]> git.karo-electronics.de Git - mv-sheeva.git/blob - drivers/net/wireless/iwlwifi/iwl-dev.h
iwlagn, iwl3945: remove apm_reset() functions
[mv-sheeva.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 /*
27  * Please use this file (iwl-dev.h) for driver implementation definitions.
28  * Please use iwl-commands.h for uCode API definitions.
29  * Please use iwl-4965-hw.h for hardware-related definitions.
30  */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49
50 /* configuration for the iwl4965 */
51 extern struct iwl_cfg iwl4965_agn_cfg;
52 extern struct iwl_cfg iwl5300_agn_cfg;
53 extern struct iwl_cfg iwl5100_agn_cfg;
54 extern struct iwl_cfg iwl5350_agn_cfg;
55 extern struct iwl_cfg iwl5100_bg_cfg;
56 extern struct iwl_cfg iwl5100_abg_cfg;
57 extern struct iwl_cfg iwl5150_agn_cfg;
58 extern struct iwl_cfg iwl6000h_2agn_cfg;
59 extern struct iwl_cfg iwl6000h_2abg_cfg;
60 extern struct iwl_cfg iwl6000h_2bg_cfg;
61 extern struct iwl_cfg iwl6000i_2agn_cfg;
62 extern struct iwl_cfg iwl6000i_2abg_cfg;
63 extern struct iwl_cfg iwl6000i_2bg_cfg;
64 extern struct iwl_cfg iwl6000_3agn_cfg;
65 extern struct iwl_cfg iwl6050_2agn_cfg;
66 extern struct iwl_cfg iwl6050_2abg_cfg;
67 extern struct iwl_cfg iwl6050_3agn_cfg;
68 extern struct iwl_cfg iwl1000_bgn_cfg;
69 extern struct iwl_cfg iwl1000_bg_cfg;
70
71 struct iwl_tx_queue;
72
73 /* shared structures from iwl-5000.c */
74 extern struct iwl_mod_params iwl50_mod_params;
75 extern struct iwl_ucode_ops iwl5000_ucode;
76 extern struct iwl_lib_ops iwl5000_lib;
77 extern struct iwl_hcmd_ops iwl5000_hcmd;
78 extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
79
80 /* shared functions from iwl-5000.c */
81 extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
82 extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
83                                      u8 *data);
84 extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
85                                     __le32 *tx_flags);
86 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
87                              struct iwl_rx_phy_res *rx_resp);
88 extern int iwl5000_apm_init(struct iwl_priv *priv);
89 extern void iwl5000_nic_config(struct iwl_priv *priv);
90 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
91 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
92                                     size_t offset);
93 extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
94                                             struct iwl_tx_queue *txq,
95                                             u16 byte_cnt);
96 extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
97                                     struct iwl_tx_queue *txq);
98 extern int iwl5000_load_ucode(struct iwl_priv *priv);
99 extern void iwl5000_init_alive_start(struct iwl_priv *priv);
100 extern int iwl5000_alive_notify(struct iwl_priv *priv);
101 extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
102 extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
103                            int tx_fifo, int sta_id, int tid, u16 ssn_idx);
104 extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
105                             u16 ssn_idx, u8 tx_fifo);
106 extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
107 extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
108 extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
109 extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
110 extern int iwl5000_send_tx_power(struct iwl_priv *priv);
111 extern void iwl5000_temperature(struct iwl_priv *priv);
112
113 /* CT-KILL constants */
114 #define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
115 #define CT_KILL_THRESHOLD          114 /* in Celsius */
116 #define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
117
118 /* Default noise level to report when noise measurement is not available.
119  *   This may be because we're:
120  *   1)  Not associated (4965, no beacon statistics being sent to driver)
121  *   2)  Scanning (noise measurement does not apply to associated channel)
122  *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
123  * Use default noise value of -127 ... this is below the range of measurable
124  *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
125  *   Also, -127 works better than 0 when averaging frames with/without
126  *   noise info (e.g. averaging might be done in app); measured dBm values are
127  *   always negative ... using a negative value as the default keeps all
128  *   averages within an s8's (used in some apps) range of negative values. */
129 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
130
131 /*
132  * RTS threshold here is total size [2347] minus 4 FCS bytes
133  * Per spec:
134  *   a value of 0 means RTS on all data/management packets
135  *   a value > max MSDU size means no RTS
136  * else RTS for data/management frames where MPDU is larger
137  *   than RTS value.
138  */
139 #define DEFAULT_RTS_THRESHOLD     2347U
140 #define MIN_RTS_THRESHOLD         0U
141 #define MAX_RTS_THRESHOLD         2347U
142 #define MAX_MSDU_SIZE             2304U
143 #define MAX_MPDU_SIZE             2346U
144 #define DEFAULT_BEACON_INTERVAL   100U
145 #define DEFAULT_SHORT_RETRY_LIMIT 7U
146 #define DEFAULT_LONG_RETRY_LIMIT  4U
147
148 struct iwl_rx_mem_buffer {
149         dma_addr_t real_dma_addr;
150         dma_addr_t aligned_dma_addr;
151         struct sk_buff *skb;
152         struct list_head list;
153 };
154
155 /* defined below */
156 struct iwl_device_cmd;
157
158 struct iwl_cmd_meta {
159         /* only for SYNC commands, iff the reply skb is wanted */
160         struct iwl_host_cmd *source;
161         /*
162          * only for ASYNC commands
163          * (which is somewhat stupid -- look at iwl-sta.c for instance
164          * which duplicates a bunch of code because the callback isn't
165          * invoked for SYNC commands, if it were and its result passed
166          * through it would be simpler...)
