]> git.karo-electronics.de Git - mv-sheeva.git/blob - drivers/net/wireless/iwlwifi/iwl-dev.h
iwlwifi: drop non-production PCI-IDs for 6x50 series
[mv-sheeva.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 /*
27  * Please use this file (iwl-dev.h) for driver implementation definitions.
28  * Please use iwl-commands.h for uCode API definitions.
29  * Please use iwl-4965-hw.h for hardware-related definitions.
30  */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49
50 /* configuration for the iwl4965 */
51 extern struct iwl_cfg iwl4965_agn_cfg;
52 extern struct iwl_cfg iwl5300_agn_cfg;
53 extern struct iwl_cfg iwl5100_agn_cfg;
54 extern struct iwl_cfg iwl5350_agn_cfg;
55 extern struct iwl_cfg iwl5100_bg_cfg;
56 extern struct iwl_cfg iwl5100_abg_cfg;
57 extern struct iwl_cfg iwl5150_agn_cfg;
58 extern struct iwl_cfg iwl6000h_2agn_cfg;
59 extern struct iwl_cfg iwl6000h_2abg_cfg;
60 extern struct iwl_cfg iwl6000h_2bg_cfg;
61 extern struct iwl_cfg iwl6000i_2agn_cfg;
62 extern struct iwl_cfg iwl6000i_2abg_cfg;
63 extern struct iwl_cfg iwl6000i_2bg_cfg;
64 extern struct iwl_cfg iwl6000_3agn_cfg;
65 extern struct iwl_cfg iwl6050_2agn_cfg;
66 extern struct iwl_cfg iwl6050_2abg_cfg;
67 extern struct iwl_cfg iwl1000_bgn_cfg;
68 extern struct iwl_cfg iwl1000_bg_cfg;
69
70 struct iwl_tx_queue;
71
72 /* shared structures from iwl-5000.c */
73 extern struct iwl_mod_params iwl50_mod_params;
74 extern struct iwl_ucode_ops iwl5000_ucode;
75 extern struct iwl_lib_ops iwl5000_lib;
76 extern struct iwl_hcmd_ops iwl5000_hcmd;
77 extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
78
79 /* shared functions from iwl-5000.c */
80 extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
81 extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
82                                      u8 *data);
83 extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
84                                     __le32 *tx_flags);
85 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
86                              struct iwl_rx_phy_res *rx_resp);
87 extern void iwl5000_nic_config(struct iwl_priv *priv);
88 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
89 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
90                                     size_t offset);
91 extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
92                                             struct iwl_tx_queue *txq,
93                                             u16 byte_cnt);
94 extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
95                                     struct iwl_tx_queue *txq);
96 extern int iwl5000_load_ucode(struct iwl_priv *priv);
97 extern void iwl5000_init_alive_start(struct iwl_priv *priv);
98 extern int iwl5000_alive_notify(struct iwl_priv *priv);
99 extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
100 extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
101                            int tx_fifo, int sta_id, int tid, u16 ssn_idx);
102 extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
103                             u16 ssn_idx, u8 tx_fifo);
104 extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
105 extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
106 extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
107 extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
108 extern int iwl5000_send_tx_power(struct iwl_priv *priv);
109 extern void iwl5000_temperature(struct iwl_priv *priv);
110
111 /* CT-KILL constants */
112 #define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
113 #define CT_KILL_THRESHOLD          114 /* in Celsius */
114 #define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
115
116 /* Default noise level to report when noise measurement is not available.
117  *   This may be because we're:
118  *   1)  Not associated (4965, no beacon statistics being sent to driver)
119  *   2)  Scanning (noise measurement does not apply to associated channel)
120  *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
121  * Use default noise value of -127 ... this is below the range of measurable
122  *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
123  *   Also, -127 works better than 0 when averaging frames with/without
124  *   noise info (e.g. averaging might be done in app); measured dBm values are
125  *   always negative ... using a negative value as the default keeps all
126  *   averages within an s8's (used in some apps) range of negative values. */
127 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
128
129 /*
130  * RTS threshold here is total size [2347] minus 4 FCS bytes
131  * Per spec:
132  *   a value of 0 means RTS on all data/management packets
133  *   a value > max MSDU size means no RTS
134  * else RTS for data/management frames where MPDU is larger
135  *   than RTS value.
136  */
137 #define DEFAULT_RTS_THRESHOLD     2347U
138 #define MIN_RTS_THRESHOLD         0U
139 #define MAX_RTS_THRESHOLD         2347U
140 #define MAX_MSDU_SIZE             2304U
141 #define MAX_MPDU_SIZE             2346U
142 #define DEFAULT_BEACON_INTERVAL   100U
143 #define DEFAULT_SHORT_RETRY_LIMIT 7U
144 #define DEFAULT_LONG_RETRY_LIMIT  4U
145
146 struct iwl_rx_mem_buffer {
147         dma_addr_t page_dma;
148         struct page *page;
149         struct list_head list;
150 };
151
152 #define rxb_addr(r) page_address(r->page)
153
154 /* defined below */
155 struct iwl_device_cmd;
156
157 struct iwl_cmd_meta {
158         /* only for SYNC commands, iff the reply skb is wanted */
159         struct iwl_host_cmd *source;
160         /*
161          * only for ASYNC commands
162          * (which is somewhat stupid -- look at iwl-sta.c for instance
163          * which duplicates a bunch of code because the callback isn't
164          * invoked for SYNC commands, if it were and its result passed
165          * through it would be simpler...)
