drivers/net/wireless/iwlegacy/3945.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/slab.h>
  31 #include <linux/pci.h>
  32 #include <linux/dma-mapping.h>
  33 #include <linux/delay.h>
  34 #include <linux/sched.h>
  35 #include <linux/skbuff.h>
  36 #include <linux/netdevice.h>
  37 #include <linux/firmware.h>
  38 #include <linux/etherdevice.h>
  39 #include <asm/unaligned.h>
  40 #include <net/mac80211.h>
  41
  42 #include "common.h"
  43 #include "3945.h"
  44
  45 /* Send led command */
  46 static int
  47 il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd)
  48 {
  49         struct il_host_cmd cmd = {
  50                 .id = C_LEDS,
  51                 .len = sizeof(struct il_led_cmd),
  52                 .data = led_cmd,
  53                 .flags = CMD_ASYNC,
  54                 .callback = NULL,
  55         };
  56
  57         return il_send_cmd(il, &cmd);
  58 }
  59
  60 const struct il_led_ops il3945_led_ops = {
  61         .cmd = il3945_send_led_cmd,
  62 };
  63
  64 #define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
  65         [RATE_##r##M_IDX] = { RATE_##r##M_PLCP,   \
  66                                     RATE_##r##M_IEEE,   \
  67                                     RATE_##ip##M_IDX, \
  68                                     RATE_##in##M_IDX, \
  69                                     RATE_##rp##M_IDX, \
  70                                     RATE_##rn##M_IDX, \
  71                                     RATE_##pp##M_IDX, \
  72                                     RATE_##np##M_IDX, \
  73                                     RATE_##r##M_IDX_TBL, \
  74                                     RATE_##ip##M_IDX_TBL }
  75
  76 /*
  77  * Parameter order:
  78  *   rate, prev rate, next rate, prev tgg rate, next tgg rate
  79  *
  80  * If there isn't a valid next or previous rate then INV is used which
  81  * maps to RATE_INVALID
  82  *
  83  */
  84 const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
  85         IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),        /*  1mbps */
  86         IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),      /*  2mbps */
  87         IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),    /*5.5mbps */
  88         IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),  /* 11mbps */
  89         IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),    /*  6mbps */
  90         IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),   /*  9mbps */
  91         IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),       /* 12mbps */
  92         IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24),       /* 18mbps */
  93         IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36),       /* 24mbps */
  94         IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),       /* 36mbps */
  95         IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),       /* 48mbps */
  96         IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),    /* 54mbps */
  97 };
  98
  99 static inline u8
 100 il3945_get_prev_ieee_rate(u8 rate_idx)
 101 {
 102         u8 rate = il3945_rates[rate_idx].prev_ieee;
 103
 104         if (rate == RATE_INVALID)
 105                 rate = rate_idx;
 106         return rate;
 107 }
 108
 109 /* 1 = enable the il3945_disable_events() function */
 110 #define IL_EVT_DISABLE (0)
 111 #define IL_EVT_DISABLE_SIZE (1532/32)
 112
 113 /**
 114  * il3945_disable_events - Disable selected events in uCode event log
 115  *
 116  * Disable an event by writing "1"s into "disable"
 117  *   bitmap in SRAM.  Bit position corresponds to Event # (id/type).
 118  *   Default values of 0 enable uCode events to be logged.
 119  * Use for only special debugging.  This function is just a placeholder as-is,
 120  *   you'll need to provide the special bits! ...
 121  *   ... and set IL_EVT_DISABLE to 1. */
 122 void
 123 il3945_disable_events(struct il_priv *il)
 124 {
 125         int i;
 126         u32 base;               /* SRAM address of event log header */
 127         u32 disable_ptr;        /* SRAM address of event-disable bitmap array */
 128         u32 array_size;         /* # of u32 entries in array */
 129         static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = {
 130                 0x00000000,     /*   31 -    0  Event id numbers */
 131                 0x00000000,     /*   63 -   32 */
 132                 0x00000000,     /*   95 -   64 */
 133                 0x00000000,     /*  127 -   96 */
 134                 0x00000000,     /*  159 -  128 */
 135                 0x00000000,     /*  191 -  160 */
 136                 0x00000000,     /*  223 -  192 */
 137                 0x00000000,     /*  255 -  224 */
 138                 0x00000000,     /*  287 -  256 */
 139                 0x00000000,     /*  319 -  288 */
 140                 0x00000000,     /*  351 -  320 */
 141                 0x00000000,     /*  383 -  352 */
 142                 0x00000000,     /*  415 -  384 */
 143                 0x00000000,     /*  447 -  416 */
 144                 0x00000000,     /*  479 -  448 */
 145                 0x00000000,     /*  511 -  480 */
 146                 0x00000000,     /*  543 -  512 */
 147                 0x00000000,     /*  575 -  544 */
 148                 0x00000000,     /*  607 -  576 */
 149                 0x00000000,     /*  639 -  608 */
 150                 0x00000000,     /*  671 -  640 */
 151                 0x00000000,     /*  703 -  672 */
 152                 0x00000000,     /*  735 -  704 */
 153                 0x00000000,     /*  767 -  736 */
 154                 0x00000000,     /*  799 -  768 */
 155                 0x00000000,     /*  831 -  800 */
 156                 0x00000000,     /*  863 -  832 */
 157                 0x00000000,     /*  895 -  864 */
 158                 0x00000000,     /*  927 -  896 */
 159                 0x00000000,     /*  959 -  928 */
 160                 0x00000000,     /*  991 -  960 */
 161                 0x00000000,     /* 1023 -  992 */
 162                 0x00000000,     /* 1055 - 1024 */
 163                 0x00000000,     /* 1087 - 1056 */
 164                 0x00000000,     /* 1119 - 1088 */
 165                 0x00000000,     /* 1151 - 1120 */
 166                 0x00000000,     /* 1183 - 1152 */
 167                 0x00000000,     /* 1215 - 1184 */
 168                 0x00000000,     /* 1247 - 1216 */
 169                 0x00000000,     /* 1279 - 1248 */
 170                 0x00000000,     /* 1311 - 1280 */
 171                 0x00000000,     /* 1343 - 1312 */
 172                 0x00000000,     /* 1375 - 1344 */
 173                 0x00000000,     /* 1407 - 1376 */
 174                 0x00000000,     /* 1439 - 1408 */
 175                 0x00000000,     /* 1471 - 1440 */
 176                 0x00000000,     /* 1503 - 1472 */
 177         };
 178
 179         base = le32_to_cpu(il->card_alive.log_event_table_ptr);
 180         if (!il3945_hw_valid_rtc_data_addr(base)) {
 181                 IL_ERR("Invalid event log pointer 0x%08X\n", base);
 182                 return;
 183         }
 184
 185         disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32)));
 186         array_size = il_read_targ_mem(il, base + (5 * sizeof(u32)));
 187
 188         if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) {
 189                 D_INFO("Disabling selected uCode log events at 0x%x\n",
 190                        disable_ptr);
 191                 for (i = 0; i < IL_EVT_DISABLE_SIZE; i++)
 192                         il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)),
 193                                           evt_disable[i]);
 194
 195         } else {
 196                 D_INFO("Selected uCode log events may be disabled\n");
 197                 D_INFO("  by writing \"1\"s into disable bitmap\n");
 198                 D_INFO("  in SRAM at 0x%x, size %d u32s\n", disable_ptr,
 199                        array_size);
 200         }
 201
 202 }
 203
 204 static int
 205 il3945_hwrate_to_plcp_idx(u8 plcp)
 206 {
 207         int idx;
 208
 209         for (idx = 0; idx < RATE_COUNT_3945; idx++)
 210                 if (il3945_rates[idx].plcp == plcp)
 211                         return idx;
 212         return -1;
 213 }
 214
 215 #ifdef CONFIG_IWLEGACY_DEBUG
 216 #define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
 217
 218 static const char *
 219 il3945_get_tx_fail_reason(u32 status)
 220 {
 221         switch (status & TX_STATUS_MSK) {
 222         case TX_3945_STATUS_SUCCESS:
 223                 return "SUCCESS";
 224                 TX_STATUS_ENTRY(SHORT_LIMIT);
 225                 TX_STATUS_ENTRY(LONG_LIMIT);
 226                 TX_STATUS_ENTRY(FIFO_UNDERRUN);
 227                 TX_STATUS_ENTRY(MGMNT_ABORT);
 228                 TX_STATUS_ENTRY(NEXT_FRAG);
 229                 TX_STATUS_ENTRY(LIFE_EXPIRE);
 230                 TX_STATUS_ENTRY(DEST_PS);
 231                 TX_STATUS_ENTRY(ABORTED);
 232                 TX_STATUS_ENTRY(BT_RETRY);
 233                 TX_STATUS_ENTRY(STA_INVALID);
 234                 TX_STATUS_ENTRY(FRAG_DROPPED);
 235                 TX_STATUS_ENTRY(TID_DISABLE);
 236                 TX_STATUS_ENTRY(FRAME_FLUSHED);
 237                 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
 238                 TX_STATUS_ENTRY(TX_LOCKED);
 239                 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
 240         }
 241
 242         return "UNKNOWN";
 243 }
 244 #else
 245 static inline const char *
 246 il3945_get_tx_fail_reason(u32 status)
 247 {
 248         return "";
 249 }
 250 #endif
 251
 252 /*
 253  * get ieee prev rate from rate scale table.
 254  * for A and B mode we need to overright prev
 255  * value
 256  */
 257 int
 258 il3945_rs_next_rate(struct il_priv *il, int rate)
 259 {
 260         int next_rate = il3945_get_prev_ieee_rate(rate);
 261
 262         switch (il->band) {
 263         case IEEE80211_BAND_5GHZ:
 264                 if (rate == RATE_12M_IDX)
 265                         next_rate = RATE_9M_IDX;
 266                 else if (rate == RATE_6M_IDX)
 267                         next_rate = RATE_6M_IDX;
 268                 break;
 269         case IEEE80211_BAND_2GHZ:
 270                 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
 271                     il_is_associated(il)) {
 272                         if (rate == RATE_11M_IDX)
 273                                 next_rate = RATE_5M_IDX;
 274                 }
 275                 break;
 276
 277         default:
 278                 break;
 279         }
 280
 281         return next_rate;
 282 }
 283
 284 /**
 285  * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
 286  *
 287  * When FW advances 'R' idx, all entries between old and new 'R' idx
 288  * need to be reclaimed. As result, some free space forms. If there is
 289  * enough free space (> low mark), wake the stack that feeds us.
