drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c

   1 /*
   2  * Copyright (c) 2010 Broadcom Corporation
   3  *
   4  * Permission to use, copy, modify, and/or distribute this software for any
   5  * purpose with or without fee is hereby granted, provided that the above
   6  * copyright notice and this permission notice appear in all copies.
   7  *
   8  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   9  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  10  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  11  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  12  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  13  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  14  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  15  */
  16
  17 #include <linux/types.h>
  18 #include <linux/atomic.h>
  19 #include <linux/kernel.h>
  20 #include <linux/kthread.h>
  21 #include <linux/printk.h>
  22 #include <linux/pci_ids.h>
  23 #include <linux/netdevice.h>
  24 #include <linux/interrupt.h>
  25 #include <linux/sched/signal.h>
  26 #include <linux/mmc/sdio.h>
  27 #include <linux/mmc/sdio_ids.h>
  28 #include <linux/mmc/sdio_func.h>
  29 #include <linux/mmc/card.h>
  30 #include <linux/semaphore.h>
  31 #include <linux/firmware.h>
  32 #include <linux/module.h>
  33 #include <linux/bcma/bcma.h>
  34 #include <linux/debugfs.h>
  35 #include <linux/vmalloc.h>
  36 #include <asm/unaligned.h>
  37 #include <defs.h>
  38 #include <brcmu_wifi.h>
  39 #include <brcmu_utils.h>
  40 #include <brcm_hw_ids.h>
  41 #include <soc.h>
  42 #include "sdio.h"
  43 #include "chip.h"
  44 #include "firmware.h"
  45 #include "core.h"
  46 #include "common.h"
  47 #include "bcdc.h"
  48
  49 #define DCMD_RESP_TIMEOUT       msecs_to_jiffies(2500)
  50 #define CTL_DONE_TIMEOUT        msecs_to_jiffies(2500)
  51
  52 #ifdef DEBUG
  53
  54 #define BRCMF_TRAP_INFO_SIZE    80
  55
  56 #define CBUF_LEN        (128)
  57
  58 /* Device console log buffer state */
  59 #define CONSOLE_BUFFER_MAX      2024
  60
  61 struct rte_log_le {
  62         __le32 buf;             /* Can't be pointer on (64-bit) hosts */
  63         __le32 buf_size;
  64         __le32 idx;
  65         char *_buf_compat;      /* Redundant pointer for backward compat. */
  66 };
  67
  68 struct rte_console {
  69         /* Virtual UART
  70          * When there is no UART (e.g. Quickturn),
  71          * the host should write a complete
  72          * input line directly into cbuf and then write
  73          * the length into vcons_in.
  74          * This may also be used when there is a real UART
  75          * (at risk of conflicting with
  76          * the real UART).  vcons_out is currently unused.
  77          */
  78         uint vcons_in;
  79         uint vcons_out;
  80
  81         /* Output (logging) buffer
  82          * Console output is written to a ring buffer log_buf at index log_idx.
  83          * The host may read the output when it sees log_idx advance.
  84          * Output will be lost if the output wraps around faster than the host
  85          * polls.
  86          */
  87         struct rte_log_le log_le;
  88
  89         /* Console input line buffer
  90          * Characters are read one at a time into cbuf
  91          * until <CR> is received, then
  92          * the buffer is processed as a command line.
  93          * Also used for virtual UART.
  94          */
  95         uint cbuf_idx;
  96         char cbuf[CBUF_LEN];
  97 };
  98
  99 #endif                          /* DEBUG */
 100 #include <chipcommon.h>
 101
 102 #include "bus.h"
 103 #include "debug.h"
 104 #include "tracepoint.h"
 105
 106 #define TXQLEN          2048    /* bulk tx queue length */
 107 #define TXHI            (TXQLEN - 256)  /* turn on flow control above TXHI */
 108 #define TXLOW           (TXHI - 256)    /* turn off flow control below TXLOW */
 109 #define PRIOMASK        7
 110
 111 #define TXRETRIES       2       /* # of retries for tx frames */
 112
 113 #define BRCMF_RXBOUND   50      /* Default for max rx frames in
 114                                  one scheduling */
 115
 116 #define BRCMF_TXBOUND   20      /* Default for max tx frames in
 117                                  one scheduling */
 118
 119 #define BRCMF_TXMINMAX  1       /* Max tx frames if rx still pending */
 120
 121 #define MEMBLOCK        2048    /* Block size used for downloading
 122                                  of dongle image */
 123 #define MAX_DATA_BUF    (32 * 1024)     /* Must be large enough to hold
 124                                  biggest possible glom */
 125
 126 #define BRCMF_FIRSTREAD (1 << 6)
 127
 128 #define BRCMF_CONSOLE   10      /* watchdog interval to poll console */
 129
 130 /* SBSDIO_DEVICE_CTL */
 131
 132 /* 1: device will assert busy signal when receiving CMD53 */
 133 #define SBSDIO_DEVCTL_SETBUSY           0x01
 134 /* 1: assertion of sdio interrupt is synchronous to the sdio clock */
 135 #define SBSDIO_DEVCTL_SPI_INTR_SYNC     0x02
 136 /* 1: mask all interrupts to host except the chipActive (rev 8) */
 137 #define SBSDIO_DEVCTL_CA_INT_ONLY       0x04
 138 /* 1: isolate internal sdio signals, put external pads in tri-state; requires
 139  * sdio bus power cycle to clear (rev 9) */
 140 #define SBSDIO_DEVCTL_PADS_ISO          0x08
 141 /* Force SD->SB reset mapping (rev 11) */
 142 #define SBSDIO_DEVCTL_SB_RST_CTL        0x30
 143 /*   Determined by CoreControl bit */
 144 #define SBSDIO_DEVCTL_RST_CORECTL       0x00
 145 /*   Force backplane reset */
 146 #define SBSDIO_DEVCTL_RST_BPRESET       0x10
 147 /*   Force no backplane reset */
 148 #define SBSDIO_DEVCTL_RST_NOBPRESET     0x20
 149
 150 /* direct(mapped) cis space */
 151
 152 /* MAPPED common CIS address */
 153 #define SBSDIO_CIS_BASE_COMMON          0x1000
 154 /* maximum bytes in one CIS */
 155 #define SBSDIO_CIS_SIZE_LIMIT           0x200
 156 /* cis offset addr is < 17 bits */
 157 #define SBSDIO_CIS_OFT_ADDR_MASK        0x1FFFF
 158
 159 /* manfid tuple length, include tuple, link bytes */
 160 #define SBSDIO_CIS_MANFID_TUPLE_LEN     6
 161
 162 #define CORE_BUS_REG(base, field) \
 163                 (base + offsetof(struct sdpcmd_regs, field))
 164
 165 /* SDIO function 1 register CHIPCLKCSR */
 166 /* Force ALP request to backplane */
 167 #define SBSDIO_FORCE_ALP                0x01
 168 /* Force HT request to backplane */
 169 #define SBSDIO_FORCE_HT                 0x02
 170 /* Force ILP request to backplane */
 171 #define SBSDIO_FORCE_ILP                0x04
 172 /* Make ALP ready (power up xtal) */
 173 #define SBSDIO_ALP_AVAIL_REQ            0x08
 174 /* Make HT ready (power up PLL) */
 175 #define SBSDIO_HT_AVAIL_REQ             0x10
 176 /* Squelch clock requests from HW */
 177 #define SBSDIO_FORCE_HW_CLKREQ_OFF      0x20
 178 /* Status: ALP is ready */
 179 #define SBSDIO_ALP_AVAIL                0x40
 180 /* Status: HT is ready */
 181 #define SBSDIO_HT_AVAIL                 0x80
 182 #define SBSDIO_CSR_MASK                 0x1F
 183 #define SBSDIO_AVBITS           (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
 184 #define SBSDIO_ALPAV(regval)    ((regval) & SBSDIO_AVBITS)
 185 #define SBSDIO_HTAV(regval)     (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
 186 #define SBSDIO_ALPONLY(regval)  (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
 187 #define SBSDIO_CLKAV(regval, alponly) \
 188         (SBSDIO_ALPAV(regval) && (alponly ? 1 : SBSDIO_HTAV(regval)))
 189
 190 /* intstatus */
 191 #define I_SMB_SW0       (1 << 0)        /* To SB Mail S/W interrupt 0 */
 192 #define I_SMB_SW1       (1 << 1)        /* To SB Mail S/W interrupt 1 */
 193 #define I_SMB_SW2       (1 << 2)        /* To SB Mail S/W interrupt 2 */
 194 #define I_SMB_SW3       (1 << 3)        /* To SB Mail S/W interrupt 3 */
 195 #define I_SMB_SW_MASK   0x0000000f      /* To SB Mail S/W interrupts mask */
 196 #define I_SMB_SW_SHIFT  0       /* To SB Mail S/W interrupts shift */
 197 #define I_HMB_SW0       (1 << 4)        /* To Host Mail S/W interrupt 0 */
 198 #define I_HMB_SW1       (1 << 5)        /* To Host Mail S/W interrupt 1 */
 199 #define I_HMB_SW2       (1 << 6)        /* To Host Mail S/W interrupt 2 */
 200 #define I_HMB_SW3       (1 << 7)        /* To Host Mail S/W interrupt 3 */
 201 #define I_HMB_SW_MASK   0x000000f0      /* To Host Mail S/W interrupts mask */
 202 #define I_HMB_SW_SHIFT  4       /* To Host Mail S/W interrupts shift */
 203 #define I_WR_OOSYNC     (1 << 8)        /* Write Frame Out Of Sync */
 204 #define I_RD_OOSYNC     (1 << 9)        /* Read Frame Out Of Sync */
 205 #define I_PC            (1 << 10)       /* descriptor error */
 206 #define I_PD            (1 << 11)       /* data error */
 207 #define I_DE            (1 << 12)       /* Descriptor protocol Error */
 208 #define I_RU            (1 << 13)       /* Receive descriptor Underflow */
 209 #define I_RO            (1 << 14)       /* Receive fifo Overflow */
 210 #define I_XU            (1 << 15)       /* Transmit fifo Underflow */
 211 #define I_RI            (1 << 16)       /* Receive Interrupt */
 212 #define I_BUSPWR        (1 << 17)       /* SDIO Bus Power Change (rev 9) */
 213 #define I_XMTDATA_AVAIL (1 << 23)       /* bits in fifo */
 214 #define I_XI            (1 << 24)       /* Transmit Interrupt */
 215 #define I_RF_TERM       (1 << 25)       /* Read Frame Terminate */
 216 #define I_WF_TERM       (1 << 26)       /* Write Frame Terminate */
 217 #define I_PCMCIA_XU     (1 << 27)       /* PCMCIA Transmit FIFO Underflow */
 218 #define I_SBINT         (1 << 28)       /* sbintstatus Interrupt */
 219 #define I_CHIPACTIVE    (1 << 29)       /* chip from doze to active state */
 220 #define I_SRESET        (1 << 30)       /* CCCR RES interrupt */
 221 #define I_IOE2          (1U << 31)      /* CCCR IOE2 Bit Changed */
 222 #define I_ERRORS        (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU)
 223 #define I_DMA           (I_RI | I_XI | I_ERRORS)
 224
 225 /* corecontrol */
 226 #define CC_CISRDY               (1 << 0)        /* CIS Ready */
 227 #define CC_BPRESEN              (1 << 1)        /* CCCR RES signal */
 228 #define CC_F2RDY                (1 << 2)        /* set CCCR IOR2 bit */
 229 #define CC_CLRPADSISO           (1 << 3)        /* clear SDIO pads isolation */
 230 #define CC_XMTDATAAVAIL_MODE    (1 << 4)
 231 #define CC_XMTDATAAVAIL_CTRL    (1 << 5)
 232
 233 /* SDA_FRAMECTRL */
 234 #define SFC_RF_TERM     (1 << 0)        /* Read Frame Terminate */
 235 #define SFC_WF_TERM     (1 << 1)        /* Write Frame Terminate */
 236 #define SFC_CRC4WOOS    (1 << 2)        /* CRC error for write out of sync */
 237 #define SFC_ABORTALL    (1 << 3)        /* Abort all in-progress frames */
 238
 239 /*
 240  * Software allocation of To SB Mailbox resources
 241  */
 242
 243 /* tosbmailbox bits corresponding to intstatus bits */
 244 #define SMB_NAK         (1 << 0)        /* Frame NAK */
 245 #define SMB_INT_ACK     (1 << 1)        /* Host Interrupt ACK */
 246 #define SMB_USE_OOB     (1 << 2)        /* Use OOB Wakeup */
 247 #define SMB_DEV_INT     (1 << 3)        /* Miscellaneous Interrupt */
 248
 249 /* tosbmailboxdata */
 250 #define SMB_DATA_VERSION_SHIFT  16      /* host protocol version */
 251
 252 /*
 253  * Software allocation of To Host Mailbox resources
 254  */
 255
 256 /* intstatus bits */
 257 #define I_HMB_FC_STATE  I_HMB_SW0       /* Flow Control State */
 258 #define I_HMB_FC_CHANGE I_HMB_SW1       /* Flow Control State Changed */
 259 #define I_HMB_FRAME_IND I_HMB_SW2       /* Frame Indication */
 260 #define I_HMB_HOST_INT  I_HMB_SW3       /* Miscellaneous Interrupt */
 261
 262 /* tohostmailboxdata */
 263 #define HMB_DATA_NAKHANDLED     1       /* retransmit NAK'd frame */
 264 #define HMB_DATA_DEVREADY       2       /* talk to host after enable */
 265 #define HMB_DATA_FC             4       /* per prio flowcontrol update flag */
 266 #define HMB_DATA_FWREADY        8       /* fw ready for protocol activity */
 267
 268 #define HMB_DATA_FCDATA_MASK    0xff000000
 269 #define HMB_DATA_FCDATA_SHIFT   24
 270
 271 #define HMB_DATA_VERSION_MASK   0x00ff0000
 272 #define HMB_DATA_VERSION_SHIFT  16
 273
 274 /*
 275  * Software-defined protocol header
 276  */
 277
 278 /* Current protocol version */
 279 #define SDPCM_PROT_VERSION      4
 280
 281 /*
 282  * Shared structure between dongle and the host.
 283  * The structure contains pointers to trap or assert information.
 284  */
 285 #define SDPCM_SHARED_VERSION       0x0003
 286 #define SDPCM_SHARED_VERSION_MASK  0x00FF
 287 #define SDPCM_SHARED_ASSERT_BUILT  0x0100
 288 #define SDPCM_SHARED_ASSERT        0x0200
 289 #define SDPCM_SHARED_TRAP          0x0400
 290
 291 /* Space for header read, limit for data packets */
 292 #define MAX_HDR_READ    (1 << 6)
 293 #define MAX_RX_DATASZ   2048
 294
 295 /* Bump up limit on waiting for HT to account for first startup;
 296  * if the image is doing a CRC calculation before programming the PMU
 297  * for HT availability, it could take a couple hundred ms more, so
 298  * max out at a 1 second (1000000us).
 299  */
 300 #undef PMU_MAX_TRANSITION_DLY
 301 #define PMU_MAX_TRANSITION_DLY 1000000
 302
 303 /* Value for ChipClockCSR during initial setup */
 304 #define BRCMF_INIT_CLKCTL1      (SBSDIO_FORCE_HW_CLKREQ_OFF |   \
 305                                         SBSDIO_ALP_AVAIL_REQ)
 306
 307 /* Flags for SDH calls */
 308 #define F2SYNC  (SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
 309
 310 #define BRCMF_IDLE_ACTIVE       0       /* Do not request any SD clock change
 311                                          * when idle
 312                                          */
 313 #define BRCMF_IDLE_INTERVAL     1
 314
 315 #define KSO_WAIT_US 50
 316 #define MAX_KSO_ATTEMPTS (PMU_MAX_TRANSITION_DLY/KSO_WAIT_US)
 317 #define BRCMF_SDIO_MAX_ACCESS_ERRORS    5
 318
 319 /*
 320  * Conversion of 802.1D priority to precedence level
 321  */
 322 static uint prio2prec(u32 prio)
 323 {
 324         return (prio == PRIO_8021D_NONE || prio == PRIO_8021D_BE) ?
