1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
9 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
10 * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of version 2 of the GNU General Public License as
14 * published by the Free Software Foundation.
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
26 * The full GNU General Public License is included in this distribution
27 * in the file called COPYING.
29 * Contact Information:
30 * Intel Linux Wireless <linuxwifi@intel.com>
31 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
35 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
36 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
37 * Copyright(c) 2016 - 2017 Intel Deutschland GmbH
38 * All rights reserved.
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
44 * * Redistributions of source code must retain the above copyright
45 * notice, this list of conditions and the following disclaimer.
46 * * Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in
48 * the documentation and/or other materials provided with the
50 * * Neither the name Intel Corporation nor the names of its
51 * contributors may be used to endorse or promote products derived
52 * from this software without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
55 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
56 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
57 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
58 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
59 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
60 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
61 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
62 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
63 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
64 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
66 *****************************************************************************/
67 #ifndef __iwl_trans_h__
68 #define __iwl_trans_h__
70 #include <linux/ieee80211.h>
71 #include <linux/mm.h> /* for page_address */
72 #include <linux/lockdep.h>
73 #include <linux/kernel.h>
75 #include "iwl-debug.h"
76 #include "iwl-config.h"
78 #include "iwl-op-mode.h"
81 * DOC: Transport layer - what is it ?
83 * The transport layer is the layer that deals with the HW directly. It provides
84 * an abstraction of the underlying HW to the upper layer. The transport layer
85 * doesn't provide any policy, algorithm or anything of this kind, but only
86 * mechanisms to make the HW do something. It is not completely stateless but
88 * We will have an implementation for each different supported bus.
92 * DOC: Life cycle of the transport layer
94 * The transport layer has a very precise life cycle.
96 * 1) A helper function is called during the module initialization and
97 * registers the bus driver's ops with the transport's alloc function.
98 * 2) Bus's probe calls to the transport layer's allocation functions.
99 * Of course this function is bus specific.
100 * 3) This allocation functions will spawn the upper layer which will
103 * 4) At some point (i.e. mac80211's start call), the op_mode will call
104 * the following sequence:
108 * 5) Then when finished (or reset):
111 * 6) Eventually, the free function will be called.
115 * DOC: Host command section
117 * A host command is a command issued by the upper layer to the fw. There are
118 * several versions of fw that have several APIs. The transport layer is
119 * completely agnostic to these differences.
120 * The transport does provide helper functionality (i.e. SYNC / ASYNC mode),
122 #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
123 #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
124 #define SEQ_TO_INDEX(s) ((s) & 0xff)
125 #define INDEX_TO_SEQ(i) ((i) & 0xff)
126 #define SEQ_RX_FRAME cpu_to_le16(0x8000)
129 * those functions retrieve specific information from
130 * the id field in the iwl_host_cmd struct which contains
131 * the command id, the group id and the version of the command
134 static inline u8 iwl_cmd_opcode(u32 cmdid)
139 static inline u8 iwl_cmd_groupid(u32 cmdid)
141 return ((cmdid & 0xFF00) >> 8);
144 static inline u8 iwl_cmd_version(u32 cmdid)
146 return ((cmdid & 0xFF0000) >> 16);
149 static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version)
151 return opcode + (groupid << 8) + (version << 16);
154 /* make u16 wide id out of u8 group and opcode */
155 #define WIDE_ID(grp, opcode) ((grp << 8) | opcode)
156 #define DEF_ID(opcode) ((1 << 8) | (opcode))
158 /* due to the conversion, this group is special; new groups
159 * should be defined in the appropriate fw-api header files
161 #define IWL_ALWAYS_LONG_GROUP 1
164 * struct iwl_cmd_header
166 * This header format appears in the beginning of each command sent from the
167 * driver, and each response/notification received from uCode.
169 struct iwl_cmd_header {
170 u8 cmd; /* Command ID: REPLY_RXON, etc. */
173 * The driver sets up the sequence number to values of its choosing.
174 * uCode does not use this value, but passes it back to the driver
175 * when sending the response to each driver-originated command, so
176 * the driver can match the response to the command. Since the values
177 * don't get used by uCode, the driver may set up an arbitrary format.
179 * There is one exception: uCode sets bit 15 when it originates
180 * the response/notification, i.e. when the response/notification
181 * is not a direct response to a command sent by the driver. For
182 * example, uCode issues REPLY_RX when it sends a received frame
183 * to the driver; it is not a direct response to any driver command.