167          */
168         void (*callback)(struct iwl_priv *priv,
169                          struct iwl_device_cmd *cmd,
170                          struct sk_buff *skb);
171
172         /* The CMD_SIZE_HUGE flag bit indicates that the command
173          * structure is stored at the end of the shared queue memory. */
174         u32 flags;
175
176         DECLARE_PCI_UNMAP_ADDR(mapping)
177         DECLARE_PCI_UNMAP_LEN(len)
178 };
179
180 /*
181  * Generic queue structure
182  *
183  * Contains common data for Rx and Tx queues
184  */
185 struct iwl_queue {
186         int n_bd;              /* number of BDs in this queue */
187         int write_ptr;       /* 1-st empty entry (index) host_w*/
188         int read_ptr;         /* last used entry (index) host_r*/
189         dma_addr_t dma_addr;   /* physical addr for BD's */
190         int n_window;          /* safe queue window */
191         u32 id;
192         int low_mark;          /* low watermark, resume queue if free
193                                 * space more than this */
194         int high_mark;         /* high watermark, stop queue if free
195                                 * space less than this */
196 } __attribute__ ((packed));
197
198 /* One for each TFD */
199 struct iwl_tx_info {
200         struct sk_buff *skb[IWL_NUM_OF_TBS - 1];
201 };
202
203 /**
204  * struct iwl_tx_queue - Tx Queue for DMA
205  * @q: generic Rx/Tx queue descriptor
206  * @bd: base of circular buffer of TFDs
207  * @cmd: array of command/TX buffer pointers
208  * @meta: array of meta data for each command/tx buffer
209  * @dma_addr_cmd: physical address of cmd/tx buffer array
210  * @txb: array of per-TFD driver data
211  * @need_update: indicates need to update read/write index
212  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
213  *
214  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
215  * descriptors) and required locking structures.
216  */
217 #define TFD_TX_CMD_SLOTS 256
218 #define TFD_CMD_SLOTS 32
219
220 struct iwl_tx_queue {
221         struct iwl_queue q;
222         void *tfds;
223         struct iwl_device_cmd **cmd;
224         struct iwl_cmd_meta *meta;
225         struct iwl_tx_info *txb;
226         u8 need_update;
227         u8 sched_retry;
228         u8 active;
229         u8 swq_id;
230 };
231
232 #define IWL_NUM_SCAN_RATES         (2)
233
234 struct iwl4965_channel_tgd_info {
235         u8 type;
236         s8 max_power;
237 };
238
239 struct iwl4965_channel_tgh_info {
240         s64 last_radar_time;
241 };
242
243 #define IWL4965_MAX_RATE (33)
244
245 struct iwl3945_clip_group {
246         /* maximum power level to prevent clipping for each rate, derived by
247          *   us from this band's saturation power in EEPROM */
248         const s8 clip_powers[IWL_MAX_RATES];
249 };
250
251 /* current Tx power values to use, one for each rate for each channel.
252  * requested power is limited by:
253  * -- regulatory EEPROM limits for this channel
254  * -- hardware capabilities (clip-powers)
255  * -- spectrum management
256  * -- user preference (e.g. iwconfig)
257  * when requested power is set, base power index must also be set. */
258 struct iwl3945_channel_power_info {
259         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
260         s8 power_table_index;   /* actual (compenst'd) index into gain table */
261         s8 base_power_index;    /* gain index for power at factory temp. */
262         s8 requested_power;     /* power (dBm) requested for this chnl/rate */
263 };
264
265 /* current scan Tx power values to use, one for each scan rate for each
266  * channel. */
267 struct iwl3945_scan_power_info {
268         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
269         s8 power_table_index;   /* actual (compenst'd) index into gain table */
270         s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
271 };
272
273 /*
274  * One for each channel, holds all channel setup data
275  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
276  *     with one another!
277  */
278 struct iwl_channel_info {
279         struct iwl4965_channel_tgd_info tgd;
280         struct iwl4965_channel_tgh_info tgh;
281         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
282         struct iwl_eeprom_channel ht40_eeprom;  /* EEPROM regulatory limit for
283                                                  * HT40 channel */
284
285         u8 channel;       /* channel number */
286         u8 flags;         /* flags copied from EEPROM */
287         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
288         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) limit */
289         s8 min_power;     /* always 0 */
290         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
291
292         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
293         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
294         enum ieee80211_band band;
295
296         /* HT40 channel info */
297         s8 ht40_max_power_avg;  /* (dBm) regul. eeprom, normal Tx, any rate */
298         s8 ht40_curr_txpow;     /* (dBm) regulatory/spectrum/user (not h/w) */
299         s8 ht40_min_power;      /* always 0 */
300         s8 ht40_scan_power;     /* (dBm) eeprom, direct scans, any rate */
301         u8 ht40_flags;          /* flags copied from EEPROM */
302         u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
303
304         /* Radio/DSP gain settings for each "normal" data Tx rate.
