1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
9 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
10 * Copyright(c) 2016 Intel Deutschland GmbH
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of version 2 of the GNU General Public License as
14 * published by the Free Software Foundation.
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
26 * The full GNU General Public License is included in this distribution
27 * in the file called COPYING.
29 * Contact Information:
30 * Intel Linux Wireless <linuxwifi@intel.com>
31 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
35 * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
36 * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
37 * Copyright(c) 2016 Intel Deutschland GmbH
38 * All rights reserved.
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
44 * * Redistributions of source code must retain the above copyright
45 * notice, this list of conditions and the following disclaimer.
46 * * Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in
48 * the documentation and/or other materials provided with the
50 * * Neither the name Intel Corporation nor the names of its
51 * contributors may be used to endorse or promote products derived
52 * from this software without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
55 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
56 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
57 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
58 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
59 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
60 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
61 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
62 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
63 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
64 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
66 *****************************************************************************/
67 #ifndef __iwl_trans_h__
68 #define __iwl_trans_h__
70 #include <linux/ieee80211.h>
71 #include <linux/mm.h> /* for page_address */
72 #include <linux/lockdep.h>
73 #include <linux/kernel.h>
75 #include "iwl-debug.h"
76 #include "iwl-config.h"
78 #include "iwl-op-mode.h"
81 * DOC: Transport layer - what is it ?
83 * The transport layer is the layer that deals with the HW directly. It provides
84 * an abstraction of the underlying HW to the upper layer. The transport layer
85 * doesn't provide any policy, algorithm or anything of this kind, but only
86 * mechanisms to make the HW do something. It is not completely stateless but
88 * We will have an implementation for each different supported bus.
92 * DOC: Life cycle of the transport layer
94 * The transport layer has a very precise life cycle.
96 * 1) A helper function is called during the module initialization and
97 * registers the bus driver's ops with the transport's alloc function.
98 * 2) Bus's probe calls to the transport layer's allocation functions.
99 * Of course this function is bus specific.
100 * 3) This allocation functions will spawn the upper layer which will
103 * 4) At some point (i.e. mac80211's start call), the op_mode will call
104 * the following sequence:
108 * 5) Then when finished (or reset):
111 * 6) Eventually, the free function will be called.
115 * DOC: Host command section
117 * A host command is a command issued by the upper layer to the fw. There are
118 * several versions of fw that have several APIs. The transport layer is
119 * completely agnostic to these differences.
120 * The transport does provide helper functionality (i.e. SYNC / ASYNC mode),
122 #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
123 #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
124 #define SEQ_TO_INDEX(s) ((s) & 0xff)
125 #define INDEX_TO_SEQ(i) ((i) & 0xff)
126 #define SEQ_RX_FRAME cpu_to_le16(0x8000)
129 * those functions retrieve specific information from
130 * the id field in the iwl_host_cmd struct which contains
131 * the command id, the group id and the version of the command
134 static inline u8 iwl_cmd_opcode(u32 cmdid)
139 static inline u8 iwl_cmd_groupid(u32 cmdid)
141 return ((cmdid & 0xFF00) >> 8);
144 static inline u8 iwl_cmd_version(u32 cmdid)
146 return ((cmdid & 0xFF0000) >> 16);
149 static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version)
151 return opcode + (groupid << 8) + (version << 16);
154 /* make u16 wide id out of u8 group and opcode */
155 #define WIDE_ID(grp, opcode) ((grp << 8) | opcode)
157 /* due to the conversion, this group is special; new groups
158 * should be defined in the appropriate fw-api header files
160 #define IWL_ALWAYS_LONG_GROUP 1
163 * struct iwl_cmd_header
165 * This header format appears in the beginning of each command sent from the
166 * driver, and each response/notification received from uCode.
168 struct iwl_cmd_header {
169 u8 cmd; /* Command ID: REPLY_RXON, etc. */
172 * The driver sets up the sequence number to values of its choosing.
173 * uCode does not use this value, but passes it back to the driver
174 * when sending the response to each driver-originated command, so
175 * the driver can match the response to the command. Since the values
176 * don't get used by uCode, the driver may set up an arbitrary format.
178 * There is one exception: uCode sets bit 15 when it originates
179 * the response/notification, i.e. when the response/notification
180 * is not a direct response to a command sent by the driver. For
181 * example, uCode issues REPLY_RX when it sends a received frame
182 * to the driver; it is not a direct response to any driver command.