185 * The Linux driver uses the following format:
187 * 0:7 tfd index - position within TX queue
190 * 15 unsolicited RX or uCode-originated notification
196 * struct iwl_cmd_header_wide
198 * This header format appears in the beginning of each command sent from the
199 * driver, and each response/notification received from uCode.
200 * this is the wide version that contains more information about the command
201 * like length, version and command type
203 struct iwl_cmd_header_wide {
212 #define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */
213 #define FH_RSCSR_FRAME_INVALID 0x55550000
214 #define FH_RSCSR_FRAME_ALIGN 0x40
215 #define FH_RSCSR_RPA_EN BIT(25)
216 #define FH_RSCSR_RXQ_POS 16
217 #define FH_RSCSR_RXQ_MASK 0x3F0000
219 struct iwl_rx_packet {
221 * The first 4 bytes of the RX frame header contain both the RX frame
222 * size and some flags.
224 * 31: flag flush RB request
225 * 30: flag ignore TC (terminal counter) request
226 * 29: flag fast IRQ request
228 * 25: Offload enabled
231 * 22: Checksum enabled
234 * 13-00: RX frame size
237 struct iwl_cmd_header hdr;
241 static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
243 return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
246 static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
248 return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
252 * enum CMD_MODE - how to send the host commands ?
254 * @CMD_ASYNC: Return right away and don't wait for the response
255 * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
256 * the response. The caller needs to call iwl_free_resp when done.
257 * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
258 * command queue, but after other high priority commands. Valid only
260 * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
261 * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
262 * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
263 * (i.e. mark it as non-idle).
264 * @CMD_WANT_ASYNC_CALLBACK: the op_mode's async callback function must be
265 * called after this command completes. Valid only with CMD_ASYNC.
269 CMD_WANT_SKB = BIT(1),
270 CMD_SEND_IN_RFKILL = BIT(2),
271 CMD_HIGH_PRIO = BIT(3),
272 CMD_SEND_IN_IDLE = BIT(4),
273 CMD_MAKE_TRANS_IDLE = BIT(5),
274 CMD_WAKE_UP_TRANS = BIT(6),
275 CMD_WANT_ASYNC_CALLBACK = BIT(7),
278 #define DEF_CMD_PAYLOAD_SIZE 320
281 * struct iwl_device_cmd
283 * For allocation of the command and tx queues, this establishes the overall
284 * size of the largest command we send to uCode, except for commands that
285 * aren't fully copied and use other TFD space.
287 struct iwl_device_cmd {
290 struct iwl_cmd_header hdr; /* uCode API */
291 u8 payload[DEF_CMD_PAYLOAD_SIZE];
294 struct iwl_cmd_header_wide hdr_wide;
295 u8 payload_wide[DEF_CMD_PAYLOAD_SIZE -
296 sizeof(struct iwl_cmd_header_wide) +
297 sizeof(struct iwl_cmd_header)];
302 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
305 * number of transfer buffers (fragments) per transmit frame descriptor;
306 * this is just the driver's idea, the hardware supports 20
308 #define IWL_MAX_CMD_TBS_PER_TFD 2
311 * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
313 * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
314 * ring. The transport layer doesn't map the command's buffer to DMA, but
315 * rather copies it to a previously allocated DMA buffer. This flag tells
316 * the transport layer not to copy the command, but to map the existing
317 * buffer (that is passed in) instead. This saves the memcpy and allows
318 * commands that are bigger than the fixed buffer to be submitted.
319 * Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
320 * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
321 * chunk internally and free it again after the command completes. This
322 * can (currently) be used only once per command.
323 * Note that a TFD entry after a DUP one cannot be a normal copied one.
