]> git.karo-electronics.de Git - mv-sheeva.git/blob - drivers/net/wireless/iwlwifi/iwl-dev.h
iwlwifi: remove unused parameter from iwl_channel_info
[mv-sheeva.git] / drivers / net / wireless / iwlwifi / iwl-dev.h
1 /******************************************************************************
2  *
3  * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program; if not, write to the Free Software Foundation, Inc.,
16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
17  *
18  * The full GNU General Public License is included in this distribution in the
19  * file called LICENSE.
20  *
21  * Contact Information:
22  *  Intel Linux Wireless <ilw@linux.intel.com>
23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24  *
25  *****************************************************************************/
26 /*
27  * Please use this file (iwl-dev.h) for driver implementation definitions.
28  * Please use iwl-commands.h for uCode API definitions.
29  * Please use iwl-4965-hw.h for hardware-related definitions.
30  */
31
32 #ifndef __iwl_dev_h__
33 #define __iwl_dev_h__
34
35 #include <linux/pci.h> /* for struct pci_device_id */
36 #include <linux/kernel.h>
37 #include <net/ieee80211_radiotap.h>
38
39 #include "iwl-eeprom.h"
40 #include "iwl-csr.h"
41 #include "iwl-prph.h"
42 #include "iwl-fh.h"
43 #include "iwl-debug.h"
44 #include "iwl-4965-hw.h"
45 #include "iwl-3945-hw.h"
46 #include "iwl-led.h"
47 #include "iwl-power.h"
48 #include "iwl-agn-rs.h"
49
50 /* configuration for the iwl4965 */
51 extern struct iwl_cfg iwl4965_agn_cfg;
52 extern struct iwl_cfg iwl5300_agn_cfg;
53 extern struct iwl_cfg iwl5100_agn_cfg;
54 extern struct iwl_cfg iwl5350_agn_cfg;
55 extern struct iwl_cfg iwl5100_bg_cfg;
56 extern struct iwl_cfg iwl5100_abg_cfg;
57 extern struct iwl_cfg iwl5150_agn_cfg;
58 extern struct iwl_cfg iwl6000h_2agn_cfg;
59 extern struct iwl_cfg iwl6000h_2abg_cfg;
60 extern struct iwl_cfg iwl6000h_2bg_cfg;
61 extern struct iwl_cfg iwl6000i_2agn_cfg;
62 extern struct iwl_cfg iwl6000i_2abg_cfg;
63 extern struct iwl_cfg iwl6000i_2bg_cfg;
64 extern struct iwl_cfg iwl6000_3agn_cfg;
65 extern struct iwl_cfg iwl6050_2agn_cfg;
66 extern struct iwl_cfg iwl6050_2abg_cfg;
67 extern struct iwl_cfg iwl6050_3agn_cfg;
68 extern struct iwl_cfg iwl1000_bgn_cfg;
69 extern struct iwl_cfg iwl1000_bg_cfg;
70
71 struct iwl_tx_queue;
72
73 /* shared structures from iwl-5000.c */
74 extern struct iwl_mod_params iwl50_mod_params;
75 extern struct iwl_ucode_ops iwl5000_ucode;
76 extern struct iwl_lib_ops iwl5000_lib;
77 extern struct iwl_hcmd_ops iwl5000_hcmd;
78 extern struct iwl_hcmd_utils_ops iwl5000_hcmd_utils;
79
80 /* shared functions from iwl-5000.c */
81 extern u16 iwl5000_get_hcmd_size(u8 cmd_id, u16 len);
82 extern u16 iwl5000_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd,
83                                      u8 *data);
84 extern void iwl5000_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
85                                     __le32 *tx_flags);
86 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
87                              struct iwl_rx_phy_res *rx_resp);
88 extern void iwl5000_nic_config(struct iwl_priv *priv);
89 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
90 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
91                                     size_t offset);
92 extern void iwl5000_txq_update_byte_cnt_tbl(struct iwl_priv *priv,
93                                             struct iwl_tx_queue *txq,
94                                             u16 byte_cnt);
95 extern void iwl5000_txq_inval_byte_cnt_tbl(struct iwl_priv *priv,
96                                     struct iwl_tx_queue *txq);
97 extern int iwl5000_load_ucode(struct iwl_priv *priv);
98 extern void iwl5000_init_alive_start(struct iwl_priv *priv);
99 extern int iwl5000_alive_notify(struct iwl_priv *priv);
100 extern int iwl5000_hw_set_hw_params(struct iwl_priv *priv);
101 extern int iwl5000_txq_agg_enable(struct iwl_priv *priv, int txq_id,
102                            int tx_fifo, int sta_id, int tid, u16 ssn_idx);
103 extern int iwl5000_txq_agg_disable(struct iwl_priv *priv, u16 txq_id,
104                             u16 ssn_idx, u8 tx_fifo);
105 extern void iwl5000_txq_set_sched(struct iwl_priv *priv, u32 mask);
106 extern void iwl5000_setup_deferred_work(struct iwl_priv *priv);
107 extern void iwl5000_rx_handler_setup(struct iwl_priv *priv);
108 extern int iwl5000_hw_valid_rtc_data_addr(u32 addr);
109 extern int iwl5000_send_tx_power(struct iwl_priv *priv);
110 extern void iwl5000_temperature(struct iwl_priv *priv);
111
112 /* CT-KILL constants */
113 #define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
114 #define CT_KILL_THRESHOLD          114 /* in Celsius */
115 #define CT_KILL_EXIT_THRESHOLD     95  /* in Celsius */
116
117 /* Default noise level to report when noise measurement is not available.