166          */
167         void (*callback)(struct iwl_priv *priv,
168                          struct iwl_device_cmd *cmd,
169                          struct iwl_rx_packet *pkt);
170
171         /* The CMD_SIZE_HUGE flag bit indicates that the command
172          * structure is stored at the end of the shared queue memory. */
173         u32 flags;
174
175         DECLARE_PCI_UNMAP_ADDR(mapping)
176         DECLARE_PCI_UNMAP_LEN(len)
177 };
178
179 /*
180  * Generic queue structure
181  *
182  * Contains common data for Rx and Tx queues
183  */
184 struct iwl_queue {
185         int n_bd;              /* number of BDs in this queue */
186         int write_ptr;       /* 1-st empty entry (index) host_w*/
187         int read_ptr;         /* last used entry (index) host_r*/
188         dma_addr_t dma_addr;   /* physical addr for BD's */
189         int n_window;          /* safe queue window */
190         u32 id;
191         int low_mark;          /* low watermark, resume queue if free
192                                 * space more than this */
193         int high_mark;         /* high watermark, stop queue if free
194                                 * space less than this */
195 } __attribute__ ((packed));
196
197 /* One for each TFD */
198 struct iwl_tx_info {
199         struct sk_buff *skb[IWL_NUM_OF_TBS - 1];
200 };
201
202 /**
203  * struct iwl_tx_queue - Tx Queue for DMA
204  * @q: generic Rx/Tx queue descriptor
205  * @bd: base of circular buffer of TFDs
206  * @cmd: array of command/TX buffer pointers
207  * @meta: array of meta data for each command/tx buffer
208  * @dma_addr_cmd: physical address of cmd/tx buffer array
209  * @txb: array of per-TFD driver data
210  * @need_update: indicates need to update read/write index
211  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
212  *
213  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
214  * descriptors) and required locking structures.
215  */
216 #define TFD_TX_CMD_SLOTS 256
217 #define TFD_CMD_SLOTS 32
218
219 struct iwl_tx_queue {
220         struct iwl_queue q;
221         void *tfds;
222         struct iwl_device_cmd **cmd;
223         struct iwl_cmd_meta *meta;
224         struct iwl_tx_info *txb;
225         u8 need_update;
226         u8 sched_retry;
227         u8 active;
228         u8 swq_id;
229 };
230
231 #define IWL_NUM_SCAN_RATES         (2)
232
233 struct iwl4965_channel_tgd_info {
234         u8 type;
235         s8 max_power;
236 };
237
238 struct iwl4965_channel_tgh_info {
239         s64 last_radar_time;
240 };
241
242 #define IWL4965_MAX_RATE (33)
243
244 struct iwl3945_clip_group {
245         /* maximum power level to prevent clipping for each rate, derived by
246          *   us from this band's saturation power in EEPROM */
247         const s8 clip_powers[IWL_MAX_RATES];
248 };
249
250 /* current Tx power values to use, one for each rate for each channel.
251  * requested power is limited by:
252  * -- regulatory EEPROM limits for this channel
253  * -- hardware capabilities (clip-powers)
254  * -- spectrum management
255  * -- user preference (e.g. iwconfig)
256  * when requested power is set, base power index must also be set. */
257 struct iwl3945_channel_power_info {
258         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
259         s8 power_table_index;   /* actual (compenst'd) index into gain table */
260         s8 base_power_index;    /* gain index for power at factory temp. */
261         s8 requested_power;     /* power (dBm) requested for this chnl/rate */
262 };
263
264 /* current scan Tx power values to use, one for each scan rate for each
265  * channel. */
266 struct iwl3945_scan_power_info {
267         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
268         s8 power_table_index;   /* actual (compenst'd) index into gain table */
269         s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
270 };
271
272 /*
273  * One for each channel, holds all channel setup data
274  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
275  *     with one another!
276  */
277 struct iwl_channel_info {
278         struct iwl4965_channel_tgd_info tgd;
279         struct iwl4965_channel_tgh_info tgh;
280         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
281         struct iwl_eeprom_channel ht40_eeprom;  /* EEPROM regulatory limit for
282                                                  * HT40 channel */
283
284         u8 channel;       /* channel number */
285         u8 flags;         /* flags copied from EEPROM */
286         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
287         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) limit */
288         s8 min_power;     /* always 0 */
289         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
290
291         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
292         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
293         enum ieee80211_band band;
294
295         /* HT40 channel info */
296         s8 ht40_max_power_avg;  /* (dBm) regul. eeprom, normal Tx, any rate */
297         u8 ht40_flags;          /* flags copied from EEPROM */
298         u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
299
300         /* Radio/DSP gain settings for each "normal" data Tx rate.
301          * These include, in addition to RF and DSP gain, a few fields for
302          *   remembering/modifying gain settings (indexes). */
303         struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
304
305         /* Radio/DSP gain settings for each scan rate, for directed scans. */
306         struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
307 };
308
309 #define IWL_TX_FIFO_AC0 0
310 #define IWL_TX_FIFO_AC1 1
311 #define IWL_TX_FIFO_AC2 2
312 #define IWL_TX_FIFO_AC3 3
313 #define IWL_TX_FIFO_HCCA_1      5
314 #define IWL_TX_FIFO_HCCA_2      6
315 #define IWL_TX_FIFO_NONE        7
316
317 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
318  * Set the minimum to accommodate the 4 standard TX queues, 1 command
319  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
320 #define IWL_MIN_NUM_QUEUES      10
321
322 /*
323  * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00,
324  * the driver maps it into the appropriate device FIFO for the
325  * uCode.
