drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c

   1 /*
   2  * Copyright (c) 2010 Broadcom Corporation
   3  * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
   4  *
   5  * Permission to use, copy, modify, and/or distribute this software for any
   6  * purpose with or without fee is hereby granted, provided that the above
   7  * copyright notice and this permission notice appear in all copies.
   8  *
   9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  12  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  14  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  15  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  16  */
  17
  18 #define __UNDEF_NO_VERSION__
  19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  20
  21 #include <linux/etherdevice.h>
  22 #include <linux/sched.h>
  23 #include <linux/firmware.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/module.h>
  26 #include <linux/bcma/bcma.h>
  27 #include <net/mac80211.h>
  28 #include <defs.h>
  29 #include "phy/phy_int.h"
  30 #include "d11.h"
  31 #include "channel.h"
  32 #include "scb.h"
  33 #include "pub.h"
  34 #include "ucode_loader.h"
  35 #include "mac80211_if.h"
  36 #include "main.h"
  37 #include "debug.h"
  38 #include "led.h"
  39
  40 #define N_TX_QUEUES     4 /* #tx queues on mac80211<->driver interface */
  41 #define BRCMS_FLUSH_TIMEOUT     500 /* msec */
  42
  43 /* Flags we support */
  44 #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
  45         FIF_ALLMULTI | \
  46         FIF_FCSFAIL | \
  47         FIF_CONTROL | \
  48         FIF_OTHER_BSS | \
  49         FIF_BCN_PRBRESP_PROMISC | \
  50         FIF_PSPOLL)
  51
  52 #define CHAN2GHZ(channel, freqency, chflags)  { \
  53         .band = IEEE80211_BAND_2GHZ, \
  54         .center_freq = (freqency), \
  55         .hw_value = (channel), \
  56         .flags = chflags, \
  57         .max_antenna_gain = 0, \
  58         .max_power = 19, \
  59 }
  60
  61 #define CHAN5GHZ(channel, chflags)  { \
  62         .band = IEEE80211_BAND_5GHZ, \
  63         .center_freq = 5000 + 5*(channel), \
  64         .hw_value = (channel), \
  65         .flags = chflags, \
  66         .max_antenna_gain = 0, \
  67         .max_power = 21, \
  68 }
  69
  70 #define RATE(rate100m, _flags) { \
  71         .bitrate = (rate100m), \
  72         .flags = (_flags), \
  73         .hw_value = (rate100m / 5), \
  74 }
  75
  76 struct firmware_hdr {
  77         __le32 offset;
  78         __le32 len;
  79         __le32 idx;
  80 };
  81
  82 static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
  83         "brcm/bcm43xx",
  84         NULL
  85 };
  86
  87 static int n_adapters_found;
  88
  89 MODULE_AUTHOR("Broadcom Corporation");
  90 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
  91 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
  92 MODULE_LICENSE("Dual BSD/GPL");
  93 /* This needs to be adjusted when brcms_firmwares changes */
  94 MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
  95 MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
  96
  97 /* recognized BCMA Core IDs */
  98 static struct bcma_device_id brcms_coreid_table[] = {
  99         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
 100         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
 101         BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
 102         BCMA_CORETABLE_END
 103 };
 104 MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
 105
 106 #if defined(CONFIG_BRCMDBG)
 107 /*
 108  * Module parameter for setting the debug message level. Available
 109  * flags are specified by the BRCM_DL_* macros in
 110  * drivers/net/wireless/brcm80211/include/defs.h.
 111  */
 112 module_param_named(debug, brcm_msg_level, uint, S_IRUGO | S_IWUSR);
 113 #endif
 114
 115 static struct ieee80211_channel brcms_2ghz_chantable[] = {
 116         CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
 117         CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
 118         CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
 119         CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
 120         CHAN2GHZ(5, 2432, 0),
 121         CHAN2GHZ(6, 2437, 0),
 122         CHAN2GHZ(7, 2442, 0),
 123         CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
 124         CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
 125         CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
 126         CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
 127         CHAN2GHZ(12, 2467,
 128                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 129                  IEEE80211_CHAN_NO_HT40PLUS),
 130         CHAN2GHZ(13, 2472,
 131                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 132                  IEEE80211_CHAN_NO_HT40PLUS),
 133         CHAN2GHZ(14, 2484,
 134                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
 135                  IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
 136                  IEEE80211_CHAN_NO_OFDM)
 137 };
 138
 139 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
 140         /* UNII-1 */
 141         CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
 142         CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
 143         CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
 144         CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
 145         /* UNII-2 */
 146         CHAN5GHZ(52,
 147                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 148                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 149         CHAN5GHZ(56,
 150                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 151                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 152         CHAN5GHZ(60,
 153                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 154                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 155         CHAN5GHZ(64,
 156                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 157                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 158         /* MID */
 159         CHAN5GHZ(100,
 160                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 161                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 162         CHAN5GHZ(104,
 163                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 164                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 165         CHAN5GHZ(108,
 166                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 167                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 168         CHAN5GHZ(112,
 169                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 170                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 171         CHAN5GHZ(116,
 172                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 173                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 174         CHAN5GHZ(120,
 175                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 176                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 177         CHAN5GHZ(124,
 178                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 179                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 180         CHAN5GHZ(128,
 181                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 182                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 183         CHAN5GHZ(132,
 184                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 185                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
 186         CHAN5GHZ(136,
 187                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 188                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
 189         CHAN5GHZ(140,
 190                  IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
 191                  IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
 192                  IEEE80211_CHAN_NO_HT40MINUS),
 193         /* UNII-3 */
 194         CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
 195         CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
 196         CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
 197         CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
 198         CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
 199 };
 200
 201 /*
 202  * The rate table is used for both 2.4G and 5G rates. The
 203  * latter being a subset as it does not support CCK rates.
 204  */
 205 static struct ieee80211_rate legacy_ratetable[] = {
 206         RATE(10, 0),
 207         RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
 208         RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
 209         RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
 210         RATE(60, 0),
 211         RATE(90, 0),
 212         RATE(120, 0),
 213         RATE(180, 0),
 214         RATE(240, 0),
 215         RATE(360, 0),
 216         RATE(480, 0),
 217         RATE(540, 0),
 218 };
 219
 220 static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
 221         .band = IEEE80211_BAND_2GHZ,
 222         .channels = brcms_2ghz_chantable,
 223         .n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
 224         .bitrates = legacy_ratetable,
 225         .n_bitrates = ARRAY_SIZE(legacy_ratetable),
 226         .ht_cap = {
 227                    /* from include/linux/ieee80211.h */
 228                    .cap = IEEE80211_HT_CAP_GRN_FLD |
 229                           IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
 230                    .ht_supported = true,
 231                    .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 232                    .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 233                    .mcs = {
 234                            /* placeholders for now */
 235                            .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 236                            .rx_highest = cpu_to_le16(500),
 237                            .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 238                    }
 239 };
 240
 241 static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
 242         .band = IEEE80211_BAND_5GHZ,
 243         .channels = brcms_5ghz_nphy_chantable,
 244         .n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
 245         .bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
 246         .n_bitrates = ARRAY_SIZE(legacy_ratetable) -
 247                         BRCMS_LEGACY_5G_RATE_OFFSET,
 248         .ht_cap = {
 249                    .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
 250                           IEEE80211_HT_CAP_SGI_40,
 251                    .ht_supported = true,
 252                    .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
 253                    .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
 254                    .mcs = {
 255                            /* placeholders for now */
 256                            .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
 257                            .rx_highest = cpu_to_le16(500),
 258                            .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
 259                    }
 260 };
 261
 262 /* flags the given rate in rateset as requested */
 263 static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
 264 {
 265         u32 i;
 266
 267         for (i = 0; i < rs->count; i++) {
 268                 if (rate != (rs->rates[i] & 0x7f))
 269                         continue;
 270
 271                 if (is_br)
 272                         rs->rates[i] |= BRCMS_RATE_FLAG;
 273                 else
 274                         rs->rates[i] &= BRCMS_RATE_MASK;
 275                 return;
 276         }
 277 }
 278
 279 /**
 280  * This function frees the WL per-device resources.