 290  */
 291 static void
 292 il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
 293 {
 294         struct il_tx_queue *txq = &il->txq[txq_id];
 295         struct il_queue *q = &txq->q;
 296         struct sk_buff *skb;
 297
 298         BUG_ON(txq_id == IL39_CMD_QUEUE_NUM);
 299
 300         for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
 301              q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 302
 303                 skb = txq->skbs[txq->q.read_ptr];
 304                 ieee80211_tx_status_irqsafe(il->hw, skb);
 305                 txq->skbs[txq->q.read_ptr] = NULL;
 306                 il->ops->lib->txq_free_tfd(il, txq);
 307         }
 308
 309         if (il_queue_space(q) > q->low_mark && txq_id >= 0 &&
 310             txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered)
 311                 il_wake_queue(il, txq);
 312 }
 313
 314 /**
 315  * il3945_hdl_tx - Handle Tx response
 316  */
 317 static void
 318 il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
 319 {
 320         struct il_rx_pkt *pkt = rxb_addr(rxb);
 321         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 322         int txq_id = SEQ_TO_QUEUE(sequence);
 323         int idx = SEQ_TO_IDX(sequence);
 324         struct il_tx_queue *txq = &il->txq[txq_id];
 325         struct ieee80211_tx_info *info;
 326         struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
 327         u32 status = le32_to_cpu(tx_resp->status);
 328         int rate_idx;
 329         int fail;
 330
 331         if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
 332                 IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
 333                        "is out of range [0-%d] %d %d\n", txq_id, idx,
 334                        txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
 335                 return;
 336         }
 337
 338         txq->time_stamp = jiffies;
 339         info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]);
 340         ieee80211_tx_info_clear_status(info);
 341
 342         /* Fill the MRR chain with some info about on-chip retransmissions */
 343         rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate);
 344         if (info->band == IEEE80211_BAND_5GHZ)
 345                 rate_idx -= IL_FIRST_OFDM_RATE;
 346
 347         fail = tx_resp->failure_frame;
 348
 349         info->status.rates[0].idx = rate_idx;
 350         info->status.rates[0].count = fail + 1; /* add final attempt */
 351
 352         /* tx_status->rts_retry_count = tx_resp->failure_rts; */
 353         info->flags |=
 354             ((status & TX_STATUS_MSK) ==
 355              TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0;
 356
 357         D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id,
 358              il3945_get_tx_fail_reason(status), status, tx_resp->rate,
 359              tx_resp->failure_frame);
 360
 361         D_TX_REPLY("Tx queue reclaim %d\n", idx);
 362         il3945_tx_queue_reclaim(il, txq_id, idx);
 363
 364         if (status & TX_ABORT_REQUIRED_MSK)
 365                 IL_ERR("TODO:  Implement Tx ABORT REQUIRED!!!\n");
 366 }
 367
 368 /*****************************************************************************
 369  *
 370  * Intel PRO/Wireless 3945ABG/BG Network Connection
 371  *
 372  *  RX handler implementations
 373  *
 374  *****************************************************************************/
 375 #ifdef CONFIG_IWLEGACY_DEBUGFS
 376 static void
 377 il3945_accumulative_stats(struct il_priv *il, __le32 * stats)
 378 {
 379         int i;
 380         __le32 *prev_stats;
 381         u32 *accum_stats;
 382         u32 *delta, *max_delta;
 383
 384         prev_stats = (__le32 *) &il->_3945.stats;
 385         accum_stats = (u32 *) &il->_3945.accum_stats;
 386         delta = (u32 *) &il->_3945.delta_stats;
 387         max_delta = (u32 *) &il->_3945.max_delta;
 388
 389         for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats);
 390              i +=
 391              sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
 392              accum_stats++) {
 393                 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
 394                         *delta =
 395                             (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
 396                         *accum_stats += *delta;
 397                         if (*delta > *max_delta)
 398                                 *max_delta = *delta;
 399                 }
 400         }
 401
 402         /* reset accumulative stats for "no-counter" type stats */
 403         il->_3945.accum_stats.general.temperature =
 404             il->_3945.stats.general.temperature;
 405         il->_3945.accum_stats.general.ttl_timestamp =
 406             il->_3945.stats.general.ttl_timestamp;
 407 }
 408 #endif
 409
 410 void
 411 il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
 412 {
 413         struct il_rx_pkt *pkt = rxb_addr(rxb);
 414
 415         D_RX("Statistics notification received (%d vs %d).\n",
 416              (int)sizeof(struct il3945_notif_stats),
 417              le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);
 418 #ifdef CONFIG_IWLEGACY_DEBUGFS
 419         il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw);
 420 #endif
 421
 422         memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats));
 423 }
 424
 425 void
 426 il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
 427 {
 428         struct il_rx_pkt *pkt = rxb_addr(rxb);
 429         __le32 *flag = (__le32 *) &pkt->u.raw;
 430
 431         if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) {
 432 #ifdef CONFIG_IWLEGACY_DEBUGFS
 433                 memset(&il->_3945.accum_stats, 0,
 434                        sizeof(struct il3945_notif_stats));
 435                 memset(&il->_3945.delta_stats, 0,
 436                        sizeof(struct il3945_notif_stats));
 437                 memset(&il->_3945.max_delta, 0,
 438                        sizeof(struct il3945_notif_stats));
 439 #endif
 440                 D_RX("Statistics have been cleared\n");
 441         }
 442         il3945_hdl_stats(il, rxb);
 443 }
 444
 445 /******************************************************************************
 446  *
 447  * Misc. internal state and helper functions
 448  *
 449  ******************************************************************************/
 450
 451 /* This is necessary only for a number of stats, see the caller. */
 452 static int
 453 il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header)
 454 {
 455         /* Filter incoming packets to determine if they are targeted toward
 456          * this network, discarding packets coming from ourselves */
 457         switch (il->iw_mode) {
 458         case NL80211_IFTYPE_ADHOC:      /* Header: Dest. | Source    | BSSID */
 459                 /* packets to our IBSS update information */
 460                 return !compare_ether_addr(header->addr3, il->bssid);
 461         case NL80211_IFTYPE_STATION:    /* Header: Dest. | AP{BSSID} | Source */
 462                 /* packets to our IBSS update information */
 463                 return !compare_ether_addr(header->addr2, il->bssid);
 464         default:
 465                 return 1;
 466         }
 467 }
 468
 469 static void
 470 il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
 471                                struct ieee80211_rx_status *stats)
 472 {
 473         struct il_rx_pkt *pkt = rxb_addr(rxb);
 474         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
 475         struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
 476         struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
 477         u16 len = le16_to_cpu(rx_hdr->len);
 478         struct sk_buff *skb;
 479         __le16 fc = hdr->frame_control;
 480
 481         /* We received data from the HW, so stop the watchdog */
 482         if (unlikely
 483             (len + IL39_RX_FRAME_SIZE >
 484              PAGE_SIZE << il->hw_params.rx_page_order)) {
 485                 D_DROP("Corruption detected!\n");
 486                 return;
 487         }
 488
 489         /* We only process data packets if the interface is open */
 490         if (unlikely(!il->is_open)) {
 491                 D_DROP("Dropping packet while interface is not open.\n");
 492                 return;
 493         }
 494
 495         skb = dev_alloc_skb(128);
 496         if (!skb) {
 497                 IL_ERR("dev_alloc_skb failed\n");
 498                 return;
 499         }
 500
 501         if (!il3945_mod_params.sw_crypto)
 502                 il_set_decrypted_flag(il, (struct ieee80211_hdr *)rxb_addr(rxb),
 503                                       le32_to_cpu(rx_end->status), stats);
 504
 505         skb_add_rx_frag(skb, 0, rxb->page,
 506                         (void *)rx_hdr->payload - (void *)pkt, len);
 507
 508         il_update_stats(il, false, fc, len);
 509         memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
 510
 511         ieee80211_rx(il->hw, skb);
 512         il->alloc_rxb_page--;
 513         rxb->page = NULL;
 514 }
 515
 516 #define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
 517
 518 static void
 519 il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
 520 {
 521         struct ieee80211_hdr *header;
 522         struct ieee80211_rx_status rx_status;
 523         struct il_rx_pkt *pkt = rxb_addr(rxb);
 524         struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt);
 525         struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
 526         struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
 527         u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
 528         u16 rx_stats_noise_diff __maybe_unused =
 529             le16_to_cpu(rx_stats->noise_diff);
 530         u8 network_packet;
 531
 532         rx_status.flag = 0;
 533         rx_status.mactime = le64_to_cpu(rx_end->timestamp);
 534         rx_status.band =
 535             (rx_hdr->
 536              phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? IEEE80211_BAND_2GHZ :
 537             IEEE80211_BAND_5GHZ;
 538         rx_status.freq =
 539             ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
 540                                            rx_status.band);
 541
 542         rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate);
 543         if (rx_status.band == IEEE80211_BAND_5GHZ)
 544                 rx_status.rate_idx -= IL_FIRST_OFDM_RATE;
 545
 546         rx_status.antenna =
 547             (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
 548             4;
 549
 550         /* set the preamble flag if appropriate */
 551         if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 552                 rx_status.flag |= RX_FLAG_SHORTPRE;
 553
 554         if ((unlikely(rx_stats->phy_count > 20))) {
 555                 D_DROP("dsp size out of range [0,20]: %d/n",
 556                        rx_stats->phy_count);
 557                 return;
 558         }
 559
 560         if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) ||
 561             !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
 562                 D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
 563                 return;
 564         }
 565
 566         /* Convert 3945's rssi indicator to dBm */
 567         rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET;
 568
 569         D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal,
 570                 rx_stats_sig_avg, rx_stats_noise_diff);
 571
 572         header = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
 573
 574         network_packet = il3945_is_network_packet(il, header);
 575
 576         D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
 577                 network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel),
 578                 rx_status.signal, rx_status.signal, rx_status.rate_idx);
 579
 580         il_dbg_log_rx_data_frame(il, le16_to_cpu(rx_hdr->len), header);
 581
 582         if (network_packet) {
 583                 il->_3945.last_beacon_time =
 584                     le32_to_cpu(rx_end->beacon_timestamp);
 585                 il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
 586                 il->_3945.last_rx_rssi = rx_status.signal;
 587         }
 588
 589         il3945_pass_packet_to_mac80211(il, rxb, &rx_status);
 590 }
 591
 592 int
 593 il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
 594                                 dma_addr_t addr, u16 len, u8 reset, u8 pad)
 595 {
 596         int count;
 597         struct il_queue *q;
 598         struct il3945_tfd *tfd, *tfd_tmp;
 599
 600         q = &txq->q;
 601         tfd_tmp = (struct il3945_tfd *)txq->tfds;
 602         tfd = &tfd_tmp[q->write_ptr];
 603
 604         if (reset)
 605                 memset(tfd, 0, sizeof(*tfd));
 606
 607         count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
 608
 609         if (count >= NUM_TFD_CHUNKS || count < 0) {
 610                 IL_ERR("Error can not send more than %d chunks\n",
 611                        NUM_TFD_CHUNKS);
 612                 return -EINVAL;
 613         }
 614
 615         tfd->tbs[count].addr = cpu_to_le32(addr);
 616         tfd->tbs[count].len = cpu_to_le32(len);
 617
 618         count++;
 619
 620         tfd->control_flags =
 621             cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad));
 622
 623         return 0;
 624 }
 625
 626 /**
 627  * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr]
 628  *
 629  * Does NOT advance any idxes
 630  */
 631 void
 632 il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
 633 {
 634         struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds;
 635         int idx = txq->q.read_ptr;
 636         struct il3945_tfd *tfd = &tfd_tmp[idx];
 637         struct pci_dev *dev = il->pci_dev;
 638         int i;
 639         int counter;
 640
 641         /* sanity check */
 642         counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
 643         if (counter > NUM_TFD_CHUNKS) {
 644                 IL_ERR("Too many chunks: %i\n", counter);
 645                 /* @todo issue fatal error, it is quite serious situation */
 646                 return;
 647         }
 648
 649         /* Unmap tx_cmd */
 650         if (counter)
 651                 pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping),
 652                                  dma_unmap_len(&txq->meta[idx], len),
 653                                  PCI_DMA_TODEVICE);
 654
 655         /* unmap chunks if any */
 656
 657         for (i = 1; i < counter; i++)
 658                 pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
 659                                  le32_to_cpu(tfd->tbs[i].len),
 660                                  PCI_DMA_TODEVICE);
 661
 662         /* free SKB */
 663         if (txq->skbs) {
 664                 struct sk_buff *skb = txq->skbs[txq->q.read_ptr];
 665
 666                 /* can be called from irqs-disabled context */
 667                 if (skb) {
 668                         dev_kfree_skb_any(skb);
 669                         txq->skbs[txq->q.read_ptr] = NULL;