326  */
327 #define IWL_CMD_QUEUE_NUM       4
328
329 /* Power management (not Tx power) structures */
330
331 enum iwl_pwr_src {
332         IWL_PWR_SRC_VMAIN,
333         IWL_PWR_SRC_VAUX,
334 };
335
336 #define IEEE80211_DATA_LEN              2304
337 #define IEEE80211_4ADDR_LEN             30
338 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
339 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
340
341 struct iwl_frame {
342         union {
343                 struct ieee80211_hdr frame;
344                 struct iwl_tx_beacon_cmd beacon;
345                 u8 raw[IEEE80211_FRAME_LEN];
346                 u8 cmd[360];
347         } u;
348         struct list_head list;
349 };
350
351 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
352 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
353 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
354
355 enum {
356         CMD_SYNC = 0,
357         CMD_SIZE_NORMAL = 0,
358         CMD_NO_SKB = 0,
359         CMD_SIZE_HUGE = (1 << 0),
360         CMD_ASYNC = (1 << 1),
361         CMD_WANT_SKB = (1 << 2),
362 };
363
364 #define DEF_CMD_PAYLOAD_SIZE 320
365
366 /*
367  * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header,
368  * SNAP header and alignment. It should also be big enough for 802.11
369  * control frames.
370  */
371 #define IWL_LINK_HDR_MAX 64
372
373 /**
374  * struct iwl_device_cmd
375  *
376  * For allocation of the command and tx queues, this establishes the overall
377  * size of the largest command we send to uCode, except for a scan command
378  * (which is relatively huge; space is allocated separately).
379  */
380 struct iwl_device_cmd {
381         struct iwl_cmd_header hdr;      /* uCode API */
382         union {
383                 u32 flags;
384                 u8 val8;
385                 u16 val16;
386                 u32 val32;
387                 struct iwl_tx_cmd tx;
388                 struct iwl6000_channel_switch_cmd chswitch;
389                 u8 payload[DEF_CMD_PAYLOAD_SIZE];
390         } __attribute__ ((packed)) cmd;
391 } __attribute__ ((packed));
392
393 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
394
395
396 struct iwl_host_cmd {
397         const void *data;
398         unsigned long reply_page;
399         void (*callback)(struct iwl_priv *priv,
400                          struct iwl_device_cmd *cmd,
401                          struct iwl_rx_packet *pkt);
402         u32 flags;
403         u16 len;
404         u8 id;
405 };
406
407 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
408 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
409 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
410
411 /**
412  * struct iwl_rx_queue - Rx queue
413  * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
414  * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
415  * @read: Shared index to newest available Rx buffer
416  * @write: Shared index to oldest written Rx packet
417  * @free_count: Number of pre-allocated buffers in rx_free
418  * @rx_free: list of free SKBs for use
419  * @rx_used: List of Rx buffers with no SKB
420  * @need_update: flag to indicate we need to update read/write index
421  * @rb_stts: driver's pointer to receive buffer status
422  * @rb_stts_dma: bus address of receive buffer status
423  *
424  * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
425  */
426 struct iwl_rx_queue {
427         __le32 *bd;
428         dma_addr_t dma_addr;
429         struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
430         struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
431         u32 read;
432         u32 write;
433         u32 free_count;
434         u32 write_actual;
435         struct list_head rx_free;
436         struct list_head rx_used;
437         int need_update;
438         struct iwl_rb_status *rb_stts;
439         dma_addr_t rb_stts_dma;
440         spinlock_t lock;
441 };
442
443 #define IWL_SUPPORTED_RATES_IE_LEN         8
444
445 #define MAX_TID_COUNT        9
446
447 #define IWL_INVALID_RATE     0xFF
448 #define IWL_INVALID_VALUE    -1
449
450 /**
451  * struct iwl_ht_agg -- aggregation status while waiting for block-ack
452  * @txq_id: Tx queue used for Tx attempt
453  * @frame_count: # frames attempted by Tx command
454  * @wait_for_ba: Expect block-ack before next Tx reply
455  * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
456  * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
457  * @bitmap1: High order, one bit for each frame pending ACK in Tx window
458  * @rate_n_flags: Rate at which Tx was attempted
459  *
460  * If REPLY_TX indicates that aggregation was attempted, driver must wait
461  * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
462  * until block ack arrives.
463  */
464 struct iwl_ht_agg {
465         u16 txq_id;
466         u16 frame_count;
467         u16 wait_for_ba;
468         u16 start_idx;
469         u64 bitmap;
470         u32 rate_n_flags;
471 #define IWL_AGG_OFF 0
472 #define IWL_AGG_ON 1
473 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
474 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
475         u8 state;
476 };
477
478
479 struct iwl_tid_data {
480         u16 seq_number;
481         u16 tfds_in_queue;
482         struct iwl_ht_agg agg;
483 };
484
485 struct iwl_hw_key {
486         enum ieee80211_key_alg alg;
487         int keylen;
488         u8 keyidx;
489         u8 key[32];
490 };
491
492 union iwl_ht_rate_supp {
493         u16 rates;
494         struct {
495                 u8 siso_rate;
496                 u8 mimo_rate;
497         };
498 };
499
500 #define CFG_HT_RX_AMPDU_FACTOR_DEF  (0x3)
501
502 /*
503  * Maximal MPDU density for TX aggregation
504  * 4 - 2us density
505  * 5 - 4us density
506  * 6 - 8us density
507  * 7 - 16us density
508  */
509 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
510 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
511
512 struct iwl_ht_config {
513         /* self configuration data */
514         bool is_ht;
515         bool is_40mhz;
516         bool single_chain_sufficient;
517         u8 sm_ps;
518         /* BSS related data */
519         u8 extension_chan_offset;
520         u8 ht_protection;
521         u8 non_GF_STA_present;
522 };
523
524 union iwl_qos_capabity {
525         struct {
526                 u8 edca_count:4;        /* bit 0-3 */
527                 u8 q_ack:1;             /* bit 4 */
528                 u8 queue_request:1;     /* bit 5 */
529                 u8 txop_request:1;      /* bit 6 */
530                 u8 reserved:1;          /* bit 7 */
531         } q_AP;
532         struct {
533                 u8 acvo_APSD:1;         /* bit 0 */
534                 u8 acvi_APSD:1;         /* bit 1 */
535                 u8 ac_bk_APSD:1;        /* bit 2 */
536                 u8 ac_be_APSD:1;        /* bit 3 */
537                 u8 q_ack:1;             /* bit 4 */
538                 u8 max_len:2;           /* bit 5-6 */
539                 u8 more_data_ack:1;     /* bit 7 */
540         } q_STA;
541         u8 val;
542 };
543
544 /* QoS structures */
545 struct iwl_qos_info {
546         int qos_active;
547         union iwl_qos_capabity qos_cap;
548         struct iwl_qosparam_cmd def_qos_parm;
549 };
550
551 #define STA_PS_STATUS_WAKE             0
552 #define STA_PS_STATUS_SLEEP            1
553
554
555 struct iwl3945_station_entry {
556         struct iwl3945_addsta_cmd sta;
557         struct iwl_tid_data tid[MAX_TID_COUNT];
558         u8 used;
559         u8 ps_status;
560         struct iwl_hw_key keyinfo;
561 };
562
563 struct iwl_station_entry {
564         struct iwl_addsta_cmd sta;
565         struct iwl_tid_data tid[MAX_TID_COUNT];
566         u8 used;
567         u8 ps_status;
568         struct iwl_hw_key keyinfo;
569 };
570
571 /*
572  * iwl_station_priv: Driver's private station information
573  *
574  * When mac80211 creates a station it reserves some space (hw->sta_data_size)
575  * in the structure for use by driver. This structure is places in that
576  * space.
