.
2321 * This is called from software irq context (beacontq tasklets)
2322 * or user context from ath5k_beacon_config.
2325 ath5k_beacon_send(struct ath5k_softc *sc)
2327 struct ath5k_buf *bf = sc->bbuf;
2328 struct ath5k_hw *ah = sc->ah;
2329 struct sk_buff *skb;
2331 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "in beacon_send\n");
2333 if (unlikely(bf->skb == NULL || sc->opmode == NL80211_IFTYPE_STATION ||
2334 sc->opmode == NL80211_IFTYPE_MONITOR)) {
2335 ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
2339 * Check if the previous beacon has gone out. If
2340 * not don't don't try to post another, skip this
2341 * period and wait for the next. Missed beacons
2342 * indicate a problem and should not occur. If we
2343 * miss too many consecutive beacons reset the device.
2345 if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
2347 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2348 "missed %u consecutive beacons\n", sc->bmisscount);
2349 if (sc->bmisscount > 10) { /* NB: 10 is a guess */
2350 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2351 "stuck beacon time (%u missed)\n",
2353 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2354 "stuck beacon, resetting\n");
2355 ieee80211_queue_work(sc->hw, &sc->reset_work);
2359 if (unlikely(sc->bmisscount != 0)) {
2360 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2361 "resume beacon xmit after %u misses\n",
2367 * Stop any current dma and put the new frame on the queue.
2368 * This should never fail since we check above that no frames
2369 * are still pending on the queue.
2371 if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
2372 ATH5K_WARN(sc, "beacon queue %u didn't start/stop ?\n", sc->bhalq);
2373 /* NB: hw still stops DMA, so proceed */
2376 /* refresh the beacon for AP mode */
2377 if (sc->opmode == NL80211_IFTYPE_AP)
2378 ath5k_beacon_update(sc->hw, sc->vif);
2380 ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
2381 ath5k_hw_start_tx_dma(ah, sc->bhalq);
2382 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
2383 sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
2385 skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
2387 ath5k_tx_queue(sc->hw, skb, sc->cabq);
2388 skb = ieee80211_get_buffered_bc(sc->hw, sc->vif);
2396 * ath5k_beacon_update_timers - update beacon timers
2398 * @sc: struct ath5k_softc pointer we are operating on
2399 * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
2400 * beacon timer update based on the current HW TSF.
2402 * Calculate the next target beacon transmit time (TBTT) based on the timestamp
2403 * of a received beacon or the current local hardware TSF and write it to the
2404 * beacon timer registers.
2406 * This is called in a variety of situations, e.g. when a beacon is received,
2407 * when a TSF update has been detected, but also when an new IBSS is created or
2408 * when we otherwise know we have to update the timers, but we keep it in this
2409 * function to have it all together in one place.
2412 ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
2414 struct ath5k_hw *ah = sc->ah;
2415 u32 nexttbtt, intval, hw_tu, bc_tu;
2418 intval = sc->bintval & AR5K_BEACON_PERIOD;
2419 if (WARN_ON(!intval))
2422 /* beacon TSF converted to TU */
2423 bc_tu = TSF_TO_TU(bc_tsf);
2425 /* current TSF converted to TU */
2426 hw_tsf = ath5k_hw_get_tsf64(ah);
2427 hw_tu = TSF_TO_TU(hw_tsf);
2430 /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
2433 * no beacons received, called internally.
2434 * just need to refresh timers based on HW TSF.
2436 nexttbtt = roundup(hw_tu + FUDGE, intval);
2437 } else if (bc_tsf == 0) {
2439 * no beacon received, probably called by ath5k_reset_tsf().
2440 * reset TSF to start with 0.
2443 intval |= AR5K_BEACON_RESET_TSF;
2444 } else if (bc_tsf > hw_tsf) {
2446 * beacon received, SW merge happend but HW TSF not yet updated.
2447 * not possible to reconfigure timers yet, but next time we
2448 * receive a beacon with the same BSSID, the hardware will
2449 * automatically update the TSF and then we need to reconfigure
2452 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2453 "need to wait for HW TSF sync\n");
2457 * most important case for beacon synchronization between STA.
2459 * beacon received and HW TSF has been already updated by HW.
2460 * update next TBTT based on the TSF of the beacon, but make
2461 * sure it is ahead of our local TSF timer.
