3 #include <linux/module.h>
4 #include <linux/init.h>
6 #include <linux/wait.h>
7 #include <linux/timer.h>
8 #include <linux/skbuff.h>
9 #include <linux/netdevice.h>
10 #include <linux/workqueue.h>
11 #include <linux/wireless.h>
12 #include <net/iw_handler.h>
14 #include <pcmcia/cs_types.h>
15 #include <pcmcia/cs.h>
16 #include <pcmcia/cistpl.h>
17 #include <pcmcia/cisreg.h>
18 #include <pcmcia/ds.h>
22 #include "hostap_wlan.h"
25 static dev_info_t dev_info = "hostap_cs";
27 MODULE_AUTHOR("Jouni Malinen");
28 MODULE_DESCRIPTION("Support for Intersil Prism2-based 802.11 wireless LAN "
30 MODULE_SUPPORTED_DEVICE("Intersil Prism2-based WLAN cards (PC Card)");
31 MODULE_LICENSE("GPL");
34 static int ignore_cis_vcc;
35 module_param(ignore_cis_vcc, int, 0444);
36 MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
39 /* struct local_info::hw_priv */
40 struct hostap_cs_priv {
42 struct pcmcia_device *link;
43 int sandisk_connectplus;
47 #ifdef PRISM2_IO_DEBUG
49 static inline void hfa384x_outb_debug(struct net_device *dev, int a, u8 v)
51 struct hostap_interface *iface;
55 iface = netdev_priv(dev);
57 spin_lock_irqsave(&local->lock, flags);
58 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTB, a, v);
59 outb(v, dev->base_addr + a);
60 spin_unlock_irqrestore(&local->lock, flags);
63 static inline u8 hfa384x_inb_debug(struct net_device *dev, int a)
65 struct hostap_interface *iface;
70 iface = netdev_priv(dev);
72 spin_lock_irqsave(&local->lock, flags);
73 v = inb(dev->base_addr + a);
74 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INB, a, v);
75 spin_unlock_irqrestore(&local->lock, flags);
79 static inline void hfa384x_outw_debug(struct net_device *dev, int a, u16 v)
81 struct hostap_interface *iface;
85 iface = netdev_priv(dev);
87 spin_lock_irqsave(&local->lock, flags);
88 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTW, a, v);
89 outw(v, dev->base_addr + a);
90 spin_unlock_irqrestore(&local->lock, flags);
93 static inline u16 hfa384x_inw_debug(struct net_device *dev, int a)
95 struct hostap_interface *iface;
100 iface = netdev_priv(dev);
101 local = iface->local;
102 spin_lock_irqsave(&local->lock, flags);
103 v = inw(dev->base_addr + a);
104 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INW, a, v);
105 spin_unlock_irqrestore(&local->lock, flags);
109 static inline void hfa384x_outsw_debug(struct net_device *dev, int a,
112 struct hostap_interface *iface;
116 iface = netdev_priv(dev);
117 local = iface->local;
118 spin_lock_irqsave(&local->lock, flags);
119 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_OUTSW, a, wc);
120 outsw(dev->base_addr + a, buf, wc);
121 spin_unlock_irqrestore(&local->lock, flags);
124 static inline void hfa384x_insw_debug(struct net_device *dev, int a,
127 struct hostap_interface *iface;
131 iface = netdev_priv(dev);
132 local = iface->local;
133 spin_lock_irqsave(&local->lock, flags);
134 prism2_io_debug_add(dev, PRISM2_IO_DEBUG_CMD_INSW, a, wc);
135 insw(dev->base_addr + a, buf, wc);
136 spin_unlock_irqrestore(&local->lock, flags);
139 #define HFA384X_OUTB(v,a) hfa384x_outb_debug(dev, (a), (v))
140 #define HFA384X_INB(a) hfa384x_inb_debug(dev, (a))
141 #define HFA384X_OUTW(v,a) hfa384x_outw_debug(dev, (a), (v))
142 #define HFA384X_INW(a) hfa384x_inw_debug(dev, (a))
143 #define HFA384X_OUTSW(a, buf, wc) hfa384x_outsw_debug(dev, (a), (buf), (wc))
144 #define HFA384X_INSW(a, buf, wc) hfa384x_insw_debug(dev, (a), (buf), (wc))
146 #else /* PRISM2_IO_DEBUG */
148 #define HFA384X_OUTB(v,a) outb((v), dev->base_addr + (a))
149 #define HFA384X_INB(a) inb(dev->base_addr + (a))
150 #define HFA384X_OUTW(v,a) outw((v), dev->base_addr + (a))
151 #define HFA384X_INW(a) inw(dev->base_addr + (a))
152 #define HFA384X_INSW(a, buf, wc) insw(dev->base_addr + (a), buf, wc)
