1 /******************************************************************************
3 * This file is provided under a dual BSD/GPLv2 license. When using or
4 * redistributing this file, you may do so under either license.
8 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
9 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
10 * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of version 2 of the GNU General Public License as
14 * published by the Free Software Foundation.
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
19 * General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; if not, write to the Free Software
23 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
26 * The full GNU General Public License is included in this distribution
27 * in the file called COPYING.
29 * Contact Information:
30 * Intel Linux Wireless <linuxwifi@intel.com>
31 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
35 * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved.
36 * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH
37 * Copyright(c) 2015 - 2016 Intel Deutschland GmbH
38 * All rights reserved.
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
44 * * Redistributions of source code must retain the above copyright
45 * notice, this list of conditions and the following disclaimer.
46 * * Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in
48 * the documentation and/or other materials provided with the
50 * * Neither the name Intel Corporation nor the names of its
51 * contributors may be used to endorse or promote products derived
52 * from this software without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
55 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
56 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
57 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
58 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
59 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
60 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
61 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
62 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
63 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
64 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
66 *****************************************************************************/
71 #include <linux/spinlock.h>
72 #include <net/mac80211.h>
73 #include <linux/wait.h>
75 #include "iwl-trans.h" /* for IWL_MAX_TID_COUNT */
76 #include "fw-api.h" /* IWL_MVM_STATION_COUNT */
83 * DOC: DQA - Dynamic Queue Allocation -introduction
85 * Dynamic Queue Allocation (AKA "DQA") is a feature implemented in iwlwifi
86 * driver to allow dynamic allocation of queues on-demand, rather than allocate
87 * them statically ahead of time. Ideally, we would like to allocate one queue
88 * per RA/TID, thus allowing an AP - for example - to send BE traffic to STA2
89 * even if it also needs to send traffic to a sleeping STA1, without being
90 * blocked by the sleeping station.
92 * Although the queues in DQA mode are dynamically allocated, there are still
93 * some queues that are statically allocated:
94 * TXQ #0 - command queue
96 * TXQ #2 - P2P device frames
97 * TXQ #3 - P2P GO/SoftAP GCAST/BCAST frames
98 * TXQ #4 - BSS DATA frames queue
99 * TXQ #5-8 - Non-QoS and MGMT frames queue pool
100 * TXQ #9 - P2P GO/SoftAP probe responses
101 * TXQ #10-31 - DATA frames queue pool
102 * The queues are dynamically taken from either the MGMT frames queue pool or
103 * the DATA frames one. See the %iwl_mvm_dqa_txq for more information on every
106 * When a frame for a previously unseen RA/TID comes in, it needs to be deferred
107 * until a queue is allocated for it, and only then can be TXed. Therefore, it
108 * is placed into %iwl_mvm_tid_data.deferred_tx_frames, and a worker called
109 * %mvm->add_stream_wk later allocates the queues and TXes the deferred frames.
111 * For convenience, MGMT is considered as if it has TID=8, and go to the MGMT
112 * queues in the pool. If there is no longer a free MGMT queue to allocate, a
113 * queue will be allocated from the DATA pool instead. Since QoS NDPs can create
114 * a problem for aggregations, they too will use a MGMT queue.
116 * When adding a STA, a DATA queue is reserved for it so that it can TX from
117 * it. If no such free queue exists for reserving, the STA addition will fail.
119 * If the DATA queue pool gets exhausted, no new STA will be accepted, and if a
120 * new RA/TID comes in for an existing STA, one of the STA's queues will become
121 * shared and will serve more than the single TID (but always for the same RA!).
123 * When a RA/TID needs to become aggregated, no new queue is required to be
124 * allocated, only mark the queue as aggregated via the ADD_STA command. Note,
125 * however, that a shared queue cannot be aggregated, and only after the other
126 * TIDs become inactive and are removed - only then can the queue be
127 * reconfigured and become aggregated.