2463 nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
2467 sc->nexttbtt = nexttbtt;
2469 intval |= AR5K_BEACON_ENA;
2470 ath5k_hw_init_beacon(ah, nexttbtt, intval);
2473 * debugging output last in order to preserve the time critical aspect
2477 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2478 "reconfigured timers based on HW TSF\n");
2479 else if (bc_tsf == 0)
2480 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2481 "reset HW TSF and timers\n");
2483 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2484 "updated timers based on beacon TSF\n");
2486 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2487 "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
2488 (unsigned long long) bc_tsf,
2489 (unsigned long long) hw_tsf, bc_tu, hw_tu, nexttbtt);
2490 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
2491 intval & AR5K_BEACON_PERIOD,
2492 intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
2493 intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
2498 * ath5k_beacon_config - Configure the beacon queues and interrupts
2500 * @sc: struct ath5k_softc pointer we are operating on
2502 * In IBSS mode we use a self-linked tx descriptor if possible. We enable SWBA
2503 * interrupts to detect TSF updates only.
2506 ath5k_beacon_config(struct ath5k_softc *sc)
2508 struct ath5k_hw *ah = sc->ah;
2509 unsigned long flags;
2511 spin_lock_irqsave(&sc->block, flags);
2513 sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
2515 if (sc->enable_beacon) {
2517 * In IBSS mode we use a self-linked tx descriptor and let the
2518 * hardware send the beacons automatically. We have to load it
2520 * We use the SWBA interrupt only to keep track of the beacon
2521 * timers in order to detect automatic TSF updates.
2523 ath5k_beaconq_config(sc);
2525 sc->imask |= AR5K_INT_SWBA;
2527 if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2528 if (ath5k_hw_hasveol(ah))
2529 ath5k_beacon_send(sc);
2531 ath5k_beacon_update_timers(sc, -1);
2533 ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
2536 ath5k_hw_set_imr(ah, sc->imask);
2538 spin_unlock_irqrestore(&sc->block, flags);
2541 static void ath5k_tasklet_beacon(unsigned long data)
2543 struct ath5k_softc *sc = (struct ath5k_softc *) data;
2546 * Software beacon alert--time to send a beacon.
2548 * In IBSS mode we use this interrupt just to
2549 * keep track of the next TBTT (target beacon
2550 * transmission time) in order to detect wether
2551 * automatic TSF updates happened.
2553 if (sc->opmode == NL80211_IFTYPE_ADHOC) {
2554 /* XXX: only if VEOL suppported */
2555 u64 tsf = ath5k_hw_get_tsf64(sc->ah);
2556 sc->nexttbtt += sc->bintval;
2557 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON,
2558 "SWBA nexttbtt: %x hw_tu: %x "
2562 (unsigned long long) tsf);
2564 spin_lock(&sc->block);
2565 ath5k_beacon_send(sc);
2566 spin_unlock(&sc->block);
2571 /********************\
2572 * Interrupt handling *
2573 \********************/
2576 ath5k_init(struct ath5k_softc *sc)
2578 struct ath5k_hw *ah = sc->ah;
2581 mutex_lock(&sc->lock);
2583 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
2586 * Stop anything previously setup. This is safe
2587 * no matter this is the first time through or not.
2589 ath5k_stop_locked(sc);
2592 * The basic interface to setting the hardware in a good
2593 * state is ``reset''. On return the hardware is known to
2594 * be powered up and with interrupts disabled. This must
2595 * be followed by initialization of the appropriate bits
2596 * and then setup of the interrupt mask.
2598 sc->curchan = sc->hw->conf.channel;
2599 sc->curband = &sc->sbands[sc->curchan->band];
2600 sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
2601 AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
2602 AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
2604 ret = ath5k_reset(sc, NULL);
2608 ath5k_rfkill_hw_start(ah);
2611 * Reset the key cache since some parts do not reset the
2612 * contents on initial power up or resume from suspend.
2614 for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
2615 ath5k_hw_reset_key(ah, i);
2617 ath5k_hw_set_ack_bitrate_high(ah, true);
2621 mutex_unlock(&sc->lock);
2626 ath5k_stop_locked(struct ath5k_softc *sc)
2628 struct ath5k_hw *ah = sc->ah;
2630 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
2631 test_bit(ATH_STAT_INVALID, sc->status));
2634 * Shutdown the hardware and driver:
2635 * stop output from above
2636 * disable interrupts
2638 * turn off the radio
2639 * clear transmit machinery
2640 * clear receive machinery
2641 * drain and release tx queues
2642 * reclaim beacon resources
2643 * power down hardware
2645 * Note that some of this work is not possible if the
2646 * hardware is gone (invalid).