 325                (prio^2) : prio;
 326 }
 327
 328 #ifdef DEBUG
 329 /* Device console log buffer state */
 330 struct brcmf_console {
 331         uint count;             /* Poll interval msec counter */
 332         uint log_addr;          /* Log struct address (fixed) */
 333         struct rte_log_le log_le;       /* Log struct (host copy) */
 334         uint bufsize;           /* Size of log buffer */
 335         u8 *buf;                /* Log buffer (host copy) */
 336         uint last;              /* Last buffer read index */
 337 };
 338
 339 struct brcmf_trap_info {
 340         __le32          type;
 341         __le32          epc;
 342         __le32          cpsr;
 343         __le32          spsr;
 344         __le32          r0;     /* a1 */
 345         __le32          r1;     /* a2 */
 346         __le32          r2;     /* a3 */
 347         __le32          r3;     /* a4 */
 348         __le32          r4;     /* v1 */
 349         __le32          r5;     /* v2 */
 350         __le32          r6;     /* v3 */
 351         __le32          r7;     /* v4 */
 352         __le32          r8;     /* v5 */
 353         __le32          r9;     /* sb/v6 */
 354         __le32          r10;    /* sl/v7 */
 355         __le32          r11;    /* fp/v8 */
 356         __le32          r12;    /* ip */
 357         __le32          r13;    /* sp */
 358         __le32          r14;    /* lr */
 359         __le32          pc;     /* r15 */
 360 };
 361 #endif                          /* DEBUG */
 362
 363 struct sdpcm_shared {
 364         u32 flags;
 365         u32 trap_addr;
 366         u32 assert_exp_addr;
 367         u32 assert_file_addr;
 368         u32 assert_line;
 369         u32 console_addr;       /* Address of struct rte_console */
 370         u32 msgtrace_addr;
 371         u8 tag[32];
 372         u32 brpt_addr;
 373 };
 374
 375 struct sdpcm_shared_le {
 376         __le32 flags;
 377         __le32 trap_addr;
 378         __le32 assert_exp_addr;
 379         __le32 assert_file_addr;
 380         __le32 assert_line;
 381         __le32 console_addr;    /* Address of struct rte_console */
 382         __le32 msgtrace_addr;
 383         u8 tag[32];
 384         __le32 brpt_addr;
 385 };
 386
 387 /* dongle SDIO bus specific header info */
 388 struct brcmf_sdio_hdrinfo {
 389         u8 seq_num;
 390         u8 channel;
 391         u16 len;
 392         u16 len_left;
 393         u16 len_nxtfrm;
 394         u8 dat_offset;
 395         bool lastfrm;
 396         u16 tail_pad;
 397 };
 398
 399 /*
 400  * hold counter variables
 401  */
 402 struct brcmf_sdio_count {
 403         uint intrcount;         /* Count of device interrupt callbacks */
 404         uint lastintrs;         /* Count as of last watchdog timer */
 405         uint pollcnt;           /* Count of active polls */
 406         uint regfails;          /* Count of R_REG failures */
 407         uint tx_sderrs;         /* Count of tx attempts with sd errors */
 408         uint fcqueued;          /* Tx packets that got queued */
 409         uint rxrtx;             /* Count of rtx requests (NAK to dongle) */
 410         uint rx_toolong;        /* Receive frames too long to receive */
 411         uint rxc_errors;        /* SDIO errors when reading control frames */
 412         uint rx_hdrfail;        /* SDIO errors on header reads */
 413         uint rx_badhdr;         /* Bad received headers (roosync?) */
 414         uint rx_badseq;         /* Mismatched rx sequence number */
 415         uint fc_rcvd;           /* Number of flow-control events received */
 416         uint fc_xoff;           /* Number which turned on flow-control */
 417         uint fc_xon;            /* Number which turned off flow-control */
 418         uint rxglomfail;        /* Failed deglom attempts */
 419         uint rxglomframes;      /* Number of glom frames (superframes) */
 420         uint rxglompkts;        /* Number of packets from glom frames */
 421         uint f2rxhdrs;          /* Number of header reads */
 422         uint f2rxdata;          /* Number of frame data reads */
 423         uint f2txdata;          /* Number of f2 frame writes */
 424         uint f1regdata;         /* Number of f1 register accesses */
 425         uint tickcnt;           /* Number of watchdog been schedule */
 426         ulong tx_ctlerrs;       /* Err of sending ctrl frames */
 427         ulong tx_ctlpkts;       /* Ctrl frames sent to dongle */
 428         ulong rx_ctlerrs;       /* Err of processing rx ctrl frames */
 429         ulong rx_ctlpkts;       /* Ctrl frames processed from dongle */
 430         ulong rx_readahead_cnt; /* packets where header read-ahead was used */
 431 };
 432
 433 /* misc chip info needed by some of the routines */
 434 /* Private data for SDIO bus interaction */
 435 struct brcmf_sdio {
 436         struct brcmf_sdio_dev *sdiodev; /* sdio device handler */
 437         struct brcmf_chip *ci;  /* Chip info struct */
 438
 439         u32 hostintmask;        /* Copy of Host Interrupt Mask */
 440         atomic_t intstatus;     /* Intstatus bits (events) pending */
 441         atomic_t fcstate;       /* State of dongle flow-control */
 442
 443         uint blocksize;         /* Block size of SDIO transfers */
 444         uint roundup;           /* Max roundup limit */
 445
 446         struct pktq txq;        /* Queue length used for flow-control */
 447         u8 flowcontrol; /* per prio flow control bitmask */
 448         u8 tx_seq;              /* Transmit sequence number (next) */
 449         u8 tx_max;              /* Maximum transmit sequence allowed */
 450
 451         u8 *hdrbuf;             /* buffer for handling rx frame */
 452         u8 *rxhdr;              /* Header of current rx frame (in hdrbuf) */
 453         u8 rx_seq;              /* Receive sequence number (expected) */
 454         struct brcmf_sdio_hdrinfo cur_read;
 455                                 /* info of current read frame */
 456         bool rxskip;            /* Skip receive (awaiting NAK ACK) */
 457         bool rxpending;         /* Data frame pending in dongle */
 458
 459         uint rxbound;           /* Rx frames to read before resched */
 460         uint txbound;           /* Tx frames to send before resched */
 461         uint txminmax;
 462
 463         struct sk_buff *glomd;  /* Packet containing glomming descriptor */
 464         struct sk_buff_head glom; /* Packet list for glommed superframe */
 465
 466         u8 *rxbuf;              /* Buffer for receiving control packets */
 467         uint rxblen;            /* Allocated length of rxbuf */
 468         u8 *rxctl;              /* Aligned pointer into rxbuf */
 469         u8 *rxctl_orig;         /* pointer for freeing rxctl */
 470         uint rxlen;             /* Length of valid data in buffer */
 471         spinlock_t rxctl_lock;  /* protection lock for ctrl frame resources */
 472
 473         u8 sdpcm_ver;   /* Bus protocol reported by dongle */
 474
 475         bool intr;              /* Use interrupts */
 476         bool poll;              /* Use polling */
 477         atomic_t ipend;         /* Device interrupt is pending */
 478         uint spurious;          /* Count of spurious interrupts */
 479         uint pollrate;          /* Ticks between device polls */
 480         uint polltick;          /* Tick counter */
 481
 482 #ifdef DEBUG
 483         uint console_interval;
 484         struct brcmf_console console;   /* Console output polling support */
 485         uint console_addr;      /* Console address from shared struct */
 486 #endif                          /* DEBUG */
 487
 488         uint clkstate;          /* State of sd and backplane clock(s) */
 489         s32 idletime;           /* Control for activity timeout */
 490         s32 idlecount;          /* Activity timeout counter */
 491         s32 idleclock;          /* How to set bus driver when idle */
 492         bool rxflow_mode;       /* Rx flow control mode */
 493         bool rxflow;            /* Is rx flow control on */
 494         bool alp_only;          /* Don't use HT clock (ALP only) */
 495
 496         u8 *ctrl_frame_buf;
 497         u16 ctrl_frame_len;
 498         bool ctrl_frame_stat;
 499         int ctrl_frame_err;
 500
 501         spinlock_t txq_lock;            /* protect bus->txq */
 502         wait_queue_head_t ctrl_wait;
 503         wait_queue_head_t dcmd_resp_wait;
 504
 505         struct timer_list timer;
 506         struct completion watchdog_wait;
 507         struct task_struct *watchdog_tsk;
 508         bool wd_active;
 509
 510         struct workqueue_struct *brcmf_wq;
 511         struct work_struct datawork;
 512         bool dpc_triggered;
 513         bool dpc_running;
 514
 515         bool txoff;             /* Transmit flow-controlled */
 516         struct brcmf_sdio_count sdcnt;
 517         bool sr_enabled; /* SaveRestore enabled */
 518         bool sleeping;
 519
 520         u8 tx_hdrlen;           /* sdio bus header length for tx packet */
 521         bool txglom;            /* host tx glomming enable flag */
 522         u16 head_align;         /* buffer pointer alignment */
 523         u16 sgentry_align;      /* scatter-gather buffer alignment */
 524 };
 525
 526 /* clkstate */
 527 #define CLK_NONE        0
 528 #define CLK_SDONLY      1
 529 #define CLK_PENDING     2
 530 #define CLK_AVAIL       3
 531
 532 #ifdef DEBUG
 533 static int qcount[NUMPRIO];
 534 #endif                          /* DEBUG */
 535
 536 #define DEFAULT_SDIO_DRIVE_STRENGTH     6       /* in milliamps */
 537
 538 #define RETRYCHAN(chan) ((chan) == SDPCM_EVENT_CHANNEL)
 539
 540 /* Limit on rounding up frames */
 541 static const uint max_roundup = 512;
 542
 543 #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT
 544 #define ALIGNMENT  8
 545 #else
 546 #define ALIGNMENT  4
 547 #endif
 548
 549 enum brcmf_sdio_frmtype {
 550         BRCMF_SDIO_FT_NORMAL,
 551         BRCMF_SDIO_FT_SUPER,
 552         BRCMF_SDIO_FT_SUB,
 553 };
 554
 555 #define SDIOD_DRVSTR_KEY(chip, pmu)     (((chip) << 16) | (pmu))
 556
 557 /* SDIO Pad drive strength to select value mappings */
 558 struct sdiod_drive_str {
 559         u8 strength;    /* Pad Drive Strength in mA */
 560         u8 sel;         /* Chip-specific select value */
 561 };
 562
 563 /* SDIO Drive Strength to sel value table for PMU Rev 11 (1.8V) */
 564 static const struct sdiod_drive_str sdiod_drvstr_tab1_1v8[] = {
 565         {32, 0x6},
 566         {26, 0x7},
 567         {22, 0x4},
 568         {16, 0x5},
 569         {12, 0x2},
 570         {8, 0x3},
 571         {4, 0x0},
 572         {0, 0x1}
 573 };
 574
 575 /* SDIO Drive Strength to sel value table for PMU Rev 13 (1.8v) */
 576 static const struct sdiod_drive_str sdiod_drive_strength_tab5_1v8[] = {
 577         {6, 0x7},
 578         {5, 0x6},
 579         {4, 0x5},
 580         {3, 0x4},
 581         {2, 0x2},
 582         {1, 0x1},
 583         {0, 0x0}
 584 };
 585
 586 /* SDIO Drive Strength to sel value table for PMU Rev 17 (1.8v) */
 587 static const struct sdiod_drive_str sdiod_drvstr_tab6_1v8[] = {
 588         {3, 0x3},
 589         {2, 0x2},
 590         {1, 0x1},
 591         {0, 0x0} };
 592
 593 /* SDIO Drive Strength to sel value table for 43143 PMU Rev 17 (3.3V) */
 594 static const struct sdiod_drive_str sdiod_drvstr_tab2_3v3[] = {
 595         {16, 0x7},
 596         {12, 0x5},
 597         {8,  0x3},
 598         {4,  0x1}
 599 };
 600
 601 BRCMF_FW_NVRAM_DEF(43143, "brcmfmac43143-sdio.bin", "brcmfmac43143-sdio.txt");
 602 BRCMF_FW_NVRAM_DEF(43241B0, "brcmfmac43241b0-sdio.bin",
 603                    "brcmfmac43241b0-sdio.txt");
 604 BRCMF_FW_NVRAM_DEF(43241B4, "brcmfmac43241b4-sdio.bin",
 605                    "brcmfmac43241b4-sdio.txt");
 606 BRCMF_FW_NVRAM_DEF(43241B5, "brcmfmac43241b5-sdio.bin",
 607                    "brcmfmac43241b5-sdio.txt");
 608 BRCMF_FW_NVRAM_DEF(4329, "brcmfmac4329-sdio.bin", "brcmfmac4329-sdio.txt");
 609 BRCMF_FW_NVRAM_DEF(4330, "brcmfmac4330-sdio.bin", "brcmfmac4330-sdio.txt");
 610 BRCMF_FW_NVRAM_DEF(4334, "brcmfmac4334-sdio.bin", "brcmfmac4334-sdio.txt");
 611 BRCMF_FW_NVRAM_DEF(43340, "brcmfmac43340-sdio.bin", "brcmfmac43340-sdio.txt");
 612 BRCMF_FW_NVRAM_DEF(4335, "brcmfmac4335-sdio.bin", "brcmfmac4335-sdio.txt");
 613 BRCMF_FW_NVRAM_DEF(43362, "brcmfmac43362-sdio.bin", "brcmfmac43362-sdio.txt");
 614 BRCMF_FW_NVRAM_DEF(4339, "brcmfmac4339-sdio.bin", "brcmfmac4339-sdio.txt");
 615 BRCMF_FW_NVRAM_DEF(43430A0, "brcmfmac43430a0-sdio.bin", "brcmfmac43430a0-sdio.txt");
 616 /* Note the names are not postfixed with a1 for backward compatibility */
 617 BRCMF_FW_NVRAM_DEF(43430A1, "brcmfmac43430-sdio.bin", "brcmfmac43430-sdio.txt");
 618 BRCMF_FW_NVRAM_DEF(43455, "brcmfmac43455-sdio.bin", "brcmfmac43455-sdio.txt");
 619 BRCMF_FW_NVRAM_DEF(4354, "brcmfmac4354-sdio.bin", "brcmfmac4354-sdio.txt");
 620 BRCMF_FW_NVRAM_DEF(4356, "brcmfmac4356-sdio.bin", "brcmfmac4356-sdio.txt");
 621
 622 static struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
 623         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43143_CHIP_ID, 0xFFFFFFFF, 43143),
 624         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0x0000001F, 43241B0),
 625         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0x00000020, 43241B4),
 626         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43241_CHIP_ID, 0xFFFFFFC0, 43241B5),
 627         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4329_CHIP_ID, 0xFFFFFFFF, 4329),
 628         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330),
 629         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334),
 630         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340),
 631         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340),
 632         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335),
 633         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362),
 634         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),
 635         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0x00000001, 43430A0),
 636         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_43430_CHIP_ID, 0xFFFFFFFE, 43430A1),
 637         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4345_CHIP_ID, 0xFFFFFFC0, 43455),
 638         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4354_CHIP_ID, 0xFFFFFFFF, 4354),
 639         BRCMF_FW_NVRAM_ENTRY(BRCM_CC_4356_CHIP_ID, 0xFFFFFFFF, 4356)
 640 };
 641
 642 static void pkt_align(struct sk_buff *p, int len, int align)
 643 {
 644         uint datalign;
 645         datalign = (unsigned long)(p->data);
 646         datalign = roundup(datalign, (align)) - datalign;
 647         if (datalign)
 648                 skb_pull(p, datalign);
 649         __skb_trim(p, len);
 650 }
 651
 652 /* To check if there's window offered */
 653 static bool data_ok(struct brcmf_sdio *bus)
 654 {
 655         return (u8)(bus->tx_max - bus->tx_seq) != 0 &&
 656                ((u8)(bus->tx_max - bus->tx_seq) & 0x80) == 0;
 657 }
 658
 659 /*
 660  * Reads a register in the SDIO hardware block. This block occupies a series of
 661  * adresses on the 32 bit backplane bus.
 662  */
 663 static int r_sdreg32(struct brcmf_sdio *bus, u32 *regvar, u32 offset)
 664 {
 665         struct brcmf_core *core;
 666         int ret;
 667
 668         core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 669         *regvar = brcmf_sdiod_regrl(bus->sdiodev, core->base + offset, &ret);
 670
 671         return ret;
 672 }
 673
 674 static int w_sdreg32(struct brcmf_sdio *bus, u32 regval, u32 reg_offset)
 675 {
 676         struct brcmf_core *core;
 677         int ret;
 678
 679         core = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
 680         brcmf_sdiod_regwl(bus->sdiodev, core->base + reg_offset, regval, &ret);
 681
 682         return ret;
 683 }
 684
 685 static int
 686 brcmf_sdio_kso_control(struct brcmf_sdio *bus, bool on)
 687 {
 688         u8 wr_val = 0, rd_val, cmp_val, bmask;
 689         int err = 0;
 690         int err_cnt = 0;
 691         int try_cnt = 0;
 692
 693         brcmf_dbg(TRACE, "Enter: on=%d\n", on);
 694
 695         wr_val = (on << SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
 696         /* 1st KSO write goes to AOS wake up core if device is asleep  */
 697         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 698                           wr_val, &err);
 699
 700         if (on) {
 701                 /* device WAKEUP through KSO:
 702                  * write bit 0 & read back until
 703                  * both bits 0 (kso bit) & 1 (dev on status) are set
 704                  */
 705                 cmp_val = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK |
 706                           SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK;
 707                 bmask = cmp_val;
 708                 usleep_range(2000, 3000);
 709         } else {
 710                 /* Put device to sleep, turn off KSO */
 711                 cmp_val = 0;
 712                 /* only check for bit0, bit1(dev on status) may not
 713                  * get cleared right away
 714                  */
 715                 bmask = SBSDIO_FUNC1_SLEEPCSR_KSO_MASK;
 716         }
 717
 718         do {
 719                 /* reliable KSO bit set/clr:
 720                  * the sdiod sleep write access is synced to PMU 32khz clk
 721                  * just one write attempt may fail,
 722                  * read it back until it matches written value
 723                  */
 724                 rd_val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 725                                            &err);
 726                 if (!err) {
 727                         if ((rd_val & bmask) == cmp_val)
 728                                 break;
 729                         err_cnt = 0;
 730                 }
 731                 /* bail out upon subsequent access errors */
 732                 if (err && (err_cnt++ > BRCMF_SDIO_MAX_ACCESS_ERRORS))
 733                         break;
 734                 udelay(KSO_WAIT_US);
 735                 brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
 736                                   wr_val, &err);
 737         } while (try_cnt++ < MAX_KSO_ATTEMPTS);
 738
 739         if (try_cnt > 2)
 740                 brcmf_dbg(SDIO, "try_cnt=%d rd_val=0x%x err=%d\n", try_cnt,
 741                           rd_val, err);
 742
 743         if (try_cnt > MAX_KSO_ATTEMPTS)
 744                 brcmf_err("max tries: rd_val=0x%x err=%d\n", rd_val, err);
 745
 746         return err;
 747 }
 748
 749 #define HOSTINTMASK             (I_HMB_SW_MASK | I_CHIPACTIVE)
 750
 751 /* Turn backplane clock on or off */
 752 static int brcmf_sdio_htclk(struct brcmf_sdio *bus, bool on, bool pendok)
 753 {
 754         int err;
 755         u8 clkctl, clkreq, devctl;
 756         unsigned long timeout;
 757
 758         brcmf_dbg(SDIO, "Enter\n");
 759
 760         clkctl = 0;
 761
 762         if (bus->sr_enabled) {
 763                 bus->clkstate = (on ? CLK_AVAIL : CLK_SDONLY);
 764                 return 0;
 765         }
 766
 767         if (on) {
 768                 /* Request HT Avail */
 769                 clkreq =
 770                     bus->alp_only ? SBSDIO_ALP_AVAIL_REQ : SBSDIO_HT_AVAIL_REQ;
 771
 772                 brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 773                                   clkreq, &err);
 774                 if (err) {
 775                         brcmf_err("HT Avail request error: %d\n", err);
 776                         return -EBADE;
 777                 }
 778
 779                 /* Check current status */
 780                 clkctl = brcmf_sdiod_regrb(bus->sdiodev,
 781                                            SBSDIO_FUNC1_CHIPCLKCSR, &err);
 782                 if (err) {
 783                         brcmf_err("HT Avail read error: %d\n", err);
 784                         return -EBADE;
 785                 }
 786
 787                 /* Go to pending and await interrupt if appropriate */
 788                 if (!SBSDIO_CLKAV(clkctl, bus->alp_only) && pendok) {
 789                         /* Allow only clock-available interrupt */
 790                         devctl = brcmf_sdiod_regrb(bus->sdiodev,
 791                                                    SBSDIO_DEVICE_CTL, &err);
 792                         if (err) {
 793                                 brcmf_err("Devctl error setting CA: %d\n",
 794                                           err);
 795                                 return -EBADE;
 796                         }
 797
 798                         devctl |= SBSDIO_DEVCTL_CA_INT_ONLY;
 799                         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 800                                           devctl, &err);
 801                         brcmf_dbg(SDIO, "CLKCTL: set PENDING\n");
 802                         bus->clkstate = CLK_PENDING;
 803
 804                         return 0;
 805                 } else if (bus->clkstate == CLK_PENDING) {
 806                         /* Cancel CA-only interrupt filter */
 807                         devctl = brcmf_sdiod_regrb(bus->sdiodev,
 808                                                    SBSDIO_DEVICE_CTL, &err);
 809                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 810                         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 811                                           devctl, &err);
 812                 }
 813
 814                 /* Otherwise, wait here (polling) for HT Avail */
 815                 timeout = jiffies +
 816                           msecs_to_jiffies(PMU_MAX_TRANSITION_DLY/1000);
 817                 while (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
 818                         clkctl = brcmf_sdiod_regrb(bus->sdiodev,
 819                                                    SBSDIO_FUNC1_CHIPCLKCSR,
 820                                                    &err);
 821                         if (time_after(jiffies, timeout))
 822                                 break;
 823                         else
 824                                 usleep_range(5000, 10000);
 825                 }
 826                 if (err) {
 827                         brcmf_err("HT Avail request error: %d\n", err);
 828                         return -EBADE;
 829                 }
 830                 if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
 831                         brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n",
 832                                   PMU_MAX_TRANSITION_DLY, clkctl);
 833                         return -EBADE;
 834                 }
 835
 836                 /* Mark clock available */
 837                 bus->clkstate = CLK_AVAIL;
 838                 brcmf_dbg(SDIO, "CLKCTL: turned ON\n");
 839
 840 #if defined(DEBUG)
 841                 if (!bus->alp_only) {
 842                         if (SBSDIO_ALPONLY(clkctl))
 843                                 brcmf_err("HT Clock should be on\n");
 844                 }
 845 #endif                          /* defined (DEBUG) */
 846
 847         } else {
 848                 clkreq = 0;
 849
 850                 if (bus->clkstate == CLK_PENDING) {
 851                         /* Cancel CA-only interrupt filter */
 852                         devctl = brcmf_sdiod_regrb(bus->sdiodev,
 853                                                    SBSDIO_DEVICE_CTL, &err);
 854                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
 855                         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
 856                                           devctl, &err);
 857                 }
 858
 859                 bus->clkstate = CLK_SDONLY;
 860                 brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
 861                                   clkreq, &err);
 862                 brcmf_dbg(SDIO, "CLKCTL: turned OFF\n");
 863                 if (err) {
 864                         brcmf_err("Failed access turning clock off: %d\n",
 865                                   err);
 866                         return -EBADE;
 867                 }
 868         }
 869         return 0;
 870 }
 871
 872 /* Change idle/active SD state */
 873 static int brcmf_sdio_sdclk(struct brcmf_sdio *bus, bool on)
 874 {
 875         brcmf_dbg(SDIO, "Enter\n");
 876
 877         if (on)
 878                 bus->clkstate = CLK_SDONLY;
 879         else
 880                 bus->clkstate = CLK_NONE;
 881
 882         return 0;
 883 }
 884
 885 /* Transition SD and backplane clock readiness */
 886 static int brcmf_sdio_clkctl(struct brcmf_sdio *bus, uint target, bool pendok)
 887 {
 888 #ifdef DEBUG
 889         uint oldstate = bus->clkstate;
 890 #endif                          /* DEBUG */
 891
 892         brcmf_dbg(SDIO, "Enter\n");
 893
 894         /* Early exit if we're already there */
 895         if (bus->clkstate == target)
 896                 return 0;
 897
 898         switch (target) {
 899         case CLK_AVAIL:
 900                 /* Make sure SD clock is available */
 901                 if (bus->clkstate == CLK_NONE)
 902                         brcmf_sdio_sdclk(bus, true);
 903                 /* Now request HT Avail on the backplane */
 904                 brcmf_sdio_htclk(bus, true, pendok);
 905                 break;
 906
 907         case CLK_SDONLY:
 908                 /* Remove HT request, or bring up SD clock */
 909                 if (bus->clkstate == CLK_NONE)
 910                         brcmf_sdio_sdclk(bus, true);
 911                 else if (bus->clkstate == CLK_AVAIL)
 912                         brcmf_sdio_htclk(bus, false, false);
 913                 else
 914                         brcmf_err("request for %d -> %d\n",
 915                                   bus->clkstate, target);
 916                 break;
 917
 918         case CLK_NONE:
 919                 /* Make sure to remove HT request */
 920                 if (bus->clkstate == CLK_AVAIL)
 921                         brcmf_sdio_htclk(bus, false, false);
 922                 /* Now remove the SD clock */
 923                 brcmf_sdio_sdclk(bus, false);
 924                 break;
 925         }
 926 #ifdef DEBUG
 927         brcmf_dbg(SDIO, "%d -> %d\n", oldstate, bus->clkstate);
 928 #endif                          /* DEBUG */
 929
 930         return 0;
 931 }
 932
 933 static int
 934 brcmf_sdio_bus_sleep(struct brcmf_sdio *bus, bool sleep, bool pendok)
 935 {
 936         int err = 0;
 937         u8 clkcsr;
 938
 939         brcmf_dbg(SDIO, "Enter: request %s currently %s\n",
 940                   (sleep ? "SLEEP" : "WAKE"),
 941                   (bus->sleeping ? "SLEEP" : "WAKE"));
 942
 943         /* If SR is enabled control bus state with KSO */
 944         if (bus->sr_enabled) {
 945                 /* Done if we're already in the requested state */
 946                 if (sleep == bus->sleeping)
 947                         goto end;
 948
 949                 /* Going to sleep */
 950                 if (sleep) {
 951                         clkcsr = brcmf_sdiod_regrb(bus->sdiodev,
 952                                                    SBSDIO_FUNC1_CHIPCLKCSR,
 953                                                    &err);
 954                         if ((clkcsr & SBSDIO_CSR_MASK) == 0) {
 955                                 brcmf_dbg(SDIO, "no clock, set ALP\n");
 956                                 brcmf_sdiod_regwb(bus->sdiodev,
 957                                                   SBSDIO_FUNC1_CHIPCLKCSR,
 958                                                   SBSDIO_ALP_AVAIL_REQ, &err);
 959                         }
 960                         err = brcmf_sdio_kso_control(bus, false);
 961                 } else {
 962                         err = brcmf_sdio_kso_control(bus, true);
 963                 }
 964                 if (err) {
 965                         brcmf_err("error while changing bus sleep state %d\n",
 966                                   err);
 967                         goto done;
 968                 }
 969         }
 970
 971 end:
 972         /* control clocks */
 973         if (sleep) {
 974                 if (!bus->sr_enabled)
 975                         brcmf_sdio_clkctl(bus, CLK_NONE, pendok);
 976         } else {
 977                 brcmf_sdio_clkctl(bus, CLK_AVAIL, pendok);
 978                 brcmf_sdio_wd_timer(bus, true);
 979         }
 980         bus->sleeping = sleep;
 981         brcmf_dbg(SDIO, "new state %s\n",
 982                   (sleep ? "SLEEP" : "WAKE"));
 983 done:
 984         brcmf_dbg(SDIO, "Exit: err=%d\n", err);
 985         return err;
 986
 987 }
 988
 989 #ifdef DEBUG
 990 static inline bool brcmf_sdio_valid_shared_address(u32 addr)
 991 {
 992         return !(addr == 0 || ((~addr >> 16) & 0xffff) == (addr & 0xffff));
 993 }
 994
 995 static int brcmf_sdio_readshared(struct brcmf_sdio *bus,
 996                                  struct sdpcm_shared *sh)
 997 {
 998         u32 addr = 0;
 999         int rv;
1000         u32 shaddr = 0;
1001         struct sdpcm_shared_le sh_le;
1002         __le32 addr_le;
1003
1004         sdio_claim_host(bus->sdiodev->func[1]);
1005         brcmf_sdio_bus_sleep(bus, false, false);
1006
1007         /*
1008          * Read last word in socram to determine
1009          * address of sdpcm_shared structure
1010          */
1011         shaddr = bus->ci->rambase + bus->ci->ramsize - 4;
1012         if (!bus->ci->rambase && brcmf_chip_sr_capable(bus->ci))
1013                 shaddr -= bus->ci->srsize;
1014         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, shaddr,
1015                                (u8 *)&addr_le, 4);
1016         if (rv < 0)
1017                 goto fail;
1018
1019         /*
1020          * Check if addr is valid.
