]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/wireless/ath/wil6210/cfg80211.c
Merge branch 'for-3.12/upstream' into for-next
[karo-tx-linux.git] / drivers / net / wireless / ath / wil6210 / cfg80211.c
1 /*
2  * Copyright (c) 2012 Qualcomm Atheros, Inc.
3  *
4  * Permission to use, copy, modify, and/or distribute this software for any
5  * purpose with or without fee is hereby granted, provided that the above
6  * copyright notice and this permission notice appear in all copies.
7  *
8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15  */
16
17 #include "wil6210.h"
18 #include "wmi.h"
19
20 #define CHAN60G(_channel, _flags) {                             \
21         .band                   = IEEE80211_BAND_60GHZ,         \
22         .center_freq            = 56160 + (2160 * (_channel)),  \
23         .hw_value               = (_channel),                   \
24         .flags                  = (_flags),                     \
25         .max_antenna_gain       = 0,                            \
26         .max_power              = 40,                           \
27 }
28
29 static struct ieee80211_channel wil_60ghz_channels[] = {
30         CHAN60G(1, 0),
31         CHAN60G(2, 0),
32         CHAN60G(3, 0),
33 /* channel 4 not supported yet */
34 };
35
36 static struct ieee80211_supported_band wil_band_60ghz = {
37         .channels = wil_60ghz_channels,
38         .n_channels = ARRAY_SIZE(wil_60ghz_channels),
39         .ht_cap = {
40                 .ht_supported = true,
41                 .cap = 0, /* TODO */
42                 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K, /* TODO */
43                 .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, /* TODO */
44                 .mcs = {
45                                 /* MCS 1..12 - SC PHY */
46                         .rx_mask = {0xfe, 0x1f}, /* 1..12 */
47                         .tx_params = IEEE80211_HT_MCS_TX_DEFINED, /* TODO */
48                 },
49         },
50 };
51
52 static const struct ieee80211_txrx_stypes
53 wil_mgmt_stypes[NUM_NL80211_IFTYPES] = {
54         [NL80211_IFTYPE_STATION] = {
55                 .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
56                 BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
57                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
58                 BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
59         },
60         [NL80211_IFTYPE_AP] = {
61                 .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
62                 BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
63                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
64                 BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
65         },
66         [NL80211_IFTYPE_P2P_CLIENT] = {
67                 .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
68                 BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
69                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
70                 BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
71         },
72         [NL80211_IFTYPE_P2P_GO] = {
73                 .tx = BIT(IEEE80211_STYPE_ACTION >> 4) |
74                 BIT(IEEE80211_STYPE_PROBE_RESP >> 4),
75                 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
76                 BIT(IEEE80211_STYPE_PROBE_REQ >> 4)
77         },
78 };
79
80 static const u32 wil_cipher_suites[] = {
81         WLAN_CIPHER_SUITE_GCMP,
82 };
83
84 int wil_iftype_nl2wmi(enum nl80211_iftype type)
85 {
86         static const struct {
87                 enum nl80211_iftype nl;
88                 enum wmi_network_type wmi;
89         } __nl2wmi[] = {
90                 {NL80211_IFTYPE_ADHOC,          WMI_NETTYPE_ADHOC},
91                 {NL80211_IFTYPE_STATION,        WMI_NETTYPE_INFRA},
92                 {NL80211_IFTYPE_AP,             WMI_NETTYPE_AP},
93                 {NL80211_IFTYPE_P2P_CLIENT,     WMI_NETTYPE_P2P},
94                 {NL80211_IFTYPE_P2P_GO,         WMI_NETTYPE_P2P},
95                 {NL80211_IFTYPE_MONITOR,        WMI_NETTYPE_ADHOC}, /* FIXME */
96         };
97         uint i;
98
99         for (i = 0; i < ARRAY_SIZE(__nl2wmi); i++) {
100                 if (__nl2wmi[i].nl == type)
101                         return __nl2wmi[i].wmi;
102         }
103
104         return -EOPNOTSUPP;
105 }
106
107 static int wil_cfg80211_get_station(struct wiphy *wiphy,
108                                     struct net_device *ndev,
109                                     u8 *mac, struct station_info *sinfo)
110 {
111         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
112         int rc;
113         struct wmi_notify_req_cmd cmd = {
114                 .cid = 0,
115                 .interval_usec = 0,
116         };
117
118         if (memcmp(mac, wil->dst_addr[0], ETH_ALEN))
119                 return -ENOENT;
120
121         /* WMI_NOTIFY_REQ_DONE_EVENTID handler fills wil->stats.bf_mcs */
