drivers/net/wireless/ath/ath9k/main.c

   1 /*
   2  * Copyright (c) 2008-2009 Atheros Communications Inc.
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/nl80211.h>
  18 #include "ath9k.h"
  19 #include "btcoex.h"
  20
  21 static void ath_cache_conf_rate(struct ath_softc *sc,
  22                                 struct ieee80211_conf *conf)
  23 {
  24         switch (conf->channel->band) {
  25         case IEEE80211_BAND_2GHZ:
  26                 if (conf_is_ht20(conf))
  27                         sc->cur_rate_mode = ATH9K_MODE_11NG_HT20;
  28                 else if (conf_is_ht40_minus(conf))
  29                         sc->cur_rate_mode = ATH9K_MODE_11NG_HT40MINUS;
  30                 else if (conf_is_ht40_plus(conf))
  31                         sc->cur_rate_mode = ATH9K_MODE_11NG_HT40PLUS;
  32                 else
  33                         sc->cur_rate_mode = ATH9K_MODE_11G;
  34                 break;
  35         case IEEE80211_BAND_5GHZ:
  36                 if (conf_is_ht20(conf))
  37                         sc->cur_rate_mode = ATH9K_MODE_11NA_HT20;
  38                 else if (conf_is_ht40_minus(conf))
  39                         sc->cur_rate_mode = ATH9K_MODE_11NA_HT40MINUS;
  40                 else if (conf_is_ht40_plus(conf))
  41                         sc->cur_rate_mode = ATH9K_MODE_11NA_HT40PLUS;
  42                 else
  43                         sc->cur_rate_mode = ATH9K_MODE_11A;
  44                 break;
  45         default:
  46                 BUG_ON(1);
  47                 break;
  48         }
  49 }
  50
  51 static void ath_update_txpow(struct ath_softc *sc)
  52 {
  53         struct ath_hw *ah = sc->sc_ah;
  54
  55         if (sc->curtxpow != sc->config.txpowlimit) {
  56                 ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit);
  57                 /* read back in case value is clamped */
  58                 sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit;
  59         }
  60 }
  61
  62 static u8 parse_mpdudensity(u8 mpdudensity)
  63 {
  64         /*
  65          * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing":
  66          *   0 for no restriction
  67          *   1 for 1/4 us
  68          *   2 for 1/2 us
  69          *   3 for 1 us
  70          *   4 for 2 us
  71          *   5 for 4 us
  72          *   6 for 8 us
  73          *   7 for 16 us
  74          */
  75         switch (mpdudensity) {
  76         case 0:
  77                 return 0;
  78         case 1:
  79         case 2:
  80         case 3:
  81                 /* Our lower layer calculations limit our precision to
  82                    1 microsecond */
  83                 return 1;
  84         case 4:
  85                 return 2;
  86         case 5:
  87                 return 4;
  88         case 6:
  89                 return 8;
  90         case 7:
  91                 return 16;
  92         default:
  93                 return 0;
  94         }
  95 }
  96
  97 static struct ath9k_channel *ath_get_curchannel(struct ath_softc *sc,
  98                                                 struct ieee80211_hw *hw)
  99 {
 100         struct ieee80211_channel *curchan = hw->conf.channel;
 101         struct ath9k_channel *channel;
 102         u8 chan_idx;
 103
 104         chan_idx = curchan->hw_value;
 105         channel = &sc->sc_ah->channels[chan_idx];
 106         ath9k_update_ichannel(sc, hw, channel);
 107         return channel;
 108 }
 109
 110 bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
 111 {
 112         unsigned long flags;
 113         bool ret;
 114
 115         spin_lock_irqsave(&sc->sc_pm_lock, flags);
 116         ret = ath9k_hw_setpower(sc->sc_ah, mode);
 117         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 118
 119         return ret;
 120 }
 121
 122 void ath9k_ps_wakeup(struct ath_softc *sc)
 123 {
 124         unsigned long flags;
 125
 126         spin_lock_irqsave(&sc->sc_pm_lock, flags);
 127         if (++sc->ps_usecount != 1)
 128                 goto unlock;
 129
 130         ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
 131
 132  unlock:
 133         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 134 }
 135
 136 void ath9k_ps_restore(struct ath_softc *sc)
 137 {
 138         unsigned long flags;
 139
 140         spin_lock_irqsave(&sc->sc_pm_lock, flags);
 141         if (--sc->ps_usecount != 0)
 142                 goto unlock;
 143
 144         if (sc->ps_idle)
 145                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
 146         else if (sc->ps_enabled &&
 147                  !(sc->ps_flags & (PS_WAIT_FOR_BEACON |
 148                               PS_WAIT_FOR_CAB |
 149                               PS_WAIT_FOR_PSPOLL_DATA |
 150                               PS_WAIT_FOR_TX_ACK)))
 151                 ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
 152
 153  unlock:
 154         spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
 155 }
 156
 157 static void ath_start_ani(struct ath_common *common)
 158 {
 159         struct ath_hw *ah = common->ah;
 160         unsigned long timestamp = jiffies_to_msecs(jiffies);
 161         struct ath_softc *sc = (struct ath_softc *) common->priv;
 162
 163         if (!(sc->sc_flags & SC_OP_ANI_RUN))
 164                 return;
 165
 166         if (sc->sc_flags & SC_OP_OFFCHANNEL)
 167                 return;
 168
 169         common->ani.longcal_timer = timestamp;
 170         common->ani.shortcal_timer = timestamp;
 171         common->ani.checkani_timer = timestamp;
 172
 173         mod_timer(&common->ani.timer,
 174                   jiffies +
 175                         msecs_to_jiffies((u32)ah->config.ani_poll_interval));
 176 }
 177
 178 /*
 179  * Set/change channels.  If the channel is really being changed, it's done
 180  * by reseting the chip.  To accomplish this we must first cleanup any pending
 181  * DMA, then restart stuff.
 182 */
 183 int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw,
 184                     struct ath9k_channel *hchan)
 185 {
 186         struct ath_wiphy *aphy = hw->priv;
 187         struct ath_hw *ah = sc->sc_ah;
 188         struct ath_common *common = ath9k_hw_common(ah);
 189         struct ieee80211_conf *conf = &common->hw->conf;
 190         bool fastcc = true, stopped;
 191         struct ieee80211_channel *channel = hw->conf.channel;
 192         struct ath9k_hw_cal_data *caldata = NULL;
 193         int r;
 194
 195         if (sc->sc_flags & SC_OP_INVALID)
 196                 return -EIO;
 197
 198         del_timer_sync(&common->ani.timer);
 199         cancel_work_sync(&sc->paprd_work);
 200         cancel_work_sync(&sc->hw_check_work);
 201         cancel_delayed_work_sync(&sc->tx_complete_work);
 202
 203         ath9k_ps_wakeup(sc);
 204
 205         /*
 206          * This is only performed if the channel settings have
 207          * actually changed.
 208          *
 209          * To switch channels clear any pending DMA operations;
 210          * wait long enough for the RX fifo to drain, reset the
 211          * hardware at the new frequency, and then re-enable
 212          * the relevant bits of the h/w.