129 * When removing a station, its queues are returned to the pool for reuse. Here
130 * we also need to make sure that we are synced with the worker thread that TXes
131 * the deferred frames so we don't get into a situation where the queues are
132 * removed and then the worker puts deferred frames onto the released queues or
133 * tries to allocate new queues for a STA we don't need anymore.
137 * DOC: station table - introduction
139 * The station table is a list of data structure that reprensent the stations.
140 * In STA/P2P client mode, the driver will hold one station for the AP/ GO.
141 * In GO/AP mode, the driver will have as many stations as associated clients.
142 * All these stations are reflected in the fw's station table. The driver
143 * keeps the fw's station table up to date with the ADD_STA command. Stations
144 * can be removed by the REMOVE_STA command.
146 * All the data related to a station is held in the structure %iwl_mvm_sta
147 * which is embed in the mac80211's %ieee80211_sta (in the drv_priv) area.
148 * This data includes the index of the station in the fw, per tid information
149 * (sequence numbers, Block-ack state machine, etc...). The stations are
150 * created and deleted by the %sta_state callback from %ieee80211_ops.
152 * The driver holds a map: %fw_id_to_mac_id that allows to fetch a
153 * %ieee80211_sta (and the %iwl_mvm_sta embedded into it) based on a fw
154 * station index. That way, the driver is able to get the tid related data in
155 * O(1) in time sensitive paths (Tx / Tx response / BA notification). These
156 * paths are triggered by the fw, and the driver needs to get a pointer to the
157 * %ieee80211 structure. This map helps to get that pointer quickly.
161 * DOC: station table - locking
163 * As stated before, the station is created / deleted by mac80211's %sta_state
164 * callback from %ieee80211_ops which can sleep. The next paragraph explains
165 * the locking of a single stations, the next ones relates to the station
168 * The station holds the sequence number per tid. So this data needs to be
169 * accessed in the Tx path (which is softIRQ). It also holds the Block-Ack
170 * information (the state machine / and the logic that checks if the queues
171 * were drained), so it also needs to be accessible from the Tx response flow.
172 * In short, the station needs to be access from sleepable context as well as
173 * from tasklets, so the station itself needs a spinlock.
175 * The writers of %fw_id_to_mac_id map are serialized by the global mutex of
176 * the mvm op_mode. This is possible since %sta_state can sleep.
177 * The pointers in this map are RCU protected, hence we won't replace the
178 * station while we have Tx / Tx response / BA notification running.
180 * If a station is deleted while it still has packets in its A-MPDU queues,
181 * then the reclaim flow will notice that there is no station in the map for
182 * sta_id and it will dump the responses.
186 * DOC: station table - internal stations
188 * The FW needs a few internal stations that are not reflected in
189 * mac80211, such as broadcast station in AP / GO mode, or AUX sta for
190 * scanning and P2P device (during the GO negotiation).
191 * For these kind of stations we have %iwl_mvm_int_sta struct which holds the
192 * data relevant for them from both %iwl_mvm_sta and %ieee80211_sta.
193 * Usually the data for these stations is static, so no locking is required,
194 * and no TID data as this is also not needed.
195 * One thing to note, is that these stations have an ID in the fw, but not
196 * in mac80211. In order to "reserve" them a sta_id in %fw_id_to_mac_id
197 * we fill ERR_PTR(EINVAL) in this mapping and all other dereferencing of
198 * pointers from this mapping need to check that the value is not error
201 * Currently there is only one auxiliary station for scanning, initialized
206 * DOC: station table - AP Station in STA mode
208 * %iwl_mvm_vif includes the index of the AP station in the fw's STA table:
209 * %ap_sta_id. To get the point to the corresponding %ieee80211_sta,
210 * &fw_id_to_mac_id can be used. Due to the way the fw works, we must not remove
211 * the AP station from the fw before setting the MAC context as unassociated.