122         rc = wmi_call(wil, WMI_NOTIFY_REQ_CMDID, &cmd, sizeof(cmd),
123                       WMI_NOTIFY_REQ_DONE_EVENTID, NULL, 0, 20);
124         if (rc)
125                 return rc;
126
127         sinfo->generation = wil->sinfo_gen;
128
129         sinfo->filled |= STATION_INFO_TX_BITRATE;
130         sinfo->txrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
131         sinfo->txrate.mcs = wil->stats.bf_mcs;
132         sinfo->filled |= STATION_INFO_RX_BITRATE;
133         sinfo->rxrate.flags = RATE_INFO_FLAGS_MCS | RATE_INFO_FLAGS_60G;
134         sinfo->rxrate.mcs = wil->stats.last_mcs_rx;
135
136         if (test_bit(wil_status_fwconnected, &wil->status)) {
137                 sinfo->filled |= STATION_INFO_SIGNAL;
138                 sinfo->signal = 12; /* TODO: provide real value */
139         }
140
141         return 0;
142 }
143
144 static int wil_cfg80211_change_iface(struct wiphy *wiphy,
145                                      struct net_device *ndev,
146                                      enum nl80211_iftype type, u32 *flags,
147                                      struct vif_params *params)
148 {
149         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
150         struct wireless_dev *wdev = wil->wdev;
151
152         switch (type) {
153         case NL80211_IFTYPE_STATION:
154         case NL80211_IFTYPE_AP:
155         case NL80211_IFTYPE_P2P_CLIENT:
156         case NL80211_IFTYPE_P2P_GO:
157                 break;
158         case NL80211_IFTYPE_MONITOR:
159                 if (flags)
160                         wil->monitor_flags = *flags;
161                 else
162                         wil->monitor_flags = 0;
163
164                 break;
165         default:
166                 return -EOPNOTSUPP;
167         }
168
169         wdev->iftype = type;
170
171         return 0;
172 }
173
174 static int wil_cfg80211_scan(struct wiphy *wiphy,
175                              struct cfg80211_scan_request *request)
176 {
177         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
178         struct wireless_dev *wdev = wil->wdev;
179         struct {
180                 struct wmi_start_scan_cmd cmd;
181                 u16 chnl[4];
182         } __packed cmd;
183         uint i, n;
184
185         if (wil->scan_request) {
186                 wil_err(wil, "Already scanning\n");
187                 return -EAGAIN;
188         }
189
190         /* check we are client side */
191         switch (wdev->iftype) {
192         case NL80211_IFTYPE_STATION:
193         case NL80211_IFTYPE_P2P_CLIENT:
194                 break;
195         default:
196                 return -EOPNOTSUPP;
197         }
198
199         /* FW don't support scan after connection attempt */
200         if (test_bit(wil_status_dontscan, &wil->status)) {
201                 wil_err(wil, "Scan after connect attempt not supported\n");
202                 return -EBUSY;
203         }
204
205         wil->scan_request = request;
206
207         memset(&cmd, 0, sizeof(cmd));
208         cmd.cmd.num_channels = 0;
209         n = min(request->n_channels, 4U);
210         for (i = 0; i < n; i++) {
211                 int ch = request->channels[i]->hw_value;
212                 if (ch == 0) {
213                         wil_err(wil,
214                                 "Scan requested for unknown frequency %dMhz\n",
215                                 request->channels[i]->center_freq);
216                         continue;
217                 }
218                 /* 0-based channel indexes */
219                 cmd.cmd.channel_list[cmd.cmd.num_channels++].channel = ch - 1;
220                 wil_dbg_misc(wil, "Scan for ch %d  : %d MHz\n", ch,
221                              request->channels[i]->center_freq);
222         }
223
224         return wmi_send(wil, WMI_START_SCAN_CMDID, &cmd, sizeof(cmd.cmd) +
225                         cmd.cmd.num_channels * sizeof(cmd.cmd.channel_list[0]));
226 }
227
228 static int wil_cfg80211_connect(struct wiphy *wiphy,
229                                 struct net_device *ndev,
230                                 struct cfg80211_connect_params *sme)
231 {
232         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
233         struct cfg80211_bss *bss;
234         struct wmi_connect_cmd conn;
235         const u8 *ssid_eid;
236         const u8 *rsn_eid;
237         int ch;
238         int rc = 0;
239
240         bss = cfg80211_get_bss(wiphy, sme->channel, sme->bssid,
241                                sme->ssid, sme->ssid_len,
242                                WLAN_CAPABILITY_ESS, WLAN_CAPABILITY_ESS);
243         if (!bss) {
244                 wil_err(wil, "Unable to find BSS\n");
245                 return -ENOENT;
246         }
247
248         ssid_eid = ieee80211_bss_get_ie(bss, WLAN_EID_SSID);
249         if (!ssid_eid) {
250                 wil_err(wil, "No SSID\n");
251                 rc = -ENOENT;
252                 goto out;
253         }
254
255         rsn_eid = sme->ie ?