1021          * NVRAM length at the end of memory should have been overwritten.
1022          */
1023         addr = le32_to_cpu(addr_le);
1024         if (!brcmf_sdio_valid_shared_address(addr)) {
1025                 brcmf_err("invalid sdpcm_shared address 0x%08X\n", addr);
1026                 rv = -EINVAL;
1027                 goto fail;
1028         }
1029
1030         brcmf_dbg(INFO, "sdpcm_shared address 0x%08X\n", addr);
1031
1032         /* Read hndrte_shared structure */
1033         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&sh_le,
1034                                sizeof(struct sdpcm_shared_le));
1035         if (rv < 0)
1036                 goto fail;
1037
1038         sdio_release_host(bus->sdiodev->func[1]);
1039
1040         /* Endianness */
1041         sh->flags = le32_to_cpu(sh_le.flags);
1042         sh->trap_addr = le32_to_cpu(sh_le.trap_addr);
1043         sh->assert_exp_addr = le32_to_cpu(sh_le.assert_exp_addr);
1044         sh->assert_file_addr = le32_to_cpu(sh_le.assert_file_addr);
1045         sh->assert_line = le32_to_cpu(sh_le.assert_line);
1046         sh->console_addr = le32_to_cpu(sh_le.console_addr);
1047         sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
1048
1049         if ((sh->flags & SDPCM_SHARED_VERSION_MASK) > SDPCM_SHARED_VERSION) {
1050                 brcmf_err("sdpcm shared version unsupported: dhd %d dongle %d\n",
1051                           SDPCM_SHARED_VERSION,
1052                           sh->flags & SDPCM_SHARED_VERSION_MASK);
1053                 return -EPROTO;
1054         }
1055         return 0;
1056
1057 fail:
1058         brcmf_err("unable to obtain sdpcm_shared info: rv=%d (addr=0x%x)\n",
1059                   rv, addr);
1060         sdio_release_host(bus->sdiodev->func[1]);
1061         return rv;
1062 }
1063
1064 static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
1065 {
1066         struct sdpcm_shared sh;
1067
1068         if (brcmf_sdio_readshared(bus, &sh) == 0)
1069                 bus->console_addr = sh.console_addr;
1070 }
1071 #else
1072 static void brcmf_sdio_get_console_addr(struct brcmf_sdio *bus)
1073 {
1074 }
1075 #endif /* DEBUG */
1076
1077 static u32 brcmf_sdio_hostmail(struct brcmf_sdio *bus)
1078 {
1079         u32 intstatus = 0;
1080         u32 hmb_data;
1081         u8 fcbits;
1082         int ret;
1083
1084         brcmf_dbg(SDIO, "Enter\n");
1085
1086         /* Read mailbox data and ack that we did so */
1087         ret = r_sdreg32(bus, &hmb_data,
1088                         offsetof(struct sdpcmd_regs, tohostmailboxdata));
1089
1090         if (ret == 0)
1091                 w_sdreg32(bus, SMB_INT_ACK,
1092                           offsetof(struct sdpcmd_regs, tosbmailbox));
1093         bus->sdcnt.f1regdata += 2;
1094
1095         /* Dongle recomposed rx frames, accept them again */
1096         if (hmb_data & HMB_DATA_NAKHANDLED) {
1097                 brcmf_dbg(SDIO, "Dongle reports NAK handled, expect rtx of %d\n",
1098                           bus->rx_seq);
1099                 if (!bus->rxskip)
1100                         brcmf_err("unexpected NAKHANDLED!\n");
1101
1102                 bus->rxskip = false;
1103                 intstatus |= I_HMB_FRAME_IND;
1104         }
1105
1106         /*
1107          * DEVREADY does not occur with gSPI.
1108          */
1109         if (hmb_data & (HMB_DATA_DEVREADY | HMB_DATA_FWREADY)) {
1110                 bus->sdpcm_ver =
1111                     (hmb_data & HMB_DATA_VERSION_MASK) >>
1112                     HMB_DATA_VERSION_SHIFT;
1113                 if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
1114                         brcmf_err("Version mismatch, dongle reports %d, "
1115                                   "expecting %d\n",
1116                                   bus->sdpcm_ver, SDPCM_PROT_VERSION);
1117                 else
1118                         brcmf_dbg(SDIO, "Dongle ready, protocol version %d\n",
1119                                   bus->sdpcm_ver);
1120
1121                 /*
1122                  * Retrieve console state address now that firmware should have
1123                  * updated it.
1124                  */
1125                 brcmf_sdio_get_console_addr(bus);
1126         }
1127
1128         /*
1129          * Flow Control has been moved into the RX headers and this out of band
1130          * method isn't used any more.
1131          * remaining backward compatible with older dongles.
1132          */
1133         if (hmb_data & HMB_DATA_FC) {
1134                 fcbits = (hmb_data & HMB_DATA_FCDATA_MASK) >>
1135                                                         HMB_DATA_FCDATA_SHIFT;
1136
1137                 if (fcbits & ~bus->flowcontrol)
1138                         bus->sdcnt.fc_xoff++;
1139
1140                 if (bus->flowcontrol & ~fcbits)
1141                         bus->sdcnt.fc_xon++;
1142
1143                 bus->sdcnt.fc_rcvd++;
1144                 bus->flowcontrol = fcbits;
1145         }
1146
1147         /* Shouldn't be any others */
1148         if (hmb_data & ~(HMB_DATA_DEVREADY |
1149                          HMB_DATA_NAKHANDLED |
1150                          HMB_DATA_FC |
1151                          HMB_DATA_FWREADY |
1152                          HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK))
1153                 brcmf_err("Unknown mailbox data content: 0x%02x\n",
1154                           hmb_data);
1155
1156         return intstatus;
1157 }
1158
1159 static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
1160 {
1161         uint retries = 0;
1162         u16 lastrbc;
1163         u8 hi, lo;
1164         int err;
1165
1166         brcmf_err("%sterminate frame%s\n",
1167                   abort ? "abort command, " : "",
1168                   rtx ? ", send NAK" : "");
1169
1170         if (abort)
1171                 brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
1172
1173         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL,
1174                           SFC_RF_TERM, &err);
1175         bus->sdcnt.f1regdata++;
1176
1177         /* Wait until the packet has been flushed (device/FIFO stable) */
1178         for (lastrbc = retries = 0xffff; retries > 0; retries--) {
1179                 hi = brcmf_sdiod_regrb(bus->sdiodev,
1180                                        SBSDIO_FUNC1_RFRAMEBCHI, &err);
1181                 lo = brcmf_sdiod_regrb(bus->sdiodev,
1182                                        SBSDIO_FUNC1_RFRAMEBCLO, &err);
1183                 bus->sdcnt.f1regdata += 2;
1184
1185                 if ((hi == 0) && (lo == 0))
1186                         break;
1187
1188                 if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
1189                         brcmf_err("count growing: last 0x%04x now 0x%04x\n",
1190                                   lastrbc, (hi << 8) + lo);
1191                 }
1192                 lastrbc = (hi << 8) + lo;
1193         }
1194
1195         if (!retries)
1196                 brcmf_err("count never zeroed: last 0x%04x\n", lastrbc);
1197         else
1198                 brcmf_dbg(SDIO, "flush took %d iterations\n", 0xffff - retries);
1199
1200         if (rtx) {
1201                 bus->sdcnt.rxrtx++;
1202                 err = w_sdreg32(bus, SMB_NAK,
1203                                 offsetof(struct sdpcmd_regs, tosbmailbox));
1204
1205                 bus->sdcnt.f1regdata++;
1206                 if (err == 0)
1207                         bus->rxskip = true;
1208         }
1209
1210         /* Clear partial in any case */
1211         bus->cur_read.len = 0;
1212 }
1213
1214 static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
1215 {
1216         struct brcmf_sdio_dev *sdiodev = bus->sdiodev;
1217         u8 i, hi, lo;
1218
1219         /* On failure, abort the command and terminate the frame */
1220         brcmf_err("sdio error, abort command and terminate frame\n");
1221         bus->sdcnt.tx_sderrs++;
1222
1223         brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
1224         brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
1225         bus->sdcnt.f1regdata++;
1226
1227         for (i = 0; i < 3; i++) {
1228                 hi = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCHI, NULL);
1229                 lo = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_WFRAMEBCLO, NULL);
1230                 bus->sdcnt.f1regdata += 2;
1231                 if ((hi == 0) && (lo == 0))
1232                         break;
1233         }
1234 }
1235
1236 /* return total length of buffer chain */
1237 static uint brcmf_sdio_glom_len(struct brcmf_sdio *bus)
1238 {
1239         struct sk_buff *p;
1240         uint total;
1241
1242         total = 0;
1243         skb_queue_walk(&bus->glom, p)
1244                 total += p->len;
1245         return total;
1246 }
1247
1248 static void brcmf_sdio_free_glom(struct brcmf_sdio *bus)
1249 {
1250         struct sk_buff *cur, *next;
1251
1252         skb_queue_walk_safe(&bus->glom, cur, next) {
1253                 skb_unlink(cur, &bus->glom);
1254                 brcmu_pkt_buf_free_skb(cur);
1255         }
1256 }
1257
1258 /**
1259  * brcmfmac sdio bus specific header
1260  * This is the lowest layer header wrapped on the packets transmitted between
1261  * host and WiFi dongle which contains information needed for SDIO core and
1262  * firmware
1263  *
1264  * It consists of 3 parts: hardware header, hardware extension header and
1265  * software header
1266  * hardware header (frame tag) - 4 bytes
1267  * Byte 0~1: Frame length
1268  * Byte 2~3: Checksum, bit-wise inverse of frame length
1269  * hardware extension header - 8 bytes
1270  * Tx glom mode only, N/A for Rx or normal Tx
1271  * Byte 0~1: Packet length excluding hw frame tag
1272  * Byte 2: Reserved
1273  * Byte 3: Frame flags, bit 0: last frame indication
1274  * Byte 4~5: Reserved
1275  * Byte 6~7: Tail padding length
1276  * software header - 8 bytes
1277  * Byte 0: Rx/Tx sequence number
1278  * Byte 1: 4 MSB Channel number, 4 LSB arbitrary flag
1279  * Byte 2: Length of next data frame, reserved for Tx
1280  * Byte 3: Data offset
1281  * Byte 4: Flow control bits, reserved for Tx
1282  * Byte 5: Maximum Sequence number allowed by firmware for Tx, N/A for Tx packet
1283  * Byte 6~7: Reserved
1284  */
1285 #define SDPCM_HWHDR_LEN                 4
1286 #define SDPCM_HWEXT_LEN                 8
1287 #define SDPCM_SWHDR_LEN                 8
1288 #define SDPCM_HDRLEN                    (SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN)
1289 /* software header */
1290 #define SDPCM_SEQ_MASK                  0x000000ff
1291 #define SDPCM_SEQ_WRAP                  256
1292 #define SDPCM_CHANNEL_MASK              0x00000f00
1293 #define SDPCM_CHANNEL_SHIFT             8
1294 #define SDPCM_CONTROL_CHANNEL           0       /* Control */
1295 #define SDPCM_EVENT_CHANNEL             1       /* Asyc Event Indication */
1296 #define SDPCM_DATA_CHANNEL              2       /* Data Xmit/Recv */
1297 #define SDPCM_GLOM_CHANNEL              3       /* Coalesced packets */
1298 #define SDPCM_TEST_CHANNEL              15      /* Test/debug packets */
1299 #define SDPCM_GLOMDESC(p)               (((u8 *)p)[1] & 0x80)
1300 #define SDPCM_NEXTLEN_MASK              0x00ff0000
1301 #define SDPCM_NEXTLEN_SHIFT             16
1302 #define SDPCM_DOFFSET_MASK              0xff000000
1303 #define SDPCM_DOFFSET_SHIFT             24
1304 #define SDPCM_FCMASK_MASK               0x000000ff
1305 #define SDPCM_WINDOW_MASK               0x0000ff00
1306 #define SDPCM_WINDOW_SHIFT              8
1307
1308 static inline u8 brcmf_sdio_getdatoffset(u8 *swheader)
1309 {
1310         u32 hdrvalue;
1311         hdrvalue = *(u32 *)swheader;
1312         return (u8)((hdrvalue & SDPCM_DOFFSET_MASK) >> SDPCM_DOFFSET_SHIFT);
1313 }
1314
1315 static inline bool brcmf_sdio_fromevntchan(u8 *swheader)
1316 {
1317         u32 hdrvalue;
1318         u8 ret;
1319
1320         hdrvalue = *(u32 *)swheader;
1321         ret = (u8)((hdrvalue & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT);
1322
1323         return (ret == SDPCM_EVENT_CHANNEL);
1324 }
1325
1326 static int brcmf_sdio_hdparse(struct brcmf_sdio *bus, u8 *header,
1327                               struct brcmf_sdio_hdrinfo *rd,
1328                               enum brcmf_sdio_frmtype type)
1329 {
1330         u16 len, checksum;
1331         u8 rx_seq, fc, tx_seq_max;
1332         u32 swheader;
1333
1334         trace_brcmf_sdpcm_hdr(SDPCM_RX, header);
1335
1336         /* hw header */
1337         len = get_unaligned_le16(header);
1338         checksum = get_unaligned_le16(header + sizeof(u16));
1339         /* All zero means no more to read */
1340         if (!(len | checksum)) {
1341                 bus->rxpending = false;
1342                 return -ENODATA;
1343         }
1344         if ((u16)(~(len ^ checksum))) {
1345                 brcmf_err("HW header checksum error\n");
1346                 bus->sdcnt.rx_badhdr++;
1347                 brcmf_sdio_rxfail(bus, false, false);
1348                 return -EIO;
1349         }
1350         if (len < SDPCM_HDRLEN) {
1351                 brcmf_err("HW header length error\n");
1352                 return -EPROTO;
1353         }
1354         if (type == BRCMF_SDIO_FT_SUPER &&
1355             (roundup(len, bus->blocksize) != rd->len)) {
1356                 brcmf_err("HW superframe header length error\n");
1357                 return -EPROTO;
1358         }
1359         if (type == BRCMF_SDIO_FT_SUB && len > rd->len) {
1360                 brcmf_err("HW subframe header length error\n");
1361                 return -EPROTO;
1362         }
1363         rd->len = len;
1364
1365         /* software header */
1366         header += SDPCM_HWHDR_LEN;
1367         swheader = le32_to_cpu(*(__le32 *)header);
1368         if (type == BRCMF_SDIO_FT_SUPER && SDPCM_GLOMDESC(header)) {
1369                 brcmf_err("Glom descriptor found in superframe head\n");
1370                 rd->len = 0;
1371                 return -EINVAL;
1372         }
1373         rx_seq = (u8)(swheader & SDPCM_SEQ_MASK);
1374         rd->channel = (swheader & SDPCM_CHANNEL_MASK) >> SDPCM_CHANNEL_SHIFT;
1375         if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL &&
1376             type != BRCMF_SDIO_FT_SUPER) {
1377                 brcmf_err("HW header length too long\n");
1378                 bus->sdcnt.rx_toolong++;
1379                 brcmf_sdio_rxfail(bus, false, false);
1380                 rd->len = 0;
1381                 return -EPROTO;
1382         }
1383         if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) {
1384                 brcmf_err("Wrong channel for superframe\n");
1385                 rd->len = 0;
1386                 return -EINVAL;
1387         }
1388         if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL &&
1389             rd->channel != SDPCM_EVENT_CHANNEL) {
1390                 brcmf_err("Wrong channel for subframe\n");
1391                 rd->len = 0;
1392                 return -EINVAL;
1393         }
1394         rd->dat_offset = brcmf_sdio_getdatoffset(header);
1395         if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
1396                 brcmf_err("seq %d: bad data offset\n", rx_seq);
1397                 bus->sdcnt.rx_badhdr++;
1398                 brcmf_sdio_rxfail(bus, false, false);
1399                 rd->len = 0;
1400                 return -ENXIO;
1401         }
1402         if (rd->seq_num != rx_seq) {
1403                 brcmf_dbg(SDIO, "seq %d, expected %d\n", rx_seq, rd->seq_num);
1404                 bus->sdcnt.rx_badseq++;
1405                 rd->seq_num = rx_seq;
1406         }
1407         /* no need to check the reset for subframe */
1408         if (type == BRCMF_SDIO_FT_SUB)
1409                 return 0;
1410         rd->len_nxtfrm = (swheader & SDPCM_NEXTLEN_MASK) >> SDPCM_NEXTLEN_SHIFT;
1411         if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
1412                 /* only warm for NON glom packet */
1413                 if (rd->channel != SDPCM_GLOM_CHANNEL)
1414                         brcmf_err("seq %d: next length error\n", rx_seq);
1415                 rd->len_nxtfrm = 0;
1416         }
1417         swheader = le32_to_cpu(*(__le32 *)(header + 4));
1418         fc = swheader & SDPCM_FCMASK_MASK;
1419         if (bus->flowcontrol != fc) {
1420                 if (~bus->flowcontrol & fc)
1421                         bus->sdcnt.fc_xoff++;
1422                 if (bus->flowcontrol & ~fc)
1423                         bus->sdcnt.fc_xon++;
1424                 bus->sdcnt.fc_rcvd++;
1425                 bus->flowcontrol = fc;
1426         }
1427         tx_seq_max = (swheader & SDPCM_WINDOW_MASK) >> SDPCM_WINDOW_SHIFT;
1428         if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) {
1429                 brcmf_err("seq %d: max tx seq number error\n", rx_seq);
1430                 tx_seq_max = bus->tx_seq + 2;
1431         }
1432         bus->tx_max = tx_seq_max;
1433
1434         return 0;
1435 }
1436
1437 static inline void brcmf_sdio_update_hwhdr(u8 *header, u16 frm_length)
1438 {
1439         *(__le16 *)header = cpu_to_le16(frm_length);
1440         *(((__le16 *)header) + 1) = cpu_to_le16(~frm_length);
1441 }
1442
1443 static void brcmf_sdio_hdpack(struct brcmf_sdio *bus, u8 *header,
1444                               struct brcmf_sdio_hdrinfo *hd_info)
1445 {
1446         u32 hdrval;
1447         u8 hdr_offset;
1448
1449         brcmf_sdio_update_hwhdr(header, hd_info->len);
1450         hdr_offset = SDPCM_HWHDR_LEN;
1451
1452         if (bus->txglom) {
1453                 hdrval = (hd_info->len - hdr_offset) | (hd_info->lastfrm << 24);
1454                 *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval);
1455                 hdrval = (u16)hd_info->tail_pad << 16;
1456                 *(((__le32 *)(header + hdr_offset)) + 1) = cpu_to_le32(hdrval);
1457                 hdr_offset += SDPCM_HWEXT_LEN;
1458         }
1459
1460         hdrval = hd_info->seq_num;
1461         hdrval |= (hd_info->channel << SDPCM_CHANNEL_SHIFT) &
1462                   SDPCM_CHANNEL_MASK;
1463         hdrval |= (hd_info->dat_offset << SDPCM_DOFFSET_SHIFT) &
1464                   SDPCM_DOFFSET_MASK;
1465         *((__le32 *)(header + hdr_offset)) = cpu_to_le32(hdrval);
1466         *(((__le32 *)(header + hdr_offset)) + 1) = 0;
1467         trace_brcmf_sdpcm_hdr(SDPCM_TX + !!(bus->txglom), header);
1468 }
1469
1470 static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
1471 {
1472         u16 dlen, totlen;
1473         u8 *dptr, num = 0;
1474         u16 sublen;
1475         struct sk_buff *pfirst, *pnext;
1476
1477         int errcode;
1478         u8 doff, sfdoff;
1479
1480         struct brcmf_sdio_hdrinfo rd_new;
1481
1482         /* If packets, issue read(s) and send up packet chain */
1483         /* Return sequence numbers consumed? */
1484
1485         brcmf_dbg(SDIO, "start: glomd %p glom %p\n",
1486                   bus->glomd, skb_peek(&bus->glom));
1487
1488         /* If there's a descriptor, generate the packet chain */
1489         if (bus->glomd) {
1490                 pfirst = pnext = NULL;
1491                 dlen = (u16) (bus->glomd->len);
1492                 dptr = bus->glomd->data;
1493                 if (!dlen || (dlen & 1)) {
1494                         brcmf_err("bad glomd len(%d), ignore descriptor\n",
1495                                   dlen);
1496                         dlen = 0;
1497                 }
1498
1499                 for (totlen = num = 0; dlen; num++) {
1500                         /* Get (and move past) next length */
1501                         sublen = get_unaligned_le16(dptr);
1502                         dlen -= sizeof(u16);
1503                         dptr += sizeof(u16);
1504                         if ((sublen < SDPCM_HDRLEN) ||
1505                             ((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
1506                                 brcmf_err("descriptor len %d bad: %d\n",
1507                                           num, sublen);
1508                                 pnext = NULL;
1509                                 break;
1510                         }
1511                         if (sublen % bus->sgentry_align) {
1512                                 brcmf_err("sublen %d not multiple of %d\n",
1513                                           sublen, bus->sgentry_align);
1514                         }
1515                         totlen += sublen;
1516
1517                         /* For last frame, adjust read len so total
1518                                  is a block multiple */
1519                         if (!dlen) {
1520                                 sublen +=
1521                                     (roundup(totlen, bus->blocksize) - totlen);
1522                                 totlen = roundup(totlen, bus->blocksize);
1523                         }
1524
1525                         /* Allocate/chain packet for next subframe */
1526                         pnext = brcmu_pkt_buf_get_skb(sublen + bus->sgentry_align);
1527                         if (pnext == NULL) {
1528                                 brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n",
1529                                           num, sublen);
1530                                 break;
1531                         }
1532                         skb_queue_tail(&bus->glom, pnext);
1533
1534                         /* Adhere to start alignment requirements */
1535                         pkt_align(pnext, sublen, bus->sgentry_align);
1536                 }
1537
1538                 /* If all allocations succeeded, save packet chain
1539                          in bus structure */
1540                 if (pnext) {
1541                         brcmf_dbg(GLOM, "allocated %d-byte packet chain for %d subframes\n",
1542                                   totlen, num);
1543                         if (BRCMF_GLOM_ON() && bus->cur_read.len &&
1544                             totlen != bus->cur_read.len) {
1545                                 brcmf_dbg(GLOM, "glomdesc mismatch: nextlen %d glomdesc %d rxseq %d\n",
1546                                           bus->cur_read.len, totlen, rxseq);
1547                         }
1548                         pfirst = pnext = NULL;
1549                 } else {
1550                         brcmf_sdio_free_glom(bus);
1551                         num = 0;
1552                 }
1553
1554                 /* Done with descriptor packet */
1555                 brcmu_pkt_buf_free_skb(bus->glomd);
1556                 bus->glomd = NULL;
1557                 bus->cur_read.len = 0;
1558         }
1559
1560         /* Ok -- either we just generated a packet chain,
1561                  or had one from before */
1562         if (!skb_queue_empty(&bus->glom)) {
1563                 if (BRCMF_GLOM_ON()) {
1564                         brcmf_dbg(GLOM, "try superframe read, packet chain:\n");
1565                         skb_queue_walk(&bus->glom, pnext) {
1566                                 brcmf_dbg(GLOM, "    %p: %p len 0x%04x (%d)\n",
1567                                           pnext, (u8 *) (pnext->data),
1568                                           pnext->len, pnext->len);
1569                         }
1570                 }
1571
1572                 pfirst = skb_peek(&bus->glom);
1573                 dlen = (u16) brcmf_sdio_glom_len(bus);
1574
1575                 /* Do an SDIO read for the superframe.  Configurable iovar to
1576                  * read directly into the chained packet, or allocate a large
1577                  * packet and and copy into the chain.
