]> git.karo-electronics.de Git - linux-beck.git/blob - drivers/net/wireless/iwlwifi/iwl-agn-lib.c
powerpc/powermac: Make auto-loading of therm_pm72 possible
[linux-beck.git] / drivers / net / wireless / iwlwifi / iwl-agn-lib.c
1 /******************************************************************************
2  *
3  * GPL LICENSE SUMMARY
4  *
5  * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of version 2 of the GNU General Public License as
9  * published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful, but
12  * WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
14  * General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
19  * USA
20  *
21  * The full GNU General Public License is included in this distribution
22  * in the file called LICENSE.GPL.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *
28  *****************************************************************************/
29 #include <linux/etherdevice.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33 #include <linux/sched.h>
34
35 #include "iwl-dev.h"
36 #include "iwl-core.h"
37 #include "iwl-io.h"
38 #include "iwl-helpers.h"
39 #include "iwl-agn-hw.h"
40 #include "iwl-agn.h"
41 #include "iwl-sta.h"
42
43 static inline u32 iwlagn_get_scd_ssn(struct iwlagn_tx_resp *tx_resp)
44 {
45         return le32_to_cpup((__le32 *)&tx_resp->status +
46                             tx_resp->frame_count) & MAX_SN;
47 }
48
49 static void iwlagn_count_tx_err_status(struct iwl_priv *priv, u16 status)
50 {
51         status &= TX_STATUS_MSK;
52
53         switch (status) {
54         case TX_STATUS_POSTPONE_DELAY:
55                 priv->_agn.reply_tx_stats.pp_delay++;
56                 break;
57         case TX_STATUS_POSTPONE_FEW_BYTES:
58                 priv->_agn.reply_tx_stats.pp_few_bytes++;
59                 break;
60         case TX_STATUS_POSTPONE_BT_PRIO:
61                 priv->_agn.reply_tx_stats.pp_bt_prio++;
62                 break;
63         case TX_STATUS_POSTPONE_QUIET_PERIOD:
64                 priv->_agn.reply_tx_stats.pp_quiet_period++;
65                 break;
66         case TX_STATUS_POSTPONE_CALC_TTAK:
67                 priv->_agn.reply_tx_stats.pp_calc_ttak++;
68                 break;
69         case TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY:
70                 priv->_agn.reply_tx_stats.int_crossed_retry++;
71                 break;
72         case TX_STATUS_FAIL_SHORT_LIMIT:
73                 priv->_agn.reply_tx_stats.short_limit++;
74                 break;
75         case TX_STATUS_FAIL_LONG_LIMIT:
76                 priv->_agn.reply_tx_stats.long_limit++;
77                 break;
78         case TX_STATUS_FAIL_FIFO_UNDERRUN:
79                 priv->_agn.reply_tx_stats.fifo_underrun++;
80                 break;
81         case TX_STATUS_FAIL_DRAIN_FLOW:
82                 priv->_agn.reply_tx_stats.drain_flow++;
83                 break;
84         case TX_STATUS_FAIL_RFKILL_FLUSH:
85                 priv->_agn.reply_tx_stats.rfkill_flush++;
86                 break;
87         case TX_STATUS_FAIL_LIFE_EXPIRE:
88                 priv->_agn.reply_tx_stats.life_expire++;
89                 break;
90         case TX_STATUS_FAIL_DEST_PS:
91                 priv->_agn.reply_tx_stats.dest_ps++;
92                 break;
93         case TX_STATUS_FAIL_HOST_ABORTED:
94                 priv->_agn.reply_tx_stats.host_abort++;
95                 break;
96         case TX_STATUS_FAIL_BT_RETRY:
97                 priv->_agn.reply_tx_stats.bt_retry++;
98                 break;
99         case TX_STATUS_FAIL_STA_INVALID:
100                 priv->_agn.reply_tx_stats.sta_invalid++;
101                 break;
102         case TX_STATUS_FAIL_FRAG_DROPPED:
103                 priv->_agn.reply_tx_stats.frag_drop++;
104                 break;
105         case TX_STATUS_FAIL_TID_DISABLE:
106                 priv->_agn.reply_tx_stats.tid_disable++;
107                 break;
108         case TX_STATUS_FAIL_FIFO_FLUSHED:
109                 priv->_agn.reply_tx_stats.fifo_flush++;
110                 break;
111         case TX_STATUS_FAIL_INSUFFICIENT_CF_POLL:
112                 priv->_agn.reply_tx_stats.insuff_cf_poll++;
113                 break;
114         case TX_STATUS_FAIL_PASSIVE_NO_RX:
115                 priv->_agn.reply_tx_stats.fail_hw_drop++;
116                 break;
117         case TX_STATUS_FAIL_NO_BEACON_ON_RADAR:
118                 priv->_agn.reply_tx_stats.sta_color_mismatch++;
119                 break;
120         default:
121                 priv->_agn.reply_tx_stats.unknown++;
122                 break;
123         }
124 }
125
126 static void iwlagn_count_agg_tx_err_status(struct iwl_priv *priv, u16 status)
127 {
128         status &= AGG_TX_STATUS_MSK;
129
130         switch (status) {
131         case AGG_TX_STATE_UNDERRUN_MSK:
132                 priv->_agn.reply_agg_tx_stats.underrun++;
133                 break;
134         case AGG_TX_STATE_BT_PRIO_MSK:
135                 priv->_agn.reply_agg_tx_stats.bt_prio++;
136                 break;
137         case AGG_TX_STATE_FEW_BYTES_MSK:
138                 priv->_agn.reply_agg_tx_stats.few_bytes++;
139                 break;
140         case AGG_TX_STATE_ABORT_MSK:
141                 priv->_agn.reply_agg_tx_stats.abort++;
142                 break;
143         case AGG_TX_STATE_LAST_SENT_TTL_MSK:
144                 priv->_agn.reply_agg_tx_stats.last_sent_ttl++;
145                 break;
146         case AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK:
147                 priv->_agn.reply_agg_tx_stats.last_sent_try++;
148                 break;
149         case AGG_TX_STATE_LAST_SENT_BT_KILL_MSK:
150                 priv->_agn.reply_agg_tx_stats.last_sent_bt_kill++;
151                 break;
152         case AGG_TX_STATE_SCD_QUERY_MSK:
153                 priv->_agn.reply_agg_tx_stats.scd_query++;
154                 break;
155         case AGG_TX_STATE_TEST_BAD_CRC32_MSK:
156                 priv->_agn.reply_agg_tx_stats.bad_crc32++;
157                 break;
158         case AGG_TX_STATE_RESPONSE_MSK:
159                 priv->_agn.reply_agg_tx_stats.response++;
160                 break;
161         case AGG_TX_STATE_DUMP_TX_MSK:
162                 priv->_agn.reply_agg_tx_stats.dump_tx++;
163                 break;
164         case AGG_TX_STATE_DELAY_TX_MSK:
165                 priv->_agn.reply_agg_tx_stats.delay_tx++;
166                 break;
167         default:
168                 priv->_agn.reply_agg_tx_stats.unknown++;
169                 break;
170         }
171 }
172
173 static void iwlagn_set_tx_status(struct iwl_priv *priv,
174                                  struct ieee80211_tx_info *info,
175                                  struct iwlagn_tx_resp *tx_resp,
176                                  int txq_id, bool is_agg)
177 {
178         u16  status = le16_to_cpu(tx_resp->status.status);
179
180         info->status.rates[0].count = tx_resp->failure_frame + 1;
181         if (is_agg)
182                 info->flags &= ~IEEE80211_TX_CTL_AMPDU;
183         info->flags |= iwl_tx_status_to_mac80211(status);
184         iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags),
185                                     info);
186         if (!iwl_is_tx_success(status))
187                 iwlagn_count_tx_err_status(priv, status);
188
189         IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x) rate_n_flags "
190                            "0x%x retries %d\n",
191                            txq_id,
192                            iwl_get_tx_fail_reason(status), status,
193                            le32_to_cpu(tx_resp->rate_n_flags),
194                            tx_resp->failure_frame);
195 }
196
197 #ifdef CONFIG_IWLWIFI_DEBUG
198 #define AGG_TX_STATE_FAIL(x) case AGG_TX_STATE_ ## x: return #x
199
200 const char *iwl_get_agg_tx_fail_reason(u16 status)
201 {
202         status &= AGG_TX_STATUS_MSK;
203         switch (status) {
204         case AGG_TX_STATE_TRANSMITTED:
205                 return "SUCCESS";
206                 AGG_TX_STATE_FAIL(UNDERRUN_MSK);
207                 AGG_TX_STATE_FAIL(BT_PRIO_MSK);
208                 AGG_TX_STATE_FAIL(FEW_BYTES_MSK);
209                 AGG_TX_STATE_FAIL(ABORT_MSK);
210                 AGG_TX_STATE_FAIL(LAST_SENT_TTL_MSK);
211                 AGG_TX_STATE_FAIL(LAST_SENT_TRY_CNT_MSK);
212                 AGG_TX_STATE_FAIL(LAST_SENT_BT_KILL_MSK);
213                 AGG_TX_STATE_FAIL(SCD_QUERY_MSK);
214                 AGG_TX_STATE_FAIL(TEST_BAD_CRC32_MSK);
215                 AGG_TX_STATE_FAIL(RESPONSE_MSK);
216                 AGG_TX_STATE_FAIL(DUMP_TX_MSK);
217                 AGG_TX_STATE_FAIL(DELAY_TX_MSK);
218         }
219
220         return "UNKNOWN";
221 }
222 #endif /* CONFIG_IWLWIFI_DEBUG */
223
224 static int iwlagn_tx_status_reply_tx(struct iwl_priv *priv,
225                                       struct iwl_ht_agg *agg,
226                                       struct iwlagn_tx_resp *tx_resp,
227                                       int txq_id, u16 start_idx)
228 {
229         u16 status;
230         struct agg_tx_status *frame_status = &tx_resp->status;
231         struct ieee80211_hdr *hdr = NULL;
232         int i, sh, idx;
233         u16 seq;
234
235         if (agg->wait_for_ba)
236                 IWL_DEBUG_TX_REPLY(priv, "got tx response w/o block-ack\n");
237
238         agg->frame_count = tx_resp->frame_count;
239         agg->start_idx = start_idx;
240         agg->rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
241         agg->bitmap = 0;
242
243         /* # frames attempted by Tx command */
244         if (agg->frame_count == 1) {
245                 /* Only one frame was attempted; no block-ack will arrive */
246                 idx = start_idx;
247
248                 IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, StartIdx=%d idx=%d\n",
249                                    agg->frame_count, agg->start_idx, idx);
250                 iwlagn_set_tx_status(priv,
251                                      IEEE80211_SKB_CB(
252                                         priv->txq[txq_id].txb[idx].skb),
253                                      tx_resp, txq_id, true);
254                 agg->wait_for_ba = 0;
255         } else {
256                 /* Two or more frames were attempted; expect block-ack */
257                 u64 bitmap = 0;
258
259                 /*
260                  * Start is the lowest frame sent. It may not be the first
261                  * frame in the batch; we figure this out dynamically during
262                  * the following loop.