 213          */
 214         ath9k_hw_set_interrupts(ah, 0);
 215         ath_drain_all_txq(sc, false);
 216         stopped = ath_stoprecv(sc);
 217
 218         /* XXX: do not flush receive queue here. We don't want
 219          * to flush data frames already in queue because of
 220          * changing channel. */
 221
 222         if (!stopped || !(sc->sc_flags & SC_OP_OFFCHANNEL))
 223                 fastcc = false;
 224
 225         if (!(sc->sc_flags & SC_OP_OFFCHANNEL))
 226                 caldata = &aphy->caldata;
 227
 228         ath_print(common, ATH_DBG_CONFIG,
 229                   "(%u MHz) -> (%u MHz), conf_is_ht40: %d fastcc: %d\n",
 230                   sc->sc_ah->curchan->channel,
 231                   channel->center_freq, conf_is_ht40(conf),
 232                   fastcc);
 233
 234         spin_lock_bh(&sc->sc_resetlock);
 235
 236         r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
 237         if (r) {
 238                 ath_print(common, ATH_DBG_FATAL,
 239                           "Unable to reset channel (%u MHz), "
 240                           "reset status %d\n",
 241                           channel->center_freq, r);
 242                 spin_unlock_bh(&sc->sc_resetlock);
 243                 goto ps_restore;
 244         }
 245         spin_unlock_bh(&sc->sc_resetlock);
 246
 247         if (ath_startrecv(sc) != 0) {
 248                 ath_print(common, ATH_DBG_FATAL,
 249                           "Unable to restart recv logic\n");
 250                 r = -EIO;
 251                 goto ps_restore;
 252         }
 253
 254         ath_cache_conf_rate(sc, &hw->conf);
 255         ath_update_txpow(sc);
 256         ath9k_hw_set_interrupts(ah, ah->imask);
 257
 258         if (!(sc->sc_flags & (SC_OP_OFFCHANNEL | SC_OP_SCANNING))) {
 259                 ath_start_ani(common);
 260                 ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 261                 ath_beacon_config(sc, NULL);
 262         }
 263
 264  ps_restore:
 265         ath9k_ps_restore(sc);
 266         return r;
 267 }
 268
 269 static void ath_paprd_activate(struct ath_softc *sc)
 270 {
 271         struct ath_hw *ah = sc->sc_ah;
 272         struct ath9k_hw_cal_data *caldata = ah->caldata;
 273         int chain;
 274
 275         if (!caldata || !caldata->paprd_done)
 276                 return;
 277
 278         ath9k_ps_wakeup(sc);
 279         ar9003_paprd_enable(ah, false);
 280         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 281                 if (!(ah->caps.tx_chainmask & BIT(chain)))
 282                         continue;
 283
 284                 ar9003_paprd_populate_single_table(ah, caldata, chain);
 285         }
 286
 287         ar9003_paprd_enable(ah, true);
 288         ath9k_ps_restore(sc);
 289 }
 290
 291 void ath_paprd_calibrate(struct work_struct *work)
 292 {
 293         struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work);
 294         struct ieee80211_hw *hw = sc->hw;
 295         struct ath_hw *ah = sc->sc_ah;
 296         struct ieee80211_hdr *hdr;
 297         struct sk_buff *skb = NULL;
 298         struct ieee80211_tx_info *tx_info;
 299         int band = hw->conf.channel->band;
 300         struct ieee80211_supported_band *sband = &sc->sbands[band];
 301         struct ath_tx_control txctl;
 302         struct ath9k_hw_cal_data *caldata = ah->caldata;
 303         int qnum, ftype;
 304         int chain_ok = 0;
 305         int chain;
 306         int len = 1800;
 307         int time_left;
 308         int i;
 309
 310         if (!caldata)
 311                 return;
 312
 313         skb = alloc_skb(len, GFP_KERNEL);
 314         if (!skb)
 315                 return;
 316
 317         tx_info = IEEE80211_SKB_CB(skb);
 318
 319         skb_put(skb, len);
 320         memset(skb->data, 0, len);
 321         hdr = (struct ieee80211_hdr *)skb->data;
 322         ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC;
 323         hdr->frame_control = cpu_to_le16(ftype);
 324         hdr->duration_id = cpu_to_le16(10);
 325         memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN);
 326         memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
 327         memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
 328
 329         memset(&txctl, 0, sizeof(txctl));
 330         qnum = sc->tx.hwq_map[WME_AC_BE];
 331         txctl.txq = &sc->tx.txq[qnum];
 332
 333         ath9k_ps_wakeup(sc);
 334         ar9003_paprd_init_table(ah);
 335         for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
 336                 if (!(ah->caps.tx_chainmask & BIT(chain)))
 337                         continue;
 338
 339                 chain_ok = 0;
 340                 memset(tx_info, 0, sizeof(*tx_info));
 341                 tx_info->band = band;
 342
 343                 for (i = 0; i < 4; i++) {
 344                         tx_info->control.rates[i].idx = sband->n_bitrates - 1;
 345                         tx_info->control.rates[i].count = 6;
 346                 }
 347
 348                 init_completion(&sc->paprd_complete);
 349                 ar9003_paprd_setup_gain_table(ah, chain);
 350                 txctl.paprd = BIT(chain);
 351                 if (ath_tx_start(hw, skb, &txctl) != 0)
 352                         break;
 353
 354                 time_left = wait_for_completion_timeout(&sc->paprd_complete,
 355                                 msecs_to_jiffies(ATH_PAPRD_TIMEOUT));
 356                 if (!time_left) {
 357                         ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
 358                                   "Timeout waiting for paprd training on "
 359                                   "TX chain %d\n",
 360                                   chain);
 361                         goto fail_paprd;
 362                 }
 363
 364                 if (!ar9003_paprd_is_done(ah))
 365                         break;
 366
 367                 if (ar9003_paprd_create_curve(ah, caldata, chain) != 0)
 368                         break;
 369
 370                 chain_ok = 1;
 371         }
 372         kfree_skb(skb);
 373
 374         if (chain_ok) {
 375                 caldata->paprd_done = true;
 376                 ath_paprd_activate(sc);
 377         }
 378
 379 fail_paprd:
 380         ath9k_ps_restore(sc);
 381 }
 382
 383 /*
 384  *  This routine performs the periodic noise floor calibration function
 385  *  that is used to adjust and optimize the chip performance.  This
 386  *  takes environmental changes (location, temperature) into account.
 387  *  When the task is complete, it reschedules itself depending on the
 388  *  appropriate interval that was calculated.
 389  */
 390 void ath_ani_calibrate(unsigned long data)
 391 {
 392         struct ath_softc *sc = (struct ath_softc *)data;
 393         struct ath_hw *ah = sc->sc_ah;
 394         struct ath_common *common = ath9k_hw_common(ah);
 395         bool longcal = false;
 396         bool shortcal = false;
 397         bool aniflag = false;
 398         unsigned int timestamp = jiffies_to_msecs(jiffies);
 399         u32 cal_interval, short_cal_interval, long_cal_interval;
 400
 401         if (ah->caldata && ah->caldata->nfcal_interference)
 402                 long_cal_interval = ATH_LONG_CALINTERVAL_INT;
 403         else
 404                 long_cal_interval = ATH_LONG_CALINTERVAL;
 405
 406         short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ?
 407                 ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL;
 408
 409         /* Only calibrate if awake */
 410         if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE)
 411                 goto set_timer;
 412
 413         ath9k_ps_wakeup(sc);
 414
 415         /* Long calibration runs independently of short calibration. */
 416         if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) {
 417                 longcal = true;
 418                 ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 419                 common->ani.longcal_timer = timestamp;
 420         }
 421
 422         /* Short calibration applies only while caldone is false */
 423         if (!common->ani.caldone) {
 424                 if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) {
 425                         shortcal = true;
 426                         ath_print(common, ATH_DBG_ANI,
 427                                   "shortcal @%lu\n", jiffies);
 428                         common->ani.shortcal_timer = timestamp;
 429                         common->ani.resetcal_timer = timestamp;
 430                 }
 431         } else {
 432                 if ((timestamp - common->ani.resetcal_timer) >=
 433                     ATH_RESTART_CALINTERVAL) {
 434                         common->ani.caldone = ath9k_hw_reset_calvalid(ah);
 435                         if (common->ani.caldone)
 436                                 common->ani.resetcal_timer = timestamp;
 437                 }
 438         }
 439
 440         /* Verify whether we must check ANI */
 441         if ((timestamp - common->ani.checkani_timer) >=
 442              ah->config.ani_poll_interval) {
 443                 aniflag = true;
 444                 common->ani.checkani_timer = timestamp;
 445         }
 446
 447         /* Skip all processing if there's nothing to do. */
 448         if (longcal || shortcal || aniflag) {
 449                 /* Call ANI routine if necessary */
 450                 if (aniflag)
 451                         ath9k_hw_ani_monitor(ah, ah->curchan);
 452
 453                 /* Perform calibration if necessary */
 454                 if (longcal || shortcal) {
 455                         common->ani.caldone =
 456                                 ath9k_hw_calibrate(ah,
 457                                                    ah->curchan,
 458                                                    common->rx_chainmask,
 459                                                    longcal);
 460
 461                         if (longcal)
 462                                 common->ani.noise_floor = ath9k_hw_getchan_noise(ah,
 463                                                                      ah->curchan);
 464
 465                         ath_print(common, ATH_DBG_ANI,
 466                                   " calibrate chan %u/%x nf: %d\n",
 467                                   ah->curchan->channel,
 468                                   ah->curchan->channelFlags,
 469                                   common->ani.noise_floor);
 470                 }
 471         }
 472
 473         ath9k_ps_restore(sc);
 474
 475 set_timer:
 476         /*
 477         * Set timer interval based on previous results.
 478         * The interval must be the shortest necessary to satisfy ANI,
 479         * short calibration and long calibration.
 480         */
 481         cal_interval = ATH_LONG_CALINTERVAL;
 482         if (sc->sc_ah->config.enable_ani)
 483                 cal_interval = min(cal_interval,
 484                                    (u32)ah->config.ani_poll_interval);
 485         if (!common->ani.caldone)
 486                 cal_interval = min(cal_interval, (u32)short_cal_interval);
 487
 488         mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
 489         if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
 490                 if (!ah->caldata->paprd_done)
 491                         ieee80211_queue_work(sc->hw, &sc->paprd_work);
 492                 else
 493                         ath_paprd_activate(sc);
 494         }
 495 }
 496
 497 /*
 498  * Update tx/rx chainmask. For legacy association,
 499  * hard code chainmask to 1x1, for 11n association, use
 500  * the chainmask configuration, for bt coexistence, use
 501  * the chainmask configuration even in legacy mode.