153 #define HFA384X_OUTSW(a, buf, wc) outsw(dev->base_addr + (a), buf, wc)
155 #endif /* PRISM2_IO_DEBUG */
158 static int hfa384x_from_bap(struct net_device *dev, u16 bap, void *buf,
164 d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
168 HFA384X_INSW(d_off, buf, len / 2);
172 *((char *) pos) = HFA384X_INB(d_off);
178 static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
183 d_off = (bap == 1) ? HFA384X_DATA1_OFF : HFA384X_DATA0_OFF;
187 HFA384X_OUTSW(d_off, buf, len / 2);
191 HFA384X_OUTB(*((char *) pos), d_off);
197 /* FIX: This might change at some point.. */
198 #include "hostap_hw.c"
202 static void prism2_detach(struct pcmcia_device *p_dev);
203 static void prism2_release(u_long arg);
204 static int prism2_config(struct pcmcia_device *link);
207 static int prism2_pccard_card_present(local_info_t *local)
209 struct hostap_cs_priv *hw_priv = local->hw_priv;
210 if (hw_priv != NULL && hw_priv->link != NULL && pcmcia_dev_present(hw_priv->link))
217 * SanDisk CompactFlash WLAN Flashcard - Product Manual v1.0
218 * Document No. 20-10-00058, January 2004
219 * http://www.sandisk.com/pdf/industrial/ProdManualCFWLANv1.0.pdf
221 #define SANDISK_WLAN_ACTIVATION_OFF 0x40
222 #define SANDISK_HCR_OFF 0x42
225 static void sandisk_set_iobase(local_info_t *local)
229 struct hostap_cs_priv *hw_priv = local->hw_priv;
232 reg.Action = CS_WRITE;
233 reg.Offset = 0x10; /* 0x3f0 IO base 1 */
234 reg.Value = hw_priv->link->io.BasePort1 & 0x00ff;
235 res = pcmcia_access_configuration_register(hw_priv->link,
237 if (res != CS_SUCCESS) {
238 printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 0 -"
244 reg.Action = CS_WRITE;
245 reg.Offset = 0x12; /* 0x3f2 IO base 2 */
246 reg.Value = (hw_priv->link->io.BasePort1 & 0xff00) >> 8;
247 res = pcmcia_access_configuration_register(hw_priv->link,
249 if (res != CS_SUCCESS) {
250 printk(KERN_DEBUG "Prism3 SanDisk - failed to set I/O base 1 -"
256 static void sandisk_write_hcr(local_info_t *local, int hcr)
258 struct net_device *dev = local->dev;
261 HFA384X_OUTB(0x80, SANDISK_WLAN_ACTIVATION_OFF);
263 for (i = 0; i < 10; i++) {
264 HFA384X_OUTB(hcr, SANDISK_HCR_OFF);
267 HFA384X_OUTB(0x45, SANDISK_WLAN_ACTIVATION_OFF);
271 static int sandisk_enable_wireless(struct net_device *dev)
275 struct hostap_interface *iface = netdev_priv(dev);
276 local_info_t *local = iface->local;
278 cisparse_t *parse = NULL;
280 struct hostap_cs_priv *hw_priv = local->hw_priv;
282 if (hw_priv->link->io.NumPorts1 < 0x42) {
283 /* Not enough ports to be SanDisk multi-function card */
288 parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL);
294 tuple.Attributes = TUPLE_RETURN_COMMON;
295 tuple.TupleData = buf;
296 tuple.TupleDataMax = sizeof(buf);
297 tuple.TupleOffset = 0;
299 if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) {
300 /* No SanDisk manfid found */
305 tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
306 if (pcmcia_get_first_tuple(hw_priv->link, &tuple) ||
307 pcmcia_get_tuple_data(hw_priv->link, &tuple) ||
308 pcmcia_parse_tuple(hw_priv->link, &tuple, parse) ||
309 parse->longlink_mfc.nfn < 2) {
310 /* No multi-function links found */
315 printk(KERN_DEBUG "%s: Multi-function SanDisk ConnectPlus detected"
316 " - using vendor-specific initialization\n", dev->name);
317 hw_priv->sandisk_connectplus = 1;
320 reg.Action = CS_WRITE;
321 reg.Offset = CISREG_COR;
322 reg.Value = COR_SOFT_RESET;
323 res = pcmcia_access_configuration_register(hw_priv->link,
325 if (res != CS_SUCCESS) {
326 printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
333 reg.Action = CS_WRITE;
334 reg.Offset = CISREG_COR;
336 * Do not enable interrupts here to avoid some bogus events. Interrupts
337 * will be enabled during the first cor_sreset call.