263                  */
264                 int start = agg->start_idx;
265
266                 /* Construct bit-map of pending frames within Tx window */
267                 for (i = 0; i < agg->frame_count; i++) {
268                         u16 sc;
269                         status = le16_to_cpu(frame_status[i].status);
270                         seq  = le16_to_cpu(frame_status[i].sequence);
271                         idx = SEQ_TO_INDEX(seq);
272                         txq_id = SEQ_TO_QUEUE(seq);
273
274                         if (status & AGG_TX_STATUS_MSK)
275                                 iwlagn_count_agg_tx_err_status(priv, status);
276
277                         if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
278                                       AGG_TX_STATE_ABORT_MSK))
279                                 continue;
280
281                         IWL_DEBUG_TX_REPLY(priv, "FrameCnt = %d, txq_id=%d idx=%d\n",
282                                            agg->frame_count, txq_id, idx);
283                         IWL_DEBUG_TX_REPLY(priv, "status %s (0x%08x), "
284                                            "try-count (0x%08x)\n",
285                                            iwl_get_agg_tx_fail_reason(status),
286                                            status & AGG_TX_STATUS_MSK,
287                                            status & AGG_TX_TRY_MSK);
288
289                         hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
290                         if (!hdr) {
291                                 IWL_ERR(priv,
292                                         "BUG_ON idx doesn't point to valid skb"
293                                         " idx=%d, txq_id=%d\n", idx, txq_id);
294                                 return -1;
295                         }
296
297                         sc = le16_to_cpu(hdr->seq_ctrl);
298                         if (idx != (SEQ_TO_SN(sc) & 0xff)) {
299                                 IWL_ERR(priv,
300                                         "BUG_ON idx doesn't match seq control"
301                                         " idx=%d, seq_idx=%d, seq=%d\n",
302                                           idx, SEQ_TO_SN(sc),
303                                           hdr->seq_ctrl);
304                                 return -1;
305                         }
306
307                         IWL_DEBUG_TX_REPLY(priv, "AGG Frame i=%d idx %d seq=%d\n",
308                                            i, idx, SEQ_TO_SN(sc));
309
310                         /*
311                          * sh -> how many frames ahead of the starting frame is
312                          * the current one?
313                          *
314                          * Note that all frames sent in the batch must be in a
315                          * 64-frame window, so this number should be in [0,63].
316                          * If outside of this window, then we've found a new
317                          * "first" frame in the batch and need to change start.
318                          */
319                         sh = idx - start;
320
321                         /*
322                          * If >= 64, out of window. start must be at the front
323                          * of the circular buffer, idx must be near the end of
324                          * the buffer, and idx is the new "first" frame. Shift
325                          * the indices around.
326                          */
327                         if (sh >= 64) {
328                                 /* Shift bitmap by start - idx, wrapped */
329                                 sh = 0x100 - idx + start;
330                                 bitmap = bitmap << sh;
331                                 /* Now idx is the new start so sh = 0 */
332                                 sh = 0;
333                                 start = idx;
334                         /*
335                          * If <= -64 then wraps the 256-pkt circular buffer
336                          * (e.g., start = 255 and idx = 0, sh should be 1)
337                          */
338                         } else if (sh <= -64) {
339                                 sh  = 0x100 - start + idx;
340                         /*
341                          * If < 0 but > -64, out of window. idx is before start
342                          * but not wrapped. Shift the indices around.
343                          */
344                         } else if (sh < 0) {
345                                 /* Shift by how far start is ahead of idx */
346                                 sh = start - idx;
347                                 bitmap = bitmap << sh;
348                                 /* Now idx is the new start so sh = 0 */
349                                 start = idx;
350                                 sh = 0;
351                         }
352                         /* Sequence number start + sh was sent in this batch */
353                         bitmap |= 1ULL << sh;
354                         IWL_DEBUG_TX_REPLY(priv, "start=%d bitmap=0x%llx\n",
355                                            start, (unsigned long long)bitmap);
356                 }
357
358                 /*
359                  * Store the bitmap and possibly the new start, if we wrapped
360                  * the buffer above
361                  */
362                 agg->bitmap = bitmap;
363                 agg->start_idx = start;
364                 IWL_DEBUG_TX_REPLY(priv, "Frames %d start_idx=%d bitmap=0x%llx\n",
365                                    agg->frame_count, agg->start_idx,
366                                    (unsigned long long)agg->bitmap);
367
368                 if (bitmap)
369                         agg->wait_for_ba = 1;
370         }
371         return 0;
372 }
373
374 void iwl_check_abort_status(struct iwl_priv *priv,
375                             u8 frame_count, u32 status)
376 {
377         if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
378                 IWL_ERR(priv, "Tx flush command to flush out all frames\n");
379                 if (!test_bit(STATUS_EXIT_PENDING, &priv->status))
380                         queue_work(priv->workqueue, &priv->tx_flush);
381         }
382 }
383
384 static void iwlagn_rx_reply_tx(struct iwl_priv *priv,
385                                 struct iwl_rx_mem_buffer *rxb)
386 {
387         struct iwl_rx_packet *pkt = rxb_addr(rxb);
388         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
389         int txq_id = SEQ_TO_QUEUE(sequence);
390         int index = SEQ_TO_INDEX(sequence);
391         struct iwl_tx_queue *txq = &priv->txq[txq_id];
392         struct ieee80211_tx_info *info;
393         struct iwlagn_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
394         u32  status = le16_to_cpu(tx_resp->status.status);
395         int tid;
396         int sta_id;
397         int freed;
398         unsigned long flags;
399
400         if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
401                 IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
402                           "is out of range [0-%d] %d %d\n", txq_id,
403                           index, txq->q.n_bd, txq->q.write_ptr,
404                           txq->q.read_ptr);
405                 return;
406         }
407
408         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
409         memset(&info->status, 0, sizeof(info->status));
410
411         tid = (tx_resp->ra_tid & IWLAGN_TX_RES_TID_MSK) >>
412                 IWLAGN_TX_RES_TID_POS;
413         sta_id = (tx_resp->ra_tid & IWLAGN_TX_RES_RA_MSK) >>
414                 IWLAGN_TX_RES_RA_POS;
415
416         spin_lock_irqsave(&priv->sta_lock, flags);
417         if (txq->sched_retry) {
418                 const u32 scd_ssn = iwlagn_get_scd_ssn(tx_resp);
419                 struct iwl_ht_agg *agg;
420
421                 agg = &priv->stations[sta_id].tid[tid].agg;
422                 /*
423                  * If the BT kill count is non-zero, we'll get this
424                  * notification again.
425                  */
426                 if (tx_resp->bt_kill_count && tx_resp->frame_count == 1 &&
427                     priv->cfg->bt_params &&
428                     priv->cfg->bt_params->advanced_bt_coexist) {
429                         IWL_WARN(priv, "receive reply tx with bt_kill\n");
430                 }
431                 iwlagn_tx_status_reply_tx(priv, agg, tx_resp, txq_id, index);
432
433                 /* check if BAR is needed */
434                 if ((tx_resp->frame_count == 1) && !iwl_is_tx_success(status))
435                         info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
436
437                 if (txq->q.read_ptr != (scd_ssn & 0xff)) {
438                         index = iwl_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
439                         IWL_DEBUG_TX_REPLY(priv, "Retry scheduler reclaim "
440                                         "scd_ssn=%d idx=%d txq=%d swq=%d\n",
441                                         scd_ssn , index, txq_id, txq->swq_id);
442
443                         freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
444                         iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
445
446                         if (priv->mac80211_registered &&
447                             (iwl_queue_space(&txq->q) > txq->q.low_mark) &&
448                             (agg->state != IWL_EMPTYING_HW_QUEUE_DELBA)) {
449                                 if (agg->state == IWL_AGG_OFF)
450                                         iwl_wake_queue(priv, txq_id);
451                                 else
452                                         iwl_wake_queue(priv, txq->swq_id);
453                         }
454                 }
455         } else {
456                 BUG_ON(txq_id != txq->swq_id);
457                 iwlagn_set_tx_status(priv, info, tx_resp, txq_id, false);
458                 freed = iwlagn_tx_queue_reclaim(priv, txq_id, index);
459                 iwl_free_tfds_in_queue(priv, sta_id, tid, freed);
460
461                 if (priv->mac80211_registered &&
462                     (iwl_queue_space(&txq->q) > txq->q.low_mark))
463                         iwl_wake_queue(priv, txq_id);
464         }
465
466         iwlagn_txq_check_empty(priv, sta_id, tid, txq_id);
467
468         iwl_check_abort_status(priv, tx_resp->frame_count, status);
469         spin_unlock_irqrestore(&priv->sta_lock, flags);
470 }
471
472 void iwlagn_rx_handler_setup(struct iwl_priv *priv)
473 {
474         /* init calibration handlers */
475         priv->rx_handlers[CALIBRATION_RES_NOTIFICATION] =
476                                         iwlagn_rx_calib_result;
477         priv->rx_handlers[CALIBRATION_COMPLETE_NOTIFICATION] =
478                                         iwlagn_rx_calib_complete;
479         priv->rx_handlers[REPLY_TX] = iwlagn_rx_reply_tx;
480 }
481
482 void iwlagn_setup_deferred_work(struct iwl_priv *priv)
483 {
484         /* in agn, the tx power calibration is done in uCode */
485         priv->disable_tx_power_cal = 1;
486 }
487
488 int iwlagn_hw_valid_rtc_data_addr(u32 addr)
489 {
490         return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&
491                 (addr < IWLAGN_RTC_DATA_UPPER_BOUND);
492 }
493
494 int iwlagn_send_tx_power(struct iwl_priv *priv)
495 {
496         struct iwlagn_tx_power_dbm_cmd tx_power_cmd;
497         u8 tx_ant_cfg_cmd;
498
499         /* half dBm need to multiply */
500         tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
501
502         if (priv->tx_power_lmt_in_half_dbm &&
503             priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
504                 /*
505                  * For the newer devices which using enhanced/extend tx power
506                  * table in EEPROM, the format is in half dBm. driver need to
507                  * convert to dBm format before report to mac80211.