325 enum iwl_hcmd_dataflag {
326 IWL_HCMD_DFL_NOCOPY = BIT(0),
327 IWL_HCMD_DFL_DUP = BIT(1),
331 * struct iwl_host_cmd - Host command to the uCode
333 * @data: array of chunks that composes the data of the host command
334 * @resp_pkt: response packet, if %CMD_WANT_SKB was set
335 * @_rx_page_order: (internally used to free response packet)
336 * @_rx_page_addr: (internally used to free response packet)
337 * @flags: can be CMD_*
338 * @len: array of the lengths of the chunks in data
339 * @dataflags: IWL_HCMD_DFL_*
340 * @id: command id of the host command, for wide commands encoding the
341 * version and group as well
343 struct iwl_host_cmd {
344 const void *data[IWL_MAX_CMD_TBS_PER_TFD];
345 struct iwl_rx_packet *resp_pkt;
346 unsigned long _rx_page_addr;
351 u16 len[IWL_MAX_CMD_TBS_PER_TFD];
352 u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
355 static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
357 free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
360 struct iwl_rx_cmd_buffer {
365 unsigned int truesize;
368 static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
370 return (void *)((unsigned long)page_address(r->_page) + r->_offset);
373 static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
378 static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
380 r->_page_stolen = true;
385 static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
387 __free_pages(r->_page, r->_rx_page_order);
390 #define MAX_NO_RECLAIM_CMDS 6
392 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
395 * Maximum number of HW queues the transport layer
398 #define IWL_MAX_HW_QUEUES 32
399 #define IWL_MAX_TVQM_QUEUES 512
401 #define IWL_MAX_TID_COUNT 8
402 #define IWL_MGMT_TID 15
403 #define IWL_FRAME_LIMIT 64
404 #define IWL_MAX_RX_HW_QUEUES 16
407 * enum iwl_wowlan_status - WoWLAN image/device status
408 * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
409 * @IWL_D3_STATUS_RESET: device was reset while suspended
417 * enum iwl_trans_status: transport status flags
418 * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
419 * @STATUS_DEVICE_ENABLED: APM is enabled
420 * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
421 * @STATUS_INT_ENABLED: interrupts are enabled
422 * @STATUS_RFKILL: the HW RFkill switch is in KILL position
423 * @STATUS_FW_ERROR: the fw is in error state
424 * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
426 * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
427 * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation
429 enum iwl_trans_status {
430 STATUS_SYNC_HCMD_ACTIVE,
431 STATUS_DEVICE_ENABLED,
436 STATUS_TRANS_GOING_IDLE,
442 iwl_trans_get_rb_size_order(enum iwl_amsdu_size rb_size)
446 return get_order(4 * 1024);
448 return get_order(8 * 1024);
450 return get_order(12 * 1024);
457 struct iwl_hcmd_names {
459 const char *const cmd_name;
462 #define HCMD_NAME(x) \
463 { .cmd_id = x, .cmd_name = #x }
465 struct iwl_hcmd_arr {
466 const struct iwl_hcmd_names *arr;
470 #define HCMD_ARR(x) \
471 { .arr = x, .size = ARRAY_SIZE(x) }
474 * struct iwl_trans_config - transport configuration
476 * @op_mode: pointer to the upper layer.
477 * @cmd_queue: the index of the command queue.
478 * Must be set before start_fw.
479 * @cmd_fifo: the fifo for host commands
480 * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
481 * @no_reclaim_cmds: Some devices erroneously don't set the
482 * SEQ_RX_FRAME bit on some notifications, this is the
483 * list of such notifications to filter. Max length is
484 * %MAX_NO_RECLAIM_CMDS.
485 * @n_no_reclaim_cmds: # of commands in list
486 * @rx_buf_size: RX buffer size needed for A-MSDUs
487 * if unset 4k will be the RX buffer size
488 * @bc_table_dword: set to true if the BC table expects the byte count to be
489 * in DWORD (as opposed to bytes)
490 * @scd_set_active: should the transport configure the SCD for HCMD queue
491 * @sw_csum_tx: transport should compute the TCP checksum
492 * @command_groups: array of command groups, each member is an array of the
493 * commands in the group; for debugging only
494 * @command_groups_size: number of command groups, to avoid illegal access
495 * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
496 * we get the ALIVE from the uCode
497 * @cb_data_offs: offset inside skb->cb to store transport data at, must have
498 * space for at least two pointers
500 struct iwl_trans_config {
501 struct iwl_op_mode *op_mode;
505 unsigned int cmd_q_wdg_timeout;
506 const u8 *no_reclaim_cmds;
507 unsigned int n_no_reclaim_cmds;
509 enum iwl_amsdu_size rx_buf_size;
513 const struct iwl_hcmd_arr *command_groups;
514 int command_groups_size;
521 struct iwl_trans_dump_data {
528 struct iwl_trans_txq_scd_cfg {
536 /* Available options for &struct iwl_tx_queue_cfg_cmd */
537 enum iwl_tx_queue_cfg_actions {
538 TX_QUEUE_CFG_ENABLE_QUEUE = BIT(0),
539 TX_QUEUE_CFG_TFD_SHORT_FORMAT = BIT(1),
543 * struct iwl_tx_queue_cfg_cmd - txq hw scheduler config command
544 * @sta_id: station id
545 * @tid: tid of the queue
546 * @flags: Bit 0 - on enable, off - disable, Bit 1 - short TFD format
547 * @cb_size: size of TFD cyclic buffer. Value is exponent - 3.