339 reg.Value = COR_LEVEL_REQ | 0x8 | COR_ADDR_DECODE | COR_FUNC_ENA;
340 res = pcmcia_access_configuration_register(hw_priv->link,
342 if (res != CS_SUCCESS) {
343 printk(KERN_DEBUG "%s: SanDisk - COR sreset failed (%d)\n",
349 sandisk_set_iobase(local);
351 HFA384X_OUTB(0xc5, SANDISK_WLAN_ACTIVATION_OFF);
353 HFA384X_OUTB(0x4b, SANDISK_WLAN_ACTIVATION_OFF);
362 static void prism2_pccard_cor_sreset(local_info_t *local)
366 struct hostap_cs_priv *hw_priv = local->hw_priv;
368 if (!prism2_pccard_card_present(local))
372 reg.Action = CS_READ;
373 reg.Offset = CISREG_COR;
375 res = pcmcia_access_configuration_register(hw_priv->link,
377 if (res != CS_SUCCESS) {
378 printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 1 (%d)\n",
382 printk(KERN_DEBUG "prism2_pccard_cor_sreset: original COR %02x\n",
385 reg.Action = CS_WRITE;
386 reg.Value |= COR_SOFT_RESET;
387 res = pcmcia_access_configuration_register(hw_priv->link,
389 if (res != CS_SUCCESS) {
390 printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 2 (%d)\n",
395 mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
397 reg.Value &= ~COR_SOFT_RESET;
398 if (hw_priv->sandisk_connectplus)
399 reg.Value |= COR_IREQ_ENA;
400 res = pcmcia_access_configuration_register(hw_priv->link,
402 if (res != CS_SUCCESS) {
403 printk(KERN_DEBUG "prism2_pccard_cor_sreset failed 3 (%d)\n",
408 mdelay(hw_priv->sandisk_connectplus ? 5 : 2);
410 if (hw_priv->sandisk_connectplus)
411 sandisk_set_iobase(local);
415 static void prism2_pccard_genesis_reset(local_info_t *local, int hcr)
420 struct hostap_cs_priv *hw_priv = local->hw_priv;
422 if (!prism2_pccard_card_present(local))
425 if (hw_priv->sandisk_connectplus) {
426 sandisk_write_hcr(local, hcr);
431 reg.Action = CS_READ;
432 reg.Offset = CISREG_COR;
434 res = pcmcia_access_configuration_register(hw_priv->link,
436 if (res != CS_SUCCESS) {
437 printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 1 "
441 printk(KERN_DEBUG "prism2_pccard_genesis_sreset: original COR %02x\n",
445 reg.Action = CS_WRITE;
446 reg.Value |= COR_SOFT_RESET;
447 res = pcmcia_access_configuration_register(hw_priv->link,
449 if (res != CS_SUCCESS) {
450 printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 2 "
457 /* Setup Genesis mode */
458 reg.Action = CS_WRITE;
460 reg.Offset = CISREG_CCSR;
461 res = pcmcia_access_configuration_register(hw_priv->link,
463 if (res != CS_SUCCESS) {
464 printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 3 "
470 reg.Action = CS_WRITE;
471 reg.Offset = CISREG_COR;
472 reg.Value = old_cor & ~COR_SOFT_RESET;
473 res = pcmcia_access_configuration_register(hw_priv->link,
475 if (res != CS_SUCCESS) {
476 printk(KERN_DEBUG "prism2_pccard_genesis_sreset failed 4 "
485 static struct prism2_helper_functions prism2_pccard_funcs =
487 .card_present = prism2_pccard_card_present,
488 .cor_sreset = prism2_pccard_cor_sreset,
489 .genesis_reset = prism2_pccard_genesis_reset,
490 .hw_type = HOSTAP_HW_PCCARD,
494 /* allocate local data and register with CardServices
495 * initialize dev_link structure, but do not configure the card yet */
496 static int hostap_cs_probe(struct pcmcia_device *p_dev)
500 PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
501 p_dev->conf.IntType = INT_MEMORY_AND_IO;
503 ret = prism2_config(p_dev);
505 PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
512 static void prism2_detach(struct pcmcia_device *link)
514 PDEBUG(DEBUG_FLOW, "prism2_detach\n");
516 prism2_release((u_long)link);
518 /* release net devices */
520 struct hostap_cs_priv *hw_priv;
521 struct net_device *dev;
522 struct hostap_interface *iface;
524 iface = netdev_priv(dev);
525 hw_priv = iface->local->hw_priv;
526 prism2_free_local_data(dev);
532 #define CS_CHECK(fn, ret) \
533 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
536 /* run after a CARD_INSERTION event is received to configure the PCMCIA
537 * socket and make the device available to the system */
539 struct prism2_config_data {
540 cistpl_cftable_entry_t dflt;
544 static int prism2_config_check(struct pcmcia_device *p_dev,
545 cistpl_cftable_entry_t *cfg,
548 struct prism2_config_data *cfg_mem = priv_data;
550 if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