 670                 }
 671         }
 672 }
 673
 674 /**
 675  * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
 676  *
 677 */
 678 void
 679 il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd,
 680                             struct ieee80211_tx_info *info,
 681                             struct ieee80211_hdr *hdr, int sta_id)
 682 {
 683         u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
 684         u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1);
 685         u16 rate_mask;
 686         int rate;
 687         const u8 rts_retry_limit = 7;
 688         u8 data_retry_limit;
 689         __le32 tx_flags;
 690         __le16 fc = hdr->frame_control;
 691         struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
 692
 693         rate = il3945_rates[rate_idx].plcp;
 694         tx_flags = tx_cmd->tx_flags;
 695
 696         /* We need to figure out how to get the sta->supp_rates while
 697          * in this running context */
 698         rate_mask = RATES_MASK_3945;
 699
 700         /* Set retry limit on DATA packets and Probe Responses */
 701         if (ieee80211_is_probe_resp(fc))
 702                 data_retry_limit = 3;
 703         else
 704                 data_retry_limit = IL_DEFAULT_TX_RETRY;
 705         tx_cmd->data_retry_limit = data_retry_limit;
 706         /* Set retry limit on RTS packets */
 707         tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);
 708
 709         tx_cmd->rate = rate;
 710         tx_cmd->tx_flags = tx_flags;
 711
 712         /* OFDM */
 713         tx_cmd->supp_rates[0] =
 714             ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF;
 715
 716         /* CCK */
 717         tx_cmd->supp_rates[1] = (rate_mask & 0xF);
 718
 719         D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 720                "cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate,
 721                le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1],
 722                tx_cmd->supp_rates[0]);
 723 }
 724
 725 static u8
 726 il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate)
 727 {
 728         unsigned long flags_spin;
 729         struct il_station_entry *station;
 730
 731         if (sta_id == IL_INVALID_STATION)
 732                 return IL_INVALID_STATION;
 733
 734         spin_lock_irqsave(&il->sta_lock, flags_spin);
 735         station = &il->stations[sta_id];
 736
 737         station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
 738         station->sta.rate_n_flags = cpu_to_le16(tx_rate);
 739         station->sta.mode = STA_CONTROL_MODIFY_MSK;
 740         il_send_add_sta(il, &station->sta, CMD_ASYNC);
 741         spin_unlock_irqrestore(&il->sta_lock, flags_spin);
 742
 743         D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate);
 744         return sta_id;
 745 }
 746
 747 static void
 748 il3945_set_pwr_vmain(struct il_priv *il)
 749 {
 750 /*
 751  * (for documentation purposes)
 752  * to set power to V_AUX, do
 753
 754                 if (pci_pme_capable(il->pci_dev, PCI_D3cold)) {
 755                         il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
 756                                         APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 757                                         ~APMG_PS_CTRL_MSK_PWR_SRC);
 758
 759                         _il_poll_bit(il, CSR_GPIO_IN,
 760                                      CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
 761                                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);
 762                 }
 763  */
 764
 765         il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
 766                               APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 767                               ~APMG_PS_CTRL_MSK_PWR_SRC);
 768
 769         _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
 770                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);
 771 }
 772
 773 static int
 774 il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
 775 {
 776         il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
 777         il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
 778         il_wr(il, FH39_RCSR_WPTR(0), 0);
 779         il_wr(il, FH39_RCSR_CONFIG(0),
 780               FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
 781               FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
 782               FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
 783               FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG
 784                                                                <<
 785                                                                FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE)
 786               | FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 <<
 787                                                                  FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH)
 788               | FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
 789
 790         /* fake read to flush all prev I/O */
 791         il_rd(il, FH39_RSSR_CTRL);
 792
 793         return 0;
 794 }
 795
 796 static int
 797 il3945_tx_reset(struct il_priv *il)
 798 {
 799
 800         /* bypass mode */
 801         il_wr_prph(il, ALM_SCD_MODE_REG, 0x2);
 802
 803         /* RA 0 is active */
 804         il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
 805
 806         /* all 6 fifo are active */
 807         il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
 808
 809         il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
 810         il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
 811         il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
 812         il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
 813
 814         il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys);
 815
 816         il_wr(il, FH39_TSSR_MSG_CONFIG,
 817               FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
 818               FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
 819               FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
 820               FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
 821               FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
 822               FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
 823               FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
 824
 825         return 0;
 826 }
 827
 828 /**
 829  * il3945_txq_ctx_reset - Reset TX queue context
 830  *
 831  * Destroys all DMA structures and initialize them again
 832  */
 833 static int
 834 il3945_txq_ctx_reset(struct il_priv *il)
 835 {
 836         int rc;
 837         int txq_id, slots_num;
 838
 839         il3945_hw_txq_ctx_free(il);
 840
 841         /* allocate tx queue structure */
 842         rc = il_alloc_txq_mem(il);
 843         if (rc)
 844                 return rc;
 845
 846         /* Tx CMD queue */
 847         rc = il3945_tx_reset(il);
 848         if (rc)
 849                 goto error;
 850
 851         /* Tx queue(s) */
 852         for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
 853                 slots_num =
 854                     (txq_id ==
 855                      IL39_CMD_QUEUE_NUM) ? TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
 856                 rc = il_tx_queue_init(il, &il->txq[txq_id], slots_num, txq_id);
 857                 if (rc) {
 858                         IL_ERR("Tx %d queue init failed\n", txq_id);
 859                         goto error;
 860                 }
 861         }
 862
 863         return rc;
 864
 865 error:
 866         il3945_hw_txq_ctx_free(il);
 867         return rc;
 868 }
 869
 870 /*
 871  * Start up 3945's basic functionality after it has been reset
 872  * (e.g. after platform boot, or shutdown via il_apm_stop())
 873  * NOTE:  This does not load uCode nor start the embedded processor
 874  */
 875 static int
 876 il3945_apm_init(struct il_priv *il)
 877 {
 878         int ret = il_apm_init(il);
 879
 880         /* Clear APMG (NIC's internal power management) interrupts */
 881         il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
 882         il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
 883
 884         /* Reset radio chip */
 885         il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
 886         udelay(5);
 887         il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
 888
 889         return ret;
 890 }
 891
 892 static void
 893 il3945_nic_config(struct il_priv *il)
 894 {
 895         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
 896         unsigned long flags;
 897         u8 rev_id = il->pci_dev->revision;
 898
 899         spin_lock_irqsave(&il->lock, flags);
 900
 901         /* Determine HW type */
 902         D_INFO("HW Revision ID = 0x%X\n", rev_id);
 903
 904         if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
 905                 D_INFO("RTP type\n");
 906         else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
 907                 D_INFO("3945 RADIO-MB type\n");
 908                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 909                            CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
 910         } else {
 911                 D_INFO("3945 RADIO-MM type\n");
 912                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 913                            CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
 914         }
 915
 916         if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
 917                 D_INFO("SKU OP mode is mrc\n");
 918                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 919                            CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
 920         } else
 921                 D_INFO("SKU OP mode is basic\n");
 922
 923         if ((eeprom->board_revision & 0xF0) == 0xD0) {
 924                 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
 925                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 926                            CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
 927         } else {
 928                 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
 929                 il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
 930                              CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
 931         }
 932
 933         if (eeprom->almgor_m_version <= 1) {
 934                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 935                            CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
 936                 D_INFO("Card M type A version is 0x%X\n",
 937                        eeprom->almgor_m_version);
 938         } else {
 939                 D_INFO("Card M type B version is 0x%X\n",
 940                        eeprom->almgor_m_version);
 941                 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
 942                            CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
 943         }
 944         spin_unlock_irqrestore(&il->lock, flags);
 945
 946         if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
 947                 D_RF_KILL("SW RF KILL supported in EEPROM.\n");
 948
 949         if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
 950                 D_RF_KILL("HW RF KILL supported in EEPROM.\n");
 951 }
 952
 953 int
 954 il3945_hw_nic_init(struct il_priv *il)
 955 {
 956         int rc;
 957         unsigned long flags;
 958         struct il_rx_queue *rxq = &il->rxq;
 959
 960         spin_lock_irqsave(&il->lock, flags);
 961         il->ops->lib->apm_ops.init(il);
 962         spin_unlock_irqrestore(&il->lock, flags);
 963
 964         il3945_set_pwr_vmain(il);
 965
 966         il->ops->lib->apm_ops.config(il);
 967
 968         /* Allocate the RX queue, or reset if it is already allocated */
 969         if (!rxq->bd) {
 970                 rc = il_rx_queue_alloc(il);
 971                 if (rc) {
 972                         IL_ERR("Unable to initialize Rx queue\n");
 973                         return -ENOMEM;
 974                 }
 975         } else
 976                 il3945_rx_queue_reset(il, rxq);
 977
 978         il3945_rx_replenish(il);
 979
 980         il3945_rx_init(il, rxq);
 981
 982         /* Look at using this instead:
 983            rxq->need_update = 1;
 984            il_rx_queue_update_write_ptr(il, rxq);
 985          */
 986
 987         il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7);
 988
 989         rc = il3945_txq_ctx_reset(il);
 990         if (rc)
 991                 return rc;
 992
 993         set_bit(S_INIT, &il->status);
 994
 995         return 0;
 996 }
 997
 998 /**
 999  * il3945_hw_txq_ctx_free - Free TXQ Context
1000  *
1001  * Destroy all TX DMA queues and structures
1002  */
1003 void
1004 il3945_hw_txq_ctx_free(struct il_priv *il)
1005 {
1006         int txq_id;
1007
1008         /* Tx queues */
1009         if (il->txq)
1010                 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
1011                         if (txq_id == IL39_CMD_QUEUE_NUM)
1012                                 il_cmd_queue_free(il);
1013                         else
1014                                 il_tx_queue_free(il, txq_id);
1015
1016         /* free tx queue structure */
1017         il_txq_mem(il);
1018 }
1019
1020 void
1021 il3945_hw_txq_ctx_stop(struct il_priv *il)
1022 {
1023         int txq_id;
1024
1025         /* stop SCD */
1026         il_wr_prph(il, ALM_SCD_MODE_REG, 0);
1027         il_wr_prph(il, ALM_SCD_TXFACT_REG, 0);
1028
1029         /* reset TFD queues */
1030         for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
1031                 il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0);
1032                 il_poll_bit(il, FH39_TSSR_TX_STATUS,
1033                             FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1034                             1000);
1035         }
1036
1037         il3945_hw_txq_ctx_free(il);
1038 }
1039
1040 /**
1041  * il3945_hw_reg_adjust_power_by_temp
1042  * return idx delta into power gain settings table
1043 */
1044 static int
1045 il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1046 {
1047         return (new_reading - old_reading) * (-11) / 100;
1048 }
1049
1050 /**
1051  * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1052  */
1053 static inline int
1054 il3945_hw_reg_temp_out_of_range(int temperature)
1055 {
1056         return (temperature < -260 || temperature > 25) ? 1 : 0;
1057 }
1058
1059 int
1060 il3945_hw_get_temperature(struct il_priv *il)
1061 {
1062         return _il_rd(il, CSR_UCODE_DRV_GP2);
1063 }
1064
1065 /**
1066  * il3945_hw_reg_txpower_get_temperature
1067  * get the current temperature by reading from NIC
1068 */
1069 static int
1070 il3945_hw_reg_txpower_get_temperature(struct il_priv *il)
1071 {
1072         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1073         int temperature;
1074
1075         temperature = il3945_hw_get_temperature(il);
1076
1077         /* driver's okay range is -260 to +25.