577  *
578  * At the moment use it for the station's rate scaling information.
579  */
580 struct iwl_station_priv {
581         struct iwl_lq_sta lq_sta;
582 };
583
584 /* one for each uCode image (inst/data, boot/init/runtime) */
585 struct fw_desc {
586         void *v_addr;           /* access by driver */
587         dma_addr_t p_addr;      /* access by card's busmaster DMA */
588         u32 len;                /* bytes */
589 };
590
591 /* uCode file layout */
592 struct iwl_ucode_header {
593         __le32 ver;     /* major/minor/API/serial */
594         union {
595                 struct {
596                         __le32 inst_size;       /* bytes of runtime code */
597                         __le32 data_size;       /* bytes of runtime data */
598                         __le32 init_size;       /* bytes of init code */
599                         __le32 init_data_size;  /* bytes of init data */
600                         __le32 boot_size;       /* bytes of bootstrap code */
601                         u8 data[0];             /* in same order as sizes */
602                 } v1;
603                 struct {
604                         __le32 build;           /* build number */
605                         __le32 inst_size;       /* bytes of runtime code */
606                         __le32 data_size;       /* bytes of runtime data */
607                         __le32 init_size;       /* bytes of init code */
608                         __le32 init_data_size;  /* bytes of init data */
609                         __le32 boot_size;       /* bytes of bootstrap code */
610                         u8 data[0];             /* in same order as sizes */
611                 } v2;
612         } u;
613 };
614 #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
615
616 struct iwl4965_ibss_seq {
617         u8 mac[ETH_ALEN];
618         u16 seq_num;
619         u16 frag_num;
620         unsigned long packet_time;
621         struct list_head list;
622 };
623
624 struct iwl_sensitivity_ranges {
625         u16 min_nrg_cck;
626         u16 max_nrg_cck;
627
628         u16 nrg_th_cck;
629         u16 nrg_th_ofdm;
630
631         u16 auto_corr_min_ofdm;
632         u16 auto_corr_min_ofdm_mrc;
633         u16 auto_corr_min_ofdm_x1;
634         u16 auto_corr_min_ofdm_mrc_x1;
635
636         u16 auto_corr_max_ofdm;
637         u16 auto_corr_max_ofdm_mrc;
638         u16 auto_corr_max_ofdm_x1;
639         u16 auto_corr_max_ofdm_mrc_x1;
640
641         u16 auto_corr_max_cck;
642         u16 auto_corr_max_cck_mrc;
643         u16 auto_corr_min_cck;
644         u16 auto_corr_min_cck_mrc;
645
646         u16 barker_corr_th_min;
647         u16 barker_corr_th_min_mrc;
648         u16 nrg_th_cca;
649 };
650
651
652 #define KELVIN_TO_CELSIUS(x) ((x)-273)
653 #define CELSIUS_TO_KELVIN(x) ((x)+273)
654
655
656 /**
657  * struct iwl_hw_params
658  * @max_txq_num: Max # Tx queues supported
659  * @dma_chnl_num: Number of Tx DMA/FIFO channels
660  * @scd_bc_tbls_size: size of scheduler byte count tables
661  * @tfd_size: TFD size
662  * @tx/rx_chains_num: Number of TX/RX chains
663  * @valid_tx/rx_ant: usable antennas
664  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
665  * @max_rxq_log: Log-base-2 of max_rxq_size
666  * @rx_page_order: Rx buffer page order
667  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
668  * @max_stations:
669  * @bcast_sta_id:
670  * @ht40_channel: is 40MHz width possible in band 2.4
671  * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
672  * @sw_crypto: 0 for hw, 1 for sw
673  * @max_xxx_size: for ucode uses
674  * @ct_kill_threshold: temperature threshold
675  * @calib_init_cfg: setup initial calibrations for the hw
676  * @struct iwl_sensitivity_ranges: range of sensitivity values
677  */
678 struct iwl_hw_params {
679         u8 max_txq_num;
680         u8 dma_chnl_num;
681         u16 scd_bc_tbls_size;
682         u32 tfd_size;
683         u8  tx_chains_num;
684         u8  rx_chains_num;
685         u8  valid_tx_ant;
686         u8  valid_rx_ant;
687         u16 max_rxq_size;
688         u16 max_rxq_log;
689         u32 rx_page_order;
690         u32 rx_wrt_ptr_reg;
691         u8  max_stations;
692         u8  bcast_sta_id;
693         u8  ht40_channel;
694         u8  max_beacon_itrvl;   /* in 1024 ms */
695         u32 max_inst_size;
696         u32 max_data_size;
697         u32 max_bsm_size;
698         u32 ct_kill_threshold; /* value in hw-dependent units */
699         u32 ct_kill_exit_threshold; /* value in hw-dependent units */
700                                     /* for 1000, 6000 series and up */
701         u32 calib_init_cfg;
702         const struct iwl_sensitivity_ranges *sens;
703 };
704
705
706 /******************************************************************************
707  *
708  * Functions implemented in core module which are forward declared here
709  * for use by iwl-[4-5].c
710  *
711  * NOTE:  The implementation of these functions are not hardware specific
712  * which is why they are in the core module files.