548 * Minimum value 0 (8 TFDs), maximum value 5 (256 TFDs)
549 * @byte_cnt_addr: address of byte count table
550 * @tfdq_addr: address of TFD circular buffer
552 struct iwl_tx_queue_cfg_cmd {
557 __le64 byte_cnt_addr;
559 } __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_2 */
562 * struct iwl_tx_queue_cfg_rsp - response to txq hw scheduler config
563 * @queue_number: queue number assigned to this RA -TID
564 * @flags: set on failure
565 * @write_pointer: initial value for write pointer
567 struct iwl_tx_queue_cfg_rsp {
570 __le16 write_pointer;
572 } __packed; /* TX_QUEUE_CFG_RSP_API_S_VER_2 */
575 * struct iwl_trans_ops - transport specific operations
577 * All the handlers MUST be implemented
579 * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken
580 * out of a low power state. From that point on, the HW can send
581 * interrupts. May sleep.
582 * @op_mode_leave: Turn off the HW RF kill indication if on
584 * @start_fw: allocates and inits all the resources for the transport
585 * layer. Also kick a fw image.
587 * @fw_alive: called when the fw sends alive notification. If the fw provides
588 * the SCD base address in SRAM, then provide it here, or 0 otherwise.
590 * @stop_device: stops the whole device (embedded CPU put to reset) and stops
591 * the HW. If low_power is true, the NIC will be put in low power state.
592 * From that point on, the HW will be stopped but will still issue an
593 * interrupt if the HW RF kill switch is triggered.
594 * This callback must do the right thing and not crash even if %start_hw()
595 * was called but not &start_fw(). May sleep.
596 * @d3_suspend: put the device into the correct mode for WoWLAN during
597 * suspend. This is optional, if not implemented WoWLAN will not be
598 * supported. This callback may sleep.
599 * @d3_resume: resume the device after WoWLAN, enabling the opmode to
600 * talk to the WoWLAN image to get its status. This is optional, if not
601 * implemented WoWLAN will not be supported. This callback may sleep.
602 * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
603 * If RFkill is asserted in the middle of a SYNC host command, it must
604 * return -ERFKILL straight away.
605 * May sleep only if CMD_ASYNC is not set
606 * @tx: send an skb. The transport relies on the op_mode to zero the
607 * the ieee80211_tx_info->driver_data. If the MPDU is an A-MSDU, all
608 * the CSUM will be taken care of (TCP CSUM and IP header in case of
609 * IPv4). If the MPDU is a single MSDU, the op_mode must compute the IP
610 * header if it is IPv4.
612 * @reclaim: free packet until ssn. Returns a list of freed packets.
614 * @txq_enable: setup a queue. To setup an AC queue, use the
615 * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
616 * this one. The op_mode must not configure the HCMD queue. The scheduler
617 * configuration may be %NULL, in which case the hardware will not be
618 * configured. May sleep.
619 * @txq_disable: de-configure a Tx queue to send AMPDUs
621 * @txq_set_shared_mode: change Tx queue shared/unshared marking
622 * @wait_tx_queue_empty: wait until tx queues are empty. May sleep.
623 * @freeze_txq_timer: prevents the timer of the queue from firing until the
624 * queue is set to awake. Must be atomic.
625 * @block_txq_ptrs: stop updating the write pointers of the Tx queues. Note
626 * that the transport needs to refcount the calls since this function
627 * will be called several times with block = true, and then the queues
628 * need to be unblocked only after the same number of calls with
630 * @write8: write a u8 to a register at offset ofs from the BAR
631 * @write32: write a u32 to a register at offset ofs from the BAR
632 * @read32: read a u32 register at offset ofs from the BAR
633 * @read_prph: read a DWORD from a periphery register
634 * @write_prph: write a DWORD to a periphery register
635 * @read_mem: read device's SRAM in DWORD
636 * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
638 * @configure: configure parameters required by the transport layer from
639 * the op_mode. May be called several times before start_fw, can't be
641 * @set_pmi: set the power pmi state
642 * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
643 * Sleeping is not allowed between grab_nic_access and
644 * release_nic_access.