212 * Hence, %fw_id_to_mac_id[%ap_sta_id] will be NULLed when the AP station is
213 * removed by mac80211, but the station won't be removed in the fw until the
214 * VIF is set as unassociated. Then, %ap_sta_id will be invalidated.
218 * DOC: station table - Drain vs. Flush
220 * Flush means that all the frames in the SCD queue are dumped regardless the
221 * station to which they were sent. We do that when we disassociate and before
222 * we remove the STA of the AP. The flush can be done synchronously against the
224 * Drain means that the fw will drop all the frames sent to a specific station.
225 * This is useful when a client (if we are IBSS / GO or AP) disassociates. In
226 * that case, we need to drain all the frames for that client from the AC queues
227 * that are shared with the other clients. Only then, we can remove the STA in
228 * the fw. In order to do so, we track the non-AMPDU packets for each station.
229 * If mac80211 removes a STA and if it still has non-AMPDU packets pending in
230 * the queues, we mark this station as %EBUSY in %fw_id_to_mac_id, and drop all
231 * the frames for this STA (%iwl_mvm_rm_sta). When the last frame is dropped
232 * (we know about it with its Tx response), we remove the station in fw and set
233 * it as %NULL in %fw_id_to_mac_id: this is the purpose of
234 * %iwl_mvm_sta_drained_wk.
238 * DOC: station table - fw restart
240 * When the fw asserts, or we have any other issue that requires to reset the
241 * driver, we require mac80211 to reconfigure the driver. Since the private
242 * data of the stations is embed in mac80211's %ieee80211_sta, that data will
243 * not be zeroed and needs to be reinitialized manually.
244 * %IWL_MVM_STATUS_IN_HW_RESTART is set during restart and that will hint us
245 * that we must not allocate a new sta_id but reuse the previous one. This
246 * means that the stations being re-added after the reset will have the same
247 * place in the fw as before the reset. We do need to zero the %fw_id_to_mac_id
248 * map, since the stations aren't in the fw any more. Internal stations that
249 * are not added by mac80211 will be re-added in the init flow that is called
250 * after the restart: mac80211 call's %iwl_mvm_mac_start which calls to
257 * When a station is asleep, the fw will set it as "asleep". All frames on
258 * shared queues (i.e. non-aggregation queues) to that station will be dropped
259 * by the fw (%TX_STATUS_FAIL_DEST_PS failure code).
261 * AMPDUs are in a separate queue that is stopped by the fw. We just need to
262 * let mac80211 know when there are frames in these queues so that it can
263 * properly handle trigger frames.
265 * When a trigger frame is received, mac80211 tells the driver to send frames
266 * from the AMPDU queues or sends frames to non-aggregation queues itself,
267 * depending on which ACs are delivery-enabled and what TID has frames to
268 * transmit. Note that mac80211 has all the knowledge since all the non-agg
269 * frames are buffered / filtered, and the driver tells mac80211 about agg
270 * frames). The driver needs to tell the fw to let frames out even if the
271 * station is asleep. This is done by %iwl_mvm_sta_modify_sleep_tx_count.
273 * When we receive a frame from that station with PM bit unset, the driver
274 * needs to let the fw know that this station isn't asleep any more. This is
275 * done by %iwl_mvm_sta_modify_ps_wake in response to mac80211 signaling the
278 * For a GO, the Service Period might be cut short due to an absence period
279 * of the GO. In this (and all other cases) the firmware notifies us with the
280 * EOSP_NOTIFICATION, and we notify mac80211 of that. Further frames that we
281 * already sent to the device will be rejected again.
283 * See also "AP support for powersaving clients" in mac80211.h.
287 * enum iwl_mvm_agg_state
289 * The state machine of the BA agreement establishment / tear down.
290 * These states relate to a specific RA / TID.
