1 /******************************************************************************
3 Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 Intel Linux Wireless <ilw@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <j@w1.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then refers to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/errno.h>
138 #include <linux/if_arp.h>
139 #include <linux/in6.h>
140 #include <linux/in.h>
141 #include <linux/ip.h>
142 #include <linux/kernel.h>
143 #include <linux/kmod.h>
144 #include <linux/module.h>
145 #include <linux/netdevice.h>
146 #include <linux/ethtool.h>
147 #include <linux/pci.h>
148 #include <linux/dma-mapping.h>
149 #include <linux/proc_fs.h>
150 #include <linux/skbuff.h>
151 #include <asm/uaccess.h>
153 #include <linux/fs.h>
154 #include <linux/mm.h>
155 #include <linux/slab.h>
156 #include <linux/unistd.h>
157 #include <linux/stringify.h>
158 #include <linux/tcp.h>
159 #include <linux/types.h>
160 #include <linux/time.h>
161 #include <linux/firmware.h>
162 #include <linux/acpi.h>
163 #include <linux/ctype.h>
164 #include <linux/pm_qos.h>
166 #include <net/lib80211.h>
171 #define IPW2100_VERSION "git-1.2.2"
173 #define DRV_NAME "ipw2100"
174 #define DRV_VERSION IPW2100_VERSION
175 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
176 #define DRV_COPYRIGHT "Copyright(c) 2003-2006 Intel Corporation"
178 static struct pm_qos_request ipw2100_pm_qos_req;
180 /* Debugging stuff */
181 #ifdef CONFIG_IPW2100_DEBUG
182 #define IPW2100_RX_DEBUG /* Reception debugging */
185 MODULE_DESCRIPTION(DRV_DESCRIPTION);
186 MODULE_VERSION(DRV_VERSION);
187 MODULE_AUTHOR(DRV_COPYRIGHT);
188 MODULE_LICENSE("GPL");
190 static int debug = 0;
191 static int network_mode = 0;
192 static int channel = 0;
193 static int associate = 0;
194 static int disable = 0;
196 static struct ipw2100_fw ipw2100_firmware;
199 #include <linux/moduleparam.h>
200 module_param(debug, int, 0444);
201 module_param_named(mode, network_mode, int, 0444);
202 module_param(channel, int, 0444);
203 module_param(associate, int, 0444);
204 module_param(disable, int, 0444);
206 MODULE_PARM_DESC(debug, "debug level");
207 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
208 MODULE_PARM_DESC(channel, "channel");
209 MODULE_PARM_DESC(associate, "auto associate when scanning (default off)");
210 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
212 static u32 ipw2100_debug_level = IPW_DL_NONE;
214 #ifdef CONFIG_IPW2100_DEBUG
215 #define IPW_DEBUG(level, message...) \
217 if (ipw2100_debug_level & (level)) { \
218 printk(KERN_DEBUG "ipw2100: %c %s ", \
219 in_interrupt() ? 'I' : 'U', __func__); \
224 #define IPW_DEBUG(level, message...) do {} while (0)
225 #endif /* CONFIG_IPW2100_DEBUG */
227 #ifdef CONFIG_IPW2100_DEBUG
228 static const char *command_types[] = {
230 "unused", /* HOST_ATTENTION */
232 "unused", /* SLEEP */
233 "unused", /* HOST_POWER_DOWN */
236 "unused", /* SET_IMR */
239 "AUTHENTICATION_TYPE",
242 "INTERNATIONAL_MODE",
257 "CLEAR_ALL_MULTICAST",
278 "AP_OR_STATION_TABLE",
282 "unused", /* SAVE_CALIBRATION */
283 "unused", /* RESTORE_CALIBRATION */
287 "HOST_PRE_POWER_DOWN",
288 "unused", /* HOST_INTERRUPT_COALESCING */
290 "CARD_DISABLE_PHY_OFF",
293 "SET_STATION_STAT_BITS",
294 "CLEAR_STATIONS_STAT_BITS",
296 "SET_SECURITY_INFORMATION",
297 "DISASSOCIATION_BSSID",
302 static const long ipw2100_frequencies[] = {
303 2412, 2417, 2422, 2427,
304 2432, 2437, 2442, 2447,
305 2452, 2457, 2462, 2467,
309 #define FREQ_COUNT ARRAY_SIZE(ipw2100_frequencies)
311 static struct ieee80211_rate ipw2100_bg_rates[] = {
313 { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
314 { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
315 { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE },
318 #define RATE_COUNT ARRAY_SIZE(ipw2100_bg_rates)
320 /* Pre-decl until we get the code solid and then we can clean it up */
321 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
322 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
323 static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
325 static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
326 static void ipw2100_queues_free(struct ipw2100_priv *priv);
327 static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
329 static int ipw2100_fw_download(struct ipw2100_priv *priv,
330 struct ipw2100_fw *fw);
331 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
332 struct ipw2100_fw *fw);
333 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
335 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
337 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
338 struct ipw2100_fw *fw);
339 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
340 struct ipw2100_fw *fw);
341 static void ipw2100_wx_event_work(struct work_struct *work);
342 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev);
343 static struct iw_handler_def ipw2100_wx_handler_def;
345 static inline void read_register(struct net_device *dev, u32 reg, u32 * val)
347 struct ipw2100_priv *priv = libipw_priv(dev);
349 *val = ioread32(priv->ioaddr + reg);
350 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
353 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
355 struct ipw2100_priv *priv = libipw_priv(dev);
357 iowrite32(val, priv->ioaddr + reg);
358 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
361 static inline void read_register_word(struct net_device *dev, u32 reg,
364 struct ipw2100_priv *priv = libipw_priv(dev);
366 *val = ioread16(priv->ioaddr + reg);
367 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
370 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val)
372 struct ipw2100_priv *priv = libipw_priv(dev);
374 *val = ioread8(priv->ioaddr + reg);
375 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
378 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
380 struct ipw2100_priv *priv = libipw_priv(dev);
382 iowrite16(val, priv->ioaddr + reg);
383 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
386 static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
388 struct ipw2100_priv *priv = libipw_priv(dev);
390 iowrite8(val, priv->ioaddr + reg);
391 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
394 static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val)
396 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
397 addr & IPW_REG_INDIRECT_ADDR_MASK);
398 read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
401 static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
403 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
404 addr & IPW_REG_INDIRECT_ADDR_MASK);
405 write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
408 static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val)
410 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
411 addr & IPW_REG_INDIRECT_ADDR_MASK);
412 read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
415 static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
417 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
418 addr & IPW_REG_INDIRECT_ADDR_MASK);
419 write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
422 static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val)
424 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
425 addr & IPW_REG_INDIRECT_ADDR_MASK);
426 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
429 static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
431 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
432 addr & IPW_REG_INDIRECT_ADDR_MASK);
433 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
436 static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
438 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
439 addr & IPW_REG_INDIRECT_ADDR_MASK);
442 static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
444 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
447 static void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
455 /* read first nibble byte by byte */
456 aligned_addr = addr & (~0x3);
457 dif_len = addr - aligned_addr;
459 /* Start reading at aligned_addr + dif_len */
460 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
462 for (i = dif_len; i < 4; i++, buf++)
463 write_register_byte(dev,
464 IPW_REG_INDIRECT_ACCESS_DATA + i,
471 /* read DWs through autoincrement registers */
472 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
473 aligned_len = len & (~0x3);
474 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
475 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf);
477 /* copy the last nibble */
478 dif_len = len - aligned_len;
479 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
480 for (i = 0; i < dif_len; i++, buf++)
481 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
485 static void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
493 /* read first nibble byte by byte */
494 aligned_addr = addr & (~0x3);
495 dif_len = addr - aligned_addr;
497 /* Start reading at aligned_addr + dif_len */
498 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
500 for (i = dif_len; i < 4; i++, buf++)
501 read_register_byte(dev,
502 IPW_REG_INDIRECT_ACCESS_DATA + i,
509 /* read DWs through autoincrement registers */
510 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
511 aligned_len = len & (~0x3);
512 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
513 read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf);
515 /* copy the last nibble */
516 dif_len = len - aligned_len;
517 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
518 for (i = 0; i < dif_len; i++, buf++)
519 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
522 static bool ipw2100_hw_is_adapter_in_system(struct net_device *dev)
526 read_register(dev, IPW_REG_DOA_DEBUG_AREA_START, &dbg);
528 return dbg == IPW_DATA_DOA_DEBUG_VALUE;
531 static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
532 void *val, u32 * len)
534 struct ipw2100_ordinals *ordinals = &priv->ordinals;
541 if (ordinals->table1_addr == 0) {
542 printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
543 "before they have been loaded.\n");
547 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
548 if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
549 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
551 printk(KERN_WARNING DRV_NAME
552 ": ordinal buffer length too small, need %zd\n",
553 IPW_ORD_TAB_1_ENTRY_SIZE);
558 read_nic_dword(priv->net_dev,
559 ordinals->table1_addr + (ord << 2), &addr);
560 read_nic_dword(priv->net_dev, addr, val);
562 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
567 if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
569 ord -= IPW_START_ORD_TAB_2;
571 /* get the address of statistic */
572 read_nic_dword(priv->net_dev,
573 ordinals->table2_addr + (ord << 3), &addr);
575 /* get the second DW of statistics ;
576 * two 16-bit words - first is length, second is count */
577 read_nic_dword(priv->net_dev,
578 ordinals->table2_addr + (ord << 3) + sizeof(u32),
581 /* get each entry length */
582 field_len = *((u16 *) & field_info);
584 /* get number of entries */
585 field_count = *(((u16 *) & field_info) + 1);
587 /* abort if no enough memory */
588 total_length = field_len * field_count;
589 if (total_length > *len) {
598 /* read the ordinal data from the SRAM */
599 read_nic_memory(priv->net_dev, addr, total_length, val);
604 printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
605 "in table 2\n", ord);
610 static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val,
613 struct ipw2100_ordinals *ordinals = &priv->ordinals;
616 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
617 if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
618 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
619 IPW_DEBUG_INFO("wrong size\n");
623 read_nic_dword(priv->net_dev,
624 ordinals->table1_addr + (ord << 2), &addr);
626 write_nic_dword(priv->net_dev, addr, *val);
628 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
633 IPW_DEBUG_INFO("wrong table\n");
634 if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
640 static char *snprint_line(char *buf, size_t count,
641 const u8 * data, u32 len, u32 ofs)
646 out = snprintf(buf, count, "%08X", ofs);
648 for (l = 0, i = 0; i < 2; i++) {
649 out += snprintf(buf + out, count - out, " ");
650 for (j = 0; j < 8 && l < len; j++, l++)
651 out += snprintf(buf + out, count - out, "%02X ",
654 out += snprintf(buf + out, count - out, " ");
657 out += snprintf(buf + out, count - out, " ");
658 for (l = 0, i = 0; i < 2; i++) {
659 out += snprintf(buf + out, count - out, " ");
660 for (j = 0; j < 8 && l < len; j++, l++) {
661 c = data[(i * 8 + j)];
662 if (!isascii(c) || !isprint(c))
665 out += snprintf(buf + out, count - out, "%c", c);
669 out += snprintf(buf + out, count - out, " ");
675 static void printk_buf(int level, const u8 * data, u32 len)
679 if (!(ipw2100_debug_level & level))
683 printk(KERN_DEBUG "%s\n",
684 snprint_line(line, sizeof(line), &data[ofs],
685 min(len, 16U), ofs));
687 len -= min(len, 16U);
691 #define MAX_RESET_BACKOFF 10
693 static void schedule_reset(struct ipw2100_priv *priv)
695 unsigned long now = get_seconds();
697 /* If we haven't received a reset request within the backoff period,
698 * then we can reset the backoff interval so this reset occurs
700 if (priv->reset_backoff &&
701 (now - priv->last_reset > priv->reset_backoff))
702 priv->reset_backoff = 0;
704 priv->last_reset = get_seconds();
706 if (!(priv->status & STATUS_RESET_PENDING)) {
707 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
708 priv->net_dev->name, priv->reset_backoff);
709 netif_carrier_off(priv->net_dev);
710 netif_stop_queue(priv->net_dev);
711 priv->status |= STATUS_RESET_PENDING;
712 if (priv->reset_backoff)
713 schedule_delayed_work(&priv->reset_work,
714 priv->reset_backoff * HZ);
716 schedule_delayed_work(&priv->reset_work, 0);
718 if (priv->reset_backoff < MAX_RESET_BACKOFF)
719 priv->reset_backoff++;
721 wake_up_interruptible(&priv->wait_command_queue);
723 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
724 priv->net_dev->name);
728 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
729 static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
730 struct host_command *cmd)
732 struct list_head *element;
733 struct ipw2100_tx_packet *packet;
737 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
738 command_types[cmd->host_command], cmd->host_command,
739 cmd->host_command_length);
740 printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters,
741 cmd->host_command_length);
743 spin_lock_irqsave(&priv->low_lock, flags);
745 if (priv->fatal_error) {
747 ("Attempt to send command while hardware in fatal error condition.\n");
752 if (!(priv->status & STATUS_RUNNING)) {
754 ("Attempt to send command while hardware is not running.\n");
759 if (priv->status & STATUS_CMD_ACTIVE) {
761 ("Attempt to send command while another command is pending.\n");
766 if (list_empty(&priv->msg_free_list)) {
767 IPW_DEBUG_INFO("no available msg buffers\n");
771 priv->status |= STATUS_CMD_ACTIVE;
772 priv->messages_sent++;
774 element = priv->msg_free_list.next;
776 packet = list_entry(element, struct ipw2100_tx_packet, list);
777 packet->jiffy_start = jiffies;
779 /* initialize the firmware command packet */
780 packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
781 packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
782 packet->info.c_struct.cmd->host_command_len_reg =
783 cmd->host_command_length;
784 packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
786 memcpy(packet->info.c_struct.cmd->host_command_params_reg,
787 cmd->host_command_parameters,
788 sizeof(packet->info.c_struct.cmd->host_command_params_reg));
791 DEC_STAT(&priv->msg_free_stat);
793 list_add_tail(element, &priv->msg_pend_list);
794 INC_STAT(&priv->msg_pend_stat);
796 ipw2100_tx_send_commands(priv);
797 ipw2100_tx_send_data(priv);
799 spin_unlock_irqrestore(&priv->low_lock, flags);
802 * We must wait for this command to complete before another
803 * command can be sent... but if we wait more than 3 seconds
804 * then there is a problem.
808 wait_event_interruptible_timeout(priv->wait_command_queue,
810 status & STATUS_CMD_ACTIVE),
811 HOST_COMPLETE_TIMEOUT);
814 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
815 1000 * (HOST_COMPLETE_TIMEOUT / HZ));
816 priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
817 priv->status &= ~STATUS_CMD_ACTIVE;
818 schedule_reset(priv);
822 if (priv->fatal_error) {
823 printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
824 priv->net_dev->name);
828 /* !!!!! HACK TEST !!!!!
829 * When lots of debug trace statements are enabled, the driver
830 * doesn't seem to have as many firmware restart cycles...
832 * As a test, we're sticking in a 1/100s delay here */
833 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
838 spin_unlock_irqrestore(&priv->low_lock, flags);
844 * Verify the values and data access of the hardware
845 * No locks needed or used. No functions called.
847 static int ipw2100_verify(struct ipw2100_priv *priv)
852 u32 val1 = 0x76543210;
853 u32 val2 = 0xFEDCBA98;
855 /* Domain 0 check - all values should be DOA_DEBUG */
856 for (address = IPW_REG_DOA_DEBUG_AREA_START;
857 address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) {
858 read_register(priv->net_dev, address, &data1);
859 if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
863 /* Domain 1 check - use arbitrary read/write compare */
864 for (address = 0; address < 5; address++) {
865 /* The memory area is not used now */
866 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
868 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
870 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
872 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
874 if (val1 == data1 && val2 == data2)
883 * Loop until the CARD_DISABLED bit is the same value as the
886 * TODO: See if it would be more efficient to do a wait/wake
887 * cycle and have the completion event trigger the wakeup
890 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
891 static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
895 u32 len = sizeof(card_state);
898 for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
899 err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
902 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
907 /* We'll break out if either the HW state says it is
908 * in the state we want, or if HOST_COMPLETE command
910 if ((card_state == state) ||
911 ((priv->status & STATUS_ENABLED) ?
912 IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
913 if (state == IPW_HW_STATE_ENABLED)
914 priv->status |= STATUS_ENABLED;
916 priv->status &= ~STATUS_ENABLED;
924 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
925 state ? "DISABLED" : "ENABLED");
929 /*********************************************************************
930 Procedure : sw_reset_and_clock
931 Purpose : Asserts s/w reset, asserts clock initialization
932 and waits for clock stabilization
933 ********************************************************************/
934 static int sw_reset_and_clock(struct ipw2100_priv *priv)
940 write_register(priv->net_dev, IPW_REG_RESET_REG,
941 IPW_AUX_HOST_RESET_REG_SW_RESET);
943 // wait for clock stabilization
944 for (i = 0; i < 1000; i++) {
945 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
947 // check clock ready bit
948 read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
949 if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
954 return -EIO; // TODO: better error value
956 /* set "initialization complete" bit to move adapter to
958 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
959 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
961 /* wait for clock stabilization */
962 for (i = 0; i < 10000; i++) {
963 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
965 /* check clock ready bit */
966 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
967 if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
972 return -EIO; /* TODO: better error value */
974 /* set D0 standby bit */
975 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
976 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
977 r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
982 /*********************************************************************
983 Procedure : ipw2100_download_firmware
984 Purpose : Initiaze adapter after power on.
986 1. assert s/w reset first!
987 2. awake clocks & wait for clock stabilization
988 3. hold ARC (don't ask me why...)
989 4. load Dino ucode and reset/clock init again
990 5. zero-out shared mem
992 *******************************************************************/
993 static int ipw2100_download_firmware(struct ipw2100_priv *priv)
999 /* Fetch the firmware and microcode */
1000 struct ipw2100_fw ipw2100_firmware;
1003 if (priv->fatal_error) {
1004 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
1005 "fatal error %d. Interface must be brought down.\n",
1006 priv->net_dev->name, priv->fatal_error);
1010 if (!ipw2100_firmware.version) {
1011 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
1013 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1014 priv->net_dev->name, err);
1015 priv->fatal_error = IPW2100_ERR_FW_LOAD;
1020 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
1022 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
1023 priv->net_dev->name, err);
1024 priv->fatal_error = IPW2100_ERR_FW_LOAD;
1028 priv->firmware_version = ipw2100_firmware.version;
1030 /* s/w reset and clock stabilization */
1031 err = sw_reset_and_clock(priv);
1033 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1034 priv->net_dev->name, err);
1038 err = ipw2100_verify(priv);
1040 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1041 priv->net_dev->name, err);
1046 write_nic_dword(priv->net_dev,
1047 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000);
1049 /* allow ARC to run */
1050 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1052 /* load microcode */
1053 err = ipw2100_ucode_download(priv, &ipw2100_firmware);
1055 printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
1056 priv->net_dev->name, err);
1061 write_nic_dword(priv->net_dev,
1062 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000);
1064 /* s/w reset and clock stabilization (again!!!) */
1065 err = sw_reset_and_clock(priv);
1067 printk(KERN_ERR DRV_NAME
1068 ": %s: sw_reset_and_clock failed: %d\n",
1069 priv->net_dev->name, err);
1074 err = ipw2100_fw_download(priv, &ipw2100_firmware);
1076 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1077 priv->net_dev->name, err);
1082 * When the .resume method of the driver is called, the other
1083 * part of the system, i.e. the ide driver could still stay in
1084 * the suspend stage. This prevents us from loading the firmware
1085 * from the disk. --YZ
1088 /* free any storage allocated for firmware image */
1089 ipw2100_release_firmware(priv, &ipw2100_firmware);
1092 /* zero out Domain 1 area indirectly (Si requirement) */
1093 for (address = IPW_HOST_FW_SHARED_AREA0;
1094 address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
1095 write_nic_dword(priv->net_dev, address, 0);
1096 for (address = IPW_HOST_FW_SHARED_AREA1;
1097 address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
1098 write_nic_dword(priv->net_dev, address, 0);
1099 for (address = IPW_HOST_FW_SHARED_AREA2;
1100 address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
1101 write_nic_dword(priv->net_dev, address, 0);
1102 for (address = IPW_HOST_FW_SHARED_AREA3;
1103 address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
1104 write_nic_dword(priv->net_dev, address, 0);
1105 for (address = IPW_HOST_FW_INTERRUPT_AREA;
1106 address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
1107 write_nic_dword(priv->net_dev, address, 0);
1112 ipw2100_release_firmware(priv, &ipw2100_firmware);
1116 static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
1118 if (priv->status & STATUS_INT_ENABLED)
1120 priv->status |= STATUS_INT_ENABLED;
1121 write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
1124 static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
1126 if (!(priv->status & STATUS_INT_ENABLED))
1128 priv->status &= ~STATUS_INT_ENABLED;
1129 write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
1132 static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
1134 struct ipw2100_ordinals *ord = &priv->ordinals;
1136 IPW_DEBUG_INFO("enter\n");
1138 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
1141 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
1144 read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
1145 read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
1147 ord->table2_size &= 0x0000FFFF;
1149 IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
1150 IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
1151 IPW_DEBUG_INFO("exit\n");
1154 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
1158 * Set GPIO 3 writable by FW; GPIO 1 writable
1159 * by driver and enable clock
1161 reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
1162 IPW_BIT_GPIO_LED_OFF);
1163 write_register(priv->net_dev, IPW_REG_GPIO, reg);
1166 static int rf_kill_active(struct ipw2100_priv *priv)
1168 #define MAX_RF_KILL_CHECKS 5
1169 #define RF_KILL_CHECK_DELAY 40
1171 unsigned short value = 0;
1175 if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
1176 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
1177 priv->status &= ~STATUS_RF_KILL_HW;
1181 for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
1182 udelay(RF_KILL_CHECK_DELAY);
1183 read_register(priv->net_dev, IPW_REG_GPIO, ®);
1184 value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
1188 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
1189 priv->status |= STATUS_RF_KILL_HW;
1191 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, false);
1192 priv->status &= ~STATUS_RF_KILL_HW;
1195 return (value == 0);
1198 static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
1204 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1207 if (ipw2100_get_ordinal
1208 (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) {
1209 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1214 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
1217 * EEPROM version is the byte at offset 0xfd in firmware
1218 * We read 4 bytes, then shift out the byte we actually want */
1219 read_nic_dword(priv->net_dev, addr + 0xFC, &val);
1220 priv->eeprom_version = (val >> 24) & 0xFF;
1221 IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
1224 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1226 * notice that the EEPROM bit is reverse polarity, i.e.
1227 * bit = 0 signifies HW RF kill switch is supported
1228 * bit = 1 signifies HW RF kill switch is NOT supported
1230 read_nic_dword(priv->net_dev, addr + 0x20, &val);
1231 if (!((val >> 24) & 0x01))
1232 priv->hw_features |= HW_FEATURE_RFKILL;
1234 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1235 (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not ");
1241 * Start firmware execution after power on and intialization
1244 * 2. Wait for f/w initialization completes;
1246 static int ipw2100_start_adapter(struct ipw2100_priv *priv)
1249 u32 inta, inta_mask, gpio;
1251 IPW_DEBUG_INFO("enter\n");
1253 if (priv->status & STATUS_RUNNING)
1257 * Initialize the hw - drive adapter to DO state by setting
1258 * init_done bit. Wait for clk_ready bit and Download
1261 if (ipw2100_download_firmware(priv)) {
1262 printk(KERN_ERR DRV_NAME
1263 ": %s: Failed to power on the adapter.\n",
1264 priv->net_dev->name);
1268 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1269 * in the firmware RBD and TBD ring queue */
1270 ipw2100_queues_initialize(priv);
1272 ipw2100_hw_set_gpio(priv);
1274 /* TODO -- Look at disabling interrupts here to make sure none
1275 * get fired during FW initialization */
1277 /* Release ARC - clear reset bit */
1278 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1280 /* wait for f/w intialization complete */
1281 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1284 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1285 /* Todo... wait for sync command ... */
1287 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1289 /* check "init done" bit */
1290 if (inta & IPW2100_INTA_FW_INIT_DONE) {
1291 /* reset "init done" bit */
1292 write_register(priv->net_dev, IPW_REG_INTA,
1293 IPW2100_INTA_FW_INIT_DONE);
1297 /* check error conditions : we check these after the firmware
1298 * check so that if there is an error, the interrupt handler
1299 * will see it and the adapter will be reset */
1301 (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
1302 /* clear error conditions */
1303 write_register(priv->net_dev, IPW_REG_INTA,
1304 IPW2100_INTA_FATAL_ERROR |
1305 IPW2100_INTA_PARITY_ERROR);
1309 /* Clear out any pending INTAs since we aren't supposed to have
1310 * interrupts enabled at this point... */
1311 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1312 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
1313 inta &= IPW_INTERRUPT_MASK;
1314 /* Clear out any pending interrupts */
1315 if (inta & inta_mask)
1316 write_register(priv->net_dev, IPW_REG_INTA, inta);
1318 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1319 i ? "SUCCESS" : "FAILED");
1322 printk(KERN_WARNING DRV_NAME
1323 ": %s: Firmware did not initialize.\n",
1324 priv->net_dev->name);
1328 /* allow firmware to write to GPIO1 & GPIO3 */
1329 read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
1331 gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
1333 write_register(priv->net_dev, IPW_REG_GPIO, gpio);
1335 /* Ready to receive commands */
1336 priv->status |= STATUS_RUNNING;
1338 /* The adapter has been reset; we are not associated */
1339 priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
1341 IPW_DEBUG_INFO("exit\n");
1346 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
1348 if (!priv->fatal_error)
1351 priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
1352 priv->fatal_index %= IPW2100_ERROR_QUEUE;
1353 priv->fatal_error = 0;
1356 /* NOTE: Our interrupt is disabled when this method is called */
1357 static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
1362 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1364 ipw2100_hw_set_gpio(priv);
1366 /* Step 1. Stop Master Assert */
1367 write_register(priv->net_dev, IPW_REG_RESET_REG,
1368 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1370 /* Step 2. Wait for stop Master Assert
1371 * (not more than 50us, otherwise ret error */
1374 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
1375 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1377 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1381 priv->status &= ~STATUS_RESET_PENDING;
1385 ("exit - waited too long for master assert stop\n");
1389 write_register(priv->net_dev, IPW_REG_RESET_REG,
1390 IPW_AUX_HOST_RESET_REG_SW_RESET);
1392 /* Reset any fatal_error conditions */
1393 ipw2100_reset_fatalerror(priv);
1395 /* At this point, the adapter is now stopped and disabled */
1396 priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
1397 STATUS_ASSOCIATED | STATUS_ENABLED);
1403 * Send the CARD_DISABLE_PHY_OFF command to the card to disable it
1405 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1407 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1408 * if STATUS_ASSN_LOST is sent.