 281  *
 282  * This function frees resources owned by the WL device pointed to
 283  * by the wl parameter.
 284  *
 285  * precondition: can both be called locked and unlocked
 286  *
 287  */
 288 static void brcms_free(struct brcms_info *wl)
 289 {
 290         struct brcms_timer *t, *next;
 291
 292         /* free ucode data */
 293         if (wl->fw.fw_cnt)
 294                 brcms_ucode_data_free(&wl->ucode);
 295         if (wl->irq)
 296                 free_irq(wl->irq, wl);
 297
 298         /* kill dpc */
 299         tasklet_kill(&wl->tasklet);
 300
 301         if (wl->pub) {
 302                 brcms_debugfs_detach(wl->pub);
 303                 brcms_c_module_unregister(wl->pub, "linux", wl);
 304         }
 305
 306         /* free common resources */
 307         if (wl->wlc) {
 308                 brcms_c_detach(wl->wlc);
 309                 wl->wlc = NULL;
 310                 wl->pub = NULL;
 311         }
 312
 313         /* virtual interface deletion is deferred so we cannot spinwait */
 314
 315         /* wait for all pending callbacks to complete */
 316         while (atomic_read(&wl->callbacks) > 0)
 317                 schedule();
 318
 319         /* free timers */
 320         for (t = wl->timers; t; t = next) {
 321                 next = t->next;
 322 #ifdef DEBUG
 323                 kfree(t->name);
 324 #endif
 325                 kfree(t);
 326         }
 327 }
 328
 329 /*
 330 * called from both kernel as from this kernel module (error flow on attach)
 331 * precondition: perimeter lock is not acquired.
 332 */
 333 static void brcms_remove(struct bcma_device *pdev)
 334 {
 335         struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
 336         struct brcms_info *wl = hw->priv;
 337
 338         if (wl->wlc) {
 339                 brcms_led_unregister(wl);
 340                 wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
 341                 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 342                 ieee80211_unregister_hw(hw);
 343         }
 344
 345         brcms_free(wl);
 346
 347         bcma_set_drvdata(pdev, NULL);
 348         ieee80211_free_hw(hw);
 349 }
 350
 351 /*
 352  * Precondition: Since this function is called in brcms_pci_probe() context,
 353  * no locking is required.
 354  */
 355 static void brcms_release_fw(struct brcms_info *wl)
 356 {
 357         int i;
 358         for (i = 0; i < MAX_FW_IMAGES; i++) {
 359                 release_firmware(wl->fw.fw_bin[i]);
 360                 release_firmware(wl->fw.fw_hdr[i]);
 361         }
 362 }
 363
 364 /*
 365  * Precondition: Since this function is called in brcms_pci_probe() context,
 366  * no locking is required.
 367  */
 368 static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
 369 {
 370         int status;
 371         struct device *device = &pdev->dev;
 372         char fw_name[100];
 373         int i;
 374
 375         memset(&wl->fw, 0, sizeof(struct brcms_firmware));
 376         for (i = 0; i < MAX_FW_IMAGES; i++) {
 377                 if (brcms_firmwares[i] == NULL)
 378                         break;
 379                 sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
 380                         UCODE_LOADER_API_VER);
 381                 status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
 382                 if (status) {
 383                         wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 384                                   KBUILD_MODNAME, fw_name);
 385                         return status;
 386                 }
 387                 sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
 388                         UCODE_LOADER_API_VER);
 389                 status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
 390                 if (status) {
 391                         wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
 392                                   KBUILD_MODNAME, fw_name);
 393                         return status;
 394                 }
 395                 wl->fw.hdr_num_entries[i] =
 396                     wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
 397         }
 398         wl->fw.fw_cnt = i;
 399         status = brcms_ucode_data_init(wl, &wl->ucode);
 400         brcms_release_fw(wl);
 401         return status;
 402 }
 403
 404 static void brcms_ops_tx(struct ieee80211_hw *hw,
 405                          struct ieee80211_tx_control *control,
 406                          struct sk_buff *skb)
 407 {
 408         struct brcms_info *wl = hw->priv;
 409         struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 410
 411         spin_lock_bh(&wl->lock);
 412         if (!wl->pub->up) {
 413                 brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
 414                 kfree_skb(skb);
 415                 goto done;
 416         }
 417         if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
 418                 tx_info->rate_driver_data[0] = control->sta;
 419  done:
 420         spin_unlock_bh(&wl->lock);
 421 }
 422
 423 static int brcms_ops_start(struct ieee80211_hw *hw)
 424 {
 425         struct brcms_info *wl = hw->priv;
 426         bool blocked;
 427         int err;
 428
 429         ieee80211_wake_queues(hw);
 430         spin_lock_bh(&wl->lock);
 431         blocked = brcms_rfkill_set_hw_state(wl);
 432         spin_unlock_bh(&wl->lock);
 433         if (!blocked)
 434                 wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
 435
 436         if (!wl->ucode.bcm43xx_bomminor) {
 437                 err = brcms_request_fw(wl, wl->wlc->hw->d11core);
 438                 if (err) {
 439                         brcms_remove(wl->wlc->hw->d11core);
 440                         return -ENOENT;
 441                 }
 442         }
 443
 444         spin_lock_bh(&wl->lock);
 445         /* avoid acknowledging frames before a non-monitor device is added */
 446         wl->mute_tx = true;
 447
 448         if (!wl->pub->up)
 449                 if (!blocked)
 450                         err = brcms_up(wl);
 451                 else
 452                         err = -ERFKILL;
 453         else
 454                 err = -ENODEV;
 455         spin_unlock_bh(&wl->lock);
 456
 457         if (err != 0)
 458                 brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
 459                           __func__, err);
 460         return err;
 461 }
 462
 463 static void brcms_ops_stop(struct ieee80211_hw *hw)
 464 {
 465         struct brcms_info *wl = hw->priv;
 466         int status;
 467
 468         ieee80211_stop_queues(hw);
 469
 470         if (wl->wlc == NULL)
 471                 return;
 472
 473         spin_lock_bh(&wl->lock);
 474         status = brcms_c_chipmatch(wl->wlc->hw->d11core);
 475         spin_unlock_bh(&wl->lock);
 476         if (!status) {
 477                 brcms_err(wl->wlc->hw->d11core,
 478                           "wl: brcms_ops_stop: chipmatch failed\n");
 479                 return;
 480         }
 481
 482         /* put driver in down state */
 483         spin_lock_bh(&wl->lock);
 484         brcms_down(wl);
 485         spin_unlock_bh(&wl->lock);
 486 }
 487
 488 static int
 489 brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 490 {
 491         struct brcms_info *wl = hw->priv;
 492
 493         /* Just STA, AP and ADHOC for now */
 494         if (vif->type != NL80211_IFTYPE_STATION &&
 495             vif->type != NL80211_IFTYPE_AP &&
 496             vif->type != NL80211_IFTYPE_ADHOC) {
 497                 brcms_err(wl->wlc->hw->d11core,
 498                           "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n",
 499                           __func__, vif->type);
 500                 return -EOPNOTSUPP;
 501         }
 502