184 * The Linux driver uses the following format:
186 * 0:7 tfd index - position within TX queue
189 * 15 unsolicited RX or uCode-originated notification
195 * struct iwl_cmd_header_wide
197 * This header format appears in the beginning of each command sent from the
198 * driver, and each response/notification received from uCode.
199 * this is the wide version that contains more information about the command
200 * like length, version and command type
202 struct iwl_cmd_header_wide {
211 #define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */
212 #define FH_RSCSR_FRAME_INVALID 0x55550000
213 #define FH_RSCSR_FRAME_ALIGN 0x40
214 #define FH_RSCSR_RPA_EN BIT(25)
215 #define FH_RSCSR_RXQ_POS 16
216 #define FH_RSCSR_RXQ_MASK 0x3F0000
218 struct iwl_rx_packet {
220 * The first 4 bytes of the RX frame header contain both the RX frame
221 * size and some flags.
223 * 31: flag flush RB request
224 * 30: flag ignore TC (terminal counter) request
225 * 29: flag fast IRQ request
227 * 25: Offload enabled
230 * 22: Checksum enabled
233 * 13-00: RX frame size
236 struct iwl_cmd_header hdr;
240 static inline u32 iwl_rx_packet_len(const struct iwl_rx_packet *pkt)
242 return le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
245 static inline u32 iwl_rx_packet_payload_len(const struct iwl_rx_packet *pkt)
247 return iwl_rx_packet_len(pkt) - sizeof(pkt->hdr);
251 * enum CMD_MODE - how to send the host commands ?
253 * @CMD_ASYNC: Return right away and don't wait for the response
254 * @CMD_WANT_SKB: Not valid with CMD_ASYNC. The caller needs the buffer of
255 * the response. The caller needs to call iwl_free_resp when done.
256 * @CMD_HIGH_PRIO: The command is high priority - it goes to the front of the
257 * command queue, but after other high priority commands. Valid only
259 * @CMD_SEND_IN_IDLE: The command should be sent even when the trans is idle.
260 * @CMD_MAKE_TRANS_IDLE: The command response should mark the trans as idle.
261 * @CMD_WAKE_UP_TRANS: The command response should wake up the trans
262 * (i.e. mark it as non-idle).
263 * @CMD_WANT_ASYNC_CALLBACK: the op_mode's async callback function must be
264 * called after this command completes. Valid only with CMD_ASYNC.
265 * @CMD_TB_BITMAP_POS: Position of the first bit for the TB bitmap. We need to
266 * check that we leave enough room for the TBs bitmap which needs 20 bits.
270 CMD_WANT_SKB = BIT(1),
271 CMD_SEND_IN_RFKILL = BIT(2),
272 CMD_HIGH_PRIO = BIT(3),
273 CMD_SEND_IN_IDLE = BIT(4),
274 CMD_MAKE_TRANS_IDLE = BIT(5),
275 CMD_WAKE_UP_TRANS = BIT(6),
276 CMD_WANT_ASYNC_CALLBACK = BIT(7),
278 CMD_TB_BITMAP_POS = 11,
281 #define DEF_CMD_PAYLOAD_SIZE 320
284 * struct iwl_device_cmd
286 * For allocation of the command and tx queues, this establishes the overall
287 * size of the largest command we send to uCode, except for commands that
288 * aren't fully copied and use other TFD space.
290 struct iwl_device_cmd {
293 struct iwl_cmd_header hdr; /* uCode API */
294 u8 payload[DEF_CMD_PAYLOAD_SIZE];
297 struct iwl_cmd_header_wide hdr_wide;
298 u8 payload_wide[DEF_CMD_PAYLOAD_SIZE -
299 sizeof(struct iwl_cmd_header_wide) +
300 sizeof(struct iwl_cmd_header)];
305 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
308 * number of transfer buffers (fragments) per transmit frame descriptor;
309 * this is just the driver's idea, the hardware supports 20
311 #define IWL_MAX_CMD_TBS_PER_TFD 2
314 * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
316 * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
317 * ring. The transport layer doesn't map the command's buffer to DMA, but
318 * rather copies it to a previously allocated DMA buffer. This flag tells
319 * the transport layer not to copy the command, but to map the existing
320 * buffer (that is passed in) instead. This saves the memcpy and allows
321 * commands that are bigger than the fixed buffer to be submitted.
322 * Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
323 * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
324 * chunk internally and free it again after the command completes. This
325 * can (currently) be used only once per command.
326 * Note that a TFD entry after a DUP one cannot be a normal copied one.