2648 ieee80211_stop_queues(sc->hw);
2650 if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2652 ath5k_hw_set_imr(ah, 0);
2653 synchronize_irq(sc->pdev->irq);
2655 ath5k_txq_cleanup(sc);
2656 if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2658 ath5k_hw_phy_disable(ah);
2664 static void stop_tasklets(struct ath5k_softc *sc)
2666 tasklet_kill(&sc->rxtq);
2667 tasklet_kill(&sc->txtq);
2668 tasklet_kill(&sc->calib);
2669 tasklet_kill(&sc->beacontq);
2670 tasklet_kill(&sc->ani_tasklet);
2674 * Stop the device, grabbing the top-level lock to protect
2675 * against concurrent entry through ath5k_init (which can happen
2676 * if another thread does a system call and the thread doing the
2677 * stop is preempted).
2680 ath5k_stop_hw(struct ath5k_softc *sc)
2684 mutex_lock(&sc->lock);
2685 ret = ath5k_stop_locked(sc);
2686 if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
2688 * Don't set the card in full sleep mode!
2690 * a) When the device is in this state it must be carefully
2691 * woken up or references to registers in the PCI clock
2692 * domain may freeze the bus (and system). This varies
2693 * by chip and is mostly an issue with newer parts
2694 * (madwifi sources mentioned srev >= 0x78) that go to
2695 * sleep more quickly.
2697 * b) On older chips full sleep results a weird behaviour
2698 * during wakeup. I tested various cards with srev < 0x78
2699 * and they don't wake up after module reload, a second
2700 * module reload is needed to bring the card up again.
2702 * Until we figure out what's going on don't enable
2703 * full chip reset on any chip (this is what Legacy HAL
2704 * and Sam's HAL do anyway). Instead Perform a full reset
2705 * on the device (same as initial state after attach) and
2706 * leave it idle (keep MAC/BB on warm reset) */
2707 ret = ath5k_hw_on_hold(sc->ah);
2709 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2710 "putting device to sleep\n");
2712 ath5k_txbuf_free_skb(sc, sc->bbuf);
2715 mutex_unlock(&sc->lock);
2719 ath5k_rfkill_hw_stop(sc->ah);
2725 ath5k_intr_calibration_poll(struct ath5k_hw *ah)
2727 if (time_is_before_eq_jiffies(ah->ah_cal_next_ani) &&
2728 !(ah->ah_cal_mask & AR5K_CALIBRATION_FULL)) {
2729 /* run ANI only when full calibration is not active */
2730 ah->ah_cal_next_ani = jiffies +
2731 msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_ANI);
2732 tasklet_schedule(&ah->ah_sc->ani_tasklet);
2734 } else if (time_is_before_eq_jiffies(ah->ah_cal_next_full)) {
2735 ah->ah_cal_next_full = jiffies +
2736 msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_FULL);
2737 tasklet_schedule(&ah->ah_sc->calib);
2739 /* we could use SWI to generate enough interrupts to meet our
2740 * calibration interval requirements, if necessary:
2741 * AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI); */
2745 ath5k_intr(int irq, void *dev_id)
2747 struct ath5k_softc *sc = dev_id;
2748 struct ath5k_hw *ah = sc->ah;
2749 enum ath5k_int status;
2750 unsigned int counter = 1000;
2752 if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
2753 !ath5k_hw_is_intr_pending(ah)))
2757 ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
2758 ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
2760 if (unlikely(status & AR5K_INT_FATAL)) {
2762 * Fatal errors are unrecoverable.
2763 * Typically these are caused by DMA errors.
2765 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2766 "fatal int, resetting\n");
2767 ieee80211_queue_work(sc->hw, &sc->reset_work);
2768 } else if (unlikely(status & AR5K_INT_RXORN)) {
2770 * Receive buffers are full. Either the bus is busy or
2771 * the CPU is not fast enough to process all received
2773 * Older chipsets need a reset to come out of this
2774 * condition, but we treat it as RX for newer chips.
2775 * We don't know exactly which versions need a reset -
2776 * this guess is copied from the HAL.