305          * These include, in addition to RF and DSP gain, a few fields for
306          *   remembering/modifying gain settings (indexes). */
307         struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
308
309         /* Radio/DSP gain settings for each scan rate, for directed scans. */
310         struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
311 };
312
313 #define IWL_TX_FIFO_AC0 0
314 #define IWL_TX_FIFO_AC1 1
315 #define IWL_TX_FIFO_AC2 2
316 #define IWL_TX_FIFO_AC3 3
317 #define IWL_TX_FIFO_HCCA_1      5
318 #define IWL_TX_FIFO_HCCA_2      6
319 #define IWL_TX_FIFO_NONE        7
320
321 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
322  * Set the minimum to accommodate the 4 standard TX queues, 1 command
323  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
324 #define IWL_MIN_NUM_QUEUES      10
325
326 /* Power management (not Tx power) structures */
327
328 enum iwl_pwr_src {
329         IWL_PWR_SRC_VMAIN,
330         IWL_PWR_SRC_VAUX,
331 };
332
333 #define IEEE80211_DATA_LEN              2304
334 #define IEEE80211_4ADDR_LEN             30
335 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
336 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
337
338 struct iwl_frame {
339         union {
340                 struct ieee80211_hdr frame;
341                 struct iwl_tx_beacon_cmd beacon;
342                 u8 raw[IEEE80211_FRAME_LEN];
343                 u8 cmd[360];
344         } u;
345         struct list_head list;
346 };
347
348 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
349 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
350 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
351
352 enum {
353         CMD_SYNC = 0,
354         CMD_SIZE_NORMAL = 0,
355         CMD_NO_SKB = 0,
356         CMD_SIZE_HUGE = (1 << 0),
357         CMD_ASYNC = (1 << 1),
358         CMD_WANT_SKB = (1 << 2),
359 };
360
361 #define IWL_CMD_MAX_PAYLOAD 320
362
363 /**
364  * struct iwl_device_cmd
365  *
366  * For allocation of the command and tx queues, this establishes the overall
367  * size of the largest command we send to uCode, except for a scan command
368  * (which is relatively huge; space is allocated separately).
369  */
370 struct iwl_device_cmd {
371         struct iwl_cmd_header hdr;      /* uCode API */
372         union {
373                 u32 flags;
374                 u8 val8;
375                 u16 val16;
376                 u32 val32;
377                 struct iwl_tx_cmd tx;
378                 u8 payload[IWL_CMD_MAX_PAYLOAD];
379         } __attribute__ ((packed)) cmd;
380 } __attribute__ ((packed));
381
382 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
383
384
385 struct iwl_host_cmd {
386         const void *data;
387         struct sk_buff *reply_skb;
388         void (*callback)(struct iwl_priv *priv,
389                          struct iwl_device_cmd *cmd,
390                          struct sk_buff *skb);
391         u32 flags;
392         u16 len;
393         u8 id;
394 };
395
396 /*
397  * RX related structures and functions
398  */
399 #define RX_FREE_BUFFERS 64
400 #define RX_LOW_WATERMARK 8
401
402 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
403 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
404 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
405
406 /**
407  * struct iwl_rx_queue - Rx queue
408  * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
409  * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
410  * @read: Shared index to newest available Rx buffer
411  * @write: Shared index to oldest written Rx packet
412  * @free_count: Number of pre-allocated buffers in rx_free
413  * @rx_free: list of free SKBs for use
414  * @rx_used: List of Rx buffers with no SKB
415  * @need_update: flag to indicate we need to update read/write index
416  * @rb_stts: driver's pointer to receive buffer status
417  * @rb_stts_dma: bus address of receive buffer status
418  *
419  * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
420  */
421 struct iwl_rx_queue {
422         __le32 *bd;
423         dma_addr_t dma_addr;
424         struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
425         struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
426         u32 read;
427         u32 write;
428         u32 free_count;
429         u32 write_actual;
430         struct list_head rx_free;
431         struct list_head rx_used;
432         int need_update;
433         struct iwl_rb_status *rb_stts;
434         dma_addr_t rb_stts_dma;
435         spinlock_t lock;
436 };
437
438 #define IWL_SUPPORTED_RATES_IE_LEN         8
439
440 #define MAX_TID_COUNT        9
441
442 #define IWL_INVALID_RATE     0xFF
443 #define IWL_INVALID_VALUE    -1
444
445 /**
446  * struct iwl_ht_agg -- aggregation status while waiting for block-ack
447  * @txq_id: Tx queue used for Tx attempt
448  * @frame_count: # frames attempted by Tx command
449  * @wait_for_ba: Expect block-ack before next Tx reply
450  * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
451  * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
452  * @bitmap1: High order, one bit for each frame pending ACK in Tx window
453  * @rate_n_flags: Rate at which Tx was attempted
454  *
455  * If REPLY_TX indicates that aggregation was attempted, driver must wait
456  * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
457  * until block ack arrives.