 503         spin_lock_bh(&wl->lock);
 504         wl->mute_tx = false;
 505         brcms_c_mute(wl->wlc, false);
 506         if (vif->type == NL80211_IFTYPE_STATION)
 507                 brcms_c_start_station(wl->wlc, vif->addr);
 508         else if (vif->type == NL80211_IFTYPE_AP)
 509                 brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
 510                                  vif->bss_conf.ssid, vif->bss_conf.ssid_len);
 511         else if (vif->type == NL80211_IFTYPE_ADHOC)
 512                 brcms_c_start_adhoc(wl->wlc, vif->addr);
 513         spin_unlock_bh(&wl->lock);
 514
 515         return 0;
 516 }
 517
 518 static void
 519 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 520 {
 521 }
 522
 523 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
 524 {
 525         struct ieee80211_conf *conf = &hw->conf;
 526         struct brcms_info *wl = hw->priv;
 527         struct bcma_device *core = wl->wlc->hw->d11core;
 528         int err = 0;
 529         int new_int;
 530
 531         spin_lock_bh(&wl->lock);
 532         if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
 533                 brcms_c_set_beacon_listen_interval(wl->wlc,
 534                                                    conf->listen_interval);
 535         }
 536         if (changed & IEEE80211_CONF_CHANGE_MONITOR)
 537                 brcms_dbg_info(core, "%s: change monitor mode: %s\n",
 538                                __func__, conf->flags & IEEE80211_CONF_MONITOR ?
 539                                "true" : "false");
 540         if (changed & IEEE80211_CONF_CHANGE_PS)
 541                 brcms_err(core, "%s: change power-save mode: %s (implement)\n",
 542                           __func__, conf->flags & IEEE80211_CONF_PS ?
 543                           "true" : "false");
 544
 545         if (changed & IEEE80211_CONF_CHANGE_POWER) {
 546                 err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
 547                 if (err < 0) {
 548                         brcms_err(core, "%s: Error setting power_level\n",
 549                                   __func__);
 550                         goto config_out;
 551                 }
 552                 new_int = brcms_c_get_tx_power(wl->wlc);
 553                 if (new_int != conf->power_level)
 554                         brcms_err(core,
 555                                   "%s: Power level req != actual, %d %d\n",
 556                                   __func__, conf->power_level,
 557                                   new_int);
 558         }
 559         if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
 560                 if (conf->chandef.width == NL80211_CHAN_WIDTH_20 ||
 561                     conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
 562                         err = brcms_c_set_channel(wl->wlc,
 563                                                   conf->chandef.chan->hw_value);
 564                 else
 565                         err = -ENOTSUPP;
 566         }
 567         if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 568                 err = brcms_c_set_rate_limit(wl->wlc,
 569                                              conf->short_frame_max_tx_count,
 570                                              conf->long_frame_max_tx_count);
 571
 572  config_out:
 573         spin_unlock_bh(&wl->lock);
 574         return err;
 575 }
 576
 577 static void
 578 brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
 579                         struct ieee80211_vif *vif,
 580                         struct ieee80211_bss_conf *info, u32 changed)
 581 {
 582         struct brcms_info *wl = hw->priv;
 583         struct bcma_device *core = wl->wlc->hw->d11core;
 584
 585         if (changed & BSS_CHANGED_ASSOC) {
 586                 /* association status changed (associated/disassociated)
 587                  * also implies a change in the AID.
 588                  */
 589                 brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
 590                           __func__, info->assoc ? "" : "dis");
 591                 spin_lock_bh(&wl->lock);
 592                 brcms_c_associate_upd(wl->wlc, info->assoc);
 593                 spin_unlock_bh(&wl->lock);
 594         }
 595         if (changed & BSS_CHANGED_ERP_SLOT) {
 596                 s8 val;
 597
 598                 /* slot timing changed */
 599                 if (info->use_short_slot)
 600                         val = 1;
 601                 else
 602                         val = 0;
 603                 spin_lock_bh(&wl->lock);
 604                 brcms_c_set_shortslot_override(wl->wlc, val);
 605                 spin_unlock_bh(&wl->lock);
 606         }
 607
 608         if (changed & BSS_CHANGED_HT) {
 609                 /* 802.11n parameters changed */
 610                 u16 mode = info->ht_operation_mode;
 611
 612                 spin_lock_bh(&wl->lock);
 613                 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
 614                         mode & IEEE80211_HT_OP_MODE_PROTECTION);
 615                 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
 616                         mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
 617                 brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
 618                         mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
 619                 spin_unlock_bh(&wl->lock);
 620         }
 621         if (changed & BSS_CHANGED_BASIC_RATES) {
 622                 struct ieee80211_supported_band *bi;
 623                 u32 br_mask, i;
 624                 u16 rate;
 625                 struct brcm_rateset rs;
 626                 int error;
 627
 628                 /* retrieve the current rates */
 629                 spin_lock_bh(&wl->lock);
 630                 brcms_c_get_current_rateset(wl->wlc, &rs);
 631                 spin_unlock_bh(&wl->lock);
 632
 633                 br_mask = info->basic_rates;
 634                 bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
 635                 for (i = 0; i < bi->n_bitrates; i++) {
 636                         /* convert to internal rate value */
 637                         rate = (bi->bitrates[i].bitrate << 1) / 10;
 638
 639                         /* set/clear basic rate flag */
 640                         brcms_set_basic_rate(&rs, rate, br_mask & 1);
 641                         br_mask >>= 1;
 642                 }
 643
 644                 /* update the rate set */
 645                 spin_lock_bh(&wl->lock);
 646                 error = brcms_c_set_rateset(wl->wlc, &rs);
 647                 spin_unlock_bh(&wl->lock);
 648                 if (error)
 649                         brcms_err(core, "changing basic rates failed: %d\n",
 650                                   error);
 651         }
 652         if (changed & BSS_CHANGED_BEACON_INT) {
 653                 /* Beacon interval changed */
 654                 spin_lock_bh(&wl->lock);
 655                 brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
 656                 spin_unlock_bh(&wl->lock);
 657         }
 658         if (changed & BSS_CHANGED_BSSID) {
 659                 /* BSSID changed, for whatever reason (IBSS and managed mode) */
 660                 spin_lock_bh(&wl->lock);
 661                 brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
 662                 spin_unlock_bh(&wl->lock);
 663         }
 664         if (changed & BSS_CHANGED_SSID) {
 665                 /* BSSID changed, for whatever reason (IBSS and managed mode) */
 666                 spin_lock_bh(&wl->lock);
 667                 brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len);
 668                 spin_unlock_bh(&wl->lock);
 669         }
 670         if (changed & BSS_CHANGED_BEACON) {