2778 sc->stats.rxorn_intr++;
2779 if (ah->ah_mac_srev < AR5K_SREV_AR5212) {
2780 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2781 "rx overrun, resetting\n");
2782 ieee80211_queue_work(sc->hw, &sc->reset_work);
2785 tasklet_schedule(&sc->rxtq);
2787 if (status & AR5K_INT_SWBA) {
2788 tasklet_hi_schedule(&sc->beacontq);
2790 if (status & AR5K_INT_RXEOL) {
2792 * NB: the hardware should re-read the link when
2793 * RXE bit is written, but it doesn't work at
2794 * least on older hardware revs.
2796 sc->stats.rxeol_intr++;
2798 if (status & AR5K_INT_TXURN) {
2799 /* bump tx trigger level */
2800 ath5k_hw_update_tx_triglevel(ah, true);
2802 if (status & (AR5K_INT_RXOK | AR5K_INT_RXERR))
2803 tasklet_schedule(&sc->rxtq);
2804 if (status & (AR5K_INT_TXOK | AR5K_INT_TXDESC
2805 | AR5K_INT_TXERR | AR5K_INT_TXEOL))
2806 tasklet_schedule(&sc->txtq);
2807 if (status & AR5K_INT_BMISS) {
2810 if (status & AR5K_INT_MIB) {
2811 sc->stats.mib_intr++;
2812 ath5k_hw_update_mib_counters(ah);
2813 ath5k_ani_mib_intr(ah);
2815 if (status & AR5K_INT_GPIO)
2816 tasklet_schedule(&sc->rf_kill.toggleq);
2819 } while (ath5k_hw_is_intr_pending(ah) && --counter > 0);
2821 if (unlikely(!counter))
2822 ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
2824 ath5k_intr_calibration_poll(ah);
2830 * Periodically recalibrate the PHY to account
2831 * for temperature/environment changes.
2834 ath5k_tasklet_calibrate(unsigned long data)
2836 struct ath5k_softc *sc = (void *)data;
2837 struct ath5k_hw *ah = sc->ah;
2839 /* Only full calibration for now */
2840 ah->ah_cal_mask |= AR5K_CALIBRATION_FULL;
2842 ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
2843 ieee80211_frequency_to_channel(sc->curchan->center_freq),
2844 sc->curchan->hw_value);
2846 if (ath5k_hw_gainf_calibrate(ah) == AR5K_RFGAIN_NEED_CHANGE) {
2848 * Rfgain is out of bounds, reset the chip
2849 * to load new gain values.
2851 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
2852 ieee80211_queue_work(sc->hw, &sc->reset_work);
2854 if (ath5k_hw_phy_calibrate(ah, sc->curchan))
2855 ATH5K_ERR(sc, "calibration of channel %u failed\n",
2856 ieee80211_frequency_to_channel(
2857 sc->curchan->center_freq));
2859 /* Noise floor calibration interrupts rx/tx path while I/Q calibration
2860 * doesn't. We stop the queues so that calibration doesn't interfere
2861 * with TX and don't run it as often */
2862 if (time_is_before_eq_jiffies(ah->ah_cal_next_nf)) {
2863 ah->ah_cal_next_nf = jiffies +
2864 msecs_to_jiffies(ATH5K_TUNE_CALIBRATION_INTERVAL_NF);
2865 ieee80211_stop_queues(sc->hw);
2866 ath5k_hw_update_noise_floor(ah);
2867 ieee80211_wake_queues(sc->hw);
2870 ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;
2875 ath5k_tasklet_ani(unsigned long data)
2877 struct ath5k_softc *sc = (void *)data;
2878 struct ath5k_hw *ah = sc->ah;
2880 ah->ah_cal_mask |= AR5K_CALIBRATION_ANI;
2881 ath5k_ani_calibration(ah);
2882 ah->ah_cal_mask &= ~AR5K_CALIBRATION_ANI;
2886 /********************\
2887 * Mac80211 functions *
2888 \********************/
2891 ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
2893 struct ath5k_softc *sc = hw->priv;
2895 return ath5k_tx_queue(hw, skb, sc->txq);
2898 static int ath5k_tx_queue(struct ieee80211_hw *hw, struct sk_buff *skb,
2899 struct ath5k_txq *txq)
2901 struct ath5k_softc *sc = hw->priv;
2902 struct ath5k_buf *bf;
2903 unsigned long flags;
2906 ath5k_debug_dump_skb(sc, skb, "TX ", 1);
2908 if (sc->opmode == NL80211_IFTYPE_MONITOR)
2909 ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
2912 * the hardware expects the header padded to 4 byte boundaries
2913 * if this is not the case we add the padding after the header
2915 padsize = ath5k_add_padding(skb);
2917 ATH5K_ERR(sc, "tx hdrlen not %%4: not enough"
2918 " headroom to pad");
2922 spin_lock_irqsave(&sc->txbuflock, flags);
2923 if (list_empty(&sc->txbuf)) {
2924 ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
2925 spin_unlock_irqrestore(&sc->txbuflock, flags);
2926 ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
2929 bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
2930 list_del(&bf->list);
2932 if (list_empty(&sc->txbuf))
2933 ieee80211_stop_queues(hw);
2934 spin_unlock_irqrestore(&sc->txbuflock, flags);
2938 if (ath5k_txbuf_setup(sc, bf, txq, padsize)) {
2940 spin_lock_irqsave(&sc->txbuflock, flags);
2941 list_add_tail(&bf->list, &sc->txbuf);
2943 spin_unlock_irqrestore(&sc->txbuflock, flags);
2946 return NETDEV_TX_OK;
2949 dev_kfree_skb_any(skb);
2950 return NETDEV_TX_OK;
2954 * Reset the hardware. If chan is not NULL, then also pause rx/tx
2955 * and change to the given channel.