458  */
459 struct iwl_ht_agg {
460         u16 txq_id;
461         u16 frame_count;
462         u16 wait_for_ba;
463         u16 start_idx;
464         u64 bitmap;
465         u32 rate_n_flags;
466 #define IWL_AGG_OFF 0
467 #define IWL_AGG_ON 1
468 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
469 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
470         u8 state;
471 };
472
473
474 struct iwl_tid_data {
475         u16 seq_number;
476         u16 tfds_in_queue;
477         struct iwl_ht_agg agg;
478 };
479
480 struct iwl_hw_key {
481         enum ieee80211_key_alg alg;
482         int keylen;
483         u8 keyidx;
484         u8 key[32];
485 };
486
487 union iwl_ht_rate_supp {
488         u16 rates;
489         struct {
490                 u8 siso_rate;
491                 u8 mimo_rate;
492         };
493 };
494
495 #define CFG_HT_RX_AMPDU_FACTOR_DEF  (0x3)
496
497 /*
498  * Maximal MPDU density for TX aggregation
499  * 4 - 2us density
500  * 5 - 4us density
501  * 6 - 8us density
502  * 7 - 16us density
503  */
504 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
505 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
506
507 struct iwl_ht_config {
508         /* self configuration data */
509         bool is_ht;
510         bool is_40mhz;
511         bool single_chain_sufficient;
512         /* BSS related data */
513         u8 extension_chan_offset;
514         u8 ht_protection;
515         u8 non_GF_STA_present;
516 };
517
518 union iwl_qos_capabity {
519         struct {
520                 u8 edca_count:4;        /* bit 0-3 */
521                 u8 q_ack:1;             /* bit 4 */
522                 u8 queue_request:1;     /* bit 5 */
523                 u8 txop_request:1;      /* bit 6 */
524                 u8 reserved:1;          /* bit 7 */
525         } q_AP;
526         struct {
527                 u8 acvo_APSD:1;         /* bit 0 */
528                 u8 acvi_APSD:1;         /* bit 1 */
529                 u8 ac_bk_APSD:1;        /* bit 2 */
530                 u8 ac_be_APSD:1;        /* bit 3 */
531                 u8 q_ack:1;             /* bit 4 */
532                 u8 max_len:2;           /* bit 5-6 */
533                 u8 more_data_ack:1;     /* bit 7 */
534         } q_STA;
535         u8 val;
536 };
537
538 /* QoS structures */
539 struct iwl_qos_info {
540         int qos_active;
541         union iwl_qos_capabity qos_cap;
542         struct iwl_qosparam_cmd def_qos_parm;
543 };
544
545 #define STA_PS_STATUS_WAKE             0
546 #define STA_PS_STATUS_SLEEP            1
547
548
549 struct iwl3945_station_entry {
550         struct iwl3945_addsta_cmd sta;
551         struct iwl_tid_data tid[MAX_TID_COUNT];
552         u8 used;
553         u8 ps_status;
554         struct iwl_hw_key keyinfo;
555 };
556
557 struct iwl_station_entry {
558         struct iwl_addsta_cmd sta;
559         struct iwl_tid_data tid[MAX_TID_COUNT];
560         u8 used;
561         u8 ps_status;
562         struct iwl_hw_key keyinfo;
563 };
564
565 /* one for each uCode image (inst/data, boot/init/runtime) */
566 struct fw_desc {
567         void *v_addr;           /* access by driver */
568         dma_addr_t p_addr;      /* access by card's busmaster DMA */
569         u32 len;                /* bytes */
570 };
571
572 /* uCode file layout */
573 struct iwl_ucode_header {
574         __le32 ver;     /* major/minor/API/serial */
575         union {
576                 struct {
577                         __le32 inst_size;       /* bytes of runtime code */
578                         __le32 data_size;       /* bytes of runtime data */
579                         __le32 init_size;       /* bytes of init code */
580                         __le32 init_data_size;  /* bytes of init data */
581                         __le32 boot_size;       /* bytes of bootstrap code */
582                         u8 data[0];             /* in same order as sizes */
583                 } v1;
584                 struct {
585                         __le32 build;           /* build number */
586                         __le32 inst_size;       /* bytes of runtime code */
587                         __le32 data_size;       /* bytes of runtime data */
588                         __le32 init_size;       /* bytes of init code */
589                         __le32 init_data_size;  /* bytes of init data */
590                         __le32 boot_size;       /* bytes of bootstrap code */
591                         u8 data[0];             /* in same order as sizes */
592                 } v2;
593         } u;
594 };
595 #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
596
597 struct iwl4965_ibss_seq {
598         u8 mac[ETH_ALEN];
599         u16 seq_num;
600         u16 frag_num;
601         unsigned long packet_time;
602         struct list_head list;
603 };
604
605 struct iwl_sensitivity_ranges {
606         u16 min_nrg_cck;
607         u16 max_nrg_cck;
608
609         u16 nrg_th_cck;
610         u16 nrg_th_ofdm;
611
612         u16 auto_corr_min_ofdm;
613         u16 auto_corr_min_ofdm_mrc;
614         u16 auto_corr_min_ofdm_x1;
615         u16 auto_corr_min_ofdm_mrc_x1;
616
617         u16 auto_corr_max_ofdm;
618         u16 auto_corr_max_ofdm_mrc;
619         u16 auto_corr_max_ofdm_x1;
620         u16 auto_corr_max_ofdm_mrc_x1;
621
622         u16 auto_corr_max_cck;
623         u16 auto_corr_max_cck_mrc;
624         u16 auto_corr_min_cck;
625         u16 auto_corr_min_cck_mrc;
626 };
627
628
629 #define KELVIN_TO_CELSIUS(x) ((x)-273)
630 #define CELSIUS_TO_KELVIN(x) ((x)+273)
631
632
633 /**
634  * struct iwl_hw_params
635  * @max_txq_num: Max # Tx queues supported
636  * @dma_chnl_num: Number of Tx DMA/FIFO channels
637  * @scd_bc_tbls_size: size of scheduler byte count tables
638  * @tfd_size: TFD size
639  * @tx/rx_chains_num: Number of TX/RX chains
640  * @valid_tx/rx_ant: usable antennas
641  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
642  * @max_rxq_log: Log-base-2 of max_rxq_size
643  * @rx_buf_size: Rx buffer size
644  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
645  * @max_stations:
646  * @bcast_sta_id:
647  * @ht40_channel: is 40MHz width possible in band 2.4
648  * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
649  * @sw_crypto: 0 for hw, 1 for sw
650  * @max_xxx_size: for ucode uses
651  * @ct_kill_threshold: temperature threshold
652  * @calib_init_cfg: setup initial calibrations for the hw
653  * @struct iwl_sensitivity_ranges: range of sensitivity values
654  */
655 struct iwl_hw_params {
656         u8 max_txq_num;
657         u8 dma_chnl_num;
658         u16 scd_bc_tbls_size;
659         u32 tfd_size;
660         u8  tx_chains_num;
661         u8  rx_chains_num;
662         u8  valid_tx_ant;
663         u8  valid_rx_ant;
664         u16 max_rxq_size;
665         u16 max_rxq_log;
666         u32 rx_buf_size;
667         u32 rx_wrt_ptr_reg;
668         u32 max_pkt_size;
669         u8  max_stations;
670         u8  bcast_sta_id;
671         u8  ht40_channel;
672         u8  max_beacon_itrvl;   /* in 1024 ms */
673         u32 max_inst_size;
674         u32 max_data_size;
675         u32 max_bsm_size;
676         u32 ct_kill_threshold; /* value in hw-dependent units */
677         u32 ct_kill_exit_threshold; /* value in hw-dependent units */
678                                     /* for 1000, 6000 series and up */
679         u32 calib_init_cfg;
680         const struct iwl_sensitivity_ranges *sens;
681 };
682
683
684 /******************************************************************************
685  *
686  * Functions implemented in core module which are forward declared here
687  * for use by iwl-[4-5].c
688  *
689  * NOTE:  The implementation of these functions are not hardware specific
690  * which is why they are in the core module files.