508                  * By doing so, there is a possibility of 1/2 dBm resolution
509                  * lost. driver will perform "round-up" operation before
510                  * reporting, but it will cause 1/2 dBm tx power over the
511                  * regulatory limit. Perform the checking here, if the
512                  * "tx_power_user_lmt" is higher than EEPROM value (in
513                  * half-dBm format), lower the tx power based on EEPROM
514                  */
515                 tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
516         }
517         tx_power_cmd.flags = IWLAGN_TX_POWER_NO_CLOSED;
518         tx_power_cmd.srv_chan_lmt = IWLAGN_TX_POWER_AUTO;
519
520         if (IWL_UCODE_API(priv->ucode_ver) == 1)
521                 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD_V1;
522         else
523                 tx_ant_cfg_cmd = REPLY_TX_POWER_DBM_CMD;
524
525         return  iwl_send_cmd_pdu_async(priv, tx_ant_cfg_cmd,
526                                        sizeof(tx_power_cmd), &tx_power_cmd,
527                                        NULL);
528 }
529
530 void iwlagn_temperature(struct iwl_priv *priv)
531 {
532         /* store temperature from statistics (in Celsius) */
533         priv->temperature =
534                 le32_to_cpu(priv->_agn.statistics.general.common.temperature);
535         iwl_tt_handler(priv);
536 }
537
538 u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv)
539 {
540         struct iwl_eeprom_calib_hdr {
541                 u8 version;
542                 u8 pa_type;
543                 u16 voltage;
544         } *hdr;
545
546         hdr = (struct iwl_eeprom_calib_hdr *)iwl_eeprom_query_addr(priv,
547                                                         EEPROM_CALIB_ALL);
548         return hdr->version;
549
550 }
551
552 /*
553  * EEPROM
554  */
555 static u32 eeprom_indirect_address(const struct iwl_priv *priv, u32 address)
556 {
557         u16 offset = 0;
558
559         if ((address & INDIRECT_ADDRESS) == 0)
560                 return address;
561
562         switch (address & INDIRECT_TYPE_MSK) {
563         case INDIRECT_HOST:
564                 offset = iwl_eeprom_query16(priv, EEPROM_LINK_HOST);
565                 break;
566         case INDIRECT_GENERAL:
567                 offset = iwl_eeprom_query16(priv, EEPROM_LINK_GENERAL);
568                 break;
569         case INDIRECT_REGULATORY:
570                 offset = iwl_eeprom_query16(priv, EEPROM_LINK_REGULATORY);
571                 break;
572         case INDIRECT_CALIBRATION:
573                 offset = iwl_eeprom_query16(priv, EEPROM_LINK_CALIBRATION);
574                 break;
575         case INDIRECT_PROCESS_ADJST:
576                 offset = iwl_eeprom_query16(priv, EEPROM_LINK_PROCESS_ADJST);
577                 break;
578         case INDIRECT_OTHERS:
579                 offset = iwl_eeprom_query16(priv, EEPROM_LINK_OTHERS);
580                 break;
581         default:
582                 IWL_ERR(priv, "illegal indirect type: 0x%X\n",
583                 address & INDIRECT_TYPE_MSK);
584                 break;
585         }
586
587         /* translate the offset from words to byte */
588         return (address & ADDRESS_MSK) + (offset << 1);
589 }
590
591 const u8 *iwlagn_eeprom_query_addr(const struct iwl_priv *priv,
592                                            size_t offset)
593 {
594         u32 address = eeprom_indirect_address(priv, offset);
595         BUG_ON(address >= priv->cfg->base_params->eeprom_size);
596         return &priv->eeprom[address];
597 }
598
599 struct iwl_mod_params iwlagn_mod_params = {
600         .amsdu_size_8K = 1,
601         .restart_fw = 1,
602         /* the rest are 0 by default */
603 };
604
605 void iwlagn_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
606 {
607         unsigned long flags;
608         int i;
609         spin_lock_irqsave(&rxq->lock, flags);
610         INIT_LIST_HEAD(&rxq->rx_free);
611         INIT_LIST_HEAD(&rxq->rx_used);
612         /* Fill the rx_used queue with _all_ of the Rx buffers */
613         for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
614                 /* In the reset function, these buffers may have been allocated
615                  * to an SKB, so we need to unmap and free potential storage */
616                 if (rxq->pool[i].page != NULL) {
617                         pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
618                                 PAGE_SIZE << priv->hw_params.rx_page_order,
619                                 PCI_DMA_FROMDEVICE);
620                         __iwl_free_pages(priv, rxq->pool[i].page);
621                         rxq->pool[i].page = NULL;
622                 }
623                 list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
624         }
625
626         for (i = 0; i < RX_QUEUE_SIZE; i++)
627                 rxq->queue[i] = NULL;
628
629         /* Set us so that we have processed and used all buffers, but have
630          * not restocked the Rx queue with fresh buffers */
631         rxq->read = rxq->write = 0;
632         rxq->write_actual = 0;
633         rxq->free_count = 0;
634         spin_unlock_irqrestore(&rxq->lock, flags);
635 }
636
637 int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
638 {
639         u32 rb_size;
640         const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
641         u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
642
643         if (!priv->cfg->base_params->use_isr_legacy)
644                 rb_timeout = RX_RB_TIMEOUT;
645
646         if (priv->cfg->mod_params->amsdu_size_8K)
647                 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
648         else
649                 rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
650
651         /* Stop Rx DMA */
652         iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
653
654         /* Reset driver's Rx queue write index */
655         iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
656
657         /* Tell device where to find RBD circular buffer in DRAM */
658         iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
659                            (u32)(rxq->bd_dma >> 8));
660
661         /* Tell device where in DRAM to update its Rx status */
662         iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
663                            rxq->rb_stts_dma >> 4);
664
665         /* Enable Rx DMA
666          * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
667          *      the credit mechanism in 5000 HW RX FIFO
668          * Direct rx interrupts to hosts
669          * Rx buffer size 4 or 8k
670          * RB timeout 0x10
671          * 256 RBDs
672          */
673         iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
674                            FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
675                            FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
676                            FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
677                            FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
678                            rb_size|
679                            (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
680                            (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
681
682         /* Set interrupt coalescing timer to default (2048 usecs) */
683         iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
684
685         return 0;
686 }
687
688 static void iwlagn_set_pwr_vmain(struct iwl_priv *priv)
689 {
690 /*
691  * (for documentation purposes)
692  * to set power to V_AUX, do:
693
694                 if (pci_pme_capable(priv->pci_dev, PCI_D3cold))
695                         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
696                                                APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
697                                                ~APMG_PS_CTRL_MSK_PWR_SRC);
698  */
699
700         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
701                                APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
702                                ~APMG_PS_CTRL_MSK_PWR_SRC);
703 }
704
705 int iwlagn_hw_nic_init(struct iwl_priv *priv)
706 {
707         unsigned long flags;
708         struct iwl_rx_queue *rxq = &priv->rxq;
709         int ret;
710
711         /* nic_init */
712         spin_lock_irqsave(&priv->lock, flags);
713         priv->cfg->ops->lib->apm_ops.init(priv);
714
715         /* Set interrupt coalescing calibration timer to default (512 usecs) */
716         iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_CALIB_TIMEOUT_DEF);
717
718         spin_unlock_irqrestore(&priv->lock, flags);
719
720         iwlagn_set_pwr_vmain(priv);
721
722         priv->cfg->ops->lib->apm_ops.config(priv);
723
724         /* Allocate the RX queue, or reset if it is already allocated */
725         if (!rxq->bd) {
726                 ret = iwl_rx_queue_alloc(priv);
727                 if (ret) {
728                         IWL_ERR(priv, "Unable to initialize Rx queue\n");
729                         return -ENOMEM;
730                 }
731         } else
732                 iwlagn_rx_queue_reset(priv, rxq);
733
734         iwlagn_rx_replenish(priv);
735
736         iwlagn_rx_init(priv, rxq);
737
738         spin_lock_irqsave(&priv->lock, flags);
739
740         rxq->need_update = 1;
741         iwl_rx_queue_update_write_ptr(priv, rxq);
742
743         spin_unlock_irqrestore(&priv->lock, flags);
744
745         /* Allocate or reset and init all Tx and Command queues */
746         if (!priv->txq) {
747                 ret = iwlagn_txq_ctx_alloc(priv);
748                 if (ret)
749                         return ret;
750         } else
751                 iwlagn_txq_ctx_reset(priv);
752
753         set_bit(STATUS_INIT, &priv->status);
754
755         return 0;
756 }
757
758 /**
759  * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
760  */
761 static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv,
762                                           dma_addr_t dma_addr)
763 {
764         return cpu_to_le32((u32)(dma_addr >> 8));
765 }
766
767 /**
768  * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
769  *
770  * If there are slots in the RX queue that need to be restocked,
771  * and we have free pre-allocated buffers, fill the ranks as much
772  * as we can, pulling from rx_free.
773  *
774  * This moves the 'write' index forward to catch up with 'processed', and
775  * also updates the memory address in the firmware to reference the new
776  * target buffer.
777  */
778 void iwlagn_rx_queue_restock(struct iwl_priv *priv)
779 {
780         struct iwl_rx_queue *rxq = &priv->rxq;
781         struct list_head *element;
782         struct iwl_rx_mem_buffer *rxb;
783         unsigned long flags;
784
785         spin_lock_irqsave(&rxq->lock, flags);
786         while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
787                 /* The overwritten rxb must be a used one */
788                 rxb = rxq->queue[rxq->write];
789                 BUG_ON(rxb && rxb->page);
790
791                 /* Get next free Rx buffer, remove from free list */
792                 element = rxq->rx_free.next;
793                 rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
794                 list_del(element);
795
796                 /* Point to Rx buffer via next RBD in circular buffer */
797                 rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv,
798                                                               rxb->page_dma);
799                 rxq->queue[rxq->write] = rxb;
800                 rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
801                 rxq->free_count--;
802         }
803         spin_unlock_irqrestore(&rxq->lock, flags);
804         /* If the pre-allocated buffer pool is dropping low, schedule to
805          * refill it */
806         if (rxq->free_count <= RX_LOW_WATERMARK)
807                 queue_work(priv->workqueue, &priv->rx_replenish);
808
809
810         /* If we've added more space for the firmware to place data, tell it.
811          * Increment device's write pointer in multiples of 8. */
812         if (rxq->write_actual != (rxq->write & ~0x7)) {
813                 spin_lock_irqsave(&rxq->lock, flags);
814                 rxq->need_update = 1;
815                 spin_unlock_irqrestore(&rxq->lock, flags);
816                 iwl_rx_queue_update_write_ptr(priv, rxq);
817         }
818 }
819
820 /**
821  * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
822  *
823  * When moving to rx_free an SKB is allocated for the slot.
824  *
825  * Also restock the Rx queue via iwl_rx_queue_restock.
826  * This is called as a scheduled work item (except for during initialization)
827  */
828 void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority)
829 {
830         struct iwl_rx_queue *rxq = &priv->rxq;
831         struct list_head *element;
832         struct iwl_rx_mem_buffer *rxb;
833         struct page *page;
834         unsigned long flags;
835         gfp_t gfp_mask = priority;
836
837         while (1) {
838                 spin_lock_irqsave(&rxq->lock, flags);
839                 if (list_empty(&rxq->rx_used)) {
840                         spin_unlock_irqrestore(&rxq->lock, flags);
841                         return;
842                 }
843                 spin_unlock_irqrestore(&rxq->lock, flags);
844
845                 if (rxq->free_count > RX_LOW_WATERMARK)
846                         gfp_mask |= __GFP_NOWARN;
847
848                 if (priv->hw_params.rx_page_order > 0)
849                         gfp_mask |= __GFP_COMP;
850
851                 /* Alloc a new receive buffer */
852                 page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
853                 if (!page) {
854                         if (net_ratelimit())
855                                 IWL_DEBUG_INFO(priv, "alloc_pages failed, "
856                                                "order: %d\n",
857                                                priv->hw_params.rx_page_order);
858
859                         if ((rxq->free_count <= RX_LOW_WATERMARK) &&
860                             net_ratelimit())
861                                 IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
862                                          priority == GFP_ATOMIC ?  "GFP_ATOMIC" : "GFP_KERNEL",
863                                          rxq->free_count);
864                         /* We don't reschedule replenish work here -- we will
865                          * call the restock method and if it still needs
866                          * more buffers it will schedule replenish */
867                         return;
868                 }
869
870                 spin_lock_irqsave(&rxq->lock, flags);
871
872                 if (list_empty(&rxq->rx_used)) {
873                         spin_unlock_irqrestore(&rxq->lock, flags);
874                         __free_pages(page, priv->hw_params.rx_page_order);
875                         return;
876                 }
877                 element = rxq->rx_used.next;
878                 rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
879                 list_del(element);
880
881                 spin_unlock_irqrestore(&rxq->lock, flags);
882
883                 BUG_ON(rxb->page);
884                 rxb->page = page;
885                 /* Get physical address of the RB */
886                 rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
887                                 PAGE_SIZE << priv->hw_params.rx_page_order,
888                                 PCI_DMA_FROMDEVICE);
889                 /* dma address must be no more than 36 bits */
890                 BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
891                 /* and also 256 byte aligned! */
892                 BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
893
894                 spin_lock_irqsave(&rxq->lock, flags);
895
896                 list_add_tail(&rxb->list, &rxq->rx_free);
897                 rxq->free_count++;
898                 priv->alloc_rxb_page++;
899
900                 spin_unlock_irqrestore(&rxq->lock, flags);
901         }
902 }
903
904 void iwlagn_rx_replenish(struct iwl_priv *priv)
905 {
906         unsigned long flags;
907
908         iwlagn_rx_allocate(priv, GFP_KERNEL);
909
910         spin_lock_irqsave(&priv->lock, flags);
911         iwlagn_rx_queue_restock(priv);
912         spin_unlock_irqrestore(&priv->lock, flags);
913 }
914
915 void iwlagn_rx_replenish_now(struct iwl_priv *priv)
916 {
917         iwlagn_rx_allocate(priv, GFP_ATOMIC);
918
919         iwlagn_rx_queue_restock(priv);
920 }
921
922 /* Assumes that the skb field of the buffers in 'pool' is kept accurate.