2957 * This should be called with sc->lock.
2960 ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
2962 struct ath5k_hw *ah = sc->ah;
2965 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
2967 ath5k_hw_set_imr(ah, 0);
2968 synchronize_irq(sc->pdev->irq);
2972 ath5k_txq_cleanup(sc);
2976 sc->curband = &sc->sbands[chan->band];
2978 ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
2980 ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
2984 ret = ath5k_rx_start(sc);
2986 ATH5K_ERR(sc, "can't start recv logic\n");
2990 ath5k_ani_init(ah, ah->ah_sc->ani_state.ani_mode);
2992 ah->ah_cal_next_full = jiffies;
2993 ah->ah_cal_next_ani = jiffies;
2994 ah->ah_cal_next_nf = jiffies;
2997 * Change channels and update the h/w rate map if we're switching;
2998 * e.g. 11a to 11b/g.
3000 * We may be doing a reset in response to an ioctl that changes the
3001 * channel so update any state that might change as a result.
3005 /* ath5k_chan_change(sc, c); */
3007 ath5k_beacon_config(sc);
3008 /* intrs are enabled by ath5k_beacon_config */
3010 ieee80211_wake_queues(sc->hw);
3017 static void ath5k_reset_work(struct work_struct *work)
3019 struct ath5k_softc *sc = container_of(work, struct ath5k_softc,
3022 mutex_lock(&sc->lock);
3023 ath5k_reset(sc, sc->curchan);
3024 mutex_unlock(&sc->lock);
3027 static int ath5k_start(struct ieee80211_hw *hw)
3029 return ath5k_init(hw->priv);
3032 static void ath5k_stop(struct ieee80211_hw *hw)
3034 ath5k_stop_hw(hw->priv);
3037 static int ath5k_add_interface(struct ieee80211_hw *hw,
3038 struct ieee80211_vif *vif)
3040 struct ath5k_softc *sc = hw->priv;
3043 mutex_lock(&sc->lock);
3051 switch (vif->type) {
3052 case NL80211_IFTYPE_AP:
3053 case NL80211_IFTYPE_STATION:
3054 case NL80211_IFTYPE_ADHOC:
3055 case NL80211_IFTYPE_MESH_POINT:
3056 case NL80211_IFTYPE_MONITOR:
3057 sc->opmode = vif->type;
3064 ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "add interface mode %d\n", sc->opmode);
3066 ath5k_hw_set_lladdr(sc->ah, vif->addr);
3067 ath5k_mode_setup(sc);
3071 mutex_unlock(&sc->lock);
3076 ath5k_remove_interface(struct ieee80211_hw *hw,
3077 struct ieee80211_vif *vif)
3079 struct ath5k_softc *sc = hw->priv;
3080 u8 mac[ETH_ALEN] = {};
3082 mutex_lock(&sc->lock);
3086 ath5k_hw_set_lladdr(sc->ah, mac);
3089 mutex_unlock(&sc->lock);
3093 * TODO: Phy disable/diversity etc
3096 ath5k_config(struct ieee80211_hw *hw, u32 changed)
3098 struct ath5k_softc *sc = hw->priv;
3099 struct ath5k_hw *ah = sc->ah;
3100 struct ieee80211_conf *conf = &hw->conf;
3103 mutex_lock(&sc->lock);
3105 if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
3106 ret = ath5k_chan_set(sc, conf->channel);
3111 if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
3112 (sc->power_level != conf->power_level)) {
3113 sc->power_level = conf->power_level;
3116 ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
3120 * 1) Move this on config_interface and handle each case