691  *
692  * Naming convention --
693  * iwl_         <-- Is part of iwlwifi
694  * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
695  * iwl4965_bg_      <-- Called from work queue context
696  * iwl4965_mac_     <-- mac80211 callback
697  *
698  ****************************************************************************/
699 extern void iwl_update_chain_flags(struct iwl_priv *priv);
700 extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
701 extern const u8 iwl_bcast_addr[ETH_ALEN];
702 extern int iwl_rxq_stop(struct iwl_priv *priv);
703 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
704 extern int iwl_queue_space(const struct iwl_queue *q);
705 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
706 {
707         return q->write_ptr > q->read_ptr ?
708                 (i >= q->read_ptr && i < q->write_ptr) :
709                 !(i < q->read_ptr && i >= q->write_ptr);
710 }
711
712
713 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
714 {
715         /* This is for scan command, the big buffer at end of command array */
716         if (is_huge)
717                 return q->n_window;     /* must be power of 2 */
718
719         /* Otherwise, use normal size buffers */
720         return index & (q->n_window - 1);
721 }
722
723
724 struct iwl_dma_ptr {
725         dma_addr_t dma;
726         void *addr;
727         size_t size;
728 };
729
730 #define IWL_OPERATION_MODE_AUTO     0
731 #define IWL_OPERATION_MODE_HT_ONLY  1
732 #define IWL_OPERATION_MODE_MIXED    2
733 #define IWL_OPERATION_MODE_20MHZ    3
734
735 #define IWL_TX_CRC_SIZE 4
736 #define IWL_TX_DELIMITER_SIZE 4
737
738 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
739
740 /* Sensitivity and chain noise calibration */
741 #define INITIALIZATION_VALUE            0xFFFF
742 #define IWL4965_CAL_NUM_BEACONS         20
743 #define IWL_CAL_NUM_BEACONS             16
744 #define MAXIMUM_ALLOWED_PATHLOSS        15
745
746 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
747
748 #define MAX_FA_OFDM  50
749 #define MIN_FA_OFDM  5
750 #define MAX_FA_CCK   50
751 #define MIN_FA_CCK   5
752
753 #define AUTO_CORR_STEP_OFDM       1
754
755 #define AUTO_CORR_STEP_CCK     3
756 #define AUTO_CORR_MAX_TH_CCK   160
757
758 #define NRG_DIFF               2
759 #define NRG_STEP_CCK           2
760 #define NRG_MARGIN             8
761 #define MAX_NUMBER_CCK_NO_FA 100
762
763 #define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
764
765 #define CHAIN_A             0
766 #define CHAIN_B             1
767 #define CHAIN_C             2
768 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
769 #define ALL_BAND_FILTER                 0xFF00
770 #define IN_BAND_FILTER                  0xFF
771 #define MIN_AVERAGE_NOISE_MAX_VALUE     0xFFFFFFFF
772
773 #define NRG_NUM_PREV_STAT_L     20
774 #define NUM_RX_CHAINS           3
775
776 enum iwl4965_false_alarm_state {
777         IWL_FA_TOO_MANY = 0,
778         IWL_FA_TOO_FEW = 1,
779         IWL_FA_GOOD_RANGE = 2,
780 };
781
782 enum iwl4965_chain_noise_state {
783         IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
784         IWL_CHAIN_NOISE_ACCUMULATE,
785         IWL_CHAIN_NOISE_CALIBRATED,
786         IWL_CHAIN_NOISE_DONE,
787 };
788
789 enum iwl4965_calib_enabled_state {
790         IWL_CALIB_DISABLED = 0,  /* must be 0 */
791         IWL_CALIB_ENABLED = 1,
792 };
793
794
795 /*
796  * enum iwl_calib
797  * defines the order in which results of initial calibrations
798  * should be sent to the runtime uCode
799  */
800 enum iwl_calib {
801         IWL_CALIB_XTAL,
802         IWL_CALIB_DC,
803         IWL_CALIB_LO,
804         IWL_CALIB_TX_IQ,
805         IWL_CALIB_TX_IQ_PERD,
806         IWL_CALIB_BASE_BAND,
807         IWL_CALIB_MAX
808 };
809
810 /* Opaque calibration results */
811 struct iwl_calib_result {
812         void *buf;
813         size_t buf_len;
814 };
815
816 enum ucode_type {
817         UCODE_NONE = 0,
818         UCODE_INIT,
819         UCODE_RT
820 };
821
822 /* Sensitivity calib data */
823 struct iwl_sensitivity_data {
824         u32 auto_corr_ofdm;
825         u32 auto_corr_ofdm_mrc;
826         u32 auto_corr_ofdm_x1;
827         u32 auto_corr_ofdm_mrc_x1;
828         u32 auto_corr_cck;
829         u32 auto_corr_cck_mrc;
830
831         u32 last_bad_plcp_cnt_ofdm;
832         u32 last_fa_cnt_ofdm;
833         u32 last_bad_plcp_cnt_cck;
834         u32 last_fa_cnt_cck;
835
836         u32 nrg_curr_state;
837         u32 nrg_prev_state;
838         u32 nrg_value[10];
839         u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