 502  */
 503 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 504 {
 505         struct ath_hw *ah = sc->sc_ah;
 506         struct ath_common *common = ath9k_hw_common(ah);
 507
 508         if ((sc->sc_flags & SC_OP_OFFCHANNEL) || is_ht ||
 509             (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
 510                 common->tx_chainmask = ah->caps.tx_chainmask;
 511                 common->rx_chainmask = ah->caps.rx_chainmask;
 512         } else {
 513                 common->tx_chainmask = 1;
 514                 common->rx_chainmask = 1;
 515         }
 516
 517         ath_print(common, ATH_DBG_CONFIG,
 518                   "tx chmask: %d, rx chmask: %d\n",
 519                   common->tx_chainmask,
 520                   common->rx_chainmask);
 521 }
 522
 523 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
 524 {
 525         struct ath_node *an;
 526
 527         an = (struct ath_node *)sta->drv_priv;
 528
 529         if (sc->sc_flags & SC_OP_TXAGGR) {
 530                 ath_tx_node_init(sc, an);
 531                 an->maxampdu = 1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 532                                      sta->ht_cap.ampdu_factor);
 533                 an->mpdudensity = parse_mpdudensity(sta->ht_cap.ampdu_density);
 534                 an->last_rssi = ATH_RSSI_DUMMY_MARKER;
 535         }
 536 }
 537
 538 static void ath_node_detach(struct ath_softc *sc, struct ieee80211_sta *sta)
 539 {
 540         struct ath_node *an = (struct ath_node *)sta->drv_priv;
 541
 542         if (sc->sc_flags & SC_OP_TXAGGR)
 543                 ath_tx_node_cleanup(sc, an);
 544 }
 545
 546 void ath_hw_check(struct work_struct *work)
 547 {
 548         struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work);
 549         int i;
 550
 551         ath9k_ps_wakeup(sc);
 552
 553         for (i = 0; i < 3; i++) {
 554                 if (ath9k_hw_check_alive(sc->sc_ah))
 555                         goto out;
 556
 557                 msleep(1);
 558         }
 559         ath_reset(sc, false);
 560
 561 out:
 562         ath9k_ps_restore(sc);
 563 }
 564
 565 void ath9k_tasklet(unsigned long data)
 566 {
 567         struct ath_softc *sc = (struct ath_softc *)data;
 568         struct ath_hw *ah = sc->sc_ah;
 569         struct ath_common *common = ath9k_hw_common(ah);
 570
 571         u32 status = sc->intrstatus;
 572         u32 rxmask;
 573
 574         ath9k_ps_wakeup(sc);
 575
 576         if (status & ATH9K_INT_FATAL) {
 577                 ath_reset(sc, false);
 578                 ath9k_ps_restore(sc);
 579                 return;
 580         }
 581
 582         if (!ath9k_hw_check_alive(ah))
 583                 ieee80211_queue_work(sc->hw, &sc->hw_check_work);
 584
 585         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 586                 rxmask = (ATH9K_INT_RXHP | ATH9K_INT_RXLP | ATH9K_INT_RXEOL |
 587                           ATH9K_INT_RXORN);
 588         else
 589                 rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 590
 591         if (status & rxmask) {
 592                 spin_lock_bh(&sc->rx.rxflushlock);
 593
 594                 /* Check for high priority Rx first */
 595                 if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
 596                     (status & ATH9K_INT_RXHP))
 597                         ath_rx_tasklet(sc, 0, true);
 598
 599                 ath_rx_tasklet(sc, 0, false);
 600                 spin_unlock_bh(&sc->rx.rxflushlock);
 601         }
 602
 603         if (status & ATH9K_INT_TX) {
 604                 if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
 605                         ath_tx_edma_tasklet(sc);
 606                 else
 607                         ath_tx_tasklet(sc);
 608         }
 609
 610         if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
 611                 /*
 612                  * TSF sync does not look correct; remain awake to sync with
 613                  * the next Beacon.
 614                  */
 615                 ath_print(common, ATH_DBG_PS,
 616                           "TSFOOR - Sync with next Beacon\n");
 617                 sc->ps_flags |= PS_WAIT_FOR_BEACON | PS_BEACON_SYNC;
 618         }
 619
 620         if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 621                 if (status & ATH9K_INT_GENTIMER)
 622                         ath_gen_timer_isr(sc->sc_ah);
 623
 624         /* re-enable hardware interrupt */
 625         ath9k_hw_set_interrupts(ah, ah->imask);
 626         ath9k_ps_restore(sc);
 627 }
 628
 629 irqreturn_t ath_isr(int irq, void *dev)
 630 {
 631 #define SCHED_INTR (                            \
 632                 ATH9K_INT_FATAL |               \
 633                 ATH9K_INT_RXORN |               \
 634                 ATH9K_INT_RXEOL |               \
 635                 ATH9K_INT_RX |                  \
 636                 ATH9K_INT_RXLP |                \
 637                 ATH9K_INT_RXHP |                \
 638                 ATH9K_INT_TX |                  \
 639                 ATH9K_INT_BMISS |               \
 640                 ATH9K_INT_CST |                 \
 641                 ATH9K_INT_TSFOOR |              \
 642                 ATH9K_INT_GENTIMER)
 643
 644         struct ath_softc *sc = dev;
 645         struct ath_hw *ah = sc->sc_ah;
 646         enum ath9k_int status;
 647         bool sched = false;
 648
 649         /*
 650          * The hardware is not ready/present, don't
 651          * touch anything. Note this can happen early
 652          * on if the IRQ is shared.
 653          */
 654         if (sc->sc_flags & SC_OP_INVALID)
 655                 return IRQ_NONE;
 656
 657
 658         /* shared irq, not for us */
 659
 660         if (!ath9k_hw_intrpend(ah))
 661                 return IRQ_NONE;
 662
 663         /*
 664          * Figure out the reason(s) for the interrupt.  Note
 665          * that the hal returns a pseudo-ISR that may include
 666          * bits we haven't explicitly enabled so we mask the
 667          * value to insure we only process bits we requested.
 668          */
 669         ath9k_hw_getisr(ah, &status);   /* NB: clears ISR too */
 670         status &= ah->imask;    /* discard unasked-for bits */
 671
 672         /*
 673          * If there are no status bits set, then this interrupt was not
 674          * for me (should have been caught above).
 675          */
 676         if (!status)
 677                 return IRQ_NONE;
 678
 679         /* Cache the status */
 680         sc->intrstatus = status;
 681
 682         if (status & SCHED_INTR)
 683                 sched = true;
 684
 685         /*
 686          * If a FATAL or RXORN interrupt is received, we have to reset the
 687          * chip immediately.
 688          */
 689         if ((status & ATH9K_INT_FATAL) || ((status & ATH9K_INT_RXORN) &&
 690             !(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)))
 691                 goto chip_reset;
 692
 693         if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
 694             (status & ATH9K_INT_BB_WATCHDOG)) {
 695                 ar9003_hw_bb_watchdog_dbg_info(ah);
 696                 goto chip_reset;
 697         }
 698
 699         if (status & ATH9K_INT_SWBA)
 700                 tasklet_schedule(&sc->bcon_tasklet);
 701
 702         if (status & ATH9K_INT_TXURN)
 703                 ath9k_hw_updatetxtriglevel(ah, true);
 704
 705         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
 706                 if (status & ATH9K_INT_RXEOL) {
 707                         ah->imask &= ~(ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
 708                         ath9k_hw_set_interrupts(ah, ah->imask);
 709                 }
 710         }
 711
 712         if (status & ATH9K_INT_MIB) {
 713                 /*
 714                  * Disable interrupts until we service the MIB
 715                  * interrupt; otherwise it will continue to
 716                  * fire.
 717                  */
 718                 ath9k_hw_set_interrupts(ah, 0);
 719                 /*
 720                  * Let the hal handle the event. We assume
 721                  * it will clear whatever condition caused
 722                  * the interrupt.
 723                  */
 724                 ath9k_hw_procmibevent(ah);
 725                 ath9k_hw_set_interrupts(ah, ah->imask);
 726         }
 727
 728         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 729                 if (status & ATH9K_INT_TIM_TIMER) {
 730                         /* Clear RxAbort bit so that we can
 731                          * receive frames */
 732                         ath9k_setpower(sc, ATH9K_PM_AWAKE);
 733                         ath9k_hw_setrxabort(sc->sc_ah, 0);
 734                         sc->ps_flags |= PS_WAIT_FOR_BEACON;
 735                 }
 736
 737 chip_reset:
 738
 739         ath_debug_stat_interrupt(sc, status);
 740
 741         if (sched) {
 742                 /* turn off every interrupt except SWBA */
 743                 ath9k_hw_set_interrupts(ah, (ah->imask & ATH9K_INT_SWBA));
 744                 tasklet_schedule(&sc->intr_tq);
 745         }
 746
 747         return IRQ_HANDLED;
 748
 749 #undef SCHED_INTR
 750 }
 751
 752 static u32 ath_get_extchanmode(struct ath_softc *sc,
 753                                struct ieee80211_channel *chan,
 754                                enum nl80211_channel_type channel_type)
 755 {
 756         u32 chanmode = 0;
 757
 758         switch (chan->band) {
 759         case IEEE80211_BAND_2GHZ:
 760                 switch(channel_type) {
 761                 case NL80211_CHAN_NO_HT:
 762                 case NL80211_CHAN_HT20:
 763                         chanmode = CHANNEL_G_HT20;
 764                         break;
 765                 case NL80211_CHAN_HT40PLUS:
 766                         chanmode = CHANNEL_G_HT40PLUS;
 767                         break;
 768                 case NL80211_CHAN_HT40MINUS:
 769                         chanmode = CHANNEL_G_HT40MINUS;
 770                         break;
 771                 }
 772                 break;
 773         case IEEE80211_BAND_5GHZ:
 774                 switch(channel_type) {
 775                 case NL80211_CHAN_NO_HT:
 776                 case NL80211_CHAN_HT20:
 777                         chanmode = CHANNEL_A_HT20;
 778                         break;
 779                 case NL80211_CHAN_HT40PLUS:
 780                         chanmode = CHANNEL_A_HT40PLUS;
 781                         break;
 782                 case NL80211_CHAN_HT40MINUS:
 783                         chanmode = CHANNEL_A_HT40MINUS;
 784                         break;
 785                 }
 786                 break;
 787         default:
 788                 break;
 789         }
 790
 791         return chanmode;
 792 }
 793
 794 static void ath9k_bss_assoc_info(struct ath_softc *sc,
 795                                  struct ieee80211_vif *vif,
 796                                  struct ieee80211_bss_conf *bss_conf)
 797 {
 798         struct ath_hw *ah = sc->sc_ah;
 799         struct ath_common *common = ath9k_hw_common(ah);
 800
 801         if (bss_conf->assoc) {
 802                 ath_print(common, ATH_DBG_CONFIG,
 803                           "Bss Info ASSOC %d, bssid: %pM\n",
 804                            bss_conf->aid, common->curbssid);
 805
 806                 /* New association, store aid */
 807                 common->curaid = bss_conf->aid;
 808                 ath9k_hw_write_associd(ah);
 809
 810                 /*
 811                  * Request a re-configuration of Beacon related timers
 812                  * on the receipt of the first Beacon frame (i.e.,
 813                  * after time sync with the AP).
