]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/wireless/iwlwifi/iwl-core.h
iwlagn: fix modinfo display for 135 ucode.
[karo-tx-linux.git] / drivers / net / wireless / iwlwifi / iwl-core.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called LICENSE.GPL.
26  *
27  * Contact Information:
28  *  Intel Linux Wireless <ilw@linux.intel.com>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  *  * Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  *  * Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in
44  *    the documentation and/or other materials provided with the
45  *    distribution.
46  *  * Neither the name Intel Corporation nor the names of its
47  *    contributors may be used to endorse or promote products derived
48  *    from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *****************************************************************************/
62
63 #ifndef __iwl_core_h__
64 #define __iwl_core_h__
65
66 #include "iwl-dev.h"
67
68 /************************
69  * forward declarations *
70  ************************/
71 struct iwl_host_cmd;
72 struct iwl_cmd;
73
74 #define TIME_UNIT               1024
75
76 struct iwl_lib_ops {
77         /* set hw dependent parameters */
78         int (*set_hw_params)(struct iwl_priv *priv);
79         /* setup BT Rx handler */
80         void (*bt_rx_handler_setup)(struct iwl_priv *priv);
81         /* setup BT related deferred work */
82         void (*bt_setup_deferred_work)(struct iwl_priv *priv);
83         /* cancel deferred work */
84         void (*cancel_deferred_work)(struct iwl_priv *priv);
85         int (*set_channel_switch)(struct iwl_priv *priv,
86                                   struct ieee80211_channel_switch *ch_switch);
87         /* device specific configuration */
88         void (*nic_config)(struct iwl_priv *priv);
89
90         /* eeprom operations (as defined in iwl-eeprom.h) */
91         struct iwl_eeprom_ops eeprom_ops;
92
93         /* temperature */
94         void (*temperature)(struct iwl_priv *priv);
95 };
96
97 /*
98  * @max_ll_items: max number of OTP blocks
99  * @shadow_ram_support: shadow support for OTP memory
100  * @led_compensation: compensate on the led on/off time per HW according
101  *      to the deviation to achieve the desired led frequency.
102  *      The detail algorithm is described in iwl-led.c
103  * @chain_noise_num_beacons: number of beacons used to compute chain noise
104  * @adv_thermal_throttle: support advance thermal throttle
105  * @support_ct_kill_exit: support ct kill exit condition
106  * @support_wimax_coexist: support wimax/wifi co-exist
107  * @plcp_delta_threshold: plcp error rate threshold used to trigger
108  *      radio tuning when there is a high receiving plcp error rate
109  * @chain_noise_scale: default chain noise scale used for gain computation
110  * @wd_timeout: TX queues watchdog timeout
111  * @temperature_kelvin: temperature report by uCode in kelvin
112  * @max_event_log_size: size of event log buffer size for ucode event logging
113  * @shadow_reg_enable: HW shadhow register bit
114  * @no_idle_support: do not support idle mode
115  * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up
116  */
117 struct iwl_base_params {
118         int eeprom_size;
119         int num_of_queues;      /* def: HW dependent */
120         int num_of_ampdu_queues;/* def: HW dependent */
121         /* for iwl_apm_init() */
122         u32 pll_cfg_val;
123
124         const u16 max_ll_items;
125         const bool shadow_ram_support;
126         u16 led_compensation;
127         int chain_noise_num_beacons;
128         bool adv_thermal_throttle;
129         bool support_ct_kill_exit;
130         const bool support_wimax_coexist;
131         u8 plcp_delta_threshold;
132         s32 chain_noise_scale;
133         unsigned int wd_timeout;
134         bool temperature_kelvin;
135         u32 max_event_log_size;
136         const bool shadow_reg_enable;
137         const bool no_idle_support;
138         const bool hd_v2;
139 };
140 /*
141  * @advanced_bt_coexist: support advanced bt coexist
142  * @bt_init_traffic_load: specify initial bt traffic load
143  * @bt_prio_boost: default bt priority boost value
144  * @agg_time_limit: maximum number of uSec in aggregation
145  * @ampdu_factor: Maximum A-MPDU length factor
146  * @ampdu_density: Minimum A-MPDU spacing
147  * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode
148  */
149 struct iwl_bt_params {
150         bool advanced_bt_coexist;
151         u8 bt_init_traffic_load;
152         u8 bt_prio_boost;
153         u16 agg_time_limit;
154         u8 ampdu_factor;
155         u8 ampdu_density;
156         bool bt_sco_disable;
157         bool bt_session_2;
158 };
159 /*
160  * @use_rts_for_aggregation: use rts/cts protection for HT traffic
161  */
162 struct iwl_ht_params {
163         const bool ht_greenfield_support; /* if used set to true */
164         bool use_rts_for_aggregation;
165         enum ieee80211_smps_mode smps_mode;
166 };
167
168 /**
169  * struct iwl_cfg
170  * @name: Offical name of the device
171  * @fw_name_pre: Firmware filename prefix. The api version and extension
172  *      (.ucode) will be added to filename before loading from disk. The
173  *      filename is constructed as fw_name_pre<api>.ucode.
174  * @ucode_api_max: Highest version of uCode API supported by driver.
175  * @ucode_api_ok: oldest version of the uCode API that is OK to load
176  *      without a warning, for use in transitions
177  * @ucode_api_min: Lowest version of uCode API supported by driver.
178  * @valid_tx_ant: valid transmit antenna
179  * @valid_rx_ant: valid receive antenna
180  * @sku: sku information from EEPROM
181  * @eeprom_ver: EEPROM version
182  * @eeprom_calib_ver: EEPROM calibration version
183  * @lib: pointer to the lib ops
184  * @additional_nic_config: additional nic configuration
185  * @base_params: pointer to basic parameters
186  * @ht_params: point to ht patameters
187  * @bt_params: pointer to bt parameters
188  * @pa_type: used by 6000 series only to identify the type of Power Amplifier
189  * @need_dc_calib: need to perform init dc calibration
190  * @need_temp_offset_calib: need to perform temperature offset calibration
191  * @scan_antennas: available antenna for scan operation
192  * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off)
193  * @adv_pm: advance power management
194  * @rx_with_siso_diversity: 1x1 device with rx antenna diversity
195  * @internal_wimax_coex: internal wifi/wimax combo device
196  * @iq_invert: I/Q inversion
197  *
198  * We enable the driver to be backward compatible wrt API version. The
199  * driver specifies which APIs it supports (with @ucode_api_max being the
200  * highest and @ucode_api_min the lowest). Firmware will only be loaded if
201  * it has a supported API version.
202  *
203  * The ideal usage of this infrastructure is to treat a new ucode API
204  * release as a new hardware revision.
205  */
206 struct iwl_cfg {
207         /* params specific to an individual device within a device family */
208         const char *name;
209         const char *fw_name_pre;
210         const unsigned int ucode_api_max;
211         const unsigned int ucode_api_ok;
212         const unsigned int ucode_api_min;
213         u8   valid_tx_ant;
214         u8   valid_rx_ant;
215         u16  sku;
216         u16  eeprom_ver;
217         u16  eeprom_calib_ver;
218         const struct iwl_lib_ops *lib;
219         void (*additional_nic_config)(struct iwl_priv *priv);
220         /* params not likely to change within a device family */
221         struct iwl_base_params *base_params;
222         /* params likely to change within a device family */
223         struct iwl_ht_params *ht_params;
224         struct iwl_bt_params *bt_params;
225         enum iwl_pa_type pa_type;         /* if used set to IWL_PA_SYSTEM */
226         const bool need_dc_calib;         /* if used set to true */
227         const bool need_temp_offset_calib; /* if used set to true */
228         u8 scan_rx_antennas[IEEE80211_NUM_BANDS];
229         enum iwl_led_mode led_mode;
230         const bool adv_pm;
231         const bool rx_with_siso_diversity;
232         const bool internal_wimax_coex;
233         const bool iq_invert;
234 };
235
236 /***************************
237  *   L i b                 *
238  ***************************/
239
240 int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue,
241                     const struct ieee80211_tx_queue_params *params);
242 int iwl_mac_tx_last_beacon(struct ieee80211_hw *hw);
243 void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, struct iwl_rxon_context *ctx,
244                            int hw_decrypt);
245 int iwl_check_rxon_cmd(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
246 int iwl_full_rxon_required(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
247 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch,
248                          struct iwl_rxon_context *ctx);
249 void iwl_set_flags_for_band(struct iwl_priv *priv,
250                             struct iwl_rxon_context *ctx,
251                             enum ieee80211_band band,
252                             struct ieee80211_vif *vif);
253 u8 iwl_get_single_channel_number(struct iwl_priv *priv,
254                                   enum ieee80211_band band);
255 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
256 bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
257                             struct iwl_rxon_context *ctx,
258                             struct ieee80211_sta_ht_cap *ht_cap);
259 void iwl_connection_init_rx_config(struct iwl_priv *priv,
260                                    struct iwl_rxon_context *ctx);
261 void iwl_set_rate(struct iwl_priv *priv);
262 int iwl_mac_add_interface(struct ieee80211_hw *hw,
263                           struct ieee80211_vif *vif);
264 void iwl_mac_remove_interface(struct ieee80211_hw *hw,
265                               struct ieee80211_vif *vif);
266 int iwl_mac_change_interface(struct ieee80211_hw *hw,
267                              struct ieee80211_vif *vif,
268                              enum nl80211_iftype newtype, bool newp2p);
269 #ifdef CONFIG_IWLWIFI_DEBUGFS
270 int iwl_alloc_traffic_mem(struct iwl_priv *priv);
271 void iwl_free_traffic_mem(struct iwl_priv *priv);
272 void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
273                                 u16 length, struct ieee80211_hdr *header);
274 void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
275                                 u16 length, struct ieee80211_hdr *header);
276 const char *get_mgmt_string(int cmd);
277 const char *get_ctrl_string(int cmd);
278 void iwl_clear_traffic_stats(struct iwl_priv *priv);
279 void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc,
280                       u16 len);
281 #else
282 static inline int iwl_alloc_traffic_mem(struct iwl_priv *priv)
283 {
284         return 0;
285 }
286 static inline void iwl_free_traffic_mem(struct iwl_priv *priv)
287 {
288 }
289 static inline void iwl_reset_traffic_log(struct iwl_priv *priv)
290 {
291 }
292 static inline void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv,
293                       u16 length, struct ieee80211_hdr *header)
294 {
295 }
296 static inline void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv,
297                       u16 length, struct ieee80211_hdr *header)
298 {
299 }
300 static inline void iwl_update_stats(struct iwl_priv *priv, bool is_tx,
301                                     __le16 fc, u16 len)
302 {
303 }
304 #endif
305
306 /*****************************************************
307 * RX
308 ******************************************************/
309 void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);
310
311 void iwl_setup_watchdog(struct iwl_priv *priv);
312 /*****************************************************
313  * TX power
314  ****************************************************/
315 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force);
316
317 /*******************************************************************************
318  * Scanning
319  ******************************************************************************/
320 void iwl_init_scan_params(struct iwl_priv *priv);
321 int iwl_scan_cancel(struct iwl_priv *priv);
322 int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms);
323 void iwl_force_scan_end(struct iwl_priv *priv);
324 int iwl_mac_hw_scan(struct ieee80211_hw *hw,
325                     struct ieee80211_vif *vif,
326                     struct cfg80211_scan_request *req);
327 void iwl_internal_short_hw_scan(struct iwl_priv *priv);
328 int iwl_force_reset(struct iwl_priv *priv, int mode, bool external);
329 u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame,
330                        const u8 *ta, const u8 *ie, int ie_len, int left);
331 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
332 u16 iwl_get_active_dwell_time(struct iwl_priv *priv,
333                               enum ieee80211_band band,
334                               u8 n_probes);
335 u16 iwl_get_passive_dwell_time(struct iwl_priv *priv,
336                                enum ieee80211_band band,
337                                struct ieee80211_vif *vif);
338 void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
339 void iwl_cancel_scan_deferred_work(struct iwl_priv *priv);
340 int __must_check iwl_scan_initiate(struct iwl_priv *priv,
341                                    struct ieee80211_vif *vif,
342                                    enum iwl_scan_type scan_type,
343                                    enum ieee80211_band band);
344
345 /* For faster active scanning, scan will move to the next channel if fewer than
346  * PLCP_QUIET_THRESH packets are heard on this channel within
347  * ACTIVE_QUIET_TIME after sending probe request.  This shortens the dwell
348  * time if it's a quiet channel (nothing responded to our probe, and there's
349  * no other traffic).
350  * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
351 #define IWL_ACTIVE_QUIET_TIME       cpu_to_le16(10)  /* msec */
352 #define IWL_PLCP_QUIET_THRESH       cpu_to_le16(1)  /* packets */
353
354 #define IWL_SCAN_CHECK_WATCHDOG         (HZ * 7)
355
356 /*****************************************************
357  *   S e n d i n g     H o s t     C o m m a n d s   *
358  *****************************************************/
359
360 void iwl_bg_watchdog(unsigned long data);
361 u32 iwl_usecs_to_beacons(struct iwl_priv *priv, u32 usec, u32 beacon_interval);
362 __le32 iwl_add_beacon_time(struct iwl_priv *priv, u32 base,
363                            u32 addon, u32 beacon_interval);
364
365
366 /*****************************************************
367 *  GEOS
368 ******************************************************/
369 int iwl_init_geos(struct iwl_priv *priv);
370 void iwl_free_geos(struct iwl_priv *priv);
371
372 extern void iwl_send_bt_config(struct iwl_priv *priv);
373 extern int iwl_send_statistics_request(struct iwl_priv *priv,
374                                        u8 flags, bool clear);
375
376 int iwl_send_rxon_timing(struct iwl_priv *priv, struct iwl_rxon_context *ctx);
377
378 static inline const struct ieee80211_supported_band *iwl_get_hw_mode(
379                         struct iwl_priv *priv, enum ieee80211_band band)
380 {
381         return priv->hw->wiphy->bands[band];
382 }
383
384 static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv)
385 {
386         return priv->cfg->bt_params &&
387                priv->cfg->bt_params->advanced_bt_coexist;
388 }
389
390 extern bool bt_siso_mode;
391
392 #endif /* __iwl_core_h__ */