840         u32 nrg_silence_ref;
841         u32 nrg_energy_idx;
842         u32 nrg_silence_idx;
843         u32 nrg_th_cck;
844         s32 nrg_auto_corr_silence_diff;
845         u32 num_in_cck_no_fa;
846         u32 nrg_th_ofdm;
847 };
848
849 /* Chain noise (differential Rx gain) calib data */
850 struct iwl_chain_noise_data {
851         u32 active_chains;
852         u32 chain_noise_a;
853         u32 chain_noise_b;
854         u32 chain_noise_c;
855         u32 chain_signal_a;
856         u32 chain_signal_b;
857         u32 chain_signal_c;
858         u16 beacon_count;
859         u8 disconn_array[NUM_RX_CHAINS];
860         u8 delta_gain_code[NUM_RX_CHAINS];
861         u8 radio_write;
862         u8 state;
863 };
864
865 #define EEPROM_SEM_TIMEOUT 10           /* milliseconds */
866 #define EEPROM_SEM_RETRY_LIMIT 1000     /* number of attempts (not time) */
867
868 #define IWL_TRAFFIC_ENTRIES     (256)
869 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
870
871 enum {
872         MEASUREMENT_READY = (1 << 0),
873         MEASUREMENT_ACTIVE = (1 << 1),
874 };
875
876 enum iwl_nvm_type {
877         NVM_DEVICE_TYPE_EEPROM = 0,
878         NVM_DEVICE_TYPE_OTP,
879 };
880
881 /*
882  * Two types of OTP memory access modes
883  *   IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
884  *                              based on physical memory addressing
885  *   IWL_OTP_ACCESS_RELATIVE - relative address mode,
886  *                             based on logical memory addressing
887  */
888 enum iwl_access_mode {
889         IWL_OTP_ACCESS_ABSOLUTE,
890         IWL_OTP_ACCESS_RELATIVE,
891 };
892
893 /**
894  * enum iwl_pa_type - Power Amplifier type
895  * @IWL_PA_SYSTEM:  based on uCode configuration
896  * @IWL_PA_HYBRID: use both Internal and external PA
897  * @IWL_PA_INTERNAL: use Internal only
898  */
899 enum iwl_pa_type {
900         IWL_PA_SYSTEM = 0,
901         IWL_PA_HYBRID = 1,
902         IWL_PA_INTERNAL = 2,
903 };
904
905 /* interrupt statistics */
906 struct isr_statistics {
907         u32 hw;
908         u32 sw;
909         u32 sw_err;
910         u32 sch;
911         u32 alive;
912         u32 rfkill;
913         u32 ctkill;
914         u32 wakeup;
915         u32 rx;
916         u32 rx_handlers[REPLY_MAX];
917         u32 tx;
918         u32 unhandled;
919 };
920
921 #ifdef CONFIG_IWLWIFI_DEBUGFS
922 /* management statistics */
923 enum iwl_mgmt_stats {
924         MANAGEMENT_ASSOC_REQ = 0,
925         MANAGEMENT_ASSOC_RESP,
926         MANAGEMENT_REASSOC_REQ,
927         MANAGEMENT_REASSOC_RESP,
928         MANAGEMENT_PROBE_REQ,
929         MANAGEMENT_PROBE_RESP,
930         MANAGEMENT_BEACON,
931         MANAGEMENT_ATIM,
932         MANAGEMENT_DISASSOC,
933         MANAGEMENT_AUTH,
934         MANAGEMENT_DEAUTH,
935         MANAGEMENT_ACTION,
936         MANAGEMENT_MAX,
937 };
938 /* control statistics */
939 enum iwl_ctrl_stats {
940         CONTROL_BACK_REQ =  0,
941         CONTROL_BACK,
942         CONTROL_PSPOLL,
943         CONTROL_RTS,
944         CONTROL_CTS,
945         CONTROL_ACK,
946         CONTROL_CFEND,
947         CONTROL_CFENDACK,
948         CONTROL_MAX,
949 };
950
951 struct traffic_stats {
952         u32 mgmt[MANAGEMENT_MAX];
953         u32 ctrl[CONTROL_MAX];
954         u32 data_cnt;
955         u64 data_bytes;
956 };
957 #else
958 struct traffic_stats {
959         u64 data_bytes;
960 };
961 #endif
962
963 #define IWL_MAX_NUM_QUEUES      20 /* FIXME: do dynamic allocation */
964
965 struct iwl_priv {
966
967         /* ieee device used by generic ieee processing code */
968         struct ieee80211_hw *hw;
969         struct ieee80211_channel *ieee_channels;
970         struct ieee80211_rate *ieee_rates;
971         struct iwl_cfg *cfg;
972
973         /* temporary frame storage list */
974         struct list_head free_frames;
975         int frames_count;
976
977         enum ieee80211_band band;
978         int alloc_rxb_skb;
979
980         void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
981                                        struct iwl_rx_mem_buffer *rxb);
982
983         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
984
985 #if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
986         /* spectrum measurement report caching */
987         struct iwl_spectrum_notification measure_report;
988         u8 measurement_status;
989 #endif
990         /* ucode beacon time */
991         u32 ucode_beacon_time;
992
993         /* we allocate array of iwl4965_channel_info for NIC's valid channels.