1410 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1413 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1415 struct host_command cmd = {
1416 .host_command = CARD_DISABLE_PHY_OFF,
1417 .host_command_sequence = 0,
1418 .host_command_length = 0,
1423 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1425 /* Turn off the radio */
1426 err = ipw2100_hw_send_command(priv, &cmd);
1430 for (i = 0; i < 2500; i++) {
1431 read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
1432 read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
1434 if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
1435 (val2 & IPW2100_COMMAND_PHY_OFF))
1438 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
1444 static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
1446 struct host_command cmd = {
1447 .host_command = HOST_COMPLETE,
1448 .host_command_sequence = 0,
1449 .host_command_length = 0
1453 IPW_DEBUG_HC("HOST_COMPLETE\n");
1455 if (priv->status & STATUS_ENABLED)
1458 mutex_lock(&priv->adapter_mutex);
1460 if (rf_kill_active(priv)) {
1461 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1465 err = ipw2100_hw_send_command(priv, &cmd);
1467 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1471 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
1473 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1474 priv->net_dev->name);
1478 if (priv->stop_hang_check) {
1479 priv->stop_hang_check = 0;
1480 schedule_delayed_work(&priv->hang_check, HZ / 2);
1484 mutex_unlock(&priv->adapter_mutex);
1488 static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
1490 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1492 struct host_command cmd = {
1493 .host_command = HOST_PRE_POWER_DOWN,
1494 .host_command_sequence = 0,
1495 .host_command_length = 0,
1500 if (!(priv->status & STATUS_RUNNING))
1503 priv->status |= STATUS_STOPPING;
1505 /* We can only shut down the card if the firmware is operational. So,
1506 * if we haven't reset since a fatal_error, then we can not send the
1507 * shutdown commands. */
1508 if (!priv->fatal_error) {
1509 /* First, make sure the adapter is enabled so that the PHY_OFF
1510 * command can shut it down */
1511 ipw2100_enable_adapter(priv);
1513 err = ipw2100_hw_phy_off(priv);
1515 printk(KERN_WARNING DRV_NAME
1516 ": Error disabling radio %d\n", err);
1519 * If in D0-standby mode going directly to D3 may cause a
1520 * PCI bus violation. Therefore we must change out of the D0
1523 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1524 * hardware from going into standby mode and will transition
1525 * out of D0-standby if it is already in that state.
1527 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1528 * driver upon completion. Once received, the driver can
1529 * proceed to the D3 state.
1531 * Prepare for power down command to fw. This command would
1532 * take HW out of D0-standby and prepare it for D3 state.
1534 * Currently FW does not support event notification for this
1535 * event. Therefore, skip waiting for it. Just wait a fixed
1538 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1540 err = ipw2100_hw_send_command(priv, &cmd);
1542 printk(KERN_WARNING DRV_NAME ": "
1543 "%s: Power down command failed: Error %d\n",
1544 priv->net_dev->name, err);
1546 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
1549 priv->status &= ~STATUS_ENABLED;
1552 * Set GPIO 3 writable by FW; GPIO 1 writable
1553 * by driver and enable clock
1555 ipw2100_hw_set_gpio(priv);
1558 * Power down adapter. Sequence:
1559 * 1. Stop master assert (RESET_REG[9]=1)
1560 * 2. Wait for stop master (RESET_REG[8]==1)
1561 * 3. S/w reset assert (RESET_REG[7] = 1)
1564 /* Stop master assert */
1565 write_register(priv->net_dev, IPW_REG_RESET_REG,
1566 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1568 /* wait stop master not more than 50 usec.
1569 * Otherwise return error. */
1570 for (i = 5; i > 0; i--) {
1573 /* Check master stop bit */
1574 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1576 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1581 printk(KERN_WARNING DRV_NAME
1582 ": %s: Could now power down adapter.\n",
1583 priv->net_dev->name);
1585 /* assert s/w reset */
1586 write_register(priv->net_dev, IPW_REG_RESET_REG,
1587 IPW_AUX_HOST_RESET_REG_SW_RESET);
1589 priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
1594 static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
1596 struct host_command cmd = {
1597 .host_command = CARD_DISABLE,
1598 .host_command_sequence = 0,
1599 .host_command_length = 0
1603 IPW_DEBUG_HC("CARD_DISABLE\n");
1605 if (!(priv->status & STATUS_ENABLED))
1608 /* Make sure we clear the associated state */
1609 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1611 if (!priv->stop_hang_check) {
1612 priv->stop_hang_check = 1;
1613 cancel_delayed_work(&priv->hang_check);
1616 mutex_lock(&priv->adapter_mutex);
1618 err = ipw2100_hw_send_command(priv, &cmd);
1620 printk(KERN_WARNING DRV_NAME
1621 ": exit - failed to send CARD_DISABLE command\n");
1625 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
1627 printk(KERN_WARNING DRV_NAME
1628 ": exit - card failed to change to DISABLED\n");
1632 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1635 mutex_unlock(&priv->adapter_mutex);
1639 static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
1641 struct host_command cmd = {
1642 .host_command = SET_SCAN_OPTIONS,
1643 .host_command_sequence = 0,
1644 .host_command_length = 8
1648 IPW_DEBUG_INFO("enter\n");
1650 IPW_DEBUG_SCAN("setting scan options\n");
1652 cmd.host_command_parameters[0] = 0;
1654 if (!(priv->config & CFG_ASSOCIATE))
1655 cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
1656 if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled)
1657 cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
1658 if (priv->config & CFG_PASSIVE_SCAN)
1659 cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
1661 cmd.host_command_parameters[1] = priv->channel_mask;
1663 err = ipw2100_hw_send_command(priv, &cmd);
1665 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1666 cmd.host_command_parameters[0]);
1671 static int ipw2100_start_scan(struct ipw2100_priv *priv)
1673 struct host_command cmd = {
1674 .host_command = BROADCAST_SCAN,
1675 .host_command_sequence = 0,
1676 .host_command_length = 4
1680 IPW_DEBUG_HC("START_SCAN\n");
1682 cmd.host_command_parameters[0] = 0;
1684 /* No scanning if in monitor mode */
1685 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
1688 if (priv->status & STATUS_SCANNING) {
1689 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1693 IPW_DEBUG_INFO("enter\n");
1695 /* Not clearing here; doing so makes iwlist always return nothing...
1697 * We should modify the table logic to use aging tables vs. clearing
1698 * the table on each scan start.
1700 IPW_DEBUG_SCAN("starting scan\n");
1702 priv->status |= STATUS_SCANNING;
1703 err = ipw2100_hw_send_command(priv, &cmd);
1705 priv->status &= ~STATUS_SCANNING;
1707 IPW_DEBUG_INFO("exit\n");
1712 static const struct libipw_geo ipw_geos[] = {
1716 .bg = {{2412, 1}, {2417, 2}, {2422, 3},
1717 {2427, 4}, {2432, 5}, {2437, 6},
1718 {2442, 7}, {2447, 8}, {2452, 9},
1719 {2457, 10}, {2462, 11}, {2467, 12},
1720 {2472, 13}, {2484, 14}},
1724 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
1726 unsigned long flags;
1729 u32 ord_len = sizeof(lock);
1731 /* Age scan list entries found before suspend */
1732 if (priv->suspend_time) {
1733 libipw_networks_age(priv->ieee, priv->suspend_time);
1734 priv->suspend_time = 0;
1737 /* Quiet if manually disabled. */
1738 if (priv->status & STATUS_RF_KILL_SW) {
1739 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1740 "switch\n", priv->net_dev->name);
1744 /* the ipw2100 hardware really doesn't want power management delays
1745 * longer than 175usec
1747 pm_qos_update_request(&ipw2100_pm_qos_req, 175);
1749 /* If the interrupt is enabled, turn it off... */
1750 spin_lock_irqsave(&priv->low_lock, flags);
1751 ipw2100_disable_interrupts(priv);
1753 /* Reset any fatal_error conditions */
1754 ipw2100_reset_fatalerror(priv);
1755 spin_unlock_irqrestore(&priv->low_lock, flags);
1757 if (priv->status & STATUS_POWERED ||
1758 (priv->status & STATUS_RESET_PENDING)) {
1759 /* Power cycle the card ... */
1760 if (ipw2100_power_cycle_adapter(priv)) {
1761 printk(KERN_WARNING DRV_NAME
1762 ": %s: Could not cycle adapter.\n",
1763 priv->net_dev->name);
1768 priv->status |= STATUS_POWERED;
1770 /* Load the firmware, start the clocks, etc. */
1771 if (ipw2100_start_adapter(priv)) {
1772 printk(KERN_ERR DRV_NAME
1773 ": %s: Failed to start the firmware.\n",
1774 priv->net_dev->name);
1779 ipw2100_initialize_ordinals(priv);
1781 /* Determine capabilities of this particular HW configuration */
1782 if (ipw2100_get_hw_features(priv)) {
1783 printk(KERN_ERR DRV_NAME
1784 ": %s: Failed to determine HW features.\n",
1785 priv->net_dev->name);
1790 /* Initialize the geo */
1791 libipw_set_geo(priv->ieee, &ipw_geos[0]);
1792 priv->ieee->freq_band = LIBIPW_24GHZ_BAND;
1795 if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
1796 printk(KERN_ERR DRV_NAME
1797 ": %s: Failed to clear ordinal lock.\n",
1798 priv->net_dev->name);
1803 priv->status &= ~STATUS_SCANNING;
1805 if (rf_kill_active(priv)) {
1806 printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
1807 priv->net_dev->name);
1809 if (priv->stop_rf_kill) {
1810 priv->stop_rf_kill = 0;
1811 schedule_delayed_work(&priv->rf_kill,
1812 round_jiffies_relative(HZ));
1818 /* Turn on the interrupt so that commands can be processed */
1819 ipw2100_enable_interrupts(priv);
1821 /* Send all of the commands that must be sent prior to
1823 if (ipw2100_adapter_setup(priv)) {
1824 printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
1825 priv->net_dev->name);
1831 /* Enable the adapter - sends HOST_COMPLETE */
1832 if (ipw2100_enable_adapter(priv)) {
1833 printk(KERN_ERR DRV_NAME ": "
1834 "%s: failed in call to enable adapter.\n",
1835 priv->net_dev->name);
1836 ipw2100_hw_stop_adapter(priv);
1841 /* Start a scan . . . */
1842 ipw2100_set_scan_options(priv);
1843 ipw2100_start_scan(priv);
1850 static void ipw2100_down(struct ipw2100_priv *priv)
1852 unsigned long flags;
1853 union iwreq_data wrqu = {
1855 .sa_family = ARPHRD_ETHER}
1857 int associated = priv->status & STATUS_ASSOCIATED;
1859 /* Kill the RF switch timer */
1860 if (!priv->stop_rf_kill) {
1861 priv->stop_rf_kill = 1;
1862 cancel_delayed_work(&priv->rf_kill);
1865 /* Kill the firmware hang check timer */
1866 if (!priv->stop_hang_check) {
1867 priv->stop_hang_check = 1;
1868 cancel_delayed_work(&priv->hang_check);
1871 /* Kill any pending resets */
1872 if (priv->status & STATUS_RESET_PENDING)
1873 cancel_delayed_work(&priv->reset_work);
1875 /* Make sure the interrupt is on so that FW commands will be
1876 * processed correctly */
1877 spin_lock_irqsave(&priv->low_lock, flags);
1878 ipw2100_enable_interrupts(priv);
1879 spin_unlock_irqrestore(&priv->low_lock, flags);
1881 if (ipw2100_hw_stop_adapter(priv))
1882 printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
1883 priv->net_dev->name);
1885 /* Do not disable the interrupt until _after_ we disable
1886 * the adaptor. Otherwise the CARD_DISABLE command will never
1887 * be ack'd by the firmware */
1888 spin_lock_irqsave(&priv->low_lock, flags);
1889 ipw2100_disable_interrupts(priv);
1890 spin_unlock_irqrestore(&priv->low_lock, flags);
1892 pm_qos_update_request(&ipw2100_pm_qos_req, PM_QOS_DEFAULT_VALUE);
1894 /* We have to signal any supplicant if we are disassociating */
1896 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1898 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1899 netif_carrier_off(priv->net_dev);
1900 netif_stop_queue(priv->net_dev);
1903 static int ipw2100_wdev_init(struct net_device *dev)
1905 struct ipw2100_priv *priv = libipw_priv(dev);
1906 const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
1907 struct wireless_dev *wdev = &priv->ieee->wdev;
1910 memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
1912 /* fill-out priv->ieee->bg_band */
1913 if (geo->bg_channels) {
1914 struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band;
1916 bg_band->band = IEEE80211_BAND_2GHZ;
1917 bg_band->n_channels = geo->bg_channels;
1918 bg_band->channels = kcalloc(geo->bg_channels,
1919 sizeof(struct ieee80211_channel),
1921 if (!bg_band->channels) {
1925 /* translate geo->bg to bg_band.channels */
1926 for (i = 0; i < geo->bg_channels; i++) {
1927 bg_band->channels[i].band = IEEE80211_BAND_2GHZ;
1928 bg_band->channels[i].center_freq = geo->bg[i].freq;
1929 bg_band->channels[i].hw_value = geo->bg[i].channel;
1930 bg_band->channels[i].max_power = geo->bg[i].max_power;
1931 if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY)
1932 bg_band->channels[i].flags |=
1933 IEEE80211_CHAN_PASSIVE_SCAN;
1934 if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS)
1935 bg_band->channels[i].flags |=
1936 IEEE80211_CHAN_NO_IBSS;
1937 if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT)
1938 bg_band->channels[i].flags |=
1939 IEEE80211_CHAN_RADAR;
1940 /* No equivalent for LIBIPW_CH_80211H_RULES,
1941 LIBIPW_CH_UNIFORM_SPREADING, or
1942 LIBIPW_CH_B_ONLY... */
1944 /* point at bitrate info */
1945 bg_band->bitrates = ipw2100_bg_rates;
1946 bg_band->n_bitrates = RATE_COUNT;
1948 wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band;
1951 wdev->wiphy->cipher_suites = ipw_cipher_suites;
1952 wdev->wiphy->n_cipher_suites = ARRAY_SIZE(ipw_cipher_suites);
1954 set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
1955 if (wiphy_register(wdev->wiphy))
1960 static void ipw2100_reset_adapter(struct work_struct *work)
1962 struct ipw2100_priv *priv =
1963 container_of(work, struct ipw2100_priv, reset_work.work);
1964 unsigned long flags;
1965 union iwreq_data wrqu = {
1967 .sa_family = ARPHRD_ETHER}
1969 int associated = priv->status & STATUS_ASSOCIATED;
1971 spin_lock_irqsave(&priv->low_lock, flags);
1972 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name);
1974 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1975 priv->status |= STATUS_SECURITY_UPDATED;
1977 /* Force a power cycle even if interface hasn't been opened
1979 cancel_delayed_work(&priv->reset_work);
1980 priv->status |= STATUS_RESET_PENDING;
1981 spin_unlock_irqrestore(&priv->low_lock, flags);
1983 mutex_lock(&priv->action_mutex);
1984 /* stop timed checks so that they don't interfere with reset */
1985 priv->stop_hang_check = 1;
1986 cancel_delayed_work(&priv->hang_check);
1988 /* We have to signal any supplicant if we are disassociating */
1990 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1992 ipw2100_up(priv, 0);
1993 mutex_unlock(&priv->action_mutex);
1997 static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
2000 #define MAC_ASSOCIATION_READ_DELAY (HZ)
2002 unsigned int len, essid_len;
2003 char essid[IW_ESSID_MAX_SIZE];
2008 DECLARE_SSID_BUF(ssid);
2011 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
2012 * an actual MAC of the AP. Seems like FW sets this
2013 * address too late. Read it later and expose through
2014 * /proc or schedule a later task to query and update
2017 essid_len = IW_ESSID_MAX_SIZE;
2018 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
2021 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2027 ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len);
2029 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2035 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
2037 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2042 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, bssid,
2045 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
2049 memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
2052 case TX_RATE_1_MBIT:
2053 txratename = "1Mbps";
2055 case TX_RATE_2_MBIT:
2056 txratename = "2Mbsp";
2058 case TX_RATE_5_5_MBIT:
2059 txratename = "5.5Mbps";
2061 case TX_RATE_11_MBIT:
2062 txratename = "11Mbps";
2065 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
2066 txratename = "unknown rate";
2070 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID=%pM)\n",
2071 priv->net_dev->name, print_ssid(ssid, essid, essid_len),
2072 txratename, chan, bssid);
2074 /* now we copy read ssid into dev */
2075 if (!(priv->config & CFG_STATIC_ESSID)) {
2076 priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE);
2077 memcpy(priv->essid, essid, priv->essid_len);
2079 priv->channel = chan;
2080 memcpy(priv->bssid, bssid, ETH_ALEN);
2082 priv->status |= STATUS_ASSOCIATING;
2083 priv->connect_start = get_seconds();
2085 schedule_delayed_work(&priv->wx_event_work, HZ / 10);
2088 static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
2089 int length, int batch_mode)
2091 int ssid_len = min(length, IW_ESSID_MAX_SIZE);
2092 struct host_command cmd = {
2093 .host_command = SSID,
2094 .host_command_sequence = 0,
2095 .host_command_length = ssid_len
2098 DECLARE_SSID_BUF(ssid);
2100 IPW_DEBUG_HC("SSID: '%s'\n", print_ssid(ssid, essid, ssid_len));
2103 memcpy(cmd.host_command_parameters, essid, ssid_len);
2106 err = ipw2100_disable_adapter(priv);
2111 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2112 * disable auto association -- so we cheat by setting a bogus SSID */
2113 if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
2115 u8 *bogus = (u8 *) cmd.host_command_parameters;
2116 for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
2117 bogus[i] = 0x18 + i;
2118 cmd.host_command_length = IW_ESSID_MAX_SIZE;
2121 /* NOTE: We always send the SSID command even if the provided ESSID is
2122 * the same as what we currently think is set. */
2124 err = ipw2100_hw_send_command(priv, &cmd);
2126 memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len);
2127 memcpy(priv->essid, essid, ssid_len);
2128 priv->essid_len = ssid_len;
2132 if (ipw2100_enable_adapter(priv))
2139 static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
2141 DECLARE_SSID_BUF(ssid);
2143 IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
2144 "disassociated: '%s' %pM\n",
2145 print_ssid(ssid, priv->essid, priv->essid_len),
2148 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
2150 if (priv->status & STATUS_STOPPING) {
2151 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2155 memset(priv->bssid, 0, ETH_ALEN);
2156 memset(priv->ieee->bssid, 0, ETH_ALEN);
2158 netif_carrier_off(priv->net_dev);
2159 netif_stop_queue(priv->net_dev);
2161 if (!(priv->status & STATUS_RUNNING))
2164 if (priv->status & STATUS_SECURITY_UPDATED)
2165 schedule_delayed_work(&priv->security_work, 0);
2167 schedule_delayed_work(&priv->wx_event_work, 0);
2170 static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
2172 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2173 priv->net_dev->name);
2175 /* RF_KILL is now enabled (else we wouldn't be here) */
2176 wiphy_rfkill_set_hw_state(priv->ieee->wdev.wiphy, true);
2177 priv->status |= STATUS_RF_KILL_HW;
2179 /* Make sure the RF Kill check timer is running */
2180 priv->stop_rf_kill = 0;
2181 mod_delayed_work(system_wq, &priv->rf_kill, round_jiffies_relative(HZ));
2184 static void send_scan_event(void *data)
2186 struct ipw2100_priv *priv = data;
2187 union iwreq_data wrqu;
2189 wrqu.data.length = 0;
2190 wrqu.data.flags = 0;
2191 wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL);
2194 static void ipw2100_scan_event_later(struct work_struct *work)
2196 send_scan_event(container_of(work, struct ipw2100_priv,
2197 scan_event_later.work));
2200 static void ipw2100_scan_event_now(struct work_struct *work)
2202 send_scan_event(container_of(work, struct ipw2100_priv,
2206 static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
2208 IPW_DEBUG_SCAN("scan complete\n");
2209 /* Age the scan results... */
2210 priv->ieee->scans++;
2211 priv->status &= ~STATUS_SCANNING;
2213 /* Only userspace-requested scan completion events go out immediately */
2214 if (!priv->user_requested_scan) {
2215 if (!delayed_work_pending(&priv->scan_event_later))
2216 schedule_delayed_work(&priv->scan_event_later,
2217 round_jiffies_relative(msecs_to_jiffies(4000)));
2219 priv->user_requested_scan = 0;
2220 cancel_delayed_work(&priv->scan_event_later);
2221 schedule_work(&priv->scan_event_now);
2225 #ifdef CONFIG_IPW2100_DEBUG
2226 #define IPW2100_HANDLER(v, f) { v, f, # v }
2227 struct ipw2100_status_indicator {
2229 void (*cb) (struct ipw2100_priv * priv, u32 status);
2233 #define IPW2100_HANDLER(v, f) { v, f }
2234 struct ipw2100_status_indicator {
2236 void (*cb) (struct ipw2100_priv * priv, u32 status);
2238 #endif /* CONFIG_IPW2100_DEBUG */
2240 static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
2242 IPW_DEBUG_SCAN("Scanning...\n");
2243 priv->status |= STATUS_SCANNING;
2246 static const struct ipw2100_status_indicator status_handlers[] = {
2247 IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
2248 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
2249 IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
2250 IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
2251 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
2252 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
2253 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
2254 IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
2255 IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
2256 IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
2257 IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
2258 IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
2259 IPW2100_HANDLER(-1, NULL)
2262 static void isr_status_change(struct ipw2100_priv *priv, int status)
2266 if (status == IPW_STATE_SCANNING &&
2267 priv->status & STATUS_ASSOCIATED &&
2268 !(priv->status & STATUS_SCANNING)) {
2269 IPW_DEBUG_INFO("Scan detected while associated, with "
2270 "no scan request. Restarting firmware.\n");
2272 /* Wake up any sleeping jobs */
2273 schedule_reset(priv);
2276 for (i = 0; status_handlers[i].status != -1; i++) {
2277 if (status == status_handlers[i].status) {
2278 IPW_DEBUG_NOTIF("Status change: %s\n",
2279 status_handlers[i].name);
2280 if (status_handlers[i].cb)
2281 status_handlers[i].cb(priv, status);
2282 priv->wstats.status = status;
2287 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
2290 static void isr_rx_complete_command(struct ipw2100_priv *priv,
2291 struct ipw2100_cmd_header *cmd)
2293 #ifdef CONFIG_IPW2100_DEBUG
2294 if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
2295 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2296 command_types[cmd->host_command_reg],
2297 cmd->host_command_reg);
2300 if (cmd->host_command_reg == HOST_COMPLETE)
2301 priv->status |= STATUS_ENABLED;
2303 if (cmd->host_command_reg == CARD_DISABLE)
2304 priv->status &= ~STATUS_ENABLED;
2306 priv->status &= ~STATUS_CMD_ACTIVE;
2308 wake_up_interruptible(&priv->wait_command_queue);
2311 #ifdef CONFIG_IPW2100_DEBUG
2312 static const char *frame_types[] = {
2313 "COMMAND_STATUS_VAL",
2314 "STATUS_CHANGE_VAL",
2317 "HOST_NOTIFICATION_VAL"
2321 static int ipw2100_alloc_skb(struct ipw2100_priv *priv,
2322 struct ipw2100_rx_packet *packet)
2324 packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
2328 packet->rxp = (struct ipw2100_rx *)packet->skb->data;
2329 packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
2330 sizeof(struct ipw2100_rx),
2331 PCI_DMA_FROMDEVICE);
2332 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2338 #define SEARCH_ERROR 0xffffffff
2339 #define SEARCH_FAIL 0xfffffffe
2340 #define SEARCH_SUCCESS 0xfffffff0
2341 #define SEARCH_DISCARD 0
2342 #define SEARCH_SNAPSHOT 1
2344 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2345 static void ipw2100_snapshot_free(struct ipw2100_priv *priv)
2348 if (!priv->snapshot[0])
2350 for (i = 0; i < 0x30; i++)
2351 kfree(priv->snapshot[i]);
2352 priv->snapshot[0] = NULL;
2355 #ifdef IPW2100_DEBUG_C3
2356 static int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
2359 if (priv->snapshot[0])
2361 for (i = 0; i < 0x30; i++) {
2362 priv->snapshot[i] = kmalloc(0x1000, GFP_ATOMIC);
2363 if (!priv->snapshot[i]) {
2364 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2365 "buffer %d\n", priv->net_dev->name, i);
2367 kfree(priv->snapshot[--i]);
2368 priv->snapshot[0] = NULL;
2376 static u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
2377 size_t len, int mode)
2385 if (mode == SEARCH_SNAPSHOT) {
2386 if (!ipw2100_snapshot_alloc(priv))
2387 mode = SEARCH_DISCARD;
2390 for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
2391 read_nic_dword(priv->net_dev, i, &tmp);
2392 if (mode == SEARCH_SNAPSHOT)
2393 *(u32 *) SNAPSHOT_ADDR(i) = tmp;
2394 if (ret == SEARCH_FAIL) {
2396 for (j = 0; j < 4; j++) {
2405 if ((s - in_buf) == len)
2406 ret = (i + j) - len + 1;
2408 } else if (mode == SEARCH_DISCARD)
2418 * 0) Disconnect the SKB from the firmware (just unmap)
2419 * 1) Pack the ETH header into the SKB
2420 * 2) Pass the SKB to the network stack
2422 * When packet is provided by the firmware, it contains the following:
2427 * The size of the constructed ethernet
2430 #ifdef IPW2100_RX_DEBUG
2431 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
2434 static void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
2436 #ifdef IPW2100_DEBUG_C3
2437 struct ipw2100_status *status = &priv->status_queue.drv[i];
2442 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2443 i * sizeof(struct ipw2100_status));
2445 #ifdef IPW2100_DEBUG_C3
2446 /* Halt the firmware so we can get a good image */
2447 write_register(priv->net_dev, IPW_REG_RESET_REG,
2448 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
2451 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
2452 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
2454 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
2458 match = ipw2100_match_buf(priv, (u8 *) status,
2459 sizeof(struct ipw2100_status),
2461 if (match < SEARCH_SUCCESS)
2462 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2463 "offset 0x%06X, length %d:\n",
2464 priv->net_dev->name, match,
2465 sizeof(struct ipw2100_status));
2467 IPW_DEBUG_INFO("%s: No DMA status match in "
2468 "Firmware.\n", priv->net_dev->name);
2470 printk_buf((u8 *) priv->status_queue.drv,
2471 sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
2474 priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
2475 priv->net_dev->stats.rx_errors++;
2476 schedule_reset(priv);
2479 static void isr_rx(struct ipw2100_priv *priv, int i,
2480 struct libipw_rx_stats *stats)
2482 struct net_device *dev = priv->net_dev;
2483 struct ipw2100_status *status = &priv->status_queue.drv[i];
2484 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2486 IPW_DEBUG_RX("Handler...\n");
2488 if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
2489 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2492 status->frame_size, skb_tailroom(packet->skb));
2493 dev->stats.rx_errors++;
2497 if (unlikely(!netif_running(dev))) {
2498 dev->stats.rx_errors++;
2499 priv->wstats.discard.misc++;
2500 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2504 if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
2505 !(priv->status & STATUS_ASSOCIATED))) {
2506 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2507 priv->wstats.discard.misc++;
2511 pci_unmap_single(priv->pci_dev,
2513 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2515 skb_put(packet->skb, status->frame_size);
2517 #ifdef IPW2100_RX_DEBUG
2518 /* Make a copy of the frame so we can dump it to the logs if
2519 * libipw_rx fails */
2520 skb_copy_from_linear_data(packet->skb, packet_data,
2521 min_t(u32, status->frame_size,
2522 IPW_RX_NIC_BUFFER_LENGTH));
2525 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2526 #ifdef IPW2100_RX_DEBUG
2527 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2529 printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
2531 dev->stats.rx_errors++;
2533 /* libipw_rx failed, so it didn't free the SKB */
2534 dev_kfree_skb_any(packet->skb);
2538 /* We need to allocate a new SKB and attach it to the RDB. */
2539 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2540 printk(KERN_WARNING DRV_NAME ": "
2541 "%s: Unable to allocate SKB onto RBD ring - disabling "
2542 "adapter.\n", dev->name);
2543 /* TODO: schedule adapter shutdown */
2544 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2547 /* Update the RDB entry */
2548 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2551 #ifdef CONFIG_IPW2100_MONITOR
2553 static void isr_rx_monitor(struct ipw2100_priv *priv, int i,
2554 struct libipw_rx_stats *stats)
2556 struct net_device *dev = priv->net_dev;
2557 struct ipw2100_status *status = &priv->status_queue.drv[i];
2558 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2560 /* Magic struct that slots into the radiotap header -- no reason
2561 * to build this manually element by element, we can write it much
2562 * more efficiently than we can parse it. ORDER MATTERS HERE */
2564 struct ieee80211_radiotap_header rt_hdr;
2565 s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
2568 IPW_DEBUG_RX("Handler...\n");
2570 if (unlikely(status->frame_size > skb_tailroom(packet->skb) -
2571 sizeof(struct ipw_rt_hdr))) {
2572 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2576 skb_tailroom(packet->skb));
2577 dev->stats.rx_errors++;
2581 if (unlikely(!netif_running(dev))) {
2582 dev->stats.rx_errors++;
2583 priv->wstats.discard.misc++;
2584 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2588 if (unlikely(priv->config & CFG_CRC_CHECK &&
2589 status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
2590 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2591 dev->stats.rx_errors++;
2595 pci_unmap_single(priv->pci_dev, packet->dma_addr,
2596 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2597 memmove(packet->skb->data + sizeof(struct ipw_rt_hdr),
2598 packet->skb->data, status->frame_size);
2600 ipw_rt = (struct ipw_rt_hdr *) packet->skb->data;
2602 ipw_rt->rt_hdr.it_version = PKTHDR_RADIOTAP_VERSION;
2603 ipw_rt->rt_hdr.it_pad = 0; /* always good to zero */
2604 ipw_rt->rt_hdr.it_len = cpu_to_le16(sizeof(struct ipw_rt_hdr)); /* total hdr+data */
2606 ipw_rt->rt_hdr.it_present = cpu_to_le32(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL);
2608 ipw_rt->rt_dbmsignal = status->rssi + IPW2100_RSSI_TO_DBM;
2610 skb_put(packet->skb, status->frame_size + sizeof(struct ipw_rt_hdr));
2612 if (!libipw_rx(priv->ieee, packet->skb, stats)) {
2613 dev->stats.rx_errors++;
2615 /* libipw_rx failed, so it didn't free the SKB */
2616 dev_kfree_skb_any(packet->skb);
2620 /* We need to allocate a new SKB and attach it to the RDB. */
2621 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2623 "%s: Unable to allocate SKB onto RBD ring - disabling "
2624 "adapter.\n", dev->name);
2625 /* TODO: schedule adapter shutdown */
2626 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2629 /* Update the RDB entry */
2630 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2635 static int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
2637 struct ipw2100_status *status = &priv->status_queue.drv[i];
2638 struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
2639 u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
2641 switch (frame_type) {
2642 case COMMAND_STATUS_VAL:
2643 return (status->frame_size != sizeof(u->rx_data.command));
2644 case STATUS_CHANGE_VAL:
2645 return (status->frame_size != sizeof(u->rx_data.status));
2646 case HOST_NOTIFICATION_VAL:
2647 return (status->frame_size < sizeof(u->rx_data.notification));
2648 case P80211_DATA_VAL:
2649 case P8023_DATA_VAL:
2650 #ifdef CONFIG_IPW2100_MONITOR
2653 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2654 case IEEE80211_FTYPE_MGMT:
2655 case IEEE80211_FTYPE_CTL:
2657 case IEEE80211_FTYPE_DATA:
2658 return (status->frame_size >
2659 IPW_MAX_802_11_PAYLOAD_LENGTH);
2668 * ipw2100 interrupts are disabled at this point, and the ISR
2669 * is the only code that calls this method. So, we do not need
2670 * to play with any locks.