3121 * separately eg. when we have only one STA vif, use
3122 * AR5K_ANTMODE_SINGLE_AP
3124 * 2) Allow the user to change antenna mode eg. when only
3125 * one antenna is present
3127 * 3) Allow the user to set default/tx antenna when possible
3129 * 4) Default mode should handle 90% of the cases, together
3130 * with fixed a/b and single AP modes we should be able to
3131 * handle 99%. Sectored modes are extreme cases and i still
3132 * haven't found a usage for them. If we decide to support them,
3133 * then we must allow the user to set how many tx antennas we
3136 ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
3139 mutex_unlock(&sc->lock);
3143 static u64 ath5k_prepare_multicast(struct ieee80211_hw *hw,
3144 struct netdev_hw_addr_list *mc_list)
3148 struct netdev_hw_addr *ha;
3153 netdev_hw_addr_list_for_each(ha, mc_list) {
3154 /* calculate XOR of eight 6-bit values */
3155 val = get_unaligned_le32(ha->addr + 0);
3156 pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
3157 val = get_unaligned_le32(ha->addr + 3);
3158 pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
3160 mfilt[pos / 32] |= (1 << (pos % 32));
3161 /* XXX: we might be able to just do this instead,
3162 * but not sure, needs testing, if we do use this we'd
3163 * neet to inform below to not reset the mcast */
3164 /* ath5k_hw_set_mcast_filterindex(ah,
3168 return ((u64)(mfilt[1]) << 32) | mfilt[0];
3171 #define SUPPORTED_FIF_FLAGS \
3172 FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
3173 FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
3174 FIF_BCN_PRBRESP_PROMISC
3176 * o always accept unicast, broadcast, and multicast traffic
3177 * o multicast traffic for all BSSIDs will be enabled if mac80211
3179 * o maintain current state of phy ofdm or phy cck error reception.
3180 * If the hardware detects any of these type of errors then
3181 * ath5k_hw_get_rx_filter() will pass to us the respective
3182 * hardware filters to be able to receive these type of frames.
3183 * o probe request frames are accepted only when operating in
3184 * hostap, adhoc, or monitor modes
3185 * o enable promiscuous mode according to the interface state
3187 * - when operating in adhoc mode so the 802.11 layer creates
3188 * node table entries for peers,
3189 * - when operating in station mode for collecting rssi data when
3190 * the station is otherwise quiet, or
3193 static void ath5k_configure_filter(struct ieee80211_hw *hw,
3194 unsigned int changed_flags,
3195 unsigned int *new_flags,
3198 struct ath5k_softc *sc = hw->priv;
3199 struct ath5k_hw *ah = sc->ah;
3200 u32 mfilt[2], rfilt;
3202 mutex_lock(&sc->lock);
3204 mfilt[0] = multicast;
3205 mfilt[1] = multicast >> 32;
3207 /* Only deal with supported flags */
3208 changed_flags &= SUPPORTED_FIF_FLAGS;
3209 *new_flags &= SUPPORTED_FIF_FLAGS;
3211 /* If HW detects any phy or radar errors, leave those filters on.