 814                  */
 815                 sc->ps_flags |= PS_BEACON_SYNC;
 816
 817                 /* Configure the beacon */
 818                 ath_beacon_config(sc, vif);
 819
 820                 /* Reset rssi stats */
 821                 sc->sc_ah->stats.avgbrssi = ATH_RSSI_DUMMY_MARKER;
 822
 823                 sc->sc_flags |= SC_OP_ANI_RUN;
 824                 ath_start_ani(common);
 825         } else {
 826                 ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
 827                 common->curaid = 0;
 828                 /* Stop ANI */
 829                 sc->sc_flags &= ~SC_OP_ANI_RUN;
 830                 del_timer_sync(&common->ani.timer);
 831         }
 832 }
 833
 834 void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
 835 {
 836         struct ath_hw *ah = sc->sc_ah;
 837         struct ath_common *common = ath9k_hw_common(ah);
 838         struct ieee80211_channel *channel = hw->conf.channel;
 839         int r;
 840
 841         ath9k_ps_wakeup(sc);
 842         ath9k_hw_configpcipowersave(ah, 0, 0);
 843
 844         if (!ah->curchan)
 845                 ah->curchan = ath_get_curchannel(sc, sc->hw);
 846
 847         spin_lock_bh(&sc->sc_resetlock);
 848         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 849         if (r) {
 850                 ath_print(common, ATH_DBG_FATAL,
 851                           "Unable to reset channel (%u MHz), "
 852                           "reset status %d\n",
 853                           channel->center_freq, r);
 854         }
 855         spin_unlock_bh(&sc->sc_resetlock);
 856
 857         ath_update_txpow(sc);
 858         if (ath_startrecv(sc) != 0) {
 859                 ath_print(common, ATH_DBG_FATAL,
 860                           "Unable to restart recv logic\n");
 861                 return;
 862         }
 863
 864         if (sc->sc_flags & SC_OP_BEACONS)
 865                 ath_beacon_config(sc, NULL);    /* restart beacons */
 866
 867         /* Re-Enable  interrupts */
 868         ath9k_hw_set_interrupts(ah, ah->imask);
 869
 870         /* Enable LED */
 871         ath9k_hw_cfg_output(ah, ah->led_pin,
 872                             AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 873         ath9k_hw_set_gpio(ah, ah->led_pin, 0);
 874
 875         ieee80211_wake_queues(hw);
 876         ath9k_ps_restore(sc);
 877 }
 878
 879 void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
 880 {
 881         struct ath_hw *ah = sc->sc_ah;
 882         struct ieee80211_channel *channel = hw->conf.channel;
 883         int r;
 884
 885         ath9k_ps_wakeup(sc);
 886         ieee80211_stop_queues(hw);
 887
 888         /*
 889          * Keep the LED on when the radio is disabled
 890          * during idle unassociated state.
 891          */
 892         if (!sc->ps_idle) {
 893                 ath9k_hw_set_gpio(ah, ah->led_pin, 1);
 894                 ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
 895         }
 896
 897         /* Disable interrupts */
 898         ath9k_hw_set_interrupts(ah, 0);
 899
 900         ath_drain_all_txq(sc, false);   /* clear pending tx frames */
 901         ath_stoprecv(sc);               /* turn off frame recv */
 902         ath_flushrecv(sc);              /* flush recv queue */
 903
 904         if (!ah->curchan)
 905                 ah->curchan = ath_get_curchannel(sc, hw);
 906
 907         spin_lock_bh(&sc->sc_resetlock);
 908         r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
 909         if (r) {
 910                 ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
 911                           "Unable to reset channel (%u MHz), "
 912                           "reset status %d\n",
 913                           channel->center_freq, r);
 914         }
 915         spin_unlock_bh(&sc->sc_resetlock);
 916
 917         ath9k_hw_phy_disable(ah);
 918         ath9k_hw_configpcipowersave(ah, 1, 1);
 919         ath9k_ps_restore(sc);
 920         ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 921 }
 922
 923 int ath_reset(struct ath_softc *sc, bool retry_tx)
 924 {
 925         struct ath_hw *ah = sc->sc_ah;
 926         struct ath_common *common = ath9k_hw_common(ah);
 927         struct ieee80211_hw *hw = sc->hw;
 928         int r;
 929
 930         /* Stop ANI */
 931         del_timer_sync(&common->ani.timer);
 932
 933         ieee80211_stop_queues(hw);
 934
 935         ath9k_hw_set_interrupts(ah, 0);
 936         ath_drain_all_txq(sc, retry_tx);
 937         ath_stoprecv(sc);
 938         ath_flushrecv(sc);
 939
 940         spin_lock_bh(&sc->sc_resetlock);
 941         r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
 942         if (r)
 943                 ath_print(common, ATH_DBG_FATAL,
 944                           "Unable to reset hardware; reset status %d\n", r);
 945         spin_unlock_bh(&sc->sc_resetlock);
 946
 947         if (ath_startrecv(sc) != 0)
 948                 ath_print(common, ATH_DBG_FATAL,
 949                           "Unable to start recv logic\n");
 950
 951         /*
 952          * We may be doing a reset in response to a request
 953          * that changes the channel so update any state that
 954          * might change as a result.
 955          */
 956         ath_cache_conf_rate(sc, &hw->conf);
 957
 958         ath_update_txpow(sc);
 959
 960         if (sc->sc_flags & SC_OP_BEACONS)
 961                 ath_beacon_config(sc, NULL);    /* restart beacons */
 962
 963         ath9k_hw_set_interrupts(ah, ah->imask);
 964
 965         if (retry_tx) {
 966                 int i;
 967                 for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
 968                         if (ATH_TXQ_SETUP(sc, i)) {
 969                                 spin_lock_bh(&sc->tx.txq[i].axq_lock);
 970                                 ath_txq_schedule(sc, &sc->tx.txq[i]);
 971                                 spin_unlock_bh(&sc->tx.txq[i].axq_lock);
 972                         }
 973                 }
 974         }
 975
 976         ieee80211_wake_queues(hw);
 977
 978         /* Start ANI */
 979         ath_start_ani(common);
 980
 981         return r;
 982 }
 983
 984 static int ath_get_hal_qnum(u16 queue, struct ath_softc *sc)
 985 {
 986         int qnum;
 987
 988         switch (queue) {
 989         case 0:
 990                 qnum = sc->tx.hwq_map[WME_AC_VO];
 991                 break;
 992         case 1:
 993                 qnum = sc->tx.hwq_map[WME_AC_VI];
 994                 break;
 995         case 2:
 996                 qnum = sc->tx.hwq_map[WME_AC_BE];
 997                 break;
 998         case 3:
 999                 qnum = sc->tx.hwq_map[WME_AC_BK];
1000                 break;
1001         default:
1002                 qnum = sc->tx.hwq_map[WME_AC_BE];
1003                 break;
1004         }
1005
1006         return qnum;
1007 }
1008
1009 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc)
1010 {
1011         int qnum;
1012
1013         switch (queue) {
1014         case WME_AC_VO:
1015                 qnum = 0;
1016                 break;
1017         case WME_AC_VI:
1018                 qnum = 1;
1019                 break;
1020         case WME_AC_BE:
1021                 qnum = 2;
1022                 break;
1023         case WME_AC_BK:
1024                 qnum = 3;
1025                 break;
1026         default:
1027                 qnum = -1;
1028                 break;
1029         }
1030
1031         return qnum;
1032 }
1033
1034 /* XXX: Remove me once we don't depend on ath9k_channel for all
1035  * this redundant data */
1036 void ath9k_update_ichannel(struct ath_softc *sc, struct ieee80211_hw *hw,
1037                            struct ath9k_channel *ichan)
1038 {
1039         struct ieee80211_channel *chan = hw->conf.channel;
1040         struct ieee80211_conf *conf = &hw->conf;
1041
1042         ichan->channel = chan->center_freq;
1043         ichan->chan = chan;
1044
1045         if (chan->band == IEEE80211_BAND_2GHZ) {
1046                 ichan->chanmode = CHANNEL_G;
1047                 ichan->channelFlags = CHANNEL_2GHZ | CHANNEL_OFDM | CHANNEL_G;
1048         } else {
1049                 ichan->chanmode = CHANNEL_A;
1050                 ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
1051         }
1052
1053         if (conf_is_ht(conf))
1054                 ichan->chanmode = ath_get_extchanmode(sc, chan,
1055                                             conf->channel_type);
1056 }
1057
1058 /**********************/
1059 /* mac80211 callbacks */
1060 /**********************/
1061
1062 static int ath9k_start(struct ieee80211_hw *hw)
1063 {
1064         struct ath_wiphy *aphy = hw->priv;
1065         struct ath_softc *sc = aphy->sc;
1066         struct ath_hw *ah = sc->sc_ah;
1067         struct ath_common *common = ath9k_hw_common(ah);
1068         struct ieee80211_channel *curchan = hw->conf.channel;
1069         struct ath9k_channel *init_channel;
1070         int r;
1071
1072         ath_print(common, ATH_DBG_CONFIG,
1073                   "Starting driver with initial channel: %d MHz\n",
1074                   curchan->center_freq);
1075
1076         mutex_lock(&sc->mutex);
1077
1078         if (ath9k_wiphy_started(sc)) {
1079                 if (sc->chan_idx == curchan->hw_value) {
1080                         /*
1081                          * Already on the operational channel, the new wiphy
1082                          * can be marked active.
1083                          */
1084                         aphy->state = ATH_WIPHY_ACTIVE;
1085                         ieee80211_wake_queues(hw);
1086                 } else {
1087                         /*
1088                          * Another wiphy is on another channel, start the new
1089                          * wiphy in paused state.