2672 * RX Queue works as follows:
2674 * Read index - firmware places packet in entry identified by the
2675 * Read index and advances Read index. In this manner,
2676 * Read index will always point to the next packet to
2677 * be filled--but not yet valid.
2679 * Write index - driver fills this entry with an unused RBD entry.
2680 * This entry has not filled by the firmware yet.
2682 * In between the W and R indexes are the RBDs that have been received
2683 * but not yet processed.
2685 * The process of handling packets will start at WRITE + 1 and advance
2686 * until it reaches the READ index.
2688 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2691 static void __ipw2100_rx_process(struct ipw2100_priv *priv)
2693 struct ipw2100_bd_queue *rxq = &priv->rx_queue;
2694 struct ipw2100_status_queue *sq = &priv->status_queue;
2695 struct ipw2100_rx_packet *packet;
2698 struct ipw2100_rx *u;
2699 struct libipw_rx_stats stats = {
2700 .mac_time = jiffies,
2703 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
2704 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
2706 if (r >= rxq->entries) {
2707 IPW_DEBUG_RX("exit - bad read index\n");
2711 i = (rxq->next + 1) % rxq->entries;
2714 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2715 r, rxq->next, i); */
2717 packet = &priv->rx_buffers[i];
2719 /* Sync the DMA for the RX buffer so CPU is sure to get
2720 * the correct values */
2721 pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
2722 sizeof(struct ipw2100_rx),
2723 PCI_DMA_FROMDEVICE);
2725 if (unlikely(ipw2100_corruption_check(priv, i))) {
2726 ipw2100_corruption_detected(priv, i);
2731 frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK;
2732 stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
2733 stats.len = sq->drv[i].frame_size;
2736 if (stats.rssi != 0)
2737 stats.mask |= LIBIPW_STATMASK_RSSI;
2738 stats.freq = LIBIPW_24GHZ_BAND;
2740 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2741 priv->net_dev->name, frame_types[frame_type],
2744 switch (frame_type) {
2745 case COMMAND_STATUS_VAL:
2746 /* Reset Rx watchdog */
2747 isr_rx_complete_command(priv, &u->rx_data.command);
2750 case STATUS_CHANGE_VAL:
2751 isr_status_change(priv, u->rx_data.status);
2754 case P80211_DATA_VAL:
2755 case P8023_DATA_VAL:
2756 #ifdef CONFIG_IPW2100_MONITOR
2757 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
2758 isr_rx_monitor(priv, i, &stats);
2762 if (stats.len < sizeof(struct libipw_hdr_3addr))
2764 switch (WLAN_FC_GET_TYPE(le16_to_cpu(u->rx_data.header.frame_ctl))) {
2765 case IEEE80211_FTYPE_MGMT:
2766 libipw_rx_mgt(priv->ieee,
2767 &u->rx_data.header, &stats);
2770 case IEEE80211_FTYPE_CTL:
2773 case IEEE80211_FTYPE_DATA:
2774 isr_rx(priv, i, &stats);
2782 /* clear status field associated with this RBD */
2783 rxq->drv[i].status.info.field = 0;
2785 i = (i + 1) % rxq->entries;
2789 /* backtrack one entry, wrapping to end if at 0 */
2790 rxq->next = (i ? i : rxq->entries) - 1;
2792 write_register(priv->net_dev,
2793 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next);
2798 * __ipw2100_tx_process
2800 * This routine will determine whether the next packet on
2801 * the fw_pend_list has been processed by the firmware yet.
2803 * If not, then it does nothing and returns.
2805 * If so, then it removes the item from the fw_pend_list, frees
2806 * any associated storage, and places the item back on the
2807 * free list of its source (either msg_free_list or tx_free_list)
2809 * TX Queue works as follows:
2811 * Read index - points to the next TBD that the firmware will
2812 * process. The firmware will read the data, and once
2813 * done processing, it will advance the Read index.
2815 * Write index - driver fills this entry with an constructed TBD
2816 * entry. The Write index is not advanced until the
2817 * packet has been configured.
2819 * In between the W and R indexes are the TBDs that have NOT been
2820 * processed. Lagging behind the R index are packets that have
2821 * been processed but have not been freed by the driver.
2823 * In order to free old storage, an internal index will be maintained
2824 * that points to the next packet to be freed. When all used
2825 * packets have been freed, the oldest index will be the same as the
2826 * firmware's read index.
2828 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2830 * Because the TBD structure can not contain arbitrary data, the
2831 * driver must keep an internal queue of cached allocations such that
2832 * it can put that data back into the tx_free_list and msg_free_list
2833 * for use by future command and data packets.
2836 static int __ipw2100_tx_process(struct ipw2100_priv *priv)
2838 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2839 struct ipw2100_bd *tbd;
2840 struct list_head *element;
2841 struct ipw2100_tx_packet *packet;
2842 int descriptors_used;
2844 u32 r, w, frag_num = 0;
2846 if (list_empty(&priv->fw_pend_list))
2849 element = priv->fw_pend_list.next;
2851 packet = list_entry(element, struct ipw2100_tx_packet, list);
2852 tbd = &txq->drv[packet->index];
2854 /* Determine how many TBD entries must be finished... */
2855 switch (packet->type) {
2857 /* COMMAND uses only one slot; don't advance */
2858 descriptors_used = 1;
2863 /* DATA uses two slots; advance and loop position. */
2864 descriptors_used = tbd->num_fragments;
2865 frag_num = tbd->num_fragments - 1;
2866 e = txq->oldest + frag_num;
2871 printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
2872 priv->net_dev->name);
2876 /* if the last TBD is not done by NIC yet, then packet is
2877 * not ready to be released.
2880 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
2882 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2885 printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
2886 priv->net_dev->name);
2889 * txq->next is the index of the last packet written txq->oldest is
2890 * the index of the r is the index of the next packet to be read by
2895 * Quick graphic to help you visualize the following
2896 * if / else statement
2898 * ===>| s---->|===============
2900 * | a | b | c | d | e | f | g | h | i | j | k | l
2904 * w - updated by driver
2905 * r - updated by firmware
2906 * s - start of oldest BD entry (txq->oldest)
2907 * e - end of oldest BD entry
2910 if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
2911 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2916 DEC_STAT(&priv->fw_pend_stat);
2918 #ifdef CONFIG_IPW2100_DEBUG
2921 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2923 (u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
2924 txq->drv[i].host_addr, txq->drv[i].buf_length);
2926 if (packet->type == DATA) {
2927 i = (i + 1) % txq->entries;
2929 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2931 (u32) (txq->nic + i *
2932 sizeof(struct ipw2100_bd)),
2933 (u32) txq->drv[i].host_addr,
2934 txq->drv[i].buf_length);
2939 switch (packet->type) {
2941 if (txq->drv[txq->oldest].status.info.fields.txType != 0)
2942 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2943 "Expecting DATA TBD but pulled "
2944 "something else: ids %d=%d.\n",
2945 priv->net_dev->name, txq->oldest, packet->index);
2947 /* DATA packet; we have to unmap and free the SKB */
2948 for (i = 0; i < frag_num; i++) {
2949 tbd = &txq->drv[(packet->index + 1 + i) % txq->entries];
2951 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2952 (packet->index + 1 + i) % txq->entries,
2953 tbd->host_addr, tbd->buf_length);
2955 pci_unmap_single(priv->pci_dev,
2957 tbd->buf_length, PCI_DMA_TODEVICE);
2960 libipw_txb_free(packet->info.d_struct.txb);
2961 packet->info.d_struct.txb = NULL;
2963 list_add_tail(element, &priv->tx_free_list);
2964 INC_STAT(&priv->tx_free_stat);
2966 /* We have a free slot in the Tx queue, so wake up the
2967 * transmit layer if it is stopped. */
2968 if (priv->status & STATUS_ASSOCIATED)
2969 netif_wake_queue(priv->net_dev);
2971 /* A packet was processed by the hardware, so update the
2973 priv->net_dev->trans_start = jiffies;
2978 if (txq->drv[txq->oldest].status.info.fields.txType != 1)
2979 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2980 "Expecting COMMAND TBD but pulled "
2981 "something else: ids %d=%d.\n",
2982 priv->net_dev->name, txq->oldest, packet->index);
2984 #ifdef CONFIG_IPW2100_DEBUG
2985 if (packet->info.c_struct.cmd->host_command_reg <
2986 ARRAY_SIZE(command_types))
2987 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2988 command_types[packet->info.c_struct.cmd->
2990 packet->info.c_struct.cmd->
2992 packet->info.c_struct.cmd->cmd_status_reg);
2995 list_add_tail(element, &priv->msg_free_list);
2996 INC_STAT(&priv->msg_free_stat);
3000 /* advance oldest used TBD pointer to start of next entry */
3001 txq->oldest = (e + 1) % txq->entries;
3002 /* increase available TBDs number */
3003 txq->available += descriptors_used;
3004 SET_STAT(&priv->txq_stat, txq->available);
3006 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
3007 jiffies - packet->jiffy_start);
3009 return (!list_empty(&priv->fw_pend_list));
3012 static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
3016 while (__ipw2100_tx_process(priv) && i < 200)
3020 printk(KERN_WARNING DRV_NAME ": "
3021 "%s: Driver is running slow (%d iters).\n",
3022 priv->net_dev->name, i);
3026 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
3028 struct list_head *element;
3029 struct ipw2100_tx_packet *packet;
3030 struct ipw2100_bd_queue *txq = &priv->tx_queue;
3031 struct ipw2100_bd *tbd;
3032 int next = txq->next;
3034 while (!list_empty(&priv->msg_pend_list)) {
3035 /* if there isn't enough space in TBD queue, then
3036 * don't stuff a new one in.
3037 * NOTE: 3 are needed as a command will take one,
3038 * and there is a minimum of 2 that must be
3039 * maintained between the r and w indexes
3041 if (txq->available <= 3) {
3042 IPW_DEBUG_TX("no room in tx_queue\n");
3046 element = priv->msg_pend_list.next;
3048 DEC_STAT(&priv->msg_pend_stat);
3050 packet = list_entry(element, struct ipw2100_tx_packet, list);
3052 IPW_DEBUG_TX("using TBD at virt=%p, phys=%04X\n",
3053 &txq->drv[txq->next],
3054 (u32) (txq->nic + txq->next *
3055 sizeof(struct ipw2100_bd)));
3057 packet->index = txq->next;
3059 tbd = &txq->drv[txq->next];
3061 /* initialize TBD */
3062 tbd->host_addr = packet->info.c_struct.cmd_phys;
3063 tbd->buf_length = sizeof(struct ipw2100_cmd_header);
3064 /* not marking number of fragments causes problems
3065 * with f/w debug version */
3066 tbd->num_fragments = 1;
3067 tbd->status.info.field =
3068 IPW_BD_STATUS_TX_FRAME_COMMAND |
3069 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3071 /* update TBD queue counters */
3073 txq->next %= txq->entries;
3075 DEC_STAT(&priv->txq_stat);
3077 list_add_tail(element, &priv->fw_pend_list);
3078 INC_STAT(&priv->fw_pend_stat);
3081 if (txq->next != next) {
3082 /* kick off the DMA by notifying firmware the
3083 * write index has moved; make sure TBD stores are sync'd */
3085 write_register(priv->net_dev,
3086 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3092 * ipw2100_tx_send_data
3095 static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
3097 struct list_head *element;
3098 struct ipw2100_tx_packet *packet;
3099 struct ipw2100_bd_queue *txq = &priv->tx_queue;
3100 struct ipw2100_bd *tbd;
3101 int next = txq->next;
3103 struct ipw2100_data_header *ipw_hdr;
3104 struct libipw_hdr_3addr *hdr;
3106 while (!list_empty(&priv->tx_pend_list)) {
3107 /* if there isn't enough space in TBD queue, then
3108 * don't stuff a new one in.
3109 * NOTE: 4 are needed as a data will take two,
3110 * and there is a minimum of 2 that must be
3111 * maintained between the r and w indexes
3113 element = priv->tx_pend_list.next;
3114 packet = list_entry(element, struct ipw2100_tx_packet, list);
3116 if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
3118 /* TODO: Support merging buffers if more than
3119 * IPW_MAX_BDS are used */
3120 IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded. "
3121 "Increase fragmentation level.\n",
3122 priv->net_dev->name);
3125 if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) {
3126 IPW_DEBUG_TX("no room in tx_queue\n");
3131 DEC_STAT(&priv->tx_pend_stat);
3133 tbd = &txq->drv[txq->next];
3135 packet->index = txq->next;
3137 ipw_hdr = packet->info.d_struct.data;
3138 hdr = (struct libipw_hdr_3addr *)packet->info.d_struct.txb->
3141 if (priv->ieee->iw_mode == IW_MODE_INFRA) {
3142 /* To DS: Addr1 = BSSID, Addr2 = SA,
3144 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3145 memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
3146 } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
3147 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3149 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3150 memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
3153 ipw_hdr->host_command_reg = SEND;
3154 ipw_hdr->host_command_reg1 = 0;
3156 /* For now we only support host based encryption */
3157 ipw_hdr->needs_encryption = 0;
3158 ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
3159 if (packet->info.d_struct.txb->nr_frags > 1)
3160 ipw_hdr->fragment_size =
3161 packet->info.d_struct.txb->frag_size -
3164 ipw_hdr->fragment_size = 0;
3166 tbd->host_addr = packet->info.d_struct.data_phys;
3167 tbd->buf_length = sizeof(struct ipw2100_data_header);
3168 tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
3169 tbd->status.info.field =
3170 IPW_BD_STATUS_TX_FRAME_802_3 |
3171 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3173 txq->next %= txq->entries;
3175 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
3176 packet->index, tbd->host_addr, tbd->buf_length);
3177 #ifdef CONFIG_IPW2100_DEBUG
3178 if (packet->info.d_struct.txb->nr_frags > 1)
3179 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3180 packet->info.d_struct.txb->nr_frags);
3183 for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
3184 tbd = &txq->drv[txq->next];
3185 if (i == packet->info.d_struct.txb->nr_frags - 1)
3186 tbd->status.info.field =
3187 IPW_BD_STATUS_TX_FRAME_802_3 |
3188 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3190 tbd->status.info.field =
3191 IPW_BD_STATUS_TX_FRAME_802_3 |
3192 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3194 tbd->buf_length = packet->info.d_struct.txb->
3195 fragments[i]->len - LIBIPW_3ADDR_LEN;
3197 tbd->host_addr = pci_map_single(priv->pci_dev,
3198 packet->info.d_struct.
3205 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3206 txq->next, tbd->host_addr,
3209 pci_dma_sync_single_for_device(priv->pci_dev,
3215 txq->next %= txq->entries;
3218 txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
3219 SET_STAT(&priv->txq_stat, txq->available);
3221 list_add_tail(element, &priv->fw_pend_list);
3222 INC_STAT(&priv->fw_pend_stat);
3225 if (txq->next != next) {
3226 /* kick off the DMA by notifying firmware the
3227 * write index has moved; make sure TBD stores are sync'd */
3228 write_register(priv->net_dev,
3229 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3234 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
3236 struct net_device *dev = priv->net_dev;
3237 unsigned long flags;
3240 spin_lock_irqsave(&priv->low_lock, flags);
3241 ipw2100_disable_interrupts(priv);
3243 read_register(dev, IPW_REG_INTA, &inta);
3245 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3246 (unsigned long)inta & IPW_INTERRUPT_MASK);
3251 /* We do not loop and keep polling for more interrupts as this
3252 * is frowned upon and doesn't play nicely with other potentially
3254 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3255 (unsigned long)inta & IPW_INTERRUPT_MASK);
3257 if (inta & IPW2100_INTA_FATAL_ERROR) {
3258 printk(KERN_WARNING DRV_NAME
3259 ": Fatal interrupt. Scheduling firmware restart.\n");
3261 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR);
3263 read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
3264 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3265 priv->net_dev->name, priv->fatal_error);
3267 read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
3268 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3269 priv->net_dev->name, tmp);
3271 /* Wake up any sleeping jobs */
3272 schedule_reset(priv);
3275 if (inta & IPW2100_INTA_PARITY_ERROR) {
3276 printk(KERN_ERR DRV_NAME
3277 ": ***** PARITY ERROR INTERRUPT !!!!\n");
3279 write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
3282 if (inta & IPW2100_INTA_RX_TRANSFER) {
3283 IPW_DEBUG_ISR("RX interrupt\n");
3285 priv->rx_interrupts++;
3287 write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER);
3289 __ipw2100_rx_process(priv);
3290 __ipw2100_tx_complete(priv);
3293 if (inta & IPW2100_INTA_TX_TRANSFER) {
3294 IPW_DEBUG_ISR("TX interrupt\n");
3296 priv->tx_interrupts++;
3298 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER);
3300 __ipw2100_tx_complete(priv);
3301 ipw2100_tx_send_commands(priv);
3302 ipw2100_tx_send_data(priv);
3305 if (inta & IPW2100_INTA_TX_COMPLETE) {
3306 IPW_DEBUG_ISR("TX complete\n");
3308 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE);
3310 __ipw2100_tx_complete(priv);
3313 if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
3314 /* ipw2100_handle_event(dev); */
3316 write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT);
3319 if (inta & IPW2100_INTA_FW_INIT_DONE) {
3320 IPW_DEBUG_ISR("FW init done interrupt\n");
3323 read_register(dev, IPW_REG_INTA, &tmp);
3324 if (tmp & (IPW2100_INTA_FATAL_ERROR |
3325 IPW2100_INTA_PARITY_ERROR)) {
3326 write_register(dev, IPW_REG_INTA,
3327 IPW2100_INTA_FATAL_ERROR |
3328 IPW2100_INTA_PARITY_ERROR);
3331 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE);
3334 if (inta & IPW2100_INTA_STATUS_CHANGE) {
3335 IPW_DEBUG_ISR("Status change interrupt\n");
3337 write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE);
3340 if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
3341 IPW_DEBUG_ISR("slave host mode interrupt\n");
3343 write_register(dev, IPW_REG_INTA,
3344 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
3348 ipw2100_enable_interrupts(priv);
3350 spin_unlock_irqrestore(&priv->low_lock, flags);
3352 IPW_DEBUG_ISR("exit\n");
3355 static irqreturn_t ipw2100_interrupt(int irq, void *data)
3357 struct ipw2100_priv *priv = data;
3358 u32 inta, inta_mask;
3363 spin_lock(&priv->low_lock);
3365 /* We check to see if we should be ignoring interrupts before
3366 * we touch the hardware. During ucode load if we try and handle
3367 * an interrupt we can cause keyboard problems as well as cause
3368 * the ucode to fail to initialize */
3369 if (!(priv->status & STATUS_INT_ENABLED)) {
3374 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
3375 read_register(priv->net_dev, IPW_REG_INTA, &inta);
3377 if (inta == 0xFFFFFFFF) {
3378 /* Hardware disappeared */
3379 printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
3383 inta &= IPW_INTERRUPT_MASK;
3385 if (!(inta & inta_mask)) {
3386 /* Shared interrupt */
3390 /* We disable the hardware interrupt here just to prevent unneeded
3391 * calls to be made. We disable this again within the actual
3392 * work tasklet, so if another part of the code re-enables the
3393 * interrupt, that is fine */
3394 ipw2100_disable_interrupts(priv);
3396 tasklet_schedule(&priv->irq_tasklet);
3397 spin_unlock(&priv->low_lock);
3401 spin_unlock(&priv->low_lock);
3405 static netdev_tx_t ipw2100_tx(struct libipw_txb *txb,
3406 struct net_device *dev, int pri)
3408 struct ipw2100_priv *priv = libipw_priv(dev);
3409 struct list_head *element;
3410 struct ipw2100_tx_packet *packet;
3411 unsigned long flags;
3413 spin_lock_irqsave(&priv->low_lock, flags);
3415 if (!(priv->status & STATUS_ASSOCIATED)) {
3416 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3417 priv->net_dev->stats.tx_carrier_errors++;
3418 netif_stop_queue(dev);
3422 if (list_empty(&priv->tx_free_list))
3425 element = priv->tx_free_list.next;
3426 packet = list_entry(element, struct ipw2100_tx_packet, list);
3428 packet->info.d_struct.txb = txb;
3430 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len);
3431 printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len);
3433 packet->jiffy_start = jiffies;
3436 DEC_STAT(&priv->tx_free_stat);
3438 list_add_tail(element, &priv->tx_pend_list);
3439 INC_STAT(&priv->tx_pend_stat);
3441 ipw2100_tx_send_data(priv);
3443 spin_unlock_irqrestore(&priv->low_lock, flags);
3444 return NETDEV_TX_OK;
3447 netif_stop_queue(dev);
3448 spin_unlock_irqrestore(&priv->low_lock, flags);
3449 return NETDEV_TX_BUSY;
3452 static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
3454 int i, j, err = -EINVAL;
3459 kmalloc(IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet),
3461 if (!priv->msg_buffers)
3464 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3465 v = pci_alloc_consistent(priv->pci_dev,
3466 sizeof(struct ipw2100_cmd_header), &p);
3468 printk(KERN_ERR DRV_NAME ": "
3469 "%s: PCI alloc failed for msg "
3470 "buffers.\n", priv->net_dev->name);
3475 memset(v, 0, sizeof(struct ipw2100_cmd_header));
3477 priv->msg_buffers[i].type = COMMAND;
3478 priv->msg_buffers[i].info.c_struct.cmd =
3479 (struct ipw2100_cmd_header *)v;
3480 priv->msg_buffers[i].info.c_struct.cmd_phys = p;
3483 if (i == IPW_COMMAND_POOL_SIZE)
3486 for (j = 0; j < i; j++) {
3487 pci_free_consistent(priv->pci_dev,
3488 sizeof(struct ipw2100_cmd_header),
3489 priv->msg_buffers[j].info.c_struct.cmd,
3490 priv->msg_buffers[j].info.c_struct.