713  *
714  * Naming convention --
715  * iwl_         <-- Is part of iwlwifi
716  * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
717  * iwl4965_bg_      <-- Called from work queue context
718  * iwl4965_mac_     <-- mac80211 callback
719  *
720  ****************************************************************************/
721 extern void iwl_update_chain_flags(struct iwl_priv *priv);
722 extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
723 extern const u8 iwl_bcast_addr[ETH_ALEN];
724 extern int iwl_rxq_stop(struct iwl_priv *priv);
725 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
726 extern int iwl_queue_space(const struct iwl_queue *q);
727 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
728 {
729         return q->write_ptr > q->read_ptr ?
730                 (i >= q->read_ptr && i < q->write_ptr) :
731                 !(i < q->read_ptr && i >= q->write_ptr);
732 }
733
734
735 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
736 {
737         /*
738          * This is for init calibration result and scan command which
739          * required buffer > TFD_MAX_PAYLOAD_SIZE,
740          * the big buffer at end of command array
741          */
742         if (is_huge)
743                 return q->n_window;     /* must be power of 2 */
744
745         /* Otherwise, use normal size buffers */
746         return index & (q->n_window - 1);
747 }
748
749
750 struct iwl_dma_ptr {
751         dma_addr_t dma;
752         void *addr;
753         size_t size;
754 };
755
756 #define IWL_OPERATION_MODE_AUTO     0
757 #define IWL_OPERATION_MODE_HT_ONLY  1
758 #define IWL_OPERATION_MODE_MIXED    2
759 #define IWL_OPERATION_MODE_20MHZ    3
760
761 #define IWL_TX_CRC_SIZE 4
762 #define IWL_TX_DELIMITER_SIZE 4
763
764 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
765
766 /* Sensitivity and chain noise calibration */
767 #define INITIALIZATION_VALUE            0xFFFF
768 #define IWL4965_CAL_NUM_BEACONS         20
769 #define IWL_CAL_NUM_BEACONS             16
770 #define MAXIMUM_ALLOWED_PATHLOSS        15
771
772 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
773
774 #define MAX_FA_OFDM  50
775 #define MIN_FA_OFDM  5
776 #define MAX_FA_CCK   50
777 #define MIN_FA_CCK   5
778
779 #define AUTO_CORR_STEP_OFDM       1
780
781 #define AUTO_CORR_STEP_CCK     3
782 #define AUTO_CORR_MAX_TH_CCK   160
783
784 #define NRG_DIFF               2
785 #define NRG_STEP_CCK           2
786 #define NRG_MARGIN             8
787 #define MAX_NUMBER_CCK_NO_FA 100
788
789 #define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
790
791 #define CHAIN_A             0
792 #define CHAIN_B             1
793 #define CHAIN_C             2
794 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
795 #define ALL_BAND_FILTER                 0xFF00
796 #define IN_BAND_FILTER                  0xFF
797 #define MIN_AVERAGE_NOISE_MAX_VALUE     0xFFFFFFFF
798
799 #define NRG_NUM_PREV_STAT_L     20
800 #define NUM_RX_CHAINS           3
801
802 enum iwl4965_false_alarm_state {
803         IWL_FA_TOO_MANY = 0,
804         IWL_FA_TOO_FEW = 1,
805         IWL_FA_GOOD_RANGE = 2,
806 };
807
808 enum iwl4965_chain_noise_state {
809         IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
810         IWL_CHAIN_NOISE_ACCUMULATE,
811         IWL_CHAIN_NOISE_CALIBRATED,
812         IWL_CHAIN_NOISE_DONE,
813 };
814
815 enum iwl4965_calib_enabled_state {
816         IWL_CALIB_DISABLED = 0,  /* must be 0 */
817         IWL_CALIB_ENABLED = 1,
818 };
819
820
821 /*
822  * enum iwl_calib
823  * defines the order in which results of initial calibrations
824  * should be sent to the runtime uCode
825  */
826 enum iwl_calib {
827         IWL_CALIB_XTAL,
828         IWL_CALIB_DC,
829         IWL_CALIB_LO,
830         IWL_CALIB_TX_IQ,
831         IWL_CALIB_TX_IQ_PERD,
832         IWL_CALIB_BASE_BAND,
833         IWL_CALIB_MAX
834 };
835
836 /* Opaque calibration results */
837 struct iwl_calib_result {
838         void *buf;
839         size_t buf_len;
840 };
841
842 enum ucode_type {
843         UCODE_NONE = 0,
844         UCODE_INIT,
845         UCODE_RT
846 };
847
848 /* Sensitivity calib data */
849 struct iwl_sensitivity_data {
850         u32 auto_corr_ofdm;
851         u32 auto_corr_ofdm_mrc;
852         u32 auto_corr_ofdm_x1;
853         u32 auto_corr_ofdm_mrc_x1;
854         u32 auto_corr_cck;
855         u32 auto_corr_cck_mrc;
856
857         u32 last_bad_plcp_cnt_ofdm;
858         u32 last_fa_cnt_ofdm;
859         u32 last_bad_plcp_cnt_cck;
860         u32 last_fa_cnt_cck;
861
862         u32 nrg_curr_state;
863         u32 nrg_prev_state;
864         u32 nrg_value[10];
865         u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
866         u32 nrg_silence_ref;