328 enum iwl_hcmd_dataflag {
329 IWL_HCMD_DFL_NOCOPY = BIT(0),
330 IWL_HCMD_DFL_DUP = BIT(1),
334 * struct iwl_host_cmd - Host command to the uCode
336 * @data: array of chunks that composes the data of the host command
337 * @resp_pkt: response packet, if %CMD_WANT_SKB was set
338 * @_rx_page_order: (internally used to free response packet)
339 * @_rx_page_addr: (internally used to free response packet)
340 * @flags: can be CMD_*
341 * @len: array of the lengths of the chunks in data
342 * @dataflags: IWL_HCMD_DFL_*
343 * @id: command id of the host command, for wide commands encoding the
344 * version and group as well
346 struct iwl_host_cmd {
347 const void *data[IWL_MAX_CMD_TBS_PER_TFD];
348 struct iwl_rx_packet *resp_pkt;
349 unsigned long _rx_page_addr;
354 u16 len[IWL_MAX_CMD_TBS_PER_TFD];
355 u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
358 static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
360 free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
363 struct iwl_rx_cmd_buffer {
368 unsigned int truesize;
371 static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
373 return (void *)((unsigned long)page_address(r->_page) + r->_offset);
376 static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
381 static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
383 r->_page_stolen = true;
388 static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
390 __free_pages(r->_page, r->_rx_page_order);
393 #define MAX_NO_RECLAIM_CMDS 6
396 * The first entry in driver_data array in ieee80211_tx_info
397 * that can be used by the transport.
399 #define IWL_TRANS_FIRST_DRIVER_DATA 2
400 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
403 * Maximum number of HW queues the transport layer
406 #define IWL_MAX_HW_QUEUES 32
407 #define IWL_MAX_TID_COUNT 8
408 #define IWL_FRAME_LIMIT 64
409 #define IWL_MAX_RX_HW_QUEUES 16
412 * enum iwl_wowlan_status - WoWLAN image/device status
413 * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
414 * @IWL_D3_STATUS_RESET: device was reset while suspended
422 * enum iwl_trans_status: transport status flags
423 * @STATUS_SYNC_HCMD_ACTIVE: a SYNC command is being processed
424 * @STATUS_DEVICE_ENABLED: APM is enabled
425 * @STATUS_TPOWER_PMI: the device might be asleep (need to wake it up)
426 * @STATUS_INT_ENABLED: interrupts are enabled
427 * @STATUS_RFKILL: the HW RFkill switch is in KILL position
428 * @STATUS_FW_ERROR: the fw is in error state
429 * @STATUS_TRANS_GOING_IDLE: shutting down the trans, only special commands
431 * @STATUS_TRANS_IDLE: the trans is idle - general commands are not to be sent
432 * @STATUS_TRANS_DEAD: trans is dead - avoid any read/write operation
434 enum iwl_trans_status {
435 STATUS_SYNC_HCMD_ACTIVE,
436 STATUS_DEVICE_ENABLED,
441 STATUS_TRANS_GOING_IDLE,
447 iwl_trans_get_rb_size_order(enum iwl_amsdu_size rb_size)
451 return get_order(4 * 1024);
453 return get_order(8 * 1024);
455 return get_order(12 * 1024);
462 struct iwl_hcmd_names {
464 const char *const cmd_name;
467 #define HCMD_NAME(x) \
468 { .cmd_id = x, .cmd_name = #x }
470 struct iwl_hcmd_arr {
471 const struct iwl_hcmd_names *arr;
475 #define HCMD_ARR(x) \
476 { .arr = x, .size = ARRAY_SIZE(x) }
479 * struct iwl_trans_config - transport configuration
481 * @op_mode: pointer to the upper layer.
482 * @cmd_queue: the index of the command queue.
483 * Must be set before start_fw.
484 * @cmd_fifo: the fifo for host commands
485 * @cmd_q_wdg_timeout: the timeout of the watchdog timer for the command queue.
486 * @no_reclaim_cmds: Some devices erroneously don't set the
487 * SEQ_RX_FRAME bit on some notifications, this is the
488 * list of such notifications to filter. Max length is
489 * %MAX_NO_RECLAIM_CMDS.