3494 kfree(priv->msg_buffers);
3495 priv->msg_buffers = NULL;
3500 static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
3504 INIT_LIST_HEAD(&priv->msg_free_list);
3505 INIT_LIST_HEAD(&priv->msg_pend_list);
3507 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
3508 list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
3509 SET_STAT(&priv->msg_free_stat, i);
3514 static void ipw2100_msg_free(struct ipw2100_priv *priv)
3518 if (!priv->msg_buffers)
3521 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3522 pci_free_consistent(priv->pci_dev,
3523 sizeof(struct ipw2100_cmd_header),
3524 priv->msg_buffers[i].info.c_struct.cmd,
3525 priv->msg_buffers[i].info.c_struct.
3529 kfree(priv->msg_buffers);
3530 priv->msg_buffers = NULL;
3533 static ssize_t show_pci(struct device *d, struct device_attribute *attr,
3536 struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
3541 for (i = 0; i < 16; i++) {
3542 out += sprintf(out, "[%08X] ", i * 16);
3543 for (j = 0; j < 16; j += 4) {
3544 pci_read_config_dword(pci_dev, i * 16 + j, &val);
3545 out += sprintf(out, "%08X ", val);
3547 out += sprintf(out, "\n");
3553 static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
3555 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
3558 struct ipw2100_priv *p = dev_get_drvdata(d);
3559 return sprintf(buf, "0x%08x\n", (int)p->config);
3562 static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
3564 static ssize_t show_status(struct device *d, struct device_attribute *attr,
3567 struct ipw2100_priv *p = dev_get_drvdata(d);
3568 return sprintf(buf, "0x%08x\n", (int)p->status);
3571 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
3573 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
3576 struct ipw2100_priv *p = dev_get_drvdata(d);
3577 return sprintf(buf, "0x%08x\n", (int)p->capability);
3580 static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
3582 #define IPW2100_REG(x) { IPW_ ##x, #x }
3583 static const struct {
3587 IPW2100_REG(REG_GP_CNTRL),
3588 IPW2100_REG(REG_GPIO),
3589 IPW2100_REG(REG_INTA),
3590 IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),};
3591 #define IPW2100_NIC(x, s) { x, #x, s }
3592 static const struct {
3597 IPW2100_NIC(IPW2100_CONTROL_REG, 2),
3598 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3599 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3600 static const struct {
3605 IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
3606 IPW2100_ORD(STAT_TX_HOST_COMPLETE,
3607 "successful Host Tx's (MSDU)"),
3608 IPW2100_ORD(STAT_TX_DIR_DATA,
3609 "successful Directed Tx's (MSDU)"),
3610 IPW2100_ORD(STAT_TX_DIR_DATA1,
3611 "successful Directed Tx's (MSDU) @ 1MB"),
3612 IPW2100_ORD(STAT_TX_DIR_DATA2,
3613 "successful Directed Tx's (MSDU) @ 2MB"),
3614 IPW2100_ORD(STAT_TX_DIR_DATA5_5,
3615 "successful Directed Tx's (MSDU) @ 5_5MB"),
3616 IPW2100_ORD(STAT_TX_DIR_DATA11,
3617 "successful Directed Tx's (MSDU) @ 11MB"),
3618 IPW2100_ORD(STAT_TX_NODIR_DATA1,
3619 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3620 IPW2100_ORD(STAT_TX_NODIR_DATA2,
3621 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3622 IPW2100_ORD(STAT_TX_NODIR_DATA5_5,
3623 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3624 IPW2100_ORD(STAT_TX_NODIR_DATA11,
3625 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3626 IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
3627 IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
3628 IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
3629 IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
3630 IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
3631 IPW2100_ORD(STAT_TX_ASSN_RESP,
3632 "successful Association response Tx's"),
3633 IPW2100_ORD(STAT_TX_REASSN,
3634 "successful Reassociation Tx's"),
3635 IPW2100_ORD(STAT_TX_REASSN_RESP,
3636 "successful Reassociation response Tx's"),
3637 IPW2100_ORD(STAT_TX_PROBE,
3638 "probes successfully transmitted"),
3639 IPW2100_ORD(STAT_TX_PROBE_RESP,
3640 "probe responses successfully transmitted"),
3641 IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
3642 IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
3643 IPW2100_ORD(STAT_TX_DISASSN,
3644 "successful Disassociation TX"),
3645 IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
3646 IPW2100_ORD(STAT_TX_DEAUTH,
3647 "successful Deauthentication TX"),
3648 IPW2100_ORD(STAT_TX_TOTAL_BYTES,
3649 "Total successful Tx data bytes"),
3650 IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
3651 IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
3652 IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
3653 IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
3654 IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
3655 IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
3656 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,
3657 "times max tries in a hop failed"),
3658 IPW2100_ORD(STAT_TX_DISASSN_FAIL,
3659 "times disassociation failed"),
3660 IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
3661 IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
3662 IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
3663 IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
3664 IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
3665 IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
3666 IPW2100_ORD(STAT_RX_DIR_DATA5_5,
3667 "directed packets at 5.5MB"),
3668 IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
3669 IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"),
3670 IPW2100_ORD(STAT_RX_NODIR_DATA1,
3671 "nondirected packets at 1MB"),
3672 IPW2100_ORD(STAT_RX_NODIR_DATA2,
3673 "nondirected packets at 2MB"),
3674 IPW2100_ORD(STAT_RX_NODIR_DATA5_5,
3675 "nondirected packets at 5.5MB"),
3676 IPW2100_ORD(STAT_RX_NODIR_DATA11,
3677 "nondirected packets at 11MB"),
3678 IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
3679 IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS,
3681 IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
3682 IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
3683 IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
3684 IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
3685 IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
3686 IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
3687 IPW2100_ORD(STAT_RX_REASSN_RESP,
3688 "Reassociation response Rx's"),
3689 IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
3690 IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
3691 IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
3692 IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
3693 IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
3694 IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
3695 IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
3696 IPW2100_ORD(STAT_RX_TOTAL_BYTES,
3697 "Total rx data bytes received"),
3698 IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
3699 IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
3700 IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
3701 IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
3702 IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
3703 IPW2100_ORD(STAT_RX_DUPLICATE1,
3704 "duplicate rx packets at 1MB"),
3705 IPW2100_ORD(STAT_RX_DUPLICATE2,
3706 "duplicate rx packets at 2MB"),
3707 IPW2100_ORD(STAT_RX_DUPLICATE5_5,
3708 "duplicate rx packets at 5.5MB"),
3709 IPW2100_ORD(STAT_RX_DUPLICATE11,
3710 "duplicate rx packets at 11MB"),
3711 IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
3712 IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
3713 IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
3714 IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
3715 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,
3716 "rx frames with invalid protocol"),
3717 IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
3718 IPW2100_ORD(STAT_RX_NO_BUFFER,
3719 "rx frames rejected due to no buffer"),
3720 IPW2100_ORD(STAT_RX_MISSING_FRAG,
3721 "rx frames dropped due to missing fragment"),
3722 IPW2100_ORD(STAT_RX_ORPHAN_FRAG,
3723 "rx frames dropped due to non-sequential fragment"),
3724 IPW2100_ORD(STAT_RX_ORPHAN_FRAME,
3725 "rx frames dropped due to unmatched 1st frame"),
3726 IPW2100_ORD(STAT_RX_FRAG_AGEOUT,
3727 "rx frames dropped due to uncompleted frame"),
3728 IPW2100_ORD(STAT_RX_ICV_ERRORS,
3729 "ICV errors during decryption"),
3730 IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"),
3731 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
3732 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,
3733 "poll response timeouts"),
3734 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT,
3735 "timeouts waiting for last {broad,multi}cast pkt"),
3736 IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
3737 IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
3738 IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"),
3739 IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
3740 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,
3741 "current calculation of % missed beacons"),
3742 IPW2100_ORD(STAT_PERCENT_RETRIES,
3743 "current calculation of % missed tx retries"),
3744 IPW2100_ORD(ASSOCIATED_AP_PTR,
3745 "0 if not associated, else pointer to AP table entry"),
3746 IPW2100_ORD(AVAILABLE_AP_CNT,
3747 "AP's decsribed in the AP table"),
3748 IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
3749 IPW2100_ORD(STAT_AP_ASSNS, "associations"),
3750 IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
3751 IPW2100_ORD(STAT_ASSN_RESP_FAIL,
3752 "failures due to response fail"),
3753 IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
3754 IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
3755 IPW2100_ORD(STAT_ROAM_INHIBIT,
3756 "times roaming was inhibited due to activity"),
3757 IPW2100_ORD(RSSI_AT_ASSN,
3758 "RSSI of associated AP at time of association"),
3759 IPW2100_ORD(STAT_ASSN_CAUSE1,
3760 "reassociation: no probe response or TX on hop"),
3761 IPW2100_ORD(STAT_ASSN_CAUSE2,
3762 "reassociation: poor tx/rx quality"),
3763 IPW2100_ORD(STAT_ASSN_CAUSE3,
3764 "reassociation: tx/rx quality (excessive AP load"),
3765 IPW2100_ORD(STAT_ASSN_CAUSE4,
3766 "reassociation: AP RSSI level"),
3767 IPW2100_ORD(STAT_ASSN_CAUSE5,
3768 "reassociations due to load leveling"),
3769 IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
3770 IPW2100_ORD(STAT_AUTH_RESP_FAIL,
3771 "times authentication response failed"),
3772 IPW2100_ORD(STATION_TABLE_CNT,
3773 "entries in association table"),
3774 IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
3775 IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
3776 IPW2100_ORD(COUNTRY_CODE,
3777 "IEEE country code as recv'd from beacon"),
3778 IPW2100_ORD(COUNTRY_CHANNELS,
3779 "channels supported by country"),
3780 IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
3781 IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
3782 IPW2100_ORD(ANTENNA_DIVERSITY,
3783 "TRUE if antenna diversity is disabled"),
3784 IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
3785 IPW2100_ORD(OUR_FREQ,
3786 "current radio freq lower digits - channel ID"),
3787 IPW2100_ORD(RTC_TIME, "current RTC time"),
3788 IPW2100_ORD(PORT_TYPE, "operating mode"),
3789 IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
3790 IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
3791 IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
3792 IPW2100_ORD(BASIC_RATES, "basic tx rates"),
3793 IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
3794 IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
3795 IPW2100_ORD(CAPABILITIES,
3796 "Management frame capability field"),
3797 IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
3798 IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
3799 IPW2100_ORD(RTS_THRESHOLD,
3800 "Min packet length for RTS handshaking"),
3801 IPW2100_ORD(INT_MODE, "International mode"),
3802 IPW2100_ORD(FRAGMENTATION_THRESHOLD,
3803 "protocol frag threshold"),
3804 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
3805 "EEPROM offset in SRAM"),
3806 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,
3807 "EEPROM size in SRAM"),
3808 IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
3809 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,
3810 "EEPROM IBSS 11b channel set"),
3811 IPW2100_ORD(MAC_VERSION, "MAC Version"),
3812 IPW2100_ORD(MAC_REVISION, "MAC Revision"),
3813 IPW2100_ORD(RADIO_VERSION, "Radio Version"),
3814 IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
3815 IPW2100_ORD(UCODE_VERSION, "Ucode Version"),};
3817 static ssize_t show_registers(struct device *d, struct device_attribute *attr,
3821 struct ipw2100_priv *priv = dev_get_drvdata(d);
3822 struct net_device *dev = priv->net_dev;
3826 out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
3828 for (i = 0; i < ARRAY_SIZE(hw_data); i++) {
3829 read_register(dev, hw_data[i].addr, &val);
3830 out += sprintf(out, "%30s [%08X] : %08X\n",
3831 hw_data[i].name, hw_data[i].addr, val);
3837 static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
3839 static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
3842 struct ipw2100_priv *priv = dev_get_drvdata(d);
3843 struct net_device *dev = priv->net_dev;
3847 out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
3849 for (i = 0; i < ARRAY_SIZE(nic_data); i++) {
3854 switch (nic_data[i].size) {
3856 read_nic_byte(dev, nic_data[i].addr, &tmp8);
3857 out += sprintf(out, "%30s [%08X] : %02X\n",
3858 nic_data[i].name, nic_data[i].addr,
3862 read_nic_word(dev, nic_data[i].addr, &tmp16);
3863 out += sprintf(out, "%30s [%08X] : %04X\n",
3864 nic_data[i].name, nic_data[i].addr,
3868 read_nic_dword(dev, nic_data[i].addr, &tmp32);
3869 out += sprintf(out, "%30s [%08X] : %08X\n",
3870 nic_data[i].name, nic_data[i].addr,
3878 static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
3880 static ssize_t show_memory(struct device *d, struct device_attribute *attr,
3883 struct ipw2100_priv *priv = dev_get_drvdata(d);
3884 struct net_device *dev = priv->net_dev;
3885 static unsigned long loop = 0;
3891 if (loop >= 0x30000)
3894 /* sysfs provides us PAGE_SIZE buffer */
3895 while (len < PAGE_SIZE - 128 && loop < 0x30000) {
3897 if (priv->snapshot[0])
3898 for (i = 0; i < 4; i++)
3900 *(u32 *) SNAPSHOT_ADDR(loop + i * 4);
3902 for (i = 0; i < 4; i++)
3903 read_nic_dword(dev, loop + i * 4, &buffer[i]);
3906 len += sprintf(buf + len,
3911 ((u8 *) buffer)[0x0],
3912 ((u8 *) buffer)[0x1],
3913 ((u8 *) buffer)[0x2],
3914 ((u8 *) buffer)[0x3],
3915 ((u8 *) buffer)[0x4],
3916 ((u8 *) buffer)[0x5],
3917 ((u8 *) buffer)[0x6],
3918 ((u8 *) buffer)[0x7],
3919 ((u8 *) buffer)[0x8],
3920 ((u8 *) buffer)[0x9],
3921 ((u8 *) buffer)[0xa],
3922 ((u8 *) buffer)[0xb],
3923 ((u8 *) buffer)[0xc],
3924 ((u8 *) buffer)[0xd],
3925 ((u8 *) buffer)[0xe],
3926 ((u8 *) buffer)[0xf]);
3928 len += sprintf(buf + len, "%s\n",
3929 snprint_line(line, sizeof(line),
3930 (u8 *) buffer, 16, loop));
3937 static ssize_t store_memory(struct device *d, struct device_attribute *attr,
3938 const char *buf, size_t count)
3940 struct ipw2100_priv *priv = dev_get_drvdata(d);
3941 struct net_device *dev = priv->net_dev;
3942 const char *p = buf;
3944 (void)dev; /* kill unused-var warning for debug-only code */
3950 (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
3951 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3955 } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
3956 tolower(p[1]) == 'f')) {
3957 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3961 } else if (tolower(p[0]) == 'r') {
3962 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name);
3963 ipw2100_snapshot_free(priv);
3966 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3967 "reset = clear memory snapshot\n", dev->name);
3972 static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory);
3974 static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
3977 struct ipw2100_priv *priv = dev_get_drvdata(d);
3981 static int loop = 0;
3983 if (priv->status & STATUS_RF_KILL_MASK)
3986 if (loop >= ARRAY_SIZE(ord_data))
3989 /* sysfs provides us PAGE_SIZE buffer */
3990 while (len < PAGE_SIZE - 128 && loop < ARRAY_SIZE(ord_data)) {
3991 val_len = sizeof(u32);
3993 if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
3995 len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
3996 ord_data[loop].index,
3997 ord_data[loop].desc);
3999 len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
4000 ord_data[loop].index, val,
4001 ord_data[loop].desc);
4008 static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
4010 static ssize_t show_stats(struct device *d, struct device_attribute *attr,
4013 struct ipw2100_priv *priv = dev_get_drvdata(d);
4016 out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
4017 priv->interrupts, priv->tx_interrupts,
4018 priv->rx_interrupts, priv->inta_other);
4019 out += sprintf(out, "firmware resets: %d\n", priv->resets);
4020 out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
4021 #ifdef CONFIG_IPW2100_DEBUG
4022 out += sprintf(out, "packet mismatch image: %s\n",
4023 priv->snapshot[0] ? "YES" : "NO");
4029 static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
4031 static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
4035 if (mode == priv->ieee->iw_mode)
4038 err = ipw2100_disable_adapter(priv);
4040 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
4041 priv->net_dev->name, err);
4047 priv->net_dev->type = ARPHRD_ETHER;
4050 priv->net_dev->type = ARPHRD_ETHER;
4052 #ifdef CONFIG_IPW2100_MONITOR
4053 case IW_MODE_MONITOR:
4054 priv->last_mode = priv->ieee->iw_mode;
4055 priv->net_dev->type = ARPHRD_IEEE80211_RADIOTAP;
4057 #endif /* CONFIG_IPW2100_MONITOR */
4060 priv->ieee->iw_mode = mode;
4063 /* Indicate ipw2100_download_firmware download firmware
4064 * from disk instead of memory. */
4065 ipw2100_firmware.version = 0;
4068 printk(KERN_INFO "%s: Resetting on mode change.\n", priv->net_dev->name);
4069 priv->reset_backoff = 0;
4070 schedule_reset(priv);
4075 static ssize_t show_internals(struct device *d, struct device_attribute *attr,
4078 struct ipw2100_priv *priv = dev_get_drvdata(d);
4081 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
4083 if (priv->status & STATUS_ASSOCIATED)
4084 len += sprintf(buf + len, "connected: %lu\n",
4085 get_seconds() - priv->connect_start);
4087 len += sprintf(buf + len, "not connected\n");
4089 DUMP_VAR(ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx], "p");
4090 DUMP_VAR(status, "08lx");
4091 DUMP_VAR(config, "08lx");
4092 DUMP_VAR(capability, "08lx");
4095 sprintf(buf + len, "last_rtc: %lu\n",
4096 (unsigned long)priv->last_rtc);
4098 DUMP_VAR(fatal_error, "d");
4099 DUMP_VAR(stop_hang_check, "d");
4100 DUMP_VAR(stop_rf_kill, "d");
4101 DUMP_VAR(messages_sent, "d");
4103 DUMP_VAR(tx_pend_stat.value, "d");
4104 DUMP_VAR(tx_pend_stat.hi, "d");
4106 DUMP_VAR(tx_free_stat.value, "d");
4107 DUMP_VAR(tx_free_stat.lo, "d");
4109 DUMP_VAR(msg_free_stat.value, "d");
4110 DUMP_VAR(msg_free_stat.lo, "d");
4112 DUMP_VAR(msg_pend_stat.value, "d");
4113 DUMP_VAR(msg_pend_stat.hi, "d");
4115 DUMP_VAR(fw_pend_stat.value, "d");
4116 DUMP_VAR(fw_pend_stat.hi, "d");
4118 DUMP_VAR(txq_stat.value, "d");
4119 DUMP_VAR(txq_stat.lo, "d");
4121 DUMP_VAR(ieee->scans, "d");
4122 DUMP_VAR(reset_backoff, "d");
4127 static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
4129 static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
4132 struct ipw2100_priv *priv = dev_get_drvdata(d);
4133 char essid[IW_ESSID_MAX_SIZE + 1];
4137 unsigned int length;
4140 if (priv->status & STATUS_RF_KILL_MASK)
4143 memset(essid, 0, sizeof(essid));
4144 memset(bssid, 0, sizeof(bssid));
4146 length = IW_ESSID_MAX_SIZE;
4147 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
4149 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4152 length = sizeof(bssid);
4153 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
4156 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4159 length = sizeof(u32);
4160 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
4162 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
4165 out += sprintf(out, "ESSID: %s\n", essid);
4166 out += sprintf(out, "BSSID: %pM\n", bssid);
4167 out += sprintf(out, "Channel: %d\n", chan);
4172 static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
4174 #ifdef CONFIG_IPW2100_DEBUG
4175 static ssize_t show_debug_level(struct device_driver *d, char *buf)
4177 return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
4180 static ssize_t store_debug_level(struct device_driver *d,
4181 const char *buf, size_t count)
4183 char *p = (char *)buf;
4186 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4188 if (p[0] == 'x' || p[0] == 'X')
4190 val = simple_strtoul(p, &p, 16);
4192 val = simple_strtoul(p, &p, 10);
4194 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf);
4196 ipw2100_debug_level = val;
4198 return strnlen(buf, count);
4201 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
4203 #endif /* CONFIG_IPW2100_DEBUG */
4205 static ssize_t show_fatal_error(struct device *d,
4206 struct device_attribute *attr, char *buf)
4208 struct ipw2100_priv *priv = dev_get_drvdata(d);
4212 if (priv->fatal_error)
4213 out += sprintf(out, "0x%08X\n", priv->fatal_error);
4215 out += sprintf(out, "0\n");
4217 for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
4218 if (!priv->fatal_errors[(priv->fatal_index - i) %
4219 IPW2100_ERROR_QUEUE])
4222 out += sprintf(out, "%d. 0x%08X\n", i,
4223 priv->fatal_errors[(priv->fatal_index - i) %
4224 IPW2100_ERROR_QUEUE]);
4230 static ssize_t store_fatal_error(struct device *d,
4231 struct device_attribute *attr, const char *buf,
4234 struct ipw2100_priv *priv = dev_get_drvdata(d);
4235 schedule_reset(priv);
4239 static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error,
4242 static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
4245 struct ipw2100_priv *priv = dev_get_drvdata(d);
4246 return sprintf(buf, "%d\n", priv->ieee->scan_age);
4249 static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
4250 const char *buf, size_t count)
4252 struct ipw2100_priv *priv = dev_get_drvdata(d);
4253 struct net_device *dev = priv->net_dev;
4254 char buffer[] = "00000000";
4256 (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
4260 (void)dev; /* kill unused-var warning for debug-only code */
4262 IPW_DEBUG_INFO("enter\n");
4264 strncpy(buffer, buf, len);
4267 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4269 if (p[0] == 'x' || p[0] == 'X')
4271 val = simple_strtoul(p, &p, 16);
4273 val = simple_strtoul(p, &p, 10);
4275 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name);
4277 priv->ieee->scan_age = val;
4278 IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
4281 IPW_DEBUG_INFO("exit\n");
4285 static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
4287 static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
4290 /* 0 - RF kill not enabled
4291 1 - SW based RF kill active (sysfs)
4292 2 - HW based RF kill active
4293 3 - Both HW and SW baed RF kill active */
4294 struct ipw2100_priv *priv = dev_get_drvdata(d);
4295 int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
4296 (rf_kill_active(priv) ? 0x2 : 0x0);
4297 return sprintf(buf, "%i\n", val);
4300 static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
4302 if ((disable_radio ? 1 : 0) ==
4303 (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
4306 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4307 disable_radio ? "OFF" : "ON");
4309 mutex_lock(&priv->action_mutex);
4311 if (disable_radio) {
4312 priv->status |= STATUS_RF_KILL_SW;
4315 priv->status &= ~STATUS_RF_KILL_SW;
4316 if (rf_kill_active(priv)) {
4317 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4318 "disabled by HW switch\n");
4319 /* Make sure the RF_KILL check timer is running */
4320 priv->stop_rf_kill = 0;
4321 mod_delayed_work(system_wq, &priv->rf_kill,
4322 round_jiffies_relative(HZ));
4324 schedule_reset(priv);
4327 mutex_unlock(&priv->action_mutex);
4331 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
4332 const char *buf, size_t count)
4334 struct ipw2100_priv *priv = dev_get_drvdata(d);
4335 ipw_radio_kill_sw(priv, buf[0] == '1');
4339 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
4341 static struct attribute *ipw2100_sysfs_entries[] = {
4342 &dev_attr_hardware.attr,
4343 &dev_attr_registers.attr,
4344 &dev_attr_ordinals.attr,
4346 &dev_attr_stats.attr,
4347 &dev_attr_internals.attr,
4348 &dev_attr_bssinfo.attr,
4349 &dev_attr_memory.attr,
4350 &dev_attr_scan_age.attr,
4351 &dev_attr_fatal_error.attr,
4352 &dev_attr_rf_kill.attr,
4354 &dev_attr_status.attr,
4355 &dev_attr_capability.attr,
4359 static struct attribute_group ipw2100_attribute_group = {
4360 .attrs = ipw2100_sysfs_entries,
4363 static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
4365 struct ipw2100_status_queue *q = &priv->status_queue;
4367 IPW_DEBUG_INFO("enter\n");
4369 q->size = entries * sizeof(struct ipw2100_status);
4371 (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev,
4374 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4378 memset(q->drv, 0, q->size);
4380 IPW_DEBUG_INFO("exit\n");
4385 static void status_queue_free(struct ipw2100_priv *priv)
4387 IPW_DEBUG_INFO("enter\n");
4389 if (priv->status_queue.drv) {
4390 pci_free_consistent(priv->pci_dev, priv->status_queue.size,
4391 priv->status_queue.drv,
4392 priv->status_queue.nic);
4393 priv->status_queue.drv = NULL;
4396 IPW_DEBUG_INFO("exit\n");
4399 static int bd_queue_allocate(struct ipw2100_priv *priv,
4400 struct ipw2100_bd_queue *q, int entries)
4402 IPW_DEBUG_INFO("enter\n");
4404 memset(q, 0, sizeof(struct ipw2100_bd_queue));
4406 q->entries = entries;
4407 q->size = entries * sizeof(struct ipw2100_bd);
4408 q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
4411 ("can't allocate shared memory for buffer descriptors\n");
4414 memset(q->drv, 0, q->size);
4416 IPW_DEBUG_INFO("exit\n");
4421 static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q)
4423 IPW_DEBUG_INFO("enter\n");
4429 pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic);
4433 IPW_DEBUG_INFO("exit\n");
4436 static void bd_queue_initialize(struct ipw2100_priv *priv,
4437 struct ipw2100_bd_queue *q, u32 base, u32 size,
4440 IPW_DEBUG_INFO("enter\n");
4442 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv,
4445 write_register(priv->net_dev, base, q->nic);
4446 write_register(priv->net_dev, size, q->entries);
4447 write_register(priv->net_dev, r, q->oldest);
4448 write_register(priv->net_dev, w, q->next);
4450 IPW_DEBUG_INFO("exit\n");
4453 static void ipw2100_kill_works(struct ipw2100_priv *priv)
4455 priv->stop_rf_kill = 1;
4456 priv->stop_hang_check = 1;
4457 cancel_delayed_work_sync(&priv->reset_work);
4458 cancel_delayed_work_sync(&priv->security_work);
4459 cancel_delayed_work_sync(&priv->wx_event_work);
4460 cancel_delayed_work_sync(&priv->hang_check);
4461 cancel_delayed_work_sync(&priv->rf_kill);
4462 cancel_work_sync(&priv->scan_event_now);
4463 cancel_delayed_work_sync(&priv->scan_event_later);
4466 static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
4468 int i, j, err = -EINVAL;
4472 IPW_DEBUG_INFO("enter\n");
4474 err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
4476 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4477 priv->net_dev->name);
4482 kmalloc(TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet),
4484 if (!priv->tx_buffers) {
4485 printk(KERN_ERR DRV_NAME
4486 ": %s: alloc failed form tx buffers.\n",
4487 priv->net_dev->name);
4488 bd_queue_free(priv, &priv->tx_queue);
4492 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4493 v = pci_alloc_consistent(priv->pci_dev,
4494 sizeof(struct ipw2100_data_header),
4497 printk(KERN_ERR DRV_NAME
4498 ": %s: PCI alloc failed for tx " "buffers.\n",
4499 priv->net_dev->name);
4504 priv->tx_buffers[i].type = DATA;
4505 priv->tx_buffers[i].info.d_struct.data =
4506 (struct ipw2100_data_header *)v;
4507 priv->tx_buffers[i].info.d_struct.data_phys = p;
4508 priv->tx_buffers[i].info.d_struct.txb = NULL;
4511 if (i == TX_PENDED_QUEUE_LENGTH)
4514 for (j = 0; j < i; j++) {
4515 pci_free_consistent(priv->pci_dev,
4516 sizeof(struct ipw2100_data_header),
4517 priv->tx_buffers[j].info.d_struct.data,
4518 priv->tx_buffers[j].info.d_struct.