1078          *   human readable okay range is 0 to +285 */
1079         D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT);
1080
1081         /* handle insane temp reading */
1082         if (il3945_hw_reg_temp_out_of_range(temperature)) {
1083                 IL_ERR("Error bad temperature value  %d\n", temperature);
1084
1085                 /* if really really hot(?),
1086                  *   substitute the 3rd band/group's temp measured at factory */
1087                 if (il->last_temperature > 100)
1088                         temperature = eeprom->groups[2].temperature;
1089                 else            /* else use most recent "sane" value from driver */
1090                         temperature = il->last_temperature;
1091         }
1092
1093         return temperature;     /* raw, not "human readable" */
1094 }
1095
1096 /* Adjust Txpower only if temperature variance is greater than threshold.
1097  *
1098  * Both are lower than older versions' 9 degrees */
1099 #define IL_TEMPERATURE_LIMIT_TIMER   6
1100
1101 /**
1102  * il3945_is_temp_calib_needed - determines if new calibration is needed
1103  *
1104  * records new temperature in tx_mgr->temperature.
1105  * replaces tx_mgr->last_temperature *only* if calib needed
1106  *    (assumes caller will actually do the calibration!). */
1107 static int
1108 il3945_is_temp_calib_needed(struct il_priv *il)
1109 {
1110         int temp_diff;
1111
1112         il->temperature = il3945_hw_reg_txpower_get_temperature(il);
1113         temp_diff = il->temperature - il->last_temperature;
1114
1115         /* get absolute value */
1116         if (temp_diff < 0) {
1117                 D_POWER("Getting cooler, delta %d,\n", temp_diff);
1118                 temp_diff = -temp_diff;
1119         } else if (temp_diff == 0)
1120                 D_POWER("Same temp,\n");
1121         else
1122                 D_POWER("Getting warmer, delta %d,\n", temp_diff);
1123
1124         /* if we don't need calibration, *don't* update last_temperature */
1125         if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) {
1126                 D_POWER("Timed thermal calib not needed\n");
1127                 return 0;
1128         }
1129
1130         D_POWER("Timed thermal calib needed\n");
1131
1132         /* assume that caller will actually do calib ...
1133          *   update the "last temperature" value */
1134         il->last_temperature = il->temperature;
1135         return 1;
1136 }
1137
1138 #define IL_MAX_GAIN_ENTRIES 78
1139 #define IL_CCK_FROM_OFDM_POWER_DIFF  -5
1140 #define IL_CCK_FROM_OFDM_IDX_DIFF (10)
1141
1142 /* radio and DSP power table, each step is 1/2 dB.
1143  * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1144 static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = {
1145         {
1146          {251, 127},            /* 2.4 GHz, highest power */
1147          {251, 127},
1148          {251, 127},
1149          {251, 127},
1150          {251, 125},
1151          {251, 110},
1152          {251, 105},
1153          {251, 98},
1154          {187, 125},
1155          {187, 115},
1156          {187, 108},
1157          {187, 99},
1158          {243, 119},
1159          {243, 111},
1160          {243, 105},
1161          {243, 97},
1162          {243, 92},
1163          {211, 106},
1164          {211, 100},
1165          {179, 120},
1166          {179, 113},
1167          {179, 107},
1168          {147, 125},
1169          {147, 119},
1170          {147, 112},
1171          {147, 106},
1172          {147, 101},
1173          {147, 97},
1174          {147, 91},
1175          {115, 107},
1176          {235, 121},
1177          {235, 115},
1178          {235, 109},
1179          {203, 127},
1180          {203, 121},
1181          {203, 115},
1182          {203, 108},
1183          {203, 102},
1184          {203, 96},
1185          {203, 92},
1186          {171, 110},
1187          {171, 104},
1188          {171, 98},
1189          {139, 116},
1190          {227, 125},
1191          {227, 119},
1192          {227, 113},
1193          {227, 107},
1194          {227, 101},
1195          {227, 96},
1196          {195, 113},
1197          {195, 106},
1198          {195, 102},
1199          {195, 95},
1200          {163, 113},
1201          {163, 106},
1202          {163, 102},
1203          {163, 95},
1204          {131, 113},
1205          {131, 106},
1206          {131, 102},
1207          {131, 95},
1208          {99, 113},
1209          {99, 106},
1210          {99, 102},
1211          {99, 95},
1212          {67, 113},
1213          {67, 106},
1214          {67, 102},
1215          {67, 95},
1216          {35, 113},
1217          {35, 106},
1218          {35, 102},
1219          {35, 95},
1220          {3, 113},
1221          {3, 106},
1222          {3, 102},
1223          {3, 95}                /* 2.4 GHz, lowest power */
1224         },
1225         {
1226          {251, 127},            /* 5.x GHz, highest power */
1227          {251, 120},
1228          {251, 114},
1229          {219, 119},
1230          {219, 101},
1231          {187, 113},
1232          {187, 102},
1233          {155, 114},
1234          {155, 103},
1235          {123, 117},
1236          {123, 107},
1237          {123, 99},
1238          {123, 92},
1239          {91, 108},
1240          {59, 125},
1241          {59, 118},
1242          {59, 109},
1243          {59, 102},
1244          {59, 96},
1245          {59, 90},
1246          {27, 104},
1247          {27, 98},
1248          {27, 92},
1249          {115, 118},
1250          {115, 111},
1251          {115, 104},
1252          {83, 126},
1253          {83, 121},
1254          {83, 113},
1255          {83, 105},
1256          {83, 99},
1257          {51, 118},
1258          {51, 111},
1259          {51, 104},
1260          {51, 98},
1261          {19, 116},
1262          {19, 109},
1263          {19, 102},
1264          {19, 98},
1265          {19, 93},
1266          {171, 113},
1267          {171, 107},
1268          {171, 99},
1269          {139, 120},
1270          {139, 113},
1271          {139, 107},
1272          {139, 99},
1273          {107, 120},
1274          {107, 113},
1275          {107, 107},
1276          {107, 99},
1277          {75, 120},
1278          {75, 113},
1279          {75, 107},
1280          {75, 99},
1281          {43, 120},
1282          {43, 113},
1283          {43, 107},
1284          {43, 99},
1285          {11, 120},
1286          {11, 113},
1287          {11, 107},
1288          {11, 99},
1289          {131, 107},
1290          {131, 99},
1291          {99, 120},
1292          {99, 113},
1293          {99, 107},
1294          {99, 99},
1295          {67, 120},
1296          {67, 113},
1297          {67, 107},
1298          {67, 99},
1299          {35, 120},
1300          {35, 113},
1301          {35, 107},
1302          {35, 99},
1303          {3, 120}               /* 5.x GHz, lowest power */
1304         }
1305 };
1306
1307 static inline u8
1308 il3945_hw_reg_fix_power_idx(int idx)
1309 {
1310         if (idx < 0)
1311                 return 0;
1312         if (idx >= IL_MAX_GAIN_ENTRIES)
1313                 return IL_MAX_GAIN_ENTRIES - 1;
1314         return (u8) idx;
1315 }
1316
1317 /* Kick off thermal recalibration check every 60 seconds */
1318 #define REG_RECALIB_PERIOD (60)
1319
1320 /**
1321  * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1322  *
1323  * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1324  * or 6 Mbit (OFDM) rates.
1325  */
1326 static void
1327 il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx,
1328                              const s8 *clip_pwrs,
1329                              struct il_channel_info *ch_info, int band_idx)
1330 {
1331         struct il3945_scan_power_info *scan_power_info;
1332         s8 power;
1333         u8 power_idx;
1334
1335         scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx];
1336
1337         /* use this channel group's 6Mbit clipping/saturation pwr,
1338          *   but cap at regulatory scan power restriction (set during init
1339          *   based on eeprom channel data) for this channel.  */
1340         power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]);
1341
1342         power = min(power, il->tx_power_user_lmt);
1343         scan_power_info->requested_power = power;
1344
1345         /* find difference between new scan *power* and current "normal"
1346          *   Tx *power* for 6Mb.  Use this difference (x2) to adjust the
1347          *   current "normal" temperature-compensated Tx power *idx* for
1348          *   this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1349          *   *idx*. */
1350         power_idx =
1351             ch_info->power_info[rate_idx].power_table_idx - (power -
1352                                                              ch_info->
1353                                                              power_info
1354                                                              [RATE_6M_IDX_TBL].
1355                                                              requested_power) *
1356             2;
1357
1358         /* store reference idx that we use when adjusting *all* scan
1359          *   powers.  So we can accommodate user (all channel) or spectrum
1360          *   management (single channel) power changes "between" temperature
1361          *   feedback compensation procedures.
1362          * don't force fit this reference idx into gain table; it may be a
1363          *   negative number.  This will help avoid errors when we're at
1364          *   the lower bounds (highest gains, for warmest temperatures)
1365          *   of the table. */
1366
1367         /* don't exceed table bounds for "real" setting */
1368         power_idx = il3945_hw_reg_fix_power_idx(power_idx);
1369
1370         scan_power_info->power_table_idx = power_idx;
1371         scan_power_info->tpc.tx_gain =
1372             power_gain_table[band_idx][power_idx].tx_gain;
1373         scan_power_info->tpc.dsp_atten =
1374             power_gain_table[band_idx][power_idx].dsp_atten;
1375 }
1376
1377 /**
1378  * il3945_send_tx_power - fill in Tx Power command with gain settings
1379  *
1380  * Configures power settings for all rates for the current channel,
1381  * using values from channel info struct, and send to NIC
1382  */
1383 static int
1384 il3945_send_tx_power(struct il_priv *il)
1385 {
1386         int rate_idx, i;
1387         const struct il_channel_info *ch_info = NULL;
1388         struct il3945_txpowertable_cmd txpower = {
1389                 .channel = il->active.channel,
1390         };
1391         u16 chan;
1392
1393         if (WARN_ONCE
1394             (test_bit(S_SCAN_HW, &il->status),
1395              "TX Power requested while scanning!\n"))
1396                 return -EAGAIN;
1397
1398         chan = le16_to_cpu(il->active.channel);
1399
1400         txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1401         ch_info = il_get_channel_info(il, il->band, chan);
1402         if (!ch_info) {
1403                 IL_ERR("Failed to get channel info for channel %d [%d]\n", chan,
1404                        il->band);
1405                 return -EINVAL;
1406         }
1407
1408         if (!il_is_channel_valid(ch_info)) {
1409                 D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n");
1410                 return 0;
1411         }
1412
1413         /* fill cmd with power settings for all rates for current channel */
1414         /* Fill OFDM rate */
1415         for (rate_idx = IL_FIRST_OFDM_RATE, i = 0;
1416              rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) {
1417
1418                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1419                 txpower.power[i].rate = il3945_rates[rate_idx].plcp;
1420
1421                 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1422                         le16_to_cpu(txpower.channel), txpower.band,
1423                         txpower.power[i].tpc.tx_gain,
1424                         txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
1425         }
1426         /* Fill CCK rates */
1427         for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE;
1428              rate_idx++, i++) {
1429                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1430                 txpower.power[i].rate = il3945_rates[rate_idx].plcp;
1431
1432                 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1433                         le16_to_cpu(txpower.channel), txpower.band,
1434                         txpower.power[i].tpc.tx_gain,
1435                         txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
1436         }
1437
1438         return il_send_cmd_pdu(il, C_TX_PWR_TBL,
1439                                sizeof(struct il3945_txpowertable_cmd),
1440                                &txpower);
1441
1442 }
1443
1444 /**
1445  * il3945_hw_reg_set_new_power - Configures power tables at new levels
1446  * @ch_info: Channel to update.  Uses power_info.requested_power.
