]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/wireless/iwlwifi/iwl-5000.c
iwlwifi: add wrappers for command sending
[karo-tx-linux.git] / drivers / net / wireless / iwlwifi / iwl-5000.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2007 - 2012 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26
27 #include <linux/kernel.h>
28 #include <linux/module.h>
29 #include <linux/init.h>
30 #include <linux/delay.h>
31 #include <linux/sched.h>
32 #include <linux/skbuff.h>
33 #include <linux/netdevice.h>
34 #include <net/mac80211.h>
35 #include <linux/etherdevice.h>
36 #include <asm/unaligned.h>
37 #include <linux/stringify.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-dev.h"
41 #include "iwl-core.h"
42 #include "iwl-io.h"
43 #include "iwl-agn.h"
44 #include "iwl-agn-hw.h"
45 #include "iwl-trans.h"
46 #include "iwl-shared.h"
47 #include "iwl-cfg.h"
48
49 /* Highest firmware API version supported */
50 #define IWL5000_UCODE_API_MAX 5
51 #define IWL5150_UCODE_API_MAX 2
52
53 /* Lowest firmware API version supported */
54 #define IWL5000_UCODE_API_MIN 1
55 #define IWL5150_UCODE_API_MIN 1
56
57 #define IWL5000_FW_PRE "iwlwifi-5000-"
58 #define IWL5000_MODULE_FIRMWARE(api) IWL5000_FW_PRE __stringify(api) ".ucode"
59
60 #define IWL5150_FW_PRE "iwlwifi-5150-"
61 #define IWL5150_MODULE_FIRMWARE(api) IWL5150_FW_PRE __stringify(api) ".ucode"
62
63 /* NIC configuration for 5000 series */
64 static void iwl5000_nic_config(struct iwl_priv *priv)
65 {
66         iwl_rf_config(priv);
67
68         /* W/A : NIC is stuck in a reset state after Early PCIe power off
69          * (PCIe power is lost before PERST# is asserted),
70          * causing ME FW to lose ownership and not being able to obtain it back.
71          */
72         iwl_set_bits_mask_prph(trans(priv), APMG_PS_CTRL_REG,
73                                 APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS,
74                                 ~APMG_PS_CTRL_EARLY_PWR_OFF_RESET_DIS);
75 }
76
77 static struct iwl_sensitivity_ranges iwl5000_sensitivity = {
78         .min_nrg_cck = 100,
79         .max_nrg_cck = 0, /* not used, set to 0 */
80         .auto_corr_min_ofdm = 90,
81         .auto_corr_min_ofdm_mrc = 170,
82         .auto_corr_min_ofdm_x1 = 105,
83         .auto_corr_min_ofdm_mrc_x1 = 220,
84
85         .auto_corr_max_ofdm = 120,
86         .auto_corr_max_ofdm_mrc = 210,
87         .auto_corr_max_ofdm_x1 = 120,
88         .auto_corr_max_ofdm_mrc_x1 = 240,
89
90         .auto_corr_min_cck = 125,
91         .auto_corr_max_cck = 200,
92         .auto_corr_min_cck_mrc = 200,
93         .auto_corr_max_cck_mrc = 400,
94         .nrg_th_cck = 100,
95         .nrg_th_ofdm = 100,
96
97         .barker_corr_th_min = 190,
98         .barker_corr_th_min_mrc = 390,
99         .nrg_th_cca = 62,
100 };
101
102 static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
103         .min_nrg_cck = 95,
104         .max_nrg_cck = 0, /* not used, set to 0 */
105         .auto_corr_min_ofdm = 90,
106         .auto_corr_min_ofdm_mrc = 170,
107         .auto_corr_min_ofdm_x1 = 105,
108         .auto_corr_min_ofdm_mrc_x1 = 220,
109
110         .auto_corr_max_ofdm = 120,
111         .auto_corr_max_ofdm_mrc = 210,
112         /* max = min for performance bug in 5150 DSP */
113         .auto_corr_max_ofdm_x1 = 105,
114         .auto_corr_max_ofdm_mrc_x1 = 220,
115
116         .auto_corr_min_cck = 125,
117         .auto_corr_max_cck = 200,
118         .auto_corr_min_cck_mrc = 170,
119         .auto_corr_max_cck_mrc = 400,
120         .nrg_th_cck = 95,
121         .nrg_th_ofdm = 95,
122
123         .barker_corr_th_min = 190,
124         .barker_corr_th_min_mrc = 390,
125         .nrg_th_cca = 62,
126 };
127
128 #define IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF   (-5)