4522 kfree(priv->tx_buffers);
4523 priv->tx_buffers = NULL;
4528 static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
4532 IPW_DEBUG_INFO("enter\n");
4535 * reinitialize packet info lists
4537 INIT_LIST_HEAD(&priv->fw_pend_list);
4538 INIT_STAT(&priv->fw_pend_stat);
4541 * reinitialize lists
4543 INIT_LIST_HEAD(&priv->tx_pend_list);
4544 INIT_LIST_HEAD(&priv->tx_free_list);
4545 INIT_STAT(&priv->tx_pend_stat);
4546 INIT_STAT(&priv->tx_free_stat);
4548 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4549 /* We simply drop any SKBs that have been queued for
4551 if (priv->tx_buffers[i].info.d_struct.txb) {
4552 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4554 priv->tx_buffers[i].info.d_struct.txb = NULL;
4557 list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
4560 SET_STAT(&priv->tx_free_stat, i);
4562 priv->tx_queue.oldest = 0;
4563 priv->tx_queue.available = priv->tx_queue.entries;
4564 priv->tx_queue.next = 0;
4565 INIT_STAT(&priv->txq_stat);
4566 SET_STAT(&priv->txq_stat, priv->tx_queue.available);
4568 bd_queue_initialize(priv, &priv->tx_queue,
4569 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
4570 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
4571 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
4572 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
4574 IPW_DEBUG_INFO("exit\n");
4578 static void ipw2100_tx_free(struct ipw2100_priv *priv)
4582 IPW_DEBUG_INFO("enter\n");
4584 bd_queue_free(priv, &priv->tx_queue);
4586 if (!priv->tx_buffers)
4589 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4590 if (priv->tx_buffers[i].info.d_struct.txb) {
4591 libipw_txb_free(priv->tx_buffers[i].info.d_struct.
4593 priv->tx_buffers[i].info.d_struct.txb = NULL;
4595 if (priv->tx_buffers[i].info.d_struct.data)
4596 pci_free_consistent(priv->pci_dev,
4597 sizeof(struct ipw2100_data_header),
4598 priv->tx_buffers[i].info.d_struct.
4600 priv->tx_buffers[i].info.d_struct.
4604 kfree(priv->tx_buffers);
4605 priv->tx_buffers = NULL;
4607 IPW_DEBUG_INFO("exit\n");
4610 static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
4612 int i, j, err = -EINVAL;
4614 IPW_DEBUG_INFO("enter\n");
4616 err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
4618 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4622 err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
4624 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4625 bd_queue_free(priv, &priv->rx_queue);
4632 priv->rx_buffers = kmalloc(RX_QUEUE_LENGTH *
4633 sizeof(struct ipw2100_rx_packet),
4635 if (!priv->rx_buffers) {
4636 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4638 bd_queue_free(priv, &priv->rx_queue);
4640 status_queue_free(priv);
4645 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4646 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
4648 err = ipw2100_alloc_skb(priv, packet);
4649 if (unlikely(err)) {
4654 /* The BD holds the cache aligned address */
4655 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
4656 priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
4657 priv->status_queue.drv[i].status_fields = 0;
4660 if (i == RX_QUEUE_LENGTH)
4663 for (j = 0; j < i; j++) {
4664 pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
4665 sizeof(struct ipw2100_rx_packet),
4666 PCI_DMA_FROMDEVICE);
4667 dev_kfree_skb(priv->rx_buffers[j].skb);
4670 kfree(priv->rx_buffers);
4671 priv->rx_buffers = NULL;
4673 bd_queue_free(priv, &priv->rx_queue);
4675 status_queue_free(priv);
4680 static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
4682 IPW_DEBUG_INFO("enter\n");
4684 priv->rx_queue.oldest = 0;
4685 priv->rx_queue.available = priv->rx_queue.entries - 1;
4686 priv->rx_queue.next = priv->rx_queue.entries - 1;
4688 INIT_STAT(&priv->rxq_stat);
4689 SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
4691 bd_queue_initialize(priv, &priv->rx_queue,
4692 IPW_MEM_HOST_SHARED_RX_BD_BASE,
4693 IPW_MEM_HOST_SHARED_RX_BD_SIZE,
4694 IPW_MEM_HOST_SHARED_RX_READ_INDEX,
4695 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
4697 /* set up the status queue */
4698 write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
4699 priv->status_queue.nic);
4701 IPW_DEBUG_INFO("exit\n");
4704 static void ipw2100_rx_free(struct ipw2100_priv *priv)
4708 IPW_DEBUG_INFO("enter\n");
4710 bd_queue_free(priv, &priv->rx_queue);
4711 status_queue_free(priv);
4713 if (!priv->rx_buffers)
4716 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4717 if (priv->rx_buffers[i].rxp) {
4718 pci_unmap_single(priv->pci_dev,
4719 priv->rx_buffers[i].dma_addr,
4720 sizeof(struct ipw2100_rx),
4721 PCI_DMA_FROMDEVICE);
4722 dev_kfree_skb(priv->rx_buffers[i].skb);
4726 kfree(priv->rx_buffers);
4727 priv->rx_buffers = NULL;
4729 IPW_DEBUG_INFO("exit\n");
4732 static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
4734 u32 length = ETH_ALEN;
4739 err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, addr, &length);
4741 IPW_DEBUG_INFO("MAC address read failed\n");
4745 memcpy(priv->net_dev->dev_addr, addr, ETH_ALEN);
4746 IPW_DEBUG_INFO("card MAC is %pM\n", priv->net_dev->dev_addr);
4751 /********************************************************************
4755 ********************************************************************/
4757 static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
4759 struct host_command cmd = {
4760 .host_command = ADAPTER_ADDRESS,
4761 .host_command_sequence = 0,
4762 .host_command_length = ETH_ALEN
4766 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4768 IPW_DEBUG_INFO("enter\n");
4770 if (priv->config & CFG_CUSTOM_MAC) {
4771 memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN);
4772 memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
4774 memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
4777 err = ipw2100_hw_send_command(priv, &cmd);
4779 IPW_DEBUG_INFO("exit\n");
4783 static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
4786 struct host_command cmd = {
4787 .host_command = PORT_TYPE,
4788 .host_command_sequence = 0,
4789 .host_command_length = sizeof(u32)
4793 switch (port_type) {
4795 cmd.host_command_parameters[0] = IPW_BSS;
4798 cmd.host_command_parameters[0] = IPW_IBSS;
4802 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4803 port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
4806 err = ipw2100_disable_adapter(priv);
4808 printk(KERN_ERR DRV_NAME
4809 ": %s: Could not disable adapter %d\n",
4810 priv->net_dev->name, err);
4815 /* send cmd to firmware */
4816 err = ipw2100_hw_send_command(priv, &cmd);
4819 ipw2100_enable_adapter(priv);
4824 static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
4827 struct host_command cmd = {
4828 .host_command = CHANNEL,
4829 .host_command_sequence = 0,
4830 .host_command_length = sizeof(u32)
4834 cmd.host_command_parameters[0] = channel;
4836 IPW_DEBUG_HC("CHANNEL: %d\n", channel);
4838 /* If BSS then we don't support channel selection */
4839 if (priv->ieee->iw_mode == IW_MODE_INFRA)
4842 if ((channel != 0) &&
4843 ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
4847 err = ipw2100_disable_adapter(priv);
4852 err = ipw2100_hw_send_command(priv, &cmd);
4854 IPW_DEBUG_INFO("Failed to set channel to %d", channel);
4859 priv->config |= CFG_STATIC_CHANNEL;
4861 priv->config &= ~CFG_STATIC_CHANNEL;
4863 priv->channel = channel;
4866 err = ipw2100_enable_adapter(priv);
4874 static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
4876 struct host_command cmd = {
4877 .host_command = SYSTEM_CONFIG,
4878 .host_command_sequence = 0,
4879 .host_command_length = 12,
4881 u32 ibss_mask, len = sizeof(u32);
4884 /* Set system configuration */
4887 err = ipw2100_disable_adapter(priv);
4892 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
4893 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
4895 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
4896 IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE;
4898 if (!(priv->config & CFG_LONG_PREAMBLE))
4899 cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
4901 err = ipw2100_get_ordinal(priv,
4902 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
4905 ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
4907 cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
4908 cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
4911 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4913 err = ipw2100_hw_send_command(priv, &cmd);
4917 /* If IPv6 is configured in the kernel then we don't want to filter out all
4918 * of the multicast packets as IPv6 needs some. */
4919 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4920 cmd.host_command = ADD_MULTICAST;
4921 cmd.host_command_sequence = 0;
4922 cmd.host_command_length = 0;
4924 ipw2100_hw_send_command(priv, &cmd);
4927 err = ipw2100_enable_adapter(priv);
4935 static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
4938 struct host_command cmd = {
4939 .host_command = BASIC_TX_RATES,
4940 .host_command_sequence = 0,
4941 .host_command_length = 4
4945 cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
4948 err = ipw2100_disable_adapter(priv);
4953 /* Set BASIC TX Rate first */
4954 ipw2100_hw_send_command(priv, &cmd);
4957 cmd.host_command = TX_RATES;
4958 ipw2100_hw_send_command(priv, &cmd);
4960 /* Set MSDU TX Rate */
4961 cmd.host_command = MSDU_TX_RATES;
4962 ipw2100_hw_send_command(priv, &cmd);
4965 err = ipw2100_enable_adapter(priv);
4970 priv->tx_rates = rate;
4975 static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
4977 struct host_command cmd = {
4978 .host_command = POWER_MODE,
4979 .host_command_sequence = 0,
4980 .host_command_length = 4
4984 cmd.host_command_parameters[0] = power_level;
4986 err = ipw2100_hw_send_command(priv, &cmd);
4990 if (power_level == IPW_POWER_MODE_CAM)
4991 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
4993 priv->power_mode = IPW_POWER_ENABLED | power_level;
4995 #ifdef IPW2100_TX_POWER
4996 if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
4997 /* Set beacon interval */
4998 cmd.host_command = TX_POWER_INDEX;
4999 cmd.host_command_parameters[0] = (u32) priv->adhoc_power;
5001 err = ipw2100_hw_send_command(priv, &cmd);
5010 static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
5012 struct host_command cmd = {
5013 .host_command = RTS_THRESHOLD,
5014 .host_command_sequence = 0,
5015 .host_command_length = 4
5019 if (threshold & RTS_DISABLED)
5020 cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
5022 cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
5024 err = ipw2100_hw_send_command(priv, &cmd);
5028 priv->rts_threshold = threshold;
5034 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
5035 u32 threshold, int batch_mode)
5037 struct host_command cmd = {
5038 .host_command = FRAG_THRESHOLD,
5039 .host_command_sequence = 0,
5040 .host_command_length = 4,
5041 .host_command_parameters[0] = 0,
5046 err = ipw2100_disable_adapter(priv);
5052 threshold = DEFAULT_FRAG_THRESHOLD;
5054 threshold = max(threshold, MIN_FRAG_THRESHOLD);
5055 threshold = min(threshold, MAX_FRAG_THRESHOLD);
5058 cmd.host_command_parameters[0] = threshold;
5060 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
5062 err = ipw2100_hw_send_command(priv, &cmd);
5065 ipw2100_enable_adapter(priv);
5068 priv->frag_threshold = threshold;
5074 static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
5076 struct host_command cmd = {
5077 .host_command = SHORT_RETRY_LIMIT,
5078 .host_command_sequence = 0,
5079 .host_command_length = 4
5083 cmd.host_command_parameters[0] = retry;
5085 err = ipw2100_hw_send_command(priv, &cmd);
5089 priv->short_retry_limit = retry;
5094 static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
5096 struct host_command cmd = {
5097 .host_command = LONG_RETRY_LIMIT,
5098 .host_command_sequence = 0,
5099 .host_command_length = 4
5103 cmd.host_command_parameters[0] = retry;
5105 err = ipw2100_hw_send_command(priv, &cmd);
5109 priv->long_retry_limit = retry;
5114 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
5117 struct host_command cmd = {
5118 .host_command = MANDATORY_BSSID,
5119 .host_command_sequence = 0,
5120 .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
5124 #ifdef CONFIG_IPW2100_DEBUG
5126 IPW_DEBUG_HC("MANDATORY_BSSID: %pM\n", bssid);
5128 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
5130 /* if BSSID is empty then we disable mandatory bssid mode */
5132 memcpy(cmd.host_command_parameters, bssid, ETH_ALEN);
5135 err = ipw2100_disable_adapter(priv);
5140 err = ipw2100_hw_send_command(priv, &cmd);
5143 ipw2100_enable_adapter(priv);
5148 static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
5150 struct host_command cmd = {
5151 .host_command = DISASSOCIATION_BSSID,
5152 .host_command_sequence = 0,
5153 .host_command_length = ETH_ALEN
5158 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
5161 /* The Firmware currently ignores the BSSID and just disassociates from
5162 * the currently associated AP -- but in the off chance that a future
5163 * firmware does use the BSSID provided here, we go ahead and try and
5164 * set it to the currently associated AP's BSSID */
5165 memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
5167 err = ipw2100_hw_send_command(priv, &cmd);
5172 static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
5173 struct ipw2100_wpa_assoc_frame *, int)
5174 __attribute__ ((unused));
5176 static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
5177 struct ipw2100_wpa_assoc_frame *wpa_frame,
5180 struct host_command cmd = {
5181 .host_command = SET_WPA_IE,
5182 .host_command_sequence = 0,
5183 .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
5187 IPW_DEBUG_HC("SET_WPA_IE\n");
5190 err = ipw2100_disable_adapter(priv);
5195 memcpy(cmd.host_command_parameters, wpa_frame,
5196 sizeof(struct ipw2100_wpa_assoc_frame));
5198 err = ipw2100_hw_send_command(priv, &cmd);
5201 if (ipw2100_enable_adapter(priv))
5208 struct security_info_params {
5209 u32 allowed_ciphers;
5212 u8 replay_counters_number;
5213 u8 unicast_using_group;
5216 static int ipw2100_set_security_information(struct ipw2100_priv *priv,
5219 int unicast_using_group,
5222 struct host_command cmd = {
5223 .host_command = SET_SECURITY_INFORMATION,
5224 .host_command_sequence = 0,
5225 .host_command_length = sizeof(struct security_info_params)
5227 struct security_info_params *security =
5228 (struct security_info_params *)&cmd.host_command_parameters;
5230 memset(security, 0, sizeof(*security));
5232 /* If shared key AP authentication is turned on, then we need to
5233 * configure the firmware to try and use it.
5235 * Actual data encryption/decryption is handled by the host. */
5236 security->auth_mode = auth_mode;
5237 security->unicast_using_group = unicast_using_group;
5239 switch (security_level) {
5242 security->allowed_ciphers = IPW_NONE_CIPHER;
5245 security->allowed_ciphers = IPW_WEP40_CIPHER |
5249 security->allowed_ciphers = IPW_WEP40_CIPHER |
5250 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
5252 case SEC_LEVEL_2_CKIP:
5253 security->allowed_ciphers = IPW_WEP40_CIPHER |
5254 IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
5257 security->allowed_ciphers = IPW_WEP40_CIPHER |
5258 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
5263 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5264 security->auth_mode, security->allowed_ciphers, security_level);
5266 security->replay_counters_number = 0;
5269 err = ipw2100_disable_adapter(priv);
5274 err = ipw2100_hw_send_command(priv, &cmd);
5277 ipw2100_enable_adapter(priv);
5282 static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power)
5284 struct host_command cmd = {
5285 .host_command = TX_POWER_INDEX,
5286 .host_command_sequence = 0,
5287 .host_command_length = 4
5292 if (tx_power != IPW_TX_POWER_DEFAULT)
5293 tmp = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
5294 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
5296 cmd.host_command_parameters[0] = tmp;
5298 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
5299 err = ipw2100_hw_send_command(priv, &cmd);
5301 priv->tx_power = tx_power;
5306 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
5307 u32 interval, int batch_mode)
5309 struct host_command cmd = {
5310 .host_command = BEACON_INTERVAL,
5311 .host_command_sequence = 0,
5312 .host_command_length = 4
5316 cmd.host_command_parameters[0] = interval;
5318 IPW_DEBUG_INFO("enter\n");
5320 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5322 err = ipw2100_disable_adapter(priv);
5327 ipw2100_hw_send_command(priv, &cmd);
5330 err = ipw2100_enable_adapter(priv);
5336 IPW_DEBUG_INFO("exit\n");
5341 static void ipw2100_queues_initialize(struct ipw2100_priv *priv)
5343 ipw2100_tx_initialize(priv);
5344 ipw2100_rx_initialize(priv);
5345 ipw2100_msg_initialize(priv);
5348 static void ipw2100_queues_free(struct ipw2100_priv *priv)
5350 ipw2100_tx_free(priv);
5351 ipw2100_rx_free(priv);
5352 ipw2100_msg_free(priv);
5355 static int ipw2100_queues_allocate(struct ipw2100_priv *priv)
5357 if (ipw2100_tx_allocate(priv) ||
5358 ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv))
5364 ipw2100_tx_free(priv);
5365 ipw2100_rx_free(priv);
5366 ipw2100_msg_free(priv);
5370 #define IPW_PRIVACY_CAPABLE 0x0008
5372 static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
5375 struct host_command cmd = {
5376 .host_command = WEP_FLAGS,
5377 .host_command_sequence = 0,
5378 .host_command_length = 4
5382 cmd.host_command_parameters[0] = flags;
5384 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
5387 err = ipw2100_disable_adapter(priv);
5389 printk(KERN_ERR DRV_NAME
5390 ": %s: Could not disable adapter %d\n",
5391 priv->net_dev->name, err);
5396 /* send cmd to firmware */
5397 err = ipw2100_hw_send_command(priv, &cmd);
5400 ipw2100_enable_adapter(priv);
5405 struct ipw2100_wep_key {
5411 /* Macros to ease up priting WEP keys */
5412 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5413 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5414 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5415 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5420 * @priv: struct to work on
5421 * @idx: index of the key we want to set
5422 * @key: ptr to the key data to set
5423 * @len: length of the buffer at @key
5424 * @batch_mode: FIXME perform the operation in batch mode, not
5425 * disabling the device.
5427 * @returns 0 if OK, < 0 errno code on error.
5429 * Fill out a command structure with the new wep key, length an
5430 * index and send it down the wire.
5432 static int ipw2100_set_key(struct ipw2100_priv *priv,
5433 int idx, char *key, int len, int batch_mode)
5435 int keylen = len ? (len <= 5 ? 5 : 13) : 0;
5436 struct host_command cmd = {
5437 .host_command = WEP_KEY_INFO,
5438 .host_command_sequence = 0,
5439 .host_command_length = sizeof(struct ipw2100_wep_key),
5441 struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters;
5444 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5447 /* NOTE: We don't check cached values in case the firmware was reset
5448 * or some other problem is occurring. If the user is setting the key,
5449 * then we push the change */
5452 wep_key->len = keylen;
5455 memcpy(wep_key->key, key, len);
5456 memset(wep_key->key + len, 0, keylen - len);
5459 /* Will be optimized out on debug not being configured in */
5461 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5462 priv->net_dev->name, wep_key->idx);
5463 else if (keylen == 5)
5464 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
5465 priv->net_dev->name, wep_key->idx, wep_key->len,
5466 WEP_STR_64(wep_key->key));
5468 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5470 priv->net_dev->name, wep_key->idx, wep_key->len,
5471 WEP_STR_128(wep_key->key));
5474 err = ipw2100_disable_adapter(priv);
5475 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5477 printk(KERN_ERR DRV_NAME
5478 ": %s: Could not disable adapter %d\n",
5479 priv->net_dev->name, err);
5484 /* send cmd to firmware */
5485 err = ipw2100_hw_send_command(priv, &cmd);
5488 int err2 = ipw2100_enable_adapter(priv);
5495 static int ipw2100_set_key_index(struct ipw2100_priv *priv,
5496 int idx, int batch_mode)
5498 struct host_command cmd = {
5499 .host_command = WEP_KEY_INDEX,
5500 .host_command_sequence = 0,
5501 .host_command_length = 4,
5502 .host_command_parameters = {idx},
5506 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
5508 if (idx < 0 || idx > 3)
5512 err = ipw2100_disable_adapter(priv);
5514 printk(KERN_ERR DRV_NAME
5515 ": %s: Could not disable adapter %d\n",
5516 priv->net_dev->name, err);
5521 /* send cmd to firmware */
5522 err = ipw2100_hw_send_command(priv, &cmd);
5525 ipw2100_enable_adapter(priv);
5530 static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode)
5532 int i, err, auth_mode, sec_level, use_group;
5534 if (!(priv->status & STATUS_RUNNING))
5538 err = ipw2100_disable_adapter(priv);
5543 if (!priv->ieee->sec.enabled) {
5545 ipw2100_set_security_information(priv, IPW_AUTH_OPEN,
5548 auth_mode = IPW_AUTH_OPEN;
5549 if (priv->ieee->sec.flags & SEC_AUTH_MODE) {
5550 if (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY)
5551 auth_mode = IPW_AUTH_SHARED;
5552 else if (priv->ieee->sec.auth_mode == WLAN_AUTH_LEAP)
5553 auth_mode = IPW_AUTH_LEAP_CISCO_ID;
5556 sec_level = SEC_LEVEL_0;
5557 if (priv->ieee->sec.flags & SEC_LEVEL)
5558 sec_level = priv->ieee->sec.level;
5561 if (priv->ieee->sec.flags & SEC_UNICAST_GROUP)
5562 use_group = priv->ieee->sec.unicast_uses_group;
5565 ipw2100_set_security_information(priv, auth_mode, sec_level,
5572 if (priv->ieee->sec.enabled) {
5573 for (i = 0; i < 4; i++) {
5574 if (!(priv->ieee->sec.flags & (1 << i))) {
5575 memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN);
5576 priv->ieee->sec.key_sizes[i] = 0;
5578 err = ipw2100_set_key(priv, i,
5579 priv->ieee->sec.keys[i],
5587 ipw2100_set_key_index(priv, priv->ieee->crypt_info.tx_keyidx, 1);
5590 /* Always enable privacy so the Host can filter WEP packets if
5591 * encrypted data is sent up */
5593 ipw2100_set_wep_flags(priv,
5595 enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
5599 priv->status &= ~STATUS_SECURITY_UPDATED;
5603 ipw2100_enable_adapter(priv);
5608 static void ipw2100_security_work(struct work_struct *work)
5610 struct ipw2100_priv *priv =
5611 container_of(work, struct ipw2100_priv, security_work.work);
5613 /* If we happen to have reconnected before we get a chance to
5614 * process this, then update the security settings--which causes
5615 * a disassociation to occur */
5616 if (!(priv->status & STATUS_ASSOCIATED) &&
5617 priv->status & STATUS_SECURITY_UPDATED)
5618 ipw2100_configure_security(priv, 0);
5621 static void shim__set_security(struct net_device *dev,
5622 struct libipw_security *sec)
5624 struct ipw2100_priv *priv = libipw_priv(dev);
5625 int i, force_update = 0;
5627 mutex_lock(&priv->action_mutex);
5628 if (!(priv->status & STATUS_INITIALIZED))
5631 for (i = 0; i < 4; i++) {
5632 if (sec->flags & (1 << i)) {
5633 priv->ieee->sec.key_sizes[i] = sec->key_sizes[i];
5634 if (sec->key_sizes[i] == 0)
5635 priv->ieee->sec.flags &= ~(1 << i);
5637 memcpy(priv->ieee->sec.keys[i], sec->keys[i],
5639 if (sec->level == SEC_LEVEL_1) {
5640 priv->ieee->sec.flags |= (1 << i);
5641 priv->status |= STATUS_SECURITY_UPDATED;
5643 priv->ieee->sec.flags &= ~(1 << i);
5647 if ((sec->flags & SEC_ACTIVE_KEY) &&
5648 priv->ieee->sec.active_key != sec->active_key) {
5649 if (sec->active_key <= 3) {
5650 priv->ieee->sec.active_key = sec->active_key;
5651 priv->ieee->sec.flags |= SEC_ACTIVE_KEY;
5653 priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY;
5655 priv->status |= STATUS_SECURITY_UPDATED;
5658 if ((sec->flags & SEC_AUTH_MODE) &&
5659 (priv->ieee->sec.auth_mode != sec->auth_mode)) {
5660 priv->ieee->sec.auth_mode = sec->auth_mode;
5661 priv->ieee->sec.flags |= SEC_AUTH_MODE;
5662 priv->status |= STATUS_SECURITY_UPDATED;
5665 if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) {
5666 priv->ieee->sec.flags |= SEC_ENABLED;
5667 priv->ieee->sec.enabled = sec->enabled;
5668 priv->status |= STATUS_SECURITY_UPDATED;
5672 if (sec->flags & SEC_ENCRYPT)
5673 priv->ieee->sec.encrypt = sec->encrypt;
5675 if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) {
5676 priv->ieee->sec.level = sec->level;
5677 priv->ieee->sec.flags |= SEC_LEVEL;
5678 priv->status |= STATUS_SECURITY_UPDATED;
5681 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5682 priv->ieee->sec.flags & (1 << 8) ? '1' : '0',
5683 priv->ieee->sec.flags & (1 << 7) ? '1' : '0',
5684 priv->ieee->sec.flags & (1 << 6) ? '1' : '0',
5685 priv->ieee->sec.flags & (1 << 5) ? '1' : '0',
5686 priv->ieee->sec.flags & (1 << 4) ? '1' : '0',
5687 priv->ieee->sec.flags & (1 << 3) ? '1' : '0',
5688 priv->ieee->sec.flags & (1 << 2) ? '1' : '0',
5689 priv->ieee->sec.flags & (1 << 1) ? '1' : '0',
5690 priv->ieee->sec.flags & (1 << 0) ? '1' : '0');
5692 /* As a temporary work around to enable WPA until we figure out why
5693 * wpa_supplicant toggles the security capability of the driver, which
5694 * forces a disassocation with force_update...