490 * @n_no_reclaim_cmds: # of commands in list
491 * @rx_buf_size: RX buffer size needed for A-MSDUs
492 * if unset 4k will be the RX buffer size
493 * @bc_table_dword: set to true if the BC table expects the byte count to be
494 * in DWORD (as opposed to bytes)
495 * @scd_set_active: should the transport configure the SCD for HCMD queue
496 * @wide_cmd_header: firmware supports wide host command header
497 * @sw_csum_tx: transport should compute the TCP checksum
498 * @command_groups: array of command groups, each member is an array of the
499 * commands in the group; for debugging only
500 * @command_groups_size: number of command groups, to avoid illegal access
501 * @sdio_adma_addr: the default address to set for the ADMA in SDIO mode until
502 * we get the ALIVE from the uCode
504 struct iwl_trans_config {
505 struct iwl_op_mode *op_mode;
509 unsigned int cmd_q_wdg_timeout;
510 const u8 *no_reclaim_cmds;
511 unsigned int n_no_reclaim_cmds;
513 enum iwl_amsdu_size rx_buf_size;
516 bool wide_cmd_header;
518 const struct iwl_hcmd_arr *command_groups;
519 int command_groups_size;
524 struct iwl_trans_dump_data {
531 struct iwl_trans_txq_scd_cfg {
540 * struct iwl_trans_ops - transport specific operations
542 * All the handlers MUST be implemented
544 * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken
545 * out of a low power state. From that point on, the HW can send
546 * interrupts. May sleep.
547 * @op_mode_leave: Turn off the HW RF kill indication if on
549 * @start_fw: allocates and inits all the resources for the transport
550 * layer. Also kick a fw image.
552 * @fw_alive: called when the fw sends alive notification. If the fw provides
553 * the SCD base address in SRAM, then provide it here, or 0 otherwise.
555 * @stop_device: stops the whole device (embedded CPU put to reset) and stops
556 * the HW. If low_power is true, the NIC will be put in low power state.
557 * From that point on, the HW will be stopped but will still issue an
558 * interrupt if the HW RF kill switch is triggered.
559 * This callback must do the right thing and not crash even if %start_hw()
560 * was called but not &start_fw(). May sleep.
561 * @d3_suspend: put the device into the correct mode for WoWLAN during
562 * suspend. This is optional, if not implemented WoWLAN will not be
563 * supported. This callback may sleep.
564 * @d3_resume: resume the device after WoWLAN, enabling the opmode to
565 * talk to the WoWLAN image to get its status. This is optional, if not
566 * implemented WoWLAN will not be supported. This callback may sleep.
567 * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
568 * If RFkill is asserted in the middle of a SYNC host command, it must
569 * return -ERFKILL straight away.
570 * May sleep only if CMD_ASYNC is not set
571 * @tx: send an skb. The transport relies on the op_mode to zero the
572 * the ieee80211_tx_info->driver_data. If the MPDU is an A-MSDU, all
573 * the CSUM will be taken care of (TCP CSUM and IP header in case of
574 * IPv4). If the MPDU is a single MSDU, the op_mode must compute the IP
575 * header if it is IPv4.
577 * @reclaim: free packet until ssn. Returns a list of freed packets.
579 * @txq_enable: setup a queue. To setup an AC queue, use the
580 * iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
581 * this one. The op_mode must not configure the HCMD queue. The scheduler
582 * configuration may be %NULL, in which case the hardware will not be
583 * configured. May sleep.
584 * @txq_disable: de-configure a Tx queue to send AMPDUs
586 * @wait_tx_queue_empty: wait until tx queues are empty. May sleep.
587 * @freeze_txq_timer: prevents the timer of the queue from firing until the
588 * queue is set to awake. Must be atomic.
589 * @block_txq_ptrs: stop updating the write pointers of the Tx queues. Note
590 * that the transport needs to refcount the calls since this function
591 * will be called several times with block = true, and then the queues
592 * need to be unblocked only after the same number of calls with
594 * @write8: write a u8 to a register at offset ofs from the BAR
595 * @write32: write a u32 to a register at offset ofs from the BAR
596 * @read32: read a u32 register at offset ofs from the BAR
597 * @read_prph: read a DWORD from a periphery register
598 * @write_prph: write a DWORD to a periphery register
599 * @read_mem: read device's SRAM in DWORD
600 * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
602 * @configure: configure parameters required by the transport layer from
603 * the op_mode. May be called several times before start_fw, can't be
605 * @set_pmi: set the power pmi state
606 * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
607 * Sleeping is not allowed between grab_nic_access and
608 * release_nic_access.
609 * @release_nic_access: let the NIC go to sleep. The "flags" parameter
610 * must be the same one that was sent before to the grab_nic_access.