1447  *
1448  * Replace requested_power and base_power_idx ch_info fields for
1449  * one channel.
1450  *
1451  * Called if user or spectrum management changes power preferences.
1452  * Takes into account h/w and modulation limitations (clip power).
1453  *
1454  * This does *not* send anything to NIC, just sets up ch_info for one channel.
1455  *
1456  * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1457  *       properly fill out the scan powers, and actual h/w gain settings,
1458  *       and send changes to NIC
1459  */
1460 static int
1461 il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info)
1462 {
1463         struct il3945_channel_power_info *power_info;
1464         int power_changed = 0;
1465         int i;
1466         const s8 *clip_pwrs;
1467         int power;
1468
1469         /* Get this chnlgrp's rate-to-max/clip-powers table */
1470         clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
1471
1472         /* Get this channel's rate-to-current-power settings table */
1473         power_info = ch_info->power_info;
1474
1475         /* update OFDM Txpower settings */
1476         for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) {
1477                 int delta_idx;
1478
1479                 /* limit new power to be no more than h/w capability */
1480                 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1481                 if (power == power_info->requested_power)
1482                         continue;
1483
1484                 /* find difference between old and new requested powers,
1485                  *    update base (non-temp-compensated) power idx */
1486                 delta_idx = (power - power_info->requested_power) * 2;
1487                 power_info->base_power_idx -= delta_idx;
1488
1489                 /* save new requested power value */
1490                 power_info->requested_power = power;
1491
1492                 power_changed = 1;
1493         }
1494
1495         /* update CCK Txpower settings, based on OFDM 12M setting ...
1496          *    ... all CCK power settings for a given channel are the *same*. */
1497         if (power_changed) {
1498                 power =
1499                     ch_info->power_info[RATE_12M_IDX_TBL].requested_power +
1500                     IL_CCK_FROM_OFDM_POWER_DIFF;
1501
1502                 /* do all CCK rates' il3945_channel_power_info structures */
1503                 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) {
1504                         power_info->requested_power = power;
1505                         power_info->base_power_idx =
1506                             ch_info->power_info[RATE_12M_IDX_TBL].
1507                             base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
1508                         ++power_info;
1509                 }
1510         }
1511
1512         return 0;
1513 }
1514
1515 /**
1516  * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1517  *
1518  * NOTE: Returned power limit may be less (but not more) than requested,
1519  *       based strictly on regulatory (eeprom and spectrum mgt) limitations
1520  *       (no consideration for h/w clipping limitations).
1521  */
1522 static int
1523 il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info)
1524 {
1525         s8 max_power;
1526
1527 #if 0
1528         /* if we're using TGd limits, use lower of TGd or EEPROM */
1529         if (ch_info->tgd_data.max_power != 0)
1530                 max_power =
1531                     min(ch_info->tgd_data.max_power,
1532                         ch_info->eeprom.max_power_avg);
1533
1534         /* else just use EEPROM limits */
1535         else
1536 #endif
1537                 max_power = ch_info->eeprom.max_power_avg;
1538
1539         return min(max_power, ch_info->max_power_avg);
1540 }
1541
1542 /**
1543  * il3945_hw_reg_comp_txpower_temp - Compensate for temperature
1544  *
1545  * Compensate txpower settings of *all* channels for temperature.
1546  * This only accounts for the difference between current temperature
1547  *   and the factory calibration temperatures, and bases the new settings
1548  *   on the channel's base_power_idx.
1549  *
1550  * If RxOn is "associated", this sends the new Txpower to NIC!
1551  */
1552 static int
1553 il3945_hw_reg_comp_txpower_temp(struct il_priv *il)
1554 {
1555         struct il_channel_info *ch_info = NULL;
1556         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1557         int delta_idx;
1558         const s8 *clip_pwrs;    /* array of h/w max power levels for each rate */
1559         u8 a_band;
1560         u8 rate_idx;
1561         u8 scan_tbl_idx;
1562         u8 i;
1563         int ref_temp;
1564         int temperature = il->temperature;
1565
1566         if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) {
1567                 /* do not perform tx power calibration */
1568                 return 0;
1569         }
1570         /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1571         for (i = 0; i < il->channel_count; i++) {
1572                 ch_info = &il->channel_info[i];
1573                 a_band = il_is_channel_a_band(ch_info);
1574
1575                 /* Get this chnlgrp's factory calibration temperature */
1576                 ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature;
1577
1578                 /* get power idx adjustment based on current and factory
1579                  * temps */
1580                 delta_idx =
1581                     il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp);
1582
1583                 /* set tx power value for all rates, OFDM and CCK */
1584                 for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) {
1585                         int power_idx =
1586                             ch_info->power_info[rate_idx].base_power_idx;
1587
1588                         /* temperature compensate */
1589                         power_idx += delta_idx;
1590
1591                         /* stay within table range */
1592                         power_idx = il3945_hw_reg_fix_power_idx(power_idx);
1593                         ch_info->power_info[rate_idx].power_table_idx =
1594                             (u8) power_idx;
1595                         ch_info->power_info[rate_idx].tpc =
1596                             power_gain_table[a_band][power_idx];
1597                 }
1598
1599                 /* Get this chnlgrp's rate-to-max/clip-powers table */
1600                 clip_pwrs =
1601                     il->_3945.clip_groups[ch_info->group_idx].clip_powers;
1602
1603                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1604                 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
1605                      scan_tbl_idx++) {
1606                         s32 actual_idx =
1607                             (scan_tbl_idx ==
1608                              0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
1609                         il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
1610                                                      actual_idx, clip_pwrs,
1611                                                      ch_info, a_band);
1612                 }
1613         }
1614
1615         /* send Txpower command for current channel to ucode */
1616         return il->ops->lib->send_tx_power(il);
1617 }
1618
1619 int
1620 il3945_hw_reg_set_txpower(struct il_priv *il, s8 power)
1621 {
1622         struct il_channel_info *ch_info;
1623         s8 max_power;
1624         u8 a_band;
1625         u8 i;
1626
1627         if (il->tx_power_user_lmt == power) {
1628                 D_POWER("Requested Tx power same as current " "limit: %ddBm.\n",
1629                         power);
1630                 return 0;
1631         }
1632
1633         D_POWER("Setting upper limit clamp to %ddBm.\n", power);
1634         il->tx_power_user_lmt = power;
1635
1636         /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1637
1638         for (i = 0; i < il->channel_count; i++) {
1639                 ch_info = &il->channel_info[i];
1640                 a_band = il_is_channel_a_band(ch_info);
1641
1642                 /* find minimum power of all user and regulatory constraints
1643                  *    (does not consider h/w clipping limitations) */
1644                 max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info);
1645                 max_power = min(power, max_power);
1646                 if (max_power != ch_info->curr_txpow) {
1647                         ch_info->curr_txpow = max_power;
1648
1649                         /* this considers the h/w clipping limitations */
1650                         il3945_hw_reg_set_new_power(il, ch_info);
1651                 }
1652         }
1653
1654         /* update txpower settings for all channels,
1655          *   send to NIC if associated. */
1656         il3945_is_temp_calib_needed(il);
1657         il3945_hw_reg_comp_txpower_temp(il);
1658
1659         return 0;
1660 }
1661
1662 static int
1663 il3945_send_rxon_assoc(struct il_priv *il)
1664 {
1665         int rc = 0;
1666         struct il_rx_pkt *pkt;
1667         struct il3945_rxon_assoc_cmd rxon_assoc;
1668         struct il_host_cmd cmd = {
1669                 .id = C_RXON_ASSOC,
1670                 .len = sizeof(rxon_assoc),
1671                 .flags = CMD_WANT_SKB,
1672                 .data = &rxon_assoc,
1673         };
1674         const struct il_rxon_cmd *rxon1 = &il->staging;
1675         const struct il_rxon_cmd *rxon2 = &il->active;
1676
1677         if (rxon1->flags == rxon2->flags &&
1678             rxon1->filter_flags == rxon2->filter_flags &&
1679             rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
1680             rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
1681                 D_INFO("Using current RXON_ASSOC.  Not resending.\n");
1682                 return 0;
1683         }
1684
1685         rxon_assoc.flags = il->staging.flags;
1686         rxon_assoc.filter_flags = il->staging.filter_flags;
1687         rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates;
1688         rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates;
1689         rxon_assoc.reserved = 0;
1690
1691         rc = il_send_cmd_sync(il, &cmd);
1692         if (rc)
1693                 return rc;
1694
1695         pkt = (struct il_rx_pkt *)cmd.reply_page;
1696         if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
1697                 IL_ERR("Bad return from C_RXON_ASSOC command\n");
1698                 rc = -EIO;
1699         }
1700
1701         il_free_pages(il, cmd.reply_page);
1702
1703         return rc;
1704 }
1705
1706 /**
1707  * il3945_commit_rxon - commit staging_rxon to hardware
1708  *
1709  * The RXON command in staging_rxon is committed to the hardware and
1710  * the active_rxon structure is updated with the new data.  This
1711  * function correctly transitions out of the RXON_ASSOC_MSK state if
1712  * a HW tune is required based on the RXON structure changes.
1713  */
1714 int
1715 il3945_commit_rxon(struct il_priv *il)
1716 {
1717         /* cast away the const for active_rxon in this function */
1718         struct il3945_rxon_cmd *active_rxon = (void *)&il->active;
1719         struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging;
1720         int rc = 0;
1721         bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
1722
1723         if (test_bit(S_EXIT_PENDING, &il->status))
1724                 return -EINVAL;
1725
1726         if (!il_is_alive(il))
1727                 return -1;
1728
1729         /* always get timestamp with Rx frame */
1730         staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
1731
1732         /* select antenna */
1733         staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1734         staging_rxon->flags |= il3945_get_antenna_flags(il);
1735
1736         rc = il_check_rxon_cmd(il);
1737         if (rc) {
1738                 IL_ERR("Invalid RXON configuration.  Not committing.\n");
1739                 return -EINVAL;
1740         }
1741
1742         /* If we don't need to send a full RXON, we can use
1743          * il3945_rxon_assoc_cmd which is used to reconfigure filter
1744          * and other flags for the current radio configuration. */
1745         if (!il_full_rxon_required(il)) {
1746                 rc = il_send_rxon_assoc(il);
1747                 if (rc) {
1748                         IL_ERR("Error setting RXON_ASSOC "
1749                                "configuration (%d).\n", rc);
1750                         return rc;
1751                 }
1752
1753                 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1754                 /*
1755                  * We do not commit tx power settings while channel changing,
1756                  * do it now if tx power changed.