551 cfg_mem->dflt = *cfg;
555 p_dev->conf.ConfigIndex = cfg->index;
556 PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
557 "(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
559 /* Does this card need audio output? */
560 if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
561 p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
562 p_dev->conf.Status = CCSR_AUDIO_ENA;
565 /* Use power settings for Vcc and Vpp if present */
566 /* Note that the CIS values need to be rescaled */
567 if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
568 if (cfg_mem->conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] /
569 10000 && !ignore_cis_vcc) {
570 PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping"
574 } else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
575 if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] /
576 10000 && !ignore_cis_vcc) {
577 PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch "
578 "- skipping this entry\n");
583 if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
584 p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
585 else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
586 p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
588 /* Do we need to allocate an interrupt? */
589 if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
590 p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
591 else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
592 /* At least Compaq WL200 does not have IRQInfo1 set,
593 * but it does not work without interrupts.. */
594 printk(KERN_WARNING "Config has no IRQ info, but trying to "
595 "enable IRQ anyway..\n");
596 p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
599 /* IO window settings */
600 PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
601 "cfg_mem->dflt.io.nwin=%d\n",
602 cfg->io.nwin, cfg_mem->dflt.io.nwin);
603 p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
604 if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
605 cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
606 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
607 PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
608 "io.base=0x%04x, len=%d\n", io->flags,
609 io->win[0].base, io->win[0].len);
610 if (!(io->flags & CISTPL_IO_8BIT))
611 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
612 if (!(io->flags & CISTPL_IO_16BIT))
613 p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
614 p_dev->io.IOAddrLines = io->flags &
615 CISTPL_IO_LINES_MASK;
616 p_dev->io.BasePort1 = io->win[0].base;
617 p_dev->io.NumPorts1 = io->win[0].len;
619 p_dev->io.Attributes2 = p_dev->io.Attributes1;
620 p_dev->io.BasePort2 = io->win[1].base;
621 p_dev->io.NumPorts2 = io->win[1].len;
625 /* This reserves IO space but doesn't actually enable it */
626 return pcmcia_request_io(p_dev, &p_dev->io);
629 static int prism2_config(struct pcmcia_device *link)
631 struct net_device *dev;
632 struct hostap_interface *iface;
633 struct prism2_config_data *cfg_mem;
636 int last_fn, last_ret;
637 struct hostap_cs_priv *hw_priv;
639 PDEBUG(DEBUG_FLOW, "prism2_config()\n");
641 cfg_mem = kzalloc(sizeof(struct prism2_config_data), GFP_KERNEL);
645 hw_priv = kzalloc(sizeof(*hw_priv), GFP_KERNEL);
646 if (hw_priv == NULL) {
651 CS_CHECK(GetConfigurationInfo,
652 pcmcia_get_configuration_info(link, &cfg_mem->conf));
654 /* Look for an appropriate configuration table entry in the CIS */
655 last_ret = pcmcia_loop_config(link, prism2_config_check, cfg_mem);
658 printk(KERN_ERR "GetNextTuple(): No matching "
659 "CIS configuration. Maybe you need the "
660 "ignore_cis_vcc=1 parameter.\n");
661 cs_error(link, RequestIO, last_ret);
665 /* Need to allocate net_device before requesting IRQ handler */
666 dev = prism2_init_local_data(&prism2_pccard_funcs, 0,
667 &handle_to_dev(link));
672 iface = netdev_priv(dev);
673 local = iface->local;
674 local->hw_priv = hw_priv;
675 hw_priv->link = link;
676 strcpy(hw_priv->node.dev_name, dev->name);
677 link->dev_node = &hw_priv->node;
680 * Allocate an interrupt line. Note that this does not assign a
681 * handler to the interrupt, unless the 'Handler' member of the
682 * irq structure is initialized.