1090                          */
1091                         aphy->state = ATH_WIPHY_PAUSED;
1092                         ieee80211_stop_queues(hw);
1093                 }
1094                 mutex_unlock(&sc->mutex);
1095                 return 0;
1096         }
1097         aphy->state = ATH_WIPHY_ACTIVE;
1098
1099         /* setup initial channel */
1100
1101         sc->chan_idx = curchan->hw_value;
1102
1103         init_channel = ath_get_curchannel(sc, hw);
1104
1105         /* Reset SERDES registers */
1106         ath9k_hw_configpcipowersave(ah, 0, 0);
1107
1108         /*
1109          * The basic interface to setting the hardware in a good
1110          * state is ``reset''.  On return the hardware is known to
1111          * be powered up and with interrupts disabled.  This must
1112          * be followed by initialization of the appropriate bits
1113          * and then setup of the interrupt mask.
1114          */
1115         spin_lock_bh(&sc->sc_resetlock);
1116         r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
1117         if (r) {
1118                 ath_print(common, ATH_DBG_FATAL,
1119                           "Unable to reset hardware; reset status %d "
1120                           "(freq %u MHz)\n", r,
1121                           curchan->center_freq);
1122                 spin_unlock_bh(&sc->sc_resetlock);
1123                 goto mutex_unlock;
1124         }
1125         spin_unlock_bh(&sc->sc_resetlock);
1126
1127         /*
1128          * This is needed only to setup initial state
1129          * but it's best done after a reset.
1130          */
1131         ath_update_txpow(sc);
1132
1133         /*
1134          * Setup the hardware after reset:
1135          * The receive engine is set going.
1136          * Frame transmit is handled entirely
1137          * in the frame output path; there's nothing to do
1138          * here except setup the interrupt mask.
1139          */
1140         if (ath_startrecv(sc) != 0) {
1141                 ath_print(common, ATH_DBG_FATAL,
1142                           "Unable to start recv logic\n");
1143                 r = -EIO;
1144                 goto mutex_unlock;
1145         }
1146
1147         /* Setup our intr mask. */
1148         ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
1149                     ATH9K_INT_RXORN | ATH9K_INT_FATAL |
1150                     ATH9K_INT_GLOBAL;
1151
1152         if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA)
1153                 ah->imask |= ATH9K_INT_RXHP |
1154                              ATH9K_INT_RXLP |
1155                              ATH9K_INT_BB_WATCHDOG;
1156         else
1157                 ah->imask |= ATH9K_INT_RX;
1158
1159         if (ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
1160                 ah->imask |= ATH9K_INT_GTT;
1161
1162         if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
1163                 ah->imask |= ATH9K_INT_CST;
1164
1165         ath_cache_conf_rate(sc, &hw->conf);
1166
1167         sc->sc_flags &= ~SC_OP_INVALID;
1168
1169         /* Disable BMISS interrupt when we're not associated */
1170         ah->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
1171         ath9k_hw_set_interrupts(ah, ah->imask);
1172
1173         ieee80211_wake_queues(hw);
1174
1175         ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
1176
1177         if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
1178             !ah->btcoex_hw.enabled) {
1179                 ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
1180                                            AR_STOMP_LOW_WLAN_WGHT);
1181                 ath9k_hw_btcoex_enable(ah);
1182
1183                 if (common->bus_ops->bt_coex_prep)
1184                         common->bus_ops->bt_coex_prep(common);
1185                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1186                         ath9k_btcoex_timer_resume(sc);
1187         }
1188
1189 mutex_unlock:
1190         mutex_unlock(&sc->mutex);
1191
1192         return r;
1193 }
1194
1195 static int ath9k_tx(struct ieee80211_hw *hw,
1196                     struct sk_buff *skb)
1197 {
1198         struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1199         struct ath_wiphy *aphy = hw->priv;
1200         struct ath_softc *sc = aphy->sc;
1201         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1202         struct ath_tx_control txctl;
1203         int padpos, padsize;
1204         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1205         int qnum;
1206
1207         if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
1208                 ath_print(common, ATH_DBG_XMIT,
1209                           "ath9k: %s: TX in unexpected wiphy state "
1210                           "%d\n", wiphy_name(hw->wiphy), aphy->state);
1211                 goto exit;
1212         }
1213
1214         if (sc->ps_enabled) {
1215                 /*
1216                  * mac80211 does not set PM field for normal data frames, so we
1217                  * need to update that based on the current PS mode.
1218                  */
1219                 if (ieee80211_is_data(hdr->frame_control) &&
1220                     !ieee80211_is_nullfunc(hdr->frame_control) &&
1221                     !ieee80211_has_pm(hdr->frame_control)) {
1222                         ath_print(common, ATH_DBG_PS, "Add PM=1 for a TX frame "
1223                                   "while in PS mode\n");
1224                         hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1225                 }
1226         }
1227
1228         if (unlikely(sc->sc_ah->power_mode != ATH9K_PM_AWAKE)) {
1229                 /*
1230                  * We are using PS-Poll and mac80211 can request TX while in
1231                  * power save mode. Need to wake up hardware for the TX to be
1232                  * completed and if needed, also for RX of buffered frames.
1233                  */
1234                 ath9k_ps_wakeup(sc);
1235                 if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
1236                         ath9k_hw_setrxabort(sc->sc_ah, 0);
1237                 if (ieee80211_is_pspoll(hdr->frame_control)) {
1238                         ath_print(common, ATH_DBG_PS,
1239                                   "Sending PS-Poll to pick a buffered frame\n");
1240                         sc->ps_flags |= PS_WAIT_FOR_PSPOLL_DATA;
1241                 } else {
1242                         ath_print(common, ATH_DBG_PS,
1243                                   "Wake up to complete TX\n");
1244                         sc->ps_flags |= PS_WAIT_FOR_TX_ACK;
1245                 }
1246                 /*
1247                  * The actual restore operation will happen only after
1248                  * the sc_flags bit is cleared. We are just dropping
1249                  * the ps_usecount here.
1250                  */
1251                 ath9k_ps_restore(sc);
1252         }
1253
1254         memset(&txctl, 0, sizeof(struct ath_tx_control));
1255
1256         /*
1257          * As a temporary workaround, assign seq# here; this will likely need
1258          * to be cleaned up to work better with Beacon transmission and virtual
1259          * BSSes.
1260          */
1261         if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
1262                 if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)
1263                         sc->tx.seq_no += 0x10;
1264                 hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
1265                 hdr->seq_ctrl |= cpu_to_le16(sc->tx.seq_no);
1266         }
1267
1268         /* Add the padding after the header if this is not already done */
1269         padpos = ath9k_cmn_padpos(hdr->frame_control);
1270         padsize = padpos & 3;
1271         if (padsize && skb->len>padpos) {
1272                 if (skb_headroom(skb) < padsize)
1273                         return -1;
1274                 skb_push(skb, padsize);
1275                 memmove(skb->data, skb->data + padsize, padpos);
1276         }
1277
1278         qnum = ath_get_hal_qnum(skb_get_queue_mapping(skb), sc);
1279         txctl.txq = &sc->tx.txq[qnum];
1280
1281         ath_print(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
1282
1283         if (ath_tx_start(hw, skb, &txctl) != 0) {
1284                 ath_print(common, ATH_DBG_XMIT, "TX failed\n");
1285                 goto exit;
1286         }
1287
1288         return 0;
1289 exit:
1290         dev_kfree_skb_any(skb);
1291         return 0;
1292 }
1293
1294 static void ath9k_stop(struct ieee80211_hw *hw)
1295 {
1296         struct ath_wiphy *aphy = hw->priv;
1297         struct ath_softc *sc = aphy->sc;
1298         struct ath_hw *ah = sc->sc_ah;
1299         struct ath_common *common = ath9k_hw_common(ah);
1300         int i;
1301
1302         mutex_lock(&sc->mutex);
1303
1304         aphy->state = ATH_WIPHY_INACTIVE;
1305
1306         if (led_blink)
1307                 cancel_delayed_work_sync(&sc->ath_led_blink_work);
1308
1309         cancel_delayed_work_sync(&sc->tx_complete_work);
1310         cancel_work_sync(&sc->paprd_work);
1311         cancel_work_sync(&sc->hw_check_work);
1312
1313         for (i = 0; i < sc->num_sec_wiphy; i++) {
1314                 if (sc->sec_wiphy[i])
1315                         break;
1316         }
1317
1318         if (i == sc->num_sec_wiphy) {
1319                 cancel_delayed_work_sync(&sc->wiphy_work);
1320                 cancel_work_sync(&sc->chan_work);
1321         }
1322
1323         if (sc->sc_flags & SC_OP_INVALID) {
1324                 ath_print(common, ATH_DBG_ANY, "Device not present\n");
1325                 mutex_unlock(&sc->mutex);
1326                 return;
1327         }
1328
1329         if (ath9k_wiphy_started(sc)) {
1330                 mutex_unlock(&sc->mutex);
1331                 return; /* another wiphy still in use */
1332         }
1333
1334         /* Ensure HW is awake when we try to shut it down. */
1335         ath9k_ps_wakeup(sc);
1336
1337         if (ah->btcoex_hw.enabled) {
1338                 ath9k_hw_btcoex_disable(ah);
1339                 if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
1340                         ath9k_btcoex_timer_pause(sc);
1341         }
1342
1343         /* make sure h/w will not generate any interrupt
1344          * before setting the invalid flag. */
1345         ath9k_hw_set_interrupts(ah, 0);
1346
1347         if (!(sc->sc_flags & SC_OP_INVALID)) {
1348                 ath_drain_all_txq(sc, false);
1349                 ath_stoprecv(sc);
1350                 ath9k_hw_phy_disable(ah);
1351         } else
1352                 sc->rx.rxlink = NULL;
1353
1354         /* disable HAL and put h/w to sleep */
1355         ath9k_hw_disable(ah);
1356         ath9k_hw_configpcipowersave(ah, 1, 1);
1357         ath9k_ps_restore(sc);
1358
1359         /* Finally, put the chip in FULL SLEEP mode */