645 * @release_nic_access: let the NIC go to sleep. The "flags" parameter
646 * must be the same one that was sent before to the grab_nic_access.
647 * @set_bits_mask - set SRAM register according to value and mask.
648 * @ref: grab a reference to the transport/FW layers, disallowing
649 * certain low power states
650 * @unref: release a reference previously taken with @ref. Note that
651 * initially the reference count is 1, making an initial @unref
652 * necessary to allow low power states.
653 * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
654 * TX'ed commands and similar. The buffer will be vfree'd by the caller.
655 * Note that the transport must fill in the proper file headers.
657 struct iwl_trans_ops {
659 int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power);
660 void (*op_mode_leave)(struct iwl_trans *iwl_trans);
661 int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
663 int (*update_sf)(struct iwl_trans *trans,
664 struct iwl_sf_region *st_fwrd_space);
665 void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
666 void (*stop_device)(struct iwl_trans *trans, bool low_power);
668 void (*d3_suspend)(struct iwl_trans *trans, bool test, bool reset);
669 int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
670 bool test, bool reset);
672 int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
674 int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
675 struct iwl_device_cmd *dev_cmd, int queue);
676 void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
677 struct sk_buff_head *skbs);
679 void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
680 const struct iwl_trans_txq_scd_cfg *cfg,
681 unsigned int queue_wdg_timeout);
682 void (*txq_disable)(struct iwl_trans *trans, int queue,
685 int (*txq_alloc)(struct iwl_trans *trans,
686 struct iwl_tx_queue_cfg_cmd *cmd,
688 unsigned int queue_wdg_timeout);
689 void (*txq_free)(struct iwl_trans *trans, int queue);
691 void (*txq_set_shared_mode)(struct iwl_trans *trans, u32 txq_id,
694 int (*wait_tx_queues_empty)(struct iwl_trans *trans, u32 txq_bm);
695 void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
697 void (*block_txq_ptrs)(struct iwl_trans *trans, bool block);
699 void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
700 void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
701 u32 (*read32)(struct iwl_trans *trans, u32 ofs);
702 u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
703 void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
704 int (*read_mem)(struct iwl_trans *trans, u32 addr,
705 void *buf, int dwords);
706 int (*write_mem)(struct iwl_trans *trans, u32 addr,
707 const void *buf, int dwords);
708 void (*configure)(struct iwl_trans *trans,
709 const struct iwl_trans_config *trans_cfg);
710 void (*set_pmi)(struct iwl_trans *trans, bool state);
711 bool (*grab_nic_access)(struct iwl_trans *trans, unsigned long *flags);
712 void (*release_nic_access)(struct iwl_trans *trans,
713 unsigned long *flags);
714 void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
716 void (*ref)(struct iwl_trans *trans);
717 void (*unref)(struct iwl_trans *trans);
718 int (*suspend)(struct iwl_trans *trans);
719 void (*resume)(struct iwl_trans *trans);
721 struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans,
722 const struct iwl_fw_dbg_trigger_tlv
727 * enum iwl_trans_state - state of the transport layer
729 * @IWL_TRANS_NO_FW: no fw has sent an alive response
730 * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
732 enum iwl_trans_state {
734 IWL_TRANS_FW_ALIVE = 1,
738 * DOC: Platform power management
740 * There are two types of platform power management: system-wide
741 * (WoWLAN) and runtime.
743 * In system-wide power management the entire platform goes into a low
744 * power state (e.g. idle or suspend to RAM) at the same time and the
745 * device is configured as a wakeup source for the entire platform.
746 * This is usually triggered by userspace activity (e.g. the user
747 * presses the suspend button or a power management daemon decides to
748 * put the platform in low power mode). The device's behavior in this
749 * mode is dictated by the wake-on-WLAN configuration.
751 * In runtime power management, only the devices which are themselves
752 * idle enter a low power state. This is done at runtime, which means
753 * that the entire system is still running normally. This mode is
754 * usually triggered automatically by the device driver and requires
755 * the ability to enter and exit the low power modes in a very short
756 * time, so there is not much impact in usability.