5696 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5697 if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
5698 ipw2100_configure_security(priv, 0);
5700 mutex_unlock(&priv->action_mutex);
5703 static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
5709 IPW_DEBUG_INFO("enter\n");
5711 err = ipw2100_disable_adapter(priv);
5714 #ifdef CONFIG_IPW2100_MONITOR
5715 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
5716 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5720 IPW_DEBUG_INFO("exit\n");
5724 #endif /* CONFIG_IPW2100_MONITOR */
5726 err = ipw2100_read_mac_address(priv);
5730 err = ipw2100_set_mac_address(priv, batch_mode);
5734 err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
5738 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5739 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5744 err = ipw2100_system_config(priv, batch_mode);
5748 err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
5752 /* Default to power mode OFF */
5753 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
5757 err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
5761 if (priv->config & CFG_STATIC_BSSID)
5762 bssid = priv->bssid;
5765 err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
5769 if (priv->config & CFG_STATIC_ESSID)
5770 err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
5773 err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
5777 err = ipw2100_configure_security(priv, batch_mode);
5781 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5783 ipw2100_set_ibss_beacon_interval(priv,
5784 priv->beacon_interval,
5789 err = ipw2100_set_tx_power(priv, priv->tx_power);
5795 err = ipw2100_set_fragmentation_threshold(
5796 priv, priv->frag_threshold, batch_mode);
5801 IPW_DEBUG_INFO("exit\n");
5806 /*************************************************************************
5808 * EXTERNALLY CALLED METHODS
5810 *************************************************************************/
5812 /* This method is called by the network layer -- not to be confused with
5813 * ipw2100_set_mac_address() declared above called by this driver (and this
5814 * method as well) to talk to the firmware */
5815 static int ipw2100_set_address(struct net_device *dev, void *p)
5817 struct ipw2100_priv *priv = libipw_priv(dev);
5818 struct sockaddr *addr = p;
5821 if (!is_valid_ether_addr(addr->sa_data))
5822 return -EADDRNOTAVAIL;
5824 mutex_lock(&priv->action_mutex);
5826 priv->config |= CFG_CUSTOM_MAC;
5827 memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
5829 err = ipw2100_set_mac_address(priv, 0);
5833 priv->reset_backoff = 0;
5834 mutex_unlock(&priv->action_mutex);
5835 ipw2100_reset_adapter(&priv->reset_work.work);
5839 mutex_unlock(&priv->action_mutex);
5843 static int ipw2100_open(struct net_device *dev)
5845 struct ipw2100_priv *priv = libipw_priv(dev);
5846 unsigned long flags;
5847 IPW_DEBUG_INFO("dev->open\n");
5849 spin_lock_irqsave(&priv->low_lock, flags);
5850 if (priv->status & STATUS_ASSOCIATED) {
5851 netif_carrier_on(dev);
5852 netif_start_queue(dev);
5854 spin_unlock_irqrestore(&priv->low_lock, flags);
5859 static int ipw2100_close(struct net_device *dev)
5861 struct ipw2100_priv *priv = libipw_priv(dev);
5862 unsigned long flags;
5863 struct list_head *element;
5864 struct ipw2100_tx_packet *packet;
5866 IPW_DEBUG_INFO("enter\n");
5868 spin_lock_irqsave(&priv->low_lock, flags);
5870 if (priv->status & STATUS_ASSOCIATED)
5871 netif_carrier_off(dev);
5872 netif_stop_queue(dev);
5874 /* Flush the TX queue ... */
5875 while (!list_empty(&priv->tx_pend_list)) {
5876 element = priv->tx_pend_list.next;
5877 packet = list_entry(element, struct ipw2100_tx_packet, list);
5880 DEC_STAT(&priv->tx_pend_stat);
5882 libipw_txb_free(packet->info.d_struct.txb);
5883 packet->info.d_struct.txb = NULL;
5885 list_add_tail(element, &priv->tx_free_list);
5886 INC_STAT(&priv->tx_free_stat);
5888 spin_unlock_irqrestore(&priv->low_lock, flags);
5890 IPW_DEBUG_INFO("exit\n");
5896 * TODO: Fix this function... its just wrong
5898 static void ipw2100_tx_timeout(struct net_device *dev)
5900 struct ipw2100_priv *priv = libipw_priv(dev);
5902 dev->stats.tx_errors++;
5904 #ifdef CONFIG_IPW2100_MONITOR
5905 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
5909 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5911 schedule_reset(priv);
5914 static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value)
5916 /* This is called when wpa_supplicant loads and closes the driver
5918 priv->ieee->wpa_enabled = value;
5922 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
5925 struct libipw_device *ieee = priv->ieee;
5926 struct libipw_security sec = {
5927 .flags = SEC_AUTH_MODE,
5931 if (value & IW_AUTH_ALG_SHARED_KEY) {
5932 sec.auth_mode = WLAN_AUTH_SHARED_KEY;
5934 } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
5935 sec.auth_mode = WLAN_AUTH_OPEN;
5937 } else if (value & IW_AUTH_ALG_LEAP) {
5938 sec.auth_mode = WLAN_AUTH_LEAP;
5943 if (ieee->set_security)
5944 ieee->set_security(ieee->dev, &sec);
5951 static void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
5952 char *wpa_ie, int wpa_ie_len)
5955 struct ipw2100_wpa_assoc_frame frame;
5957 frame.fixed_ie_mask = 0;
5960 memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
5961 frame.var_ie_len = wpa_ie_len;
5963 /* make sure WPA is enabled */
5964 ipw2100_wpa_enable(priv, 1);
5965 ipw2100_set_wpa_ie(priv, &frame, 0);
5968 static void ipw_ethtool_get_drvinfo(struct net_device *dev,
5969 struct ethtool_drvinfo *info)
5971 struct ipw2100_priv *priv = libipw_priv(dev);
5972 char fw_ver[64], ucode_ver[64];
5974 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
5975 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
5977 ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
5978 ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
5980 snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
5981 fw_ver, priv->eeprom_version, ucode_ver);
5983 strlcpy(info->bus_info, pci_name(priv->pci_dev),
5984 sizeof(info->bus_info));
5987 static u32 ipw2100_ethtool_get_link(struct net_device *dev)
5989 struct ipw2100_priv *priv = libipw_priv(dev);
5990 return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
5993 static const struct ethtool_ops ipw2100_ethtool_ops = {
5994 .get_link = ipw2100_ethtool_get_link,
5995 .get_drvinfo = ipw_ethtool_get_drvinfo,
5998 static void ipw2100_hang_check(struct work_struct *work)
6000 struct ipw2100_priv *priv =
6001 container_of(work, struct ipw2100_priv, hang_check.work);
6002 unsigned long flags;
6003 u32 rtc = 0xa5a5a5a5;
6004 u32 len = sizeof(rtc);
6007 spin_lock_irqsave(&priv->low_lock, flags);
6009 if (priv->fatal_error != 0) {
6010 /* If fatal_error is set then we need to restart */
6011 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6012 priv->net_dev->name);
6015 } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
6016 (rtc == priv->last_rtc)) {
6017 /* Check if firmware is hung */
6018 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6019 priv->net_dev->name);
6026 priv->stop_hang_check = 1;
6029 /* Restart the NIC */
6030 schedule_reset(priv);
6033 priv->last_rtc = rtc;
6035 if (!priv->stop_hang_check)
6036 schedule_delayed_work(&priv->hang_check, HZ / 2);
6038 spin_unlock_irqrestore(&priv->low_lock, flags);
6041 static void ipw2100_rf_kill(struct work_struct *work)
6043 struct ipw2100_priv *priv =
6044 container_of(work, struct ipw2100_priv, rf_kill.work);
6045 unsigned long flags;
6047 spin_lock_irqsave(&priv->low_lock, flags);
6049 if (rf_kill_active(priv)) {
6050 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6051 if (!priv->stop_rf_kill)
6052 schedule_delayed_work(&priv->rf_kill,
6053 round_jiffies_relative(HZ));
6057 /* RF Kill is now disabled, so bring the device back up */
6059 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6060 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6062 schedule_reset(priv);
6064 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6068 spin_unlock_irqrestore(&priv->low_lock, flags);
6071 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
6073 static const struct net_device_ops ipw2100_netdev_ops = {
6074 .ndo_open = ipw2100_open,
6075 .ndo_stop = ipw2100_close,
6076 .ndo_start_xmit = libipw_xmit,
6077 .ndo_change_mtu = libipw_change_mtu,
6078 .ndo_tx_timeout = ipw2100_tx_timeout,
6079 .ndo_set_mac_address = ipw2100_set_address,
6080 .ndo_validate_addr = eth_validate_addr,
6083 /* Look into using netdev destructor to shutdown libipw? */
6085 static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
6086 void __iomem * ioaddr)
6088 struct ipw2100_priv *priv;
6089 struct net_device *dev;
6091 dev = alloc_libipw(sizeof(struct ipw2100_priv), 0);
6094 priv = libipw_priv(dev);
6095 priv->ieee = netdev_priv(dev);
6096 priv->pci_dev = pci_dev;
6097 priv->net_dev = dev;
6098 priv->ioaddr = ioaddr;
6100 priv->ieee->hard_start_xmit = ipw2100_tx;
6101 priv->ieee->set_security = shim__set_security;
6103 priv->ieee->perfect_rssi = -20;
6104 priv->ieee->worst_rssi = -85;
6106 dev->netdev_ops = &ipw2100_netdev_ops;
6107 dev->ethtool_ops = &ipw2100_ethtool_ops;
6108 dev->wireless_handlers = &ipw2100_wx_handler_def;
6109 priv->wireless_data.libipw = priv->ieee;
6110 dev->wireless_data = &priv->wireless_data;
6111 dev->watchdog_timeo = 3 * HZ;
6114 /* NOTE: We don't use the wireless_handlers hook
6115 * in dev as the system will start throwing WX requests
6116 * to us before we're actually initialized and it just
6117 * ends up causing problems. So, we just handle
6118 * the WX extensions through the ipw2100_ioctl interface */
6120 /* memset() puts everything to 0, so we only have explicitly set
6121 * those values that need to be something else */
6123 /* If power management is turned on, default to AUTO mode */
6124 priv->power_mode = IPW_POWER_AUTO;
6126 #ifdef CONFIG_IPW2100_MONITOR
6127 priv->config |= CFG_CRC_CHECK;
6129 priv->ieee->wpa_enabled = 0;
6130 priv->ieee->drop_unencrypted = 0;
6131 priv->ieee->privacy_invoked = 0;
6132 priv->ieee->ieee802_1x = 1;
6134 /* Set module parameters */
6135 switch (network_mode) {
6137 priv->ieee->iw_mode = IW_MODE_ADHOC;
6139 #ifdef CONFIG_IPW2100_MONITOR
6141 priv->ieee->iw_mode = IW_MODE_MONITOR;
6146 priv->ieee->iw_mode = IW_MODE_INFRA;
6151 priv->status |= STATUS_RF_KILL_SW;
6154 ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) {
6155 priv->config |= CFG_STATIC_CHANNEL;
6156 priv->channel = channel;
6160 priv->config |= CFG_ASSOCIATE;
6162 priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
6163 priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
6164 priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
6165 priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
6166 priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
6167 priv->tx_power = IPW_TX_POWER_DEFAULT;
6168 priv->tx_rates = DEFAULT_TX_RATES;
6170 strcpy(priv->nick, "ipw2100");
6172 spin_lock_init(&priv->low_lock);
6173 mutex_init(&priv->action_mutex);
6174 mutex_init(&priv->adapter_mutex);
6176 init_waitqueue_head(&priv->wait_command_queue);
6178 netif_carrier_off(dev);
6180 INIT_LIST_HEAD(&priv->msg_free_list);
6181 INIT_LIST_HEAD(&priv->msg_pend_list);
6182 INIT_STAT(&priv->msg_free_stat);
6183 INIT_STAT(&priv->msg_pend_stat);
6185 INIT_LIST_HEAD(&priv->tx_free_list);
6186 INIT_LIST_HEAD(&priv->tx_pend_list);
6187 INIT_STAT(&priv->tx_free_stat);
6188 INIT_STAT(&priv->tx_pend_stat);
6190 INIT_LIST_HEAD(&priv->fw_pend_list);
6191 INIT_STAT(&priv->fw_pend_stat);
6193 INIT_DELAYED_WORK(&priv->reset_work, ipw2100_reset_adapter);
6194 INIT_DELAYED_WORK(&priv->security_work, ipw2100_security_work);
6195 INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work);
6196 INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check);
6197 INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill);
6198 INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now);
6199 INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later);
6201 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
6202 ipw2100_irq_tasklet, (unsigned long)priv);
6204 /* NOTE: We do not start the deferred work for status checks yet */
6205 priv->stop_rf_kill = 1;
6206 priv->stop_hang_check = 1;
6211 static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
6212 const struct pci_device_id *ent)
6214 void __iomem *ioaddr;
6215 struct net_device *dev = NULL;
6216 struct ipw2100_priv *priv = NULL;
6221 IPW_DEBUG_INFO("enter\n");
6223 if (!(pci_resource_flags(pci_dev, 0) & IORESOURCE_MEM)) {
6224 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6229 ioaddr = pci_iomap(pci_dev, 0, 0);
6231 printk(KERN_WARNING DRV_NAME
6232 "Error calling ioremap_nocache.\n");
6237 /* allocate and initialize our net_device */
6238 dev = ipw2100_alloc_device(pci_dev, ioaddr);
6240 printk(KERN_WARNING DRV_NAME
6241 "Error calling ipw2100_alloc_device.\n");
6246 /* set up PCI mappings for device */
6247 err = pci_enable_device(pci_dev);
6249 printk(KERN_WARNING DRV_NAME
6250 "Error calling pci_enable_device.\n");
6254 priv = libipw_priv(dev);
6256 pci_set_master(pci_dev);
6257 pci_set_drvdata(pci_dev, priv);
6259 err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
6261 printk(KERN_WARNING DRV_NAME
6262 "Error calling pci_set_dma_mask.\n");
6263 pci_disable_device(pci_dev);
6267 err = pci_request_regions(pci_dev, DRV_NAME);
6269 printk(KERN_WARNING DRV_NAME
6270 "Error calling pci_request_regions.\n");
6271 pci_disable_device(pci_dev);
6275 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6276 * PCI Tx retries from interfering with C3 CPU state */
6277 pci_read_config_dword(pci_dev, 0x40, &val);
6278 if ((val & 0x0000ff00) != 0)
6279 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6281 pci_set_power_state(pci_dev, PCI_D0);
6283 if (!ipw2100_hw_is_adapter_in_system(dev)) {
6284 printk(KERN_WARNING DRV_NAME
6285 "Device not found via register read.\n");
6290 SET_NETDEV_DEV(dev, &pci_dev->dev);
6292 /* Force interrupts to be shut off on the device */
6293 priv->status |= STATUS_INT_ENABLED;
6294 ipw2100_disable_interrupts(priv);
6296 /* Allocate and initialize the Tx/Rx queues and lists */
6297 if (ipw2100_queues_allocate(priv)) {
6298 printk(KERN_WARNING DRV_NAME
6299 "Error calling ipw2100_queues_allocate.\n");
6303 ipw2100_queues_initialize(priv);
6305 err = request_irq(pci_dev->irq,
6306 ipw2100_interrupt, IRQF_SHARED, dev->name, priv);
6308 printk(KERN_WARNING DRV_NAME
6309 "Error calling request_irq: %d.\n", pci_dev->irq);
6312 dev->irq = pci_dev->irq;
6314 IPW_DEBUG_INFO("Attempting to register device...\n");
6316 printk(KERN_INFO DRV_NAME
6317 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6319 err = ipw2100_up(priv, 1);
6323 err = ipw2100_wdev_init(dev);
6328 /* Bring up the interface. Pre 0.46, after we registered the
6329 * network device we would call ipw2100_up. This introduced a race
6330 * condition with newer hotplug configurations (network was coming
6331 * up and making calls before the device was initialized).
6333 err = register_netdev(dev);
6335 printk(KERN_WARNING DRV_NAME
6336 "Error calling register_netdev.\n");
6341 mutex_lock(&priv->action_mutex);
6343 IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
6345 /* perform this after register_netdev so that dev->name is set */
6346 err = sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6350 /* If the RF Kill switch is disabled, go ahead and complete the
6351 * startup sequence */
6352 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6353 /* Enable the adapter - sends HOST_COMPLETE */
6354 if (ipw2100_enable_adapter(priv)) {
6355 printk(KERN_WARNING DRV_NAME
6356 ": %s: failed in call to enable adapter.\n",
6357 priv->net_dev->name);
6358 ipw2100_hw_stop_adapter(priv);
6363 /* Start a scan . . . */
6364 ipw2100_set_scan_options(priv);
6365 ipw2100_start_scan(priv);
6368 IPW_DEBUG_INFO("exit\n");
6370 priv->status |= STATUS_INITIALIZED;
6372 mutex_unlock(&priv->action_mutex);
6377 mutex_unlock(&priv->action_mutex);
6380 if (registered >= 2)
6381 unregister_netdev(dev);
6384 wiphy_unregister(priv->ieee->wdev.wiphy);
6385 kfree(priv->ieee->bg_band.channels);
6388 ipw2100_hw_stop_adapter(priv);
6390 ipw2100_disable_interrupts(priv);
6393 free_irq(dev->irq, priv);
6395 ipw2100_kill_works(priv);
6397 /* These are safe to call even if they weren't allocated */
6398 ipw2100_queues_free(priv);
6399 sysfs_remove_group(&pci_dev->dev.kobj,
6400 &ipw2100_attribute_group);
6402 free_libipw(dev, 0);
6403 pci_set_drvdata(pci_dev, NULL);
6406 pci_iounmap(pci_dev, ioaddr);
6408 pci_release_regions(pci_dev);
6409 pci_disable_device(pci_dev);
6413 static void ipw2100_pci_remove_one(struct pci_dev *pci_dev)
6415 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6416 struct net_device *dev = priv->net_dev;
6418 mutex_lock(&priv->action_mutex);
6420 priv->status &= ~STATUS_INITIALIZED;
6422 sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6425 if (ipw2100_firmware.version)
6426 ipw2100_release_firmware(priv, &ipw2100_firmware);
6428 /* Take down the hardware */
6431 /* Release the mutex so that the network subsystem can
6432 * complete any needed calls into the driver... */
6433 mutex_unlock(&priv->action_mutex);
6435 /* Unregister the device first - this results in close()
6436 * being called if the device is open. If we free storage
6437 * first, then close() will crash.
6438 * FIXME: remove the comment above. */
6439 unregister_netdev(dev);
6441 ipw2100_kill_works(priv);
6443 ipw2100_queues_free(priv);
6445 /* Free potential debugging firmware snapshot */
6446 ipw2100_snapshot_free(priv);
6448 free_irq(dev->irq, priv);
6450 pci_iounmap(pci_dev, priv->ioaddr);
6452 /* wiphy_unregister needs to be here, before free_libipw */
6453 wiphy_unregister(priv->ieee->wdev.wiphy);
6454 kfree(priv->ieee->bg_band.channels);
6455 free_libipw(dev, 0);
6457 pci_release_regions(pci_dev);
6458 pci_disable_device(pci_dev);
6460 IPW_DEBUG_INFO("exit\n");
6464 static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
6466 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6467 struct net_device *dev = priv->net_dev;
6469 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name);
6471 mutex_lock(&priv->action_mutex);
6472 if (priv->status & STATUS_INITIALIZED) {
6473 /* Take down the device; powers it off, etc. */
6477 /* Remove the PRESENT state of the device */
6478 netif_device_detach(dev);
6480 pci_save_state(pci_dev);
6481 pci_disable_device(pci_dev);
6482 pci_set_power_state(pci_dev, PCI_D3hot);
6484 priv->suspend_at = get_seconds();
6486 mutex_unlock(&priv->action_mutex);
6491 static int ipw2100_resume(struct pci_dev *pci_dev)
6493 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6494 struct net_device *dev = priv->net_dev;
6498 if (IPW2100_PM_DISABLED)
6501 mutex_lock(&priv->action_mutex);
6503 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name);
6505 pci_set_power_state(pci_dev, PCI_D0);
6506 err = pci_enable_device(pci_dev);
6508 printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
6510 mutex_unlock(&priv->action_mutex);
6513 pci_restore_state(pci_dev);
6516 * Suspend/Resume resets the PCI configuration space, so we have to
6517 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6518 * from interfering with C3 CPU state. pci_restore_state won't help
6519 * here since it only restores the first 64 bytes pci config header.
6521 pci_read_config_dword(pci_dev, 0x40, &val);
6522 if ((val & 0x0000ff00) != 0)
6523 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6525 /* Set the device back into the PRESENT state; this will also wake
6526 * the queue of needed */
6527 netif_device_attach(dev);
6529 priv->suspend_time = get_seconds() - priv->suspend_at;
6531 /* Bring the device back up */
6532 if (!(priv->status & STATUS_RF_KILL_SW))
6533 ipw2100_up(priv, 0);
6535 mutex_unlock(&priv->action_mutex);
6541 static void ipw2100_shutdown(struct pci_dev *pci_dev)
6543 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6545 /* Take down the device; powers it off, etc. */
6548 pci_disable_device(pci_dev);
6551 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6553 static DEFINE_PCI_DEVICE_TABLE(ipw2100_pci_id_table) = {
6554 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6555 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6556 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6557 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6558 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6559 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6560 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6561 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6562 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6563 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6564 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6565 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6566 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6568 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6569 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6570 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6571 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6572 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6574 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6575 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6576 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6577 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6578 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6579 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6580 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6582 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6584 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6585 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6586 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6587 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6588 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6589 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6590 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6592 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6593 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6594 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6595 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6596 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6597 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6599 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6603 MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
6605 static struct pci_driver ipw2100_pci_driver = {
6607 .id_table = ipw2100_pci_id_table,
6608 .probe = ipw2100_pci_init_one,
6609 .remove = ipw2100_pci_remove_one,
6611 .suspend = ipw2100_suspend,
6612 .resume = ipw2100_resume,
6614 .shutdown = ipw2100_shutdown,
6618 * Initialize the ipw2100 driver/module
6620 * @returns 0 if ok, < 0 errno node con error.
6622 * Note: we cannot init the /proc stuff until the PCI driver is there,
6623 * or we risk an unlikely race condition on someone accessing
6624 * uninitialized data in the PCI dev struct through /proc.