1360         ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
1361
1362         sc->sc_flags |= SC_OP_INVALID;
1363
1364         mutex_unlock(&sc->mutex);
1365
1366         ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
1367 }
1368
1369 static int ath9k_add_interface(struct ieee80211_hw *hw,
1370                                struct ieee80211_vif *vif)
1371 {
1372         struct ath_wiphy *aphy = hw->priv;
1373         struct ath_softc *sc = aphy->sc;
1374         struct ath_hw *ah = sc->sc_ah;
1375         struct ath_common *common = ath9k_hw_common(ah);
1376         struct ath_vif *avp = (void *)vif->drv_priv;
1377         enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
1378         int ret = 0;
1379
1380         mutex_lock(&sc->mutex);
1381
1382         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK) &&
1383             sc->nvifs > 0) {
1384                 ret = -ENOBUFS;
1385                 goto out;
1386         }
1387
1388         switch (vif->type) {
1389         case NL80211_IFTYPE_STATION:
1390                 ic_opmode = NL80211_IFTYPE_STATION;
1391                 break;
1392         case NL80211_IFTYPE_ADHOC:
1393         case NL80211_IFTYPE_AP:
1394         case NL80211_IFTYPE_MESH_POINT:
1395                 if (sc->nbcnvifs >= ATH_BCBUF) {
1396                         ret = -ENOBUFS;
1397                         goto out;
1398                 }
1399                 ic_opmode = vif->type;
1400                 break;
1401         default:
1402                 ath_print(common, ATH_DBG_FATAL,
1403                         "Interface type %d not yet supported\n", vif->type);
1404                 ret = -EOPNOTSUPP;
1405                 goto out;
1406         }
1407
1408         ath_print(common, ATH_DBG_CONFIG,
1409                   "Attach a VIF of type: %d\n", ic_opmode);
1410
1411         /* Set the VIF opmode */
1412         avp->av_opmode = ic_opmode;
1413         avp->av_bslot = -1;
1414
1415         sc->nvifs++;
1416
1417         if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
1418                 ath9k_set_bssid_mask(hw);
1419
1420         if (sc->nvifs > 1)
1421                 goto out; /* skip global settings for secondary vif */
1422
1423         if (ic_opmode == NL80211_IFTYPE_AP) {
1424                 ath9k_hw_set_tsfadjust(ah, 1);
1425                 sc->sc_flags |= SC_OP_TSF_RESET;
1426         }
1427
1428         /* Set the device opmode */
1429         ah->opmode = ic_opmode;
1430
1431         /*
1432          * Enable MIB interrupts when there are hardware phy counters.
1433          * Note we only do this (at the moment) for station mode.
1434          */
1435         if ((vif->type == NL80211_IFTYPE_STATION) ||
1436             (vif->type == NL80211_IFTYPE_ADHOC) ||
1437             (vif->type == NL80211_IFTYPE_MESH_POINT)) {
1438                 if (ah->config.enable_ani)
1439                         ah->imask |= ATH9K_INT_MIB;
1440                 ah->imask |= ATH9K_INT_TSFOOR;
1441         }
1442
1443         ath9k_hw_set_interrupts(ah, ah->imask);
1444
1445         if (vif->type == NL80211_IFTYPE_AP    ||
1446             vif->type == NL80211_IFTYPE_ADHOC ||
1447             vif->type == NL80211_IFTYPE_MONITOR) {
1448                 sc->sc_flags |= SC_OP_ANI_RUN;
1449                 ath_start_ani(common);
1450         }
1451
1452 out:
1453         mutex_unlock(&sc->mutex);
1454         return ret;
1455 }
1456
1457 static void ath9k_remove_interface(struct ieee80211_hw *hw,
1458                                    struct ieee80211_vif *vif)
1459 {
1460         struct ath_wiphy *aphy = hw->priv;
1461         struct ath_softc *sc = aphy->sc;
1462         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1463         struct ath_vif *avp = (void *)vif->drv_priv;
1464         int i;
1465
1466         ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
1467
1468         mutex_lock(&sc->mutex);
1469
1470         /* Stop ANI */
1471         sc->sc_flags &= ~SC_OP_ANI_RUN;
1472         del_timer_sync(&common->ani.timer);
1473
1474         /* Reclaim beacon resources */
1475         if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
1476             (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
1477             (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
1478                 ath9k_ps_wakeup(sc);
1479                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1480                 ath9k_ps_restore(sc);
1481         }
1482
1483         ath_beacon_return(sc, avp);
1484         sc->sc_flags &= ~SC_OP_BEACONS;
1485
1486         for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
1487                 if (sc->beacon.bslot[i] == vif) {
1488                         printk(KERN_DEBUG "%s: vif had allocated beacon "
1489                                "slot\n", __func__);
1490                         sc->beacon.bslot[i] = NULL;
1491                         sc->beacon.bslot_aphy[i] = NULL;
1492                 }
1493         }
1494
1495         sc->nvifs--;
1496
1497         mutex_unlock(&sc->mutex);
1498 }
1499
1500 void ath9k_enable_ps(struct ath_softc *sc)
1501 {
1502         struct ath_hw *ah = sc->sc_ah;
1503
1504         sc->ps_enabled = true;
1505         if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP)) {
1506                 if ((ah->imask & ATH9K_INT_TIM_TIMER) == 0) {
1507                         ah->imask |= ATH9K_INT_TIM_TIMER;
1508                         ath9k_hw_set_interrupts(ah, ah->imask);
1509                 }
1510                 ath9k_hw_setrxabort(ah, 1);
1511         }
1512 }
1513
1514 static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
1515 {
1516         struct ath_wiphy *aphy = hw->priv;
1517         struct ath_softc *sc = aphy->sc;
1518         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1519         struct ieee80211_conf *conf = &hw->conf;
1520         struct ath_hw *ah = sc->sc_ah;
1521         bool disable_radio;
1522
1523         mutex_lock(&sc->mutex);
1524
1525         /*
1526          * Leave this as the first check because we need to turn on the
1527          * radio if it was disabled before prior to processing the rest
1528          * of the changes. Likewise we must only disable the radio towards
1529          * the end.
1530          */
1531         if (changed & IEEE80211_CONF_CHANGE_IDLE) {
1532                 bool enable_radio;
1533                 bool all_wiphys_idle;
1534                 bool idle = !!(conf->flags & IEEE80211_CONF_IDLE);
1535
1536                 spin_lock_bh(&sc->wiphy_lock);
1537                 all_wiphys_idle =  ath9k_all_wiphys_idle(sc);
1538                 ath9k_set_wiphy_idle(aphy, idle);
1539
1540                 enable_radio = (!idle && all_wiphys_idle);
1541
1542                 /*
1543                  * After we unlock here its possible another wiphy
1544                  * can be re-renabled so to account for that we will
1545                  * only disable the radio toward the end of this routine
1546                  * if by then all wiphys are still idle.
1547                  */
1548                 spin_unlock_bh(&sc->wiphy_lock);
1549
1550                 if (enable_radio) {
1551                         sc->ps_idle = false;
1552                         ath_radio_enable(sc, hw);
1553                         ath_print(common, ATH_DBG_CONFIG,
1554                                   "not-idle: enabling radio\n");
1555                 }
1556         }
1557
1558         /*
1559          * We just prepare to enable PS. We have to wait until our AP has
1560          * ACK'd our null data frame to disable RX otherwise we'll ignore
1561          * those ACKs and end up retransmitting the same null data frames.
1562          * IEEE80211_CONF_CHANGE_PS is only passed by mac80211 for STA mode.
1563          */
1564         if (changed & IEEE80211_CONF_CHANGE_PS) {
1565                 if (conf->flags & IEEE80211_CONF_PS) {
1566                         sc->ps_flags |= PS_ENABLED;
1567                         /*
1568                          * At this point we know hardware has received an ACK
1569                          * of a previously sent null data frame.
1570                          */
1571                         if ((sc->ps_flags & PS_NULLFUNC_COMPLETED)) {
1572                                 sc->ps_flags &= ~PS_NULLFUNC_COMPLETED;
1573                                 ath9k_enable_ps(sc);
1574                         }
1575                 } else {
1576                         sc->ps_enabled = false;
1577                         sc->ps_flags &= ~(PS_ENABLED |
1578                                           PS_NULLFUNC_COMPLETED);
1579                         ath9k_setpower(sc, ATH9K_PM_AWAKE);
1580                         if (!(ah->caps.hw_caps &
1581                               ATH9K_HW_CAP_AUTOSLEEP)) {
1582                                 ath9k_hw_setrxabort(sc->sc_ah, 0);
1583                                 sc->ps_flags &= ~(PS_WAIT_FOR_BEACON |
1584                                                   PS_WAIT_FOR_CAB |
1585                                                   PS_WAIT_FOR_PSPOLL_DATA |
1586                                                   PS_WAIT_FOR_TX_ACK);
1587                                 if (ah->imask & ATH9K_INT_TIM_TIMER) {
1588                                         ah->imask &= ~ATH9K_INT_TIM_TIMER;
1589                                         ath9k_hw_set_interrupts(sc->sc_ah,
1590                                                         ah->imask);
1591                                 }
1592                         }
1593                 }
1594         }
1595
1596         if (changed & IEEE80211_CONF_CHANGE_MONITOR) {
1597                 if (conf->flags & IEEE80211_CONF_MONITOR) {
1598                         ath_print(common, ATH_DBG_CONFIG,
1599                                   "HW opmode set to Monitor mode\n");
1600                         sc->sc_ah->opmode = NL80211_IFTYPE_MONITOR;
1601                 }
1602         }
1603
1604         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
1605                 struct ieee80211_channel *curchan = hw->conf.channel;
1606                 int pos = curchan->hw_value;
1607
1608                 aphy->chan_idx = pos;
1609                 aphy->chan_is_ht = conf_is_ht(conf);
1610                 if (hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
1611                         sc->sc_flags |= SC_OP_OFFCHANNEL;
1612                 else
1613                         sc->sc_flags &= ~SC_OP_OFFCHANNEL;
1614
1615                 if (aphy->state == ATH_WIPHY_SCAN ||
1616                     aphy->state == ATH_WIPHY_ACTIVE)
1617                         ath9k_wiphy_pause_all_forced(sc, aphy);
1618                 else {
1619                         /*
1620                          * Do not change operational channel based on a paused
1621                          * wiphy changes.