 671                 /* Beacon data changed, retrieve new beacon (beaconing modes) */
 672                 struct sk_buff *beacon;
 673                 u16 tim_offset = 0;
 674
 675                 spin_lock_bh(&wl->lock);
 676                 beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL);
 677                 brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
 678                                        info->dtim_period);
 679                 spin_unlock_bh(&wl->lock);
 680         }
 681
 682         if (changed & BSS_CHANGED_AP_PROBE_RESP) {
 683                 struct sk_buff *probe_resp;
 684
 685                 spin_lock_bh(&wl->lock);
 686                 probe_resp = ieee80211_proberesp_get(hw, vif);
 687                 brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
 688                 spin_unlock_bh(&wl->lock);
 689         }
 690
 691         if (changed & BSS_CHANGED_BEACON_ENABLED) {
 692                 /* Beaconing should be enabled/disabled (beaconing modes) */
 693                 brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
 694                           info->enable_beacon ? "true" : "false");
 695                 if (info->enable_beacon &&
 696                     hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) {
 697                         brcms_c_enable_probe_resp(wl->wlc, true);
 698                 } else {
 699                         brcms_c_enable_probe_resp(wl->wlc, false);
 700                 }
 701         }
 702
 703         if (changed & BSS_CHANGED_CQM) {
 704                 /* Connection quality monitor config changed */
 705                 brcms_err(core, "%s: cqm change: threshold %d, hys %d "
 706                           " (implement)\n", __func__, info->cqm_rssi_thold,
 707                           info->cqm_rssi_hyst);
 708         }
 709
 710         if (changed & BSS_CHANGED_IBSS) {
 711                 /* IBSS join status changed */
 712                 brcms_err(core, "%s: IBSS joined: %s (implement)\n",
 713                           __func__, info->ibss_joined ? "true" : "false");
 714         }
 715
 716         if (changed & BSS_CHANGED_ARP_FILTER) {
 717                 /* Hardware ARP filter address list or state changed */
 718                 brcms_err(core, "%s: arp filtering: %d addresses"
 719                           " (implement)\n", __func__, info->arp_addr_cnt);
 720         }
 721
 722         if (changed & BSS_CHANGED_QOS) {
 723                 /*
 724                  * QoS for this association was enabled/disabled.
 725                  * Note that it is only ever disabled for station mode.
 726                  */
 727                 brcms_err(core, "%s: qos enabled: %s (implement)\n",
 728                           __func__, info->qos ? "true" : "false");
 729         }
 730         return;
 731 }
 732
 733 static void
 734 brcms_ops_configure_filter(struct ieee80211_hw *hw,
 735                         unsigned int changed_flags,
 736                         unsigned int *total_flags, u64 multicast)
 737 {
 738         struct brcms_info *wl = hw->priv;
 739         struct bcma_device *core = wl->wlc->hw->d11core;
 740
 741         changed_flags &= MAC_FILTERS;
 742         *total_flags &= MAC_FILTERS;
 743
 744         if (changed_flags & FIF_PROMISC_IN_BSS)
 745                 brcms_dbg_info(core, "FIF_PROMISC_IN_BSS\n");
 746         if (changed_flags & FIF_ALLMULTI)
 747                 brcms_dbg_info(core, "FIF_ALLMULTI\n");
 748         if (changed_flags & FIF_FCSFAIL)
 749                 brcms_dbg_info(core, "FIF_FCSFAIL\n");
 750         if (changed_flags & FIF_CONTROL)
 751                 brcms_dbg_info(core, "FIF_CONTROL\n");
 752         if (changed_flags & FIF_OTHER_BSS)
 753                 brcms_dbg_info(core, "FIF_OTHER_BSS\n");
 754         if (changed_flags & FIF_PSPOLL)
 755                 brcms_dbg_info(core, "FIF_PSPOLL\n");
 756         if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
 757                 brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
 758
 759         spin_lock_bh(&wl->lock);
 760         brcms_c_mac_promisc(wl->wlc, *total_flags);
 761         spin_unlock_bh(&wl->lock);
 762         return;
 763 }
 764
 765 static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw)
 766 {
 767         struct brcms_info *wl = hw->priv;
 768         spin_lock_bh(&wl->lock);
 769         brcms_c_scan_start(wl->wlc);
 770         spin_unlock_bh(&wl->lock);
 771         return;
 772 }
 773
 774 static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw)
 775 {
 776         struct brcms_info *wl = hw->priv;
 777         spin_lock_bh(&wl->lock);
 778         brcms_c_scan_stop(wl->wlc);
 779         spin_unlock_bh(&wl->lock);
 780         return;
 781 }
 782
 783 static int
 784 brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
 785                   const struct ieee80211_tx_queue_params *params)
 786 {
 787         struct brcms_info *wl = hw->priv;
 788
 789         spin_lock_bh(&wl->lock);
 790         brcms_c_wme_setparams(wl->wlc, queue, params, true);
 791         spin_unlock_bh(&wl->lock);
 792
 793         return 0;
 794 }
 795
 796 static int
 797 brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 798                struct ieee80211_sta *sta)
 799 {
 800         struct brcms_info *wl = hw->priv;
 801         struct scb *scb = &wl->wlc->pri_scb;
 802
 803         brcms_c_init_scb(scb);
 804
 805         wl->pub->global_ampdu = &(scb->scb_ampdu);
 806         wl->pub->global_ampdu->scb = scb;
 807         wl->pub->global_ampdu->max_pdu = 16;
 808
 809         /*
 810          * minstrel_ht initiates addBA on our behalf by calling
 811          * ieee80211_start_tx_ba_session()
 812          */
 813         return 0;
 814 }
 815
 816 static int
 817 brcms_ops_ampdu_action(struct ieee80211_hw *hw,
 818                     struct ieee80211_vif *vif,
 819                     enum ieee80211_ampdu_mlme_action action,
 820                     struct ieee80211_sta *sta, u16 tid, u16 *ssn,
 821                     u8 buf_size)
 822 {
 823         struct brcms_info *wl = hw->priv;
 824         struct scb *scb = &wl->wlc->pri_scb;
 825         int status;
 826
 827         if (WARN_ON(scb->magic != SCB_MAGIC))
 828                 return -EIDRM;
 829         switch (action) {
 830         case IEEE80211_AMPDU_RX_START:
 831                 break;
 832         case IEEE80211_AMPDU_RX_STOP:
 833                 break;
 834         case IEEE80211_AMPDU_TX_START:
 835                 spin_lock_bh(&wl->lock);
 836                 status = brcms_c_aggregatable(wl->wlc, tid);
 837                 spin_unlock_bh(&wl->lock);
 838                 if (!status) {
 839                         brcms_err(wl->wlc->hw->d11core,
 840                                   "START: tid %d is not agg\'able\n", tid);
 841                         return -EINVAL;
 842                 }
 843                 ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 844                 break;
 845
 846         case IEEE80211_AMPDU_TX_STOP_CONT:
 847         case IEEE80211_AMPDU_TX_STOP_FLUSH:
 848         case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
 849                 spin_lock_bh(&wl->lock);
 850                 brcms_c_ampdu_flush(wl->wlc, sta, tid);
 851                 spin_unlock_bh(&wl->lock);
 852                 ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
 853                 break;
 854         case IEEE80211_AMPDU_TX_OPERATIONAL:
 855                 /*
 856                  * BA window size from ADDBA response ('buf_size') defines how
 857                  * many outstanding MPDUs are allowed for the BA stream by
 858                  * recipient and traffic class. 'ampdu_factor' gives maximum
 859                  * AMPDU size.