994          *    Access via channel # using indirect index array */
995         struct iwl_channel_info *channel_info;  /* channel info array */
996         u8 channel_count;       /* # of channels */
997
998         /* each calibration channel group in the EEPROM has a derived
999          * clip setting for each rate. 3945 only.*/
1000         const struct iwl3945_clip_group clip39_groups[5];
1001
1002         /* thermal calibration */
1003         s32 temperature;        /* degrees Kelvin */
1004         s32 last_temperature;
1005
1006         /* init calibration results */
1007         struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1008
1009         /* Scan related variables */
1010         unsigned long last_scan_jiffies;
1011         unsigned long next_scan_jiffies;
1012         unsigned long scan_start;
1013         unsigned long scan_pass_start;
1014         unsigned long scan_start_tsf;
1015         void *scan;
1016         int scan_bands;
1017         struct cfg80211_scan_request *scan_request;
1018         u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1019         u8 mgmt_tx_ant;
1020
1021         /* spinlock */
1022         spinlock_t lock;        /* protect general shared data */
1023         spinlock_t hcmd_lock;   /* protect hcmd */
1024         spinlock_t reg_lock;    /* protect hw register access */
1025         struct mutex mutex;
1026
1027         /* basic pci-network driver stuff */
1028         struct pci_dev *pci_dev;
1029
1030         /* pci hardware address support */
1031         void __iomem *hw_base;
1032         u32  hw_rev;
1033         u32  hw_wa_rev;
1034         u8   rev_id;
1035
1036         /* uCode images, save to reload in case of failure */
1037         u32 ucode_ver;                  /* version of ucode, copy of
1038                                            iwl_ucode.ver */
1039         struct fw_desc ucode_code;      /* runtime inst */
1040         struct fw_desc ucode_data;      /* runtime data original */
1041         struct fw_desc ucode_data_backup;       /* runtime data save/restore */
1042         struct fw_desc ucode_init;      /* initialization inst */
1043         struct fw_desc ucode_init_data; /* initialization data */
1044         struct fw_desc ucode_boot;      /* bootstrap inst */
1045         enum ucode_type ucode_type;
1046         u8 ucode_write_complete;        /* the image write is complete */
1047
1048
1049         struct iwl_rxon_time_cmd rxon_timing;
1050
1051         /* We declare this const so it can only be
1052          * changed via explicit cast within the
1053          * routines that actually update the physical
1054          * hardware */
1055         const struct iwl_rxon_cmd active_rxon;
1056         struct iwl_rxon_cmd staging_rxon;
1057
1058         struct iwl_rxon_cmd recovery_rxon;
1059
1060         /* 1st responses from initialize and runtime uCode images.
1061          * 4965's initialize alive response contains some calibration data. */
1062         struct iwl_init_alive_resp card_alive_init;
1063         struct iwl_alive_resp card_alive;
1064
1065         unsigned long last_blink_time;
1066         u8 last_blink_rate;
1067         u8 allow_blinking;
1068         u64 led_tpt;
1069
1070         u16 active_rate;
1071         u16 active_rate_basic;
1072
1073         u8 assoc_station_added;
1074         u8 start_calib;
1075         struct iwl_sensitivity_data sensitivity_data;
1076         struct iwl_chain_noise_data chain_noise_data;
1077         __le16 sensitivity_tbl[HD_TABLE_SIZE];
1078
1079         struct iwl_ht_config current_ht_config;
1080         u8 last_phy_res[100];
1081
1082         /* Rate scaling data */
1083         s8 data_retry_limit;
1084         u8 retry_rate;
1085
1086         wait_queue_head_t wait_command_queue;
1087
1088         int activity_timer_active;
1089
1090         /* Rx and Tx DMA processing queues */
1091         struct iwl_rx_queue rxq;
1092         struct iwl_tx_queue txq[IWL_MAX_NUM_QUEUES];
1093         unsigned long txq_ctx_active_msk;
1094         struct iwl_dma_ptr  kw; /* keep warm address */
1095         struct iwl_dma_ptr  scd_bc_tbls;
1096
1097         u32 scd_base_addr;      /* scheduler sram base address */
1098
1099         unsigned long status;
1100
1101         int last_rx_rssi;       /* From Rx packet statistics */
1102         int last_rx_noise;      /* From beacon statistics */
1103
1104         /* counts mgmt, ctl, and data packets */
1105         struct traffic_stats tx_stats;
1106         struct traffic_stats rx_stats;
1107
1108         /* counts interrupts */
1109         struct isr_statistics isr_stats;
1110
1111         struct iwl_power_mgr power_data;
1112         struct iwl_tt_mgmt thermal_throttle;
1113
1114         struct iwl_notif_statistics statistics;
1115         unsigned long last_statistics_time;
1116
1117         /* context information */
1118         u16 rates_mask;
1119
1120         u8 bssid[ETH_ALEN];
1121         u16 rts_threshold;
1122         u8 mac_addr[ETH_ALEN];
1123
1124         /*station table variables */
1125         spinlock_t sta_lock;
1126         int num_stations;
1127         struct iwl_station_entry stations[IWL_STATION_COUNT];
1128         struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1129         u8 default_wep_key;
1130         u8 key_mapping_key;
1131         unsigned long ucode_key_table;
1132
1133         /* queue refcounts */
1134 #define IWL_MAX_HW_QUEUES       32
1135         unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1136         /* for each AC */
1137         atomic_t queue_stop_count[4];
1138
1139         /* Indication if ieee80211_ops->open has been called */
1140         u8 is_open;
1141
1142         u8 mac80211_registered;
1143
1144         /* Rx'd packet timing information */
1145         u32 last_beacon_time;
1146         u64 last_tsf;
1147