923  * If an SKB has been detached, the POOL needs to have its SKB set to NULL
924  * This free routine walks the list of POOL entries and if SKB is set to
925  * non NULL it is unmapped and freed
926  */
927 void iwlagn_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
928 {
929         int i;
930         for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
931                 if (rxq->pool[i].page != NULL) {
932                         pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
933                                 PAGE_SIZE << priv->hw_params.rx_page_order,
934                                 PCI_DMA_FROMDEVICE);
935                         __iwl_free_pages(priv, rxq->pool[i].page);
936                         rxq->pool[i].page = NULL;
937                 }
938         }
939
940         dma_free_coherent(&priv->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
941                           rxq->bd_dma);
942         dma_free_coherent(&priv->pci_dev->dev, sizeof(struct iwl_rb_status),
943                           rxq->rb_stts, rxq->rb_stts_dma);
944         rxq->bd = NULL;
945         rxq->rb_stts  = NULL;
946 }
947
948 int iwlagn_rxq_stop(struct iwl_priv *priv)
949 {
950
951         /* stop Rx DMA */
952         iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
953         iwl_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
954                             FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
955
956         return 0;
957 }
958
959 int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
960 {
961         int idx = 0;
962         int band_offset = 0;
963
964         /* HT rate format: mac80211 wants an MCS number, which is just LSB */
965         if (rate_n_flags & RATE_MCS_HT_MSK) {
966                 idx = (rate_n_flags & 0xff);
967                 return idx;
968         /* Legacy rate format, search for match in table */
969         } else {
970                 if (band == IEEE80211_BAND_5GHZ)
971                         band_offset = IWL_FIRST_OFDM_RATE;
972                 for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++)
973                         if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
974                                 return idx - band_offset;
975         }
976
977         return -1;
978 }
979
980 /* Calc max signal level (dBm) among 3 possible receivers */
981 static inline int iwlagn_calc_rssi(struct iwl_priv *priv,
982                                 struct iwl_rx_phy_res *rx_resp)
983 {
984         return priv->cfg->ops->utils->calc_rssi(priv, rx_resp);
985 }
986
987 static u32 iwlagn_translate_rx_status(struct iwl_priv *priv, u32 decrypt_in)
988 {
989         u32 decrypt_out = 0;
990
991         if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
992                                         RX_RES_STATUS_STATION_FOUND)
993                 decrypt_out |= (RX_RES_STATUS_STATION_FOUND |
994                                 RX_RES_STATUS_NO_STATION_INFO_MISMATCH);
995
996         decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);
997
998         /* packet was not encrypted */
999         if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
1000                                         RX_RES_STATUS_SEC_TYPE_NONE)
1001                 return decrypt_out;
1002
1003         /* packet was encrypted with unknown alg */
1004         if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
1005                                         RX_RES_STATUS_SEC_TYPE_ERR)
1006                 return decrypt_out;
1007
1008         /* decryption was not done in HW */
1009         if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
1010                                         RX_MPDU_RES_STATUS_DEC_DONE_MSK)
1011                 return decrypt_out;
1012
1013         switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {
1014
1015         case RX_RES_STATUS_SEC_TYPE_CCMP:
1016                 /* alg is CCM: check MIC only */
1017                 if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
1018                         /* Bad MIC */
1019                         decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
1020                 else
1021                         decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
1022
1023                 break;
1024
1025         case RX_RES_STATUS_SEC_TYPE_TKIP:
1026                 if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
1027                         /* Bad TTAK */
1028                         decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
1029                         break;
1030                 }
1031                 /* fall through if TTAK OK */
1032         default:
1033                 if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
1034                         decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
1035                 else
1036                         decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
1037                 break;
1038         }
1039
1040         IWL_DEBUG_RX(priv, "decrypt_in:0x%x  decrypt_out = 0x%x\n",
1041                                         decrypt_in, decrypt_out);
1042
1043         return decrypt_out;
1044 }
1045
1046 static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv,
1047                                         struct ieee80211_hdr *hdr,
1048                                         u16 len,
1049                                         u32 ampdu_status,
1050                                         struct iwl_rx_mem_buffer *rxb,
1051                                         struct ieee80211_rx_status *stats)
1052 {
1053         struct sk_buff *skb;
1054         __le16 fc = hdr->frame_control;
1055
1056         /* We only process data packets if the interface is open */
1057         if (unlikely(!priv->is_open)) {
1058                 IWL_DEBUG_DROP_LIMIT(priv,
1059                     "Dropping packet while interface is not open.\n");
1060                 return;
1061         }
1062
1063         /* In case of HW accelerated crypto and bad decryption, drop */
1064         if (!priv->cfg->mod_params->sw_crypto &&
1065             iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
1066                 return;
1067
1068         skb = dev_alloc_skb(128);
1069         if (!skb) {
1070                 IWL_ERR(priv, "dev_alloc_skb failed\n");
1071                 return;
1072         }
1073
1074         skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
1075
1076         iwl_update_stats(priv, false, fc, len);
1077         memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
1078
1079         ieee80211_rx(priv->hw, skb);
1080         priv->alloc_rxb_page--;
1081         rxb->page = NULL;
1082 }
1083
1084 /* Called for REPLY_RX (legacy ABG frames), or
1085  * REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
1086 void iwlagn_rx_reply_rx(struct iwl_priv *priv,
1087                                 struct iwl_rx_mem_buffer *rxb)
1088 {
1089         struct ieee80211_hdr *header;
1090         struct ieee80211_rx_status rx_status;
1091         struct iwl_rx_packet *pkt = rxb_addr(rxb);
1092         struct iwl_rx_phy_res *phy_res;
1093         __le32 rx_pkt_status;
1094         struct iwl_rx_mpdu_res_start *amsdu;
1095         u32 len;
1096         u32 ampdu_status;
1097         u32 rate_n_flags;
1098
1099         /**
1100          * REPLY_RX and REPLY_RX_MPDU_CMD are handled differently.
1101          *      REPLY_RX: physical layer info is in this buffer
1102          *      REPLY_RX_MPDU_CMD: physical layer info was sent in separate
1103          *              command and cached in priv->last_phy_res
1104          *
1105          * Here we set up local variables depending on which command is
1106          * received.
1107          */
1108         if (pkt->hdr.cmd == REPLY_RX) {
1109                 phy_res = (struct iwl_rx_phy_res *)pkt->u.raw;
1110                 header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res)
1111                                 + phy_res->cfg_phy_cnt);
1112
1113                 len = le16_to_cpu(phy_res->byte_count);
1114                 rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*phy_res) +
1115                                 phy_res->cfg_phy_cnt + len);
1116                 ampdu_status = le32_to_cpu(rx_pkt_status);
1117         } else {
1118                 if (!priv->_agn.last_phy_res_valid) {
1119                         IWL_ERR(priv, "MPDU frame without cached PHY data\n");
1120                         return;
1121                 }
1122                 phy_res = &priv->_agn.last_phy_res;
1123                 amsdu = (struct iwl_rx_mpdu_res_start *)pkt->u.raw;
1124                 header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
1125                 len = le16_to_cpu(amsdu->byte_count);
1126                 rx_pkt_status = *(__le32 *)(pkt->u.raw + sizeof(*amsdu) + len);
1127                 ampdu_status = iwlagn_translate_rx_status(priv,
1128                                 le32_to_cpu(rx_pkt_status));
1129         }
1130
1131         if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
1132                 IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
1133                                 phy_res->cfg_phy_cnt);
1134                 return;
1135         }
1136
1137         if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
1138             !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
1139                 IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n",
1140                                 le32_to_cpu(rx_pkt_status));
1141                 return;
1142         }
1143
1144         /* This will be used in several places later */
1145         rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);
1146
1147         /* rx_status carries information about the packet to mac80211 */
1148         rx_status.mactime = le64_to_cpu(phy_res->timestamp);
1149         rx_status.freq =
1150                 ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel));
1151         rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
1152                                 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
1153         rx_status.rate_idx =
1154                 iwlagn_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
1155         rx_status.flag = 0;
1156
1157         /* TSF isn't reliable. In order to allow smooth user experience,
1158          * this W/A doesn't propagate it to the mac80211 */
1159         /*rx_status.flag |= RX_FLAG_TSFT;*/
1160
1161         priv->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);
1162
1163         /* Find max signal strength (dBm) among 3 antenna/receiver chains */
1164         rx_status.signal = iwlagn_calc_rssi(priv, phy_res);
1165
1166         iwl_dbg_log_rx_data_frame(priv, len, header);
1167         IWL_DEBUG_STATS_LIMIT(priv, "Rssi %d, TSF %llu\n",
1168                 rx_status.signal, (unsigned long long)rx_status.mactime);
1169
1170         /*
1171          * "antenna number"
1172          *
1173          * It seems that the antenna field in the phy flags value
1174          * is actually a bit field. This is undefined by radiotap,
1175          * it wants an actual antenna number but I always get "7"
1176          * for most legacy frames I receive indicating that the
1177          * same frame was received on all three RX chains.
1178          *
1179          * I think this field should be removed in favor of a
1180          * new 802.11n radiotap field "RX chains" that is defined
1181          * as a bitmask.
1182          */
1183         rx_status.antenna =
1184                 (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
1185                 >> RX_RES_PHY_FLAGS_ANTENNA_POS;
1186
1187         /* set the preamble flag if appropriate */
1188         if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
1189                 rx_status.flag |= RX_FLAG_SHORTPRE;
1190
1191         /* Set up the HT phy flags */
1192         if (rate_n_flags & RATE_MCS_HT_MSK)
1193                 rx_status.flag |= RX_FLAG_HT;
1194         if (rate_n_flags & RATE_MCS_HT40_MSK)
1195                 rx_status.flag |= RX_FLAG_40MHZ;
1196         if (rate_n_flags & RATE_MCS_SGI_MSK)
1197                 rx_status.flag |= RX_FLAG_SHORT_GI;
1198
1199         iwlagn_pass_packet_to_mac80211(priv, header, len, ampdu_status,
1200                                     rxb, &rx_status);
1201 }
1202
1203 /* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
1204  * This will be used later in iwl_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
1205 void iwlagn_rx_reply_rx_phy(struct iwl_priv *priv,
1206                             struct iwl_rx_mem_buffer *rxb)
1207 {
1208         struct iwl_rx_packet *pkt = rxb_addr(rxb);
1209         priv->_agn.last_phy_res_valid = true;
1210         memcpy(&priv->_agn.last_phy_res, pkt->u.raw,
1211                sizeof(struct iwl_rx_phy_res));
1212 }
1213
1214 static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
1215                                            struct ieee80211_vif *vif,
1216                                            enum ieee80211_band band,
1217                                            struct iwl_scan_channel *scan_ch)
1218 {
1219         const struct ieee80211_supported_band *sband;
1220         u16 passive_dwell = 0;
1221         u16 active_dwell = 0;
1222         int added = 0;
1223         u16 channel = 0;
1224
1225         sband = iwl_get_hw_mode(priv, band);
1226         if (!sband) {
1227                 IWL_ERR(priv, "invalid band\n");
1228                 return added;
1229         }
1230
1231         active_dwell = iwl_get_active_dwell_time(priv, band, 0);
1232         passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
1233
1234         if (passive_dwell <= active_dwell)
1235                 passive_dwell = active_dwell + 1;
1236
1237         channel = iwl_get_single_channel_number(priv, band);
1238         if (channel) {
1239                 scan_ch->channel = cpu_to_le16(channel);
1240                 scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
1241                 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1242                 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1243                 /* Set txpower levels to defaults */
1244                 scan_ch->dsp_atten = 110;
1245                 if (band == IEEE80211_BAND_5GHZ)
1246                         scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
1247                 else
1248                         scan_ch->tx_gain = ((1 << 5) | (5 << 3));
1249                 added++;
1250         } else
1251                 IWL_ERR(priv, "no valid channel found\n");
1252         return added;
1253 }
1254
1255 static int iwl_get_channels_for_scan(struct iwl_priv *priv,
1256                                      struct ieee80211_vif *vif,
1257                                      enum ieee80211_band band,
1258                                      u8 is_active, u8 n_probes,
1259                                      struct iwl_scan_channel *scan_ch)
1260 {
1261         struct ieee80211_channel *chan;
1262         const struct ieee80211_supported_band *sband;
1263         const struct iwl_channel_info *ch_info;
1264         u16 passive_dwell = 0;
1265         u16 active_dwell = 0;
1266         int added, i;
1267         u16 channel;
1268
1269         sband = iwl_get_hw_mode(priv, band);
1270         if (!sband)
1271                 return 0;
1272
1273         active_dwell = iwl_get_active_dwell_time(priv, band, n_probes);
1274         passive_dwell = iwl_get_passive_dwell_time(priv, band, vif);
1275
1276         if (passive_dwell <= active_dwell)
1277                 passive_dwell = active_dwell + 1;
1278
1279         for (i = 0, added = 0; i < priv->scan_request->n_channels; i++) {
1280                 chan = priv->scan_request->channels[i];
1281
1282                 if (chan->band != band)
1283                         continue;
1284
1285                 channel = chan->hw_value;
1286                 scan_ch->channel = cpu_to_le16(channel);
1287
1288                 ch_info = iwl_get_channel_info(priv, band, channel);
1289                 if (!is_channel_valid(ch_info)) {
1290                         IWL_DEBUG_SCAN(priv, "Channel %d is INVALID for this band.\n",
1291                                         channel);
1292                         continue;
1293                 }
1294
1295                 if (!is_active || is_channel_passive(ch_info) ||
1296                     (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN))
1297                         scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
1298                 else
1299                         scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
1300
1301                 if (n_probes)
1302                         scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
1303
1304                 scan_ch->active_dwell = cpu_to_le16(active_dwell);
1305                 scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
1306
1307                 /* Set txpower levels to defaults */
1308                 scan_ch->dsp_atten = 110;
1309
1310                 /* NOTE: if we were doing 6Mb OFDM for scans we'd use
1311                  * power level:
1312                  * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
1313                  */
1314                 if (band == IEEE80211_BAND_5GHZ)
1315                         scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
1316                 else
1317                         scan_ch->tx_gain = ((1 << 5) | (5 << 3));
1318
1319                 IWL_DEBUG_SCAN(priv, "Scanning ch=%d prob=0x%X [%s %d]\n",
1320                                channel, le32_to_cpu(scan_ch->type),
1321                                (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
1322                                 "ACTIVE" : "PASSIVE",
1323                                (scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) ?