611 * @set_bits_mask - set SRAM register according to value and mask.
612 * @ref: grab a reference to the transport/FW layers, disallowing
613 * certain low power states
614 * @unref: release a reference previously taken with @ref. Note that
615 * initially the reference count is 1, making an initial @unref
616 * necessary to allow low power states.
617 * @dump_data: return a vmalloc'ed buffer with debug data, maybe containing last
618 * TX'ed commands and similar. The buffer will be vfree'd by the caller.
619 * Note that the transport must fill in the proper file headers.
621 struct iwl_trans_ops {
623 int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power);
624 void (*op_mode_leave)(struct iwl_trans *iwl_trans);
625 int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
627 int (*update_sf)(struct iwl_trans *trans,
628 struct iwl_sf_region *st_fwrd_space);
629 void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
630 void (*stop_device)(struct iwl_trans *trans, bool low_power);
632 void (*d3_suspend)(struct iwl_trans *trans, bool test, bool reset);
633 int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
634 bool test, bool reset);
636 int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
638 int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
639 struct iwl_device_cmd *dev_cmd, int queue);
640 void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
641 struct sk_buff_head *skbs);
643 void (*txq_enable)(struct iwl_trans *trans, int queue, u16 ssn,
644 const struct iwl_trans_txq_scd_cfg *cfg,
645 unsigned int queue_wdg_timeout);
646 void (*txq_disable)(struct iwl_trans *trans, int queue,
649 int (*wait_tx_queue_empty)(struct iwl_trans *trans, u32 txq_bm);
650 void (*freeze_txq_timer)(struct iwl_trans *trans, unsigned long txqs,
652 void (*block_txq_ptrs)(struct iwl_trans *trans, bool block);
654 void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
655 void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
656 u32 (*read32)(struct iwl_trans *trans, u32 ofs);
657 u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
658 void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
659 int (*read_mem)(struct iwl_trans *trans, u32 addr,
660 void *buf, int dwords);
661 int (*write_mem)(struct iwl_trans *trans, u32 addr,
662 const void *buf, int dwords);
663 void (*configure)(struct iwl_trans *trans,
664 const struct iwl_trans_config *trans_cfg);
665 void (*set_pmi)(struct iwl_trans *trans, bool state);
666 bool (*grab_nic_access)(struct iwl_trans *trans, unsigned long *flags);
667 void (*release_nic_access)(struct iwl_trans *trans,
668 unsigned long *flags);
669 void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
671 void (*ref)(struct iwl_trans *trans);
672 void (*unref)(struct iwl_trans *trans);
673 int (*suspend)(struct iwl_trans *trans);
674 void (*resume)(struct iwl_trans *trans);
676 struct iwl_trans_dump_data *(*dump_data)(struct iwl_trans *trans,
677 const struct iwl_fw_dbg_trigger_tlv
682 * enum iwl_trans_state - state of the transport layer
684 * @IWL_TRANS_NO_FW: no fw has sent an alive response
685 * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
687 enum iwl_trans_state {
689 IWL_TRANS_FW_ALIVE = 1,
693 * DOC: Platform power management
695 * There are two types of platform power management: system-wide
696 * (WoWLAN) and runtime.
698 * In system-wide power management the entire platform goes into a low
699 * power state (e.g. idle or suspend to RAM) at the same time and the
700 * device is configured as a wakeup source for the entire platform.
701 * This is usually triggered by userspace activity (e.g. the user
702 * presses the suspend button or a power management daemon decides to
703 * put the platform in low power mode). The device's behavior in this
704 * mode is dictated by the wake-on-WLAN configuration.
706 * In runtime power management, only the devices which are themselves
707 * idle enter a low power state. This is done at runtime, which means
708 * that the entire system is still running normally. This mode is
709 * usually triggered automatically by the device driver and requires
710 * the ability to enter and exit the low power modes in a very short
711 * time, so there is not much impact in usability.
713 * The terms used for the device's behavior are as follows:
715 * - D0: the device is fully powered and the host is awake;
716 * - D3: the device is in low power mode and only reacts to
717 * specific events (e.g. magic-packet received or scan
719 * - D0I3: the device is in low power mode and reacts to any
720 * activity (e.g. RX);
722 * These terms reflect the power modes in the firmware and are not to
723 * be confused with the physical device power state. The NIC can be
724 * in D0I3 mode even if, for instance, the PCI device is in D3 state.