 860                  */
 861                 spin_lock_bh(&wl->lock);
 862                 brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
 863                         (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
 864                          sta->ht_cap.ampdu_factor)) - 1);
 865                 spin_unlock_bh(&wl->lock);
 866                 /* Power save wakeup */
 867                 break;
 868         default:
 869                 brcms_err(wl->wlc->hw->d11core,
 870                           "%s: Invalid command, ignoring\n", __func__);
 871         }
 872
 873         return 0;
 874 }
 875
 876 static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
 877 {
 878         struct brcms_info *wl = hw->priv;
 879         bool blocked;
 880
 881         spin_lock_bh(&wl->lock);
 882         blocked = brcms_c_check_radio_disabled(wl->wlc);
 883         spin_unlock_bh(&wl->lock);
 884
 885         wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
 886 }
 887
 888 static bool brcms_tx_flush_completed(struct brcms_info *wl)
 889 {
 890         bool result;
 891
 892         spin_lock_bh(&wl->lock);
 893         result = brcms_c_tx_flush_completed(wl->wlc);
 894         spin_unlock_bh(&wl->lock);
 895         return result;
 896 }
 897
 898 static void brcms_ops_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
 899 {
 900         struct brcms_info *wl = hw->priv;
 901         int ret;
 902
 903         no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
 904
 905         ret = wait_event_timeout(wl->tx_flush_wq,
 906                                  brcms_tx_flush_completed(wl),
 907                                  msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
 908
 909         brcms_dbg_mac80211(wl->wlc->hw->d11core,
 910                            "ret=%d\n", jiffies_to_msecs(ret));
 911 }
 912
 913 static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
 914 {
 915         struct brcms_info *wl = hw->priv;
 916         u64 tsf;
 917
 918         spin_lock_bh(&wl->lock);
 919         tsf = brcms_c_tsf_get(wl->wlc);
 920         spin_unlock_bh(&wl->lock);
 921
 922         return tsf;
 923 }
 924
 925 static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
 926                            struct ieee80211_vif *vif, u64 tsf)
 927 {
 928         struct brcms_info *wl = hw->priv;
 929
 930         spin_lock_bh(&wl->lock);
 931         brcms_c_tsf_set(wl->wlc, tsf);
 932         spin_unlock_bh(&wl->lock);
 933 }
 934
 935 static const struct ieee80211_ops brcms_ops = {
 936         .tx = brcms_ops_tx,
 937         .start = brcms_ops_start,
 938         .stop = brcms_ops_stop,
 939         .add_interface = brcms_ops_add_interface,
 940         .remove_interface = brcms_ops_remove_interface,
 941         .config = brcms_ops_config,
 942         .bss_info_changed = brcms_ops_bss_info_changed,
 943         .configure_filter = brcms_ops_configure_filter,
 944         .sw_scan_start = brcms_ops_sw_scan_start,
 945         .sw_scan_complete = brcms_ops_sw_scan_complete,
 946         .conf_tx = brcms_ops_conf_tx,
 947         .sta_add = brcms_ops_sta_add,
 948         .ampdu_action = brcms_ops_ampdu_action,
 949         .rfkill_poll = brcms_ops_rfkill_poll,
 950         .flush = brcms_ops_flush,
 951         .get_tsf = brcms_ops_get_tsf,
 952         .set_tsf = brcms_ops_set_tsf,
 953 };
 954
 955 void brcms_dpc(unsigned long data)
 956 {
 957         struct brcms_info *wl;
 958
 959         wl = (struct brcms_info *) data;
 960
 961         spin_lock_bh(&wl->lock);
 962
 963         /* call the common second level interrupt handler */
 964         if (wl->pub->up) {
 965                 if (wl->resched) {
 966                         unsigned long flags;
 967
 968                         spin_lock_irqsave(&wl->isr_lock, flags);
 969                         brcms_c_intrsupd(wl->wlc);
 970                         spin_unlock_irqrestore(&wl->isr_lock, flags);
 971                 }
 972
 973                 wl->resched = brcms_c_dpc(wl->wlc, true);
 974         }
 975
 976         /* brcms_c_dpc() may bring the driver down */
 977         if (!wl->pub->up)
 978                 goto done;
 979
 980         /* re-schedule dpc */
 981         if (wl->resched)
 982                 tasklet_schedule(&wl->tasklet);
 983         else
 984                 /* re-enable interrupts */
 985                 brcms_intrson(wl);
 986
 987  done:
 988         spin_unlock_bh(&wl->lock);
 989         wake_up(&wl->tx_flush_wq);
 990 }
 991
 992 static irqreturn_t brcms_isr(int irq, void *dev_id)
 993 {
 994         struct brcms_info *wl;
 995         irqreturn_t ret = IRQ_NONE;
 996
 997         wl = (struct brcms_info *) dev_id;
 998
 999         spin_lock(&wl->isr_lock);
1000
1001         /* call common first level interrupt handler */
1002         if (brcms_c_isr(wl->wlc)) {
1003                 /* schedule second level handler */
1004                 tasklet_schedule(&wl->tasklet);
1005                 ret = IRQ_HANDLED;
1006         }
1007
1008         spin_unlock(&wl->isr_lock);
1009
1010         return ret;
1011 }
1012
1013 /*
1014  * is called in brcms_pci_probe() context, therefore no locking required.