1324                                active_dwell : passive_dwell);
1325
1326                 scan_ch++;
1327                 added++;
1328         }
1329
1330         IWL_DEBUG_SCAN(priv, "total channels to scan %d\n", added);
1331         return added;
1332 }
1333
1334 int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
1335 {
1336         struct iwl_host_cmd cmd = {
1337                 .id = REPLY_SCAN_CMD,
1338                 .len = sizeof(struct iwl_scan_cmd),
1339                 .flags = CMD_SIZE_HUGE,
1340         };
1341         struct iwl_scan_cmd *scan;
1342         struct iwl_rxon_context *ctx = &priv->contexts[IWL_RXON_CTX_BSS];
1343         u32 rate_flags = 0;
1344         u16 cmd_len;
1345         u16 rx_chain = 0;
1346         enum ieee80211_band band;
1347         u8 n_probes = 0;
1348         u8 rx_ant = priv->hw_params.valid_rx_ant;
1349         u8 rate;
1350         bool is_active = false;
1351         int  chan_mod;
1352         u8 active_chains;
1353         u8 scan_tx_antennas = priv->hw_params.valid_tx_ant;
1354         int ret;
1355
1356         lockdep_assert_held(&priv->mutex);
1357
1358         if (vif)
1359                 ctx = iwl_rxon_ctx_from_vif(vif);
1360
1361         if (!priv->scan_cmd) {
1362                 priv->scan_cmd = kmalloc(sizeof(struct iwl_scan_cmd) +
1363                                          IWL_MAX_SCAN_SIZE, GFP_KERNEL);
1364                 if (!priv->scan_cmd) {
1365                         IWL_DEBUG_SCAN(priv,
1366                                        "fail to allocate memory for scan\n");
1367                         return -ENOMEM;
1368                 }
1369         }
1370         scan = priv->scan_cmd;
1371         memset(scan, 0, sizeof(struct iwl_scan_cmd) + IWL_MAX_SCAN_SIZE);
1372
1373         scan->quiet_plcp_th = IWL_PLCP_QUIET_THRESH;
1374         scan->quiet_time = IWL_ACTIVE_QUIET_TIME;
1375
1376         if (iwl_is_any_associated(priv)) {
1377                 u16 interval = 0;
1378                 u32 extra;
1379                 u32 suspend_time = 100;
1380                 u32 scan_suspend_time = 100;
1381                 unsigned long flags;
1382
1383                 IWL_DEBUG_INFO(priv, "Scanning while associated...\n");
1384                 spin_lock_irqsave(&priv->lock, flags);
1385                 if (priv->is_internal_short_scan)
1386                         interval = 0;
1387                 else
1388                         interval = vif->bss_conf.beacon_int;
1389                 spin_unlock_irqrestore(&priv->lock, flags);
1390
1391                 scan->suspend_time = 0;
1392                 scan->max_out_time = cpu_to_le32(200 * 1024);
1393                 if (!interval)
1394                         interval = suspend_time;
1395
1396                 extra = (suspend_time / interval) << 22;
1397                 scan_suspend_time = (extra |
1398                     ((suspend_time % interval) * 1024));
1399                 scan->suspend_time = cpu_to_le32(scan_suspend_time);
1400                 IWL_DEBUG_SCAN(priv, "suspend_time 0x%X beacon interval %d\n",
1401                                scan_suspend_time, interval);
1402         }
1403
1404         if (priv->is_internal_short_scan) {
1405                 IWL_DEBUG_SCAN(priv, "Start internal passive scan.\n");
1406         } else if (priv->scan_request->n_ssids) {
1407                 int i, p = 0;
1408                 IWL_DEBUG_SCAN(priv, "Kicking off active scan\n");
1409                 for (i = 0; i < priv->scan_request->n_ssids; i++) {
1410                         /* always does wildcard anyway */
1411                         if (!priv->scan_request->ssids[i].ssid_len)
1412                                 continue;
1413                         scan->direct_scan[p].id = WLAN_EID_SSID;
1414                         scan->direct_scan[p].len =
1415                                 priv->scan_request->ssids[i].ssid_len;
1416                         memcpy(scan->direct_scan[p].ssid,
1417                                priv->scan_request->ssids[i].ssid,
1418                                priv->scan_request->ssids[i].ssid_len);
1419                         n_probes++;
1420                         p++;
1421                 }
1422                 is_active = true;
1423         } else
1424                 IWL_DEBUG_SCAN(priv, "Start passive scan.\n");
1425
1426         scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
1427         scan->tx_cmd.sta_id = ctx->bcast_sta_id;
1428         scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
1429
1430         switch (priv->scan_band) {
1431         case IEEE80211_BAND_2GHZ:
1432                 scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
1433                 chan_mod = le32_to_cpu(
1434                         priv->contexts[IWL_RXON_CTX_BSS].active.flags &
1435                                                 RXON_FLG_CHANNEL_MODE_MSK)
1436                                        >> RXON_FLG_CHANNEL_MODE_POS;
1437                 if (chan_mod == CHANNEL_MODE_PURE_40) {
1438                         rate = IWL_RATE_6M_PLCP;
1439                 } else {
1440                         rate = IWL_RATE_1M_PLCP;
1441                         rate_flags = RATE_MCS_CCK_MSK;
1442                 }
1443                 /*
1444                  * Internal scans are passive, so we can indiscriminately set
1445                  * the BT ignore flag on 2.4 GHz since it applies to TX only.
1446                  */
1447                 if (priv->cfg->bt_params &&
1448                     priv->cfg->bt_params->advanced_bt_coexist)
1449                         scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT;
1450                 break;
1451         case IEEE80211_BAND_5GHZ:
1452                 rate = IWL_RATE_6M_PLCP;
1453                 break;
1454         default:
1455                 IWL_WARN(priv, "Invalid scan band\n");
1456                 return -EIO;
1457         }
1458
1459         /*
1460          * If active scanning is requested but a certain channel is
1461          * marked passive, we can do active scanning if we detect
1462          * transmissions.
1463          *
1464          * There is an issue with some firmware versions that triggers
1465          * a sysassert on a "good CRC threshold" of zero (== disabled),
1466          * on a radar channel even though this means that we should NOT
1467          * send probes.
1468          *
1469          * The "good CRC threshold" is the number of frames that we
1470          * need to receive during our dwell time on a channel before
1471          * sending out probes -- setting this to a huge value will
1472          * mean we never reach it, but at the same time work around
1473          * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER
1474          * here instead of IWL_GOOD_CRC_TH_DISABLED.
1475          */
1476         scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT :
1477                                         IWL_GOOD_CRC_TH_NEVER;
1478
1479         band = priv->scan_band;
1480
1481         if (priv->cfg->scan_rx_antennas[band])
1482                 rx_ant = priv->cfg->scan_rx_antennas[band];
1483
1484         if (priv->cfg->scan_tx_antennas[band])
1485                 scan_tx_antennas = priv->cfg->scan_tx_antennas[band];
1486
1487         if (priv->cfg->bt_params &&
1488             priv->cfg->bt_params->advanced_bt_coexist &&
1489             priv->bt_full_concurrent) {
1490                 /* operated as 1x1 in full concurrency mode */
1491                 scan_tx_antennas = first_antenna(
1492                         priv->cfg->scan_tx_antennas[band]);
1493         }
1494
1495         priv->scan_tx_ant[band] = iwl_toggle_tx_ant(priv, priv->scan_tx_ant[band],
1496                                                     scan_tx_antennas);
1497         rate_flags |= iwl_ant_idx_to_flags(priv->scan_tx_ant[band]);
1498         scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(rate, rate_flags);
1499
1500         /* In power save mode use one chain, otherwise use all chains */
1501         if (test_bit(STATUS_POWER_PMI, &priv->status)) {
1502                 /* rx_ant has been set to all valid chains previously */
1503                 active_chains = rx_ant &
1504                                 ((u8)(priv->chain_noise_data.active_chains));
1505                 if (!active_chains)
1506                         active_chains = rx_ant;
1507
1508                 IWL_DEBUG_SCAN(priv, "chain_noise_data.active_chains: %u\n",
1509                                 priv->chain_noise_data.active_chains);
1510
1511                 rx_ant = first_antenna(active_chains);
1512         }
1513         if (priv->cfg->bt_params &&
1514             priv->cfg->bt_params->advanced_bt_coexist &&
1515             priv->bt_full_concurrent) {
1516                 /* operated as 1x1 in full concurrency mode */
1517                 rx_ant = first_antenna(rx_ant);
1518         }
1519
1520         /* MIMO is not used here, but value is required */
1521         rx_chain |= priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
1522         rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
1523         rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
1524         rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
1525         scan->rx_chain = cpu_to_le16(rx_chain);
1526         if (!priv->is_internal_short_scan) {
1527                 cmd_len = iwl_fill_probe_req(priv,
1528                                         (struct ieee80211_mgmt *)scan->data,
1529                                         vif->addr,
1530                                         priv->scan_request->ie,
1531                                         priv->scan_request->ie_len,
1532                                         IWL_MAX_SCAN_SIZE - sizeof(*scan));
1533         } else {
1534                 /* use bcast addr, will not be transmitted but must be valid */
1535                 cmd_len = iwl_fill_probe_req(priv,
1536                                         (struct ieee80211_mgmt *)scan->data,
1537                                         iwl_bcast_addr, NULL, 0,
1538                                         IWL_MAX_SCAN_SIZE - sizeof(*scan));
1539
1540         }
1541         scan->tx_cmd.len = cpu_to_le16(cmd_len);
1542
1543         scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK |
1544                                RXON_FILTER_BCON_AWARE_MSK);
1545
1546         if (priv->is_internal_short_scan) {
1547                 scan->channel_count =
1548                         iwl_get_single_channel_for_scan(priv, vif, band,
1549                                 (void *)&scan->data[le16_to_cpu(
1550                                 scan->tx_cmd.len)]);
1551         } else {
1552                 scan->channel_count =
1553                         iwl_get_channels_for_scan(priv, vif, band,
1554                                 is_active, n_probes,
1555                                 (void *)&scan->data[le16_to_cpu(
1556                                 scan->tx_cmd.len)]);
1557         }
1558         if (scan->channel_count == 0) {
1559                 IWL_DEBUG_SCAN(priv, "channel count %d\n", scan->channel_count);
1560                 return -EIO;
1561         }
1562
1563         cmd.len += le16_to_cpu(scan->tx_cmd.len) +
1564             scan->channel_count * sizeof(struct iwl_scan_channel);
1565         cmd.data = scan;
1566         scan->len = cpu_to_le16(cmd.len);
1567
1568         /* set scan bit here for PAN params */
1569         set_bit(STATUS_SCAN_HW, &priv->status);
1570
1571         if (priv->cfg->ops->hcmd->set_pan_params) {
1572                 ret = priv->cfg->ops->hcmd->set_pan_params(priv);
1573                 if (ret)
1574                         return ret;
1575         }
1576
1577         ret = iwl_send_cmd_sync(priv, &cmd);
1578         if (ret) {
1579                 clear_bit(STATUS_SCAN_HW, &priv->status);
1580                 if (priv->cfg->ops->hcmd->set_pan_params)
1581                         priv->cfg->ops->hcmd->set_pan_params(priv);
1582         }
1583
1584         return ret;
1585 }
1586
1587 void iwlagn_post_scan(struct iwl_priv *priv)
1588 {
1589         struct iwl_rxon_context *ctx;
1590
1591         /*
1592          * Since setting the RXON may have been deferred while
1593          * performing the scan, fire one off if needed
1594          */
1595         for_each_context(priv, ctx)