6626 static int __init ipw2100_init(void)
6630 printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
6631 printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
6633 pm_qos_add_request(&ipw2100_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
6634 PM_QOS_DEFAULT_VALUE);
6636 ret = pci_register_driver(&ipw2100_pci_driver);
6640 #ifdef CONFIG_IPW2100_DEBUG
6641 ipw2100_debug_level = debug;
6642 ret = driver_create_file(&ipw2100_pci_driver.driver,
6643 &driver_attr_debug_level);
6651 * Cleanup ipw2100 driver registration
6653 static void __exit ipw2100_exit(void)
6655 /* FIXME: IPG: check that we have no instances of the devices open */
6656 #ifdef CONFIG_IPW2100_DEBUG
6657 driver_remove_file(&ipw2100_pci_driver.driver,
6658 &driver_attr_debug_level);
6660 pci_unregister_driver(&ipw2100_pci_driver);
6661 pm_qos_remove_request(&ipw2100_pm_qos_req);
6664 module_init(ipw2100_init);
6665 module_exit(ipw2100_exit);
6667 static int ipw2100_wx_get_name(struct net_device *dev,
6668 struct iw_request_info *info,
6669 union iwreq_data *wrqu, char *extra)
6672 * This can be called at any time. No action lock required
6675 struct ipw2100_priv *priv = libipw_priv(dev);
6676 if (!(priv->status & STATUS_ASSOCIATED))
6677 strcpy(wrqu->name, "unassociated");
6679 snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
6681 IPW_DEBUG_WX("Name: %s\n", wrqu->name);
6685 static int ipw2100_wx_set_freq(struct net_device *dev,
6686 struct iw_request_info *info,
6687 union iwreq_data *wrqu, char *extra)
6689 struct ipw2100_priv *priv = libipw_priv(dev);
6690 struct iw_freq *fwrq = &wrqu->freq;
6693 if (priv->ieee->iw_mode == IW_MODE_INFRA)
6696 mutex_lock(&priv->action_mutex);
6697 if (!(priv->status & STATUS_INITIALIZED)) {
6702 /* if setting by freq convert to channel */
6704 if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) {
6705 int f = fwrq->m / 100000;
6708 while ((c < REG_MAX_CHANNEL) &&
6709 (f != ipw2100_frequencies[c]))
6712 /* hack to fall through */
6718 if (fwrq->e > 0 || fwrq->m > 1000) {
6721 } else { /* Set the channel */
6722 IPW_DEBUG_WX("SET Freq/Channel -> %d\n", fwrq->m);
6723 err = ipw2100_set_channel(priv, fwrq->m, 0);
6727 mutex_unlock(&priv->action_mutex);
6731 static int ipw2100_wx_get_freq(struct net_device *dev,
6732 struct iw_request_info *info,
6733 union iwreq_data *wrqu, char *extra)
6736 * This can be called at any time. No action lock required
6739 struct ipw2100_priv *priv = libipw_priv(dev);
6743 /* If we are associated, trying to associate, or have a statically
6744 * configured CHANNEL then return that; otherwise return ANY */
6745 if (priv->config & CFG_STATIC_CHANNEL ||
6746 priv->status & STATUS_ASSOCIATED)
6747 wrqu->freq.m = priv->channel;
6751 IPW_DEBUG_WX("GET Freq/Channel -> %d\n", priv->channel);
6756 static int ipw2100_wx_set_mode(struct net_device *dev,
6757 struct iw_request_info *info,
6758 union iwreq_data *wrqu, char *extra)
6760 struct ipw2100_priv *priv = libipw_priv(dev);
6763 IPW_DEBUG_WX("SET Mode -> %d\n", wrqu->mode);
6765 if (wrqu->mode == priv->ieee->iw_mode)
6768 mutex_lock(&priv->action_mutex);
6769 if (!(priv->status & STATUS_INITIALIZED)) {
6774 switch (wrqu->mode) {
6775 #ifdef CONFIG_IPW2100_MONITOR
6776 case IW_MODE_MONITOR:
6777 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
6779 #endif /* CONFIG_IPW2100_MONITOR */
6781 err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
6786 err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
6791 mutex_unlock(&priv->action_mutex);
6795 static int ipw2100_wx_get_mode(struct net_device *dev,
6796 struct iw_request_info *info,
6797 union iwreq_data *wrqu, char *extra)
6800 * This can be called at any time. No action lock required
6803 struct ipw2100_priv *priv = libipw_priv(dev);
6805 wrqu->mode = priv->ieee->iw_mode;
6806 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
6811 #define POWER_MODES 5
6813 /* Values are in microsecond */
6814 static const s32 timeout_duration[POWER_MODES] = {
6822 static const s32 period_duration[POWER_MODES] = {
6830 static int ipw2100_wx_get_range(struct net_device *dev,
6831 struct iw_request_info *info,
6832 union iwreq_data *wrqu, char *extra)
6835 * This can be called at any time. No action lock required
6838 struct ipw2100_priv *priv = libipw_priv(dev);
6839 struct iw_range *range = (struct iw_range *)extra;
6843 wrqu->data.length = sizeof(*range);
6844 memset(range, 0, sizeof(*range));
6846 /* Let's try to keep this struct in the same order as in
6847 * linux/include/wireless.h
6850 /* TODO: See what values we can set, and remove the ones we can't
6851 * set, or fill them with some default data.
6854 /* ~5 Mb/s real (802.11b) */
6855 range->throughput = 5 * 1000 * 1000;
6857 // range->sensitivity; /* signal level threshold range */
6859 range->max_qual.qual = 100;
6860 /* TODO: Find real max RSSI and stick here */
6861 range->max_qual.level = 0;
6862 range->max_qual.noise = 0;
6863 range->max_qual.updated = 7; /* Updated all three */
6865 range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
6866 /* TODO: Find real 'good' to 'bad' threshold value for RSSI */
6867 range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
6868 range->avg_qual.noise = 0;
6869 range->avg_qual.updated = 7; /* Updated all three */
6871 range->num_bitrates = RATE_COUNT;
6873 for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
6874 range->bitrate[i] = ipw2100_bg_rates[i].bitrate * 100 * 1000;
6877 range->min_rts = MIN_RTS_THRESHOLD;
6878 range->max_rts = MAX_RTS_THRESHOLD;
6879 range->min_frag = MIN_FRAG_THRESHOLD;
6880 range->max_frag = MAX_FRAG_THRESHOLD;
6882 range->min_pmp = period_duration[0]; /* Minimal PM period */
6883 range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */
6884 range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */
6885 range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */
6887 /* How to decode max/min PM period */
6888 range->pmp_flags = IW_POWER_PERIOD;
6889 /* How to decode max/min PM period */
6890 range->pmt_flags = IW_POWER_TIMEOUT;
6891 /* What PM options are supported */
6892 range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
6894 range->encoding_size[0] = 5;
6895 range->encoding_size[1] = 13; /* Different token sizes */
6896 range->num_encoding_sizes = 2; /* Number of entry in the list */
6897 range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
6898 // range->encoding_login_index; /* token index for login token */
6900 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
6901 range->txpower_capa = IW_TXPOW_DBM;
6902 range->num_txpower = IW_MAX_TXPOWER;
6903 for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16);
6906 ((IPW_TX_POWER_MAX_DBM -
6907 IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1))
6908 range->txpower[i] = level / 16;
6910 range->txpower_capa = 0;
6911 range->num_txpower = 0;
6914 /* Set the Wireless Extension versions */
6915 range->we_version_compiled = WIRELESS_EXT;
6916 range->we_version_source = 18;
6918 // range->retry_capa; /* What retry options are supported */
6919 // range->retry_flags; /* How to decode max/min retry limit */
6920 // range->r_time_flags; /* How to decode max/min retry life */
6921 // range->min_retry; /* Minimal number of retries */
6922 // range->max_retry; /* Maximal number of retries */
6923 // range->min_r_time; /* Minimal retry lifetime */
6924 // range->max_r_time; /* Maximal retry lifetime */
6926 range->num_channels = FREQ_COUNT;
6929 for (i = 0; i < FREQ_COUNT; i++) {
6930 // TODO: Include only legal frequencies for some countries
6931 // if (local->channel_mask & (1 << i)) {
6932 range->freq[val].i = i + 1;
6933 range->freq[val].m = ipw2100_frequencies[i] * 100000;
6934 range->freq[val].e = 1;
6937 if (val == IW_MAX_FREQUENCIES)
6940 range->num_frequency = val;
6942 /* Event capability (kernel + driver) */
6943 range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
6944 IW_EVENT_CAPA_MASK(SIOCGIWAP));
6945 range->event_capa[1] = IW_EVENT_CAPA_K_1;
6947 range->enc_capa = IW_ENC_CAPA_WPA | IW_ENC_CAPA_WPA2 |
6948 IW_ENC_CAPA_CIPHER_TKIP | IW_ENC_CAPA_CIPHER_CCMP;
6950 IPW_DEBUG_WX("GET Range\n");
6955 static int ipw2100_wx_set_wap(struct net_device *dev,
6956 struct iw_request_info *info,
6957 union iwreq_data *wrqu, char *extra)
6959 struct ipw2100_priv *priv = libipw_priv(dev);
6963 if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
6966 mutex_lock(&priv->action_mutex);
6967 if (!(priv->status & STATUS_INITIALIZED)) {
6972 if (is_broadcast_ether_addr(wrqu->ap_addr.sa_data) ||
6973 is_zero_ether_addr(wrqu->ap_addr.sa_data)) {
6974 /* we disable mandatory BSSID association */
6975 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
6976 priv->config &= ~CFG_STATIC_BSSID;
6977 err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
6981 priv->config |= CFG_STATIC_BSSID;
6982 memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
6984 err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
6986 IPW_DEBUG_WX("SET BSSID -> %pM\n", wrqu->ap_addr.sa_data);
6989 mutex_unlock(&priv->action_mutex);
6993 static int ipw2100_wx_get_wap(struct net_device *dev,
6994 struct iw_request_info *info,
6995 union iwreq_data *wrqu, char *extra)
6998 * This can be called at any time. No action lock required
7001 struct ipw2100_priv *priv = libipw_priv(dev);
7003 /* If we are associated, trying to associate, or have a statically
7004 * configured BSSID then return that; otherwise return ANY */
7005 if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) {
7006 wrqu->ap_addr.sa_family = ARPHRD_ETHER;
7007 memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN);
7009 memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
7011 IPW_DEBUG_WX("Getting WAP BSSID: %pM\n", wrqu->ap_addr.sa_data);
7015 static int ipw2100_wx_set_essid(struct net_device *dev,
7016 struct iw_request_info *info,
7017 union iwreq_data *wrqu, char *extra)
7019 struct ipw2100_priv *priv = libipw_priv(dev);
7020 char *essid = ""; /* ANY */
7023 DECLARE_SSID_BUF(ssid);
7025 mutex_lock(&priv->action_mutex);
7026 if (!(priv->status & STATUS_INITIALIZED)) {
7031 if (wrqu->essid.flags && wrqu->essid.length) {
7032 length = wrqu->essid.length;
7037 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7038 priv->config &= ~CFG_STATIC_ESSID;
7039 err = ipw2100_set_essid(priv, NULL, 0, 0);
7043 length = min(length, IW_ESSID_MAX_SIZE);
7045 priv->config |= CFG_STATIC_ESSID;
7047 if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
7048 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7053 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n",
7054 print_ssid(ssid, essid, length), length);
7056 priv->essid_len = length;
7057 memcpy(priv->essid, essid, priv->essid_len);
7059 err = ipw2100_set_essid(priv, essid, length, 0);
7062 mutex_unlock(&priv->action_mutex);
7066 static int ipw2100_wx_get_essid(struct net_device *dev,
7067 struct iw_request_info *info,
7068 union iwreq_data *wrqu, char *extra)
7071 * This can be called at any time. No action lock required
7074 struct ipw2100_priv *priv = libipw_priv(dev);
7075 DECLARE_SSID_BUF(ssid);
7077 /* If we are associated, trying to associate, or have a statically
7078 * configured ESSID then return that; otherwise return ANY */
7079 if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) {
7080 IPW_DEBUG_WX("Getting essid: '%s'\n",
7081 print_ssid(ssid, priv->essid, priv->essid_len));
7082 memcpy(extra, priv->essid, priv->essid_len);
7083 wrqu->essid.length = priv->essid_len;
7084 wrqu->essid.flags = 1; /* active */
7086 IPW_DEBUG_WX("Getting essid: ANY\n");
7087 wrqu->essid.length = 0;
7088 wrqu->essid.flags = 0; /* active */
7094 static int ipw2100_wx_set_nick(struct net_device *dev,
7095 struct iw_request_info *info,
7096 union iwreq_data *wrqu, char *extra)
7099 * This can be called at any time. No action lock required
7102 struct ipw2100_priv *priv = libipw_priv(dev);
7104 if (wrqu->data.length > IW_ESSID_MAX_SIZE)
7107 wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
7108 memset(priv->nick, 0, sizeof(priv->nick));
7109 memcpy(priv->nick, extra, wrqu->data.length);
7111 IPW_DEBUG_WX("SET Nickname -> %s\n", priv->nick);
7116 static int ipw2100_wx_get_nick(struct net_device *dev,
7117 struct iw_request_info *info,
7118 union iwreq_data *wrqu, char *extra)
7121 * This can be called at any time. No action lock required
7124 struct ipw2100_priv *priv = libipw_priv(dev);
7126 wrqu->data.length = strlen(priv->nick);
7127 memcpy(extra, priv->nick, wrqu->data.length);
7128 wrqu->data.flags = 1; /* active */
7130 IPW_DEBUG_WX("GET Nickname -> %s\n", extra);
7135 static int ipw2100_wx_set_rate(struct net_device *dev,
7136 struct iw_request_info *info,
7137 union iwreq_data *wrqu, char *extra)
7139 struct ipw2100_priv *priv = libipw_priv(dev);
7140 u32 target_rate = wrqu->bitrate.value;
7144 mutex_lock(&priv->action_mutex);
7145 if (!(priv->status & STATUS_INITIALIZED)) {
7152 if (target_rate == 1000000 ||
7153 (!wrqu->bitrate.fixed && target_rate > 1000000))
7154 rate |= TX_RATE_1_MBIT;
7155 if (target_rate == 2000000 ||
7156 (!wrqu->bitrate.fixed && target_rate > 2000000))
7157 rate |= TX_RATE_2_MBIT;
7158 if (target_rate == 5500000 ||
7159 (!wrqu->bitrate.fixed && target_rate > 5500000))
7160 rate |= TX_RATE_5_5_MBIT;
7161 if (target_rate == 11000000 ||
7162 (!wrqu->bitrate.fixed && target_rate > 11000000))
7163 rate |= TX_RATE_11_MBIT;
7165 rate = DEFAULT_TX_RATES;
7167 err = ipw2100_set_tx_rates(priv, rate, 0);
7169 IPW_DEBUG_WX("SET Rate -> %04X\n", rate);
7171 mutex_unlock(&priv->action_mutex);
7175 static int ipw2100_wx_get_rate(struct net_device *dev,
7176 struct iw_request_info *info,
7177 union iwreq_data *wrqu, char *extra)
7179 struct ipw2100_priv *priv = libipw_priv(dev);
7181 unsigned int len = sizeof(val);
7184 if (!(priv->status & STATUS_ENABLED) ||
7185 priv->status & STATUS_RF_KILL_MASK ||
7186 !(priv->status & STATUS_ASSOCIATED)) {
7187 wrqu->bitrate.value = 0;
7191 mutex_lock(&priv->action_mutex);
7192 if (!(priv->status & STATUS_INITIALIZED)) {
7197 err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
7199 IPW_DEBUG_WX("failed querying ordinals.\n");
7203 switch (val & TX_RATE_MASK) {
7204 case TX_RATE_1_MBIT:
7205 wrqu->bitrate.value = 1000000;
7207 case TX_RATE_2_MBIT:
7208 wrqu->bitrate.value = 2000000;
7210 case TX_RATE_5_5_MBIT:
7211 wrqu->bitrate.value = 5500000;
7213 case TX_RATE_11_MBIT:
7214 wrqu->bitrate.value = 11000000;
7217 wrqu->bitrate.value = 0;
7220 IPW_DEBUG_WX("GET Rate -> %d\n", wrqu->bitrate.value);
7223 mutex_unlock(&priv->action_mutex);
7227 static int ipw2100_wx_set_rts(struct net_device *dev,
7228 struct iw_request_info *info,
7229 union iwreq_data *wrqu, char *extra)
7231 struct ipw2100_priv *priv = libipw_priv(dev);
7234 /* Auto RTS not yet supported */
7235 if (wrqu->rts.fixed == 0)
7238 mutex_lock(&priv->action_mutex);
7239 if (!(priv->status & STATUS_INITIALIZED)) {
7244 if (wrqu->rts.disabled)
7245 value = priv->rts_threshold | RTS_DISABLED;
7247 if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) {
7251 value = wrqu->rts.value;
7254 err = ipw2100_set_rts_threshold(priv, value);
7256 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X\n", value);
7258 mutex_unlock(&priv->action_mutex);
7262 static int ipw2100_wx_get_rts(struct net_device *dev,
7263 struct iw_request_info *info,
7264 union iwreq_data *wrqu, char *extra)
7267 * This can be called at any time. No action lock required
7270 struct ipw2100_priv *priv = libipw_priv(dev);
7272 wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
7273 wrqu->rts.fixed = 1; /* no auto select */
7275 /* If RTS is set to the default value, then it is disabled */
7276 wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
7278 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X\n", wrqu->rts.value);
7283 static int ipw2100_wx_set_txpow(struct net_device *dev,
7284 struct iw_request_info *info,
7285 union iwreq_data *wrqu, char *extra)
7287 struct ipw2100_priv *priv = libipw_priv(dev);
7290 if (ipw_radio_kill_sw(priv, wrqu->txpower.disabled))
7291 return -EINPROGRESS;
7293 if (priv->ieee->iw_mode != IW_MODE_ADHOC)
7296 if ((wrqu->txpower.flags & IW_TXPOW_TYPE) != IW_TXPOW_DBM)
7299 if (wrqu->txpower.fixed == 0)
7300 value = IPW_TX_POWER_DEFAULT;
7302 if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
7303 wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
7306 value = wrqu->txpower.value;
7309 mutex_lock(&priv->action_mutex);
7310 if (!(priv->status & STATUS_INITIALIZED)) {
7315 err = ipw2100_set_tx_power(priv, value);
7317 IPW_DEBUG_WX("SET TX Power -> %d\n", value);
7320 mutex_unlock(&priv->action_mutex);
7324 static int ipw2100_wx_get_txpow(struct net_device *dev,
7325 struct iw_request_info *info,
7326 union iwreq_data *wrqu, char *extra)
7329 * This can be called at any time. No action lock required
7332 struct ipw2100_priv *priv = libipw_priv(dev);
7334 wrqu->txpower.disabled = (priv->status & STATUS_RF_KILL_MASK) ? 1 : 0;
7336 if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
7337 wrqu->txpower.fixed = 0;
7338 wrqu->txpower.value = IPW_TX_POWER_MAX_DBM;
7340 wrqu->txpower.fixed = 1;
7341 wrqu->txpower.value = priv->tx_power;
7344 wrqu->txpower.flags = IW_TXPOW_DBM;
7346 IPW_DEBUG_WX("GET TX Power -> %d\n", wrqu->txpower.value);
7351 static int ipw2100_wx_set_frag(struct net_device *dev,
7352 struct iw_request_info *info,
7353 union iwreq_data *wrqu, char *extra)
7356 * This can be called at any time. No action lock required
7359 struct ipw2100_priv *priv = libipw_priv(dev);
7361 if (!wrqu->frag.fixed)
7364 if (wrqu->frag.disabled) {
7365 priv->frag_threshold |= FRAG_DISABLED;
7366 priv->ieee->fts = DEFAULT_FTS;
7368 if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
7369 wrqu->frag.value > MAX_FRAG_THRESHOLD)
7372 priv->ieee->fts = wrqu->frag.value & ~0x1;
7373 priv->frag_threshold = priv->ieee->fts;
7376 IPW_DEBUG_WX("SET Frag Threshold -> %d\n", priv->ieee->fts);
7381 static int ipw2100_wx_get_frag(struct net_device *dev,
7382 struct iw_request_info *info,
7383 union iwreq_data *wrqu, char *extra)
7386 * This can be called at any time. No action lock required
7389 struct ipw2100_priv *priv = libipw_priv(dev);
7390 wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
7391 wrqu->frag.fixed = 0; /* no auto select */
7392 wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
7394 IPW_DEBUG_WX("GET Frag Threshold -> %d\n", wrqu->frag.value);
7399 static int ipw2100_wx_set_retry(struct net_device *dev,
7400 struct iw_request_info *info,
7401 union iwreq_data *wrqu, char *extra)
7403 struct ipw2100_priv *priv = libipw_priv(dev);
7406 if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
7409 if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
7412 mutex_lock(&priv->action_mutex);
7413 if (!(priv->status & STATUS_INITIALIZED)) {
7418 if (wrqu->retry.flags & IW_RETRY_SHORT) {
7419 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7420 IPW_DEBUG_WX("SET Short Retry Limit -> %d\n",
7425 if (wrqu->retry.flags & IW_RETRY_LONG) {
7426 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7427 IPW_DEBUG_WX("SET Long Retry Limit -> %d\n",
7432 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7434 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7436 IPW_DEBUG_WX("SET Both Retry Limits -> %d\n", wrqu->retry.value);
7439 mutex_unlock(&priv->action_mutex);
7443 static int ipw2100_wx_get_retry(struct net_device *dev,
7444 struct iw_request_info *info,
7445 union iwreq_data *wrqu, char *extra)
7448 * This can be called at any time. No action lock required
7451 struct ipw2100_priv *priv = libipw_priv(dev);
7453 wrqu->retry.disabled = 0; /* can't be disabled */
7455 if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME)
7458 if (wrqu->retry.flags & IW_RETRY_LONG) {
7459 wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_LONG;
7460 wrqu->retry.value = priv->long_retry_limit;
7463 (priv->short_retry_limit !=
7464 priv->long_retry_limit) ?
7465 IW_RETRY_LIMIT | IW_RETRY_SHORT : IW_RETRY_LIMIT;
7467 wrqu->retry.value = priv->short_retry_limit;
7470 IPW_DEBUG_WX("GET Retry -> %d\n", wrqu->retry.value);
7475 static int ipw2100_wx_set_scan(struct net_device *dev,
7476 struct iw_request_info *info,
7477 union iwreq_data *wrqu, char *extra)
7479 struct ipw2100_priv *priv = libipw_priv(dev);
7482 mutex_lock(&priv->action_mutex);
7483 if (!(priv->status & STATUS_INITIALIZED)) {
7488 IPW_DEBUG_WX("Initiating scan...\n");
7490 priv->user_requested_scan = 1;
7491 if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) {
7492 IPW_DEBUG_WX("Start scan failed.\n");
7494 /* TODO: Mark a scan as pending so when hardware initialized
7499 mutex_unlock(&priv->action_mutex);
7503 static int ipw2100_wx_get_scan(struct net_device *dev,
7504 struct iw_request_info *info,
7505 union iwreq_data *wrqu, char *extra)
7508 * This can be called at any time. No action lock required
7511 struct ipw2100_priv *priv = libipw_priv(dev);
7512 return libipw_wx_get_scan(priv->ieee, info, wrqu, extra);
7516 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7518 static int ipw2100_wx_set_encode(struct net_device *dev,
7519 struct iw_request_info *info,
7520 union iwreq_data *wrqu, char *key)
7523 * No check of STATUS_INITIALIZED required
7526 struct ipw2100_priv *priv = libipw_priv(dev);
7527 return libipw_wx_set_encode(priv->ieee, info, wrqu, key);
7530 static int ipw2100_wx_get_encode(struct net_device *dev,
7531 struct iw_request_info *info,
7532 union iwreq_data *wrqu, char *key)
7535 * This can be called at any time. No action lock required
7538 struct ipw2100_priv *priv = libipw_priv(dev);
7539 return libipw_wx_get_encode(priv->ieee, info, wrqu, key);
7542 static int ipw2100_wx_set_power(struct net_device *dev,
7543 struct iw_request_info *info,
7544 union iwreq_data *wrqu, char *extra)
7546 struct ipw2100_priv *priv = libipw_priv(dev);
7549 mutex_lock(&priv->action_mutex);
7550 if (!(priv->status & STATUS_INITIALIZED)) {
7555 if (wrqu->power.disabled) {
7556 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
7557 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
7558 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7562 switch (wrqu->power.flags & IW_POWER_MODE) {
7563 case IW_POWER_ON: /* If not specified */
7564 case IW_POWER_MODE: /* If set all mask */
7565 case IW_POWER_ALL_R: /* If explicitly state all */
7567 default: /* Otherwise we don't support it */
7568 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7574 /* If the user hasn't specified a power management mode yet, default
7576 priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
7577 err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
7579 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode);
7582 mutex_unlock(&priv->action_mutex);
7587 static int ipw2100_wx_get_power(struct net_device *dev,
7588 struct iw_request_info *info,
7589 union iwreq_data *wrqu, char *extra)
7592 * This can be called at any time. No action lock required
7595 struct ipw2100_priv *priv = libipw_priv(dev);
7597 if (!(priv->power_mode & IPW_POWER_ENABLED))
7598 wrqu->power.disabled = 1;
7600 wrqu->power.disabled = 0;
7601 wrqu->power.flags = 0;
7604 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
7614 static int ipw2100_wx_set_genie(struct net_device *dev,
7615 struct iw_request_info *info,
7616 union iwreq_data *wrqu, char *extra)
7619 struct ipw2100_priv *priv = libipw_priv(dev);
7620 struct libipw_device *ieee = priv->ieee;
7623 if (!ieee->wpa_enabled)
7626 if (wrqu->data.length > MAX_WPA_IE_LEN ||
7627 (wrqu->data.length && extra == NULL))
7630 if (wrqu->data.length) {
7631 buf = kmemdup(extra, wrqu->data.length, GFP_KERNEL);
7635 kfree(ieee->wpa_ie);
7637 ieee->wpa_ie_len = wrqu->data.length;
7639 kfree(ieee->wpa_ie);
7640 ieee->wpa_ie = NULL;
7641 ieee->wpa_ie_len = 0;
7644 ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
7650 static int ipw2100_wx_get_genie(struct net_device *dev,
7651 struct iw_request_info *info,
7652 union iwreq_data *wrqu, char *extra)
7654 struct ipw2100_priv *priv = libipw_priv(dev);
7655 struct libipw_device *ieee = priv->ieee;
7657 if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
7658 wrqu->data.length = 0;
7662 if (wrqu->data.length < ieee->wpa_ie_len)
7665 wrqu->data.length = ieee->wpa_ie_len;
7666 memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
7672 static int ipw2100_wx_set_auth(struct net_device *dev,
7673 struct iw_request_info *info,
7674 union iwreq_data *wrqu, char *extra)
7676 struct ipw2100_priv *priv = libipw_priv(dev);
7677 struct libipw_device *ieee = priv->ieee;
7678 struct iw_param *param = &wrqu->param;
7679 struct lib80211_crypt_data *crypt;
7680 unsigned long flags;
7683 switch (param->flags & IW_AUTH_INDEX) {
7684 case IW_AUTH_WPA_VERSION:
7685 case IW_AUTH_CIPHER_PAIRWISE:
7686 case IW_AUTH_CIPHER_GROUP:
7687 case IW_AUTH_KEY_MGMT:
7689 * ipw2200 does not use these parameters
7693 case IW_AUTH_TKIP_COUNTERMEASURES:
7694 crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
7695 if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags)
7698 flags = crypt->ops->get_flags(crypt->priv);
7701 flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7703 flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7705 crypt->ops->set_flags(flags, crypt->priv);
7709 case IW_AUTH_DROP_UNENCRYPTED:{
7712 * wpa_supplicant calls set_wpa_enabled when the driver
7713 * is loaded and unloaded, regardless of if WPA is being
7714 * used. No other calls are made which can be used to
7715 * determine if encryption will be used or not prior to
7716 * association being expected. If encryption is not being
7717 * used, drop_unencrypted is set to false, else true -- we
7718 * can use this to determine if the CAP_PRIVACY_ON bit should
7721 struct libipw_security sec = {
7722 .flags = SEC_ENABLED,
7723 .enabled = param->value,
7725 priv->ieee->drop_unencrypted = param->value;
7726 /* We only change SEC_LEVEL for open mode. Others
7727 * are set by ipw_wpa_set_encryption.