3212 * Also, always enable Unicast, Broadcasts and Multicast
3213 * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
3214 rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
3215 (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
3216 AR5K_RX_FILTER_MCAST);
3218 if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
3219 if (*new_flags & FIF_PROMISC_IN_BSS) {
3220 __set_bit(ATH_STAT_PROMISC, sc->status);
3222 __clear_bit(ATH_STAT_PROMISC, sc->status);
3226 if (test_bit(ATH_STAT_PROMISC, sc->status))
3227 rfilt |= AR5K_RX_FILTER_PROM;
3229 /* Note, AR5K_RX_FILTER_MCAST is already enabled */
3230 if (*new_flags & FIF_ALLMULTI) {
3235 /* This is the best we can do */
3236 if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
3237 rfilt |= AR5K_RX_FILTER_PHYERR;
3239 /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
3240 * and probes for any BSSID, this needs testing */
3241 if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
3242 rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
3244 /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
3245 * set we should only pass on control frames for this
3246 * station. This needs testing. I believe right now this
3247 * enables *all* control frames, which is OK.. but
3248 * but we should see if we can improve on granularity */
3249 if (*new_flags & FIF_CONTROL)
3250 rfilt |= AR5K_RX_FILTER_CONTROL;
3252 /* Additional settings per mode -- this is per ath5k */
3254 /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
3256 switch (sc->opmode) {
3257 case NL80211_IFTYPE_MESH_POINT:
3258 case NL80211_IFTYPE_MONITOR:
3259 rfilt |= AR5K_RX_FILTER_CONTROL |
3260 AR5K_RX_FILTER_BEACON |
3261 AR5K_RX_FILTER_PROBEREQ |
3262 AR5K_RX_FILTER_PROM;
3264 case NL80211_IFTYPE_AP:
3265 case NL80211_IFTYPE_ADHOC:
3266 rfilt |= AR5K_RX_FILTER_PROBEREQ |
3267 AR5K_RX_FILTER_BEACON;
3269 case NL80211_IFTYPE_STATION:
3271 rfilt |= AR5K_RX_FILTER_BEACON;
3277 ath5k_hw_set_rx_filter(ah, rfilt);
3279 /* Set multicast bits */
3280 ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
3281 /* Set the cached hw filter flags, this will alter actually
3283 sc->filter_flags = rfilt;
3285 mutex_unlock(&sc->lock);
3289 ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
3290 struct ieee80211_vif *vif, struct ieee80211_sta *sta,
3291 struct ieee80211_key_conf *key)
3293 struct ath5k_softc *sc = hw->priv;
3294 struct ath5k_hw *ah = sc->ah;
3295 struct ath_common *common = ath5k_hw_common(ah);
3298 if (modparam_nohwcrypt)
3301 if (sc->opmode == NL80211_IFTYPE_AP)
3309 if (sc->ah->ah_aes_support)
3318 mutex_lock(&sc->lock);
3322 ret = ath5k_hw_set_key(sc->ah, key->keyidx, key,
3323 sta ? sta->addr : NULL);
3325 ATH5K_ERR(sc, "can't set the key\n");
3328 __set_bit(key->keyidx, common->keymap);
3329 key->hw_key_idx = key->keyidx;
3330 key->flags |= (IEEE80211_KEY_FLAG_GENERATE_IV |
3331 IEEE80211_KEY_FLAG_GENERATE_MMIC);
3334 ath5k_hw_reset_key(sc->ah, key->keyidx);
3335 __clear_bit(key->keyidx, common->keymap);
3344 mutex_unlock(&sc->lock);
3349 ath5k_get_stats(struct ieee80211_hw *hw,
3350 struct ieee80211_low_level_stats *stats)
3352 struct ath5k_softc *sc = hw->priv;
3355 ath5k_hw_update_mib_counters(sc->ah);
3357 stats->dot11ACKFailureCount = sc->stats.ack_fail;
3358 stats->dot11RTSFailureCount = sc->stats.rts_fail;
3359 stats->dot11RTSSuccessCount = sc->stats.rts_ok;
3360 stats->dot11FCSErrorCount = sc->stats.fcs_error;
3365 static int ath5k_get_survey(struct ieee80211_hw *hw, int idx,
3366 struct survey_info *survey)
3368 struct ath5k_softc *sc = hw->priv;
3369 struct ieee80211_conf *conf = &hw->conf;
3374 survey->channel = conf->channel;
3375 survey->filled = SURVEY_INFO_NOISE_DBM;
3376 survey->noise = sc->ah->ah_noise_floor;
3382 ath5k_get_tsf(struct ieee80211_hw *hw)
3384 struct ath5k_softc *sc = hw->priv;
3386 return ath5k_hw_get_tsf64(sc->ah);
3390 ath5k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
3392 struct ath5k_softc *sc = hw->priv;
3394 ath5k_hw_set_tsf64(sc->ah, tsf);
3398 ath5k_reset_tsf(struct ieee80211_hw *hw)
3400 struct ath5k_softc *sc = hw->priv;
3403 * in IBSS mode we need to update the beacon timers too.