1596                 if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
1597                         iwlagn_commit_rxon(priv, ctx);
1598
1599         if (priv->cfg->ops->hcmd->set_pan_params)
1600                 priv->cfg->ops->hcmd->set_pan_params(priv);
1601 }
1602
1603 int iwlagn_manage_ibss_station(struct iwl_priv *priv,
1604                                struct ieee80211_vif *vif, bool add)
1605 {
1606         struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
1607
1608         if (add)
1609                 return iwlagn_add_bssid_station(priv, vif_priv->ctx,
1610                                                 vif->bss_conf.bssid,
1611                                                 &vif_priv->ibss_bssid_sta_id);
1612         return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
1613                                   vif->bss_conf.bssid);
1614 }
1615
1616 void iwl_free_tfds_in_queue(struct iwl_priv *priv,
1617                             int sta_id, int tid, int freed)
1618 {
1619         lockdep_assert_held(&priv->sta_lock);
1620
1621         if (priv->stations[sta_id].tid[tid].tfds_in_queue >= freed)
1622                 priv->stations[sta_id].tid[tid].tfds_in_queue -= freed;
1623         else {
1624                 IWL_DEBUG_TX(priv, "free more than tfds_in_queue (%u:%d)\n",
1625                         priv->stations[sta_id].tid[tid].tfds_in_queue,
1626                         freed);
1627                 priv->stations[sta_id].tid[tid].tfds_in_queue = 0;
1628         }
1629 }
1630
1631 #define IWL_FLUSH_WAIT_MS       2000
1632
1633 int iwlagn_wait_tx_queue_empty(struct iwl_priv *priv)
1634 {
1635         struct iwl_tx_queue *txq;
1636         struct iwl_queue *q;
1637         int cnt;
1638         unsigned long now = jiffies;
1639         int ret = 0;
1640
1641         /* waiting for all the tx frames complete might take a while */
1642         for (cnt = 0; cnt < priv->hw_params.max_txq_num; cnt++) {
1643                 if (cnt == priv->cmd_queue)
1644                         continue;
1645                 txq = &priv->txq[cnt];
1646                 q = &txq->q;
1647                 while (q->read_ptr != q->write_ptr && !time_after(jiffies,
1648                        now + msecs_to_jiffies(IWL_FLUSH_WAIT_MS)))
1649                                 msleep(1);
1650
1651                 if (q->read_ptr != q->write_ptr) {
1652                         IWL_ERR(priv, "fail to flush all tx fifo queues\n");
1653                         ret = -ETIMEDOUT;
1654                         break;
1655                 }
1656         }
1657         return ret;
1658 }
1659
1660 #define IWL_TX_QUEUE_MSK        0xfffff
1661
1662 /**
1663  * iwlagn_txfifo_flush: send REPLY_TXFIFO_FLUSH command to uCode
1664  *
1665  * pre-requirements:
1666  *  1. acquire mutex before calling
1667  *  2. make sure rf is on and not in exit state
1668  */
1669 int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
1670 {
1671         struct iwl_txfifo_flush_cmd flush_cmd;
1672         struct iwl_host_cmd cmd = {
1673                 .id = REPLY_TXFIFO_FLUSH,
1674                 .len = sizeof(struct iwl_txfifo_flush_cmd),
1675                 .flags = CMD_SYNC,
1676                 .data = &flush_cmd,
1677         };
1678
1679         might_sleep();
1680
1681         memset(&flush_cmd, 0, sizeof(flush_cmd));
1682         flush_cmd.fifo_control = IWL_TX_FIFO_VO_MSK | IWL_TX_FIFO_VI_MSK |
1683                                  IWL_TX_FIFO_BE_MSK | IWL_TX_FIFO_BK_MSK;
1684         if (priv->cfg->sku & IWL_SKU_N)
1685                 flush_cmd.fifo_control |= IWL_AGG_TX_QUEUE_MSK;
1686
1687         IWL_DEBUG_INFO(priv, "fifo queue control: 0X%x\n",
1688                        flush_cmd.fifo_control);
1689         flush_cmd.flush_control = cpu_to_le16(flush_control);
1690
1691         return iwl_send_cmd(priv, &cmd);
1692 }
1693
1694 void iwlagn_dev_txfifo_flush(struct iwl_priv *priv, u16 flush_control)
1695 {
1696         mutex_lock(&priv->mutex);
1697         ieee80211_stop_queues(priv->hw);
1698         if (priv->cfg->ops->lib->txfifo_flush(priv, IWL_DROP_ALL)) {
1699                 IWL_ERR(priv, "flush request fail\n");
1700                 goto done;
1701         }
1702         IWL_DEBUG_INFO(priv, "wait transmit/flush all frames\n");
1703         iwlagn_wait_tx_queue_empty(priv);
1704 done:
1705         ieee80211_wake_queues(priv->hw);
1706         mutex_unlock(&priv->mutex);
1707 }
1708
1709 /*
1710  * BT coex
1711  */
1712 /*
1713  * Macros to access the lookup table.
1714  *
1715  * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
1716 * wifi_prio, wifi_txrx and wifi_sh_ant_req.
1717  *
1718  * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
1719  *
1720  * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
1721  * one after another in 32-bit registers, and "registers" 0 through 7 contain
1722  * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
1723  *
1724  * These macros encode that format.
1725  */
1726 #define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
1727                   wifi_txrx, wifi_sh_ant_req) \
1728         (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
1729         (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
1730
1731 #define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
1732         lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
1733 #define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1734                                  wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1735         (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
1736                                    bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1737                                    wifi_sh_ant_req))))
1738 #define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1739                                 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1740         LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
1741                                bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1742                                wifi_sh_ant_req))
1743 #define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
1744                                   wifi_req, wifi_prio, wifi_txrx, \
1745                                   wifi_sh_ant_req) \
1746         LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
1747                                bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
1748                                wifi_sh_ant_req))
1749
1750 #define LUT_WLAN_KILL_OP(lut, op, val) \
1751         lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
1752 #define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1753                            wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1754         (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1755                              wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
1756 #define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1757                           wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1758         LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1759                          wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1760 #define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1761                             wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1762         LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1763                          wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1764
1765 #define LUT_ANT_SWITCH_OP(lut, op, val) \
1766         lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
1767 #define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1768                             wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1769         (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1770                               wifi_req, wifi_prio, wifi_txrx, \
1771                               wifi_sh_ant_req))))
1772 #define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1773                            wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1774         LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1775                           wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1776 #define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
1777                              wifi_prio, wifi_txrx, wifi_sh_ant_req) \
1778         LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
1779                           wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
1780
1781 static const __le32 iwlagn_def_3w_lookup[12] = {
1782         cpu_to_le32(0xaaaaaaaa),
1783         cpu_to_le32(0xaaaaaaaa),
1784         cpu_to_le32(0xaeaaaaaa),
1785         cpu_to_le32(0xaaaaaaaa),
1786         cpu_to_le32(0xcc00ff28),
1787         cpu_to_le32(0x0000aaaa),
1788         cpu_to_le32(0xcc00aaaa),
1789         cpu_to_le32(0x0000aaaa),
1790         cpu_to_le32(0xc0004000),
1791         cpu_to_le32(0x00004000),
1792         cpu_to_le32(0xf0005000),
1793         cpu_to_le32(0xf0004000),
1794 };
1795
1796 static const __le32 iwlagn_concurrent_lookup[12] = {
1797         cpu_to_le32(0xaaaaaaaa),
1798         cpu_to_le32(0xaaaaaaaa),
1799         cpu_to_le32(0xaaaaaaaa),
1800         cpu_to_le32(0xaaaaaaaa),
1801         cpu_to_le32(0xaaaaaaaa),
1802         cpu_to_le32(0xaaaaaaaa),
1803         cpu_to_le32(0xaaaaaaaa),
1804         cpu_to_le32(0xaaaaaaaa),
1805         cpu_to_le32(0x00000000),
1806         cpu_to_le32(0x00000000),
1807         cpu_to_le32(0x00000000),
1808         cpu_to_le32(0x00000000),
1809 };
1810
1811 void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
1812 {
1813         struct iwlagn_bt_cmd bt_cmd = {
1814                 .max_kill = IWLAGN_BT_MAX_KILL_DEFAULT,
1815                 .bt3_timer_t7_value = IWLAGN_BT3_T7_DEFAULT,
1816                 .bt3_prio_sample_time = IWLAGN_BT3_PRIO_SAMPLE_DEFAULT,
1817                 .bt3_timer_t2_value = IWLAGN_BT3_T2_DEFAULT,
1818         };
1819
1820         BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) !=
1821                         sizeof(bt_cmd.bt3_lookup_table));
1822
1823         if (priv->cfg->bt_params)
1824                 bt_cmd.prio_boost = priv->cfg->bt_params->bt_prio_boost;
1825         else
1826                 bt_cmd.prio_boost = 0;
1827         bt_cmd.kill_ack_mask = priv->kill_ack_mask;
1828         bt_cmd.kill_cts_mask = priv->kill_cts_mask;
1829         bt_cmd.valid = priv->bt_valid;
1830         bt_cmd.tx_prio_boost = 0;
1831         bt_cmd.rx_prio_boost = 0;
1832
1833         /*
1834          * Configure BT coex mode to "no coexistence" when the
1835          * user disabled BT coexistence, we have no interface
1836          * (might be in monitor mode), or the interface is in
1837          * IBSS mode (no proper uCode support for coex then).
1838          */
1839         if (!bt_coex_active || priv->iw_mode == NL80211_IFTYPE_ADHOC) {
1840                 bt_cmd.flags = 0;
1841         } else {
1842                 bt_cmd.flags = IWLAGN_BT_FLAG_COEX_MODE_3W <<
1843                                         IWLAGN_BT_FLAG_COEX_MODE_SHIFT;
1844                 if (priv->bt_ch_announce)
1845                         bt_cmd.flags |= IWLAGN_BT_FLAG_CHANNEL_INHIBITION;
1846                 IWL_DEBUG_INFO(priv, "BT coex flag: 0X%x\n", bt_cmd.flags);
1847         }
1848         if (priv->bt_full_concurrent)
1849                 memcpy(bt_cmd.bt3_lookup_table, iwlagn_concurrent_lookup,
1850                         sizeof(iwlagn_concurrent_lookup));
1851         else
1852                 memcpy(bt_cmd.bt3_lookup_table, iwlagn_def_3w_lookup,
1853                         sizeof(iwlagn_def_3w_lookup));
1854
1855         IWL_DEBUG_INFO(priv, "BT coex %s in %s mode\n",
1856                        bt_cmd.flags ? "active" : "disabled",
1857                        priv->bt_full_concurrent ?
1858                        "full concurrency" : "3-wire");
1859
1860         if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd))
1861                 IWL_ERR(priv, "failed to send BT Coex Config\n");
1862
1863         /*
1864          * When we are doing a restart, need to also reconfigure BT
1865          * SCO to the device. If not doing a restart, bt_sco_active
1866          * will always be false, so there's no need to have an extra
1867          * variable to check for it.