867         u32 nrg_energy_idx;
868         u32 nrg_silence_idx;
869         u32 nrg_th_cck;
870         s32 nrg_auto_corr_silence_diff;
871         u32 num_in_cck_no_fa;
872         u32 nrg_th_ofdm;
873
874         u16 barker_corr_th_min;
875         u16 barker_corr_th_min_mrc;
876         u16 nrg_th_cca;
877 };
878
879 /* Chain noise (differential Rx gain) calib data */
880 struct iwl_chain_noise_data {
881         u32 active_chains;
882         u32 chain_noise_a;
883         u32 chain_noise_b;
884         u32 chain_noise_c;
885         u32 chain_signal_a;
886         u32 chain_signal_b;
887         u32 chain_signal_c;
888         u16 beacon_count;
889         u8 disconn_array[NUM_RX_CHAINS];
890         u8 delta_gain_code[NUM_RX_CHAINS];
891         u8 radio_write;
892         u8 state;
893 };
894
895 #define EEPROM_SEM_TIMEOUT 10           /* milliseconds */
896 #define EEPROM_SEM_RETRY_LIMIT 1000     /* number of attempts (not time) */
897
898 #define IWL_TRAFFIC_ENTRIES     (256)
899 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
900
901 enum {
902         MEASUREMENT_READY = (1 << 0),
903         MEASUREMENT_ACTIVE = (1 << 1),
904 };
905
906 enum iwl_nvm_type {
907         NVM_DEVICE_TYPE_EEPROM = 0,
908         NVM_DEVICE_TYPE_OTP,
909 };
910
911 /*
912  * Two types of OTP memory access modes
913  *   IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
914  *                              based on physical memory addressing
915  *   IWL_OTP_ACCESS_RELATIVE - relative address mode,
916  *                             based on logical memory addressing
917  */
918 enum iwl_access_mode {
919         IWL_OTP_ACCESS_ABSOLUTE,
920         IWL_OTP_ACCESS_RELATIVE,
921 };
922
923 /**
924  * enum iwl_pa_type - Power Amplifier type
925  * @IWL_PA_SYSTEM:  based on uCode configuration
926  * @IWL_PA_INTERNAL: use Internal only
927  */
928 enum iwl_pa_type {
929         IWL_PA_SYSTEM = 0,
930         IWL_PA_INTERNAL = 1,
931 };
932
933 /* interrupt statistics */
934 struct isr_statistics {
935         u32 hw;
936         u32 sw;
937         u32 sw_err;
938         u32 sch;
939         u32 alive;
940         u32 rfkill;
941         u32 ctkill;
942         u32 wakeup;
943         u32 rx;
944         u32 rx_handlers[REPLY_MAX];
945         u32 tx;
946         u32 unhandled;
947 };
948
949 #ifdef CONFIG_IWLWIFI_DEBUGFS
950 /* management statistics */
951 enum iwl_mgmt_stats {
952         MANAGEMENT_ASSOC_REQ = 0,
953         MANAGEMENT_ASSOC_RESP,
954         MANAGEMENT_REASSOC_REQ,
955         MANAGEMENT_REASSOC_RESP,
956         MANAGEMENT_PROBE_REQ,
957         MANAGEMENT_PROBE_RESP,
958         MANAGEMENT_BEACON,
959         MANAGEMENT_ATIM,
960         MANAGEMENT_DISASSOC,
961         MANAGEMENT_AUTH,
962         MANAGEMENT_DEAUTH,
963         MANAGEMENT_ACTION,
964         MANAGEMENT_MAX,
965 };
966 /* control statistics */
967 enum iwl_ctrl_stats {
968         CONTROL_BACK_REQ =  0,
969         CONTROL_BACK,
970         CONTROL_PSPOLL,
971         CONTROL_RTS,
972         CONTROL_CTS,
973         CONTROL_ACK,
974         CONTROL_CFEND,
975         CONTROL_CFENDACK,
976         CONTROL_MAX,
977 };
978
979 struct traffic_stats {
980         u32 mgmt[MANAGEMENT_MAX];
981         u32 ctrl[CONTROL_MAX];
982         u32 data_cnt;
983         u64 data_bytes;
984 };
985 #else
986 struct traffic_stats {
987         u64 data_bytes;
988 };
989 #endif
990
991 /*
992  * iwl_switch_rxon: "channel switch" structure
993  *
994  * @ switch_in_progress: channel switch in progress
995  * @ channel: new channel
996  */
997 struct iwl_switch_rxon {
998         bool switch_in_progress;
999         __le16 channel;
1000 };
1001
1002 struct iwl_priv {
1003
1004         /* ieee device used by generic ieee processing code */
1005         struct ieee80211_hw *hw;
1006         struct ieee80211_channel *ieee_channels;
1007         struct ieee80211_rate *ieee_rates;
1008         struct iwl_cfg *cfg;
1009
1010         /* temporary frame storage list */
1011         struct list_head free_frames;
1012         int frames_count;
1013
1014         enum ieee80211_band band;
1015         int alloc_rxb_page;
1016
1017         void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
1018                                        struct iwl_rx_mem_buffer *rxb);
1019
1020         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
1021
1022 #if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
1023         /* spectrum measurement report caching */
1024         struct iwl_spectrum_notification measure_report;
1025         u8 measurement_status;
1026 #endif
1027         /* ucode beacon time */
1028         u32 ucode_beacon_time;
1029
1030         /* we allocate array of iwl4965_channel_info for NIC's valid channels.