3404 * this will also reset the TSF if we call it with 0
3406 if (sc->opmode == NL80211_IFTYPE_ADHOC)
3407 ath5k_beacon_update_timers(sc, 0);
3409 ath5k_hw_reset_tsf(sc->ah);
3413 * Updates the beacon that is sent by ath5k_beacon_send. For adhoc,
3414 * this is called only once at config_bss time, for AP we do it every
3415 * SWBA interrupt so that the TIM will reflect buffered frames.
3417 * Called with the beacon lock.
3420 ath5k_beacon_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
3423 struct ath5k_softc *sc = hw->priv;
3424 struct sk_buff *skb;
3426 if (WARN_ON(!vif)) {
3431 skb = ieee80211_beacon_get(hw, vif);
3438 ath5k_debug_dump_skb(sc, skb, "BC ", 1);
3440 ath5k_txbuf_free_skb(sc, sc->bbuf);
3441 sc->bbuf->skb = skb;
3442 ret = ath5k_beacon_setup(sc, sc->bbuf);
3444 sc->bbuf->skb = NULL;
3450 set_beacon_filter(struct ieee80211_hw *hw, bool enable)
3452 struct ath5k_softc *sc = hw->priv;
3453 struct ath5k_hw *ah = sc->ah;
3455 rfilt = ath5k_hw_get_rx_filter(ah);
3457 rfilt |= AR5K_RX_FILTER_BEACON;
3459 rfilt &= ~AR5K_RX_FILTER_BEACON;
3460 ath5k_hw_set_rx_filter(ah, rfilt);
3461 sc->filter_flags = rfilt;
3464 static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
3465 struct ieee80211_vif *vif,
3466 struct ieee80211_bss_conf *bss_conf,
3469 struct ath5k_softc *sc = hw->priv;
3470 struct ath5k_hw *ah = sc->ah;
3471 struct ath_common *common = ath5k_hw_common(ah);
3472 unsigned long flags;
3474 mutex_lock(&sc->lock);
3475 if (WARN_ON(sc->vif != vif))
3478 if (changes & BSS_CHANGED_BSSID) {
3479 /* Cache for later use during resets */
3480 memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
3482 ath5k_hw_set_associd(ah);
3486 if (changes & BSS_CHANGED_BEACON_INT)
3487 sc->bintval = bss_conf->beacon_int;
3489 if (changes & BSS_CHANGED_ASSOC) {
3490 sc->assoc = bss_conf->assoc;
3491 if (sc->opmode == NL80211_IFTYPE_STATION)
3492 set_beacon_filter(hw, sc->assoc);
3493 ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
3494 AR5K_LED_ASSOC : AR5K_LED_INIT);
3495 if (bss_conf->assoc) {
3496 ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
3497 "Bss Info ASSOC %d, bssid: %pM\n",
3498 bss_conf->aid, common->curbssid);
3499 common->curaid = bss_conf->aid;
3500 ath5k_hw_set_associd(ah);
3501 /* Once ANI is available you would start it here */
3505 if (changes & BSS_CHANGED_BEACON) {
3506 spin_lock_irqsave(&sc->block, flags);
3507 ath5k_beacon_update(hw, vif);
3508 spin_unlock_irqrestore(&sc->block, flags);
3511 if (changes & BSS_CHANGED_BEACON_ENABLED)
3512 sc->enable_beacon = bss_conf->enable_beacon;
3514 if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
3515 BSS_CHANGED_BEACON_INT))
3516 ath5k_beacon_config(sc);
3519 mutex_unlock(&sc->lock);
3522 static void ath5k_sw_scan_start(struct ieee80211_hw *hw)
3524 struct ath5k_softc *sc = hw->priv;
3526 ath5k_hw_set_ledstate(sc->ah, AR5K_LED_SCAN);
3529 static void ath5k_sw_scan_complete(struct ieee80211_hw *hw)
3531 struct ath5k_softc *sc = hw->priv;
3532 ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
3533 AR5K_LED_ASSOC : AR5K_LED_INIT);
3537 * ath5k_set_coverage_class - Set IEEE 802.11 coverage class
3539 * @hw: struct ieee80211_hw pointer
3540 * @coverage_class: IEEE 802.11 coverage class number
3542 * Mac80211 callback. Sets slot time, ACK timeout and CTS timeout for given
3543 * coverage class. The values are persistent, they are restored after device
3546 static void ath5k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
3548 struct ath5k_softc *sc = hw->priv;
3550 mutex_lock(&sc->lock);
3551 ath5k_hw_set_coverage_class(sc->ah, coverage_class);
3552 mutex_unlock(&sc->lock);