1868          */
1869         if (priv->bt_sco_active) {
1870                 struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
1871
1872                 if (priv->bt_sco_active)
1873                         sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
1874                 if (iwl_send_cmd_pdu(priv, REPLY_BT_COEX_SCO,
1875                                      sizeof(sco_cmd), &sco_cmd))
1876                         IWL_ERR(priv, "failed to send BT SCO command\n");
1877         }
1878 }
1879
1880 static void iwlagn_bt_traffic_change_work(struct work_struct *work)
1881 {
1882         struct iwl_priv *priv =
1883                 container_of(work, struct iwl_priv, bt_traffic_change_work);
1884         struct iwl_rxon_context *ctx;
1885         int smps_request = -1;
1886
1887         IWL_DEBUG_INFO(priv, "BT traffic load changes: %d\n",
1888                        priv->bt_traffic_load);
1889
1890         switch (priv->bt_traffic_load) {
1891         case IWL_BT_COEX_TRAFFIC_LOAD_NONE:
1892                 smps_request = IEEE80211_SMPS_AUTOMATIC;
1893                 break;
1894         case IWL_BT_COEX_TRAFFIC_LOAD_LOW:
1895                 smps_request = IEEE80211_SMPS_DYNAMIC;
1896                 break;
1897         case IWL_BT_COEX_TRAFFIC_LOAD_HIGH:
1898         case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS:
1899                 smps_request = IEEE80211_SMPS_STATIC;
1900                 break;
1901         default:
1902                 IWL_ERR(priv, "Invalid BT traffic load: %d\n",
1903                         priv->bt_traffic_load);
1904                 break;
1905         }
1906
1907         mutex_lock(&priv->mutex);
1908
1909         if (priv->cfg->ops->lib->update_chain_flags)
1910                 priv->cfg->ops->lib->update_chain_flags(priv);
1911
1912         if (smps_request != -1) {
1913                 for_each_context(priv, ctx) {
1914                         if (ctx->vif && ctx->vif->type == NL80211_IFTYPE_STATION)
1915                                 ieee80211_request_smps(ctx->vif, smps_request);
1916                 }
1917         }
1918
1919         mutex_unlock(&priv->mutex);
1920 }
1921
1922 static void iwlagn_print_uartmsg(struct iwl_priv *priv,
1923                                 struct iwl_bt_uart_msg *uart_msg)
1924 {
1925         IWL_DEBUG_NOTIF(priv, "Message Type = 0x%X, SSN = 0x%X, "
1926                         "Update Req = 0x%X",
1927                 (BT_UART_MSG_FRAME1MSGTYPE_MSK & uart_msg->frame1) >>
1928                         BT_UART_MSG_FRAME1MSGTYPE_POS,
1929                 (BT_UART_MSG_FRAME1SSN_MSK & uart_msg->frame1) >>
1930                         BT_UART_MSG_FRAME1SSN_POS,
1931                 (BT_UART_MSG_FRAME1UPDATEREQ_MSK & uart_msg->frame1) >>
1932                         BT_UART_MSG_FRAME1UPDATEREQ_POS);
1933
1934         IWL_DEBUG_NOTIF(priv, "Open connections = 0x%X, Traffic load = 0x%X, "
1935                         "Chl_SeqN = 0x%X, In band = 0x%X",
1936                 (BT_UART_MSG_FRAME2OPENCONNECTIONS_MSK & uart_msg->frame2) >>
1937                         BT_UART_MSG_FRAME2OPENCONNECTIONS_POS,
1938                 (BT_UART_MSG_FRAME2TRAFFICLOAD_MSK & uart_msg->frame2) >>
1939                         BT_UART_MSG_FRAME2TRAFFICLOAD_POS,
1940                 (BT_UART_MSG_FRAME2CHLSEQN_MSK & uart_msg->frame2) >>
1941                         BT_UART_MSG_FRAME2CHLSEQN_POS,
1942                 (BT_UART_MSG_FRAME2INBAND_MSK & uart_msg->frame2) >>
1943                         BT_UART_MSG_FRAME2INBAND_POS);
1944
1945         IWL_DEBUG_NOTIF(priv, "SCO/eSCO = 0x%X, Sniff = 0x%X, A2DP = 0x%X, "
1946                         "ACL = 0x%X, Master = 0x%X, OBEX = 0x%X",
1947                 (BT_UART_MSG_FRAME3SCOESCO_MSK & uart_msg->frame3) >>
1948                         BT_UART_MSG_FRAME3SCOESCO_POS,
1949                 (BT_UART_MSG_FRAME3SNIFF_MSK & uart_msg->frame3) >>
1950                         BT_UART_MSG_FRAME3SNIFF_POS,
1951                 (BT_UART_MSG_FRAME3A2DP_MSK & uart_msg->frame3) >>
1952                         BT_UART_MSG_FRAME3A2DP_POS,
1953                 (BT_UART_MSG_FRAME3ACL_MSK & uart_msg->frame3) >>
1954                         BT_UART_MSG_FRAME3ACL_POS,
1955                 (BT_UART_MSG_FRAME3MASTER_MSK & uart_msg->frame3) >>
1956                         BT_UART_MSG_FRAME3MASTER_POS,
1957                 (BT_UART_MSG_FRAME3OBEX_MSK & uart_msg->frame3) >>
1958                         BT_UART_MSG_FRAME3OBEX_POS);
1959
1960         IWL_DEBUG_NOTIF(priv, "Idle duration = 0x%X",
1961                 (BT_UART_MSG_FRAME4IDLEDURATION_MSK & uart_msg->frame4) >>
1962                         BT_UART_MSG_FRAME4IDLEDURATION_POS);
1963
1964         IWL_DEBUG_NOTIF(priv, "Tx Activity = 0x%X, Rx Activity = 0x%X, "
1965                         "eSCO Retransmissions = 0x%X",
1966                 (BT_UART_MSG_FRAME5TXACTIVITY_MSK & uart_msg->frame5) >>
1967                         BT_UART_MSG_FRAME5TXACTIVITY_POS,
1968                 (BT_UART_MSG_FRAME5RXACTIVITY_MSK & uart_msg->frame5) >>
1969                         BT_UART_MSG_FRAME5RXACTIVITY_POS,
1970                 (BT_UART_MSG_FRAME5ESCORETRANSMIT_MSK & uart_msg->frame5) >>
1971                         BT_UART_MSG_FRAME5ESCORETRANSMIT_POS);
1972
1973         IWL_DEBUG_NOTIF(priv, "Sniff Interval = 0x%X, Discoverable = 0x%X",
1974                 (BT_UART_MSG_FRAME6SNIFFINTERVAL_MSK & uart_msg->frame6) >>
1975                         BT_UART_MSG_FRAME6SNIFFINTERVAL_POS,
1976                 (BT_UART_MSG_FRAME6DISCOVERABLE_MSK & uart_msg->frame6) >>
1977                         BT_UART_MSG_FRAME6DISCOVERABLE_POS);
1978
1979         IWL_DEBUG_NOTIF(priv, "Sniff Activity = 0x%X, Inquiry/Page SR Mode = "
1980                         "0x%X, Connectable = 0x%X",
1981                 (BT_UART_MSG_FRAME7SNIFFACTIVITY_MSK & uart_msg->frame7) >>
1982                         BT_UART_MSG_FRAME7SNIFFACTIVITY_POS,
1983                 (BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_MSK & uart_msg->frame7) >>
1984                         BT_UART_MSG_FRAME7INQUIRYPAGESRMODE_POS,
1985                 (BT_UART_MSG_FRAME7CONNECTABLE_MSK & uart_msg->frame7) >>
1986                         BT_UART_MSG_FRAME7CONNECTABLE_POS);
1987 }
1988
1989 static void iwlagn_set_kill_ack_msk(struct iwl_priv *priv,
1990                                      struct iwl_bt_uart_msg *uart_msg)
1991 {
1992         u8 kill_ack_msk;
1993         __le32 bt_kill_ack_msg[2] = {
1994                         cpu_to_le32(0xFFFFFFF), cpu_to_le32(0xFFFFFC00) };
1995
1996         kill_ack_msk = (((BT_UART_MSG_FRAME3A2DP_MSK |
1997                         BT_UART_MSG_FRAME3SNIFF_MSK |
1998                         BT_UART_MSG_FRAME3SCOESCO_MSK) &
1999                         uart_msg->frame3) == 0) ? 1 : 0;
2000         if (priv->kill_ack_mask != bt_kill_ack_msg[kill_ack_msk]) {
2001                 priv->bt_valid |= IWLAGN_BT_VALID_KILL_ACK_MASK;
2002                 priv->kill_ack_mask = bt_kill_ack_msg[kill_ack_msk];
2003                 /* schedule to send runtime bt_config */
2004                 queue_work(priv->workqueue, &priv->bt_runtime_config);
2005         }
2006
2007 }
2008
2009 void iwlagn_bt_coex_profile_notif(struct iwl_priv *priv,
2010                                              struct iwl_rx_mem_buffer *rxb)
2011 {
2012         unsigned long flags;
2013         struct iwl_rx_packet *pkt = rxb_addr(rxb);
2014         struct iwl_bt_coex_profile_notif *coex = &pkt->u.bt_coex_profile_notif;
2015         struct iwlagn_bt_sco_cmd sco_cmd = { .flags = 0 };
2016         struct iwl_bt_uart_msg *uart_msg = &coex->last_bt_uart_msg;
2017         u8 last_traffic_load;
2018
2019         IWL_DEBUG_NOTIF(priv, "BT Coex notification:\n");
2020         IWL_DEBUG_NOTIF(priv, "    status: %d\n", coex->bt_status);
2021         IWL_DEBUG_NOTIF(priv, "    traffic load: %d\n", coex->bt_traffic_load);
2022         IWL_DEBUG_NOTIF(priv, "    CI compliance: %d\n",
2023                         coex->bt_ci_compliance);
2024         iwlagn_print_uartmsg(priv, uart_msg);
2025
2026         last_traffic_load = priv->notif_bt_traffic_load;
2027         priv->notif_bt_traffic_load = coex->bt_traffic_load;
2028         if (priv->iw_mode != NL80211_IFTYPE_ADHOC) {
2029                 if (priv->bt_status != coex->bt_status ||
2030                     last_traffic_load != coex->bt_traffic_load) {
2031                         if (coex->bt_status) {
2032                                 /* BT on */
2033                                 if (!priv->bt_ch_announce)
2034                                         priv->bt_traffic_load =
2035                                                 IWL_BT_COEX_TRAFFIC_LOAD_HIGH;
2036                                 else
2037                                         priv->bt_traffic_load =
2038                                                 coex->bt_traffic_load;
2039                         } else {
2040                                 /* BT off */
2041                                 priv->bt_traffic_load =
2042                                         IWL_BT_COEX_TRAFFIC_LOAD_NONE;
2043                         }
2044                         priv->bt_status = coex->bt_status;
2045                         queue_work(priv->workqueue,
2046                                    &priv->bt_traffic_change_work);
2047                 }
2048                 if (priv->bt_sco_active !=
2049                     (uart_msg->frame3 & BT_UART_MSG_FRAME3SCOESCO_MSK)) {
2050                         priv->bt_sco_active = uart_msg->frame3 &
2051                                 BT_UART_MSG_FRAME3SCOESCO_MSK;
2052                         if (priv->bt_sco_active)
2053                                 sco_cmd.flags |= IWLAGN_BT_SCO_ACTIVE;
2054                         iwl_send_cmd_pdu_async(priv, REPLY_BT_COEX_SCO,
2055                                        sizeof(sco_cmd), &sco_cmd, NULL);
2056                 }
2057         }
2058
2059         iwlagn_set_kill_ack_msk(priv, uart_msg);
2060
2061         /* FIXME: based on notification, adjust the prio_boost */
2062
2063         spin_lock_irqsave(&priv->lock, flags);
2064         priv->bt_ci_compliance = coex->bt_ci_compliance;
2065         spin_unlock_irqrestore(&priv->lock, flags);
2066 }
2067
2068 void iwlagn_bt_rx_handler_setup(struct iwl_priv *priv)
2069 {
2070         iwlagn_rx_handler_setup(priv);
2071         priv->rx_handlers[REPLY_BT_COEX_PROFILE_NOTIF] =
2072                 iwlagn_bt_coex_profile_notif;
2073 }
2074
2075 void iwlagn_bt_setup_deferred_work(struct iwl_priv *priv)
2076 {
2077         iwlagn_setup_deferred_work(priv);
2078
2079         INIT_WORK(&priv->bt_traffic_change_work,
2080                   iwlagn_bt_traffic_change_work);
2081 }
2082
2083 void iwlagn_bt_cancel_deferred_work(struct iwl_priv *priv)
2084 {
2085         cancel_work_sync(&priv->bt_traffic_change_work);
2086 }
2087
2088 static bool is_single_rx_stream(struct iwl_priv *priv)
2089 {
2090         return priv->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
2091                priv->current_ht_config.single_chain_sufficient;
2092 }
2093
2094 #define IWL_NUM_RX_CHAINS_MULTIPLE      3
2095 #define IWL_NUM_RX_CHAINS_SINGLE        2
2096 #define IWL_NUM_IDLE_CHAINS_DUAL        2
2097 #define IWL_NUM_IDLE_CHAINS_SINGLE      1
2098
2099 /*
2100  * Determine how many receiver/antenna chains to use.