1015  */
1016 static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1017 {
1018         struct brcms_info *wl = hw->priv;
1019         struct brcms_c_info *wlc = wl->wlc;
1020         struct ieee80211_supported_band *band;
1021         int has_5g = 0;
1022         u16 phy_type;
1023
1024         hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
1025         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1026
1027         phy_type = brcms_c_get_phy_type(wl->wlc, 0);
1028         if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1029                 band = &wlc->bandstate[BAND_2G_INDEX]->band;
1030                 *band = brcms_band_2GHz_nphy_template;
1031                 if (phy_type == PHY_TYPE_LCN) {
1032                         /* Single stream */
1033                         band->ht_cap.mcs.rx_mask[1] = 0;
1034                         band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
1035                 }
1036                 hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
1037         } else {
1038                 return -EPERM;
1039         }
1040
1041         /* Assume all bands use the same phy.  True for 11n devices. */
1042         if (wl->pub->_nbands > 1) {
1043                 has_5g++;
1044                 if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1045                         band = &wlc->bandstate[BAND_5G_INDEX]->band;
1046                         *band = brcms_band_5GHz_nphy_template;
1047                         hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
1048                 } else {
1049                         return -EPERM;
1050                 }
1051         }
1052         return 0;
1053 }
1054
1055 /*
1056  * is called in brcms_pci_probe() context, therefore no locking required.
1057  */
1058 static int ieee_hw_init(struct ieee80211_hw *hw)
1059 {
1060         hw->flags = IEEE80211_HW_SIGNAL_DBM
1061             /* | IEEE80211_HW_CONNECTION_MONITOR  What is this? */
1062             | IEEE80211_HW_REPORTS_TX_ACK_STATUS
1063             | IEEE80211_HW_AMPDU_AGGREGATION;
1064
1065         hw->extra_tx_headroom = brcms_c_get_header_len();
1066         hw->queues = N_TX_QUEUES;
1067         hw->max_rates = 2;      /* Primary rate and 1 fallback rate */
1068
1069         /* channel change time is dependent on chip and band  */
1070         hw->channel_change_time = 7 * 1000;
1071         hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1072                                      BIT(NL80211_IFTYPE_AP) |
1073                                      BIT(NL80211_IFTYPE_ADHOC);
1074
1075         /*
1076          * deactivate sending probe responses by ucude, because this will
1077          * cause problems when WPS is used.
1078          *
1079          * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
1080          */
1081
1082         hw->rate_control_algorithm = "minstrel_ht";
1083
1084         hw->sta_data_size = 0;
1085         return ieee_hw_rate_init(hw);
1086 }
1087
1088 /**
1089  * attach to the WL device.
1090  *
1091  * Attach to the WL device identified by vendor and device parameters.
1092  * regs is a host accessible memory address pointing to WL device registers.
1093  *
1094  * brcms_attach is not defined as static because in the case where no bus
1095  * is defined, wl_attach will never be called, and thus, gcc will issue
1096  * a warning that this function is defined but not used if we declare
1097  * it as static.
1098  *
1099  *
1100  * is called in brcms_bcma_probe() context, therefore no locking required.
1101  */
1102 static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1103 {
1104         struct brcms_info *wl = NULL;
1105         int unit, err;
1106         struct ieee80211_hw *hw;
1107         u8 perm[ETH_ALEN];
1108
1109         unit = n_adapters_found;
1110         err = 0;
1111
1112         if (unit < 0)
1113                 return NULL;
1114
1115         /* allocate private info */
1116         hw = bcma_get_drvdata(pdev);
1117         if (hw != NULL)
1118                 wl = hw->priv;
1119         if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1120                 return NULL;
1121         wl->wiphy = hw->wiphy;
1122
1123         atomic_set(&wl->callbacks, 0);
1124
1125         init_waitqueue_head(&wl->tx_flush_wq);
1126
1127         /* setup the bottom half handler */
1128         tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
1129
1130         spin_lock_init(&wl->lock);
1131         spin_lock_init(&wl->isr_lock);
1132
1133         /* common load-time initialization */
1134         wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1135         if (!wl->wlc) {
1136                 wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1137                           KBUILD_MODNAME, err);
1138                 goto fail;
1139         }
1140         wl->pub = brcms_c_pub(wl->wlc);
1141
1142         wl->pub->ieee_hw = hw;
1143
1144         /* register our interrupt handler */
1145         if (request_irq(pdev->irq, brcms_isr,
1146                         IRQF_SHARED, KBUILD_MODNAME, wl)) {
1147                 wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1148                 goto fail;
1149         }
1150         wl->irq = pdev->irq;
1151
1152         /* register module */
1153         brcms_c_module_register(wl->pub, "linux", wl, NULL);
1154
1155         if (ieee_hw_init(hw)) {
1156                 wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1157                           __func__);
1158                 goto fail;
1159         }
1160
1161         brcms_c_regd_init(wl->wlc);
1162
1163         memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1164         if (WARN_ON(!is_valid_ether_addr(perm)))
1165                 goto fail;
1166         SET_IEEE80211_PERM_ADDR(hw, perm);
1167
1168         err = ieee80211_register_hw(hw);
1169         if (err)
1170                 wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1171                           "%d\n", __func__, err);
1172
1173         if (wl->pub->srom_ccode[0] &&
1174             regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1175                 wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1176
1177         brcms_debugfs_attach(wl->pub);
1178         brcms_debugfs_create_files(wl->pub);
1179         n_adapters_found++;
1180         return wl;
1181
1182 fail:
1183         brcms_free(wl);
1184         return NULL;
1185 }
1186
1187
1188
1189 /**
1190  * determines if a device is a WL device, and if so, attaches it.
1191  *
1192  * This function determines if a device pointed to by pdev is a WL device,
1193  * and if so, performs a brcms_attach() on it.
1194  *
1195  * Perimeter lock is initialized in the course of this function.
1196  */
1197 static int brcms_bcma_probe(struct bcma_device *pdev)
1198 {
1199         struct brcms_info *wl;
1200         struct ieee80211_hw *hw;
1201
1202         dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1203                  pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1204                  pdev->irq);
1205
1206         if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1207             (pdev->id.id != BCMA_CORE_80211))
1208                 return -ENODEV;
1209
1210         hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1211         if (!hw) {
1212                 pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1213                 return -ENOMEM;
1214         }
1215
1216         SET_IEEE80211_DEV(hw, &pdev->dev);
1217
1218         bcma_set_drvdata(pdev, hw);
1219
1220         memset(hw->priv, 0, sizeof(*wl));
1221
1222         wl = brcms_attach(pdev);
1223         if (!wl) {
1224                 pr_err("%s: brcms_attach failed!\n", __func__);
1225                 return -ENODEV;
1226         }
1227         brcms_led_register(wl);
1228
1229         return 0;
1230 }
1231
1232 static int brcms_suspend(struct bcma_device *pdev)
1233 {
1234         struct brcms_info *wl;
1235         struct ieee80211_hw *hw;
1236
1237         hw = bcma_get_drvdata(pdev);
1238         wl = hw->priv;
1239         if (!wl) {
1240                 pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1241                        __func__);
1242                 return -ENODEV;
1243         }
1244
1245         /* only need to flag hw is down for proper resume */
1246         spin_lock_bh(&wl->lock);
1247         wl->pub->hw_up = false;
1248         spin_unlock_bh(&wl->lock);
1249
1250         brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1251
1252         return 0;
1253 }
1254
1255 static int brcms_resume(struct bcma_device *pdev)
1256 {
1257         return 0;
1258 }
1259
1260 static struct bcma_driver brcms_bcma_driver = {
1261         .name     = KBUILD_MODNAME,
1262         .probe    = brcms_bcma_probe,
1263         .suspend  = brcms_suspend,
1264         .resume   = brcms_resume,
1265         .remove   = brcms_remove,
1266         .id_table = brcms_coreid_table,
1267 };
1268
1269 /**
1270  * This is the main entry point for the brcmsmac driver.