1578                  */
1579                 sdio_claim_host(bus->sdiodev->func[1]);
1580                 errcode = brcmf_sdiod_recv_chain(bus->sdiodev,
1581                                                  &bus->glom, dlen);
1582                 sdio_release_host(bus->sdiodev->func[1]);
1583                 bus->sdcnt.f2rxdata++;
1584
1585                 /* On failure, kill the superframe */
1586                 if (errcode < 0) {
1587                         brcmf_err("glom read of %d bytes failed: %d\n",
1588                                   dlen, errcode);
1589
1590                         sdio_claim_host(bus->sdiodev->func[1]);
1591                         brcmf_sdio_rxfail(bus, true, false);
1592                         bus->sdcnt.rxglomfail++;
1593                         brcmf_sdio_free_glom(bus);
1594                         sdio_release_host(bus->sdiodev->func[1]);
1595                         return 0;
1596                 }
1597
1598                 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1599                                    pfirst->data, min_t(int, pfirst->len, 48),
1600                                    "SUPERFRAME:\n");
1601
1602                 rd_new.seq_num = rxseq;
1603                 rd_new.len = dlen;
1604                 sdio_claim_host(bus->sdiodev->func[1]);
1605                 errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new,
1606                                              BRCMF_SDIO_FT_SUPER);
1607                 sdio_release_host(bus->sdiodev->func[1]);
1608                 bus->cur_read.len = rd_new.len_nxtfrm << 4;
1609
1610                 /* Remove superframe header, remember offset */
1611                 skb_pull(pfirst, rd_new.dat_offset);
1612                 sfdoff = rd_new.dat_offset;
1613                 num = 0;
1614
1615                 /* Validate all the subframe headers */
1616                 skb_queue_walk(&bus->glom, pnext) {
1617                         /* leave when invalid subframe is found */
1618                         if (errcode)
1619                                 break;
1620
1621                         rd_new.len = pnext->len;
1622                         rd_new.seq_num = rxseq++;
1623                         sdio_claim_host(bus->sdiodev->func[1]);
1624                         errcode = brcmf_sdio_hdparse(bus, pnext->data, &rd_new,
1625                                                      BRCMF_SDIO_FT_SUB);
1626                         sdio_release_host(bus->sdiodev->func[1]);
1627                         brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1628                                            pnext->data, 32, "subframe:\n");
1629
1630                         num++;
1631                 }
1632
1633                 if (errcode) {
1634                         /* Terminate frame on error */
1635                         sdio_claim_host(bus->sdiodev->func[1]);
1636                         brcmf_sdio_rxfail(bus, true, false);
1637                         bus->sdcnt.rxglomfail++;
1638                         brcmf_sdio_free_glom(bus);
1639                         sdio_release_host(bus->sdiodev->func[1]);
1640                         bus->cur_read.len = 0;
1641                         return 0;
1642                 }
1643
1644                 /* Basic SD framing looks ok - process each packet (header) */
1645
1646                 skb_queue_walk_safe(&bus->glom, pfirst, pnext) {
1647                         dptr = (u8 *) (pfirst->data);
1648                         sublen = get_unaligned_le16(dptr);
1649                         doff = brcmf_sdio_getdatoffset(&dptr[SDPCM_HWHDR_LEN]);
1650
1651                         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
1652                                            dptr, pfirst->len,
1653                                            "Rx Subframe Data:\n");
1654
1655                         __skb_trim(pfirst, sublen);
1656                         skb_pull(pfirst, doff);
1657
1658                         if (pfirst->len == 0) {
1659                                 skb_unlink(pfirst, &bus->glom);
1660                                 brcmu_pkt_buf_free_skb(pfirst);
1661                                 continue;
1662                         }
1663
1664                         brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1665                                            pfirst->data,
1666                                            min_t(int, pfirst->len, 32),
1667                                            "subframe %d to stack, %p (%p/%d) nxt/lnk %p/%p\n",
1668                                            bus->glom.qlen, pfirst, pfirst->data,
1669                                            pfirst->len, pfirst->next,
1670                                            pfirst->prev);
1671                         skb_unlink(pfirst, &bus->glom);
1672                         if (brcmf_sdio_fromevntchan(&dptr[SDPCM_HWHDR_LEN]))
1673                                 brcmf_rx_event(bus->sdiodev->dev, pfirst);
1674                         else
1675                                 brcmf_rx_frame(bus->sdiodev->dev, pfirst,
1676                                                false);
1677                         bus->sdcnt.rxglompkts++;
1678                 }
1679
1680                 bus->sdcnt.rxglomframes++;
1681         }
1682         return num;
1683 }
1684
1685 static int brcmf_sdio_dcmd_resp_wait(struct brcmf_sdio *bus, uint *condition,
1686                                      bool *pending)
1687 {
1688         DECLARE_WAITQUEUE(wait, current);
1689         int timeout = DCMD_RESP_TIMEOUT;
1690
1691         /* Wait until control frame is available */
1692         add_wait_queue(&bus->dcmd_resp_wait, &wait);
1693         set_current_state(TASK_INTERRUPTIBLE);
1694
1695         while (!(*condition) && (!signal_pending(current) && timeout))
1696                 timeout = schedule_timeout(timeout);
1697
1698         if (signal_pending(current))
1699                 *pending = true;
1700
1701         set_current_state(TASK_RUNNING);
1702         remove_wait_queue(&bus->dcmd_resp_wait, &wait);
1703
1704         return timeout;
1705 }
1706
1707 static int brcmf_sdio_dcmd_resp_wake(struct brcmf_sdio *bus)
1708 {
1709         wake_up_interruptible(&bus->dcmd_resp_wait);
1710
1711         return 0;
1712 }
1713 static void
1714 brcmf_sdio_read_control(struct brcmf_sdio *bus, u8 *hdr, uint len, uint doff)
1715 {
1716         uint rdlen, pad;
1717         u8 *buf = NULL, *rbuf;
1718         int sdret;
1719
1720         brcmf_dbg(TRACE, "Enter\n");
1721
1722         if (bus->rxblen)
1723                 buf = vzalloc(bus->rxblen);
1724         if (!buf)
1725                 goto done;
1726
1727         rbuf = bus->rxbuf;
1728         pad = ((unsigned long)rbuf % bus->head_align);
1729         if (pad)
1730                 rbuf += (bus->head_align - pad);
1731
1732         /* Copy the already-read portion over */
1733         memcpy(buf, hdr, BRCMF_FIRSTREAD);
1734         if (len <= BRCMF_FIRSTREAD)
1735                 goto gotpkt;
1736
1737         /* Raise rdlen to next SDIO block to avoid tail command */
1738         rdlen = len - BRCMF_FIRSTREAD;
1739         if (bus->roundup && bus->blocksize && (rdlen > bus->blocksize)) {
1740                 pad = bus->blocksize - (rdlen % bus->blocksize);
1741                 if ((pad <= bus->roundup) && (pad < bus->blocksize) &&
1742                     ((len + pad) < bus->sdiodev->bus_if->maxctl))
1743                         rdlen += pad;
1744         } else if (rdlen % bus->head_align) {
1745                 rdlen += bus->head_align - (rdlen % bus->head_align);
1746         }
1747
1748         /* Drop if the read is too big or it exceeds our maximum */
1749         if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
1750                 brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
1751                           rdlen, bus->sdiodev->bus_if->maxctl);
1752                 brcmf_sdio_rxfail(bus, false, false);
1753                 goto done;
1754         }
1755
1756         if ((len - doff) > bus->sdiodev->bus_if->maxctl) {
1757                 brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
1758                           len, len - doff, bus->sdiodev->bus_if->maxctl);
1759                 bus->sdcnt.rx_toolong++;
1760                 brcmf_sdio_rxfail(bus, false, false);
1761                 goto done;
1762         }
1763
1764         /* Read remain of frame body */
1765         sdret = brcmf_sdiod_recv_buf(bus->sdiodev, rbuf, rdlen);
1766         bus->sdcnt.f2rxdata++;
1767
1768         /* Control frame failures need retransmission */
1769         if (sdret < 0) {
1770                 brcmf_err("read %d control bytes failed: %d\n",
1771                           rdlen, sdret);
1772                 bus->sdcnt.rxc_errors++;
1773                 brcmf_sdio_rxfail(bus, true, true);
1774                 goto done;
1775         } else
1776                 memcpy(buf + BRCMF_FIRSTREAD, rbuf, rdlen);
1777
1778 gotpkt:
1779
1780         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
1781                            buf, len, "RxCtrl:\n");
1782
1783         /* Point to valid data and indicate its length */
1784         spin_lock_bh(&bus->rxctl_lock);
1785         if (bus->rxctl) {
1786                 brcmf_err("last control frame is being processed.\n");
1787                 spin_unlock_bh(&bus->rxctl_lock);
1788                 vfree(buf);
1789                 goto done;
1790         }
1791         bus->rxctl = buf + doff;
1792         bus->rxctl_orig = buf;
1793         bus->rxlen = len - doff;
1794         spin_unlock_bh(&bus->rxctl_lock);
1795
1796 done:
1797         /* Awake any waiters */
1798         brcmf_sdio_dcmd_resp_wake(bus);
1799 }
1800
1801 /* Pad read to blocksize for efficiency */
1802 static void brcmf_sdio_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen)
1803 {
1804         if (bus->roundup && bus->blocksize && *rdlen > bus->blocksize) {
1805                 *pad = bus->blocksize - (*rdlen % bus->blocksize);
1806                 if (*pad <= bus->roundup && *pad < bus->blocksize &&
1807                     *rdlen + *pad + BRCMF_FIRSTREAD < MAX_RX_DATASZ)
1808                         *rdlen += *pad;
1809         } else if (*rdlen % bus->head_align) {
1810                 *rdlen += bus->head_align - (*rdlen % bus->head_align);
1811         }
1812 }
1813
1814 static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
1815 {
1816         struct sk_buff *pkt;            /* Packet for event or data frames */
1817         u16 pad;                /* Number of pad bytes to read */
1818         uint rxleft = 0;        /* Remaining number of frames allowed */
1819         int ret;                /* Return code from calls */
1820         uint rxcount = 0;       /* Total frames read */
1821         struct brcmf_sdio_hdrinfo *rd = &bus->cur_read, rd_new;
1822         u8 head_read = 0;
1823
1824         brcmf_dbg(TRACE, "Enter\n");
1825
1826         /* Not finished unless we encounter no more frames indication */
1827         bus->rxpending = true;
1828
1829         for (rd->seq_num = bus->rx_seq, rxleft = maxframes;
1830              !bus->rxskip && rxleft && bus->sdiodev->state == BRCMF_SDIOD_DATA;
1831              rd->seq_num++, rxleft--) {
1832
1833                 /* Handle glomming separately */
1834                 if (bus->glomd || !skb_queue_empty(&bus->glom)) {
1835                         u8 cnt;
1836                         brcmf_dbg(GLOM, "calling rxglom: glomd %p, glom %p\n",
1837                                   bus->glomd, skb_peek(&bus->glom));
1838                         cnt = brcmf_sdio_rxglom(bus, rd->seq_num);
1839                         brcmf_dbg(GLOM, "rxglom returned %d\n", cnt);
1840                         rd->seq_num += cnt - 1;
1841                         rxleft = (rxleft > cnt) ? (rxleft - cnt) : 1;
1842                         continue;
1843                 }
1844
1845                 rd->len_left = rd->len;
1846                 /* read header first for unknow frame length */
1847                 sdio_claim_host(bus->sdiodev->func[1]);
1848                 if (!rd->len) {
1849                         ret = brcmf_sdiod_recv_buf(bus->sdiodev,
1850                                                    bus->rxhdr, BRCMF_FIRSTREAD);
1851                         bus->sdcnt.f2rxhdrs++;
1852                         if (ret < 0) {
1853                                 brcmf_err("RXHEADER FAILED: %d\n",
1854                                           ret);
1855                                 bus->sdcnt.rx_hdrfail++;
1856                                 brcmf_sdio_rxfail(bus, true, true);
1857                                 sdio_release_host(bus->sdiodev->func[1]);
1858                                 continue;
1859                         }
1860
1861                         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() || BRCMF_HDRS_ON(),
1862                                            bus->rxhdr, SDPCM_HDRLEN,
1863                                            "RxHdr:\n");
1864
1865                         if (brcmf_sdio_hdparse(bus, bus->rxhdr, rd,
1866                                                BRCMF_SDIO_FT_NORMAL)) {
1867                                 sdio_release_host(bus->sdiodev->func[1]);
1868                                 if (!bus->rxpending)
1869                                         break;
1870                                 else
1871                                         continue;
1872                         }
1873
1874                         if (rd->channel == SDPCM_CONTROL_CHANNEL) {
1875                                 brcmf_sdio_read_control(bus, bus->rxhdr,
1876                                                         rd->len,
1877                                                         rd->dat_offset);
1878                                 /* prepare the descriptor for the next read */
1879                                 rd->len = rd->len_nxtfrm << 4;
1880                                 rd->len_nxtfrm = 0;
1881                                 /* treat all packet as event if we don't know */
1882                                 rd->channel = SDPCM_EVENT_CHANNEL;
1883                                 sdio_release_host(bus->sdiodev->func[1]);
1884                                 continue;
1885                         }
1886                         rd->len_left = rd->len > BRCMF_FIRSTREAD ?
1887                                        rd->len - BRCMF_FIRSTREAD : 0;
1888                         head_read = BRCMF_FIRSTREAD;
1889                 }
1890
1891                 brcmf_sdio_pad(bus, &pad, &rd->len_left);
1892
1893                 pkt = brcmu_pkt_buf_get_skb(rd->len_left + head_read +
1894                                             bus->head_align);
1895                 if (!pkt) {
1896                         /* Give up on data, request rtx of events */
1897                         brcmf_err("brcmu_pkt_buf_get_skb failed\n");
1898                         brcmf_sdio_rxfail(bus, false,
1899                                             RETRYCHAN(rd->channel));
1900                         sdio_release_host(bus->sdiodev->func[1]);
1901                         continue;
1902                 }
1903                 skb_pull(pkt, head_read);
1904                 pkt_align(pkt, rd->len_left, bus->head_align);
1905
1906                 ret = brcmf_sdiod_recv_pkt(bus->sdiodev, pkt);
1907                 bus->sdcnt.f2rxdata++;
1908                 sdio_release_host(bus->sdiodev->func[1]);
1909
1910                 if (ret < 0) {
1911                         brcmf_err("read %d bytes from channel %d failed: %d\n",
1912                                   rd->len, rd->channel, ret);
1913                         brcmu_pkt_buf_free_skb(pkt);
1914                         sdio_claim_host(bus->sdiodev->func[1]);
1915                         brcmf_sdio_rxfail(bus, true,
1916                                             RETRYCHAN(rd->channel));
1917                         sdio_release_host(bus->sdiodev->func[1]);
1918                         continue;
1919                 }
1920
1921                 if (head_read) {
1922                         skb_push(pkt, head_read);
1923                         memcpy(pkt->data, bus->rxhdr, head_read);
1924                         head_read = 0;
1925                 } else {
1926                         memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
1927                         rd_new.seq_num = rd->seq_num;
1928                         sdio_claim_host(bus->sdiodev->func[1]);
1929                         if (brcmf_sdio_hdparse(bus, bus->rxhdr, &rd_new,
1930                                                BRCMF_SDIO_FT_NORMAL)) {
1931                                 rd->len = 0;
1932                                 brcmu_pkt_buf_free_skb(pkt);
1933                         }
1934                         bus->sdcnt.rx_readahead_cnt++;
1935                         if (rd->len != roundup(rd_new.len, 16)) {
1936                                 brcmf_err("frame length mismatch:read %d, should be %d\n",
1937                                           rd->len,
1938                                           roundup(rd_new.len, 16) >> 4);
1939                                 rd->len = 0;
1940                                 brcmf_sdio_rxfail(bus, true, true);
1941                                 sdio_release_host(bus->sdiodev->func[1]);
1942                                 brcmu_pkt_buf_free_skb(pkt);
1943                                 continue;
1944                         }
1945                         sdio_release_host(bus->sdiodev->func[1]);
1946                         rd->len_nxtfrm = rd_new.len_nxtfrm;
1947                         rd->channel = rd_new.channel;
1948                         rd->dat_offset = rd_new.dat_offset;
1949
1950                         brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() &&
1951                                              BRCMF_DATA_ON()) &&
1952                                            BRCMF_HDRS_ON(),
1953                                            bus->rxhdr, SDPCM_HDRLEN,
1954                                            "RxHdr:\n");
1955
1956                         if (rd_new.channel == SDPCM_CONTROL_CHANNEL) {
1957                                 brcmf_err("readahead on control packet %d?\n",
1958                                           rd_new.seq_num);
1959                                 /* Force retry w/normal header read */
1960                                 rd->len = 0;
1961                                 sdio_claim_host(bus->sdiodev->func[1]);
1962                                 brcmf_sdio_rxfail(bus, false, true);
1963                                 sdio_release_host(bus->sdiodev->func[1]);
1964                                 brcmu_pkt_buf_free_skb(pkt);
1965                                 continue;
1966                         }
1967                 }
1968
1969                 brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
1970                                    pkt->data, rd->len, "Rx Data:\n");
1971
1972                 /* Save superframe descriptor and allocate packet frame */
1973                 if (rd->channel == SDPCM_GLOM_CHANNEL) {
1974                         if (SDPCM_GLOMDESC(&bus->rxhdr[SDPCM_HWHDR_LEN])) {
1975                                 brcmf_dbg(GLOM, "glom descriptor, %d bytes:\n",
1976                                           rd->len);
1977                                 brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
1978                                                    pkt->data, rd->len,
1979                                                    "Glom Data:\n");
1980                                 __skb_trim(pkt, rd->len);
1981                                 skb_pull(pkt, SDPCM_HDRLEN);
1982                                 bus->glomd = pkt;
1983                         } else {
1984                                 brcmf_err("%s: glom superframe w/o "
1985                                           "descriptor!\n", __func__);
1986                                 sdio_claim_host(bus->sdiodev->func[1]);
1987                                 brcmf_sdio_rxfail(bus, false, false);
1988                                 sdio_release_host(bus->sdiodev->func[1]);
1989                         }
1990                         /* prepare the descriptor for the next read */
1991                         rd->len = rd->len_nxtfrm << 4;
1992                         rd->len_nxtfrm = 0;
1993                         /* treat all packet as event if we don't know */
1994                         rd->channel = SDPCM_EVENT_CHANNEL;
1995                         continue;
1996                 }
1997
1998                 /* Fill in packet len and prio, deliver upward */
1999                 __skb_trim(pkt, rd->len);
2000                 skb_pull(pkt, rd->dat_offset);
2001
2002                 if (pkt->len == 0)
2003                         brcmu_pkt_buf_free_skb(pkt);
2004                 else if (rd->channel == SDPCM_EVENT_CHANNEL)
2005                         brcmf_rx_event(bus->sdiodev->dev, pkt);
2006                 else
2007                         brcmf_rx_frame(bus->sdiodev->dev, pkt,
2008                                        false);
2009
2010                 /* prepare the descriptor for the next read */
2011                 rd->len = rd->len_nxtfrm << 4;
2012                 rd->len_nxtfrm = 0;
2013                 /* treat all packet as event if we don't know */
2014                 rd->channel = SDPCM_EVENT_CHANNEL;
2015         }
2016
2017         rxcount = maxframes - rxleft;
2018         /* Message if we hit the limit */
2019         if (!rxleft)
2020                 brcmf_dbg(DATA, "hit rx limit of %d frames\n", maxframes);
2021         else
2022                 brcmf_dbg(DATA, "processed %d frames\n", rxcount);
2023         /* Back off rxseq if awaiting rtx, update rx_seq */
2024         if (bus->rxskip)
2025                 rd->seq_num--;
2026         bus->rx_seq = rd->seq_num;
2027
2028         return rxcount;
2029 }
2030
2031 static void
2032 brcmf_sdio_wait_event_wakeup(struct brcmf_sdio *bus)
2033 {
2034         wake_up_interruptible(&bus->ctrl_wait);
2035         return;
2036 }
2037
2038 static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt)
2039 {
2040         struct brcmf_bus_stats *stats;
2041         u16 head_pad;
2042         u8 *dat_buf;
2043
2044         dat_buf = (u8 *)(pkt->data);
2045
2046         /* Check head padding */
2047         head_pad = ((unsigned long)dat_buf % bus->head_align);
2048         if (head_pad) {
2049                 if (skb_headroom(pkt) < head_pad) {
2050                         stats = &bus->sdiodev->bus_if->stats;
2051                         atomic_inc(&stats->pktcowed);
2052                         if (skb_cow_head(pkt, head_pad)) {
2053                                 atomic_inc(&stats->pktcow_failed);
2054                                 return -ENOMEM;
2055                         }
2056                 }
2057                 skb_push(pkt, head_pad);
2058                 dat_buf = (u8 *)(pkt->data);
2059         }
2060         memset(dat_buf, 0, head_pad + bus->tx_hdrlen);
2061         return 0;
2062 }
2063
2064 /**
2065  * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
2066  * bus layer usage.