728 * enum iwl_plat_pm_mode - platform power management mode
730 * This enumeration describes the device's platform power management
731 * behavior when in idle mode (i.e. runtime power management) or when
732 * in system-wide suspend (i.e WoWLAN).
734 * @IWL_PLAT_PM_MODE_DISABLED: power management is disabled for this
735 * device. At runtime, this means that nothing happens and the
736 * device always remains in active. In system-wide suspend mode,
737 * it means that the all connections will be closed automatically
738 * by mac80211 before the platform is suspended.
739 * @IWL_PLAT_PM_MODE_D3: the device goes into D3 mode (i.e. WoWLAN).
740 * For runtime power management, this mode is not officially
742 * @IWL_PLAT_PM_MODE_D0I3: the device goes into D0I3 mode.
744 enum iwl_plat_pm_mode {
745 IWL_PLAT_PM_MODE_DISABLED,
747 IWL_PLAT_PM_MODE_D0I3,
750 /* Max time to wait for trans to become idle/non-idle on d0i3
751 * enter/exit (in msecs).
753 #define IWL_TRANS_IDLE_TIMEOUT 2000
756 * struct iwl_trans - transport common data
758 * @ops - pointer to iwl_trans_ops
759 * @op_mode - pointer to the op_mode
760 * @cfg - pointer to the configuration
761 * @status: a bit-mask of transport status flags
762 * @dev - pointer to struct device * that represents the device
763 * @max_skb_frags: maximum number of fragments an SKB can have when transmitted.
764 * 0 indicates that frag SKBs (NETIF_F_SG) aren't supported.
765 * @hw_rf_id a u32 with the device RF ID
766 * @hw_id: a u32 with the ID of the device / sub-device.
767 * Set during transport allocation.
768 * @hw_id_str: a string with info about HW ID. Set during transport allocation.
769 * @pm_support: set to true in start_hw if link pm is supported
770 * @ltr_enabled: set to true if the LTR is enabled
771 * @num_rx_queues: number of RX queues allocated by the transport;
772 * the transport must set this before calling iwl_drv_start()
773 * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
774 * The user should use iwl_trans_{alloc,free}_tx_cmd.
775 * @dev_cmd_headroom: room needed for the transport's private use before the
776 * device_cmd for Tx - for internal use only
777 * The user should use iwl_trans_{alloc,free}_tx_cmd.
778 * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
779 * starting the firmware, used for tracing
780 * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
781 * start of the 802.11 header in the @rx_mpdu_cmd
782 * @dflt_pwr_limit: default power limit fetched from the platform (ACPI)
783 * @dbg_dest_tlv: points to the destination TLV for debug
784 * @dbg_conf_tlv: array of pointers to configuration TLVs for debug
785 * @dbg_trigger_tlv: array of pointers to triggers TLVs for debug
786 * @dbg_dest_reg_num: num of reg_ops in %dbg_dest_tlv
787 * @paging_req_addr: The location were the FW will upload / download the pages
788 * from. The address is set by the opmode
789 * @paging_db: Pointer to the opmode paging data base, the pointer is set by
791 * @paging_download_buf: Buffer used for copying all of the pages before
792 * downloading them to the FW. The buffer is allocated in the opmode
793 * @system_pm_mode: the system-wide power management mode in use.
794 * This mode is set dynamically, depending on the WoWLAN values
795 * configured from the userspace at runtime.
796 * @runtime_pm_mode: the runtime power management mode in use. This
797 * mode is set during the initialization phase and is not
798 * supposed to change during runtime.