1271  *
1272  * This function is scheduled upon module initialization and
1273  * does the driver registration, which result in brcms_bcma_probe()
1274  * call resulting in the driver bringup.
1275  */
1276 static void brcms_driver_init(struct work_struct *work)
1277 {
1278         int error;
1279
1280         error = bcma_driver_register(&brcms_bcma_driver);
1281         if (error)
1282                 pr_err("%s: register returned %d\n", __func__, error);
1283 }
1284
1285 static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1286
1287 static int __init brcms_module_init(void)
1288 {
1289         brcms_debugfs_init();
1290         if (!schedule_work(&brcms_driver_work))
1291                 return -EBUSY;
1292
1293         return 0;
1294 }
1295
1296 /**
1297  * This function unloads the brcmsmac driver from the system.
1298  *
1299  * This function unconditionally unloads the brcmsmac driver module from the
1300  * system.
1301  *
1302  */
1303 static void __exit brcms_module_exit(void)
1304 {
1305         cancel_work_sync(&brcms_driver_work);
1306         bcma_driver_unregister(&brcms_bcma_driver);
1307         brcms_debugfs_exit();
1308 }
1309
1310 module_init(brcms_module_init);
1311 module_exit(brcms_module_exit);
1312
1313 /*
1314  * precondition: perimeter lock has been acquired
1315  */
1316 void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1317                          bool state, int prio)
1318 {
1319         brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1320 }
1321
1322 /*
1323  * precondition: perimeter lock has been acquired
1324  */
1325 void brcms_init(struct brcms_info *wl)
1326 {
1327         brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1328                        wl->pub->unit);
1329         brcms_reset(wl);
1330         brcms_c_init(wl->wlc, wl->mute_tx);
1331 }
1332
1333 /*
1334  * precondition: perimeter lock has been acquired
1335  */
1336 uint brcms_reset(struct brcms_info *wl)
1337 {
1338         brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1339         brcms_c_reset(wl->wlc);
1340
1341         /* dpc will not be rescheduled */
1342         wl->resched = false;
1343
1344         /* inform publicly that interface is down */
1345         wl->pub->up = false;
1346
1347         return 0;
1348 }
1349
1350 void brcms_fatal_error(struct brcms_info *wl)
1351 {
1352         brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1353                   wl->wlc->pub->unit);
1354         brcms_reset(wl);
1355         ieee80211_restart_hw(wl->pub->ieee_hw);
1356 }
1357
1358 /*
1359  * These are interrupt on/off entry points. Disable interrupts
1360  * during interrupt state transition.
1361  */
1362 void brcms_intrson(struct brcms_info *wl)
1363 {
1364         unsigned long flags;
1365
1366         spin_lock_irqsave(&wl->isr_lock, flags);
1367         brcms_c_intrson(wl->wlc);
1368         spin_unlock_irqrestore(&wl->isr_lock, flags);
1369 }
1370
1371 u32 brcms_intrsoff(struct brcms_info *wl)
1372 {
1373         unsigned long flags;
1374         u32 status;
1375
1376         spin_lock_irqsave(&wl->isr_lock, flags);
1377         status = brcms_c_intrsoff(wl->wlc);
1378         spin_unlock_irqrestore(&wl->isr_lock, flags);
1379         return status;
1380 }
1381
1382 void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1383 {
1384         unsigned long flags;
1385
1386         spin_lock_irqsave(&wl->isr_lock, flags);
1387         brcms_c_intrsrestore(wl->wlc, macintmask);
1388         spin_unlock_irqrestore(&wl->isr_lock, flags);
1389 }
1390
1391 /*
1392  * precondition: perimeter lock has been acquired
1393  */
1394 int brcms_up(struct brcms_info *wl)
1395 {
1396         int error = 0;
1397
1398         if (wl->pub->up)
1399                 return 0;
1400
1401         error = brcms_c_up(wl->wlc);
1402
1403         return error;
1404 }
1405
1406 /*
1407  * precondition: perimeter lock has been acquired
1408  */
1409 void brcms_down(struct brcms_info *wl)
1410 {
1411         uint callbacks, ret_val = 0;
1412
1413         /* call common down function */
1414         ret_val = brcms_c_down(wl->wlc);
1415         callbacks = atomic_read(&wl->callbacks) - ret_val;
1416
1417         /* wait for down callbacks to complete */
1418         spin_unlock_bh(&wl->lock);
1419
1420         /* For HIGH_only driver, it's important to actually schedule other work,
1421          * not just spin wait since everything runs at schedule level
1422          */
1423         SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1424
1425         spin_lock_bh(&wl->lock);
1426 }
1427
1428 /*
1429 * precondition: perimeter lock is not acquired
1430  */
1431 static void _brcms_timer(struct work_struct *work)
1432 {
1433         struct brcms_timer *t = container_of(work, struct brcms_timer,
1434                                              dly_wrk.work);
1435
1436         spin_lock_bh(&t->wl->lock);
1437
1438         if (t->set) {
1439                 if (t->periodic) {
1440                         atomic_inc(&t->wl->callbacks);
1441                         ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1442                                                      &t->dly_wrk,
1443                                                      msecs_to_jiffies(t->ms));
1444                 } else {
1445                         t->set = false;
1446                 }
1447
1448                 t->fn(t->arg);
1449         }
1450
1451         atomic_dec(&t->wl->callbacks);
1452
1453         spin_unlock_bh(&t->wl->lock);
1454 }
1455
1456 /*
1457  * Adds a timer to the list. Caller supplies a timer function.
1458  * Is called from wlc.