292 * @IWL_AGG_OFF: aggregation is not used
293 * @IWL_AGG_STARTING: aggregation are starting (between start and oper)
294 * @IWL_AGG_ON: aggregation session is up
295 * @IWL_EMPTYING_HW_QUEUE_ADDBA: establishing a BA session - waiting for the
296 * HW queue to be empty from packets for this RA /TID.
297 * @IWL_EMPTYING_HW_QUEUE_DELBA: tearing down a BA session - waiting for the
298 * HW queue to be empty from packets for this RA /TID.
300 enum iwl_mvm_agg_state {
304 IWL_EMPTYING_HW_QUEUE_ADDBA,
305 IWL_EMPTYING_HW_QUEUE_DELBA,
309 * struct iwl_mvm_tid_data - holds the states for each RA / TID
310 * @deferred_tx_frames: deferred TX frames for this RA/TID
311 * @seq_number: the next WiFi sequence number to use
312 * @next_reclaimed: the WiFi sequence number of the next packet to be acked.
313 * This is basically (last acked packet++).
314 * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the
315 * Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA).
316 * @amsdu_in_ampdu_allowed: true if A-MSDU in A-MPDU is allowed.
317 * @state: state of the BA agreement establishment / tear down.
318 * @txq_id: Tx queue used by the BA session / DQA
319 * @ssn: the first packet to be sent in AGG HW queue in Tx AGG start flow, or
320 * the first packet to be sent in legacy HW queue in Tx AGG stop flow.
321 * Basically when next_reclaimed reaches ssn, we can tell mac80211 that
322 * we are ready to finish the Tx AGG stop / start flow.
323 * @tx_time: medium time consumed by this A-MPDU
324 * @is_tid_active: has this TID sent traffic in the last
325 * %IWL_MVM_DQA_QUEUE_TIMEOUT time period. If %txq_id is invalid, this
326 * field should be ignored.
328 struct iwl_mvm_tid_data {
329 struct sk_buff_head deferred_tx_frames;
332 /* The rest is Tx AGG related */
334 bool amsdu_in_ampdu_allowed;
335 enum iwl_mvm_agg_state state;
342 static inline u16 iwl_mvm_tid_queued(struct iwl_mvm_tid_data *tid_data)
344 return ieee80211_sn_sub(IEEE80211_SEQ_TO_SN(tid_data->seq_number),
345 tid_data->next_reclaimed);
348 struct iwl_mvm_key_pn {
349 struct rcu_head rcu_head;
351 u8 pn[IWL_MAX_TID_COUNT][IEEE80211_CCMP_PN_LEN];
352 } ____cacheline_aligned_in_smp q[];
355 struct iwl_mvm_delba_data {
359 struct iwl_mvm_delba_notif {
360 struct iwl_mvm_internal_rxq_notif metadata;
361 struct iwl_mvm_delba_data delba;
365 * struct iwl_mvm_rxq_dup_data - per station per rx queue data
366 * @last_seq: last sequence per tid for duplicate packet detection
367 * @last_sub_frame: last subframe packet
369 struct iwl_mvm_rxq_dup_data {
370 __le16 last_seq[IWL_MAX_TID_COUNT + 1];
371 u8 last_sub_frame[IWL_MAX_TID_COUNT + 1];
372 } ____cacheline_aligned_in_smp;
375 * struct iwl_mvm_sta - representation of a station in the driver
376 * @sta_id: the index of the station in the fw (will be replaced by id_n_color)
377 * @tfd_queue_msk: the tfd queues used by the station
378 * @hw_queue: per-AC mapping of the TFD queues used by station
379 * @mac_id_n_color: the MAC context this station is linked to
380 * @tid_disable_agg: bitmap: if bit(tid) is set, the fw won't send ampdus for
382 * @max_agg_bufsize: the maximal size of the AGG buffer for this station
383 * @sta_type: station type
384 * @bt_reduced_txpower: is reduced tx power enabled for this station
385 * @next_status_eosp: the next reclaimed packet is a PS-Poll response and
386 * we need to signal the EOSP
387 * @lock: lock to protect the whole struct. Since %tid_data is access from Tx
388 * and from Tx response flow, it needs a spinlock.