801 const struct iwl_trans_ops *ops;
802 struct iwl_op_mode *op_mode;
803 const struct iwl_cfg *cfg;
804 enum iwl_trans_state state;
805 unsigned long status;
814 u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
819 const struct iwl_hcmd_arr *command_groups;
820 int command_groups_size;
824 /* The following fields are internal only */
825 struct kmem_cache *dev_cmd_pool;
826 size_t dev_cmd_headroom;
827 char dev_cmd_pool_name[50];
829 struct dentry *dbgfs_dir;
831 #ifdef CONFIG_LOCKDEP
832 struct lockdep_map sync_cmd_lockdep_map;
837 const struct iwl_fw_dbg_dest_tlv *dbg_dest_tlv;
838 const struct iwl_fw_dbg_conf_tlv *dbg_conf_tlv[FW_DBG_CONF_MAX];
839 struct iwl_fw_dbg_trigger_tlv * const *dbg_trigger_tlv;
843 * Paging parameters - All of the parameters should be set by the
844 * opmode when paging is enabled
847 struct iwl_fw_paging *paging_db;
848 void *paging_download_buf;
850 enum iwl_plat_pm_mode system_pm_mode;
851 enum iwl_plat_pm_mode runtime_pm_mode;
854 /* pointer to trans specific struct */
855 /*Ensure that this pointer will always be aligned to sizeof pointer */
856 char trans_specific[0] __aligned(sizeof(void *));
859 const char *iwl_get_cmd_string(struct iwl_trans *trans, u32 id);
860 int iwl_cmd_groups_verify_sorted(const struct iwl_trans_config *trans);
862 static inline void iwl_trans_configure(struct iwl_trans *trans,
863 const struct iwl_trans_config *trans_cfg)
865 trans->op_mode = trans_cfg->op_mode;
867 trans->ops->configure(trans, trans_cfg);
868 WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg));
871 static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power)
875 return trans->ops->start_hw(trans, low_power);
878 static inline int iwl_trans_start_hw(struct iwl_trans *trans)
880 return trans->ops->start_hw(trans, true);
883 static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans)
887 if (trans->ops->op_mode_leave)
888 trans->ops->op_mode_leave(trans);
890 trans->op_mode = NULL;
892 trans->state = IWL_TRANS_NO_FW;
895 static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
899 trans->state = IWL_TRANS_FW_ALIVE;
901 trans->ops->fw_alive(trans, scd_addr);
904 static inline int iwl_trans_start_fw(struct iwl_trans *trans,
905 const struct fw_img *fw,
910 WARN_ON_ONCE(!trans->rx_mpdu_cmd);
912 clear_bit(STATUS_FW_ERROR, &trans->status);
913 return trans->ops->start_fw(trans, fw, run_in_rfkill);
916 static inline int iwl_trans_update_sf(struct iwl_trans *trans,
917 struct iwl_sf_region *st_fwrd_space)
921 if (trans->ops->update_sf)
922 return trans->ops->update_sf(trans, st_fwrd_space);
927 static inline void _iwl_trans_stop_device(struct iwl_trans *trans,
932 trans->ops->stop_device(trans, low_power);
934 trans->state = IWL_TRANS_NO_FW;
937 static inline void iwl_trans_stop_device(struct iwl_trans *trans)
939 _iwl_trans_stop_device(trans, true);
942 static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test,
946 if (trans->ops->d3_suspend)
947 trans->ops->d3_suspend(trans, test, reset);
950 static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
951 enum iwl_d3_status *status,
952 bool test, bool reset)
955 if (!trans->ops->d3_resume)
958 return trans->ops->d3_resume(trans, status, test, reset);
961 static inline void iwl_trans_ref(struct iwl_trans *trans)
964 trans->ops->ref(trans);
967 static inline void iwl_trans_unref(struct iwl_trans *trans)
969 if (trans->ops->unref)
970 trans->ops->unref(trans);
973 static inline int iwl_trans_suspend(struct iwl_trans *trans)
975 if (!trans->ops->suspend)
978 return trans->ops->suspend(trans);
981 static inline void iwl_trans_resume(struct iwl_trans *trans)
983 if (trans->ops->resume)
984 trans->ops->resume(trans);
987 static inline struct iwl_trans_dump_data *
988 iwl_trans_dump_data(struct iwl_trans *trans,
989 const struct iwl_fw_dbg_trigger_tlv *trigger)
991 if (!trans->ops->dump_data)
993 return trans->ops->dump_data(trans, trigger);
996 static inline struct iwl_device_cmd *
997 iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
999 u8 *dev_cmd_ptr = kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
1001 if (unlikely(dev_cmd_ptr == NULL))
1004 return (struct iwl_device_cmd *)
1005 (dev_cmd_ptr + trans->dev_cmd_headroom);
1008 int iwl_trans_send_cmd(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
1010 static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
1011 struct iwl_device_cmd *dev_cmd)
1013 u8 *dev_cmd_ptr = (u8 *)dev_cmd - trans->dev_cmd_headroom;
1015 kmem_cache_free(trans->dev_cmd_pool, dev_cmd_ptr);
1018 static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
1019 struct iwl_device_cmd *dev_cmd, int queue)
1021 if (unlikely(test_bit(STATUS_FW_ERROR, &trans->status)))
1024 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1025 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1029 return trans->ops->tx(trans, skb, dev_cmd, queue);
1032 static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
1033 int ssn, struct sk_buff_head *skbs)