2101  *
2102  * More provides better reception via diversity.  Fewer saves power
2103  * at the expense of throughput, but only when not in powersave to
2104  * start with.
2105  *
2106  * MIMO (dual stream) requires at least 2, but works better with 3.
2107  * This does not determine *which* chains to use, just how many.
2108  */
2109 static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
2110 {
2111         if (priv->cfg->bt_params &&
2112             priv->cfg->bt_params->advanced_bt_coexist &&
2113             (priv->bt_full_concurrent ||
2114              priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
2115                 /*
2116                  * only use chain 'A' in bt high traffic load or
2117                  * full concurrency mode
2118                  */
2119                 return IWL_NUM_RX_CHAINS_SINGLE;
2120         }
2121         /* # of Rx chains to use when expecting MIMO. */
2122         if (is_single_rx_stream(priv))
2123                 return IWL_NUM_RX_CHAINS_SINGLE;
2124         else
2125                 return IWL_NUM_RX_CHAINS_MULTIPLE;
2126 }
2127
2128 /*
2129  * When we are in power saving mode, unless device support spatial
2130  * multiplexing power save, use the active count for rx chain count.
2131  */
2132 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
2133 {
2134         /* # Rx chains when idling, depending on SMPS mode */
2135         switch (priv->current_ht_config.smps) {
2136         case IEEE80211_SMPS_STATIC:
2137         case IEEE80211_SMPS_DYNAMIC:
2138                 return IWL_NUM_IDLE_CHAINS_SINGLE;
2139         case IEEE80211_SMPS_OFF:
2140                 return active_cnt;
2141         default:
2142                 WARN(1, "invalid SMPS mode %d",
2143                      priv->current_ht_config.smps);
2144                 return active_cnt;
2145         }
2146 }
2147
2148 /* up to 4 chains */
2149 static u8 iwl_count_chain_bitmap(u32 chain_bitmap)
2150 {
2151         u8 res;
2152         res = (chain_bitmap & BIT(0)) >> 0;
2153         res += (chain_bitmap & BIT(1)) >> 1;
2154         res += (chain_bitmap & BIT(2)) >> 2;
2155         res += (chain_bitmap & BIT(3)) >> 3;
2156         return res;
2157 }
2158
2159 /**
2160  * iwlagn_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
2161  *
2162  * Selects how many and which Rx receivers/antennas/chains to use.
2163  * This should not be used for scan command ... it puts data in wrong place.
2164  */
2165 void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx)
2166 {
2167         bool is_single = is_single_rx_stream(priv);
2168         bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
2169         u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
2170         u32 active_chains;
2171         u16 rx_chain;
2172
2173         /* Tell uCode which antennas are actually connected.
2174          * Before first association, we assume all antennas are connected.
2175          * Just after first association, iwl_chain_noise_calibration()
2176          *    checks which antennas actually *are* connected. */
2177         if (priv->chain_noise_data.active_chains)
2178                 active_chains = priv->chain_noise_data.active_chains;
2179         else
2180                 active_chains = priv->hw_params.valid_rx_ant;
2181
2182         if (priv->cfg->bt_params &&
2183             priv->cfg->bt_params->advanced_bt_coexist &&
2184             (priv->bt_full_concurrent ||
2185              priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) {
2186                 /*
2187                  * only use chain 'A' in bt high traffic load or
2188                  * full concurrency mode
2189                  */
2190                 active_chains = first_antenna(active_chains);
2191         }
2192
2193         rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;
2194
2195         /* How many receivers should we use? */
2196         active_rx_cnt = iwl_get_active_rx_chain_count(priv);
2197         idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
2198
2199
2200         /* correct rx chain count according hw settings
2201          * and chain noise calibration
2202          */
2203         valid_rx_cnt = iwl_count_chain_bitmap(active_chains);
2204         if (valid_rx_cnt < active_rx_cnt)
2205                 active_rx_cnt = valid_rx_cnt;
2206
2207         if (valid_rx_cnt < idle_rx_cnt)
2208                 idle_rx_cnt = valid_rx_cnt;
2209
2210         rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
2211         rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;
2212
2213         ctx->staging.rx_chain = cpu_to_le16(rx_chain);
2214
2215         if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam)
2216                 ctx->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
2217         else
2218                 ctx->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
2219
2220         IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n",
2221                         ctx->staging.rx_chain,
2222                         active_rx_cnt, idle_rx_cnt);
2223
2224         WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
2225                 active_rx_cnt < idle_rx_cnt);
2226 }
2227
2228 u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant, u8 valid)
2229 {
2230         int i;
2231         u8 ind = ant;
2232
2233         if (priv->band == IEEE80211_BAND_2GHZ &&
2234             priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)
2235                 return 0;
2236
2237         for (i = 0; i < RATE_ANT_NUM - 1; i++) {
2238                 ind = (ind + 1) < RATE_ANT_NUM ?  ind + 1 : 0;
2239                 if (valid & BIT(ind))
2240                         return ind;
2241         }
2242         return ant;
2243 }
2244
2245 static const char *get_csr_string(int cmd)
2246 {
2247         switch (cmd) {
2248         IWL_CMD(CSR_HW_IF_CONFIG_REG);
2249         IWL_CMD(CSR_INT_COALESCING);
2250         IWL_CMD(CSR_INT);
2251         IWL_CMD(CSR_INT_MASK);
2252         IWL_CMD(CSR_FH_INT_STATUS);
2253         IWL_CMD(CSR_GPIO_IN);
2254         IWL_CMD(CSR_RESET);
2255         IWL_CMD(CSR_GP_CNTRL);
2256         IWL_CMD(CSR_HW_REV);
2257         IWL_CMD(CSR_EEPROM_REG);
2258         IWL_CMD(CSR_EEPROM_GP);
2259         IWL_CMD(CSR_OTP_GP_REG);
2260         IWL_CMD(CSR_GIO_REG);
2261         IWL_CMD(CSR_GP_UCODE_REG);
2262         IWL_CMD(CSR_GP_DRIVER_REG);
2263         IWL_CMD(CSR_UCODE_DRV_GP1);
2264         IWL_CMD(CSR_UCODE_DRV_GP2);
2265         IWL_CMD(CSR_LED_REG);
2266         IWL_CMD(CSR_DRAM_INT_TBL_REG);
2267         IWL_CMD(CSR_GIO_CHICKEN_BITS);
2268         IWL_CMD(CSR_ANA_PLL_CFG);
2269         IWL_CMD(CSR_HW_REV_WA_REG);
2270         IWL_CMD(CSR_DBG_HPET_MEM_REG);
2271         default:
2272                 return "UNKNOWN";
2273         }
2274 }
2275
2276 void iwl_dump_csr(struct iwl_priv *priv)
2277 {
2278         int i;
2279         u32 csr_tbl[] = {
2280                 CSR_HW_IF_CONFIG_REG,
2281                 CSR_INT_COALESCING,
2282                 CSR_INT,
2283                 CSR_INT_MASK,
2284                 CSR_FH_INT_STATUS,
2285                 CSR_GPIO_IN,
2286                 CSR_RESET,
2287                 CSR_GP_CNTRL,
2288                 CSR_HW_REV,
2289                 CSR_EEPROM_REG,
2290                 CSR_EEPROM_GP,
2291                 CSR_OTP_GP_REG,
2292                 CSR_GIO_REG,
2293                 CSR_GP_UCODE_REG,
2294                 CSR_GP_DRIVER_REG,
2295                 CSR_UCODE_DRV_GP1,
2296                 CSR_UCODE_DRV_GP2,
2297                 CSR_LED_REG,
2298                 CSR_DRAM_INT_TBL_REG,
2299                 CSR_GIO_CHICKEN_BITS,
2300                 CSR_ANA_PLL_CFG,
2301                 CSR_HW_REV_WA_REG,
2302                 CSR_DBG_HPET_MEM_REG
2303         };
2304         IWL_ERR(priv, "CSR values:\n");
2305         IWL_ERR(priv, "(2nd byte of CSR_INT_COALESCING is "
2306                 "CSR_INT_PERIODIC_REG)\n");
2307         for (i = 0; i <  ARRAY_SIZE(csr_tbl); i++) {
2308                 IWL_ERR(priv, "  %25s: 0X%08x\n",
2309                         get_csr_string(csr_tbl[i]),
2310                         iwl_read32(priv, csr_tbl[i]));
2311         }
2312 }
2313
2314 static const char *get_fh_string(int cmd)
2315 {
2316         switch (cmd) {
2317         IWL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG);
2318         IWL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG);
2319         IWL_CMD(FH_RSCSR_CHNL0_WPTR);
2320         IWL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG);
2321         IWL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG);
2322         IWL_CMD(FH_MEM_RSSR_RX_STATUS_REG);
2323         IWL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
2324         IWL_CMD(FH_TSSR_TX_STATUS_REG);
2325         IWL_CMD(FH_TSSR_TX_ERROR_REG);
2326         default:
2327                 return "UNKNOWN";
2328         }
2329 }
2330
2331 int iwl_dump_fh(struct iwl_priv *priv, char **buf, bool display)
2332 {
2333         int i;
2334 #ifdef CONFIG_IWLWIFI_DEBUG
2335         int pos = 0;
2336         size_t bufsz = 0;
2337 #endif
2338         u32 fh_tbl[] = {
2339                 FH_RSCSR_CHNL0_STTS_WPTR_REG,
2340                 FH_RSCSR_CHNL0_RBDCB_BASE_REG,
2341                 FH_RSCSR_CHNL0_WPTR,
2342                 FH_MEM_RCSR_CHNL0_CONFIG_REG,
2343                 FH_MEM_RSSR_SHARED_CTRL_REG,
2344                 FH_MEM_RSSR_RX_STATUS_REG,
2345                 FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
2346                 FH_TSSR_TX_STATUS_REG,
2347                 FH_TSSR_TX_ERROR_REG
2348         };
2349 #ifdef CONFIG_IWLWIFI_DEBUG
2350         if (display) {
2351                 bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
2352                 *buf = kmalloc(bufsz, GFP_KERNEL);
2353                 if (!*buf)
2354                         return -ENOMEM;
2355                 pos += scnprintf(*buf + pos, bufsz - pos,
2356                                 "FH register values:\n");
2357                 for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
2358                         pos += scnprintf(*buf + pos, bufsz - pos,
2359                                 "  %34s: 0X%08x\n",
2360                                 get_fh_string(fh_tbl[i]),
2361                                 iwl_read_direct32(priv, fh_tbl[i]));
2362                 }
2363                 return pos;
2364         }
2365 #endif
2366         IWL_ERR(priv, "FH register values:\n");
2367         for (i = 0; i <  ARRAY_SIZE(fh_tbl); i++) {
2368                 IWL_ERR(priv, "  %34s: 0X%08x\n",
2369                         get_fh_string(fh_tbl[i]),
2370                         iwl_read_direct32(priv, fh_tbl[i]));
2371         }
2372         return 0;
2373 }