684 if (link->conf.Attributes & CONF_ENABLE_IRQ) {
685 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
686 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
687 link->irq.Handler = prism2_interrupt;
688 link->irq.Instance = dev;
690 pcmcia_request_irq(link, &link->irq));
694 * This actually configures the PCMCIA socket -- setting up
695 * the I/O windows and the interrupt mapping, and putting the
696 * card and host interface into "Memory and IO" mode.
698 CS_CHECK(RequestConfiguration,
699 pcmcia_request_configuration(link, &link->conf));
701 dev->irq = link->irq.AssignedIRQ;
702 dev->base_addr = link->io.BasePort1;
704 /* Finally, report what we've done */
705 printk(KERN_INFO "%s: index 0x%02x: ",
706 dev_info, link->conf.ConfigIndex);
708 printk(", Vpp %d.%d", link->conf.Vpp / 10,
709 link->conf.Vpp % 10);
710 if (link->conf.Attributes & CONF_ENABLE_IRQ)
711 printk(", irq %d", link->irq.AssignedIRQ);
712 if (link->io.NumPorts1)
713 printk(", io 0x%04x-0x%04x", link->io.BasePort1,
714 link->io.BasePort1+link->io.NumPorts1-1);
715 if (link->io.NumPorts2)
716 printk(" & 0x%04x-0x%04x", link->io.BasePort2,
717 link->io.BasePort2+link->io.NumPorts2-1);
722 sandisk_enable_wireless(dev);
724 ret = prism2_hw_config(dev, 1);
726 ret = hostap_hw_ready(dev);
727 if (ret == 0 && local->ddev)
728 strcpy(hw_priv->node.dev_name, local->ddev->name);
734 cs_error(link, last_fn, last_ret);
739 prism2_release((u_long)link);
744 static void prism2_release(u_long arg)
746 struct pcmcia_device *link = (struct pcmcia_device *)arg;
748 PDEBUG(DEBUG_FLOW, "prism2_release\n");
751 struct net_device *dev = link->priv;
752 struct hostap_interface *iface;
754 iface = netdev_priv(dev);
755 prism2_hw_shutdown(dev, 0);
756 iface->local->shutdown = 1;
759 pcmcia_disable_device(link);
760 PDEBUG(DEBUG_FLOW, "release - done\n");
763 static int hostap_cs_suspend(struct pcmcia_device *link)
765 struct net_device *dev = (struct net_device *) link->priv;
767 struct hostap_interface *iface = NULL;
772 iface = netdev_priv(dev);
774 PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_SUSPEND\n", dev_info);
775 if (iface && iface->local)
776 dev_open = iface->local->num_dev_open > 0;
778 netif_stop_queue(dev);
779 netif_device_detach(dev);
786 static int hostap_cs_resume(struct pcmcia_device *link)
788 struct net_device *dev = (struct net_device *) link->priv;
790 struct hostap_interface *iface = NULL;
795 iface = netdev_priv(dev);
797 PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_PM_RESUME\n", dev_info);
799 if (iface && iface->local)
800 dev_open = iface->local->num_dev_open > 0;
802 prism2_hw_shutdown(dev, 1);
803 prism2_hw_config(dev, dev_open ? 0 : 1);
805 netif_device_attach(dev);
806 netif_start_queue(dev);
812 static struct pcmcia_device_id hostap_cs_ids[] = {
813 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
814 PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
815 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777),
816 PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000),
817 PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002),
818 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x3301),
819 PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002),
820 PCMCIA_DEVICE_MANF_CARD(0x026f, 0x030b),
821 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612),
822 PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613),
823 PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002),