2067  */
2068 /* flag marking a dummy skb added for DMA alignment requirement */
2069 #define ALIGN_SKB_FLAG          0x8000
2070 /* bit mask of data length chopped from the previous packet */
2071 #define ALIGN_SKB_CHOP_LEN_MASK 0x7fff
2072
2073 static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
2074                                     struct sk_buff_head *pktq,
2075                                     struct sk_buff *pkt, u16 total_len)
2076 {
2077         struct brcmf_sdio_dev *sdiodev;
2078         struct sk_buff *pkt_pad;
2079         u16 tail_pad, tail_chop, chain_pad;
2080         unsigned int blksize;
2081         bool lastfrm;
2082         int ntail, ret;
2083
2084         sdiodev = bus->sdiodev;
2085         blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize;
2086         /* sg entry alignment should be a divisor of block size */
2087         WARN_ON(blksize % bus->sgentry_align);
2088
2089         /* Check tail padding */
2090         lastfrm = skb_queue_is_last(pktq, pkt);
2091         tail_pad = 0;
2092         tail_chop = pkt->len % bus->sgentry_align;
2093         if (tail_chop)
2094                 tail_pad = bus->sgentry_align - tail_chop;
2095         chain_pad = (total_len + tail_pad) % blksize;
2096         if (lastfrm && chain_pad)
2097                 tail_pad += blksize - chain_pad;
2098         if (skb_tailroom(pkt) < tail_pad && pkt->len > blksize) {
2099                 pkt_pad = brcmu_pkt_buf_get_skb(tail_pad + tail_chop +
2100                                                 bus->head_align);
2101                 if (pkt_pad == NULL)
2102                         return -ENOMEM;
2103                 ret = brcmf_sdio_txpkt_hdalign(bus, pkt_pad);
2104                 if (unlikely(ret < 0)) {
2105                         kfree_skb(pkt_pad);
2106                         return ret;
2107                 }
2108                 memcpy(pkt_pad->data,
2109                        pkt->data + pkt->len - tail_chop,
2110                        tail_chop);
2111                 *(u16 *)(pkt_pad->cb) = ALIGN_SKB_FLAG + tail_chop;
2112                 skb_trim(pkt, pkt->len - tail_chop);
2113                 skb_trim(pkt_pad, tail_pad + tail_chop);
2114                 __skb_queue_after(pktq, pkt, pkt_pad);
2115         } else {
2116                 ntail = pkt->data_len + tail_pad -
2117                         (pkt->end - pkt->tail);
2118                 if (skb_cloned(pkt) || ntail > 0)
2119                         if (pskb_expand_head(pkt, 0, ntail, GFP_ATOMIC))
2120                                 return -ENOMEM;
2121                 if (skb_linearize(pkt))
2122                         return -ENOMEM;
2123                 __skb_put(pkt, tail_pad);
2124         }
2125
2126         return tail_pad;
2127 }
2128
2129 /**
2130  * brcmf_sdio_txpkt_prep - packet preparation for transmit
2131  * @bus: brcmf_sdio structure pointer
2132  * @pktq: packet list pointer
2133  * @chan: virtual channel to transmit the packet
2134  *
2135  * Processes to be applied to the packet
2136  *      - Align data buffer pointer
2137  *      - Align data buffer length
2138  *      - Prepare header
2139  * Return: negative value if there is error
2140  */
2141 static int
2142 brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
2143                       uint chan)
2144 {
2145         u16 head_pad, total_len;
2146         struct sk_buff *pkt_next;
2147         u8 txseq;
2148         int ret;
2149         struct brcmf_sdio_hdrinfo hd_info = {0};
2150
2151         txseq = bus->tx_seq;
2152         total_len = 0;
2153         skb_queue_walk(pktq, pkt_next) {
2154                 /* alignment packet inserted in previous
2155                  * loop cycle can be skipped as it is
2156                  * already properly aligned and does not
2157                  * need an sdpcm header.
2158                  */
2159                 if (*(u16 *)(pkt_next->cb) & ALIGN_SKB_FLAG)
2160                         continue;
2161
2162                 /* align packet data pointer */
2163                 ret = brcmf_sdio_txpkt_hdalign(bus, pkt_next);
2164                 if (ret < 0)
2165                         return ret;
2166                 head_pad = (u16)ret;
2167                 if (head_pad)
2168                         memset(pkt_next->data + bus->tx_hdrlen, 0, head_pad);
2169
2170                 total_len += pkt_next->len;
2171
2172                 hd_info.len = pkt_next->len;
2173                 hd_info.lastfrm = skb_queue_is_last(pktq, pkt_next);
2174                 if (bus->txglom && pktq->qlen > 1) {
2175                         ret = brcmf_sdio_txpkt_prep_sg(bus, pktq,
2176                                                        pkt_next, total_len);
2177                         if (ret < 0)
2178                                 return ret;
2179                         hd_info.tail_pad = (u16)ret;
2180                         total_len += (u16)ret;
2181                 }
2182
2183                 hd_info.channel = chan;
2184                 hd_info.dat_offset = head_pad + bus->tx_hdrlen;
2185                 hd_info.seq_num = txseq++;
2186
2187                 /* Now fill the header */
2188                 brcmf_sdio_hdpack(bus, pkt_next->data, &hd_info);
2189
2190                 if (BRCMF_BYTES_ON() &&
2191                     ((BRCMF_CTL_ON() && chan == SDPCM_CONTROL_CHANNEL) ||
2192                      (BRCMF_DATA_ON() && chan != SDPCM_CONTROL_CHANNEL)))
2193                         brcmf_dbg_hex_dump(true, pkt_next->data, hd_info.len,
2194                                            "Tx Frame:\n");
2195                 else if (BRCMF_HDRS_ON())
2196                         brcmf_dbg_hex_dump(true, pkt_next->data,
2197                                            head_pad + bus->tx_hdrlen,
2198                                            "Tx Header:\n");
2199         }
2200         /* Hardware length tag of the first packet should be total
2201          * length of the chain (including padding)
2202          */
2203         if (bus->txglom)
2204                 brcmf_sdio_update_hwhdr(pktq->next->data, total_len);
2205         return 0;
2206 }
2207
2208 /**
2209  * brcmf_sdio_txpkt_postp - packet post processing for transmit
2210  * @bus: brcmf_sdio structure pointer
2211  * @pktq: packet list pointer
2212  *
2213  * Processes to be applied to the packet
2214  *      - Remove head padding
2215  *      - Remove tail padding
2216  */
2217 static void
2218 brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
2219 {
2220         u8 *hdr;
2221         u32 dat_offset;
2222         u16 tail_pad;
2223         u16 dummy_flags, chop_len;
2224         struct sk_buff *pkt_next, *tmp, *pkt_prev;
2225
2226         skb_queue_walk_safe(pktq, pkt_next, tmp) {
2227                 dummy_flags = *(u16 *)(pkt_next->cb);
2228                 if (dummy_flags & ALIGN_SKB_FLAG) {
2229                         chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK;
2230                         if (chop_len) {
2231                                 pkt_prev = pkt_next->prev;
2232                                 skb_put(pkt_prev, chop_len);
2233                         }
2234                         __skb_unlink(pkt_next, pktq);
2235                         brcmu_pkt_buf_free_skb(pkt_next);
2236                 } else {
2237                         hdr = pkt_next->data + bus->tx_hdrlen - SDPCM_SWHDR_LEN;
2238                         dat_offset = le32_to_cpu(*(__le32 *)hdr);
2239                         dat_offset = (dat_offset & SDPCM_DOFFSET_MASK) >>
2240                                      SDPCM_DOFFSET_SHIFT;
2241                         skb_pull(pkt_next, dat_offset);
2242                         if (bus->txglom) {
2243                                 tail_pad = le16_to_cpu(*(__le16 *)(hdr - 2));
2244                                 skb_trim(pkt_next, pkt_next->len - tail_pad);
2245                         }
2246                 }
2247         }
2248 }
2249
2250 /* Writes a HW/SW header into the packet and sends it. */
2251 /* Assumes: (a) header space already there, (b) caller holds lock */
2252 static int brcmf_sdio_txpkt(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
2253                             uint chan)
2254 {
2255         int ret;
2256         struct sk_buff *pkt_next, *tmp;
2257
2258         brcmf_dbg(TRACE, "Enter\n");
2259
2260         ret = brcmf_sdio_txpkt_prep(bus, pktq, chan);
2261         if (ret)
2262                 goto done;
2263
2264         sdio_claim_host(bus->sdiodev->func[1]);
2265         ret = brcmf_sdiod_send_pkt(bus->sdiodev, pktq);
2266         bus->sdcnt.f2txdata++;
2267
2268         if (ret < 0)
2269                 brcmf_sdio_txfail(bus);
2270
2271         sdio_release_host(bus->sdiodev->func[1]);
2272
2273 done:
2274         brcmf_sdio_txpkt_postp(bus, pktq);
2275         if (ret == 0)
2276                 bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP;
2277         skb_queue_walk_safe(pktq, pkt_next, tmp) {
2278                 __skb_unlink(pkt_next, pktq);
2279                 brcmf_proto_bcdc_txcomplete(bus->sdiodev->dev, pkt_next,
2280                                             ret == 0);
2281         }
2282         return ret;
2283 }
2284
2285 static uint brcmf_sdio_sendfromq(struct brcmf_sdio *bus, uint maxframes)
2286 {
2287         struct sk_buff *pkt;
2288         struct sk_buff_head pktq;
2289         u32 intstatus = 0;
2290         int ret = 0, prec_out, i;
2291         uint cnt = 0;
2292         u8 tx_prec_map, pkt_num;
2293
2294         brcmf_dbg(TRACE, "Enter\n");
2295
2296         tx_prec_map = ~bus->flowcontrol;
2297
2298         /* Send frames until the limit or some other event */
2299         for (cnt = 0; (cnt < maxframes) && data_ok(bus);) {
2300                 pkt_num = 1;
2301                 if (bus->txglom)
2302                         pkt_num = min_t(u8, bus->tx_max - bus->tx_seq,
2303                                         bus->sdiodev->txglomsz);
2304                 pkt_num = min_t(u32, pkt_num,
2305                                 brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol));
2306                 __skb_queue_head_init(&pktq);
2307                 spin_lock_bh(&bus->txq_lock);
2308                 for (i = 0; i < pkt_num; i++) {
2309                         pkt = brcmu_pktq_mdeq(&bus->txq, tx_prec_map,
2310                                               &prec_out);
2311                         if (pkt == NULL)
2312                                 break;
2313                         __skb_queue_tail(&pktq, pkt);
2314                 }
2315                 spin_unlock_bh(&bus->txq_lock);
2316                 if (i == 0)
2317                         break;
2318
2319                 ret = brcmf_sdio_txpkt(bus, &pktq, SDPCM_DATA_CHANNEL);
2320
2321                 cnt += i;
2322
2323                 /* In poll mode, need to check for other events */
2324                 if (!bus->intr) {
2325                         /* Check device status, signal pending interrupt */
2326                         sdio_claim_host(bus->sdiodev->func[1]);
2327                         ret = r_sdreg32(bus, &intstatus,
2328                                         offsetof(struct sdpcmd_regs,
2329                                                  intstatus));
2330                         sdio_release_host(bus->sdiodev->func[1]);
2331                         bus->sdcnt.f2txdata++;
2332                         if (ret != 0)
2333                                 break;
2334                         if (intstatus & bus->hostintmask)
2335                                 atomic_set(&bus->ipend, 1);
2336                 }
2337         }
2338
2339         /* Deflow-control stack if needed */
2340         if ((bus->sdiodev->state == BRCMF_SDIOD_DATA) &&
2341             bus->txoff && (pktq_len(&bus->txq) < TXLOW)) {
2342                 bus->txoff = false;
2343                 brcmf_proto_bcdc_txflowblock(bus->sdiodev->dev, false);
2344         }
2345
2346         return cnt;
2347 }
2348
2349 static int brcmf_sdio_tx_ctrlframe(struct brcmf_sdio *bus, u8 *frame, u16 len)
2350 {
2351         u8 doff;
2352         u16 pad;
2353         uint retries = 0;
2354         struct brcmf_sdio_hdrinfo hd_info = {0};
2355         int ret;
2356
2357         brcmf_dbg(TRACE, "Enter\n");
2358
2359         /* Back the pointer to make room for bus header */
2360         frame -= bus->tx_hdrlen;
2361         len += bus->tx_hdrlen;
2362
2363         /* Add alignment padding (optional for ctl frames) */
2364         doff = ((unsigned long)frame % bus->head_align);
2365         if (doff) {
2366                 frame -= doff;
2367                 len += doff;
2368                 memset(frame + bus->tx_hdrlen, 0, doff);
2369         }
2370
2371         /* Round send length to next SDIO block */
2372         pad = 0;
2373         if (bus->roundup && bus->blocksize && (len > bus->blocksize)) {
2374                 pad = bus->blocksize - (len % bus->blocksize);
2375                 if ((pad > bus->roundup) || (pad >= bus->blocksize))
2376                         pad = 0;
2377         } else if (len % bus->head_align) {
2378                 pad = bus->head_align - (len % bus->head_align);
2379         }
2380         len += pad;
2381
2382         hd_info.len = len - pad;
2383         hd_info.channel = SDPCM_CONTROL_CHANNEL;
2384         hd_info.dat_offset = doff + bus->tx_hdrlen;
2385         hd_info.seq_num = bus->tx_seq;
2386         hd_info.lastfrm = true;
2387         hd_info.tail_pad = pad;
2388         brcmf_sdio_hdpack(bus, frame, &hd_info);
2389
2390         if (bus->txglom)
2391                 brcmf_sdio_update_hwhdr(frame, len);
2392
2393         brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_CTL_ON(),
2394                            frame, len, "Tx Frame:\n");
2395         brcmf_dbg_hex_dump(!(BRCMF_BYTES_ON() && BRCMF_CTL_ON()) &&
2396                            BRCMF_HDRS_ON(),
2397                            frame, min_t(u16, len, 16), "TxHdr:\n");
2398
2399         do {
2400                 ret = brcmf_sdiod_send_buf(bus->sdiodev, frame, len);
2401
2402                 if (ret < 0)
2403                         brcmf_sdio_txfail(bus);
2404                 else
2405                         bus->tx_seq = (bus->tx_seq + 1) % SDPCM_SEQ_WRAP;
2406         } while (ret < 0 && retries++ < TXRETRIES);
2407
2408         return ret;
2409 }
2410
2411 static void brcmf_sdio_bus_stop(struct device *dev)
2412 {
2413         u32 local_hostintmask;
2414         u8 saveclk;
2415         int err;
2416         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2417         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2418         struct brcmf_sdio *bus = sdiodev->bus;
2419
2420         brcmf_dbg(TRACE, "Enter\n");
2421
2422         if (bus->watchdog_tsk) {
2423                 send_sig(SIGTERM, bus->watchdog_tsk, 1);
2424                 kthread_stop(bus->watchdog_tsk);
2425                 bus->watchdog_tsk = NULL;
2426         }
2427
2428         if (sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
2429                 sdio_claim_host(sdiodev->func[1]);
2430
2431                 /* Enable clock for device interrupts */
2432                 brcmf_sdio_bus_sleep(bus, false, false);
2433
2434                 /* Disable and clear interrupts at the chip level also */
2435                 w_sdreg32(bus, 0, offsetof(struct sdpcmd_regs, hostintmask));
2436                 local_hostintmask = bus->hostintmask;
2437                 bus->hostintmask = 0;
2438
2439                 /* Force backplane clocks to assure F2 interrupt propagates */
2440                 saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
2441                                             &err);
2442                 if (!err)
2443                         brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
2444                                           (saveclk | SBSDIO_FORCE_HT), &err);
2445                 if (err)
2446                         brcmf_err("Failed to force clock for F2: err %d\n",
2447                                   err);
2448
2449                 /* Turn off the bus (F2), free any pending packets */
2450                 brcmf_dbg(INTR, "disable SDIO interrupts\n");
2451                 sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
2452
2453                 /* Clear any pending interrupts now that F2 is disabled */
2454                 w_sdreg32(bus, local_hostintmask,
2455                           offsetof(struct sdpcmd_regs, intstatus));
2456
2457                 sdio_release_host(sdiodev->func[1]);
2458         }
2459         /* Clear the data packet queues */
2460         brcmu_pktq_flush(&bus->txq, true, NULL, NULL);
2461
2462         /* Clear any held glomming stuff */
2463         brcmu_pkt_buf_free_skb(bus->glomd);
2464         brcmf_sdio_free_glom(bus);
2465
2466         /* Clear rx control and wake any waiters */
2467         spin_lock_bh(&bus->rxctl_lock);
2468         bus->rxlen = 0;
2469         spin_unlock_bh(&bus->rxctl_lock);
2470         brcmf_sdio_dcmd_resp_wake(bus);
2471
2472         /* Reset some F2 state stuff */
2473         bus->rxskip = false;
2474         bus->tx_seq = bus->rx_seq = 0;
2475 }
2476
2477 static inline void brcmf_sdio_clrintr(struct brcmf_sdio *bus)
2478 {
2479         struct brcmf_sdio_dev *sdiodev;
2480         unsigned long flags;
2481
2482         sdiodev = bus->sdiodev;
2483         if (sdiodev->oob_irq_requested) {
2484                 spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
2485                 if (!sdiodev->irq_en && !atomic_read(&bus->ipend)) {
2486                         enable_irq(sdiodev->settings->bus.sdio.oob_irq_nr);
2487                         sdiodev->irq_en = true;
2488                 }
2489                 spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
2490         }
2491 }
2492
2493 static int brcmf_sdio_intr_rstatus(struct brcmf_sdio *bus)
2494 {
2495         struct brcmf_core *buscore;
2496         u32 addr;
2497         unsigned long val;
2498         int ret;
2499
2500         buscore = brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV);
2501         addr = buscore->base + offsetof(struct sdpcmd_regs, intstatus);
2502
2503         val = brcmf_sdiod_regrl(bus->sdiodev, addr, &ret);
2504         bus->sdcnt.f1regdata++;
2505         if (ret != 0)
2506                 return ret;
2507
2508         val &= bus->hostintmask;
2509         atomic_set(&bus->fcstate, !!(val & I_HMB_FC_STATE));
2510
2511         /* Clear interrupts */
2512         if (val) {
2513                 brcmf_sdiod_regwl(bus->sdiodev, addr, val, &ret);
2514                 bus->sdcnt.f1regdata++;
2515                 atomic_or(val, &bus->intstatus);
2516         }
2517
2518         return ret;
2519 }
2520
2521 static void brcmf_sdio_dpc(struct brcmf_sdio *bus)
2522 {
2523         u32 newstatus = 0;
2524         unsigned long intstatus;
2525         uint txlimit = bus->txbound;    /* Tx frames to send before resched */
2526         uint framecnt;                  /* Temporary counter of tx/rx frames */
2527         int err = 0;
2528
2529         brcmf_dbg(TRACE, "Enter\n");
2530
2531         sdio_claim_host(bus->sdiodev->func[1]);
2532
2533         /* If waiting for HTAVAIL, check status */
2534         if (!bus->sr_enabled && bus->clkstate == CLK_PENDING) {
2535                 u8 clkctl, devctl = 0;
2536
2537 #ifdef DEBUG
2538                 /* Check for inconsistent device control */
2539                 devctl = brcmf_sdiod_regrb(bus->sdiodev,
2540                                            SBSDIO_DEVICE_CTL, &err);
2541 #endif                          /* DEBUG */
2542
2543                 /* Read CSR, if clock on switch to AVAIL, else ignore */
2544                 clkctl = brcmf_sdiod_regrb(bus->sdiodev,
2545                                            SBSDIO_FUNC1_CHIPCLKCSR, &err);
2546
2547                 brcmf_dbg(SDIO, "DPC: PENDING, devctl 0x%02x clkctl 0x%02x\n",
2548                           devctl, clkctl);
2549
2550                 if (SBSDIO_HTAV(clkctl)) {
2551                         devctl = brcmf_sdiod_regrb(bus->sdiodev,
2552                                                    SBSDIO_DEVICE_CTL, &err);
2553                         devctl &= ~SBSDIO_DEVCTL_CA_INT_ONLY;
2554                         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
2555                                           devctl, &err);
2556                         bus->clkstate = CLK_AVAIL;
2557                 }
2558         }
2559
2560         /* Make sure backplane clock is on */
2561         brcmf_sdio_bus_sleep(bus, false, true);
2562
2563         /* Pending interrupt indicates new device status */
2564         if (atomic_read(&bus->ipend) > 0) {
2565                 atomic_set(&bus->ipend, 0);
2566                 err = brcmf_sdio_intr_rstatus(bus);
2567         }
2568
2569         /* Start with leftover status bits */
2570         intstatus = atomic_xchg(&bus->intstatus, 0);
2571
2572         /* Handle flow-control change: read new state in case our ack
2573          * crossed another change interrupt.  If change still set, assume
2574          * FC ON for safety, let next loop through do the debounce.