758 * The terms used for the device's behavior are as follows:
760 * - D0: the device is fully powered and the host is awake;
761 * - D3: the device is in low power mode and only reacts to
762 * specific events (e.g. magic-packet received or scan
764 * - D0I3: the device is in low power mode and reacts to any
765 * activity (e.g. RX);
767 * These terms reflect the power modes in the firmware and are not to
768 * be confused with the physical device power state. The NIC can be
769 * in D0I3 mode even if, for instance, the PCI device is in D3 state.
773 * enum iwl_plat_pm_mode - platform power management mode
775 * This enumeration describes the device's platform power management
776 * behavior when in idle mode (i.e. runtime power management) or when
777 * in system-wide suspend (i.e WoWLAN).
779 * @IWL_PLAT_PM_MODE_DISABLED: power management is disabled for this
780 * device. At runtime, this means that nothing happens and the
781 * device always remains in active. In system-wide suspend mode,
782 * it means that the all connections will be closed automatically
783 * by mac80211 before the platform is suspended.
784 * @IWL_PLAT_PM_MODE_D3: the device goes into D3 mode (i.e. WoWLAN).
785 * For runtime power management, this mode is not officially
787 * @IWL_PLAT_PM_MODE_D0I3: the device goes into D0I3 mode.
789 enum iwl_plat_pm_mode {
790 IWL_PLAT_PM_MODE_DISABLED,
792 IWL_PLAT_PM_MODE_D0I3,
795 /* Max time to wait for trans to become idle/non-idle on d0i3
796 * enter/exit (in msecs).
798 #define IWL_TRANS_IDLE_TIMEOUT 2000
801 * struct iwl_trans - transport common data
803 * @ops - pointer to iwl_trans_ops
804 * @op_mode - pointer to the op_mode
805 * @cfg - pointer to the configuration
806 * @drv - pointer to iwl_drv
807 * @status: a bit-mask of transport status flags
808 * @dev - pointer to struct device * that represents the device
809 * @max_skb_frags: maximum number of fragments an SKB can have when transmitted.
810 * 0 indicates that frag SKBs (NETIF_F_SG) aren't supported.
811 * @hw_rf_id a u32 with the device RF ID
812 * @hw_id: a u32 with the ID of the device / sub-device.
813 * Set during transport allocation.
814 * @hw_id_str: a string with info about HW ID. Set during transport allocation.
815 * @pm_support: set to true in start_hw if link pm is supported
816 * @ltr_enabled: set to true if the LTR is enabled
817 * @wide_cmd_header: true when ucode supports wide command header format
818 * @num_rx_queues: number of RX queues allocated by the transport;
819 * the transport must set this before calling iwl_drv_start()
820 * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
821 * The user should use iwl_trans_{alloc,free}_tx_cmd.
822 * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
823 * starting the firmware, used for tracing
824 * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
825 * start of the 802.11 header in the @rx_mpdu_cmd
826 * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
827 * @dbg_dest_tlv: points to the destination TLV for debug
828 * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
829 * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
830 * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
831 * @paging_req_addr: The location were the FW will upload / download the pages
832 * from. The address is set by the opmode
833 * @paging_db: Pointer to the opmode paging data base, the pointer is set by
835 * @paging_download_buf: Buffer used for copying all of the pages before
836 * downloading them to the FW. The buffer is allocated in the opmode
837 * @system_pm_mode: the system-wide power management mode in use.
838 * This mode is set dynamically, depending on the WoWLAN values
839 * configured from the userspace at runtime.
840 * @runtime_pm_mode: the runtime power management mode in use. This
841 * mode is set during the initialization phase and is not
842 * supposed to change during runtime.