824 PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002),
825 PCMCIA_DEVICE_MANF_CARD(0x02d2, 0x0001),
826 PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
827 PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
828 /* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
829 PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
830 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
831 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
832 PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
833 PCMCIA_DEVICE_MANF_CARD(0x0126, 0x0002),
834 PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0xd601, 0x0005, "ADLINK 345 CF",
836 PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "INTERSIL",
838 PCMCIA_DEVICE_MANF_CARD_PROD_ID1(0x0156, 0x0002, "Intersil",
840 PCMCIA_MFC_DEVICE_PROD_ID12(0, "SanDisk", "ConnectPlus",
841 0x7a954bd9, 0x74be00c6),
842 PCMCIA_DEVICE_PROD_ID123(
843 "Intersil", "PRISM 2_5 PCMCIA ADAPTER", "ISL37300P",
844 0x4b801a17, 0x6345a0bf, 0xc9049a39),
845 /* D-Link DWL-650 Rev. P1; manfid 0x000b, 0x7110 */
846 PCMCIA_DEVICE_PROD_ID123(
847 "D-Link", "DWL-650 Wireless PC Card RevP", "ISL37101P-10",
848 0x1a424a1c, 0x6ea57632, 0xdd97a26b),
849 PCMCIA_DEVICE_PROD_ID123(
850 "Addtron", "AWP-100 Wireless PCMCIA", "Version 01.02",
851 0xe6ec52ce, 0x08649af2, 0x4b74baa0),
852 PCMCIA_DEVICE_PROD_ID123(
853 "D", "Link DWL-650 11Mbps WLAN Card", "Version 01.02",
854 0x71b18589, 0xb6f1b0ab, 0x4b74baa0),
855 PCMCIA_DEVICE_PROD_ID123(
856 "Instant Wireless ", " Network PC CARD", "Version 01.02",
857 0x11d901af, 0x6e9bd926, 0x4b74baa0),
858 PCMCIA_DEVICE_PROD_ID123(
859 "SMC", "SMC2632W", "Version 01.02",
860 0xc4f8b18b, 0x474a1f2a, 0x4b74baa0),
861 PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G",
862 0x2decece3, 0x82067c18),
863 PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card",
864 0x54f7c49c, 0x15a75e5b),
865 PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE",
866 0x74c5e40d, 0xdb472a18),
867 PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
868 0x0733cc81, 0x0c52f395),
869 PCMCIA_DEVICE_PROD_ID12(
870 "ZoomAir 11Mbps High", "Rate wireless Networking",
871 0x273fe3db, 0x32a1eaee),
872 PCMCIA_DEVICE_PROD_ID123(
873 "Pretec", "CompactWLAN Card 802.11b", "2.5",
874 0x1cadd3e5, 0xe697636c, 0x7a5bfcf1),
875 PCMCIA_DEVICE_PROD_ID123(
876 "U.S. Robotics", "IEEE 802.11b PC-CARD", "Version 01.02",
877 0xc7b8df9d, 0x1700d087, 0x4b74baa0),
878 PCMCIA_DEVICE_PROD_ID123(
879 "Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio",
881 0x5cd01705, 0x4271660f, 0x9d08ee12),
882 PCMCIA_DEVICE_PROD_ID123(
883 "corega", "WL PCCL-11", "ISL37300P",
884 0xa21501a, 0x59868926, 0xc9049a39),
885 PCMCIA_DEVICE_PROD_ID123(
886 "The Linksys Group, Inc.", "Wireless Network CF Card", "ISL37300P",
887 0xa5f472c2, 0x9c05598d, 0xc9049a39),
888 PCMCIA_DEVICE_PROD_ID123(
889 "Wireless LAN" , "11Mbps PC Card", "Version 01.02",
890 0x4b8870ff, 0x70e946d1, 0x4b74baa0),
893 MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
896 static struct pcmcia_driver hostap_driver = {
900 .probe = hostap_cs_probe,
901 .remove = prism2_detach,
902 .owner = THIS_MODULE,
903 .id_table = hostap_cs_ids,
904 .suspend = hostap_cs_suspend,
905 .resume = hostap_cs_resume,
908 static int __init init_prism2_pccard(void)
910 return pcmcia_register_driver(&hostap_driver);
913 static void __exit exit_prism2_pccard(void)
915 pcmcia_unregister_driver(&hostap_driver);
919 module_init(init_prism2_pccard);
920 module_exit(exit_prism2_pccard);