1148         /* eeprom */
1149         u8 *eeprom;
1150         int    nvm_device_type;
1151         struct iwl_eeprom_calib_info *calib_info;
1152
1153         enum nl80211_iftype iw_mode;
1154
1155         struct sk_buff *ibss_beacon;
1156
1157         /* Last Rx'd beacon timestamp */
1158         u64 timestamp;
1159         u16 beacon_int;
1160         struct ieee80211_vif *vif;
1161
1162         /*Added for 3945 */
1163         void *shared_virt;
1164         dma_addr_t shared_phys;
1165         /*End*/
1166         struct iwl_hw_params hw_params;
1167
1168         /* INT ICT Table */
1169         __le32 *ict_tbl;
1170         dma_addr_t ict_tbl_dma;
1171         dma_addr_t aligned_ict_tbl_dma;
1172         int ict_index;
1173         void *ict_tbl_vir;
1174         u32 inta;
1175         bool use_ict;
1176
1177         u32 inta_mask;
1178         /* Current association information needed to configure the
1179          * hardware */
1180         u16 assoc_id;
1181         u16 assoc_capability;
1182
1183         struct iwl_qos_info qos_data;
1184
1185         struct workqueue_struct *workqueue;
1186
1187         struct work_struct up;
1188         struct work_struct restart;
1189         struct work_struct calibrated_work;
1190         struct work_struct scan_completed;
1191         struct work_struct rx_replenish;
1192         struct work_struct abort_scan;
1193         struct work_struct update_link_led;
1194         struct work_struct auth_work;
1195         struct work_struct report_work;
1196         struct work_struct request_scan;
1197         struct work_struct beacon_update;
1198         struct work_struct tt_work;
1199         struct work_struct ct_enter;
1200         struct work_struct ct_exit;
1201
1202         struct tasklet_struct irq_tasklet;
1203
1204         struct delayed_work init_alive_start;
1205         struct delayed_work alive_start;
1206         struct delayed_work scan_check;
1207
1208         /*For 3945 only*/
1209         struct delayed_work thermal_periodic;
1210         struct delayed_work rfkill_poll;
1211
1212         /* TX Power */
1213         s8 tx_power_user_lmt;
1214         s8 tx_power_device_lmt;
1215
1216
1217 #ifdef CONFIG_IWLWIFI_DEBUG
1218         /* debugging info */
1219         u32 debug_level; /* per device debugging will override global
1220                             iwl_debug_level if set */
1221         u32 framecnt_to_us;
1222         atomic_t restrict_refcnt;
1223         bool disable_ht40;
1224 #ifdef CONFIG_IWLWIFI_DEBUGFS
1225         /* debugfs */
1226         u16 tx_traffic_idx;
1227         u16 rx_traffic_idx;
1228         u8 *tx_traffic;
1229         u8 *rx_traffic;
1230         struct iwl_debugfs *dbgfs;
1231 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1232 #endif /* CONFIG_IWLWIFI_DEBUG */
1233
1234         struct work_struct txpower_work;
1235         u32 disable_sens_cal;
1236         u32 disable_chain_noise_cal;
1237         u32 disable_tx_power_cal;
1238         struct work_struct run_time_calib_work;
1239         struct timer_list statistics_periodic;
1240         bool hw_ready;
1241         /*For 3945*/
1242 #define IWL_DEFAULT_TX_POWER 0x0F
1243
1244         struct iwl3945_notif_statistics statistics_39;
1245
1246         u32 sta_supp_rates;
1247 }; /*iwl_priv */
1248
1249 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1250 {
1251         set_bit(txq_id, &priv->txq_ctx_active_msk);
1252 }
1253
1254 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1255 {
1256         clear_bit(txq_id, &priv->txq_ctx_active_msk);
1257 }
1258
1259 #ifdef CONFIG_IWLWIFI_DEBUG
1260 const char *iwl_get_tx_fail_reason(u32 status);
1261 /*
1262  * iwl_get_debug_level: Return active debug level for device
1263  *
1264  * Using sysfs it is possible to set per device debug level. This debug
1265  * level will be used if set, otherwise the global debug level which can be
1266  * set via module parameter is used.
1267  */
1268 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1269 {
1270         if (priv->debug_level)
1271                 return priv->debug_level;
1272         else
1273                 return iwl_debug_level;
1274 }
1275 #else
1276 static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
1277
1278 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1279 {
1280         return iwl_debug_level;
1281 }
1282 #endif
1283
1284
1285 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1286                                                          int txq_id, int idx)
1287 {
1288         if (priv->txq[txq_id].txb[idx].skb[0])
1289                 return (struct ieee80211_hdr *)priv->txq[txq_id].
1290                                 txb[idx].skb[0]->data;
1291         return NULL;
1292 }
1293
1294
1295 static inline int iwl_is_associated(struct iwl_priv *priv)
1296 {
1297         return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1298 }
1299
1300 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1301 {
1302         if (ch_info == NULL)
1303                 return 0;
1304         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1305 }
1306
1307 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1308 {
1309         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1310 }
1311
1312 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1313 {
1314         return ch_info->band == IEEE80211_BAND_5GHZ;
1315 }
1316
1317 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1318 {
1319         return ch_info->band == IEEE80211_BAND_2GHZ;
1320 }
1321
1322 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1323 {
1324         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1325 }
1326
1327 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1328 {
1329         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1330 }
1331
1332 #endif                          /* __iwl_dev_h__ */