256                         cfg80211_find_ie(WLAN_EID_RSN, sme->ie, sme->ie_len) :
257                         NULL;
258         if (rsn_eid) {
259                 if (sme->ie_len > WMI_MAX_IE_LEN) {
260                         rc = -ERANGE;
261                         wil_err(wil, "IE too large (%td bytes)\n",
262                                 sme->ie_len);
263                         goto out;
264                 }
265                 /*
266                  * For secure assoc, send:
267                  * (1) WMI_DELETE_CIPHER_KEY_CMD
268                  * (2) WMI_SET_APPIE_CMD
269                  */
270                 rc = wmi_del_cipher_key(wil, 0, bss->bssid);
271                 if (rc) {
272                         wil_err(wil, "WMI_DELETE_CIPHER_KEY_CMD failed\n");
273                         goto out;
274                 }
275                 /* WMI_SET_APPIE_CMD */
276                 rc = wmi_set_ie(wil, WMI_FRAME_ASSOC_REQ, sme->ie_len, sme->ie);
277                 if (rc) {
278                         wil_err(wil, "WMI_SET_APPIE_CMD failed\n");
279                         goto out;
280                 }
281         }
282
283         /* WMI_CONNECT_CMD */
284         memset(&conn, 0, sizeof(conn));
285         switch (bss->capability & WLAN_CAPABILITY_DMG_TYPE_MASK) {
286         case WLAN_CAPABILITY_DMG_TYPE_AP:
287                 conn.network_type = WMI_NETTYPE_INFRA;
288                 break;
289         case WLAN_CAPABILITY_DMG_TYPE_PBSS:
290                 conn.network_type = WMI_NETTYPE_P2P;
291                 break;
292         default:
293                 wil_err(wil, "Unsupported BSS type, capability= 0x%04x\n",
294                         bss->capability);
295                 goto out;
296         }
297         if (rsn_eid) {
298                 conn.dot11_auth_mode = WMI_AUTH11_SHARED;
299                 conn.auth_mode = WMI_AUTH_WPA2_PSK;
300                 conn.pairwise_crypto_type = WMI_CRYPT_AES_GCMP;
301                 conn.pairwise_crypto_len = 16;
302         } else {
303                 conn.dot11_auth_mode = WMI_AUTH11_OPEN;
304                 conn.auth_mode = WMI_AUTH_NONE;
305         }
306
307         conn.ssid_len = min_t(u8, ssid_eid[1], 32);
308         memcpy(conn.ssid, ssid_eid+2, conn.ssid_len);
309
310         ch = bss->channel->hw_value;
311         if (ch == 0) {
312                 wil_err(wil, "BSS at unknown frequency %dMhz\n",
313                         bss->channel->center_freq);
314                 rc = -EOPNOTSUPP;
315                 goto out;
316         }
317         conn.channel = ch - 1;
318
319         memcpy(conn.bssid, bss->bssid, 6);
320         memcpy(conn.dst_mac, bss->bssid, 6);
321         /*
322          * FW don't support scan after connection attempt
323          */
324         set_bit(wil_status_dontscan, &wil->status);
325         set_bit(wil_status_fwconnecting, &wil->status);
326
327         rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
328         if (rc == 0) {
329                 /* Connect can take lots of time */
330                 mod_timer(&wil->connect_timer,
331                           jiffies + msecs_to_jiffies(2000));
332         } else {
333                 clear_bit(wil_status_dontscan, &wil->status);
334                 clear_bit(wil_status_fwconnecting, &wil->status);
335         }
336
337  out:
338         cfg80211_put_bss(wiphy, bss);
339
340         return rc;
341 }
342
343 static int wil_cfg80211_disconnect(struct wiphy *wiphy,
344                                    struct net_device *ndev,
345                                    u16 reason_code)
346 {
347         int rc;
348         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
349
350         rc = wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
351
352         return rc;
353 }
354
355 static int wil_cfg80211_set_channel(struct wiphy *wiphy,
356                                     struct cfg80211_chan_def *chandef)
357 {
358         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
359         struct wireless_dev *wdev = wil->wdev;
360
361         wdev->preset_chandef = *chandef;
362
363         return 0;
364 }
365