1035 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1036 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1040 trans->ops->reclaim(trans, queue, ssn, skbs);
1043 static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue,
1046 trans->ops->txq_disable(trans, queue, configure_scd);
1050 iwl_trans_txq_enable_cfg(struct iwl_trans *trans, int queue, u16 ssn,
1051 const struct iwl_trans_txq_scd_cfg *cfg,
1052 unsigned int queue_wdg_timeout)
1056 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1057 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1061 trans->ops->txq_enable(trans, queue, ssn, cfg, queue_wdg_timeout);
1064 static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
1065 int fifo, int sta_id, int tid,
1066 int frame_limit, u16 ssn,
1067 unsigned int queue_wdg_timeout)
1069 struct iwl_trans_txq_scd_cfg cfg = {
1073 .frame_limit = frame_limit,
1074 .aggregate = sta_id >= 0,
1077 iwl_trans_txq_enable_cfg(trans, queue, ssn, &cfg, queue_wdg_timeout);
1081 void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue, int fifo,
1082 unsigned int queue_wdg_timeout)
1084 struct iwl_trans_txq_scd_cfg cfg = {
1087 .tid = IWL_MAX_TID_COUNT,
1088 .frame_limit = IWL_FRAME_LIMIT,
1092 iwl_trans_txq_enable_cfg(trans, queue, 0, &cfg, queue_wdg_timeout);
1095 static inline void iwl_trans_freeze_txq_timer(struct iwl_trans *trans,
1099 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1100 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1104 if (trans->ops->freeze_txq_timer)
1105 trans->ops->freeze_txq_timer(trans, txqs, freeze);
1108 static inline void iwl_trans_block_txq_ptrs(struct iwl_trans *trans,
1111 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1112 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1116 if (trans->ops->block_txq_ptrs)
1117 trans->ops->block_txq_ptrs(trans, block);
1120 static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans,
1123 if (WARN_ON_ONCE(trans->state != IWL_TRANS_FW_ALIVE)) {
1124 IWL_ERR(trans, "%s bad state = %d\n", __func__, trans->state);
1128 return trans->ops->wait_tx_queue_empty(trans, txqs);
1131 static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
1133 trans->ops->write8(trans, ofs, val);
1136 static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
1138 trans->ops->write32(trans, ofs, val);
1141 static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
1143 return trans->ops->read32(trans, ofs);
1146 static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
1148 return trans->ops->read_prph(trans, ofs);
1151 static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
1154 return trans->ops->write_prph(trans, ofs, val);
1157 static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
1158 void *buf, int dwords)
1160 return trans->ops->read_mem(trans, addr, buf, dwords);
1163 #define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \
1165 if (__builtin_constant_p(bufsize)) \
1166 BUILD_BUG_ON((bufsize) % sizeof(u32)); \
1167 iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
1170 static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
1174 if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
1180 static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
1181 const void *buf, int dwords)
1183 return trans->ops->write_mem(trans, addr, buf, dwords);
1186 static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
1189 return iwl_trans_write_mem(trans, addr, &val, 1);
1192 static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
1194 if (trans->ops->set_pmi)
1195 trans->ops->set_pmi(trans, state);
1199 iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
1201 trans->ops->set_bits_mask(trans, reg, mask, value);
1204 #define iwl_trans_grab_nic_access(trans, flags) \
1205 __cond_lock(nic_access, \
1206 likely((trans)->ops->grab_nic_access(trans, flags)))
1208 static inline void __releases(nic_access)
1209 iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
1211 trans->ops->release_nic_access(trans, flags);
1212 __release(nic_access);
1215 static inline void iwl_trans_fw_error(struct iwl_trans *trans)
1217 if (WARN_ON_ONCE(!trans->op_mode))
1220 /* prevent double restarts due to the same erroneous FW */
1221 if (!test_and_set_bit(STATUS_FW_ERROR, &trans->status))
1222 iwl_op_mode_nic_error(trans->op_mode);
1225 /*****************************************************
1226 * transport helper functions
1227 *****************************************************/
1228 struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
1230 const struct iwl_cfg *cfg,
1231 const struct iwl_trans_ops *ops,
1232 size_t dev_cmd_headroom);
1233 void iwl_trans_free(struct iwl_trans *trans);
1235 /*****************************************************
1236 * driver (transport) register/unregister functions
1237 ******************************************************/
1238 int __must_check iwl_pci_register_driver(void);
1239 void iwl_pci_unregister_driver(void);
1241 #endif /* __iwl_trans_h__ */