2575          */
2576         if (intstatus & I_HMB_FC_CHANGE) {
2577                 intstatus &= ~I_HMB_FC_CHANGE;
2578                 err = w_sdreg32(bus, I_HMB_FC_CHANGE,
2579                                 offsetof(struct sdpcmd_regs, intstatus));
2580
2581                 err = r_sdreg32(bus, &newstatus,
2582                                 offsetof(struct sdpcmd_regs, intstatus));
2583                 bus->sdcnt.f1regdata += 2;
2584                 atomic_set(&bus->fcstate,
2585                            !!(newstatus & (I_HMB_FC_STATE | I_HMB_FC_CHANGE)));
2586                 intstatus |= (newstatus & bus->hostintmask);
2587         }
2588
2589         /* Handle host mailbox indication */
2590         if (intstatus & I_HMB_HOST_INT) {
2591                 intstatus &= ~I_HMB_HOST_INT;
2592                 intstatus |= brcmf_sdio_hostmail(bus);
2593         }
2594
2595         sdio_release_host(bus->sdiodev->func[1]);
2596
2597         /* Generally don't ask for these, can get CRC errors... */
2598         if (intstatus & I_WR_OOSYNC) {
2599                 brcmf_err("Dongle reports WR_OOSYNC\n");
2600                 intstatus &= ~I_WR_OOSYNC;
2601         }
2602
2603         if (intstatus & I_RD_OOSYNC) {
2604                 brcmf_err("Dongle reports RD_OOSYNC\n");
2605                 intstatus &= ~I_RD_OOSYNC;
2606         }
2607
2608         if (intstatus & I_SBINT) {
2609                 brcmf_err("Dongle reports SBINT\n");
2610                 intstatus &= ~I_SBINT;
2611         }
2612
2613         /* Would be active due to wake-wlan in gSPI */
2614         if (intstatus & I_CHIPACTIVE) {
2615                 brcmf_dbg(INFO, "Dongle reports CHIPACTIVE\n");
2616                 intstatus &= ~I_CHIPACTIVE;
2617         }
2618
2619         /* Ignore frame indications if rxskip is set */
2620         if (bus->rxskip)
2621                 intstatus &= ~I_HMB_FRAME_IND;
2622
2623         /* On frame indication, read available frames */
2624         if ((intstatus & I_HMB_FRAME_IND) && (bus->clkstate == CLK_AVAIL)) {
2625                 brcmf_sdio_readframes(bus, bus->rxbound);
2626                 if (!bus->rxpending)
2627                         intstatus &= ~I_HMB_FRAME_IND;
2628         }
2629
2630         /* Keep still-pending events for next scheduling */
2631         if (intstatus)
2632                 atomic_or(intstatus, &bus->intstatus);
2633
2634         brcmf_sdio_clrintr(bus);
2635
2636         if (bus->ctrl_frame_stat && (bus->clkstate == CLK_AVAIL) &&
2637             data_ok(bus)) {
2638                 sdio_claim_host(bus->sdiodev->func[1]);
2639                 if (bus->ctrl_frame_stat) {
2640                         err = brcmf_sdio_tx_ctrlframe(bus,  bus->ctrl_frame_buf,
2641                                                       bus->ctrl_frame_len);
2642                         bus->ctrl_frame_err = err;
2643                         wmb();
2644                         bus->ctrl_frame_stat = false;
2645                 }
2646                 sdio_release_host(bus->sdiodev->func[1]);
2647                 brcmf_sdio_wait_event_wakeup(bus);
2648         }
2649         /* Send queued frames (limit 1 if rx may still be pending) */
2650         if ((bus->clkstate == CLK_AVAIL) && !atomic_read(&bus->fcstate) &&
2651             brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) && txlimit &&
2652             data_ok(bus)) {
2653                 framecnt = bus->rxpending ? min(txlimit, bus->txminmax) :
2654                                             txlimit;
2655                 brcmf_sdio_sendfromq(bus, framecnt);
2656         }
2657
2658         if ((bus->sdiodev->state != BRCMF_SDIOD_DATA) || (err != 0)) {
2659                 brcmf_err("failed backplane access over SDIO, halting operation\n");
2660                 atomic_set(&bus->intstatus, 0);
2661                 if (bus->ctrl_frame_stat) {
2662                         sdio_claim_host(bus->sdiodev->func[1]);
2663                         if (bus->ctrl_frame_stat) {
2664                                 bus->ctrl_frame_err = -ENODEV;
2665                                 wmb();
2666                                 bus->ctrl_frame_stat = false;
2667                                 brcmf_sdio_wait_event_wakeup(bus);
2668                         }
2669                         sdio_release_host(bus->sdiodev->func[1]);
2670                 }
2671         } else if (atomic_read(&bus->intstatus) ||
2672                    atomic_read(&bus->ipend) > 0 ||
2673                    (!atomic_read(&bus->fcstate) &&
2674                     brcmu_pktq_mlen(&bus->txq, ~bus->flowcontrol) &&
2675                     data_ok(bus))) {
2676                 bus->dpc_triggered = true;
2677         }
2678 }
2679
2680 static struct pktq *brcmf_sdio_bus_gettxq(struct device *dev)
2681 {
2682         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2683         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2684         struct brcmf_sdio *bus = sdiodev->bus;
2685
2686         return &bus->txq;
2687 }
2688
2689 static bool brcmf_sdio_prec_enq(struct pktq *q, struct sk_buff *pkt, int prec)
2690 {
2691         struct sk_buff *p;
2692         int eprec = -1;         /* precedence to evict from */
2693
2694         /* Fast case, precedence queue is not full and we are also not
2695          * exceeding total queue length
2696          */
2697         if (!pktq_pfull(q, prec) && !pktq_full(q)) {
2698                 brcmu_pktq_penq(q, prec, pkt);
2699                 return true;
2700         }
2701
2702         /* Determine precedence from which to evict packet, if any */
2703         if (pktq_pfull(q, prec)) {
2704                 eprec = prec;
2705         } else if (pktq_full(q)) {
2706                 p = brcmu_pktq_peek_tail(q, &eprec);
2707                 if (eprec > prec)
2708                         return false;
2709         }
2710
2711         /* Evict if needed */
2712         if (eprec >= 0) {
2713                 /* Detect queueing to unconfigured precedence */
2714                 if (eprec == prec)
2715                         return false;   /* refuse newer (incoming) packet */
2716                 /* Evict packet according to discard policy */
2717                 p = brcmu_pktq_pdeq_tail(q, eprec);
2718                 if (p == NULL)
2719                         brcmf_err("brcmu_pktq_pdeq_tail() failed\n");
2720                 brcmu_pkt_buf_free_skb(p);
2721         }
2722
2723         /* Enqueue */
2724         p = brcmu_pktq_penq(q, prec, pkt);
2725         if (p == NULL)
2726                 brcmf_err("brcmu_pktq_penq() failed\n");
2727
2728         return p != NULL;
2729 }
2730
2731 static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
2732 {
2733         int ret = -EBADE;
2734         uint prec;
2735         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2736         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2737         struct brcmf_sdio *bus = sdiodev->bus;
2738
2739         brcmf_dbg(TRACE, "Enter: pkt: data %p len %d\n", pkt->data, pkt->len);
2740         if (sdiodev->state != BRCMF_SDIOD_DATA)
2741                 return -EIO;
2742
2743         /* Add space for the header */
2744         skb_push(pkt, bus->tx_hdrlen);
2745         /* precondition: IS_ALIGNED((unsigned long)(pkt->data), 2) */
2746
2747         prec = prio2prec((pkt->priority & PRIOMASK));
2748
2749         /* Check for existing queue, current flow-control,
2750                          pending event, or pending clock */
2751         brcmf_dbg(TRACE, "deferring pktq len %d\n", pktq_len(&bus->txq));
2752         bus->sdcnt.fcqueued++;
2753
2754         /* Priority based enq */
2755         spin_lock_bh(&bus->txq_lock);
2756         /* reset bus_flags in packet cb */
2757         *(u16 *)(pkt->cb) = 0;
2758         if (!brcmf_sdio_prec_enq(&bus->txq, pkt, prec)) {
2759                 skb_pull(pkt, bus->tx_hdrlen);
2760                 brcmf_err("out of bus->txq !!!\n");
2761                 ret = -ENOSR;
2762         } else {
2763                 ret = 0;
2764         }
2765
2766         if (pktq_len(&bus->txq) >= TXHI) {
2767                 bus->txoff = true;
2768                 brcmf_proto_bcdc_txflowblock(dev, true);
2769         }
2770         spin_unlock_bh(&bus->txq_lock);
2771
2772 #ifdef DEBUG
2773         if (pktq_plen(&bus->txq, prec) > qcount[prec])
2774                 qcount[prec] = pktq_plen(&bus->txq, prec);
2775 #endif
2776
2777         brcmf_sdio_trigger_dpc(bus);
2778         return ret;
2779 }
2780
2781 #ifdef DEBUG
2782 #define CONSOLE_LINE_MAX        192
2783
2784 static int brcmf_sdio_readconsole(struct brcmf_sdio *bus)
2785 {
2786         struct brcmf_console *c = &bus->console;
2787         u8 line[CONSOLE_LINE_MAX], ch;
2788         u32 n, idx, addr;
2789         int rv;
2790
2791         /* Don't do anything until FWREADY updates console address */
2792         if (bus->console_addr == 0)
2793                 return 0;
2794
2795         /* Read console log struct */
2796         addr = bus->console_addr + offsetof(struct rte_console, log_le);
2797         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, (u8 *)&c->log_le,
2798                                sizeof(c->log_le));
2799         if (rv < 0)
2800                 return rv;
2801
2802         /* Allocate console buffer (one time only) */
2803         if (c->buf == NULL) {
2804                 c->bufsize = le32_to_cpu(c->log_le.buf_size);
2805                 c->buf = kmalloc(c->bufsize, GFP_ATOMIC);
2806                 if (c->buf == NULL)
2807                         return -ENOMEM;
2808         }
2809
2810         idx = le32_to_cpu(c->log_le.idx);
2811
2812         /* Protect against corrupt value */
2813         if (idx > c->bufsize)
2814                 return -EBADE;
2815
2816         /* Skip reading the console buffer if the index pointer
2817          has not moved */
2818         if (idx == c->last)
2819                 return 0;
2820
2821         /* Read the console buffer */
2822         addr = le32_to_cpu(c->log_le.buf);
2823         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr, c->buf, c->bufsize);
2824         if (rv < 0)
2825                 return rv;
2826
2827         while (c->last != idx) {
2828                 for (n = 0; n < CONSOLE_LINE_MAX - 2; n++) {
2829                         if (c->last == idx) {
2830                                 /* This would output a partial line.
2831                                  * Instead, back up
2832                                  * the buffer pointer and output this
2833                                  * line next time around.
2834                                  */
2835                                 if (c->last >= n)
2836                                         c->last -= n;
2837                                 else
2838                                         c->last = c->bufsize - n;
2839                                 goto break2;
2840                         }
2841                         ch = c->buf[c->last];
2842                         c->last = (c->last + 1) % c->bufsize;
2843                         if (ch == '\n')
2844                                 break;
2845                         line[n] = ch;
2846                 }
2847
2848                 if (n > 0) {
2849                         if (line[n - 1] == '\r')
2850                                 n--;
2851                         line[n] = 0;
2852                         pr_debug("CONSOLE: %s\n", line);
2853                 }
2854         }
2855 break2:
2856
2857         return 0;
2858 }
2859 #endif                          /* DEBUG */
2860
2861 static int
2862 brcmf_sdio_bus_txctl(struct device *dev, unsigned char *msg, uint msglen)
2863 {
2864         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
2865         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
2866         struct brcmf_sdio *bus = sdiodev->bus;
2867         int ret;
2868
2869         brcmf_dbg(TRACE, "Enter\n");
2870         if (sdiodev->state != BRCMF_SDIOD_DATA)
2871                 return -EIO;
2872
2873         /* Send from dpc */
2874         bus->ctrl_frame_buf = msg;
2875         bus->ctrl_frame_len = msglen;
2876         wmb();
2877         bus->ctrl_frame_stat = true;
2878
2879         brcmf_sdio_trigger_dpc(bus);
2880         wait_event_interruptible_timeout(bus->ctrl_wait, !bus->ctrl_frame_stat,
2881                                          CTL_DONE_TIMEOUT);
2882         ret = 0;
2883         if (bus->ctrl_frame_stat) {
2884                 sdio_claim_host(bus->sdiodev->func[1]);
2885                 if (bus->ctrl_frame_stat) {
2886                         brcmf_dbg(SDIO, "ctrl_frame timeout\n");
2887                         bus->ctrl_frame_stat = false;
2888                         ret = -ETIMEDOUT;
2889                 }
2890                 sdio_release_host(bus->sdiodev->func[1]);
2891         }
2892         if (!ret) {
2893                 brcmf_dbg(SDIO, "ctrl_frame complete, err=%d\n",
2894                           bus->ctrl_frame_err);
2895                 rmb();
2896                 ret = bus->ctrl_frame_err;
2897         }
2898
2899         if (ret)
2900                 bus->sdcnt.tx_ctlerrs++;
2901         else
2902                 bus->sdcnt.tx_ctlpkts++;
2903
2904         return ret;
2905 }
2906
2907 #ifdef DEBUG
2908 static int brcmf_sdio_dump_console(struct seq_file *seq, struct brcmf_sdio *bus,
2909                                    struct sdpcm_shared *sh)
2910 {
2911         u32 addr, console_ptr, console_size, console_index;
2912         char *conbuf = NULL;
2913         __le32 sh_val;
2914         int rv;
2915
2916         /* obtain console information from device memory */
2917         addr = sh->console_addr + offsetof(struct rte_console, log_le);
2918         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
2919                                (u8 *)&sh_val, sizeof(u32));
2920         if (rv < 0)
2921                 return rv;
2922         console_ptr = le32_to_cpu(sh_val);
2923
2924         addr = sh->console_addr + offsetof(struct rte_console, log_le.buf_size);
2925         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
2926                                (u8 *)&sh_val, sizeof(u32));
2927         if (rv < 0)
2928                 return rv;
2929         console_size = le32_to_cpu(sh_val);
2930
2931         addr = sh->console_addr + offsetof(struct rte_console, log_le.idx);
2932         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, addr,
2933                                (u8 *)&sh_val, sizeof(u32));
2934         if (rv < 0)
2935                 return rv;
2936         console_index = le32_to_cpu(sh_val);
2937
2938         /* allocate buffer for console data */
2939         if (console_size <= CONSOLE_BUFFER_MAX)
2940                 conbuf = vzalloc(console_size+1);
2941
2942         if (!conbuf)
2943                 return -ENOMEM;
2944
2945         /* obtain the console data from device */
2946         conbuf[console_size] = '\0';
2947         rv = brcmf_sdiod_ramrw(bus->sdiodev, false, console_ptr, (u8 *)conbuf,
2948                                console_size);
2949         if (rv < 0)
2950                 goto done;
2951
2952         rv = seq_write(seq, conbuf + console_index,
2953                        console_size - console_index);
2954         if (rv < 0)
2955                 goto done;
2956
2957         if (console_index > 0)
2958                 rv = seq_write(seq, conbuf, console_index - 1);
2959
2960 done:
2961         vfree(conbuf);
2962         return rv;
2963 }
2964
2965 static int brcmf_sdio_trap_info(struct seq_file *seq, struct brcmf_sdio *bus,
2966                                 struct sdpcm_shared *sh)
2967 {
2968         int error;
2969         struct brcmf_trap_info tr;
2970
2971         if ((sh->flags & SDPCM_SHARED_TRAP) == 0) {
2972                 brcmf_dbg(INFO, "no trap in firmware\n");
2973                 return 0;
2974         }
2975
2976         error = brcmf_sdiod_ramrw(bus->sdiodev, false, sh->trap_addr, (u8 *)&tr,
2977                                   sizeof(struct brcmf_trap_info));
2978         if (error < 0)
2979                 return error;
2980
2981         seq_printf(seq,
2982                    "dongle trap info: type 0x%x @ epc 0x%08x\n"
2983                    "  cpsr 0x%08x spsr 0x%08x sp 0x%08x\n"
2984                    "  lr   0x%08x pc   0x%08x offset 0x%x\n"
2985                    "  r0   0x%08x r1   0x%08x r2 0x%08x r3 0x%08x\n"
2986                    "  r4   0x%08x r5   0x%08x r6 0x%08x r7 0x%08x\n",
2987                    le32_to_cpu(tr.type), le32_to_cpu(tr.epc),
2988                    le32_to_cpu(tr.cpsr), le32_to_cpu(tr.spsr),
2989                    le32_to_cpu(tr.r13), le32_to_cpu(tr.r14),
2990                    le32_to_cpu(tr.pc), sh->trap_addr,
2991                    le32_to_cpu(tr.r0), le32_to_cpu(tr.r1),
2992                    le32_to_cpu(tr.r2), le32_to_cpu(tr.r3),
2993                    le32_to_cpu(tr.r4), le32_to_cpu(tr.r5),
2994                    le32_to_cpu(tr.r6), le32_to_cpu(tr.r7));
2995
2996         return 0;
2997 }
2998
2999 static int brcmf_sdio_assert_info(struct seq_file *seq, struct brcmf_sdio *bus,
3000                                   struct sdpcm_shared *sh)
3001 {
3002         int error = 0;
3003         char file[80] = "?";
3004         char expr[80] = "<???>";
3005
3006         if ((sh->flags & SDPCM_SHARED_ASSERT_BUILT) == 0) {
3007                 brcmf_dbg(INFO, "firmware not built with -assert\n");
3008                 return 0;
3009         } else if ((sh->flags & SDPCM_SHARED_ASSERT) == 0) {
3010                 brcmf_dbg(INFO, "no assert in dongle\n");
3011                 return 0;
3012         }
3013
3014         sdio_claim_host(bus->sdiodev->func[1]);
3015         if (sh->assert_file_addr != 0) {
3016                 error = brcmf_sdiod_ramrw(bus->sdiodev, false,
3017                                           sh->assert_file_addr, (u8 *)file, 80);
3018                 if (error < 0)
3019                         return error;
3020         }
3021         if (sh->assert_exp_addr != 0) {
3022                 error = brcmf_sdiod_ramrw(bus->sdiodev, false,
3023                                           sh->assert_exp_addr, (u8 *)expr, 80);
3024                 if (error < 0)
3025                         return error;
3026         }
3027         sdio_release_host(bus->sdiodev->func[1]);
3028
3029         seq_printf(seq, "dongle assert: %s:%d: assert(%s)\n",
3030                    file, sh->assert_line, expr);
3031         return 0;
3032 }
3033
3034 static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
3035 {
3036         int error;
3037         struct sdpcm_shared sh;
3038
3039         error = brcmf_sdio_readshared(bus, &sh);
3040
3041         if (error < 0)
3042                 return error;
3043
3044         if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0)
3045                 brcmf_dbg(INFO, "firmware not built with -assert\n");
3046         else if (sh.flags & SDPCM_SHARED_ASSERT)
3047                 brcmf_err("assertion in dongle\n");
3048
3049         if (sh.flags & SDPCM_SHARED_TRAP)
3050                 brcmf_err("firmware trap in dongle\n");
3051
3052         return 0;
3053 }
3054
3055 static int brcmf_sdio_died_dump(struct seq_file *seq, struct brcmf_sdio *bus)
3056 {
3057         int error = 0;
3058         struct sdpcm_shared sh;
3059
3060         error = brcmf_sdio_readshared(bus, &sh);
3061         if (error < 0)
3062                 goto done;
3063
3064         error = brcmf_sdio_assert_info(seq, bus, &sh);
3065         if (error < 0)
3066                 goto done;
3067
3068         error = brcmf_sdio_trap_info(seq, bus, &sh);
3069         if (error < 0)
3070                 goto done;
3071
3072         error = brcmf_sdio_dump_console(seq, bus, &sh);
3073
3074 done:
3075         return error;
3076 }
3077
3078 static int brcmf_sdio_forensic_read(struct seq_file *seq, void *data)
3079 {
3080         struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
3081         struct brcmf_sdio *bus = bus_if->bus_priv.sdio->bus;
3082
3083         return brcmf_sdio_died_dump(seq, bus);
3084 }
3085
3086 static int brcmf_debugfs_sdio_count_read(struct seq_file *seq, void *data)
3087 {
3088         struct brcmf_bus *bus_if = dev_get_drvdata(seq->private);
3089         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
3090         struct brcmf_sdio_count *sdcnt = &sdiodev->bus->sdcnt;
3091
3092         seq_printf(seq,
3093                    "intrcount:    %u\nlastintrs:    %u\n"
3094                    "pollcnt:      %u\nregfails:     %u\n"
3095                    "tx_sderrs:    %u\nfcqueued:     %u\n"
3096                    "rxrtx:        %u\nrx_toolong:   %u\n"
3097                    "rxc_errors:   %u\nrx_hdrfail:   %u\n"
3098                    "rx_badhdr:    %u\nrx_badseq:    %u\n"
3099                    "fc_rcvd:      %u\nfc_xoff:      %u\n"
3100                    "fc_xon:       %u\nrxglomfail:   %u\n"
3101                    "rxglomframes: %u\nrxglompkts:   %u\n"
3102                    "f2rxhdrs:     %u\nf2rxdata:     %u\n"
3103                    "f2txdata:     %u\nf1regdata:    %u\n"
3104                    "tickcnt:      %u\ntx_ctlerrs:   %lu\n"
3105                    "tx_ctlpkts:   %lu\nrx_ctlerrs:   %lu\n"
3106                    "rx_ctlpkts:   %lu\nrx_readahead: %lu\n",
3107                    sdcnt->intrcount, sdcnt->lastintrs,
3108                    sdcnt->pollcnt, sdcnt->regfails,
3109                    sdcnt->tx_sderrs, sdcnt->fcqueued,
3110                    sdcnt->rxrtx, sdcnt->rx_toolong,
3111                    sdcnt->rxc_errors, sdcnt->rx_hdrfail,
3112                    sdcnt->rx_badhdr, sdcnt->rx_badseq,
3113                    sdcnt->fc_rcvd, sdcnt->fc_xoff,
3114                    sdcnt->fc_xon, sdcnt->rxglomfail,
3115                    sdcnt->rxglomframes, sdcnt->rxglompkts,
3116                    sdcnt->f2rxhdrs, sdcnt->f2rxdata,
3117                    sdcnt->f2txdata, sdcnt->f1regdata,
3118                    sdcnt->tickcnt, sdcnt->tx_ctlerrs,
3119                    sdcnt->tx_ctlpkts, sdcnt->rx_ctlerrs,
3120                    sdcnt->rx_ctlpkts, sdcnt->rx_readahead_cnt);
3121
3122         return 0;
3123 }
3124
3125 static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
3126 {
3127         struct brcmf_pub *drvr = bus->sdiodev->bus_if->drvr;
3128         struct dentry *dentry = brcmf_debugfs_get_devdir(drvr);
3129
3130         if (IS_ERR_OR_NULL(dentry))
3131                 return;
3132
3133         bus->console_interval = BRCMF_CONSOLE;
3134
3135         brcmf_debugfs_add_entry(drvr, "forensics", brcmf_sdio_forensic_read);
3136         brcmf_debugfs_add_entry(drvr, "counters",
3137                                 brcmf_debugfs_sdio_count_read);
3138         debugfs_create_u32("console_interval", 0644, dentry,
3139                            &bus->console_interval);
3140 }
3141 #else
3142 static int brcmf_sdio_checkdied(struct brcmf_sdio *bus)
3143 {
3144         return 0;
3145 }
3146
3147 static void brcmf_sdio_debugfs_create(struct brcmf_sdio *bus)
3148 {
3149 }
3150 #endif /* DEBUG */
3151
3152 static int
3153 brcmf_sdio_bus_rxctl(struct device *dev, unsigned char *msg, uint msglen)
3154 {
3155         int timeleft;
3156         uint rxlen = 0;
3157         bool pending;
3158         u8 *buf;
3159         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
3160         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
3161         struct brcmf_sdio *bus = sdiodev->bus;
3162
3163         brcmf_dbg(TRACE, "Enter\n");
3164         if (sdiodev->state != BRCMF_SDIOD_DATA)
3165                 return -EIO;
3166
3167         /* Wait until control frame is available */
3168         timeleft = brcmf_sdio_dcmd_resp_wait(bus, &bus->rxlen, &pending);
3169
3170         spin_lock_bh(&bus->rxctl_lock);
3171         rxlen = bus->rxlen;
3172         memcpy(msg, bus->rxctl, min(msglen, rxlen));
3173         bus->rxctl = NULL;
3174         buf = bus->rxctl_orig;
3175         bus->rxctl_orig = NULL;
3176         bus->rxlen = 0;
3177         spin_unlock_bh(&bus->rxctl_lock);
3178         vfree(buf);
3179
3180         if (rxlen) {
3181                 brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
3182                           rxlen, msglen);
3183         } else if (timeleft == 0) {
3184                 brcmf_err("resumed on timeout\n");
3185                 brcmf_sdio_checkdied(bus);
3186         } else if (pending) {
3187                 brcmf_dbg(CTL, "cancelled\n");
3188                 return -ERESTARTSYS;
3189         } else {
3190                 brcmf_dbg(CTL, "resumed for unknown reason?\n");
3191                 brcmf_sdio_checkdied(bus);
3192         }
3193
3194         if (rxlen)
3195                 bus->sdcnt.rx_ctlpkts++;
3196         else
3197                 bus->sdcnt.rx_ctlerrs++;
3198
3199         return rxlen ? (int)rxlen : -ETIMEDOUT;
3200 }
3201
3202 #ifdef DEBUG
3203 static bool
3204 brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr,
3205                         u8 *ram_data, uint ram_sz)
3206 {
3207         char *ram_cmp;
3208         int err;
3209         bool ret = true;
3210         int address;
3211         int offset;
3212         int len;
3213
3214         /* read back and verify */
3215         brcmf_dbg(INFO, "Compare RAM dl & ul at 0x%08x; size=%d\n", ram_addr,
3216                   ram_sz);
3217         ram_cmp = kmalloc(MEMBLOCK, GFP_KERNEL);
3218         /* do not proceed while no memory but  */
3219         if (!ram_cmp)
3220                 return true;
3221
3222         address = ram_addr;
3223         offset = 0;
3224         while (offset < ram_sz) {
3225                 len = ((offset + MEMBLOCK) < ram_sz) ? MEMBLOCK :
3226                       ram_sz - offset;
3227                 err = brcmf_sdiod_ramrw(sdiodev, false, address, ram_cmp, len);
3228                 if (err) {