1757                  */
1758                 il_set_tx_power(il, il->tx_power_next, false);
1759                 return 0;
1760         }
1761
1762         /* If we are currently associated and the new config requires
1763          * an RXON_ASSOC and the new config wants the associated mask enabled,
1764          * we must clear the associated from the active configuration
1765          * before we apply the new config */
1766         if (il_is_associated(il) && new_assoc) {
1767                 D_INFO("Toggling associated bit on current RXON\n");
1768                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1769
1770                 /*
1771                  * reserved4 and 5 could have been filled by the iwlcore code.
1772                  * Let's clear them before pushing to the 3945.
1773                  */
1774                 active_rxon->reserved4 = 0;
1775                 active_rxon->reserved5 = 0;
1776                 rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
1777                                      &il->active);
1778
1779                 /* If the mask clearing failed then we set
1780                  * active_rxon back to what it was previously */
1781                 if (rc) {
1782                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1783                         IL_ERR("Error clearing ASSOC_MSK on current "
1784                                "configuration (%d).\n", rc);
1785                         return rc;
1786                 }
1787                 il_clear_ucode_stations(il);
1788                 il_restore_stations(il);
1789         }
1790
1791         D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n"
1792                "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"),
1793                le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr);
1794
1795         /*
1796          * reserved4 and 5 could have been filled by the iwlcore code.
1797          * Let's clear them before pushing to the 3945.
1798          */
1799         staging_rxon->reserved4 = 0;
1800         staging_rxon->reserved5 = 0;
1801
1802         il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto);
1803
1804         /* Apply the new configuration */
1805         rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
1806                              staging_rxon);
1807         if (rc) {
1808                 IL_ERR("Error setting new configuration (%d).\n", rc);
1809                 return rc;
1810         }
1811
1812         memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1813
1814         if (!new_assoc) {
1815                 il_clear_ucode_stations(il);
1816                 il_restore_stations(il);
1817         }
1818
1819         /* If we issue a new RXON command which required a tune then we must
1820          * send a new TXPOWER command or we won't be able to Tx any frames */
1821         rc = il_set_tx_power(il, il->tx_power_next, true);
1822         if (rc) {
1823                 IL_ERR("Error setting Tx power (%d).\n", rc);
1824                 return rc;
1825         }
1826
1827         /* Init the hardware's rate fallback order based on the band */
1828         rc = il3945_init_hw_rate_table(il);
1829         if (rc) {
1830                 IL_ERR("Error setting HW rate table: %02X\n", rc);
1831                 return -EIO;
1832         }
1833
1834         return 0;
1835 }
1836
1837 /**
1838  * il3945_reg_txpower_periodic -  called when time to check our temperature.
1839  *
1840  * -- reset periodic timer
1841  * -- see if temp has changed enough to warrant re-calibration ... if so:
1842  *     -- correct coeffs for temp (can reset temp timer)
1843  *     -- save this temp as "last",
1844  *     -- send new set of gain settings to NIC
1845  * NOTE:  This should continue working, even when we're not associated,
1846  *   so we can keep our internal table of scan powers current. */
1847 void
1848 il3945_reg_txpower_periodic(struct il_priv *il)
1849 {
1850         /* This will kick in the "brute force"
1851          * il3945_hw_reg_comp_txpower_temp() below */
1852         if (!il3945_is_temp_calib_needed(il))
1853                 goto reschedule;
1854
1855         /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1856          * This is based *only* on current temperature,
1857          * ignoring any previous power measurements */
1858         il3945_hw_reg_comp_txpower_temp(il);
1859
1860 reschedule:
1861         queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic,
1862                            REG_RECALIB_PERIOD * HZ);
1863 }
1864
1865 static void
1866 il3945_bg_reg_txpower_periodic(struct work_struct *work)
1867 {
1868         struct il_priv *il = container_of(work, struct il_priv,
1869                                           _3945.thermal_periodic.work);
1870
1871         if (test_bit(S_EXIT_PENDING, &il->status))
1872                 return;
1873
1874         mutex_lock(&il->mutex);
1875         il3945_reg_txpower_periodic(il);
1876         mutex_unlock(&il->mutex);
1877 }
1878
1879 /**
1880  * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel.
1881  *
1882  * This function is used when initializing channel-info structs.
1883  *
1884  * NOTE: These channel groups do *NOT* match the bands above!
1885  *       These channel groups are based on factory-tested channels;
1886  *       on A-band, EEPROM's "group frequency" entries represent the top
1887  *       channel in each group 1-4.  Group 5 All B/G channels are in group 0.
1888  */
1889 static u16
1890 il3945_hw_reg_get_ch_grp_idx(struct il_priv *il,
1891                              const struct il_channel_info *ch_info)
1892 {
1893         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1894         struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
1895         u8 group;
1896         u16 group_idx = 0;      /* based on factory calib frequencies */
1897         u8 grp_channel;
1898
1899         /* Find the group idx for the channel ... don't use idx 1(?) */
1900         if (il_is_channel_a_band(ch_info)) {
1901                 for (group = 1; group < 5; group++) {
1902                         grp_channel = ch_grp[group].group_channel;
1903                         if (ch_info->channel <= grp_channel) {
1904                                 group_idx = group;
1905                                 break;
1906                         }
1907                 }
1908                 /* group 4 has a few channels *above* its factory cal freq */
1909                 if (group == 5)
1910                         group_idx = 4;
1911         } else
1912                 group_idx = 0;  /* 2.4 GHz, group 0 */
1913
1914         D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx);
1915         return group_idx;
1916 }
1917
1918 /**
1919  * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx
1920  *
1921  * Interpolate to get nominal (i.e. at factory calibration temperature) idx
1922  *   into radio/DSP gain settings table for requested power.
1923  */
1924 static int
1925 il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power,
1926                                     s32 setting_idx, s32 *new_idx)
1927 {
1928         const struct il3945_eeprom_txpower_group *chnl_grp = NULL;
1929         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1930         s32 idx0, idx1;
1931         s32 power = 2 * requested_power;
1932         s32 i;
1933         const struct il3945_eeprom_txpower_sample *samples;
1934         s32 gains0, gains1;
1935         s32 res;
1936         s32 denominator;
1937
1938         chnl_grp = &eeprom->groups[setting_idx];
1939         samples = chnl_grp->samples;
1940         for (i = 0; i < 5; i++) {
1941                 if (power == samples[i].power) {
1942                         *new_idx = samples[i].gain_idx;
1943                         return 0;
1944                 }
1945         }
1946
1947         if (power > samples[1].power) {
1948                 idx0 = 0;
1949                 idx1 = 1;
1950         } else if (power > samples[2].power) {
1951                 idx0 = 1;
1952                 idx1 = 2;
1953         } else if (power > samples[3].power) {
1954                 idx0 = 2;
1955                 idx1 = 3;
1956         } else {
1957                 idx0 = 3;
1958                 idx1 = 4;
1959         }
1960
1961         denominator = (s32) samples[idx1].power - (s32) samples[idx0].power;
1962         if (denominator == 0)
1963                 return -EINVAL;
1964         gains0 = (s32) samples[idx0].gain_idx * (1 << 19);
1965         gains1 = (s32) samples[idx1].gain_idx * (1 << 19);
1966         res =
1967             gains0 + (gains1 - gains0) * ((s32) power -
1968                                           (s32) samples[idx0].power) /
1969             denominator + (1 << 18);
1970         *new_idx = res >> 19;
1971         return 0;
1972 }
1973
1974 static void
1975 il3945_hw_reg_init_channel_groups(struct il_priv *il)
1976 {
1977         u32 i;
1978         s32 rate_idx;
1979         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1980         const struct il3945_eeprom_txpower_group *group;
1981
1982         D_POWER("Initializing factory calib info from EEPROM\n");
1983
1984         for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) {
1985                 s8 *clip_pwrs;  /* table of power levels for each rate */
1986                 s8 satur_pwr;   /* saturation power for each chnl group */
1987                 group = &eeprom->groups[i];
1988
1989                 /* sanity check on factory saturation power value */
1990                 if (group->saturation_power < 40) {
1991                         IL_WARN("Error: saturation power is %d, "
1992                                 "less than minimum expected 40\n",
1993                                 group->saturation_power);
1994                         return;
1995                 }
1996
1997                 /*
1998                  * Derive requested power levels for each rate, based on
1999                  *   hardware capabilities (saturation power for band).
2000                  * Basic value is 3dB down from saturation, with further
2001                  *   power reductions for highest 3 data rates.  These
2002                  *   backoffs provide headroom for high rate modulation
2003                  *   power peaks, without too much distortion (clipping).
2004                  */
2005                 /* we'll fill in this array with h/w max power levels */
2006                 clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers;
2007
2008                 /* divide factory saturation power by 2 to find -3dB level */
2009                 satur_pwr = (s8) (group->saturation_power >> 1);
2010
2011                 /* fill in channel group's nominal powers for each rate */
2012                 for (rate_idx = 0; rate_idx < RATE_COUNT_3945;
2013                      rate_idx++, clip_pwrs++) {
2014                         switch (rate_idx) {
2015                         case RATE_36M_IDX_TBL:
2016                                 if (i == 0)     /* B/G */
2017                                         *clip_pwrs = satur_pwr;
2018                                 else    /* A */
2019                                         *clip_pwrs = satur_pwr - 5;
2020                                 break;
2021                         case RATE_48M_IDX_TBL:
2022                                 if (i == 0)
2023                                         *clip_pwrs = satur_pwr - 7;
2024                                 else
2025                                         *clip_pwrs = satur_pwr - 10;
2026                                 break;
2027                         case RATE_54M_IDX_TBL:
2028                                 if (i == 0)
2029                                         *clip_pwrs = satur_pwr - 9;
2030                                 else
2031                                         *clip_pwrs = satur_pwr - 12;
2032                                 break;
2033                         default:
2034                                 *clip_pwrs = satur_pwr;
2035                                 break;
2036                         }
2037                 }
2038         }
2039 }
2040
2041 /**
2042  * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2043  *
2044  * Second pass (during init) to set up il->channel_info
2045  *
2046  * Set up Tx-power settings in our channel info database for each VALID
2047  * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2048  * and current temperature.
2049  *
2050  * Since this is based on current temperature (at init time), these values may
2051  * not be valid for very long, but it gives us a starting/default point,
2052  * and allows us to active (i.e. using Tx) scan.
2053  *
2054  * This does *not* write values to NIC, just sets up our internal table.
2055  */
2056 int
2057 il3945_txpower_set_from_eeprom(struct il_priv *il)
2058 {
2059         struct il_channel_info *ch_info = NULL;
2060         struct il3945_channel_power_info *pwr_info;
2061         struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
2062         int delta_idx;
2063         u8 rate_idx;
2064         u8 scan_tbl_idx;
2065         const s8 *clip_pwrs;    /* array of power levels for each rate */
2066         u8 gain, dsp_atten;
2067         s8 power;
2068         u8 pwr_idx, base_pwr_idx, a_band;
2069         u8 i;
2070         int temperature;
2071
2072         /* save temperature reference,
2073          *   so we can determine next time to calibrate */
2074         temperature = il3945_hw_reg_txpower_get_temperature(il);
2075         il->last_temperature = temperature;
2076
2077         il3945_hw_reg_init_channel_groups(il);
2078
2079         /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2080         for (i = 0, ch_info = il->channel_info; i < il->channel_count;
2081              i++, ch_info++) {
2082                 a_band = il_is_channel_a_band(ch_info);
2083                 if (!il_is_channel_valid(ch_info))
2084                         continue;
2085
2086                 /* find this channel's channel group (*not* "band") idx */
2087                 ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info);
2088
2089                 /* Get this chnlgrp's rate->max/clip-powers table */
2090                 clip_pwrs =
2091                     il->_3945.clip_groups[ch_info->group_idx].clip_powers;
2092
2093                 /* calculate power idx *adjustment* value according to
2094                  *  diff between current temperature and factory temperature */
2095                 delta_idx =
2096                     il3945_hw_reg_adjust_power_by_temp(temperature,
2097                                                        eeprom->groups[ch_info->
2098                                                                       group_idx].