129
130 static s32 iwl_temp_calib_to_offset(struct iwl_shared *shrd)
131 {
132         u16 temperature, voltage;
133         __le16 *temp_calib = (__le16 *)iwl_eeprom_query_addr(shrd,
134                                 EEPROM_KELVIN_TEMPERATURE);
135
136         temperature = le16_to_cpu(temp_calib[0]);
137         voltage = le16_to_cpu(temp_calib[1]);
138
139         /* offset = temp - volt / coeff */
140         return (s32)(temperature - voltage / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF);
141 }
142
143 static void iwl5150_set_ct_threshold(struct iwl_priv *priv)
144 {
145         const s32 volt2temp_coef = IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF;
146         s32 threshold = (s32)CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY) -
147                         iwl_temp_calib_to_offset(priv->shrd);
148
149         hw_params(priv).ct_kill_threshold = threshold * volt2temp_coef;
150 }
151
152 static void iwl5000_set_ct_threshold(struct iwl_priv *priv)
153 {
154         /* want Celsius */
155         hw_params(priv).ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
156 }
157
158 static void iwl5000_hw_set_hw_params(struct iwl_priv *priv)
159 {
160         if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
161             iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
162                 cfg(priv)->base_params->num_of_queues =
163                         iwlagn_mod_params.num_of_queues;
164
165         hw_params(priv).max_txq_num = cfg(priv)->base_params->num_of_queues;
166
167         hw_params(priv).ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
168                                         BIT(IEEE80211_BAND_5GHZ);
169
170         hw_params(priv).tx_chains_num =
171                 num_of_ant(hw_params(priv).valid_tx_ant);
172         hw_params(priv).rx_chains_num =
173                 num_of_ant(hw_params(priv).valid_rx_ant);
174
175         iwl5000_set_ct_threshold(priv);
176
177         /* Set initial sensitivity parameters */
178         hw_params(priv).sens = &iwl5000_sensitivity;
179 }
180
181 static void iwl5150_hw_set_hw_params(struct iwl_priv *priv)
182 {
183         if (iwlagn_mod_params.num_of_queues >= IWL_MIN_NUM_QUEUES &&
184             iwlagn_mod_params.num_of_queues <= IWLAGN_NUM_QUEUES)
185                 cfg(priv)->base_params->num_of_queues =
186                         iwlagn_mod_params.num_of_queues;
187
188         hw_params(priv).max_txq_num = cfg(priv)->base_params->num_of_queues;
189
190         hw_params(priv).ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
191                                         BIT(IEEE80211_BAND_5GHZ);
192
193         hw_params(priv).tx_chains_num =
194                 num_of_ant(hw_params(priv).valid_tx_ant);
195         hw_params(priv).rx_chains_num =
196                 num_of_ant(hw_params(priv).valid_rx_ant);
197
198         iwl5150_set_ct_threshold(priv);
199
200         /* Set initial sensitivity parameters */
201         hw_params(priv).sens = &iwl5150_sensitivity;
202 }
203
204 static void iwl5150_temperature(struct iwl_priv *priv)
205 {
206         u32 vt = 0;
207         s32 offset =  iwl_temp_calib_to_offset(priv->shrd);
208
209         vt = le32_to_cpu(priv->statistics.common.temperature);
210         vt = vt / IWL_5150_VOLTAGE_TO_TEMPERATURE_COEFF + offset;
211         /* now vt hold the temperature in Kelvin */
212         priv->temperature = KELVIN_TO_CELSIUS(vt);
213         iwl_tt_handler(priv);
214 }
215
216 static int iwl5000_hw_channel_switch(struct iwl_priv *priv,
217                                      struct ieee80211_channel_switch *ch_switch)
218 {
219         /*
220          * MULTI-FIXME
221          * See iwlagn_mac_channel_switch.