7729 if (!param->value) {
7730 sec.flags |= SEC_LEVEL;
7731 sec.level = SEC_LEVEL_0;
7733 sec.flags |= SEC_LEVEL;
7734 sec.level = SEC_LEVEL_1;
7736 if (priv->ieee->set_security)
7737 priv->ieee->set_security(priv->ieee->dev, &sec);
7741 case IW_AUTH_80211_AUTH_ALG:
7742 ret = ipw2100_wpa_set_auth_algs(priv, param->value);
7745 case IW_AUTH_WPA_ENABLED:
7746 ret = ipw2100_wpa_enable(priv, param->value);
7749 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7750 ieee->ieee802_1x = param->value;
7753 //case IW_AUTH_ROAMING_CONTROL:
7754 case IW_AUTH_PRIVACY_INVOKED:
7755 ieee->privacy_invoked = param->value;
7765 static int ipw2100_wx_get_auth(struct net_device *dev,
7766 struct iw_request_info *info,
7767 union iwreq_data *wrqu, char *extra)
7769 struct ipw2100_priv *priv = libipw_priv(dev);
7770 struct libipw_device *ieee = priv->ieee;
7771 struct lib80211_crypt_data *crypt;
7772 struct iw_param *param = &wrqu->param;
7775 switch (param->flags & IW_AUTH_INDEX) {
7776 case IW_AUTH_WPA_VERSION:
7777 case IW_AUTH_CIPHER_PAIRWISE:
7778 case IW_AUTH_CIPHER_GROUP:
7779 case IW_AUTH_KEY_MGMT:
7781 * wpa_supplicant will control these internally
7786 case IW_AUTH_TKIP_COUNTERMEASURES:
7787 crypt = priv->ieee->crypt_info.crypt[priv->ieee->crypt_info.tx_keyidx];
7788 if (!crypt || !crypt->ops->get_flags) {
7789 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
7790 "crypt not set!\n");
7794 param->value = (crypt->ops->get_flags(crypt->priv) &
7795 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0;
7799 case IW_AUTH_DROP_UNENCRYPTED:
7800 param->value = ieee->drop_unencrypted;
7803 case IW_AUTH_80211_AUTH_ALG:
7804 param->value = priv->ieee->sec.auth_mode;
7807 case IW_AUTH_WPA_ENABLED:
7808 param->value = ieee->wpa_enabled;
7811 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
7812 param->value = ieee->ieee802_1x;
7815 case IW_AUTH_ROAMING_CONTROL:
7816 case IW_AUTH_PRIVACY_INVOKED:
7817 param->value = ieee->privacy_invoked;
7826 /* SIOCSIWENCODEEXT */
7827 static int ipw2100_wx_set_encodeext(struct net_device *dev,
7828 struct iw_request_info *info,
7829 union iwreq_data *wrqu, char *extra)
7831 struct ipw2100_priv *priv = libipw_priv(dev);
7832 return libipw_wx_set_encodeext(priv->ieee, info, wrqu, extra);
7835 /* SIOCGIWENCODEEXT */
7836 static int ipw2100_wx_get_encodeext(struct net_device *dev,
7837 struct iw_request_info *info,
7838 union iwreq_data *wrqu, char *extra)
7840 struct ipw2100_priv *priv = libipw_priv(dev);
7841 return libipw_wx_get_encodeext(priv->ieee, info, wrqu, extra);
7845 static int ipw2100_wx_set_mlme(struct net_device *dev,
7846 struct iw_request_info *info,
7847 union iwreq_data *wrqu, char *extra)
7849 struct ipw2100_priv *priv = libipw_priv(dev);
7850 struct iw_mlme *mlme = (struct iw_mlme *)extra;
7853 reason = cpu_to_le16(mlme->reason_code);
7855 switch (mlme->cmd) {
7856 case IW_MLME_DEAUTH:
7860 case IW_MLME_DISASSOC:
7861 ipw2100_disassociate_bssid(priv);
7875 #ifdef CONFIG_IPW2100_MONITOR
7876 static int ipw2100_wx_set_promisc(struct net_device *dev,
7877 struct iw_request_info *info,
7878 union iwreq_data *wrqu, char *extra)
7880 struct ipw2100_priv *priv = libipw_priv(dev);
7881 int *parms = (int *)extra;
7882 int enable = (parms[0] > 0);
7885 mutex_lock(&priv->action_mutex);
7886 if (!(priv->status & STATUS_INITIALIZED)) {
7892 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
7893 err = ipw2100_set_channel(priv, parms[1], 0);
7896 priv->channel = parms[1];
7897 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
7899 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
7900 err = ipw2100_switch_mode(priv, priv->last_mode);
7903 mutex_unlock(&priv->action_mutex);
7907 static int ipw2100_wx_reset(struct net_device *dev,
7908 struct iw_request_info *info,
7909 union iwreq_data *wrqu, char *extra)
7911 struct ipw2100_priv *priv = libipw_priv(dev);
7912 if (priv->status & STATUS_INITIALIZED)
7913 schedule_reset(priv);
7919 static int ipw2100_wx_set_powermode(struct net_device *dev,
7920 struct iw_request_info *info,
7921 union iwreq_data *wrqu, char *extra)
7923 struct ipw2100_priv *priv = libipw_priv(dev);
7924 int err = 0, mode = *(int *)extra;
7926 mutex_lock(&priv->action_mutex);
7927 if (!(priv->status & STATUS_INITIALIZED)) {
7932 if ((mode < 0) || (mode > POWER_MODES))
7933 mode = IPW_POWER_AUTO;
7935 if (IPW_POWER_LEVEL(priv->power_mode) != mode)
7936 err = ipw2100_set_power_mode(priv, mode);
7938 mutex_unlock(&priv->action_mutex);
7942 #define MAX_POWER_STRING 80
7943 static int ipw2100_wx_get_powermode(struct net_device *dev,
7944 struct iw_request_info *info,
7945 union iwreq_data *wrqu, char *extra)
7948 * This can be called at any time. No action lock required
7951 struct ipw2100_priv *priv = libipw_priv(dev);
7952 int level = IPW_POWER_LEVEL(priv->power_mode);
7953 s32 timeout, period;
7955 if (!(priv->power_mode & IPW_POWER_ENABLED)) {
7956 snprintf(extra, MAX_POWER_STRING,
7957 "Power save level: %d (Off)", level);
7960 case IPW_POWER_MODE_CAM:
7961 snprintf(extra, MAX_POWER_STRING,
7962 "Power save level: %d (None)", level);
7964 case IPW_POWER_AUTO:
7965 snprintf(extra, MAX_POWER_STRING,
7966 "Power save level: %d (Auto)", level);
7969 timeout = timeout_duration[level - 1] / 1000;
7970 period = period_duration[level - 1] / 1000;
7971 snprintf(extra, MAX_POWER_STRING,
7972 "Power save level: %d "
7973 "(Timeout %dms, Period %dms)",
7974 level, timeout, period);
7978 wrqu->data.length = strlen(extra) + 1;
7983 static int ipw2100_wx_set_preamble(struct net_device *dev,
7984 struct iw_request_info *info,
7985 union iwreq_data *wrqu, char *extra)
7987 struct ipw2100_priv *priv = libipw_priv(dev);
7988 int err, mode = *(int *)extra;
7990 mutex_lock(&priv->action_mutex);
7991 if (!(priv->status & STATUS_INITIALIZED)) {
7997 priv->config |= CFG_LONG_PREAMBLE;
7999 priv->config &= ~CFG_LONG_PREAMBLE;
8005 err = ipw2100_system_config(priv, 0);
8008 mutex_unlock(&priv->action_mutex);
8012 static int ipw2100_wx_get_preamble(struct net_device *dev,
8013 struct iw_request_info *info,
8014 union iwreq_data *wrqu, char *extra)
8017 * This can be called at any time. No action lock required
8020 struct ipw2100_priv *priv = libipw_priv(dev);
8022 if (priv->config & CFG_LONG_PREAMBLE)
8023 snprintf(wrqu->name, IFNAMSIZ, "long (1)");
8025 snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
8030 #ifdef CONFIG_IPW2100_MONITOR
8031 static int ipw2100_wx_set_crc_check(struct net_device *dev,
8032 struct iw_request_info *info,
8033 union iwreq_data *wrqu, char *extra)
8035 struct ipw2100_priv *priv = libipw_priv(dev);
8036 int err, mode = *(int *)extra;
8038 mutex_lock(&priv->action_mutex);
8039 if (!(priv->status & STATUS_INITIALIZED)) {
8045 priv->config |= CFG_CRC_CHECK;
8047 priv->config &= ~CFG_CRC_CHECK;
8055 mutex_unlock(&priv->action_mutex);
8059 static int ipw2100_wx_get_crc_check(struct net_device *dev,
8060 struct iw_request_info *info,
8061 union iwreq_data *wrqu, char *extra)
8064 * This can be called at any time. No action lock required
8067 struct ipw2100_priv *priv = libipw_priv(dev);
8069 if (priv->config & CFG_CRC_CHECK)
8070 snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)");
8072 snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)");
8076 #endif /* CONFIG_IPW2100_MONITOR */
8078 static iw_handler ipw2100_wx_handlers[] = {
8079 IW_HANDLER(SIOCGIWNAME, ipw2100_wx_get_name),
8080 IW_HANDLER(SIOCSIWFREQ, ipw2100_wx_set_freq),
8081 IW_HANDLER(SIOCGIWFREQ, ipw2100_wx_get_freq),
8082 IW_HANDLER(SIOCSIWMODE, ipw2100_wx_set_mode),
8083 IW_HANDLER(SIOCGIWMODE, ipw2100_wx_get_mode),
8084 IW_HANDLER(SIOCGIWRANGE, ipw2100_wx_get_range),
8085 IW_HANDLER(SIOCSIWAP, ipw2100_wx_set_wap),
8086 IW_HANDLER(SIOCGIWAP, ipw2100_wx_get_wap),
8087 IW_HANDLER(SIOCSIWMLME, ipw2100_wx_set_mlme),
8088 IW_HANDLER(SIOCSIWSCAN, ipw2100_wx_set_scan),
8089 IW_HANDLER(SIOCGIWSCAN, ipw2100_wx_get_scan),
8090 IW_HANDLER(SIOCSIWESSID, ipw2100_wx_set_essid),
8091 IW_HANDLER(SIOCGIWESSID, ipw2100_wx_get_essid),
8092 IW_HANDLER(SIOCSIWNICKN, ipw2100_wx_set_nick),
8093 IW_HANDLER(SIOCGIWNICKN, ipw2100_wx_get_nick),
8094 IW_HANDLER(SIOCSIWRATE, ipw2100_wx_set_rate),
8095 IW_HANDLER(SIOCGIWRATE, ipw2100_wx_get_rate),
8096 IW_HANDLER(SIOCSIWRTS, ipw2100_wx_set_rts),
8097 IW_HANDLER(SIOCGIWRTS, ipw2100_wx_get_rts),
8098 IW_HANDLER(SIOCSIWFRAG, ipw2100_wx_set_frag),
8099 IW_HANDLER(SIOCGIWFRAG, ipw2100_wx_get_frag),
8100 IW_HANDLER(SIOCSIWTXPOW, ipw2100_wx_set_txpow),
8101 IW_HANDLER(SIOCGIWTXPOW, ipw2100_wx_get_txpow),
8102 IW_HANDLER(SIOCSIWRETRY, ipw2100_wx_set_retry),
8103 IW_HANDLER(SIOCGIWRETRY, ipw2100_wx_get_retry),
8104 IW_HANDLER(SIOCSIWENCODE, ipw2100_wx_set_encode),
8105 IW_HANDLER(SIOCGIWENCODE, ipw2100_wx_get_encode),
8106 IW_HANDLER(SIOCSIWPOWER, ipw2100_wx_set_power),
8107 IW_HANDLER(SIOCGIWPOWER, ipw2100_wx_get_power),
8108 IW_HANDLER(SIOCSIWGENIE, ipw2100_wx_set_genie),
8109 IW_HANDLER(SIOCGIWGENIE, ipw2100_wx_get_genie),
8110 IW_HANDLER(SIOCSIWAUTH, ipw2100_wx_set_auth),
8111 IW_HANDLER(SIOCGIWAUTH, ipw2100_wx_get_auth),
8112 IW_HANDLER(SIOCSIWENCODEEXT, ipw2100_wx_set_encodeext),
8113 IW_HANDLER(SIOCGIWENCODEEXT, ipw2100_wx_get_encodeext),
8116 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8117 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8118 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8119 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8120 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8121 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8122 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8123 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8125 static const struct iw_priv_args ipw2100_private_args[] = {
8127 #ifdef CONFIG_IPW2100_MONITOR
8129 IPW2100_PRIV_SET_MONITOR,
8130 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"},
8133 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"},
8134 #endif /* CONFIG_IPW2100_MONITOR */
8137 IPW2100_PRIV_SET_POWER,
8138 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"},
8140 IPW2100_PRIV_GET_POWER,
8141 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING,
8144 IPW2100_PRIV_SET_LONGPREAMBLE,
8145 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
8147 IPW2100_PRIV_GET_LONGPREAMBLE,
8148 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"},
8149 #ifdef CONFIG_IPW2100_MONITOR
8151 IPW2100_PRIV_SET_CRC_CHECK,
8152 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"},
8154 IPW2100_PRIV_GET_CRC_CHECK,
8155 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"},
8156 #endif /* CONFIG_IPW2100_MONITOR */
8159 static iw_handler ipw2100_private_handler[] = {
8160 #ifdef CONFIG_IPW2100_MONITOR
8161 ipw2100_wx_set_promisc,
8163 #else /* CONFIG_IPW2100_MONITOR */
8166 #endif /* CONFIG_IPW2100_MONITOR */
8167 ipw2100_wx_set_powermode,
8168 ipw2100_wx_get_powermode,
8169 ipw2100_wx_set_preamble,
8170 ipw2100_wx_get_preamble,
8171 #ifdef CONFIG_IPW2100_MONITOR
8172 ipw2100_wx_set_crc_check,
8173 ipw2100_wx_get_crc_check,
8174 #else /* CONFIG_IPW2100_MONITOR */
8177 #endif /* CONFIG_IPW2100_MONITOR */
8181 * Get wireless statistics.
8182 * Called by /proc/net/wireless
8183 * Also called by SIOCGIWSTATS
8185 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
8200 struct ipw2100_priv *priv = libipw_priv(dev);
8201 struct iw_statistics *wstats;
8202 u32 rssi, tx_retries, missed_beacons, tx_failures;
8203 u32 ord_len = sizeof(u32);
8206 return (struct iw_statistics *)NULL;
8208 wstats = &priv->wstats;
8210 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8211 * ipw2100_wx_wireless_stats seems to be called before fw is
8212 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8213 * and associated; if not associcated, the values are all meaningless
8214 * anyway, so set them all to NULL and INVALID */
8215 if (!(priv->status & STATUS_ASSOCIATED)) {
8216 wstats->miss.beacon = 0;
8217 wstats->discard.retries = 0;
8218 wstats->qual.qual = 0;
8219 wstats->qual.level = 0;
8220 wstats->qual.noise = 0;
8221 wstats->qual.updated = 7;
8222 wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
8223 IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
8227 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
8228 &missed_beacons, &ord_len))
8229 goto fail_get_ordinal;
8231 /* If we don't have a connection the quality and level is 0 */
8232 if (!(priv->status & STATUS_ASSOCIATED)) {
8233 wstats->qual.qual = 0;
8234 wstats->qual.level = 0;
8236 if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
8238 goto fail_get_ordinal;
8239 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8241 rssi_qual = rssi * POOR / 10;
8243 rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
8245 rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
8247 rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
8250 rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
8253 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
8254 &tx_retries, &ord_len))
8255 goto fail_get_ordinal;
8257 if (tx_retries > 75)
8258 tx_qual = (90 - tx_retries) * POOR / 15;
8259 else if (tx_retries > 70)
8260 tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
8261 else if (tx_retries > 65)
8262 tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
8263 else if (tx_retries > 50)
8264 tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
8267 tx_qual = (50 - tx_retries) *
8268 (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
8270 if (missed_beacons > 50)
8271 beacon_qual = (60 - missed_beacons) * POOR / 10;
8272 else if (missed_beacons > 40)
8273 beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
8275 else if (missed_beacons > 32)
8276 beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
8278 else if (missed_beacons > 20)
8279 beacon_qual = (32 - missed_beacons) *
8280 (VERY_GOOD - GOOD) / 20 + GOOD;
8282 beacon_qual = (20 - missed_beacons) *
8283 (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
8285 quality = min(tx_qual, rssi_qual);
8286 quality = min(beacon_qual, quality);
8288 #ifdef CONFIG_IPW2100_DEBUG
8289 if (beacon_qual == quality)
8290 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8291 else if (tx_qual == quality)
8292 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8293 else if (quality != 100)
8294 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8296 IPW_DEBUG_WX("Quality not clamped.\n");
8299 wstats->qual.qual = quality;
8300 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8303 wstats->qual.noise = 0;
8304 wstats->qual.updated = 7;
8305 wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
8307 /* FIXME: this is percent and not a # */
8308 wstats->miss.beacon = missed_beacons;
8310 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
8311 &tx_failures, &ord_len))
8312 goto fail_get_ordinal;
8313 wstats->discard.retries = tx_failures;
8318 IPW_DEBUG_WX("failed querying ordinals.\n");
8320 return (struct iw_statistics *)NULL;
8323 static struct iw_handler_def ipw2100_wx_handler_def = {
8324 .standard = ipw2100_wx_handlers,
8325 .num_standard = ARRAY_SIZE(ipw2100_wx_handlers),
8326 .num_private = ARRAY_SIZE(ipw2100_private_handler),
8327 .num_private_args = ARRAY_SIZE(ipw2100_private_args),
8328 .private = (iw_handler *) ipw2100_private_handler,
8329 .private_args = (struct iw_priv_args *)ipw2100_private_args,
8330 .get_wireless_stats = ipw2100_wx_wireless_stats,
8333 static void ipw2100_wx_event_work(struct work_struct *work)
8335 struct ipw2100_priv *priv =
8336 container_of(work, struct ipw2100_priv, wx_event_work.work);
8337 union iwreq_data wrqu;
8338 unsigned int len = ETH_ALEN;
8340 if (priv->status & STATUS_STOPPING)
8343 mutex_lock(&priv->action_mutex);
8345 IPW_DEBUG_WX("enter\n");
8347 mutex_unlock(&priv->action_mutex);
8349 wrqu.ap_addr.sa_family = ARPHRD_ETHER;
8351 /* Fetch BSSID from the hardware */
8352 if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
8353 priv->status & STATUS_RF_KILL_MASK ||
8354 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
8355 &priv->bssid, &len)) {
8356 memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
8358 /* We now have the BSSID, so can finish setting to the full
8359 * associated state */
8360 memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
8361 memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN);
8362 priv->status &= ~STATUS_ASSOCIATING;
8363 priv->status |= STATUS_ASSOCIATED;
8364 netif_carrier_on(priv->net_dev);
8365 netif_wake_queue(priv->net_dev);
8368 if (!(priv->status & STATUS_ASSOCIATED)) {
8369 IPW_DEBUG_WX("Configuring ESSID\n");
8370 mutex_lock(&priv->action_mutex);
8371 /* This is a disassociation event, so kick the firmware to
8372 * look for another AP */
8373 if (priv->config & CFG_STATIC_ESSID)
8374 ipw2100_set_essid(priv, priv->essid, priv->essid_len,
8377 ipw2100_set_essid(priv, NULL, 0, 0);
8378 mutex_unlock(&priv->action_mutex);
8381 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
8384 #define IPW2100_FW_MAJOR_VERSION 1
8385 #define IPW2100_FW_MINOR_VERSION 3
8387 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8388 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8390 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8391 IPW2100_FW_MAJOR_VERSION)
8393 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8394 "." __stringify(IPW2100_FW_MINOR_VERSION)
8396 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8400 BINARY FIRMWARE HEADER FORMAT
8404 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8407 C fw_len firmware data
8408 12 + fw_len uc_len microcode data
8412 struct ipw2100_fw_header {
8415 unsigned int fw_size;
8416 unsigned int uc_size;
8419 static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
8421 struct ipw2100_fw_header *h =
8422 (struct ipw2100_fw_header *)fw->fw_entry->data;
8424 if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
8425 printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
8426 "(detected version id of %u). "
8427 "See Documentation/networking/README.ipw2100\n",
8432 fw->version = h->version;
8433 fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
8434 fw->fw.size = h->fw_size;
8435 fw->uc.data = fw->fw.data + h->fw_size;
8436 fw->uc.size = h->uc_size;
8441 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
8442 struct ipw2100_fw *fw)
8447 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8448 priv->net_dev->name);
8450 switch (priv->ieee->iw_mode) {
8452 fw_name = IPW2100_FW_NAME("-i");
8454 #ifdef CONFIG_IPW2100_MONITOR
8455 case IW_MODE_MONITOR:
8456 fw_name = IPW2100_FW_NAME("-p");
8461 fw_name = IPW2100_FW_NAME("");
8465 rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
8468 printk(KERN_ERR DRV_NAME ": "
8469 "%s: Firmware '%s' not available or load failed.\n",
8470 priv->net_dev->name, fw_name);
8473 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data,
8474 fw->fw_entry->size);
8476 ipw2100_mod_firmware_load(fw);
8481 MODULE_FIRMWARE(IPW2100_FW_NAME("-i"));
8482 #ifdef CONFIG_IPW2100_MONITOR
8483 MODULE_FIRMWARE(IPW2100_FW_NAME("-p"));
8485 MODULE_FIRMWARE(IPW2100_FW_NAME(""));
8487 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
8488 struct ipw2100_fw *fw)
8491 release_firmware(fw->fw_entry);
8492 fw->fw_entry = NULL;
8495 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
8498 char ver[MAX_FW_VERSION_LEN];
8499 u32 len = MAX_FW_VERSION_LEN;
8502 /* firmware version is an ascii string (max len of 14) */
8503 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len))
8508 for (i = 0; i < len; i++)
8514 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
8518 u32 len = sizeof(ver);
8519 /* microcode version is a 32 bit integer */
8520 if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, &ver, &len))
8522 return snprintf(buf, max, "%08X", ver);
8526 * On exit, the firmware will have been freed from the fw list
8528 static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
8530 /* firmware is constructed of N contiguous entries, each entry is
8534 * 0 4 address to write to
8535 * 4 2 length of data run
8541 const unsigned char *firmware_data = fw->fw.data;
8542 unsigned int firmware_data_left = fw->fw.size;
8544 while (firmware_data_left > 0) {
8545 addr = *(u32 *) (firmware_data);
8547 firmware_data_left -= 4;
8549 len = *(u16 *) (firmware_data);
8551 firmware_data_left -= 2;
8554 printk(KERN_ERR DRV_NAME ": "
8555 "Invalid firmware run-length of %d bytes\n",
8560 write_nic_memory(priv->net_dev, addr, len, firmware_data);
8561 firmware_data += len;
8562 firmware_data_left -= len;
8568 struct symbol_alive_response {
8577 u16 clock_settle_time; // 1us LSB
8578 u16 powerup_settle_time; // 1us LSB
8579 u16 hop_settle_time; // 1us LSB
8580 u8 date[3]; // month, day, year
8581 u8 time[2]; // hours, minutes
8585 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
8586 struct ipw2100_fw *fw)
8588 struct net_device *dev = priv->net_dev;
8589 const unsigned char *microcode_data = fw->uc.data;
8590 unsigned int microcode_data_left = fw->uc.size;
8591 void __iomem *reg = priv->ioaddr;
8593 struct symbol_alive_response response;
8597 /* Symbol control */
8598 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8600 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8604 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8606 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8609 /* EN_CS_ACCESS bit to reset control store pointer */
8610 write_nic_byte(dev, 0x210000, 0x40);
8612 write_nic_byte(dev, 0x210000, 0x0);
8614 write_nic_byte(dev, 0x210000, 0x40);
8617 /* copy microcode from buffer into Symbol */
8619 while (microcode_data_left > 0) {
8620 write_nic_byte(dev, 0x210010, *microcode_data++);
8621 write_nic_byte(dev, 0x210010, *microcode_data++);
8622 microcode_data_left -= 2;
8625 /* EN_CS_ACCESS bit to reset the control store pointer */
8626 write_nic_byte(dev, 0x210000, 0x0);
8629 /* Enable System (Reg 0)
8630 * first enable causes garbage in RX FIFO */
8631 write_nic_byte(dev, 0x210000, 0x0);
8633 write_nic_byte(dev, 0x210000, 0x80);
8636 /* Reset External Baseband Reg */
8637 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8639 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8642 /* HW Config (Reg 5) */
8643 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8645 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8648 /* Enable System (Reg 0)
8649 * second enable should be OK */
8650 write_nic_byte(dev, 0x210000, 0x00); // clear enable system
8652 write_nic_byte(dev, 0x210000, 0x80); // set enable system
8654 /* check Symbol is enabled - upped this from 5 as it wasn't always
8655 * catching the update */
8656 for (i = 0; i < 10; i++) {
8659 /* check Dino is enabled bit */
8660 read_nic_byte(dev, 0x210000, &data);
8666 printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
8671 /* Get Symbol alive response */
8672 for (i = 0; i < 30; i++) {
8673 /* Read alive response structure */
8675 j < (sizeof(struct symbol_alive_response) >> 1); j++)
8676 read_nic_word(dev, 0x210004, ((u16 *) & response) + j);
8678 if ((response.cmd_id == 1) && (response.ucode_valid == 0x1))
8684 printk(KERN_ERR DRV_NAME
8685 ": %s: No response from Symbol - hw not alive\n",
8687 printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response));