1031          *    Access via channel # using indirect index array */
1032         struct iwl_channel_info *channel_info;  /* channel info array */
1033         u8 channel_count;       /* # of channels */
1034
1035         /* each calibration channel group in the EEPROM has a derived
1036          * clip setting for each rate. 3945 only.*/
1037         const struct iwl3945_clip_group clip39_groups[5];
1038
1039         /* thermal calibration */
1040         s32 temperature;        /* degrees Kelvin */
1041         s32 last_temperature;
1042
1043         /* init calibration results */
1044         struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1045
1046         /* Scan related variables */
1047         unsigned long last_scan_jiffies;
1048         unsigned long next_scan_jiffies;
1049         unsigned long scan_start;
1050         unsigned long scan_pass_start;
1051         unsigned long scan_start_tsf;
1052         void *scan;
1053         int scan_bands;
1054         struct cfg80211_scan_request *scan_request;
1055         u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1056         u8 mgmt_tx_ant;
1057
1058         /* spinlock */
1059         spinlock_t lock;        /* protect general shared data */
1060         spinlock_t hcmd_lock;   /* protect hcmd */
1061         spinlock_t reg_lock;    /* protect hw register access */
1062         struct mutex mutex;
1063
1064         /* basic pci-network driver stuff */
1065         struct pci_dev *pci_dev;
1066
1067         /* pci hardware address support */
1068         void __iomem *hw_base;
1069         u32  hw_rev;
1070         u32  hw_wa_rev;
1071         u8   rev_id;
1072
1073         /* uCode images, save to reload in case of failure */
1074         u32 ucode_ver;                  /* version of ucode, copy of
1075                                            iwl_ucode.ver */
1076         struct fw_desc ucode_code;      /* runtime inst */
1077         struct fw_desc ucode_data;      /* runtime data original */
1078         struct fw_desc ucode_data_backup;       /* runtime data save/restore */
1079         struct fw_desc ucode_init;      /* initialization inst */
1080         struct fw_desc ucode_init_data; /* initialization data */
1081         struct fw_desc ucode_boot;      /* bootstrap inst */
1082         enum ucode_type ucode_type;
1083         u8 ucode_write_complete;        /* the image write is complete */
1084
1085
1086         struct iwl_rxon_time_cmd rxon_timing;
1087
1088         /* We declare this const so it can only be
1089          * changed via explicit cast within the
1090          * routines that actually update the physical
1091          * hardware */
1092         const struct iwl_rxon_cmd active_rxon;
1093         struct iwl_rxon_cmd staging_rxon;
1094
1095         struct iwl_switch_rxon switch_rxon;
1096
1097         /* 1st responses from initialize and runtime uCode images.
1098          * 4965's initialize alive response contains some calibration data. */
1099         struct iwl_init_alive_resp card_alive_init;
1100         struct iwl_alive_resp card_alive;
1101
1102         unsigned long last_blink_time;
1103         u8 last_blink_rate;
1104         u8 allow_blinking;
1105         u64 led_tpt;
1106
1107         u16 active_rate;
1108         u16 active_rate_basic;
1109
1110         u8 assoc_station_added;
1111         u8 start_calib;
1112         struct iwl_sensitivity_data sensitivity_data;
1113         struct iwl_chain_noise_data chain_noise_data;
1114         __le16 sensitivity_tbl[HD_TABLE_SIZE];
1115
1116         struct iwl_ht_config current_ht_config;
1117         u8 last_phy_res[100];
1118
1119         /* Rate scaling data */
1120         u8 retry_rate;
1121
1122         wait_queue_head_t wait_command_queue;
1123
1124         int activity_timer_active;
1125
1126         /* Rx and Tx DMA processing queues */
1127         struct iwl_rx_queue rxq;
1128         struct iwl_tx_queue *txq;
1129         unsigned long txq_ctx_active_msk;
1130         struct iwl_dma_ptr  kw; /* keep warm address */
1131         struct iwl_dma_ptr  scd_bc_tbls;
1132
1133         u32 scd_base_addr;      /* scheduler sram base address */
1134
1135         unsigned long status;
1136
1137         int last_rx_rssi;       /* From Rx packet statistics */
1138         int last_rx_noise;      /* From beacon statistics */
1139
1140         /* counts mgmt, ctl, and data packets */
1141         struct traffic_stats tx_stats;
1142         struct traffic_stats rx_stats;
1143
1144         /* counts interrupts */
1145         struct isr_statistics isr_stats;
1146
1147         struct iwl_power_mgr power_data;
1148         struct iwl_tt_mgmt thermal_throttle;
1149
1150         struct iwl_notif_statistics statistics;
1151 #ifdef CONFIG_IWLWIFI_DEBUG
1152         struct iwl_notif_statistics accum_statistics;
1153 #endif
1154
1155         /* context information */
1156         u16 rates_mask;
1157
1158         u8 bssid[ETH_ALEN];
1159         u16 rts_threshold;
1160         u8 mac_addr[ETH_ALEN];
1161
1162         /*station table variables */
1163         spinlock_t sta_lock;
1164         int num_stations;
1165         struct iwl_station_entry stations[IWL_STATION_COUNT];
1166         struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1167         u8 default_wep_key;
1168         u8 key_mapping_key;
1169         unsigned long ucode_key_table;
1170
1171         /* queue refcounts */
1172 #define IWL_MAX_HW_QUEUES       32
1173         unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1174         /* for each AC */
1175         atomic_t queue_stop_count[4];
1176
1177         /* Indication if ieee80211_ops->open has been called */
1178         u8 is_open;
1179
1180         u8 mac80211_registered;
1181
1182         /* Rx'd packet timing information */
1183         u32 last_beacon_time;
1184         u64 last_tsf;
1185