1459  *
1460  * precondition: perimeter lock has been acquired
1461  */
1462 struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1463                                      void (*fn) (void *arg),
1464                                      void *arg, const char *name)
1465 {
1466         struct brcms_timer *t;
1467
1468         t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1469         if (!t)
1470                 return NULL;
1471
1472         INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1473         t->wl = wl;
1474         t->fn = fn;
1475         t->arg = arg;
1476         t->next = wl->timers;
1477         wl->timers = t;
1478
1479 #ifdef DEBUG
1480         t->name = kmalloc(strlen(name) + 1, GFP_ATOMIC);
1481         if (t->name)
1482                 strcpy(t->name, name);
1483 #endif
1484
1485         return t;
1486 }
1487
1488 /*
1489  * adds only the kernel timer since it's going to be more accurate
1490  * as well as it's easier to make it periodic
1491  *
1492  * precondition: perimeter lock has been acquired
1493  */
1494 void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1495 {
1496         struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1497
1498 #ifdef DEBUG
1499         if (t->set)
1500                 brcms_dbg_info(t->wl->wlc->hw->d11core,
1501                                "%s: Already set. Name: %s, per %d\n",
1502                                __func__, t->name, periodic);
1503 #endif
1504         t->ms = ms;
1505         t->periodic = (bool) periodic;
1506         if (!t->set) {
1507                 t->set = true;
1508                 atomic_inc(&t->wl->callbacks);
1509         }
1510
1511         ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1512 }
1513
1514 /*
1515  * return true if timer successfully deleted, false if still pending
1516  *
1517  * precondition: perimeter lock has been acquired
1518  */
1519 bool brcms_del_timer(struct brcms_timer *t)
1520 {
1521         if (t->set) {
1522                 t->set = false;
1523                 if (!cancel_delayed_work(&t->dly_wrk))
1524                         return false;
1525
1526                 atomic_dec(&t->wl->callbacks);
1527         }
1528
1529         return true;
1530 }
1531
1532 /*
1533  * precondition: perimeter lock has been acquired
1534  */
1535 void brcms_free_timer(struct brcms_timer *t)
1536 {
1537         struct brcms_info *wl = t->wl;
1538         struct brcms_timer *tmp;
1539
1540         /* delete the timer in case it is active */
1541         brcms_del_timer(t);
1542
1543         if (wl->timers == t) {
1544                 wl->timers = wl->timers->next;
1545 #ifdef DEBUG
1546                 kfree(t->name);
1547 #endif
1548                 kfree(t);
1549                 return;
1550
1551         }
1552
1553         tmp = wl->timers;
1554         while (tmp) {
1555                 if (tmp->next == t) {
1556                         tmp->next = t->next;
1557 #ifdef DEBUG
1558                         kfree(t->name);
1559 #endif
1560                         kfree(t);
1561                         return;
1562                 }
1563                 tmp = tmp->next;
1564         }
1565
1566 }
1567
1568 /*
1569  * precondition: perimeter lock has been acquired
1570  */
1571 int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1572 {
1573         int i, entry;
1574         const u8 *pdata;
1575         struct firmware_hdr *hdr;
1576         for (i = 0; i < wl->fw.fw_cnt; i++) {
1577                 hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1578                 for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1579                      entry++, hdr++) {
1580                         u32 len = le32_to_cpu(hdr->len);
1581                         if (le32_to_cpu(hdr->idx) == idx) {
1582                                 pdata = wl->fw.fw_bin[i]->data +
1583                                         le32_to_cpu(hdr->offset);
1584                                 *pbuf = kmemdup(pdata, len, GFP_ATOMIC);
1585                                 if (*pbuf == NULL)
1586                                         goto fail;
1587
1588                                 return 0;
1589                         }
1590                 }
1591         }
1592         brcms_err(wl->wlc->hw->d11core,
1593                   "ERROR: ucode buf tag:%d can not be found!\n", idx);
1594         *pbuf = NULL;
1595 fail:
1596         return -ENODATA;
1597 }
1598
1599 /*
1600  * Precondition: Since this function is called in brcms_bcma_probe() context,
1601  * no locking is required.
1602  */
1603 int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1604 {
1605         int i, entry;
1606         const u8 *pdata;
1607         struct firmware_hdr *hdr;
1608         for (i = 0; i < wl->fw.fw_cnt; i++) {
1609                 hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1610                 for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1611                      entry++, hdr++) {
1612                         if (le32_to_cpu(hdr->idx) == idx) {
1613                                 pdata = wl->fw.fw_bin[i]->data +
1614                                         le32_to_cpu(hdr->offset);
1615                                 if (le32_to_cpu(hdr->len) != 4) {
1616                                         brcms_err(wl->wlc->hw->d11core,
1617                                                   "ERROR: fw hdr len\n");
1618                                         return -ENOMSG;
1619                                 }
1620                                 *n_bytes = le32_to_cpu(*((__le32 *) pdata));
1621                                 return 0;
1622                         }
1623                 }
1624         }
1625         brcms_err(wl->wlc->hw->d11core,
1626                   "ERROR: ucode tag:%d can not be found!\n", idx);
1627         return -ENOMSG;
1628 }
1629
1630 /*
1631  * precondition: can both be called locked and unlocked
1632  */
1633 void brcms_ucode_free_buf(void *p)
1634 {
1635         kfree(p);
1636 }
1637
1638 /*
1639  * checks validity of all firmware images loaded from user space
1640  *
1641  * Precondition: Since this function is called in brcms_bcma_probe() context,
1642  * no locking is required.
1643  */
1644 int brcms_check_firmwares(struct brcms_info *wl)
1645 {
1646         int i;
1647         int entry;
1648         int rc = 0;
1649         const struct firmware *fw;
1650         const struct firmware *fw_hdr;
1651         struct firmware_hdr *ucode_hdr;
1652         for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1653                 fw =  wl->fw.fw_bin[i];
1654                 fw_hdr = wl->fw.fw_hdr[i];
1655                 if (fw == NULL && fw_hdr == NULL) {
1656                         break;
1657                 } else if (fw == NULL || fw_hdr == NULL) {
1658                         wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1659                                   __func__);
1660                         rc = -EBADF;
1661                 } else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1662                         wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1663                                 "size %zu/%zu\n", __func__, fw_hdr->size,
1664                                 sizeof(struct firmware_hdr));
1665                         rc = -EBADF;
1666                 } else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1667                         wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1668                                   __func__, fw->size);
1669                         rc = -EBADF;
1670                 } else {
1671                         /* check if ucode section overruns firmware image */
1672                         ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1673                         for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1674                              !rc; entry++, ucode_hdr++) {
1675                                 if (le32_to_cpu(ucode_hdr->offset) +
1676                                     le32_to_cpu(ucode_hdr->len) >
1677                                     fw->size) {
1678                                         wiphy_err(wl->wiphy,
1679                                                   "%s: conflicting bin/hdr\n",
1680                                                   __func__);
1681                                         rc = -EBADF;
1682                                 }
1683                         }
1684                 }
1685         }
1686         if (rc == 0 && wl->fw.fw_cnt != i) {
1687                 wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1688                         wl->fw.fw_cnt);
1689                 rc = -EBADF;
1690         }
1691         return rc;
1692 }
1693
1694 /*
1695  * precondition: perimeter lock has been acquired
1696  */
1697 bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1698 {
1699         bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1700
1701         spin_unlock_bh(&wl->lock);
1702         wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1703         if (blocked)
1704                 wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1705         spin_lock_bh(&wl->lock);
1706         return blocked;
1707 }