222          */
223         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
224         struct iwl5000_channel_switch_cmd cmd;
225         const struct iwl_channel_info *ch_info;
226         u32 switch_time_in_usec, ucode_switch_time;
227         u16 ch;
228         u32 tsf_low;
229         u8 switch_count;
230         u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
231         struct ieee80211_vif *vif = ctx->vif;
232         struct iwl_host_cmd hcmd = {
233                 .id = REPLY_CHANNEL_SWITCH,
234                 .len = { sizeof(cmd), },
235                 .flags = CMD_SYNC,
236                 .data = { &cmd, },
237         };
238
239         cmd.band = priv->band == IEEE80211_BAND_2GHZ;
240         ch = ch_switch->channel->hw_value;
241         IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
242                       ctx->active.channel, ch);
243         cmd.channel = cpu_to_le16(ch);
244         cmd.rxon_flags = ctx->staging.flags;
245         cmd.rxon_filter_flags = ctx->staging.filter_flags;
246         switch_count = ch_switch->count;
247         tsf_low = ch_switch->timestamp & 0x0ffffffff;
248         /*
249          * calculate the ucode channel switch time
250          * adding TSF as one of the factor for when to switch
251          */
252         if ((priv->ucode_beacon_time > tsf_low) && beacon_interval) {
253                 if (switch_count > ((priv->ucode_beacon_time - tsf_low) /
254                     beacon_interval)) {
255                         switch_count -= (priv->ucode_beacon_time -
256                                 tsf_low) / beacon_interval;
257                 } else
258                         switch_count = 0;
259         }
260         if (switch_count <= 1)
261                 cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
262         else {
263                 switch_time_in_usec =
264                         vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
265                 ucode_switch_time = iwl_usecs_to_beacons(priv,
266                                                          switch_time_in_usec,
267                                                          beacon_interval);
268                 cmd.switch_time = iwl_add_beacon_time(priv,
269                                                       priv->ucode_beacon_time,
270                                                       ucode_switch_time,
271                                                       beacon_interval);
272         }
273         IWL_DEBUG_11H(priv, "uCode time for the switch is 0x%x\n",
274                       cmd.switch_time);
275         ch_info = iwl_get_channel_info(priv, priv->band, ch);
276         if (ch_info)
277                 cmd.expect_beacon = is_channel_radar(ch_info);
278         else {
279                 IWL_ERR(priv, "invalid channel switch from %u to %u\n",
280                         ctx->active.channel, ch);
281                 return -EFAULT;
282         }
283
284         return iwl_dvm_send_cmd(priv, &hcmd);
285 }
286
287 static struct iwl_lib_ops iwl5000_lib = {
288         .set_hw_params = iwl5000_hw_set_hw_params,
289         .set_channel_switch = iwl5000_hw_channel_switch,
290         .nic_config = iwl5000_nic_config,
291         .eeprom_ops = {
292                 .regulatory_bands = {
293                         EEPROM_REG_BAND_1_CHANNELS,
294                         EEPROM_REG_BAND_2_CHANNELS,
295                         EEPROM_REG_BAND_3_CHANNELS,
296                         EEPROM_REG_BAND_4_CHANNELS,
297                         EEPROM_REG_BAND_5_CHANNELS,
298                         EEPROM_REG_BAND_24_HT40_CHANNELS,
299                         EEPROM_REG_BAND_52_HT40_CHANNELS
300                 },
301         },
302         .temperature = iwlagn_temperature,
303 };
304
305 static struct iwl_lib_ops iwl5150_lib = {
306         .set_hw_params = iwl5150_hw_set_hw_params,
307         .set_channel_switch = iwl5000_hw_channel_switch,
308         .nic_config = iwl5000_nic_config,
309         .eeprom_ops = {
310                 .regulatory_bands = {
311                         EEPROM_REG_BAND_1_CHANNELS,
312                         EEPROM_REG_BAND_2_CHANNELS,
313                         EEPROM_REG_BAND_3_CHANNELS,
314                         EEPROM_REG_BAND_4_CHANNELS,
315                         EEPROM_REG_BAND_5_CHANNELS,
316                         EEPROM_REG_BAND_24_HT40_CHANNELS,
317                         EEPROM_REG_BAND_52_HT40_CHANNELS
318                 },
319         },
320         .temperature = iwl5150_temperature,
321 };
322
323 static struct iwl_base_params iwl5000_base_params = {