1622                          */
1623                         goto skip_chan_change;
1624                 }
1625
1626                 ath_print(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
1627                           curchan->center_freq);
1628
1629                 /* XXX: remove me eventualy */
1630                 ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
1631
1632                 ath_update_chainmask(sc, conf_is_ht(conf));
1633
1634                 if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
1635                         ath_print(common, ATH_DBG_FATAL,
1636                                   "Unable to set channel\n");
1637                         mutex_unlock(&sc->mutex);
1638                         return -EINVAL;
1639                 }
1640         }
1641
1642 skip_chan_change:
1643         if (changed & IEEE80211_CONF_CHANGE_POWER) {
1644                 sc->config.txpowlimit = 2 * conf->power_level;
1645                 ath_update_txpow(sc);
1646         }
1647
1648         spin_lock_bh(&sc->wiphy_lock);
1649         disable_radio = ath9k_all_wiphys_idle(sc);
1650         spin_unlock_bh(&sc->wiphy_lock);
1651
1652         if (disable_radio) {
1653                 ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
1654                 sc->ps_idle = true;
1655                 ath_radio_disable(sc, hw);
1656         }
1657
1658         mutex_unlock(&sc->mutex);
1659
1660         return 0;
1661 }
1662
1663 #define SUPPORTED_FILTERS                       \
1664         (FIF_PROMISC_IN_BSS |                   \
1665         FIF_ALLMULTI |                          \
1666         FIF_CONTROL |                           \
1667         FIF_PSPOLL |                            \
1668         FIF_OTHER_BSS |                         \
1669         FIF_BCN_PRBRESP_PROMISC |               \
1670         FIF_FCSFAIL)
1671
1672 /* FIXME: sc->sc_full_reset ? */
1673 static void ath9k_configure_filter(struct ieee80211_hw *hw,
1674                                    unsigned int changed_flags,
1675                                    unsigned int *total_flags,
1676                                    u64 multicast)
1677 {
1678         struct ath_wiphy *aphy = hw->priv;
1679         struct ath_softc *sc = aphy->sc;
1680         u32 rfilt;
1681
1682         changed_flags &= SUPPORTED_FILTERS;
1683         *total_flags &= SUPPORTED_FILTERS;
1684
1685         sc->rx.rxfilter = *total_flags;
1686         ath9k_ps_wakeup(sc);
1687         rfilt = ath_calcrxfilter(sc);
1688         ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
1689         ath9k_ps_restore(sc);
1690
1691         ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
1692                   "Set HW RX filter: 0x%x\n", rfilt);
1693 }
1694
1695 static int ath9k_sta_add(struct ieee80211_hw *hw,
1696                          struct ieee80211_vif *vif,
1697                          struct ieee80211_sta *sta)
1698 {
1699         struct ath_wiphy *aphy = hw->priv;
1700         struct ath_softc *sc = aphy->sc;
1701
1702         ath_node_attach(sc, sta);
1703
1704         return 0;
1705 }
1706
1707 static int ath9k_sta_remove(struct ieee80211_hw *hw,
1708                             struct ieee80211_vif *vif,
1709                             struct ieee80211_sta *sta)
1710 {
1711         struct ath_wiphy *aphy = hw->priv;
1712         struct ath_softc *sc = aphy->sc;
1713
1714         ath_node_detach(sc, sta);
1715
1716         return 0;
1717 }
1718
1719 static int ath9k_conf_tx(struct ieee80211_hw *hw, u16 queue,
1720                          const struct ieee80211_tx_queue_params *params)
1721 {
1722         struct ath_wiphy *aphy = hw->priv;
1723         struct ath_softc *sc = aphy->sc;
1724         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1725         struct ath9k_tx_queue_info qi;
1726         int ret = 0, qnum;
1727
1728         if (queue >= WME_NUM_AC)
1729                 return 0;
1730
1731         mutex_lock(&sc->mutex);
1732
1733         memset(&qi, 0, sizeof(struct ath9k_tx_queue_info));
1734
1735         qi.tqi_aifs = params->aifs;
1736         qi.tqi_cwmin = params->cw_min;
1737         qi.tqi_cwmax = params->cw_max;
1738         qi.tqi_burstTime = params->txop;
1739         qnum = ath_get_hal_qnum(queue, sc);
1740
1741         ath_print(common, ATH_DBG_CONFIG,
1742                   "Configure tx [queue/halq] [%d/%d],  "
1743                   "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
1744                   queue, qnum, params->aifs, params->cw_min,
1745                   params->cw_max, params->txop);
1746
1747         ret = ath_txq_update(sc, qnum, &qi);
1748         if (ret)
1749                 ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
1750
1751         if (sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC)
1752                 if ((qnum == sc->tx.hwq_map[WME_AC_BE]) && !ret)
1753                         ath_beaconq_config(sc);
1754
1755         mutex_unlock(&sc->mutex);
1756
1757         return ret;
1758 }
1759
1760 static int ath9k_set_key(struct ieee80211_hw *hw,
1761                          enum set_key_cmd cmd,
1762                          struct ieee80211_vif *vif,
1763                          struct ieee80211_sta *sta,
1764                          struct ieee80211_key_conf *key)
1765 {
1766         struct ath_wiphy *aphy = hw->priv;
1767         struct ath_softc *sc = aphy->sc;
1768         struct ath_common *common = ath9k_hw_common(sc->sc_ah);
1769         int ret = 0;
1770
1771         if (modparam_nohwcrypt)
1772                 return -ENOSPC;
1773
1774         mutex_lock(&sc->mutex);
1775         ath9k_ps_wakeup(sc);
1776         ath_print(common, ATH_DBG_CONFIG, "Set HW Key\n");
1777
1778         switch (cmd) {
1779         case SET_KEY:
1780                 ret = ath9k_cmn_key_config(common, vif, sta, key);
1781                 if (ret >= 0) {
1782                         key->hw_key_idx = ret;
1783                         /* push IV and Michael MIC generation to stack */
1784                         key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
1785                         if (key->cipher == WLAN_CIPHER_SUITE_TKIP)
1786                                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
1787                         if (sc->sc_ah->sw_mgmt_crypto &&
1788                             key->cipher == WLAN_CIPHER_SUITE_CCMP)
1789                                 key->flags |= IEEE80211_KEY_FLAG_SW_MGMT;
1790                         ret = 0;
1791                 }
1792                 break;
1793         case DISABLE_KEY:
1794                 ath9k_cmn_key_delete(common, key);
1795                 break;
1796         default:
1797                 ret = -EINVAL;
1798         }
1799
1800         ath9k_ps_restore(sc);
1801         mutex_unlock(&sc->mutex);
1802
1803         return ret;
1804 }
1805
1806 static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
1807                                    struct ieee80211_vif *vif,
1808                                    struct ieee80211_bss_conf *bss_conf,
1809                                    u32 changed)
1810 {
1811         struct ath_wiphy *aphy = hw->priv;
1812         struct ath_softc *sc = aphy->sc;
1813         struct ath_hw *ah = sc->sc_ah;
1814         struct ath_common *common = ath9k_hw_common(ah);
1815         struct ath_vif *avp = (void *)vif->drv_priv;
1816         int slottime;
1817         int error;
1818
1819         mutex_lock(&sc->mutex);
1820
1821         if (changed & BSS_CHANGED_BSSID) {
1822                 /* Set BSSID */
1823                 memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
1824                 memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
1825                 common->curaid = 0;
1826                 ath9k_hw_write_associd(ah);
1827
1828                 /* Set aggregation protection mode parameters */
1829                 sc->config.ath_aggr_prot = 0;
1830
1831                 /* Only legacy IBSS for now */
1832                 if (vif->type == NL80211_IFTYPE_ADHOC)
1833                         ath_update_chainmask(sc, 0);
1834
1835                 ath_print(common, ATH_DBG_CONFIG,
1836                           "BSSID: %pM aid: 0x%x\n",
1837                           common->curbssid, common->curaid);
1838
1839                 /* need to reconfigure the beacon */
1840                 sc->sc_flags &= ~SC_OP_BEACONS ;
1841         }
1842
1843         /* Enable transmission of beacons (AP, IBSS, MESH) */
1844         if ((changed & BSS_CHANGED_BEACON) ||
1845             ((changed & BSS_CHANGED_BEACON_ENABLED) && bss_conf->enable_beacon)) {
1846                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1847                 error = ath_beacon_alloc(aphy, vif);
1848                 if (!error)
1849                         ath_beacon_config(sc, vif);
1850         }
1851
1852         if (changed & BSS_CHANGED_ERP_SLOT) {
1853                 if (bss_conf->use_short_slot)
1854                         slottime = 9;
1855                 else
1856                         slottime = 20;
1857                 if (vif->type == NL80211_IFTYPE_AP) {
1858                         /*
1859                          * Defer update, so that connected stations can adjust
1860                          * their settings at the same time.