1186         /* eeprom */
1187         u8 *eeprom;
1188         int    nvm_device_type;
1189         struct iwl_eeprom_calib_info *calib_info;
1190
1191         enum nl80211_iftype iw_mode;
1192
1193         struct sk_buff *ibss_beacon;
1194
1195         /* Last Rx'd beacon timestamp */
1196         u64 timestamp;
1197         u16 beacon_int;
1198         struct ieee80211_vif *vif;
1199
1200         /*Added for 3945 */
1201         void *shared_virt;
1202         dma_addr_t shared_phys;
1203         /*End*/
1204         struct iwl_hw_params hw_params;
1205
1206         /* INT ICT Table */
1207         __le32 *ict_tbl;
1208         dma_addr_t ict_tbl_dma;
1209         dma_addr_t aligned_ict_tbl_dma;
1210         int ict_index;
1211         void *ict_tbl_vir;
1212         u32 inta;
1213         bool use_ict;
1214
1215         u32 inta_mask;
1216         /* Current association information needed to configure the
1217          * hardware */
1218         u16 assoc_id;
1219         u16 assoc_capability;
1220
1221         struct iwl_qos_info qos_data;
1222
1223         struct workqueue_struct *workqueue;
1224
1225         struct work_struct up;
1226         struct work_struct restart;
1227         struct work_struct calibrated_work;
1228         struct work_struct scan_completed;
1229         struct work_struct rx_replenish;
1230         struct work_struct abort_scan;
1231         struct work_struct update_link_led;
1232         struct work_struct auth_work;
1233         struct work_struct report_work;
1234         struct work_struct request_scan;
1235         struct work_struct beacon_update;
1236         struct work_struct tt_work;
1237         struct work_struct ct_enter;
1238         struct work_struct ct_exit;
1239
1240         struct tasklet_struct irq_tasklet;
1241
1242         struct delayed_work init_alive_start;
1243         struct delayed_work alive_start;
1244         struct delayed_work scan_check;
1245
1246         /*For 3945 only*/
1247         struct delayed_work thermal_periodic;
1248         struct delayed_work rfkill_poll;
1249
1250         /* TX Power */
1251         s8 tx_power_user_lmt;
1252         s8 tx_power_device_lmt;
1253
1254
1255 #ifdef CONFIG_IWLWIFI_DEBUG
1256         /* debugging info */
1257         u32 debug_level; /* per device debugging will override global
1258                             iwl_debug_level if set */
1259         u32 framecnt_to_us;
1260         atomic_t restrict_refcnt;
1261         bool disable_ht40;
1262 #ifdef CONFIG_IWLWIFI_DEBUGFS
1263         /* debugfs */
1264         u16 tx_traffic_idx;
1265         u16 rx_traffic_idx;
1266         u8 *tx_traffic;
1267         u8 *rx_traffic;
1268         struct iwl_debugfs *dbgfs;
1269 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1270 #endif /* CONFIG_IWLWIFI_DEBUG */
1271
1272         struct work_struct txpower_work;
1273         u32 disable_sens_cal;
1274         u32 disable_chain_noise_cal;
1275         u32 disable_tx_power_cal;
1276         struct work_struct run_time_calib_work;
1277         struct timer_list statistics_periodic;
1278         bool hw_ready;
1279         /*For 3945*/
1280 #define IWL_DEFAULT_TX_POWER 0x0F
1281
1282         struct iwl3945_notif_statistics statistics_39;
1283
1284         u32 sta_supp_rates;
1285 }; /*iwl_priv */
1286
1287 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1288 {
1289         set_bit(txq_id, &priv->txq_ctx_active_msk);
1290 }
1291
1292 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1293 {
1294         clear_bit(txq_id, &priv->txq_ctx_active_msk);
1295 }
1296
1297 #ifdef CONFIG_IWLWIFI_DEBUG
1298 const char *iwl_get_tx_fail_reason(u32 status);
1299 /*
1300  * iwl_get_debug_level: Return active debug level for device
1301  *
1302  * Using sysfs it is possible to set per device debug level. This debug
1303  * level will be used if set, otherwise the global debug level which can be
1304  * set via module parameter is used.
1305  */
1306 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1307 {
1308         if (priv->debug_level)
1309                 return priv->debug_level;
1310         else
1311                 return iwl_debug_level;
1312 }
1313 #else
1314 static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
1315
1316 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1317 {
1318         return iwl_debug_level;
1319 }
1320 #endif
1321
1322
1323 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1324                                                          int txq_id, int idx)
1325 {
1326         if (priv->txq[txq_id].txb[idx].skb[0])
1327                 return (struct ieee80211_hdr *)priv->txq[txq_id].
1328                                 txb[idx].skb[0]->data;
1329         return NULL;
1330 }
1331
1332
1333 static inline int iwl_is_associated(struct iwl_priv *priv)
1334 {
1335         return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1336 }
1337
1338 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1339 {
1340         if (ch_info == NULL)
1341                 return 0;
1342         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1343 }
1344
1345 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1346 {
1347         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1348 }
1349
1350 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1351 {
1352         return ch_info->band == IEEE80211_BAND_5GHZ;
1353 }
1354
1355 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1356 {
1357         return ch_info->band == IEEE80211_BAND_2GHZ;
1358 }
1359
1360 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1361 {
1362         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1363 }
1364
1365 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1366 {
1367         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1368 }
1369
1370 #endif                          /* __iwl_dev_h__ */