2099                                                        temperature);
2100
2101                 D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel,
2102                         delta_idx, temperature + IL_TEMP_CONVERT);
2103
2104                 /* set tx power value for all OFDM rates */
2105                 for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) {
2106                         s32 uninitialized_var(power_idx);
2107                         int rc;
2108
2109                         /* use channel group's clip-power table,
2110                          *   but don't exceed channel's max power */
2111                         s8 pwr = min(ch_info->max_power_avg,
2112                                      clip_pwrs[rate_idx]);
2113
2114                         pwr_info = &ch_info->power_info[rate_idx];
2115
2116                         /* get base (i.e. at factory-measured temperature)
2117                          *    power table idx for this rate's power */
2118                         rc = il3945_hw_reg_get_matched_power_idx(il, pwr,
2119                                                                  ch_info->
2120                                                                  group_idx,
2121                                                                  &power_idx);
2122                         if (rc) {
2123                                 IL_ERR("Invalid power idx\n");
2124                                 return rc;
2125                         }
2126                         pwr_info->base_power_idx = (u8) power_idx;
2127
2128                         /* temperature compensate */
2129                         power_idx += delta_idx;
2130
2131                         /* stay within range of gain table */
2132                         power_idx = il3945_hw_reg_fix_power_idx(power_idx);
2133
2134                         /* fill 1 OFDM rate's il3945_channel_power_info struct */
2135                         pwr_info->requested_power = pwr;
2136                         pwr_info->power_table_idx = (u8) power_idx;
2137                         pwr_info->tpc.tx_gain =
2138                             power_gain_table[a_band][power_idx].tx_gain;
2139                         pwr_info->tpc.dsp_atten =
2140                             power_gain_table[a_band][power_idx].dsp_atten;
2141                 }
2142
2143                 /* set tx power for CCK rates, based on OFDM 12 Mbit settings */
2144                 pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL];
2145                 power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
2146                 pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
2147                 base_pwr_idx =
2148                     pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
2149
2150                 /* stay within table range */
2151                 pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx);
2152                 gain = power_gain_table[a_band][pwr_idx].tx_gain;
2153                 dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten;
2154
2155                 /* fill each CCK rate's il3945_channel_power_info structure
2156                  * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
2157                  * NOTE:  CCK rates start at end of OFDM rates! */
2158                 for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) {
2159                         pwr_info =
2160                             &ch_info->power_info[rate_idx + IL_OFDM_RATES];
2161                         pwr_info->requested_power = power;
2162                         pwr_info->power_table_idx = pwr_idx;
2163                         pwr_info->base_power_idx = base_pwr_idx;
2164                         pwr_info->tpc.tx_gain = gain;
2165                         pwr_info->tpc.dsp_atten = dsp_atten;
2166                 }
2167
2168                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2169                 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
2170                      scan_tbl_idx++) {
2171                         s32 actual_idx =
2172                             (scan_tbl_idx ==
2173                              0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
2174                         il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
2175                                                      actual_idx, clip_pwrs,
2176                                                      ch_info, a_band);
2177                 }
2178         }
2179
2180         return 0;
2181 }
2182
2183 int
2184 il3945_hw_rxq_stop(struct il_priv *il)
2185 {
2186         int rc;
2187
2188         il_wr(il, FH39_RCSR_CONFIG(0), 0);
2189         rc = il_poll_bit(il, FH39_RSSR_STATUS,
2190                          FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
2191         if (rc < 0)
2192                 IL_ERR("Can't stop Rx DMA.\n");
2193
2194         return 0;
2195 }
2196
2197 int
2198 il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
2199 {
2200         int txq_id = txq->q.id;
2201
2202         struct il3945_shared *shared_data = il->_3945.shared_virt;
2203
2204         shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr);
2205
2206         il_wr(il, FH39_CBCC_CTRL(txq_id), 0);
2207         il_wr(il, FH39_CBCC_BASE(txq_id), 0);
2208
2209         il_wr(il, FH39_TCSR_CONFIG(txq_id),
2210               FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2211               FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2212               FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2213               FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2214               FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2215
2216         /* fake read to flush all prev. writes */
2217         _il_rd(il, FH39_TSSR_CBB_BASE);
2218
2219         return 0;
2220 }
2221
2222 /*
2223  * HCMD utils
2224  */
2225 static u16
2226 il3945_get_hcmd_size(u8 cmd_id, u16 len)
2227 {
2228         switch (cmd_id) {
2229         case C_RXON:
2230                 return sizeof(struct il3945_rxon_cmd);
2231         case C_POWER_TBL:
2232                 return sizeof(struct il3945_powertable_cmd);
2233         default:
2234                 return len;
2235         }
2236 }
2237
2238 static u16
2239 il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data)
2240 {
2241         struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data;
2242         addsta->mode = cmd->mode;
2243         memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2244         memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
2245         addsta->station_flags = cmd->station_flags;
2246         addsta->station_flags_msk = cmd->station_flags_msk;
2247         addsta->tid_disable_tx = cpu_to_le16(0);
2248         addsta->rate_n_flags = cmd->rate_n_flags;
2249         addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2250         addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2251         addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2252
2253         return (u16) sizeof(struct il3945_addsta_cmd);
2254 }
2255
2256 static int
2257 il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r)
2258 {
2259         int ret;
2260         u8 sta_id;
2261         unsigned long flags;
2262
2263         if (sta_id_r)
2264                 *sta_id_r = IL_INVALID_STATION;
2265
2266         ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
2267         if (ret) {
2268                 IL_ERR("Unable to add station %pM\n", addr);
2269                 return ret;
2270         }
2271
2272         if (sta_id_r)
2273                 *sta_id_r = sta_id;
2274
2275         spin_lock_irqsave(&il->sta_lock, flags);
2276         il->stations[sta_id].used |= IL_STA_LOCAL;
2277         spin_unlock_irqrestore(&il->sta_lock, flags);
2278
2279         return 0;
2280 }
2281
2282 static int
2283 il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
2284                            bool add)
2285 {
2286         struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
2287         int ret;
2288
2289         if (add) {
2290                 ret =
2291                     il3945_add_bssid_station(il, vif->bss_conf.bssid,
2292                                              &vif_priv->ibss_bssid_sta_id);
2293                 if (ret)
2294                         return ret;
2295
2296                 il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
2297                                 (il->band ==
2298                                  IEEE80211_BAND_5GHZ) ? RATE_6M_PLCP :
2299                                 RATE_1M_PLCP);
2300                 il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
2301
2302                 return 0;
2303         }
2304
2305         return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
2306                                  vif->bss_conf.bssid);
2307 }
2308
2309 /**
2310  * il3945_init_hw_rate_table - Initialize the hardware rate fallback table
2311  */
2312 int
2313 il3945_init_hw_rate_table(struct il_priv *il)
2314 {
2315         int rc, i, idx, prev_idx;
2316         struct il3945_rate_scaling_cmd rate_cmd = {
2317                 .reserved = {0, 0, 0},
2318         };
2319         struct il3945_rate_scaling_info *table = rate_cmd.table;
2320
2321         for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) {
2322                 idx = il3945_rates[i].table_rs_idx;
2323
2324                 table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp);
2325                 table[idx].try_cnt = il->retry_rate;
2326                 prev_idx = il3945_get_prev_ieee_rate(i);
2327                 table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx;
2328         }
2329
2330         switch (il->band) {
2331         case IEEE80211_BAND_5GHZ:
2332                 D_RATE("Select A mode rate scale\n");
2333                 /* If one of the following CCK rates is used,
2334                  * have it fall back to the 6M OFDM rate */
2335                 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++)
2336                         table[i].next_rate_idx =
2337                             il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
2338
2339                 /* Don't fall back to CCK rates */
2340                 table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL;
2341
2342                 /* Don't drop out of OFDM rates */
2343                 table[RATE_6M_IDX_TBL].next_rate_idx =
2344                     il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
2345                 break;
2346
2347         case IEEE80211_BAND_2GHZ:
2348                 D_RATE("Select B/G mode rate scale\n");
2349                 /* If an OFDM rate is used, have it fall back to the
2350                  * 1M CCK rates */
2351
2352                 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
2353                     il_is_associated(il)) {
2354
2355                         idx = IL_FIRST_CCK_RATE;
2356                         for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++)
2357                                 table[i].next_rate_idx =
2358                                     il3945_rates[idx].table_rs_idx;
2359
2360                         idx = RATE_11M_IDX_TBL;
2361                         /* CCK shouldn't fall back to OFDM... */
2362                         table[idx].next_rate_idx = RATE_5M_IDX_TBL;
2363                 }
2364                 break;
2365
2366         default:
2367                 WARN_ON(1);
2368                 break;
2369         }
2370
2371         /* Update the rate scaling for control frame Tx */
2372         rate_cmd.table_id = 0;
2373         rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
2374         if (rc)
2375                 return rc;
2376
2377         /* Update the rate scaling for data frame Tx */
2378         rate_cmd.table_id = 1;
2379         return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
2380 }
2381
2382 /* Called when initializing driver */
2383 int
2384 il3945_hw_set_hw_params(struct il_priv *il)
2385 {
2386         memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params));
2387
2388         il->_3945.shared_virt =
2389             dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared),
2390                                &il->_3945.shared_phys, GFP_KERNEL);
2391         if (!il->_3945.shared_virt) {
2392                 IL_ERR("failed to allocate pci memory\n");
2393                 return -ENOMEM;
2394         }
2395
2396         il->hw_params.bcast_id = IL3945_BROADCAST_ID;
2397
2398         /* Assign number of Usable TX queues */
2399         il->hw_params.max_txq_num = il->cfg->num_of_queues;
2400
2401         il->hw_params.tfd_size = sizeof(struct il3945_tfd);
2402         il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K);
2403         il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
2404         il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
2405         il->hw_params.max_stations = IL3945_STATION_COUNT;
2406
2407         il->sta_key_max_num = STA_KEY_MAX_NUM;
2408
2409         il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
2410         il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL;
2411         il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS;
2412
2413         return 0;
2414 }
2415
2416 unsigned int
2417 il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame,
2418                          u8 rate)
2419 {
2420         struct il3945_tx_beacon_cmd *tx_beacon_cmd;
2421         unsigned int frame_size;
2422
2423         tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u;
2424         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2425
2426         tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
2427         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2428
2429         frame_size =
2430             il3945_fill_beacon_frame(il, tx_beacon_cmd->frame,
2431                                      sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2432
2433         BUG_ON(frame_size > MAX_MPDU_SIZE);
2434         tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
2435
2436         tx_beacon_cmd->tx.rate = rate;
2437         tx_beacon_cmd->tx.tx_flags =
2438             (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK);
2439
2440         /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */
2441         tx_beacon_cmd->tx.supp_rates[0] =
2442             (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
2443
2444         tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF);
2445
2446         return sizeof(struct il3945_tx_beacon_cmd) + frame_size;
2447 }
2448
2449 void
2450 il3945_hw_handler_setup(struct il_priv *il)
2451 {
2452         il->handlers[C_TX] = il3945_hdl_tx;
2453         il->handlers[N_3945_RX] = il3945_hdl_rx;
2454 }
2455
2456 void
2457 il3945_hw_setup_deferred_work(struct il_priv *il)
2458 {
2459         INIT_DELAYED_WORK(&il->_3945.thermal_periodic,
2460                           il3945_bg_reg_txpower_periodic);
2461 }
2462
2463 void
2464 il3945_hw_cancel_deferred_work(struct il_priv *il)
2465 {
2466         cancel_delayed_work(&il->_3945.thermal_periodic);
2467 }
2468
2469 /* check contents of special bootstrap uCode SRAM */
2470 static int
2471 il3945_verify_bsm(struct il_priv *il)
2472 {
2473         __le32 *image = il->ucode_boot.v_addr;
2474         u32 len = il->ucode_boot.len;
2475         u32 reg;
2476         u32 val;
2477
2478         D_INFO("Begin verify bsm\n");
2479
2480         /* verify BSM SRAM contents */
2481         val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
2482         for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len;
2483              reg += sizeof(u32), image++) {
2484                 val = il_rd_prph(il, reg);
2485                 if (val != le32_to_cpu(*image)) {
2486                         IL_ERR("BSM uCode verification failed at "
2487                                "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
2488                                BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND,
2489                                len, val, le32_to_cpu(*image));
2490                         return -EIO;
2491                 }
2492         }
2493
2494         D_INFO("BSM bootstrap uCode image OK\n");
2495
2496         return 0;
2497 }
2498
2499 /******************************************************************************
2500  *
2501  * EEPROM related functions
2502  *
2503  ******************************************************************************/
2504
2505 /*
2506  * Clear the OWNER_MSK, to establish driver (instead of uCode running on
2507  * embedded controller) as EEPROM reader; each read is a series of pulses
2508  * to/from the EEPROM chip, not a single event, so even reads could conflict
2509  * if they weren't arbitrated by some ownership mechanism.  Here, the driver
2510  * simply claims ownership, which should be safe when this function is called
2511  * (i.e. before loading uCode!).