389 * @tid_data: per tid data + mgmt. Look at %iwl_mvm_tid_data.
390 * @tid_to_baid: a simple map of TID to baid
391 * @reserved_queue: the queue reserved for this STA for DQA purposes
392 * Every STA has is given one reserved queue to allow it to operate. If no
393 * such queue can be guaranteed, the STA addition will fail.
394 * @tx_protection: reference counter for controlling the Tx protection.
395 * @tt_tx_protection: is thermal throttling enable Tx protection?
396 * @disable_tx: is tx to this STA disabled?
397 * @tlc_amsdu: true if A-MSDU is allowed
398 * @agg_tids: bitmap of tids whose status is operational aggregated (IWL_AGG_ON)
399 * @sleep_tx_count: the number of frames that we told the firmware to let out
400 * even when that station is asleep. This is useful in case the queue
401 * gets empty before all the frames were sent, which can happen when
402 * we are sending frames from an AMPDU queue and there was a hole in
403 * the BA window. To be used for UAPSD only.
404 * @ptk_pn: per-queue PTK PN data structures
405 * @dup_data: per queue duplicate packet detection data
406 * @deferred_traffic_tid_map: indication bitmap of deferred traffic per-TID
408 * When mac80211 creates a station it reserves some space (hw->sta_data_size)
409 * in the structure for use by driver. This structure is placed in that
416 u8 hw_queue[IEEE80211_NUM_ACS];
420 enum iwl_sta_type sta_type;
421 bool bt_reduced_txpower;
422 bool next_status_eosp;
424 struct iwl_mvm_tid_data tid_data[IWL_MAX_TID_COUNT + 1];
425 u8 tid_to_baid[IWL_MAX_TID_COUNT];
426 struct iwl_lq_sta lq_sta;
427 struct ieee80211_vif *vif;
428 struct iwl_mvm_key_pn __rcu *ptk_pn[4];
429 struct iwl_mvm_rxq_dup_data *dup_data;
431 u16 deferred_traffic_tid_map;
435 /* Temporary, until the new TLC will control the Tx protection */
437 bool tt_tx_protection;
448 static inline struct iwl_mvm_sta *
449 iwl_mvm_sta_from_mac80211(struct ieee80211_sta *sta)
451 return (void *)sta->drv_priv;
455 * struct iwl_mvm_int_sta - representation of an internal station (auxiliary or
457 * @sta_id: the index of the station in the fw (will be replaced by id_n_color)
458 * @type: station type
459 * @tfd_queue_msk: the tfd queues used by the station
461 struct iwl_mvm_int_sta {
463 enum iwl_sta_type type;
468 * Send the STA info to the FW.
470 * @mvm: the iwl_mvm* to use
472 * @update: this is true if the FW is being updated about a STA it already knows
473 * about. Otherwise (if this is a new STA), this should be false.
474 * @flags: if update==true, this marks what is being changed via ORs of values
475 * from enum iwl_sta_modify_flag. Otherwise, this is ignored.