845 const struct iwl_trans_ops *ops;
846 struct iwl_op_mode *op_mode;
847 const struct iwl_cfg *cfg;
849 enum iwl_trans_state state;
850 unsigned long status;
859 u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
864 const struct iwl_hcmd_arr *command_groups;
865 int command_groups_size;
866 bool wide_cmd_header;
870 /* The following fields are internal only */
871 struct kmem_cache *dev_cmd_pool;
872 char dev_cmd_pool_name[50];
874 struct dentry *dbgfs_dir;
876 #ifdef CONFIG_LOCKDEP
877 struct lockdep_map sync_cmd_lockdep_map;
882 const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
883 const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
884 struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
888 * Paging parameters - All of the parameters should be set by the
889 * opmode when paging is enabled
892 struct iwl_fw_paging *paging_db;
893 void *paging_download_buf;
895 enum iwl_plat_pm_mode system_pm_mode;
896 enum iwl_plat_pm_mode runtime_pm_mode;
899 /* pointer to trans specific struct */
900 /*Ensure that this pointer will always be aligned to sizeof pointer */
901 char trans_specific[0] __aligned(sizeof(void *));
904 const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id);
905 int iwl_cmd_groups_verify_sorted(const struct iwl_trans_config *trans);
907 static inline void iwl_trans_configure(struct iwl_trans *trans,
908 const struct iwl_trans_config *trans_cfg)
910 trans->op_mode = trans_cfg->op_mode;
912 trans->ops->configure(trans, trans_cfg);
913 WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg));
916 static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power)
920 return trans->ops->start_hw(trans, low_power);
923 static inline int iwl_trans_start_hw(struct iwl_trans *trans)
925 return trans->ops->start_hw(trans, true);
928 static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
932 if (trans->ops->op_mode_leave)
933 trans->ops->op_mode_leave(trans);
935 trans->op_mode = NULL;
937 trans->state = IWL_TRANS_NO_FW;
940 static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
944 trans->state = IWL_TRANS_FW_ALIVE;
946 trans->ops->fw_alive(trans, scd_addr);
949 static inline int iwl_trans_start_fw(struct iwl_trans *trans,
950 const struct fw_img *fw,
955 WARN_ON_ONCE(!trans->rx_mpdu_cmd);
957 clear_bit(STATUS_FW_ERROR, &trans->status);
958 return trans->ops->start_fw(trans, fw, run_in_rfkill);
961 static inline int iwl_trans_update_sf(struct iwl_trans *trans,
962 struct iwl_sf_region *st_fwrd_space)
966 if (trans->ops->update_sf)
967 return trans->ops->update_sf(trans, st_fwrd_space);
972 static inline void _iwl_trans_stop_device(struct iwl_trans *trans,
977 trans->ops->stop_device(trans, low_power);
979 trans->state = IWL_TRANS_NO_FW;
982 static inline void iwl_trans_stop_device(struct iwl_trans *trans)
984 _iwl_trans_stop_device(trans, true);
987 static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test,
991 if (trans->ops->d3_suspend)
992 trans->ops->d3_suspend(trans, test, reset);
995 static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
996 enum iwl_d3_status *status,
997 bool test, bool reset)
1000 if (!trans->ops->d3_resume)
1003 return trans->ops->d3_resume(trans, status, test, reset);
1006 static inline void iwl_trans_ref(struct iwl_trans *trans)
1008 if (trans->ops->ref)
1009 trans->ops->ref(trans);
1012 static inline void iwl_trans_unref(struct iwl_trans *trans)
1014 if (trans->ops->unref)
1015 trans->ops->unref(trans);
1018 static inline int iwl_trans_suspend(struct iwl_trans *trans)
1020 if (!trans->ops->suspend)
1023 return trans->ops->suspend(trans);
1026 static inline void iwl_trans_resume(struct iwl_trans *trans)
1028 if (trans->ops->resume)
1029 trans->ops->resume(trans);
1032 static inline struct iwl_trans_dump_data *
1033 iwl_trans_dump_data(struct iwl_trans *trans,
1034 const struct iwl_fw_dbg_trigger_tlv *trigger)
1036 if (!trans->ops->dump_data)
1038 return trans->ops->dump_data(trans, trigger);
1041 static inline struct iwl_device_cmd *
1042 iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
1044 struct iwl_device_cmd *dev_cmd_ptr =
1045 kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
1047 if (unlikely(dev_cmd_ptr == NULL))
1053 int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
1055 static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
1056 struct iwl_device_cmd *dev_cmd)
1058 kmem_cache_free(trans->dev_cmd_pool, dev_cmd);
1061 static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
1062 struct iwl_device_cmd *dev_cmd, int queue)
1064 if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
1067 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1068 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1072 return trans->ops->tx(trans, skb, dev_cmd, queue);
1075 static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
1076 int ssn, struct sk_buff_head *skbs)
1078 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1079 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1083 trans->ops->reclaim(trans, queue, ssn, skbs);
1086 static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
1089 trans->ops->txq_disable(trans, queue, configure_scd);
1093 iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