366 static int wil_cfg80211_add_key(struct wiphy *wiphy,
367                                 struct net_device *ndev,
368                                 u8 key_index, bool pairwise,
369                                 const u8 *mac_addr,
370                                 struct key_params *params)
371 {
372         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
373
374         /* group key is not used */
375         if (!pairwise)
376                 return 0;
377
378         return wmi_add_cipher_key(wil, key_index, mac_addr,
379                                   params->key_len, params->key);
380 }
381
382 static int wil_cfg80211_del_key(struct wiphy *wiphy,
383                                 struct net_device *ndev,
384                                 u8 key_index, bool pairwise,
385                                 const u8 *mac_addr)
386 {
387         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
388
389         /* group key is not used */
390         if (!pairwise)
391                 return 0;
392
393         return wmi_del_cipher_key(wil, key_index, mac_addr);
394 }
395
396 /* Need to be present or wiphy_new() will WARN */
397 static int wil_cfg80211_set_default_key(struct wiphy *wiphy,
398                                         struct net_device *ndev,
399                                         u8 key_index, bool unicast,
400                                         bool multicast)
401 {
402         return 0;
403 }
404
405 static int wil_fix_bcon(struct wil6210_priv *wil,
406                         struct cfg80211_beacon_data *bcon)
407 {
408         struct ieee80211_mgmt *f = (struct ieee80211_mgmt *)bcon->probe_resp;
409         size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
410         int rc = 0;
411
412         if (bcon->probe_resp_len <= hlen)
413                 return 0;
414
415         if (!bcon->proberesp_ies) {
416                 bcon->proberesp_ies = f->u.probe_resp.variable;
417                 bcon->proberesp_ies_len = bcon->probe_resp_len - hlen;
418                 rc = 1;
419         }
420         if (!bcon->assocresp_ies) {
421                 bcon->assocresp_ies = f->u.probe_resp.variable;
422                 bcon->assocresp_ies_len = bcon->probe_resp_len - hlen;
423                 rc = 1;
424         }
425
426         return rc;
427 }
428
429 static int wil_cfg80211_start_ap(struct wiphy *wiphy,
430                                  struct net_device *ndev,
431                                  struct cfg80211_ap_settings *info)
432 {
433         int rc = 0;
434         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
435         struct wireless_dev *wdev = ndev->ieee80211_ptr;
436         struct ieee80211_channel *channel = info->chandef.chan;
437         struct cfg80211_beacon_data *bcon = &info->beacon;
438         u8 wmi_nettype = wil_iftype_nl2wmi(wdev->iftype);
439
440         if (!channel) {
441                 wil_err(wil, "AP: No channel???\n");
442                 return -EINVAL;
443         }
444
445         wil_dbg_misc(wil, "AP on Channel %d %d MHz, %s\n", channel->hw_value,
446                      channel->center_freq, info->privacy ? "secure" : "open");
447         print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
448                              info->ssid, info->ssid_len);
449
450         if (wil_fix_bcon(wil, bcon))
451                 wil_dbg_misc(wil, "Fixed bcon\n");
452
453         rc = wil_reset(wil);
454         if (rc)
455                 return rc;
456
457         /* Rx VRING. */
458         rc = wil_rx_init(wil);
459         if (rc)
460                 return rc;
461
462         rc = wmi_set_ssid(wil, info->ssid_len, info->ssid);
463         if (rc)
464                 return rc;
465
466         /* MAC address - pre-requisite for other commands */
467         wmi_set_mac_address(wil, ndev->dev_addr);
468
469         /* IE's */
470         /* bcon 'head IE's are not relevant for 60g band */
471         /*
472          * FW do not form regular beacon, so bcon IE's are not set
473          * For the DMG bcon, when it will be supported, bcon IE's will
474          * be reused; add something like:
475          * wmi_set_ie(wil, WMI_FRAME_BEACON, bcon->beacon_ies_len,
476          * bcon->beacon_ies);
477          */
478         wmi_set_ie(wil, WMI_FRAME_PROBE_RESP, bcon->proberesp_ies_len,
479                    bcon->proberesp_ies);
480         wmi_set_ie(wil, WMI_FRAME_ASSOC_RESP, bcon->assocresp_ies_len,
481                    bcon->assocresp_ies);
482
483         wil->secure_pcp = info->privacy;
484
485         rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
486                            channel->hw_value);
487         if (rc)
488                 return rc;
489
490
491         netif_carrier_on(ndev);
492
493         return rc;
494 }
495
496 static int wil_cfg80211_stop_ap(struct wiphy *wiphy,
497                                 struct net_device *ndev)
498 {
499         int rc = 0;
500         struct wil6210_priv *wil = wiphy_to_wil(wiphy);
501
502         rc = wmi_pcp_stop(wil);
503
504         return rc;
505 }
506
507 static struct cfg80211_ops wil_cfg80211_ops = {
508         .scan = wil_cfg80211_scan,
509         .connect = wil_cfg80211_connect,
510         .disconnect = wil_cfg80211_disconnect,
511         .change_virtual_intf = wil_cfg80211_change_iface,
512         .get_station = wil_cfg80211_get_station,
513         .set_monitor_channel = wil_cfg80211_set_channel,
514         .add_key = wil_cfg80211_add_key,
515         .del_key = wil_cfg80211_del_key,
516         .set_default_key = wil_cfg80211_set_default_key,
517         /* AP mode */
518         .start_ap = wil_cfg80211_start_ap,
519         .stop_ap = wil_cfg80211_stop_ap,
520 };
521
522 static void wil_wiphy_init(struct wiphy *wiphy)
523 {
524         /* TODO: set real value */
525         wiphy->max_scan_ssids = 10;
526         wiphy->max_num_pmkids = 0 /* TODO: */;
527         wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
528                                  BIT(NL80211_IFTYPE_AP) |
529                                  BIT(NL80211_IFTYPE_MONITOR);
530         /* TODO: enable P2P when integrated with supplicant:
531          * BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO)
532          */
533         wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME |
534                         WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
535         dev_warn(wiphy_dev(wiphy), "%s : flags = 0x%08x\n",
536                  __func__, wiphy->flags);
537         wiphy->probe_resp_offload =
538                 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
539                 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
540                 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
541
542         wiphy->bands[IEEE80211_BAND_60GHZ] = &wil_band_60ghz;
543
544         /* TODO: figure this out */
545         wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
546
547         wiphy->cipher_suites = wil_cipher_suites;
548         wiphy->n_cipher_suites = ARRAY_SIZE(wil_cipher_suites);
549         wiphy->mgmt_stypes = wil_mgmt_stypes;
550 }
551
552 struct wireless_dev *wil_cfg80211_init(struct device *dev)
553 {
554         int rc = 0;
555         struct wireless_dev *wdev;
556
557         wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
558         if (!wdev)
559                 return ERR_PTR(-ENOMEM);
560
561         wdev->wiphy = wiphy_new(&wil_cfg80211_ops,
562                                 sizeof(struct wil6210_priv));
563         if (!wdev->wiphy) {
564                 rc = -ENOMEM;
565                 goto out;
566         }
567
568         set_wiphy_dev(wdev->wiphy, dev);
569         wil_wiphy_init(wdev->wiphy);
570
571         rc = wiphy_register(wdev->wiphy);
572         if (rc < 0)
573                 goto out_failed_reg;
574
575         return wdev;
576
577 out_failed_reg:
578         wiphy_free(wdev->wiphy);
579 out:
580         kfree(wdev);
581
582         return ERR_PTR(rc);
583 }
584
585 void wil_wdev_free(struct wil6210_priv *wil)
586 {
587         struct wireless_dev *wdev = wil_to_wdev(wil);
588
589         if (!wdev)
590                 return;
591
592         wiphy_unregister(wdev->wiphy);
593         wiphy_free(wdev->wiphy);
594         kfree(wdev);
595 }