477 int iwl_mvm_sta_send_to_fw(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
478 bool update, unsigned int flags);
479 int iwl_mvm_add_sta(struct iwl_mvm *mvm,
480 struct ieee80211_vif *vif,
481 struct ieee80211_sta *sta);
483 static inline int iwl_mvm_update_sta(struct iwl_mvm *mvm,
484 struct ieee80211_vif *vif,
485 struct ieee80211_sta *sta)
487 return iwl_mvm_sta_send_to_fw(mvm, sta, true, 0);
490 int iwl_mvm_rm_sta(struct iwl_mvm *mvm,
491 struct ieee80211_vif *vif,
492 struct ieee80211_sta *sta);
493 int iwl_mvm_rm_sta_id(struct iwl_mvm *mvm,
494 struct ieee80211_vif *vif,
496 int iwl_mvm_set_sta_key(struct iwl_mvm *mvm,
497 struct ieee80211_vif *vif,
498 struct ieee80211_sta *sta,
499 struct ieee80211_key_conf *keyconf,
501 int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm,
502 struct ieee80211_vif *vif,
503 struct ieee80211_sta *sta,
504 struct ieee80211_key_conf *keyconf);
506 void iwl_mvm_update_tkip_key(struct iwl_mvm *mvm,
507 struct ieee80211_vif *vif,
508 struct ieee80211_key_conf *keyconf,
509 struct ieee80211_sta *sta, u32 iv32,
512 void iwl_mvm_rx_eosp_notif(struct iwl_mvm *mvm,
513 struct iwl_rx_cmd_buffer *rxb);
516 int iwl_mvm_sta_rx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
517 int tid, u16 ssn, bool start, u8 buf_size, u16 timeout);
518 int iwl_mvm_sta_tx_agg_start(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
519 struct ieee80211_sta *sta, u16 tid, u16 *ssn);
520 int iwl_mvm_sta_tx_agg_oper(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
521 struct ieee80211_sta *sta, u16 tid, u8 buf_size,
523 int iwl_mvm_sta_tx_agg_stop(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
524 struct ieee80211_sta *sta, u16 tid);
525 int iwl_mvm_sta_tx_agg_flush(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
526 struct ieee80211_sta *sta, u16 tid);
528 int iwl_mvm_sta_tx_agg(struct iwl_mvm *mvm, struct ieee80211_sta *sta,
529 int tid, u8 queue, bool start);
531 int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm);
532 void iwl_mvm_del_aux_sta(struct iwl_mvm *mvm);
534 int iwl_mvm_alloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
535 int iwl_mvm_send_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
536 int iwl_mvm_add_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
537 int iwl_mvm_send_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
538 int iwl_mvm_rm_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
539 int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
540 int iwl_mvm_rm_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
541 int iwl_mvm_allocate_int_sta(struct iwl_mvm *mvm,
542 struct iwl_mvm_int_sta *sta,
543 u32 qmask, enum nl80211_iftype iftype,
544 enum iwl_sta_type type);
545 void iwl_mvm_dealloc_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
546 void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta);
547 int iwl_mvm_add_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
548 int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
549 void iwl_mvm_dealloc_snif_sta(struct iwl_mvm *mvm);
551 void iwl_mvm_sta_drained_wk(struct work_struct *wk);
552 void iwl_mvm_sta_modify_ps_wake(struct iwl_mvm *mvm,
553 struct ieee80211_sta *sta);
554 void iwl_mvm_sta_modify_sleep_tx_count(struct iwl_mvm *mvm,
555 struct ieee80211_sta *sta,
556 enum ieee80211_frame_release_type reason,
557 u16 cnt, u16 tids, bool more_data,
558 bool single_sta_queue);
559 int iwl_mvm_drain_sta(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta,
561 void iwl_mvm_sta_modify_disable_tx(struct iwl_mvm *mvm,
562 struct iwl_mvm_sta *mvmsta, bool disable);
563 void iwl_mvm_sta_modify_disable_tx_ap(struct iwl_mvm *mvm,
564 struct ieee80211_sta *sta,
566 void iwl_mvm_modify_all_sta_disable_tx(struct iwl_mvm *mvm,
567 struct iwl_mvm_vif *mvmvif,
569 void iwl_mvm_csa_client_absent(struct iwl_mvm *mvm, struct ieee80211_vif *vif);
570 void iwl_mvm_add_new_dqa_stream_wk(struct work_struct *wk);
572 int iwl_mvm_scd_queue_redirect(struct iwl_mvm *mvm, int queue, int tid,
573 int ac, int ssn, unsigned int wdg_timeout,
576 #endif /* __sta_h__ */