3229                         brcmf_err("error %d on reading %d membytes at 0x%08x\n",
3230                                   err, len, address);
3231                         ret = false;
3232                         break;
3233                 } else if (memcmp(ram_cmp, &ram_data[offset], len)) {
3234                         brcmf_err("Downloaded RAM image is corrupted, block offset is %d, len is %d\n",
3235                                   offset, len);
3236                         ret = false;
3237                         break;
3238                 }
3239                 offset += len;
3240                 address += len;
3241         }
3242
3243         kfree(ram_cmp);
3244
3245         return ret;
3246 }
3247 #else   /* DEBUG */
3248 static bool
3249 brcmf_sdio_verifymemory(struct brcmf_sdio_dev *sdiodev, u32 ram_addr,
3250                         u8 *ram_data, uint ram_sz)
3251 {
3252         return true;
3253 }
3254 #endif  /* DEBUG */
3255
3256 static int brcmf_sdio_download_code_file(struct brcmf_sdio *bus,
3257                                          const struct firmware *fw)
3258 {
3259         int err;
3260
3261         brcmf_dbg(TRACE, "Enter\n");
3262
3263         err = brcmf_sdiod_ramrw(bus->sdiodev, true, bus->ci->rambase,
3264                                 (u8 *)fw->data, fw->size);
3265         if (err)
3266                 brcmf_err("error %d on writing %d membytes at 0x%08x\n",
3267                           err, (int)fw->size, bus->ci->rambase);
3268         else if (!brcmf_sdio_verifymemory(bus->sdiodev, bus->ci->rambase,
3269                                           (u8 *)fw->data, fw->size))
3270                 err = -EIO;
3271
3272         return err;
3273 }
3274
3275 static int brcmf_sdio_download_nvram(struct brcmf_sdio *bus,
3276                                      void *vars, u32 varsz)
3277 {
3278         int address;
3279         int err;
3280
3281         brcmf_dbg(TRACE, "Enter\n");
3282
3283         address = bus->ci->ramsize - varsz + bus->ci->rambase;
3284         err = brcmf_sdiod_ramrw(bus->sdiodev, true, address, vars, varsz);
3285         if (err)
3286                 brcmf_err("error %d on writing %d nvram bytes at 0x%08x\n",
3287                           err, varsz, address);
3288         else if (!brcmf_sdio_verifymemory(bus->sdiodev, address, vars, varsz))
3289                 err = -EIO;
3290
3291         return err;
3292 }
3293
3294 static int brcmf_sdio_download_firmware(struct brcmf_sdio *bus,
3295                                         const struct firmware *fw,
3296                                         void *nvram, u32 nvlen)
3297 {
3298         int bcmerror;
3299         u32 rstvec;
3300
3301         sdio_claim_host(bus->sdiodev->func[1]);
3302         brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
3303
3304         rstvec = get_unaligned_le32(fw->data);
3305         brcmf_dbg(SDIO, "firmware rstvec: %x\n", rstvec);
3306
3307         bcmerror = brcmf_sdio_download_code_file(bus, fw);
3308         release_firmware(fw);
3309         if (bcmerror) {
3310                 brcmf_err("dongle image file download failed\n");
3311                 brcmf_fw_nvram_free(nvram);
3312                 goto err;
3313         }
3314
3315         bcmerror = brcmf_sdio_download_nvram(bus, nvram, nvlen);
3316         brcmf_fw_nvram_free(nvram);
3317         if (bcmerror) {
3318                 brcmf_err("dongle nvram file download failed\n");
3319                 goto err;
3320         }
3321
3322         /* Take arm out of reset */
3323         if (!brcmf_chip_set_active(bus->ci, rstvec)) {
3324                 brcmf_err("error getting out of ARM core reset\n");
3325                 goto err;
3326         }
3327
3328 err:
3329         brcmf_sdio_clkctl(bus, CLK_SDONLY, false);
3330         sdio_release_host(bus->sdiodev->func[1]);
3331         return bcmerror;
3332 }
3333
3334 static void brcmf_sdio_sr_init(struct brcmf_sdio *bus)
3335 {
3336         int err = 0;
3337         u8 val;
3338
3339         brcmf_dbg(TRACE, "Enter\n");
3340
3341         val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, &err);
3342         if (err) {
3343                 brcmf_err("error reading SBSDIO_FUNC1_WAKEUPCTRL\n");
3344                 return;
3345         }
3346
3347         val |= 1 << SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT;
3348         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_WAKEUPCTRL, val, &err);
3349         if (err) {
3350                 brcmf_err("error writing SBSDIO_FUNC1_WAKEUPCTRL\n");
3351                 return;
3352         }
3353
3354         /* Add CMD14 Support */
3355         brcmf_sdiod_regwb(bus->sdiodev, SDIO_CCCR_BRCM_CARDCAP,
3356                           (SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT |
3357                            SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT),
3358                           &err);
3359         if (err) {
3360                 brcmf_err("error writing SDIO_CCCR_BRCM_CARDCAP\n");
3361                 return;
3362         }
3363
3364         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3365                           SBSDIO_FORCE_HT, &err);
3366         if (err) {
3367                 brcmf_err("error writing SBSDIO_FUNC1_CHIPCLKCSR\n");
3368                 return;
3369         }
3370
3371         /* set flag */
3372         bus->sr_enabled = true;
3373         brcmf_dbg(INFO, "SR enabled\n");
3374 }
3375
3376 /* enable KSO bit */
3377 static int brcmf_sdio_kso_init(struct brcmf_sdio *bus)
3378 {
3379         u8 val;
3380         int err = 0;
3381
3382         brcmf_dbg(TRACE, "Enter\n");
3383
3384         /* KSO bit added in SDIO core rev 12 */
3385         if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12)
3386                 return 0;
3387
3388         val = brcmf_sdiod_regrb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR, &err);
3389         if (err) {
3390                 brcmf_err("error reading SBSDIO_FUNC1_SLEEPCSR\n");
3391                 return err;
3392         }
3393
3394         if (!(val & SBSDIO_FUNC1_SLEEPCSR_KSO_MASK)) {
3395                 val |= (SBSDIO_FUNC1_SLEEPCSR_KSO_EN <<
3396                         SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT);
3397                 brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_SLEEPCSR,
3398                                   val, &err);
3399                 if (err) {
3400                         brcmf_err("error writing SBSDIO_FUNC1_SLEEPCSR\n");
3401                         return err;
3402                 }
3403         }
3404
3405         return 0;
3406 }
3407
3408
3409 static int brcmf_sdio_bus_preinit(struct device *dev)
3410 {
3411         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
3412         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
3413         struct brcmf_sdio *bus = sdiodev->bus;
3414         uint pad_size;
3415         u32 value;
3416         int err;
3417
3418         /* the commands below use the terms tx and rx from
3419          * a device perspective, ie. bus:txglom affects the
3420          * bus transfers from device to host.
3421          */
3422         if (brcmf_chip_get_core(bus->ci, BCMA_CORE_SDIO_DEV)->rev < 12) {
3423                 /* for sdio core rev < 12, disable txgloming */
3424                 value = 0;
3425                 err = brcmf_iovar_data_set(dev, "bus:txglom", &value,
3426                                            sizeof(u32));
3427         } else {
3428                 /* otherwise, set txglomalign */
3429                 value = sdiodev->settings->bus.sdio.sd_sgentry_align;
3430                 /* SDIO ADMA requires at least 32 bit alignment */
3431                 value = max_t(u32, value, ALIGNMENT);
3432                 err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
3433                                            sizeof(u32));
3434         }
3435
3436         if (err < 0)
3437                 goto done;
3438
3439         bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
3440         if (sdiodev->sg_support) {
3441                 bus->txglom = false;
3442                 value = 1;
3443                 pad_size = bus->sdiodev->func[2]->cur_blksize << 1;
3444                 err = brcmf_iovar_data_set(bus->sdiodev->dev, "bus:rxglom",
3445                                            &value, sizeof(u32));
3446                 if (err < 0) {
3447                         /* bus:rxglom is allowed to fail */
3448                         err = 0;
3449                 } else {
3450                         bus->txglom = true;
3451                         bus->tx_hdrlen += SDPCM_HWEXT_LEN;
3452                 }
3453         }
3454         brcmf_bus_add_txhdrlen(bus->sdiodev->dev, bus->tx_hdrlen);
3455
3456 done:
3457         return err;
3458 }
3459
3460 static size_t brcmf_sdio_bus_get_ramsize(struct device *dev)
3461 {
3462         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
3463         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
3464         struct brcmf_sdio *bus = sdiodev->bus;
3465
3466         return bus->ci->ramsize - bus->ci->srsize;
3467 }
3468
3469 static int brcmf_sdio_bus_get_memdump(struct device *dev, void *data,
3470                                       size_t mem_size)
3471 {
3472         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
3473         struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
3474         struct brcmf_sdio *bus = sdiodev->bus;
3475         int err;
3476         int address;
3477         int offset;
3478         int len;
3479
3480         brcmf_dbg(INFO, "dump at 0x%08x: size=%zu\n", bus->ci->rambase,
3481                   mem_size);
3482
3483         address = bus->ci->rambase;
3484         offset = err = 0;
3485         sdio_claim_host(sdiodev->func[1]);
3486         while (offset < mem_size) {
3487                 len = ((offset + MEMBLOCK) < mem_size) ? MEMBLOCK :
3488                       mem_size - offset;
3489                 err = brcmf_sdiod_ramrw(sdiodev, false, address, data, len);
3490                 if (err) {
3491                         brcmf_err("error %d on reading %d membytes at 0x%08x\n",
3492                                   err, len, address);
3493                         goto done;
3494                 }
3495                 data += len;
3496                 offset += len;
3497                 address += len;
3498         }
3499
3500 done:
3501         sdio_release_host(sdiodev->func[1]);
3502         return err;
3503 }
3504
3505 void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus)
3506 {
3507         if (!bus->dpc_triggered) {
3508                 bus->dpc_triggered = true;
3509                 queue_work(bus->brcmf_wq, &bus->datawork);
3510         }
3511 }
3512
3513 void brcmf_sdio_isr(struct brcmf_sdio *bus)
3514 {
3515         brcmf_dbg(TRACE, "Enter\n");
3516
3517         if (!bus) {
3518                 brcmf_err("bus is null pointer, exiting\n");
3519                 return;
3520         }
3521
3522         /* Count the interrupt call */
3523         bus->sdcnt.intrcount++;
3524         if (in_interrupt())
3525                 atomic_set(&bus->ipend, 1);
3526         else
3527                 if (brcmf_sdio_intr_rstatus(bus)) {
3528                         brcmf_err("failed backplane access\n");
3529                 }
3530
3531         /* Disable additional interrupts (is this needed now)? */
3532         if (!bus->intr)
3533                 brcmf_err("isr w/o interrupt configured!\n");
3534
3535         bus->dpc_triggered = true;
3536         queue_work(bus->brcmf_wq, &bus->datawork);
3537 }
3538
3539 static void brcmf_sdio_bus_watchdog(struct brcmf_sdio *bus)
3540 {
3541         brcmf_dbg(TIMER, "Enter\n");
3542
3543         /* Poll period: check device if appropriate. */
3544         if (!bus->sr_enabled &&
3545             bus->poll && (++bus->polltick >= bus->pollrate)) {
3546                 u32 intstatus = 0;
3547
3548                 /* Reset poll tick */
3549                 bus->polltick = 0;
3550
3551                 /* Check device if no interrupts */
3552                 if (!bus->intr ||
3553                     (bus->sdcnt.intrcount == bus->sdcnt.lastintrs)) {
3554
3555                         if (!bus->dpc_triggered) {
3556                                 u8 devpend;
3557
3558                                 sdio_claim_host(bus->sdiodev->func[1]);
3559                                 devpend = brcmf_sdiod_regrb(bus->sdiodev,
3560                                                             SDIO_CCCR_INTx,
3561                                                             NULL);
3562                                 sdio_release_host(bus->sdiodev->func[1]);
3563                                 intstatus = devpend & (INTR_STATUS_FUNC1 |
3564                                                        INTR_STATUS_FUNC2);
3565                         }
3566
3567                         /* If there is something, make like the ISR and
3568                                  schedule the DPC */
3569                         if (intstatus) {
3570                                 bus->sdcnt.pollcnt++;
3571                                 atomic_set(&bus->ipend, 1);
3572
3573                                 bus->dpc_triggered = true;
3574                                 queue_work(bus->brcmf_wq, &bus->datawork);
3575                         }
3576                 }
3577
3578                 /* Update interrupt tracking */
3579                 bus->sdcnt.lastintrs = bus->sdcnt.intrcount;
3580         }
3581 #ifdef DEBUG
3582         /* Poll for console output periodically */
3583         if (bus->sdiodev->state == BRCMF_SDIOD_DATA && BRCMF_FWCON_ON() &&
3584             bus->console_interval != 0) {
3585                 bus->console.count += jiffies_to_msecs(BRCMF_WD_POLL);
3586                 if (bus->console.count >= bus->console_interval) {
3587                         bus->console.count -= bus->console_interval;
3588                         sdio_claim_host(bus->sdiodev->func[1]);
3589                         /* Make sure backplane clock is on */
3590                         brcmf_sdio_bus_sleep(bus, false, false);
3591                         if (brcmf_sdio_readconsole(bus) < 0)
3592                                 /* stop on error */
3593                                 bus->console_interval = 0;
3594                         sdio_release_host(bus->sdiodev->func[1]);
3595                 }
3596         }
3597 #endif                          /* DEBUG */
3598
3599         /* On idle timeout clear activity flag and/or turn off clock */
3600         if (!bus->dpc_triggered) {
3601                 rmb();
3602                 if ((!bus->dpc_running) && (bus->idletime > 0) &&
3603                     (bus->clkstate == CLK_AVAIL)) {
3604                         bus->idlecount++;
3605                         if (bus->idlecount > bus->idletime) {
3606                                 brcmf_dbg(SDIO, "idle\n");
3607                                 sdio_claim_host(bus->sdiodev->func[1]);
3608                                 brcmf_sdio_wd_timer(bus, false);
3609                                 bus->idlecount = 0;
3610                                 brcmf_sdio_bus_sleep(bus, true, false);
3611                                 sdio_release_host(bus->sdiodev->func[1]);
3612                         }
3613                 } else {
3614                         bus->idlecount = 0;
3615                 }
3616         } else {
3617                 bus->idlecount = 0;
3618         }
3619 }
3620
3621 static void brcmf_sdio_dataworker(struct work_struct *work)
3622 {
3623         struct brcmf_sdio *bus = container_of(work, struct brcmf_sdio,
3624                                               datawork);
3625
3626         bus->dpc_running = true;
3627         wmb();
3628         while (ACCESS_ONCE(bus->dpc_triggered)) {
3629                 bus->dpc_triggered = false;
3630                 brcmf_sdio_dpc(bus);
3631                 bus->idlecount = 0;
3632         }
3633         bus->dpc_running = false;
3634         if (brcmf_sdiod_freezing(bus->sdiodev)) {
3635                 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DOWN);
3636                 brcmf_sdiod_try_freeze(bus->sdiodev);
3637                 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA);
3638         }
3639 }
3640
3641 static void
3642 brcmf_sdio_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
3643                              struct brcmf_chip *ci, u32 drivestrength)
3644 {
3645         const struct sdiod_drive_str *str_tab = NULL;
3646         u32 str_mask;
3647         u32 str_shift;
3648         u32 i;
3649         u32 drivestrength_sel = 0;
3650         u32 cc_data_temp;
3651         u32 addr;
3652
3653         if (!(ci->cc_caps & CC_CAP_PMU))
3654                 return;
3655
3656         switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) {
3657         case SDIOD_DRVSTR_KEY(BRCM_CC_4330_CHIP_ID, 12):
3658                 str_tab = sdiod_drvstr_tab1_1v8;
3659                 str_mask = 0x00003800;
3660                 str_shift = 11;
3661                 break;
3662         case SDIOD_DRVSTR_KEY(BRCM_CC_4334_CHIP_ID, 17):
3663                 str_tab = sdiod_drvstr_tab6_1v8;
3664                 str_mask = 0x00001800;
3665                 str_shift = 11;
3666                 break;
3667         case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17):
3668                 /* note: 43143 does not support tristate */
3669                 i = ARRAY_SIZE(sdiod_drvstr_tab2_3v3) - 1;
3670                 if (drivestrength >= sdiod_drvstr_tab2_3v3[i].strength) {
3671                         str_tab = sdiod_drvstr_tab2_3v3;
3672                         str_mask = 0x00000007;
3673                         str_shift = 0;
3674                 } else
3675                         brcmf_err("Invalid SDIO Drive strength for chip %s, strength=%d\n",
3676                                   ci->name, drivestrength);
3677                 break;
3678         case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13):
3679                 str_tab = sdiod_drive_strength_tab5_1v8;
3680                 str_mask = 0x00003800;
3681                 str_shift = 11;
3682                 break;
3683         default:
3684                 brcmf_dbg(INFO, "No SDIO driver strength init needed for chip %s rev %d pmurev %d\n",
3685                           ci->name, ci->chiprev, ci->pmurev);
3686                 break;
3687         }
3688
3689         if (str_tab != NULL) {
3690                 struct brcmf_core *pmu = brcmf_chip_get_pmu(ci);
3691
3692                 for (i = 0; str_tab[i].strength != 0; i++) {
3693                         if (drivestrength >= str_tab[i].strength) {
3694                                 drivestrength_sel = str_tab[i].sel;
3695                                 break;
3696                         }
3697                 }
3698                 addr = CORE_CC_REG(pmu->base, chipcontrol_addr);
3699                 brcmf_sdiod_regwl(sdiodev, addr, 1, NULL);
3700                 cc_data_temp = brcmf_sdiod_regrl(sdiodev, addr, NULL);
3701                 cc_data_temp &= ~str_mask;
3702                 drivestrength_sel <<= str_shift;
3703                 cc_data_temp |= drivestrength_sel;
3704                 brcmf_sdiod_regwl(sdiodev, addr, cc_data_temp, NULL);
3705
3706                 brcmf_dbg(INFO, "SDIO: %d mA (req=%d mA) drive strength selected, set to 0x%08x\n",
3707                           str_tab[i].strength, drivestrength, cc_data_temp);
3708         }
3709 }
3710
3711 static int brcmf_sdio_buscoreprep(void *ctx)
3712 {
3713         struct brcmf_sdio_dev *sdiodev = ctx;
3714         int err = 0;
3715         u8 clkval, clkset;
3716
3717         /* Try forcing SDIO core to do ALPAvail request only */
3718         clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_ALP_AVAIL_REQ;
3719         brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
3720         if (err) {
3721                 brcmf_err("error writing for HT off\n");
3722                 return err;
3723         }
3724
3725         /* If register supported, wait for ALPAvail and then force ALP */
3726         /* This may take up to 15 milliseconds */
3727         clkval = brcmf_sdiod_regrb(sdiodev,
3728                                    SBSDIO_FUNC1_CHIPCLKCSR, NULL);
3729
3730         if ((clkval & ~SBSDIO_AVBITS) != clkset) {
3731                 brcmf_err("ChipClkCSR access: wrote 0x%02x read 0x%02x\n",
3732                           clkset, clkval);
3733                 return -EACCES;
3734         }
3735
3736         SPINWAIT(((clkval = brcmf_sdiod_regrb(sdiodev,
3737                                               SBSDIO_FUNC1_CHIPCLKCSR, NULL)),
3738                         !SBSDIO_ALPAV(clkval)),
3739                         PMU_MAX_TRANSITION_DLY);
3740         if (!SBSDIO_ALPAV(clkval)) {
3741                 brcmf_err("timeout on ALPAV wait, clkval 0x%02x\n",
3742                           clkval);
3743                 return -EBUSY;
3744         }
3745
3746         clkset = SBSDIO_FORCE_HW_CLKREQ_OFF | SBSDIO_FORCE_ALP;
3747         brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, clkset, &err);
3748         udelay(65);
3749
3750         /* Also, disable the extra SDIO pull-ups */
3751         brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_SDIOPULLUP, 0, NULL);
3752
3753         return 0;
3754 }
3755
3756 static void brcmf_sdio_buscore_activate(void *ctx, struct brcmf_chip *chip,
3757                                         u32 rstvec)
3758 {
3759         struct brcmf_sdio_dev *sdiodev = ctx;
3760         struct brcmf_core *core;
3761         u32 reg_addr;
3762
3763         /* clear all interrupts */
3764         core = brcmf_chip_get_core(chip, BCMA_CORE_SDIO_DEV);
3765         reg_addr = core->base + offsetof(struct sdpcmd_regs, intstatus);
3766         brcmf_sdiod_regwl(sdiodev, reg_addr, 0xFFFFFFFF, NULL);
3767
3768         if (rstvec)
3769                 /* Write reset vector to address 0 */
3770                 brcmf_sdiod_ramrw(sdiodev, true, 0, (void *)&rstvec,
3771                                   sizeof(rstvec));
3772 }
3773
3774 static u32 brcmf_sdio_buscore_read32(void *ctx, u32 addr)
3775 {
3776         struct brcmf_sdio_dev *sdiodev = ctx;
3777         u32 val, rev;
3778
3779         val = brcmf_sdiod_regrl(sdiodev, addr, NULL);
3780         if ((sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 ||
3781              sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4339) &&
3782             addr == CORE_CC_REG(SI_ENUM_BASE, chipid)) {
3783                 rev = (val & CID_REV_MASK) >> CID_REV_SHIFT;
3784                 if (rev >= 2) {
3785                         val &= ~CID_ID_MASK;
3786                         val |= BRCM_CC_4339_CHIP_ID;
3787                 }
3788         }
3789         return val;
3790 }
3791
3792 static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val)
3793 {
3794         struct brcmf_sdio_dev *sdiodev = ctx;
3795
3796         brcmf_sdiod_regwl(sdiodev, addr, val, NULL);
3797 }
3798
3799 static const struct brcmf_buscore_ops brcmf_sdio_buscore_ops = {
3800         .prepare = brcmf_sdio_buscoreprep,
3801         .activate = brcmf_sdio_buscore_activate,
3802         .read32 = brcmf_sdio_buscore_read32,
3803         .write32 = brcmf_sdio_buscore_write32,
3804 };
3805
3806 static bool
3807 brcmf_sdio_probe_attach(struct brcmf_sdio *bus)
3808 {
3809         struct brcmf_sdio_dev *sdiodev;
3810         u8 clkctl = 0;
3811         int err = 0;
3812         int reg_addr;
3813         u32 reg_val;
3814         u32 drivestrength;
3815
3816         sdiodev = bus->sdiodev;
3817         sdio_claim_host(sdiodev->func[1]);
3818
3819         pr_debug("F1 signature read @0x18000000=0x%4x\n",
3820                  brcmf_sdiod_regrl(sdiodev, SI_ENUM_BASE, NULL));
3821
3822         /*
3823          * Force PLL off until brcmf_chip_attach()
3824          * programs PLL control regs
3825          */
3826
3827         brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
3828                           BRCMF_INIT_CLKCTL1, &err);
3829         if (!err)
3830                 clkctl = brcmf_sdiod_regrb(sdiodev,
3831                                            SBSDIO_FUNC1_CHIPCLKCSR, &err);
3832
3833         if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
3834                 brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
3835                           err, BRCMF_INIT_CLKCTL1, clkctl);
3836                 goto fail;
3837         }
3838
3839         bus->ci = brcmf_chip_attach(sdiodev, &brcmf_sdio_buscore_ops);
3840         if (IS_ERR(bus->ci)) {
3841                 brcmf_err("brcmf_chip_attach failed!\n");
3842                 bus->ci = NULL;
3843                 goto fail;
3844         }
3845         sdiodev->settings = brcmf_get_module_param(sdiodev->dev,
3846                                                    BRCMF_BUSTYPE_SDIO,
3847                                                    bus->ci->chip,
3848                                                    bus->ci->chiprev);
3849         if (!sdiodev->settings) {
3850                 brcmf_err("Failed to get device parameters\n");
3851                 goto fail;
3852         }
3853         /* platform specific configuration:
3854          *   alignments must be at least 4 bytes for ADMA
3855          */
3856         bus->head_align = ALIGNMENT;
3857         bus->sgentry_align = ALIGNMENT;
3858         if (sdiodev->settings->bus.sdio.sd_head_align > ALIGNMENT)
3859                 bus->head_align = sdiodev->settings->bus.sdio.sd_head_align;
3860         if (sdiodev->settings->bus.sdio.sd_sgentry_align > ALIGNMENT)
3861                 bus->sgentry_align =
3862                                 sdiodev->settings->bus.sdio.sd_sgentry_align;
3863
3864         /* allocate scatter-gather table. sg support
3865          * will be disabled upon allocation failure.