1861                          * See beacon.c for more details
1862                          */
1863                         sc->beacon.slottime = slottime;
1864                         sc->beacon.updateslot = UPDATE;
1865                 } else {
1866                         ah->slottime = slottime;
1867                         ath9k_hw_init_global_settings(ah);
1868                 }
1869         }
1870
1871         /* Disable transmission of beacons */
1872         if ((changed & BSS_CHANGED_BEACON_ENABLED) && !bss_conf->enable_beacon)
1873                 ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1874
1875         if (changed & BSS_CHANGED_BEACON_INT) {
1876                 sc->beacon_interval = bss_conf->beacon_int;
1877                 /*
1878                  * In case of AP mode, the HW TSF has to be reset
1879                  * when the beacon interval changes.
1880                  */
1881                 if (vif->type == NL80211_IFTYPE_AP) {
1882                         sc->sc_flags |= SC_OP_TSF_RESET;
1883                         ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
1884                         error = ath_beacon_alloc(aphy, vif);
1885                         if (!error)
1886                                 ath_beacon_config(sc, vif);
1887                 } else {
1888                         ath_beacon_config(sc, vif);
1889                 }
1890         }
1891
1892         if (changed & BSS_CHANGED_ERP_PREAMBLE) {
1893                 ath_print(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
1894                           bss_conf->use_short_preamble);
1895                 if (bss_conf->use_short_preamble)
1896                         sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
1897                 else
1898                         sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT;
1899         }
1900
1901         if (changed & BSS_CHANGED_ERP_CTS_PROT) {
1902                 ath_print(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
1903                           bss_conf->use_cts_prot);
1904                 if (bss_conf->use_cts_prot &&
1905                     hw->conf.channel->band != IEEE80211_BAND_5GHZ)
1906                         sc->sc_flags |= SC_OP_PROTECT_ENABLE;
1907                 else
1908                         sc->sc_flags &= ~SC_OP_PROTECT_ENABLE;
1909         }
1910
1911         if (changed & BSS_CHANGED_ASSOC) {
1912                 ath_print(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
1913                         bss_conf->assoc);
1914                 ath9k_bss_assoc_info(sc, vif, bss_conf);
1915         }
1916
1917         mutex_unlock(&sc->mutex);
1918 }
1919
1920 static u64 ath9k_get_tsf(struct ieee80211_hw *hw)
1921 {
1922         u64 tsf;
1923         struct ath_wiphy *aphy = hw->priv;
1924         struct ath_softc *sc = aphy->sc;
1925
1926         mutex_lock(&sc->mutex);
1927         tsf = ath9k_hw_gettsf64(sc->sc_ah);
1928         mutex_unlock(&sc->mutex);
1929
1930         return tsf;
1931 }
1932
1933 static void ath9k_set_tsf(struct ieee80211_hw *hw, u64 tsf)
1934 {
1935         struct ath_wiphy *aphy = hw->priv;
1936         struct ath_softc *sc = aphy->sc;
1937
1938         mutex_lock(&sc->mutex);
1939         ath9k_hw_settsf64(sc->sc_ah, tsf);
1940         mutex_unlock(&sc->mutex);
1941 }
1942
1943 static void ath9k_reset_tsf(struct ieee80211_hw *hw)
1944 {
1945         struct ath_wiphy *aphy = hw->priv;
1946         struct ath_softc *sc = aphy->sc;
1947
1948         mutex_lock(&sc->mutex);
1949
1950         ath9k_ps_wakeup(sc);
1951         ath9k_hw_reset_tsf(sc->sc_ah);
1952         ath9k_ps_restore(sc);
1953
1954         mutex_unlock(&sc->mutex);
1955 }
1956
1957 static int ath9k_ampdu_action(struct ieee80211_hw *hw,
1958                               struct ieee80211_vif *vif,
1959                               enum ieee80211_ampdu_mlme_action action,
1960                               struct ieee80211_sta *sta,
1961                               u16 tid, u16 *ssn)
1962 {
1963         struct ath_wiphy *aphy = hw->priv;
1964         struct ath_softc *sc = aphy->sc;
1965         int ret = 0;
1966
1967         local_bh_disable();
1968
1969         switch (action) {
1970         case IEEE80211_AMPDU_RX_START:
1971                 if (!(sc->sc_flags & SC_OP_RXAGGR))
1972                         ret = -ENOTSUPP;
1973                 break;
1974         case IEEE80211_AMPDU_RX_STOP:
1975                 break;
1976         case IEEE80211_AMPDU_TX_START:
1977                 ath9k_ps_wakeup(sc);
1978                 ath_tx_aggr_start(sc, sta, tid, ssn);
1979                 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
1980                 ath9k_ps_restore(sc);
1981                 break;
1982         case IEEE80211_AMPDU_TX_STOP:
1983                 ath9k_ps_wakeup(sc);
1984                 ath_tx_aggr_stop(sc, sta, tid);
1985                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
1986                 ath9k_ps_restore(sc);
1987                 break;
1988         case IEEE80211_AMPDU_TX_OPERATIONAL:
1989                 ath9k_ps_wakeup(sc);
1990                 ath_tx_aggr_resume(sc, sta, tid);
1991                 ath9k_ps_restore(sc);
1992                 break;
1993         default:
1994                 ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
1995                           "Unknown AMPDU action\n");
1996         }
1997
1998         local_bh_enable();
1999
2000         return ret;
2001 }
2002
2003 static int ath9k_get_survey(struct ieee80211_hw *hw, int idx,
2004                              struct survey_info *survey)
2005 {
2006         struct ath_wiphy *aphy = hw->priv;
2007         struct ath_softc *sc = aphy->sc;
2008         struct ath_hw *ah = sc->sc_ah;
2009         struct ath_common *common = ath9k_hw_common(ah);
2010         struct ieee80211_conf *conf = &hw->conf;
2011
2012          if (idx != 0)
2013                 return -ENOENT;
2014
2015         survey->channel = conf->channel;
2016         survey->filled = SURVEY_INFO_NOISE_DBM;
2017         survey->noise = common->ani.noise_floor;
2018
2019         return 0;
2020 }
2021
2022 static void ath9k_sw_scan_start(struct ieee80211_hw *hw)
2023 {
2024         struct ath_wiphy *aphy = hw->priv;
2025         struct ath_softc *sc = aphy->sc;
2026
2027         mutex_lock(&sc->mutex);
2028         if (ath9k_wiphy_scanning(sc)) {
2029                 /*
2030                  * There is a race here in mac80211 but fixing it requires
2031                  * we revisit how we handle the scan complete callback.
2032                  * After mac80211 fixes we will not have configured hardware
2033                  * to the home channel nor would we have configured the RX
2034                  * filter yet.
2035                  */
2036                 mutex_unlock(&sc->mutex);
2037                 return;
2038         }
2039
2040         aphy->state = ATH_WIPHY_SCAN;
2041         ath9k_wiphy_pause_all_forced(sc, aphy);
2042         sc->sc_flags |= SC_OP_SCANNING;
2043         mutex_unlock(&sc->mutex);
2044 }
2045
2046 /*
2047  * XXX: this requires a revisit after the driver
2048  * scan_complete gets moved to another place/removed in mac80211.
2049  */
2050 static void ath9k_sw_scan_complete(struct ieee80211_hw *hw)
2051 {
2052         struct ath_wiphy *aphy = hw->priv;
2053         struct ath_softc *sc = aphy->sc;
2054
2055         mutex_lock(&sc->mutex);
2056         aphy->state = ATH_WIPHY_ACTIVE;
2057         sc->sc_flags &= ~SC_OP_SCANNING;
2058         mutex_unlock(&sc->mutex);
2059 }
2060
2061 static void ath9k_set_coverage_class(struct ieee80211_hw *hw, u8 coverage_class)
2062 {
2063         struct ath_wiphy *aphy = hw->priv;
2064         struct ath_softc *sc = aphy->sc;
2065         struct ath_hw *ah = sc->sc_ah;
2066
2067         mutex_lock(&sc->mutex);
2068         ah->coverage_class = coverage_class;
2069         ath9k_hw_init_global_settings(ah);
2070         mutex_unlock(&sc->mutex);
2071 }
2072
2073 struct ieee80211_ops ath9k_ops = {
2074         .tx                 = ath9k_tx,
2075         .start              = ath9k_start,
2076         .stop               = ath9k_stop,
2077         .add_interface      = ath9k_add_interface,
2078         .remove_interface   = ath9k_remove_interface,
2079         .config             = ath9k_config,
2080         .configure_filter   = ath9k_configure_filter,
2081         .sta_add            = ath9k_sta_add,
2082         .sta_remove         = ath9k_sta_remove,
2083         .conf_tx            = ath9k_conf_tx,
2084         .bss_info_changed   = ath9k_bss_info_changed,
2085         .set_key            = ath9k_set_key,
2086         .get_tsf            = ath9k_get_tsf,
2087         .set_tsf            = ath9k_set_tsf,
2088         .reset_tsf          = ath9k_reset_tsf,
2089         .ampdu_action       = ath9k_ampdu_action,
2090         .get_survey         = ath9k_get_survey,
2091         .sw_scan_start      = ath9k_sw_scan_start,
2092         .sw_scan_complete   = ath9k_sw_scan_complete,
2093         .rfkill_poll        = ath9k_rfkill_poll_state,
2094         .set_coverage_class = ath9k_set_coverage_class,
2095 };