324         .eeprom_size = IWLAGN_EEPROM_IMG_SIZE,
325         .num_of_queues = IWLAGN_NUM_QUEUES,
326         .num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
327         .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
328         .led_compensation = 51,
329         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
330         .chain_noise_scale = 1000,
331         .wd_timeout = IWL_LONG_WD_TIMEOUT,
332         .max_event_log_size = 512,
333         .no_idle_support = true,
334         .wd_disable = true,
335 };
336 static struct iwl_ht_params iwl5000_ht_params = {
337         .ht_greenfield_support = true,
338 };
339
340 #define IWL_DEVICE_5000                                         \
341         .fw_name_pre = IWL5000_FW_PRE,                          \
342         .ucode_api_max = IWL5000_UCODE_API_MAX,                 \
343         .ucode_api_min = IWL5000_UCODE_API_MIN,                 \
344         .max_inst_size = IWLAGN_RTC_INST_SIZE,                  \
345         .max_data_size = IWLAGN_RTC_DATA_SIZE,                  \
346         .eeprom_ver = EEPROM_5000_EEPROM_VERSION,               \
347         .eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,       \
348         .lib = &iwl5000_lib,                                    \
349         .base_params = &iwl5000_base_params,                    \
350         .led_mode = IWL_LED_BLINK
351
352 const struct iwl_cfg iwl5300_agn_cfg = {
353         .name = "Intel(R) Ultimate N WiFi Link 5300 AGN",
354         IWL_DEVICE_5000,
355         /* at least EEPROM 0x11A has wrong info */
356         .valid_tx_ant = ANT_ABC,        /* .cfg overwrite */
357         .valid_rx_ant = ANT_ABC,        /* .cfg overwrite */
358         .ht_params = &iwl5000_ht_params,
359 };
360
361 const struct iwl_cfg iwl5100_bgn_cfg = {
362         .name = "Intel(R) WiFi Link 5100 BGN",
363         IWL_DEVICE_5000,
364         .valid_tx_ant = ANT_B,          /* .cfg overwrite */
365         .valid_rx_ant = ANT_AB,         /* .cfg overwrite */
366         .ht_params = &iwl5000_ht_params,
367 };
368
369 const struct iwl_cfg iwl5100_abg_cfg = {
370         .name = "Intel(R) WiFi Link 5100 ABG",
371         IWL_DEVICE_5000,
372         .valid_tx_ant = ANT_B,          /* .cfg overwrite */
373         .valid_rx_ant = ANT_AB,         /* .cfg overwrite */
374 };
375
376 const struct iwl_cfg iwl5100_agn_cfg = {
377         .name = "Intel(R) WiFi Link 5100 AGN",
378         IWL_DEVICE_5000,
379         .valid_tx_ant = ANT_B,          /* .cfg overwrite */
380         .valid_rx_ant = ANT_AB,         /* .cfg overwrite */
381         .ht_params = &iwl5000_ht_params,
382 };
383
384 const struct iwl_cfg iwl5350_agn_cfg = {
385         .name = "Intel(R) WiMAX/WiFi Link 5350 AGN",
386         .fw_name_pre = IWL5000_FW_PRE,
387         .ucode_api_max = IWL5000_UCODE_API_MAX,
388         .ucode_api_min = IWL5000_UCODE_API_MIN,
389         .max_inst_size = IWLAGN_RTC_INST_SIZE,
390         .max_data_size = IWLAGN_RTC_DATA_SIZE,
391         .eeprom_ver = EEPROM_5050_EEPROM_VERSION,
392         .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
393         .lib = &iwl5000_lib,
394         .base_params = &iwl5000_base_params,
395         .ht_params = &iwl5000_ht_params,
396         .led_mode = IWL_LED_BLINK,
397         .internal_wimax_coex = true,
398 };
399
400 #define IWL_DEVICE_5150                                         \
401         .fw_name_pre = IWL5150_FW_PRE,                          \
402         .ucode_api_max = IWL5150_UCODE_API_MAX,                 \
403         .ucode_api_min = IWL5150_UCODE_API_MIN,                 \
404         .max_inst_size = IWLAGN_RTC_INST_SIZE,                  \
405         .max_data_size = IWLAGN_RTC_DATA_SIZE,                  \
406         .eeprom_ver = EEPROM_5050_EEPROM_VERSION,               \
407         .eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,       \
408         .lib = &iwl5150_lib,                                    \
409         .base_params = &iwl5000_base_params,                    \
410         .no_xtal_calib = true,                                  \
411         .led_mode = IWL_LED_BLINK,                              \
412         .internal_wimax_coex = true
413
414 const struct iwl_cfg iwl5150_agn_cfg = {
415         .name = "Intel(R) WiMAX/WiFi Link 5150 AGN",
416         IWL_DEVICE_5150,
417         .ht_params = &iwl5000_ht_params,
418
419 };
420
421 const struct iwl_cfg iwl5150_abg_cfg = {
422         .name = "Intel(R) WiMAX/WiFi Link 5150 ABG",
423         IWL_DEVICE_5150,
424 };
425
426 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
427 MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));