1094 const struct iwl_trans_txq_scd_cfg *cfg,
1095 unsigned int queue_wdg_timeout)
1099 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1100 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1104 trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout);
1108 iwl_trans_txq_free(struct iwl_trans *trans, int queue)
1110 if (WARN_ON_ONCE(!trans->ops->txq_free))
1113 trans->ops->txq_free(trans, queue);
1117 iwl_trans_txq_alloc(struct iwl_trans *trans,
1118 struct iwl_tx_queue_cfg_cmd *cmd,
1120 unsigned int queue_wdg_timeout)
1124 if (WARN_ON_ONCE(!trans->ops->txq_alloc))
1127 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1128 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1132 return trans->ops->txq_alloc(trans, cmd, cmd_id, queue_wdg_timeout);
1135 static inline void iwl_trans_txq_set_shared_mode(struct iwl_trans *trans,
1136 int queue, bool shared_mode)
1138 if (trans->ops->txq_set_shared_mode)
1139 trans->ops->txq_set_shared_mode(trans, queue, shared_mode);
1142 static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
1143 int fifo, int sta_id, int tid,
1144 int frame_limit, u16 ssn,
1145 unsigned int queue_wdg_timeout)
1147 struct iwl_trans_txq_scd_cfg cfg = {
1151 .frame_limit = frame_limit,
1152 .aggregate = sta_id >= 0,
1155 iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
1159 void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
1160 unsigned int queue_wdg_timeout)
1162 struct iwl_trans_txq_scd_cfg cfg = {
1165 .tid = IWL_MAX_TID_COUNT,
1166 .frame_limit = IWL_FRAME_LIMIT,
1170 iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
1173 static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
1177 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1178 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1182 if (trans->ops->freeze_txq_timer)
1183 trans->ops->freeze_txq_timer(trans, txqs, freeze);
1186 static inline void iwl_trans_block_txq_ptrs(struct iwl_trans *trans,
1189 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1190 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1194 if (trans->ops->block_txq_ptrs)
1195 trans->ops->block_txq_ptrs(trans, block);
1198 static inline int iwl_trans_wait_tx_queues_empty(struct iwl_trans *trans,
1201 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1202 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1206 return trans->ops->wait_tx_queues_empty(trans, txqs);
1209 static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
1211 trans->ops->write8(trans, ofs, val);
1214 static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
1216 trans->ops->write32(trans, ofs, val);
1219 static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
1221 return trans->ops->read32(trans, ofs);
1224 static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
1226 return trans->ops->read_prph(trans, ofs);
1229 static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
1232 return trans->ops->write_prph(trans, ofs, val);
1235 static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
1236 void *buf, int dwords)
1238 return trans->ops->read_mem(trans, addr, buf, dwords);
1241 #define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \
1243 if (__builtin_constant_p(bufsize)) \
1244 BUILD_BUG_ON((bufsize) % sizeof(u32)); \
1245 iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
1248 static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
1252 if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
1258 static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
1259 const void *buf, int dwords)
1261 return trans->ops->write_mem(trans, addr, buf, dwords);
1264 static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
1267 return iwl_trans_write_mem(trans, addr, &val, 1);
1270 static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
1272 if (trans->ops->set_pmi)
1273 trans->ops->set_pmi(trans, state);
1277 iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
1279 trans->ops->set_bits_mask(trans, reg, mask, value);
1282 #define iwl_trans_grab_nic_access(trans, flags) \
1283 __cond_lock(nic_access, \
1284 likely((trans)->ops->grab_nic_access(trans, flags)))
1286 static inline void __releases(nic_access)
1287 iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
1289 trans->ops->release_nic_access(trans, flags);
1290 __release(nic_access);
1293 static inline void iwl_trans_fw_error(struct iwl_trans *trans)
1295 if (WARN_ON_ONCE(!trans->op_mode))
1298 /* prevent double restarts due to the same erroneous FW */
1299 if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
1300 iwl_op_mode_nic_error(trans->op_mode);
1303 /*****************************************************
1304 * transport helper functions
1305 *****************************************************/
1306 struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
1308 const struct iwl_cfg *cfg,
1309 const struct iwl_trans_ops *ops);
1310 void iwl_trans_free(struct iwl_trans *trans);
1312 /*****************************************************
1313 * driver (transport) register/unregister functions
1314 ******************************************************/
1315 int __must_check iwl_pci_register_driver(void);
1316 void iwl_pci_unregister_driver(void);
1318 #endif /* __iwl_trans_h__ */