3866          */
3867         brcmf_sdiod_sgtable_alloc(sdiodev);
3868
3869 #ifdef CONFIG_PM_SLEEP
3870         /* wowl can be supported when KEEP_POWER is true and (WAKE_SDIO_IRQ
3871          * is true or when platform data OOB irq is true).
3872          */
3873         if ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_KEEP_POWER) &&
3874             ((sdio_get_host_pm_caps(sdiodev->func[1]) & MMC_PM_WAKE_SDIO_IRQ) ||
3875              (sdiodev->settings->bus.sdio.oob_irq_supported)))
3876                 sdiodev->bus_if->wowl_supported = true;
3877 #endif
3878
3879         if (brcmf_sdio_kso_init(bus)) {
3880                 brcmf_err("error enabling KSO\n");
3881                 goto fail;
3882         }
3883
3884         if (sdiodev->settings->bus.sdio.drive_strength)
3885                 drivestrength = sdiodev->settings->bus.sdio.drive_strength;
3886         else
3887                 drivestrength = DEFAULT_SDIO_DRIVE_STRENGTH;
3888         brcmf_sdio_drivestrengthinit(sdiodev, bus->ci, drivestrength);
3889
3890         /* Set card control so an SDIO card reset does a WLAN backplane reset */
3891         reg_val = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, &err);
3892         if (err)
3893                 goto fail;
3894
3895         reg_val |= SDIO_CCCR_BRCM_CARDCTRL_WLANRESET;
3896
3897         brcmf_sdiod_regwb(sdiodev, SDIO_CCCR_BRCM_CARDCTRL, reg_val, &err);
3898         if (err)
3899                 goto fail;
3900
3901         /* set PMUControl so a backplane reset does PMU state reload */
3902         reg_addr = CORE_CC_REG(brcmf_chip_get_pmu(bus->ci)->base, pmucontrol);
3903         reg_val = brcmf_sdiod_regrl(sdiodev, reg_addr, &err);
3904         if (err)
3905                 goto fail;
3906
3907         reg_val |= (BCMA_CC_PMU_CTL_RES_RELOAD << BCMA_CC_PMU_CTL_RES_SHIFT);
3908
3909         brcmf_sdiod_regwl(sdiodev, reg_addr, reg_val, &err);
3910         if (err)
3911                 goto fail;
3912
3913         sdio_release_host(sdiodev->func[1]);
3914
3915         brcmu_pktq_init(&bus->txq, (PRIOMASK + 1), TXQLEN);
3916
3917         /* allocate header buffer */
3918         bus->hdrbuf = kzalloc(MAX_HDR_READ + bus->head_align, GFP_KERNEL);
3919         if (!bus->hdrbuf)
3920                 return false;
3921         /* Locate an appropriately-aligned portion of hdrbuf */
3922         bus->rxhdr = (u8 *) roundup((unsigned long)&bus->hdrbuf[0],
3923                                     bus->head_align);
3924
3925         /* Set the poll and/or interrupt flags */
3926         bus->intr = true;
3927         bus->poll = false;
3928         if (bus->poll)
3929                 bus->pollrate = 1;
3930
3931         return true;
3932
3933 fail:
3934         sdio_release_host(sdiodev->func[1]);
3935         return false;
3936 }
3937
3938 static int
3939 brcmf_sdio_watchdog_thread(void *data)
3940 {
3941         struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
3942         int wait;
3943
3944         allow_signal(SIGTERM);
3945         /* Run until signal received */
3946         brcmf_sdiod_freezer_count(bus->sdiodev);
3947         while (1) {
3948                 if (kthread_should_stop())
3949                         break;
3950                 brcmf_sdiod_freezer_uncount(bus->sdiodev);
3951                 wait = wait_for_completion_interruptible(&bus->watchdog_wait);
3952                 brcmf_sdiod_freezer_count(bus->sdiodev);
3953                 brcmf_sdiod_try_freeze(bus->sdiodev);
3954                 if (!wait) {
3955                         brcmf_sdio_bus_watchdog(bus);
3956                         /* Count the tick for reference */
3957                         bus->sdcnt.tickcnt++;
3958                         reinit_completion(&bus->watchdog_wait);
3959                 } else
3960                         break;
3961         }
3962         return 0;
3963 }
3964
3965 static void
3966 brcmf_sdio_watchdog(unsigned long data)
3967 {
3968         struct brcmf_sdio *bus = (struct brcmf_sdio *)data;
3969
3970         if (bus->watchdog_tsk) {
3971                 complete(&bus->watchdog_wait);
3972                 /* Reschedule the watchdog */
3973                 if (bus->wd_active)
3974                         mod_timer(&bus->timer,
3975                                   jiffies + BRCMF_WD_POLL);
3976         }
3977 }
3978
3979 static const struct brcmf_bus_ops brcmf_sdio_bus_ops = {
3980         .stop = brcmf_sdio_bus_stop,
3981         .preinit = brcmf_sdio_bus_preinit,
3982         .txdata = brcmf_sdio_bus_txdata,
3983         .txctl = brcmf_sdio_bus_txctl,
3984         .rxctl = brcmf_sdio_bus_rxctl,
3985         .gettxq = brcmf_sdio_bus_gettxq,
3986         .wowl_config = brcmf_sdio_wowl_config,
3987         .get_ramsize = brcmf_sdio_bus_get_ramsize,
3988         .get_memdump = brcmf_sdio_bus_get_memdump,
3989 };
3990
3991 static void brcmf_sdio_firmware_callback(struct device *dev, int err,
3992                                          const struct firmware *code,
3993                                          void *nvram, u32 nvram_len)
3994 {
3995         struct brcmf_bus *bus_if;
3996         struct brcmf_sdio_dev *sdiodev;
3997         struct brcmf_sdio *bus;
3998         u8 saveclk;
3999
4000         brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
4001         bus_if = dev_get_drvdata(dev);
4002         sdiodev = bus_if->bus_priv.sdio;
4003         if (err)
4004                 goto fail;
4005
4006         if (!bus_if->drvr)
4007                 return;
4008
4009         bus = sdiodev->bus;
4010
4011         /* try to download image and nvram to the dongle */
4012         bus->alp_only = true;
4013         err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
4014         if (err)
4015                 goto fail;
4016         bus->alp_only = false;
4017
4018         /* Start the watchdog timer */
4019         bus->sdcnt.tickcnt = 0;
4020         brcmf_sdio_wd_timer(bus, true);
4021
4022         sdio_claim_host(sdiodev->func[1]);
4023
4024         /* Make sure backplane clock is on, needed to generate F2 interrupt */
4025         brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
4026         if (bus->clkstate != CLK_AVAIL)
4027                 goto release;
4028
4029         /* Force clocks on backplane to be sure F2 interrupt propagates */
4030         saveclk = brcmf_sdiod_regrb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
4031         if (!err) {
4032                 brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
4033                                   (saveclk | SBSDIO_FORCE_HT), &err);
4034         }
4035         if (err) {
4036                 brcmf_err("Failed to force clock for F2: err %d\n", err);
4037                 goto release;
4038         }
4039
4040         /* Enable function 2 (frame transfers) */
4041         w_sdreg32(bus, SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT,
4042                   offsetof(struct sdpcmd_regs, tosbmailboxdata));
4043         err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
4044
4045
4046         brcmf_dbg(INFO, "enable F2: err=%d\n", err);
4047
4048         /* If F2 successfully enabled, set core and enable interrupts */
4049         if (!err) {
4050                 /* Set up the interrupt mask and enable interrupts */
4051                 bus->hostintmask = HOSTINTMASK;
4052                 w_sdreg32(bus, bus->hostintmask,
4053                           offsetof(struct sdpcmd_regs, hostintmask));
4054
4055                 brcmf_sdiod_regwb(sdiodev, SBSDIO_WATERMARK, 8, &err);
4056         } else {
4057                 /* Disable F2 again */
4058                 sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
4059                 goto release;
4060         }
4061
4062         if (brcmf_chip_sr_capable(bus->ci)) {
4063                 brcmf_sdio_sr_init(bus);
4064         } else {
4065                 /* Restore previous clock setting */
4066                 brcmf_sdiod_regwb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
4067                                   saveclk, &err);
4068         }
4069
4070         if (err == 0) {
4071                 /* Allow full data communication using DPC from now on. */
4072                 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA);
4073
4074                 err = brcmf_sdiod_intr_register(sdiodev);
4075                 if (err != 0)
4076                         brcmf_err("intr register failed:%d\n", err);
4077         }
4078
4079         /* If we didn't come up, turn off backplane clock */
4080         if (err != 0)
4081                 brcmf_sdio_clkctl(bus, CLK_NONE, false);
4082
4083         sdio_release_host(sdiodev->func[1]);
4084
4085         err = brcmf_bus_started(dev);
4086         if (err != 0) {
4087                 brcmf_err("dongle is not responding\n");
4088                 goto fail;
4089         }
4090         return;
4091
4092 release:
4093         sdio_release_host(sdiodev->func[1]);
4094 fail:
4095         brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
4096         device_release_driver(dev);
4097         device_release_driver(&sdiodev->func[2]->dev);
4098 }
4099
4100 struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
4101 {
4102         int ret;
4103         struct brcmf_sdio *bus;
4104         struct workqueue_struct *wq;
4105
4106         brcmf_dbg(TRACE, "Enter\n");
4107
4108         /* Allocate private bus interface state */
4109         bus = kzalloc(sizeof(struct brcmf_sdio), GFP_ATOMIC);
4110         if (!bus)
4111                 goto fail;
4112
4113         bus->sdiodev = sdiodev;
4114         sdiodev->bus = bus;
4115         skb_queue_head_init(&bus->glom);
4116         bus->txbound = BRCMF_TXBOUND;
4117         bus->rxbound = BRCMF_RXBOUND;
4118         bus->txminmax = BRCMF_TXMINMAX;
4119         bus->tx_seq = SDPCM_SEQ_WRAP - 1;
4120
4121         /* single-threaded workqueue */
4122         wq = alloc_ordered_workqueue("brcmf_wq/%s", WQ_MEM_RECLAIM,
4123                                      dev_name(&sdiodev->func[1]->dev));
4124         if (!wq) {
4125                 brcmf_err("insufficient memory to create txworkqueue\n");
4126                 goto fail;
4127         }
4128         brcmf_sdiod_freezer_count(sdiodev);
4129         INIT_WORK(&bus->datawork, brcmf_sdio_dataworker);
4130         bus->brcmf_wq = wq;
4131
4132         /* attempt to attach to the dongle */
4133         if (!(brcmf_sdio_probe_attach(bus))) {
4134                 brcmf_err("brcmf_sdio_probe_attach failed\n");
4135                 goto fail;
4136         }
4137
4138         spin_lock_init(&bus->rxctl_lock);
4139         spin_lock_init(&bus->txq_lock);
4140         init_waitqueue_head(&bus->ctrl_wait);
4141         init_waitqueue_head(&bus->dcmd_resp_wait);
4142
4143         /* Set up the watchdog timer */
4144         init_timer(&bus->timer);
4145         bus->timer.data = (unsigned long)bus;
4146         bus->timer.function = brcmf_sdio_watchdog;
4147
4148         /* Initialize watchdog thread */
4149         init_completion(&bus->watchdog_wait);
4150         bus->watchdog_tsk = kthread_run(brcmf_sdio_watchdog_thread,
4151                                         bus, "brcmf_wdog/%s",
4152                                         dev_name(&sdiodev->func[1]->dev));
4153         if (IS_ERR(bus->watchdog_tsk)) {
4154                 pr_warn("brcmf_watchdog thread failed to start\n");
4155                 bus->watchdog_tsk = NULL;
4156         }
4157         /* Initialize DPC thread */
4158         bus->dpc_triggered = false;
4159         bus->dpc_running = false;
4160
4161         /* Assign bus interface call back */
4162         bus->sdiodev->bus_if->dev = bus->sdiodev->dev;
4163         bus->sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
4164         bus->sdiodev->bus_if->chip = bus->ci->chip;
4165         bus->sdiodev->bus_if->chiprev = bus->ci->chiprev;
4166
4167         /* default sdio bus header length for tx packet */
4168         bus->tx_hdrlen = SDPCM_HWHDR_LEN + SDPCM_SWHDR_LEN;
4169
4170         /* Attach to the common layer, reserve hdr space */
4171         ret = brcmf_attach(bus->sdiodev->dev, bus->sdiodev->settings);
4172         if (ret != 0) {
4173                 brcmf_err("brcmf_attach failed\n");
4174                 goto fail;
4175         }
4176
4177         /* allocate scatter-gather table. sg support
4178          * will be disabled upon allocation failure.
4179          */
4180         brcmf_sdiod_sgtable_alloc(bus->sdiodev);
4181
4182         /* Query the F2 block size, set roundup accordingly */
4183         bus->blocksize = bus->sdiodev->func[2]->cur_blksize;
4184         bus->roundup = min(max_roundup, bus->blocksize);
4185
4186         /* Allocate buffers */
4187         if (bus->sdiodev->bus_if->maxctl) {
4188                 bus->sdiodev->bus_if->maxctl += bus->roundup;
4189                 bus->rxblen =
4190                     roundup((bus->sdiodev->bus_if->maxctl + SDPCM_HDRLEN),
4191                             ALIGNMENT) + bus->head_align;
4192                 bus->rxbuf = kmalloc(bus->rxblen, GFP_ATOMIC);
4193                 if (!(bus->rxbuf)) {
4194                         brcmf_err("rxbuf allocation failed\n");
4195                         goto fail;
4196                 }
4197         }
4198
4199         sdio_claim_host(bus->sdiodev->func[1]);
4200
4201         /* Disable F2 to clear any intermediate frame state on the dongle */
4202         sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
4203
4204         bus->rxflow = false;
4205
4206         /* Done with backplane-dependent accesses, can drop clock... */
4207         brcmf_sdiod_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, 0, NULL);
4208
4209         sdio_release_host(bus->sdiodev->func[1]);
4210
4211         /* ...and initialize clock/power states */
4212         bus->clkstate = CLK_SDONLY;
4213         bus->idletime = BRCMF_IDLE_INTERVAL;
4214         bus->idleclock = BRCMF_IDLE_ACTIVE;
4215
4216         /* SR state */
4217         bus->sr_enabled = false;
4218
4219         brcmf_sdio_debugfs_create(bus);
4220         brcmf_dbg(INFO, "completed!!\n");
4221
4222         ret = brcmf_fw_map_chip_to_name(bus->ci->chip, bus->ci->chiprev,
4223                                         brcmf_sdio_fwnames,
4224                                         ARRAY_SIZE(brcmf_sdio_fwnames),
4225                                         sdiodev->fw_name, sdiodev->nvram_name);
4226         if (ret)
4227                 goto fail;
4228
4229         ret = brcmf_fw_get_firmwares(sdiodev->dev, BRCMF_FW_REQUEST_NVRAM,
4230                                      sdiodev->fw_name, sdiodev->nvram_name,
4231                                      brcmf_sdio_firmware_callback);
4232         if (ret != 0) {
4233                 brcmf_err("async firmware request failed: %d\n", ret);
4234                 goto fail;
4235         }
4236
4237         return bus;
4238
4239 fail:
4240         brcmf_sdio_remove(bus);
4241         return NULL;
4242 }
4243
4244 /* Detach and free everything */
4245 void brcmf_sdio_remove(struct brcmf_sdio *bus)
4246 {
4247         brcmf_dbg(TRACE, "Enter\n");
4248
4249         if (bus) {
4250                 /* De-register interrupt handler */
4251                 brcmf_sdiod_intr_unregister(bus->sdiodev);
4252
4253                 brcmf_detach(bus->sdiodev->dev);
4254
4255                 cancel_work_sync(&bus->datawork);
4256                 if (bus->brcmf_wq)
4257                         destroy_workqueue(bus->brcmf_wq);
4258
4259                 if (bus->ci) {
4260                         if (bus->sdiodev->state != BRCMF_SDIOD_NOMEDIUM) {
4261                                 sdio_claim_host(bus->sdiodev->func[1]);
4262                                 brcmf_sdio_wd_timer(bus, false);
4263                                 brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
4264                                 /* Leave the device in state where it is
4265                                  * 'passive'. This is done by resetting all
4266                                  * necessary cores.
4267                                  */
4268                                 msleep(20);
4269                                 brcmf_chip_set_passive(bus->ci);
4270                                 brcmf_sdio_clkctl(bus, CLK_NONE, false);
4271                                 sdio_release_host(bus->sdiodev->func[1]);
4272                         }
4273                         brcmf_chip_detach(bus->ci);
4274                 }
4275                 if (bus->sdiodev->settings)
4276                         brcmf_release_module_param(bus->sdiodev->settings);
4277
4278                 kfree(bus->rxbuf);
4279                 kfree(bus->hdrbuf);
4280                 kfree(bus);
4281         }
4282
4283         brcmf_dbg(TRACE, "Disconnected\n");
4284 }
4285
4286 void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active)
4287 {
4288         /* Totally stop the timer */
4289         if (!active && bus->wd_active) {
4290                 del_timer_sync(&bus->timer);
4291                 bus->wd_active = false;
4292                 return;
4293         }
4294
4295         /* don't start the wd until fw is loaded */
4296         if (bus->sdiodev->state != BRCMF_SDIOD_DATA)
4297                 return;
4298
4299         if (active) {
4300                 if (!bus->wd_active) {
4301                         /* Create timer again when watchdog period is
4302                            dynamically changed or in the first instance
4303                          */
4304                         bus->timer.expires = jiffies + BRCMF_WD_POLL;
4305                         add_timer(&bus->timer);
4306                         bus->wd_active = true;
4307                 } else {
4308                         /* Re arm the timer, at last watchdog period */
4309                         mod_timer(&bus->timer, jiffies + BRCMF_WD_POLL);
4310                 }
4311         }
4312 }
4313
4314 int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep)
4315 {
4316         int ret;
4317
4318         sdio_claim_host(bus->sdiodev->func[1]);
4319         ret = brcmf_sdio_bus_sleep(bus, sleep, false);
4320         sdio_release_host(bus->sdiodev->func[1]);
4321
4322         return ret;
4323 }
4324