2512  */
2513 static int
2514 il3945_eeprom_acquire_semaphore(struct il_priv *il)
2515 {
2516         _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
2517         return 0;
2518 }
2519
2520 static void
2521 il3945_eeprom_release_semaphore(struct il_priv *il)
2522 {
2523         return;
2524 }
2525
2526  /**
2527   * il3945_load_bsm - Load bootstrap instructions
2528   *
2529   * BSM operation:
2530   *
2531   * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
2532   * in special SRAM that does not power down during RFKILL.  When powering back
2533   * up after power-saving sleeps (or during initial uCode load), the BSM loads
2534   * the bootstrap program into the on-board processor, and starts it.
2535   *
2536   * The bootstrap program loads (via DMA) instructions and data for a new
2537   * program from host DRAM locations indicated by the host driver in the
2538   * BSM_DRAM_* registers.  Once the new program is loaded, it starts
2539   * automatically.
2540   *
2541   * When initializing the NIC, the host driver points the BSM to the
2542   * "initialize" uCode image.  This uCode sets up some internal data, then
2543   * notifies host via "initialize alive" that it is complete.
2544   *
2545   * The host then replaces the BSM_DRAM_* pointer values to point to the
2546   * normal runtime uCode instructions and a backup uCode data cache buffer
2547   * (filled initially with starting data values for the on-board processor),
2548   * then triggers the "initialize" uCode to load and launch the runtime uCode,
2549   * which begins normal operation.
2550   *
2551   * When doing a power-save shutdown, runtime uCode saves data SRAM into
2552   * the backup data cache in DRAM before SRAM is powered down.
2553   *
2554   * When powering back up, the BSM loads the bootstrap program.  This reloads
2555   * the runtime uCode instructions and the backup data cache into SRAM,
2556   * and re-launches the runtime uCode from where it left off.
2557   */
2558 static int
2559 il3945_load_bsm(struct il_priv *il)
2560 {
2561         __le32 *image = il->ucode_boot.v_addr;
2562         u32 len = il->ucode_boot.len;
2563         dma_addr_t pinst;
2564         dma_addr_t pdata;
2565         u32 inst_len;
2566         u32 data_len;
2567         int rc;
2568         int i;
2569         u32 done;
2570         u32 reg_offset;
2571
2572         D_INFO("Begin load bsm\n");
2573
2574         /* make sure bootstrap program is no larger than BSM's SRAM size */
2575         if (len > IL39_MAX_BSM_SIZE)
2576                 return -EINVAL;
2577
2578         /* Tell bootstrap uCode where to find the "Initialize" uCode
2579          *   in host DRAM ... host DRAM physical address bits 31:0 for 3945.
2580          * NOTE:  il3945_initialize_alive_start() will replace these values,
2581          *        after the "initialize" uCode has run, to point to
2582          *        runtime/protocol instructions and backup data cache. */
2583         pinst = il->ucode_init.p_addr;
2584         pdata = il->ucode_init_data.p_addr;
2585         inst_len = il->ucode_init.len;
2586         data_len = il->ucode_init_data.len;
2587
2588         il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2589         il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2590         il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
2591         il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
2592
2593         /* Fill BSM memory with bootstrap instructions */
2594         for (reg_offset = BSM_SRAM_LOWER_BOUND;
2595              reg_offset < BSM_SRAM_LOWER_BOUND + len;
2596              reg_offset += sizeof(u32), image++)
2597                 _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
2598
2599         rc = il3945_verify_bsm(il);
2600         if (rc)
2601                 return rc;
2602
2603         /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
2604         il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
2605         il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND);
2606         il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
2607
2608         /* Load bootstrap code into instruction SRAM now,
2609          *   to prepare to load "initialize" uCode */
2610         il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
2611
2612         /* Wait for load of bootstrap uCode to finish */
2613         for (i = 0; i < 100; i++) {
2614                 done = il_rd_prph(il, BSM_WR_CTRL_REG);
2615                 if (!(done & BSM_WR_CTRL_REG_BIT_START))
2616                         break;
2617                 udelay(10);
2618         }
2619         if (i < 100)
2620                 D_INFO("BSM write complete, poll %d iterations\n", i);
2621         else {
2622                 IL_ERR("BSM write did not complete!\n");
2623                 return -EIO;
2624         }
2625
2626         /* Enable future boot loads whenever power management unit triggers it
2627          *   (e.g. when powering back up after power-save shutdown) */
2628         il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
2629
2630         return 0;
2631 }
2632
2633 static struct il_hcmd_ops il3945_hcmd = {
2634         .rxon_assoc = il3945_send_rxon_assoc,
2635         .commit_rxon = il3945_commit_rxon,
2636 };
2637
2638 static struct il_lib_ops il3945_lib = {
2639         .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd,
2640         .txq_free_tfd = il3945_hw_txq_free_tfd,
2641         .txq_init = il3945_hw_tx_queue_init,
2642         .load_ucode = il3945_load_bsm,
2643         .dump_nic_error_log = il3945_dump_nic_error_log,
2644         .apm_ops = {
2645                     .init = il3945_apm_init,
2646                     .config = il3945_nic_config,
2647                     },
2648         .send_tx_power = il3945_send_tx_power,
2649         .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr,
2650         .eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore,
2651         .eeprom_release_semaphore = il3945_eeprom_release_semaphore,
2652 };
2653
2654 static const struct il_legacy_ops il3945_legacy_ops = {
2655         .post_associate = il3945_post_associate,
2656         .config_ap = il3945_config_ap,
2657         .manage_ibss_station = il3945_manage_ibss_station,
2658 };
2659
2660 static struct il_hcmd_utils_ops il3945_hcmd_utils = {
2661         .get_hcmd_size = il3945_get_hcmd_size,
2662         .build_addsta_hcmd = il3945_build_addsta_hcmd,
2663         .request_scan = il3945_request_scan,
2664         .post_scan = il3945_post_scan,
2665 };
2666
2667 const struct il_ops il3945_ops = {
2668         .lib = &il3945_lib,
2669         .hcmd = &il3945_hcmd,
2670         .utils = &il3945_hcmd_utils,
2671         .led = &il3945_led_ops,
2672         .legacy = &il3945_legacy_ops,
2673 };
2674
2675 static struct il_cfg il3945_bg_cfg = {
2676         .name = "3945BG",
2677         .fw_name_pre = IL3945_FW_PRE,
2678         .ucode_api_max = IL3945_UCODE_API_MAX,
2679         .ucode_api_min = IL3945_UCODE_API_MIN,
2680         .sku = IL_SKU_G,
2681         .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2682         .mod_params = &il3945_mod_params,
2683         .led_mode = IL_LED_BLINK,
2684
2685         .eeprom_size = IL3945_EEPROM_IMG_SIZE,
2686         .num_of_queues = IL39_NUM_QUEUES,
2687         .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2688         .set_l0s = false,
2689         .use_bsm = true,
2690         .led_compensation = 64,
2691         .wd_timeout = IL_DEF_WD_TIMEOUT,
2692
2693         .regulatory_bands = {
2694                 EEPROM_REGULATORY_BAND_1_CHANNELS,
2695                 EEPROM_REGULATORY_BAND_2_CHANNELS,
2696                 EEPROM_REGULATORY_BAND_3_CHANNELS,
2697                 EEPROM_REGULATORY_BAND_4_CHANNELS,
2698                 EEPROM_REGULATORY_BAND_5_CHANNELS,
2699                 EEPROM_REGULATORY_BAND_NO_HT40,
2700                 EEPROM_REGULATORY_BAND_NO_HT40,
2701         },
2702 };
2703
2704 static struct il_cfg il3945_abg_cfg = {
2705         .name = "3945ABG",
2706         .fw_name_pre = IL3945_FW_PRE,
2707         .ucode_api_max = IL3945_UCODE_API_MAX,
2708         .ucode_api_min = IL3945_UCODE_API_MIN,
2709         .sku = IL_SKU_A | IL_SKU_G,
2710         .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2711         .mod_params = &il3945_mod_params,
2712         .led_mode = IL_LED_BLINK,
2713
2714         .eeprom_size = IL3945_EEPROM_IMG_SIZE,
2715         .num_of_queues = IL39_NUM_QUEUES,
2716         .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2717         .set_l0s = false,
2718         .use_bsm = true,
2719         .led_compensation = 64,
2720         .wd_timeout = IL_DEF_WD_TIMEOUT,
2721
2722         .regulatory_bands = {
2723                 EEPROM_REGULATORY_BAND_1_CHANNELS,
2724                 EEPROM_REGULATORY_BAND_2_CHANNELS,
2725                 EEPROM_REGULATORY_BAND_3_CHANNELS,
2726                 EEPROM_REGULATORY_BAND_4_CHANNELS,
2727                 EEPROM_REGULATORY_BAND_5_CHANNELS,
2728                 EEPROM_REGULATORY_BAND_NO_HT40,
2729                 EEPROM_REGULATORY_BAND_NO_HT40,
2730         },
2731 };
2732
2733 DEFINE_PCI_DEVICE_TABLE(il3945_hw_card_ids) = {
2734         {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)},
2735         {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)},
2736         {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)},
2737         {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)},
2738         {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)},
2739         {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)},
2740         {0}
2741 };
2742
2743 MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids);