]> git.karo-electronics.de Git - mv-sheeva.git/blob - drivers/net/wireless/iwlwifi/iwl-dev.h
iwlwifi: handle unicast PS buffering
[mv-sheeva.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 /*
27  * Please use this file (iwl-dev.h) for driver implementation definitions.
28  * Please use iwl-commands.h for uCode API definitions.
29  * Please use iwl-4965-hw.h for hardware-related definitions.
30  */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49
50 /* configuration for the iwl4965 */
51 extern struct iwl_cfg iwl4965_agn_cfg;
52 extern struct iwl_cfg iwl5300_agn_cfg;
53 extern struct iwl_cfg iwl5100_agn_cfg;
54 extern struct iwl_cfg iwl5350_agn_cfg;
55 extern struct iwl_cfg iwl5100_bg_cfg;
56 extern struct iwl_cfg iwl5100_abg_cfg;
57 extern struct iwl_cfg iwl5150_agn_cfg;
58 extern struct iwl_cfg iwl6000i_2agn_cfg;
59 extern struct iwl_cfg iwl6000i_2abg_cfg;
60 extern struct iwl_cfg iwl6000i_2bg_cfg;
61 extern struct iwl_cfg iwl6000_3agn_cfg;
62 extern struct iwl_cfg iwl6050_2agn_cfg;
63 extern struct iwl_cfg iwl6050_2abg_cfg;
64 extern struct iwl_cfg iwl1000_bgn_cfg;
65 extern struct iwl_cfg iwl1000_bg_cfg;
66
67 struct iwl_tx_queue;
68
69 /* shared structures from iwl-5000.c */
70 extern struct iwl_mod_params iwl50_mod_params;
71 extern struct iwl_ucode_ops iwl5000_ucode;
72 extern struct iwl_lib_ops iwl5000_lib;
73 extern struct iwl_hcmd_ops iwl5000_hcmd;
74 extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
75
76 /* shared functions from iwl-5000.c */
77 extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
78 extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
79                                      u8 *data);
80 extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
81                                     __le32 *tx_flags);
82 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
83                              struct iwl_rx_phy_res *rx_resp);
84 extern void iwl5000_nic_config(struct iwl_priv *priv);
85 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
86 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
87                                     size_t offset);
88 extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
89                                             struct iwl_tx_queue *txq,
90                                             u16 byte_cnt);
91 extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
92                                     struct iwl_tx_queue *txq);
93 extern int iwl5000_load_ucode(struct iwl_priv *priv);
94 extern void iwl5000_init_alive_start(struct iwl_priv *priv);
95 extern int iwl5000_alive_notify(struct iwl_priv *priv);
96 extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
97 extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
98                            int tx_fifo, int sta_id, int tid, u16 ssn_idx);
99 extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
100                             u16 ssn_idx, u8 tx_fifo);
101 extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
102 extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
103 extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
104 extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
105 extern int iwl5000_send_tx_power(struct iwl_priv *priv);
106 extern void iwl5000_temperature(struct iwl_priv *priv);
107
108 /* CT-KILL constants */
109 #define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
110 #define CT_KILL_THRESHOLD          114 /* in Celsius */
111 #define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
112
113 /* Default noise level to report when noise measurement is not available.
114  *   This may be because we're:
115  *   1)  Not associated (4965, no beacon statistics being sent to driver)
116  *   2)  Scanning (noise measurement does not apply to associated channel)
117  *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
118  * Use default noise value of -127 ... this is below the range of measurable
119  *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
120  *   Also, -127 works better than 0 when averaging frames with/without
121  *   noise info (e.g. averaging might be done in app); measured dBm values are
122  *   always negative ... using a negative value as the default keeps all
123  *   averages within an s8's (used in some apps) range of negative values. */
124 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
125
126 /*
127  * RTS threshold here is total size [2347] minus 4 FCS bytes
128  * Per spec:
129  *   a value of 0 means RTS on all data/management packets
130  *   a value > max MSDU size means no RTS
131  * else RTS for data/management frames where MPDU is larger
132  *   than RTS value.
133  */
134 #define DEFAULT_RTS_THRESHOLD     2347U
135 #define MIN_RTS_THRESHOLD         0U
136 #define MAX_RTS_THRESHOLD         2347U
137 #define MAX_MSDU_SIZE             2304U
138 #define MAX_MPDU_SIZE             2346U
139 #define DEFAULT_BEACON_INTERVAL   100U
140 #define DEFAULT_SHORT_RETRY_LIMIT 7U
141 #define DEFAULT_LONG_RETRY_LIMIT  4U
142
143 struct iwl_rx_mem_buffer {
144         dma_addr_t page_dma;
145         struct page *page;
146         struct list_head list;
147 };
148
149 #define rxb_addr(r) page_address(r->page)
150
151 /* defined below */
152 struct iwl_device_cmd;
153
154 struct iwl_cmd_meta {
155         /* only for SYNC commands, iff the reply skb is wanted */
156         struct iwl_host_cmd *source;
157         /*
158          * only for ASYNC commands
159          * (which is somewhat stupid -- look at iwl-sta.c for instance
160          * which duplicates a bunch of code because the callback isn't
161          * invoked for SYNC commands, if it were and its result passed
162          * through it would be simpler...)
163          */
164         void (*callback)(struct iwl_priv *priv,
165                          struct iwl_device_cmd *cmd,
166                          struct iwl_rx_packet *pkt);
167
168         /* The CMD_SIZE_HUGE flag bit indicates that the command
169          * structure is stored at the end of the shared queue memory. */
170         u32 flags;
171
172         DECLARE_PCI_UNMAP_ADDR(mapping)
173         DECLARE_PCI_UNMAP_LEN(len)
174 };
175
176 /*
177  * Generic queue structure
178  *
179  * Contains common data for Rx and Tx queues
180  */
181 struct iwl_queue {
182         int n_bd;              /* number of BDs in this queue */
183         int write_ptr;       /* 1-st empty entry (index) host_w*/
184         int read_ptr;         /* last used entry (index) host_r*/
185         dma_addr_t dma_addr;   /* physical addr for BD's */
186         int n_window;          /* safe queue window */
187         u32 id;
188         int low_mark;          /* low watermark, resume queue if free
189                                 * space more than this */
190         int high_mark;         /* high watermark, stop queue if free
191                                 * space less than this */
192 } __attribute__ ((packed));
193
194 /* One for each TFD */
195 struct iwl_tx_info {
196         struct sk_buff *skb[IWL_NUM_OF_TBS - 1];
197 };
198
199 /**
200  * struct iwl_tx_queue - Tx Queue for DMA
201  * @q: generic Rx/Tx queue descriptor
202  * @bd: base of circular buffer of TFDs
203  * @cmd: array of command/TX buffer pointers
204  * @meta: array of meta data for each command/tx buffer
205  * @dma_addr_cmd: physical address of cmd/tx buffer array
206  * @txb: array of per-TFD driver data
207  * @need_update: indicates need to update read/write index
208  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
209  *
210  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
211  * descriptors) and required locking structures.
212  */
213 #define TFD_TX_CMD_SLOTS 256
214 #define TFD_CMD_SLOTS 32
215
216 struct iwl_tx_queue {
217         struct iwl_queue q;
218         void *tfds;
219         struct iwl_device_cmd **cmd;
220         struct iwl_cmd_meta *meta;
221         struct iwl_tx_info *txb;
222         u8 need_update;
223         u8 sched_retry;
224         u8 active;
225         u8 swq_id;
226 };
227
228 #define IWL_NUM_SCAN_RATES         (2)
229
230 struct iwl4965_channel_tgd_info {
231         u8 type;
232         s8 max_power;
233 };
234
235 struct iwl4965_channel_tgh_info {
236         s64 last_radar_time;
237 };
238
239 #define IWL4965_MAX_RATE (33)
240
241 struct iwl3945_clip_group {
242         /* maximum power level to prevent clipping for each rate, derived by
243          *   us from this band's saturation power in EEPROM */
244         const s8 clip_powers[IWL_MAX_RATES];
245 };
246
247 /* current Tx power values to use, one for each rate for each channel.
248  * requested power is limited by:
249  * -- regulatory EEPROM limits for this channel
250  * -- hardware capabilities (clip-powers)
251  * -- spectrum management
252  * -- user preference (e.g. iwconfig)
253  * when requested power is set, base power index must also be set. */
254 struct iwl3945_channel_power_info {
255         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
256         s8 power_table_index;   /* actual (compenst'd) index into gain table */
257         s8 base_power_index;    /* gain index for power at factory temp. */
258         s8 requested_power;     /* power (dBm) requested for this chnl/rate */
259 };
260
261 /* current scan Tx power values to use, one for each scan rate for each
262  * channel. */
263 struct iwl3945_scan_power_info {
264         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
265         s8 power_table_index;   /* actual (compenst'd) index into gain table */
266         s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
267 };
268
269 /*
270  * One for each channel, holds all channel setup data
271  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
272  *     with one another!
273  */
274 struct iwl_channel_info {
275         struct iwl4965_channel_tgd_info tgd;
276         struct iwl4965_channel_tgh_info tgh;
277         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
278         struct iwl_eeprom_channel ht40_eeprom;  /* EEPROM regulatory limit for
279                                                  * HT40 channel */
280
281         u8 channel;       /* channel number */
282         u8 flags;         /* flags copied from EEPROM */
283         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
284         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) limit */
285         s8 min_power;     /* always 0 */
286         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
287
288         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
289         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
290         enum ieee80211_band band;
291
292         /* HT40 channel info */
293         s8 ht40_max_power_avg;  /* (dBm) regul. eeprom, normal Tx, any rate */
294         u8 ht40_flags;          /* flags copied from EEPROM */
295         u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
296
297         /* Radio/DSP gain settings for each "normal" data Tx rate.
298          * These include, in addition to RF and DSP gain, a few fields for
299          *   remembering/modifying gain settings (indexes). */
300         struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
301
302         /* Radio/DSP gain settings for each scan rate, for directed scans. */
303         struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
304 };
305
306 #define IWL_TX_FIFO_AC0 0
307 #define IWL_TX_FIFO_AC1 1
308 #define IWL_TX_FIFO_AC2 2
309 #define IWL_TX_FIFO_AC3 3
310 #define IWL_TX_FIFO_HCCA_1      5
311 #define IWL_TX_FIFO_HCCA_2      6
312 #define IWL_TX_FIFO_NONE        7
313
314 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
315  * Set the minimum to accommodate the 4 standard TX queues, 1 command
316  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
317 #define IWL_MIN_NUM_QUEUES      10
318
319 /*
320  * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00,
321  * the driver maps it into the appropriate device FIFO for the
322  * uCode.
323  */
324 #define IWL_CMD_QUEUE_NUM       4
325
326 /* Power management (not Tx power) structures */
327
328 enum iwl_pwr_src {
329         IWL_PWR_SRC_VMAIN,
330         IWL_PWR_SRC_VAUX,
331 };
332
333 #define IEEE80211_DATA_LEN              2304
334 #define IEEE80211_4ADDR_LEN             30
335 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
336 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
337
338 struct iwl_frame {
339         union {
340                 struct ieee80211_hdr frame;
341                 struct iwl_tx_beacon_cmd beacon;
342                 u8 raw[IEEE80211_FRAME_LEN];
343                 u8 cmd[360];
344         } u;
345         struct list_head list;
346 };
347
348 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
349 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
350 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
351
352 enum {
353         CMD_SYNC = 0,
354         CMD_SIZE_NORMAL = 0,
355         CMD_NO_SKB = 0,
356         CMD_SIZE_HUGE = (1 << 0),
357         CMD_ASYNC = (1 << 1),
358         CMD_WANT_SKB = (1 << 2),
359 };
360
361 #define DEF_CMD_PAYLOAD_SIZE 320
362
363 /*
364  * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header,
365  * SNAP header and alignment. It should also be big enough for 802.11
366  * control frames.
367  */
368 #define IWL_LINK_HDR_MAX 64
369
370 /**
371  * struct iwl_device_cmd
372  *
373  * For allocation of the command and tx queues, this establishes the overall
374  * size of the largest command we send to uCode, except for a scan command
375  * (which is relatively huge; space is allocated separately).
376  */
377 struct iwl_device_cmd {
378         struct iwl_cmd_header hdr;      /* uCode API */
379         union {
380                 u32 flags;
381                 u8 val8;
382                 u16 val16;
383                 u32 val32;
384                 struct iwl_tx_cmd tx;
385                 struct iwl6000_channel_switch_cmd chswitch;
386                 u8 payload[DEF_CMD_PAYLOAD_SIZE];
387         } __attribute__ ((packed)) cmd;
388 } __attribute__ ((packed));
389
390 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
391
392
393 struct iwl_host_cmd {
394         const void *data;
395         unsigned long reply_page;
396         void (*callback)(struct iwl_priv *priv,
397                          struct iwl_device_cmd *cmd,
398                          struct iwl_rx_packet *pkt);
399         u32 flags;
400         u16 len;
401         u8 id;
402 };
403
404 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
405 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
406 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
407
408 /**
409  * struct iwl_rx_queue - Rx queue
410  * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
411  * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
412  * @read: Shared index to newest available Rx buffer
413  * @write: Shared index to oldest written Rx packet
414  * @free_count: Number of pre-allocated buffers in rx_free
415  * @rx_free: list of free SKBs for use
416  * @rx_used: List of Rx buffers with no SKB
417  * @need_update: flag to indicate we need to update read/write index
418  * @rb_stts: driver's pointer to receive buffer status
419  * @rb_stts_dma: bus address of receive buffer status
420  *
421  * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
422  */
423 struct iwl_rx_queue {
424         __le32 *bd;
425         dma_addr_t dma_addr;
426         struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
427         struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
428         u32 read;
429         u32 write;
430         u32 free_count;
431         u32 write_actual;
432         struct list_head rx_free;
433         struct list_head rx_used;
434         int need_update;
435         struct iwl_rb_status *rb_stts;
436         dma_addr_t rb_stts_dma;
437         spinlock_t lock;
438 };
439
440 #define IWL_SUPPORTED_RATES_IE_LEN         8
441
442 #define MAX_TID_COUNT        9
443
444 #define IWL_INVALID_RATE     0xFF
445 #define IWL_INVALID_VALUE    -1
446
447 /**
448  * struct iwl_ht_agg -- aggregation status while waiting for block-ack
449  * @txq_id: Tx queue used for Tx attempt
450  * @frame_count: # frames attempted by Tx command
451  * @wait_for_ba: Expect block-ack before next Tx reply
452  * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
453  * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
454  * @bitmap1: High order, one bit for each frame pending ACK in Tx window
455  * @rate_n_flags: Rate at which Tx was attempted
456  *
457  * If REPLY_TX indicates that aggregation was attempted, driver must wait
458  * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
459  * until block ack arrives.
460  */
461 struct iwl_ht_agg {
462         u16 txq_id;
463         u16 frame_count;
464         u16 wait_for_ba;
465         u16 start_idx;
466         u64 bitmap;
467         u32 rate_n_flags;
468 #define IWL_AGG_OFF 0
469 #define IWL_AGG_ON 1
470 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
471 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
472         u8 state;
473 };
474
475
476 struct iwl_tid_data {
477         u16 seq_number;
478         u16 tfds_in_queue;
479         struct iwl_ht_agg agg;
480 };
481
482 struct iwl_hw_key {
483         enum ieee80211_key_alg alg;
484         int keylen;
485         u8 keyidx;
486         u8 key[32];
487 };
488
489 union iwl_ht_rate_supp {
490         u16 rates;
491         struct {
492                 u8 siso_rate;
493                 u8 mimo_rate;
494         };
495 };
496
497 #define CFG_HT_RX_AMPDU_FACTOR_DEF  (0x3)
498
499 /*
500  * Maximal MPDU density for TX aggregation
501  * 4 - 2us density
502  * 5 - 4us density
503  * 6 - 8us density
504  * 7 - 16us density
505  */
506 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
507 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
508
509 struct iwl_ht_config {
510         /* self configuration data */
511         bool is_ht;
512         bool is_40mhz;
513         bool single_chain_sufficient;
514         u8 sm_ps;
515         /* BSS related data */
516         u8 extension_chan_offset;
517         u8 ht_protection;
518         u8 non_GF_STA_present;
519 };
520
521 union iwl_qos_capabity {
522         struct {
523                 u8 edca_count:4;        /* bit 0-3 */
524                 u8 q_ack:1;             /* bit 4 */
525                 u8 queue_request:1;     /* bit 5 */
526                 u8 txop_request:1;      /* bit 6 */
527                 u8 reserved:1;          /* bit 7 */
528         } q_AP;
529         struct {
530                 u8 acvo_APSD:1;         /* bit 0 */
531                 u8 acvi_APSD:1;         /* bit 1 */
532                 u8 ac_bk_APSD:1;        /* bit 2 */
533                 u8 ac_be_APSD:1;        /* bit 3 */
534                 u8 q_ack:1;             /* bit 4 */
535                 u8 max_len:2;           /* bit 5-6 */
536                 u8 more_data_ack:1;     /* bit 7 */
537         } q_STA;
538         u8 val;
539 };
540
541 /* QoS structures */
542 struct iwl_qos_info {
543         int qos_active;
544         union iwl_qos_capabity qos_cap;
545         struct iwl_qosparam_cmd def_qos_parm;
546 };
547
548
549 struct iwl3945_station_entry {
550         struct iwl3945_addsta_cmd sta;
551         struct iwl_tid_data tid[MAX_TID_COUNT];
552         u8 used;
553         struct iwl_hw_key keyinfo;
554 };
555
556 struct iwl_station_entry {
557         struct iwl_addsta_cmd sta;
558         struct iwl_tid_data tid[MAX_TID_COUNT];
559         u8 used;
560         struct iwl_hw_key keyinfo;
561 };
562
563 /*
564  * iwl_station_priv: Driver's private station information
565  *
566  * When mac80211 creates a station it reserves some space (hw->sta_data_size)
567  * in the structure for use by driver. This structure is places in that
568  * space.
569  */
570 struct iwl_station_priv {
571         struct iwl_lq_sta lq_sta;
572         atomic_t pending_frames;
573         bool client;
574         bool asleep;
575 };
576
577 /* one for each uCode image (inst/data, boot/init/runtime) */
578 struct fw_desc {
579         void *v_addr;           /* access by driver */
580         dma_addr_t p_addr;      /* access by card's busmaster DMA */
581         u32 len;                /* bytes */
582 };
583
584 /* uCode file layout */
585 struct iwl_ucode_header {
586         __le32 ver;     /* major/minor/API/serial */
587         union {
588                 struct {
589                         __le32 inst_size;       /* bytes of runtime code */
590                         __le32 data_size;       /* bytes of runtime data */
591                         __le32 init_size;       /* bytes of init code */
592                         __le32 init_data_size;  /* bytes of init data */
593                         __le32 boot_size;       /* bytes of bootstrap code */
594                         u8 data[0];             /* in same order as sizes */
595                 } v1;
596                 struct {
597                         __le32 build;           /* build number */
598                         __le32 inst_size;       /* bytes of runtime code */
599                         __le32 data_size;       /* bytes of runtime data */
600                         __le32 init_size;       /* bytes of init code */
601                         __le32 init_data_size;  /* bytes of init data */
602                         __le32 boot_size;       /* bytes of bootstrap code */
603                         u8 data[0];             /* in same order as sizes */
604                 } v2;
605         } u;
606 };
607 #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
608
609 struct iwl4965_ibss_seq {
610         u8 mac[ETH_ALEN];
611         u16 seq_num;
612         u16 frag_num;
613         unsigned long packet_time;
614         struct list_head list;
615 };
616
617 struct iwl_sensitivity_ranges {
618         u16 min_nrg_cck;
619         u16 max_nrg_cck;
620
621         u16 nrg_th_cck;
622         u16 nrg_th_ofdm;
623
624         u16 auto_corr_min_ofdm;
625         u16 auto_corr_min_ofdm_mrc;
626         u16 auto_corr_min_ofdm_x1;
627         u16 auto_corr_min_ofdm_mrc_x1;
628
629         u16 auto_corr_max_ofdm;
630         u16 auto_corr_max_ofdm_mrc;
631         u16 auto_corr_max_ofdm_x1;
632         u16 auto_corr_max_ofdm_mrc_x1;
633
634         u16 auto_corr_max_cck;
635         u16 auto_corr_max_cck_mrc;
636         u16 auto_corr_min_cck;
637         u16 auto_corr_min_cck_mrc;
638
639         u16 barker_corr_th_min;
640         u16 barker_corr_th_min_mrc;
641         u16 nrg_th_cca;
642 };
643
644
645 #define KELVIN_TO_CELSIUS(x) ((x)-273)
646 #define CELSIUS_TO_KELVIN(x) ((x)+273)
647
648
649 /**
650  * struct iwl_hw_params
651  * @max_txq_num: Max # Tx queues supported
652  * @dma_chnl_num: Number of Tx DMA/FIFO channels
653  * @scd_bc_tbls_size: size of scheduler byte count tables
654  * @tfd_size: TFD size
655  * @tx/rx_chains_num: Number of TX/RX chains
656  * @valid_tx/rx_ant: usable antennas
657  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
658  * @max_rxq_log: Log-base-2 of max_rxq_size
659  * @rx_page_order: Rx buffer page order
660  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
661  * @max_stations:
662  * @bcast_sta_id:
663  * @ht40_channel: is 40MHz width possible in band 2.4
664  * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
665  * @sw_crypto: 0 for hw, 1 for sw
666  * @max_xxx_size: for ucode uses
667  * @ct_kill_threshold: temperature threshold
668  * @calib_init_cfg: setup initial calibrations for the hw
669  * @struct iwl_sensitivity_ranges: range of sensitivity values
670  */
671 struct iwl_hw_params {
672         u8 max_txq_num;
673         u8 dma_chnl_num;
674         u16 scd_bc_tbls_size;
675         u32 tfd_size;
676         u8  tx_chains_num;
677         u8  rx_chains_num;
678         u8  valid_tx_ant;
679         u8  valid_rx_ant;
680         u16 max_rxq_size;
681         u16 max_rxq_log;
682         u32 rx_page_order;
683         u32 rx_wrt_ptr_reg;
684         u8  max_stations;
685         u8  bcast_sta_id;
686         u8  ht40_channel;
687         u8  max_beacon_itrvl;   /* in 1024 ms */
688         u32 max_inst_size;
689         u32 max_data_size;
690         u32 max_bsm_size;
691         u32 ct_kill_threshold; /* value in hw-dependent units */
692         u32 ct_kill_exit_threshold; /* value in hw-dependent units */
693                                     /* for 1000, 6000 series and up */
694         u32 calib_init_cfg;
695         const struct iwl_sensitivity_ranges *sens;
696 };
697
698
699 /******************************************************************************
700  *
701  * Functions implemented in core module which are forward declared here
702  * for use by iwl-[4-5].c
703  *
704  * NOTE:  The implementation of these functions are not hardware specific
705  * which is why they are in the core module files.
706  *
707  * Naming convention --
708  * iwl_         <-- Is part of iwlwifi
709  * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
710  * iwl4965_bg_      <-- Called from work queue context
711  * iwl4965_mac_     <-- mac80211 callback
712  *
713  ****************************************************************************/
714 extern void iwl_update_chain_flags(struct iwl_priv *priv);
715 extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
716 extern const u8 iwl_bcast_addr[ETH_ALEN];
717 extern int iwl_rxq_stop(struct iwl_priv *priv);
718 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
719 extern int iwl_queue_space(const struct iwl_queue *q);
720 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
721 {
722         return q->write_ptr > q->read_ptr ?
723                 (i >= q->read_ptr && i < q->write_ptr) :
724                 !(i < q->read_ptr && i >= q->write_ptr);
725 }
726
727
728 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
729 {
730         /*
731          * This is for init calibration result and scan command which
732          * required buffer > TFD_MAX_PAYLOAD_SIZE,
733          * the big buffer at end of command array
734          */
735         if (is_huge)
736                 return q->n_window;     /* must be power of 2 */
737
738         /* Otherwise, use normal size buffers */
739         return index & (q->n_window - 1);
740 }
741
742
743 struct iwl_dma_ptr {
744         dma_addr_t dma;
745         void *addr;
746         size_t size;
747 };
748
749 #define IWL_OPERATION_MODE_AUTO     0
750 #define IWL_OPERATION_MODE_HT_ONLY  1
751 #define IWL_OPERATION_MODE_MIXED    2
752 #define IWL_OPERATION_MODE_20MHZ    3
753
754 #define IWL_TX_CRC_SIZE 4
755 #define IWL_TX_DELIMITER_SIZE 4
756
757 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
758
759 /* Sensitivity and chain noise calibration */
760 #define INITIALIZATION_VALUE            0xFFFF
761 #define IWL4965_CAL_NUM_BEACONS         20
762 #define IWL_CAL_NUM_BEACONS             16
763 #define MAXIMUM_ALLOWED_PATHLOSS        15
764
765 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
766
767 #define MAX_FA_OFDM  50
768 #define MIN_FA_OFDM  5
769 #define MAX_FA_CCK   50
770 #define MIN_FA_CCK   5
771
772 #define AUTO_CORR_STEP_OFDM       1
773
774 #define AUTO_CORR_STEP_CCK     3
775 #define AUTO_CORR_MAX_TH_CCK   160
776
777 #define NRG_DIFF               2
778 #define NRG_STEP_CCK           2
779 #define NRG_MARGIN             8
780 #define MAX_NUMBER_CCK_NO_FA 100
781
782 #define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
783
784 #define CHAIN_A             0
785 #define CHAIN_B             1
786 #define CHAIN_C             2
787 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
788 #define ALL_BAND_FILTER                 0xFF00
789 #define IN_BAND_FILTER                  0xFF
790 #define MIN_AVERAGE_NOISE_MAX_VALUE     0xFFFFFFFF
791
792 #define NRG_NUM_PREV_STAT_L     20
793 #define NUM_RX_CHAINS           3
794
795 enum iwl4965_false_alarm_state {
796         IWL_FA_TOO_MANY = 0,
797         IWL_FA_TOO_FEW = 1,
798         IWL_FA_GOOD_RANGE = 2,
799 };
800
801 enum iwl4965_chain_noise_state {
802         IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
803         IWL_CHAIN_NOISE_ACCUMULATE,
804         IWL_CHAIN_NOISE_CALIBRATED,
805         IWL_CHAIN_NOISE_DONE,
806 };
807
808 enum iwl4965_calib_enabled_state {
809         IWL_CALIB_DISABLED = 0,  /* must be 0 */
810         IWL_CALIB_ENABLED = 1,
811 };
812
813
814 /*
815  * enum iwl_calib
816  * defines the order in which results of initial calibrations
817  * should be sent to the runtime uCode
818  */
819 enum iwl_calib {
820         IWL_CALIB_XTAL,
821         IWL_CALIB_DC,
822         IWL_CALIB_LO,
823         IWL_CALIB_TX_IQ,
824         IWL_CALIB_TX_IQ_PERD,
825         IWL_CALIB_BASE_BAND,
826         IWL_CALIB_MAX
827 };
828
829 /* Opaque calibration results */
830 struct iwl_calib_result {
831         void *buf;
832         size_t buf_len;
833 };
834
835 enum ucode_type {
836         UCODE_NONE = 0,
837         UCODE_INIT,
838         UCODE_RT
839 };
840
841 /* Sensitivity calib data */
842 struct iwl_sensitivity_data {
843         u32 auto_corr_ofdm;
844         u32 auto_corr_ofdm_mrc;
845         u32 auto_corr_ofdm_x1;
846         u32 auto_corr_ofdm_mrc_x1;
847         u32 auto_corr_cck;
848         u32 auto_corr_cck_mrc;
849
850         u32 last_bad_plcp_cnt_ofdm;
851         u32 last_fa_cnt_ofdm;
852         u32 last_bad_plcp_cnt_cck;
853         u32 last_fa_cnt_cck;
854
855         u32 nrg_curr_state;
856         u32 nrg_prev_state;
857         u32 nrg_value[10];
858         u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
859         u32 nrg_silence_ref;
860         u32 nrg_energy_idx;
861         u32 nrg_silence_idx;
862         u32 nrg_th_cck;
863         s32 nrg_auto_corr_silence_diff;
864         u32 num_in_cck_no_fa;
865         u32 nrg_th_ofdm;
866
867         u16 barker_corr_th_min;
868         u16 barker_corr_th_min_mrc;
869         u16 nrg_th_cca;
870 };
871
872 /* Chain noise (differential Rx gain) calib data */
873 struct iwl_chain_noise_data {
874         u32 active_chains;
875         u32 chain_noise_a;
876         u32 chain_noise_b;
877         u32 chain_noise_c;
878         u32 chain_signal_a;
879         u32 chain_signal_b;
880         u32 chain_signal_c;
881         u16 beacon_count;
882         u8 disconn_array[NUM_RX_CHAINS];
883         u8 delta_gain_code[NUM_RX_CHAINS];
884         u8 radio_write;
885         u8 state;
886 };
887
888 #define EEPROM_SEM_TIMEOUT 10           /* milliseconds */
889 #define EEPROM_SEM_RETRY_LIMIT 1000     /* number of attempts (not time) */
890
891 #define IWL_TRAFFIC_ENTRIES     (256)
892 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
893
894 enum {
895         MEASUREMENT_READY = (1 << 0),
896         MEASUREMENT_ACTIVE = (1 << 1),
897 };
898
899 enum iwl_nvm_type {
900         NVM_DEVICE_TYPE_EEPROM = 0,
901         NVM_DEVICE_TYPE_OTP,
902 };
903
904 /*
905  * Two types of OTP memory access modes
906  *   IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
907  *                              based on physical memory addressing
908  *   IWL_OTP_ACCESS_RELATIVE - relative address mode,
909  *                             based on logical memory addressing
910  */
911 enum iwl_access_mode {
912         IWL_OTP_ACCESS_ABSOLUTE,
913         IWL_OTP_ACCESS_RELATIVE,
914 };
915
916 /**
917  * enum iwl_pa_type - Power Amplifier type
918  * @IWL_PA_SYSTEM:  based on uCode configuration
919  * @IWL_PA_INTERNAL: use Internal only
920  */
921 enum iwl_pa_type {
922         IWL_PA_SYSTEM = 0,
923         IWL_PA_INTERNAL = 1,
924 };
925
926 /* interrupt statistics */
927 struct isr_statistics {
928         u32 hw;
929         u32 sw;
930         u32 sw_err;
931         u32 sch;
932         u32 alive;
933         u32 rfkill;
934         u32 ctkill;
935         u32 wakeup;
936         u32 rx;
937         u32 rx_handlers[REPLY_MAX];
938         u32 tx;
939         u32 unhandled;
940 };
941
942 #ifdef CONFIG_IWLWIFI_DEBUGFS
943 /* management statistics */
944 enum iwl_mgmt_stats {
945         MANAGEMENT_ASSOC_REQ = 0,
946         MANAGEMENT_ASSOC_RESP,
947         MANAGEMENT_REASSOC_REQ,
948         MANAGEMENT_REASSOC_RESP,
949         MANAGEMENT_PROBE_REQ,
950         MANAGEMENT_PROBE_RESP,
951         MANAGEMENT_BEACON,
952         MANAGEMENT_ATIM,
953         MANAGEMENT_DISASSOC,
954         MANAGEMENT_AUTH,
955         MANAGEMENT_DEAUTH,
956         MANAGEMENT_ACTION,
957         MANAGEMENT_MAX,
958 };
959 /* control statistics */
960 enum iwl_ctrl_stats {
961         CONTROL_BACK_REQ =  0,
962         CONTROL_BACK,
963         CONTROL_PSPOLL,
964         CONTROL_RTS,
965         CONTROL_CTS,
966         CONTROL_ACK,
967         CONTROL_CFEND,
968         CONTROL_CFENDACK,
969         CONTROL_MAX,
970 };
971
972 struct traffic_stats {
973         u32 mgmt[MANAGEMENT_MAX];
974         u32 ctrl[CONTROL_MAX];
975         u32 data_cnt;
976         u64 data_bytes;
977 };
978 #else
979 struct traffic_stats {
980         u64 data_bytes;
981 };
982 #endif
983
984 /*
985  * iwl_switch_rxon: "channel switch" structure
986  *
987  * @ switch_in_progress: channel switch in progress
988  * @ channel: new channel
989  */
990 struct iwl_switch_rxon {
991         bool switch_in_progress;
992         __le16 channel;
993 };
994
995 struct iwl_priv {
996
997         /* ieee device used by generic ieee processing code */
998         struct ieee80211_hw *hw;
999         struct ieee80211_channel *ieee_channels;
1000         struct ieee80211_rate *ieee_rates;
1001         struct iwl_cfg *cfg;
1002
1003         /* temporary frame storage list */
1004         struct list_head free_frames;
1005         int frames_count;
1006
1007         enum ieee80211_band band;
1008         int alloc_rxb_page;
1009
1010         void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
1011                                        struct iwl_rx_mem_buffer *rxb);
1012
1013         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
1014
1015 #if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
1016         /* spectrum measurement report caching */
1017         struct iwl_spectrum_notification measure_report;
1018         u8 measurement_status;
1019 #endif
1020         /* ucode beacon time */
1021         u32 ucode_beacon_time;
1022
1023         /* we allocate array of iwl4965_channel_info for NIC's valid channels.
1024          *    Access via channel # using indirect index array */
1025         struct iwl_channel_info *channel_info;  /* channel info array */
1026         u8 channel_count;       /* # of channels */
1027
1028         /* each calibration channel group in the EEPROM has a derived
1029          * clip setting for each rate. 3945 only.*/
1030         const struct iwl3945_clip_group clip39_groups[5];
1031
1032         /* thermal calibration */
1033         s32 temperature;        /* degrees Kelvin */
1034         s32 last_temperature;
1035
1036         /* init calibration results */
1037         struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1038
1039         /* Scan related variables */
1040         unsigned long last_scan_jiffies;
1041         unsigned long next_scan_jiffies;
1042         unsigned long scan_start;
1043         unsigned long scan_pass_start;
1044         unsigned long scan_start_tsf;
1045         void *scan;
1046         int scan_bands;
1047         struct cfg80211_scan_request *scan_request;
1048         u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1049         u8 mgmt_tx_ant;
1050
1051         /* spinlock */
1052         spinlock_t lock;        /* protect general shared data */
1053         spinlock_t hcmd_lock;   /* protect hcmd */
1054         spinlock_t reg_lock;    /* protect hw register access */
1055         struct mutex mutex;
1056
1057         /* basic pci-network driver stuff */
1058         struct pci_dev *pci_dev;
1059
1060         /* pci hardware address support */
1061         void __iomem *hw_base;
1062         u32  hw_rev;
1063         u32  hw_wa_rev;
1064         u8   rev_id;
1065
1066         /* uCode images, save to reload in case of failure */
1067         u32 ucode_ver;                  /* version of ucode, copy of
1068                                            iwl_ucode.ver */
1069         struct fw_desc ucode_code;      /* runtime inst */
1070         struct fw_desc ucode_data;      /* runtime data original */
1071         struct fw_desc ucode_data_backup;       /* runtime data save/restore */
1072         struct fw_desc ucode_init;      /* initialization inst */
1073         struct fw_desc ucode_init_data; /* initialization data */
1074         struct fw_desc ucode_boot;      /* bootstrap inst */
1075         enum ucode_type ucode_type;
1076         u8 ucode_write_complete;        /* the image write is complete */
1077
1078
1079         struct iwl_rxon_time_cmd rxon_timing;
1080
1081         /* We declare this const so it can only be
1082          * changed via explicit cast within the
1083          * routines that actually update the physical
1084          * hardware */
1085         const struct iwl_rxon_cmd active_rxon;
1086         struct iwl_rxon_cmd staging_rxon;
1087
1088         struct iwl_switch_rxon switch_rxon;
1089
1090         /* 1st responses from initialize and runtime uCode images.
1091          * 4965's initialize alive response contains some calibration data. */
1092         struct iwl_init_alive_resp card_alive_init;
1093         struct iwl_alive_resp card_alive;
1094
1095         unsigned long last_blink_time;
1096         u8 last_blink_rate;
1097         u8 allow_blinking;
1098         u64 led_tpt;
1099
1100         u16 active_rate;
1101         u16 active_rate_basic;
1102
1103         u8 assoc_station_added;
1104         u8 start_calib;
1105         struct iwl_sensitivity_data sensitivity_data;
1106         struct iwl_chain_noise_data chain_noise_data;
1107         __le16 sensitivity_tbl[HD_TABLE_SIZE];
1108
1109         struct iwl_ht_config current_ht_config;
1110         u8 last_phy_res[100];
1111
1112         /* Rate scaling data */
1113         u8 retry_rate;
1114
1115         wait_queue_head_t wait_command_queue;
1116
1117         int activity_timer_active;
1118
1119         /* Rx and Tx DMA processing queues */
1120         struct iwl_rx_queue rxq;
1121         struct iwl_tx_queue *txq;
1122         unsigned long txq_ctx_active_msk;
1123         struct iwl_dma_ptr  kw; /* keep warm address */
1124         struct iwl_dma_ptr  scd_bc_tbls;
1125
1126         u32 scd_base_addr;      /* scheduler sram base address */
1127
1128         unsigned long status;
1129
1130         int last_rx_rssi;       /* From Rx packet statistics */
1131         int last_rx_noise;      /* From beacon statistics */
1132
1133         /* counts mgmt, ctl, and data packets */
1134         struct traffic_stats tx_stats;
1135         struct traffic_stats rx_stats;
1136
1137         /* counts interrupts */
1138         struct isr_statistics isr_stats;
1139
1140         struct iwl_power_mgr power_data;
1141         struct iwl_tt_mgmt thermal_throttle;
1142
1143         struct iwl_notif_statistics statistics;
1144 #ifdef CONFIG_IWLWIFI_DEBUG
1145         struct iwl_notif_statistics accum_statistics;
1146 #endif
1147
1148         /* context information */
1149         u16 rates_mask;
1150
1151         u8 bssid[ETH_ALEN];
1152         u16 rts_threshold;
1153         u8 mac_addr[ETH_ALEN];
1154
1155         /*station table variables */
1156         spinlock_t sta_lock;
1157         int num_stations;
1158         struct iwl_station_entry stations[IWL_STATION_COUNT];
1159         struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1160         u8 default_wep_key;
1161         u8 key_mapping_key;
1162         unsigned long ucode_key_table;
1163
1164         /* queue refcounts */
1165 #define IWL_MAX_HW_QUEUES       32
1166         unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1167         /* for each AC */
1168         atomic_t queue_stop_count[4];
1169
1170         /* Indication if ieee80211_ops->open has been called */
1171         u8 is_open;
1172
1173         u8 mac80211_registered;
1174
1175         /* Rx'd packet timing information */
1176         u32 last_beacon_time;
1177         u64 last_tsf;
1178
1179         /* eeprom */
1180         u8 *eeprom;
1181         int    nvm_device_type;
1182         struct iwl_eeprom_calib_info *calib_info;
1183
1184         enum nl80211_iftype iw_mode;
1185
1186         struct sk_buff *ibss_beacon;
1187
1188         /* Last Rx'd beacon timestamp */
1189         u64 timestamp;
1190         u16 beacon_int;
1191         struct ieee80211_vif *vif;
1192
1193         /*Added for 3945 */
1194         void *shared_virt;
1195         dma_addr_t shared_phys;
1196         /*End*/
1197         struct iwl_hw_params hw_params;
1198
1199         /* INT ICT Table */
1200         __le32 *ict_tbl;
1201         dma_addr_t ict_tbl_dma;
1202         dma_addr_t aligned_ict_tbl_dma;
1203         int ict_index;
1204         void *ict_tbl_vir;
1205         u32 inta;
1206         bool use_ict;
1207
1208         u32 inta_mask;
1209         /* Current association information needed to configure the
1210          * hardware */
1211         u16 assoc_id;
1212         u16 assoc_capability;
1213
1214         struct iwl_qos_info qos_data;
1215
1216         struct workqueue_struct *workqueue;
1217
1218         struct work_struct up;
1219         struct work_struct restart;
1220         struct work_struct calibrated_work;
1221         struct work_struct scan_completed;
1222         struct work_struct rx_replenish;
1223         struct work_struct abort_scan;
1224         struct work_struct update_link_led;
1225         struct work_struct auth_work;
1226         struct work_struct report_work;
1227         struct work_struct request_scan;
1228         struct work_struct beacon_update;
1229         struct work_struct tt_work;
1230         struct work_struct ct_enter;
1231         struct work_struct ct_exit;
1232
1233         struct tasklet_struct irq_tasklet;
1234
1235         struct delayed_work init_alive_start;
1236         struct delayed_work alive_start;
1237         struct delayed_work scan_check;
1238
1239         /*For 3945 only*/
1240         struct delayed_work thermal_periodic;
1241         struct delayed_work rfkill_poll;
1242
1243         /* TX Power */
1244         s8 tx_power_user_lmt;
1245         s8 tx_power_device_lmt;
1246         s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
1247
1248
1249 #ifdef CONFIG_IWLWIFI_DEBUG
1250         /* debugging info */
1251         u32 debug_level; /* per device debugging will override global
1252                             iwl_debug_level if set */
1253         u32 framecnt_to_us;
1254         atomic_t restrict_refcnt;
1255         bool disable_ht40;
1256 #ifdef CONFIG_IWLWIFI_DEBUGFS
1257         /* debugfs */
1258         u16 tx_traffic_idx;
1259         u16 rx_traffic_idx;
1260         u8 *tx_traffic;
1261         u8 *rx_traffic;
1262         struct iwl_debugfs *dbgfs;
1263 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1264 #endif /* CONFIG_IWLWIFI_DEBUG */
1265
1266         struct work_struct txpower_work;
1267         u32 disable_sens_cal;
1268         u32 disable_chain_noise_cal;
1269         u32 disable_tx_power_cal;
1270         struct work_struct run_time_calib_work;
1271         struct timer_list statistics_periodic;
1272         bool hw_ready;
1273         /*For 3945*/
1274 #define IWL_DEFAULT_TX_POWER 0x0F
1275
1276         struct iwl3945_notif_statistics statistics_39;
1277
1278         u32 sta_supp_rates;
1279 }; /*iwl_priv */
1280
1281 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1282 {
1283         set_bit(txq_id, &priv->txq_ctx_active_msk);
1284 }
1285
1286 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1287 {
1288         clear_bit(txq_id, &priv->txq_ctx_active_msk);
1289 }
1290
1291 #ifdef CONFIG_IWLWIFI_DEBUG
1292 const char *iwl_get_tx_fail_reason(u32 status);
1293 /*
1294  * iwl_get_debug_level: Return active debug level for device
1295  *
1296  * Using sysfs it is possible to set per device debug level. This debug
1297  * level will be used if set, otherwise the global debug level which can be
1298  * set via module parameter is used.
1299  */
1300 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1301 {
1302         if (priv->debug_level)
1303                 return priv->debug_level;
1304         else
1305                 return iwl_debug_level;
1306 }
1307 #else
1308 static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
1309
1310 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1311 {
1312         return iwl_debug_level;
1313 }
1314 #endif
1315
1316
1317 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1318                                                          int txq_id, int idx)
1319 {
1320         if (priv->txq[txq_id].txb[idx].skb[0])
1321                 return (struct ieee80211_hdr *)priv->txq[txq_id].
1322                                 txb[idx].skb[0]->data;
1323         return NULL;
1324 }
1325
1326
1327 static inline int iwl_is_associated(struct iwl_priv *priv)
1328 {
1329         return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1330 }
1331
1332 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1333 {
1334         if (ch_info == NULL)
1335                 return 0;
1336         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1337 }
1338
1339 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1340 {
1341         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1342 }
1343
1344 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1345 {
1346         return ch_info->band == IEEE80211_BAND_5GHZ;
1347 }
1348
1349 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1350 {
1351         return ch_info->band == IEEE80211_BAND_2GHZ;
1352 }
1353
1354 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1355 {
1356         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1357 }
1358
1359 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1360 {
1361         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1362 }
1363
1364 #endif                          /* __iwl_dev_h__ */