118  *   This may be because we're:
119  *   1)  Not associated (4965, no beacon statistics being sent to driver)
120  *   2)  Scanning (noise measurement does not apply to associated channel)
121  *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
122  * Use default noise value of -127 ... this is below the range of measurable
123  *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
124  *   Also, -127 works better than 0 when averaging frames with/without
125  *   noise info (e.g. averaging might be done in app); measured dBm values are
126  *   always negative ... using a negative value as the default keeps all
127  *   averages within an s8's (used in some apps) range of negative values. */
128 #define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
129
130 /*
131  * RTS threshold here is total size [2347] minus 4 FCS bytes
132  * Per spec:
133  *   a value of 0 means RTS on all data/management packets
134  *   a value > max MSDU size means no RTS
135  * else RTS for data/management frames where MPDU is larger
136  *   than RTS value.
137  */
138 #define DEFAULT_RTS_THRESHOLD     2347U
139 #define MIN_RTS_THRESHOLD         0U
140 #define MAX_RTS_THRESHOLD         2347U
141 #define MAX_MSDU_SIZE             2304U
142 #define MAX_MPDU_SIZE             2346U
143 #define DEFAULT_BEACON_INTERVAL   100U
144 #define DEFAULT_SHORT_RETRY_LIMIT 7U
145 #define DEFAULT_LONG_RETRY_LIMIT  4U
146
147 struct iwl_rx_mem_buffer {
148         dma_addr_t page_dma;
149         struct page *page;
150         struct list_head list;
151 };
152
153 #define rxb_addr(r) page_address(r->page)
154
155 /* defined below */
156 struct iwl_device_cmd;
157
158 struct iwl_cmd_meta {
159         /* only for SYNC commands, iff the reply skb is wanted */
160         struct iwl_host_cmd *source;
161         /*
162          * only for ASYNC commands
163          * (which is somewhat stupid -- look at iwl-sta.c for instance
164          * which duplicates a bunch of code because the callback isn't
165          * invoked for SYNC commands, if it were and its result passed
166          * through it would be simpler...)
167          */
168         void (*callback)(struct iwl_priv *priv,
169                          struct iwl_device_cmd *cmd,
170                          struct iwl_rx_packet *pkt);
171
172         /* The CMD_SIZE_HUGE flag bit indicates that the command
173          * structure is stored at the end of the shared queue memory. */
174         u32 flags;
175
176         DECLARE_PCI_UNMAP_ADDR(mapping)
177         DECLARE_PCI_UNMAP_LEN(len)
178 };
179
180 /*
181  * Generic queue structure
182  *
183  * Contains common data for Rx and Tx queues
184  */
185 struct iwl_queue {
186         int n_bd;              /* number of BDs in this queue */
187         int write_ptr;       /* 1-st empty entry (index) host_w*/
188         int read_ptr;         /* last used entry (index) host_r*/
189         dma_addr_t dma_addr;   /* physical addr for BD's */
190         int n_window;          /* safe queue window */
191         u32 id;
192         int low_mark;          /* low watermark, resume queue if free
193                                 * space more than this */
194         int high_mark;         /* high watermark, stop queue if free
195                                 * space less than this */
196 } __attribute__ ((packed));
197
198 /* One for each TFD */
199 struct iwl_tx_info {
200         struct sk_buff *skb[IWL_NUM_OF_TBS - 1];
201 };
202
203 /**
204  * struct iwl_tx_queue - Tx Queue for DMA
205  * @q: generic Rx/Tx queue descriptor
206  * @bd: base of circular buffer of TFDs
207  * @cmd: array of command/TX buffer pointers
208  * @meta: array of meta data for each command/tx buffer
209  * @dma_addr_cmd: physical address of cmd/tx buffer array
210  * @txb: array of per-TFD driver data
211  * @need_update: indicates need to update read/write index
212  * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
213  *
214  * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
215  * descriptors) and required locking structures.
216  */
217 #define TFD_TX_CMD_SLOTS 256
218 #define TFD_CMD_SLOTS 32
219
220 struct iwl_tx_queue {
221         struct iwl_queue q;
222         void *tfds;
223         struct iwl_device_cmd **cmd;
224         struct iwl_cmd_meta *meta;
225         struct iwl_tx_info *txb;
226         u8 need_update;
227         u8 sched_retry;
228         u8 active;
229         u8 swq_id;
230 };
231
232 #define IWL_NUM_SCAN_RATES         (2)
233
234 struct iwl4965_channel_tgd_info {
235         u8 type;
236         s8 max_power;
237 };
238
239 struct iwl4965_channel_tgh_info {
240         s64 last_radar_time;
241 };
242
243 #define IWL4965_MAX_RATE (33)
244
245 struct iwl3945_clip_group {
246         /* maximum power level to prevent clipping for each rate, derived by
247          *   us from this band's saturation power in EEPROM */
248         const s8 clip_powers[IWL_MAX_RATES];
249 };
250
251 /* current Tx power values to use, one for each rate for each channel.
252  * requested power is limited by:
253  * -- regulatory EEPROM limits for this channel
254  * -- hardware capabilities (clip-powers)
255  * -- spectrum management
256  * -- user preference (e.g. iwconfig)
257  * when requested power is set, base power index must also be set. */
258 struct iwl3945_channel_power_info {
259         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
260         s8 power_table_index;   /* actual (compenst'd) index into gain table */
261         s8 base_power_index;    /* gain index for power at factory temp. */
262         s8 requested_power;     /* power (dBm) requested for this chnl/rate */
263 };
264
265 /* current scan Tx power values to use, one for each scan rate for each
266  * channel. */
267 struct iwl3945_scan_power_info {
268         struct iwl3945_tx_power tpc;    /* actual radio and DSP gain settings */
269         s8 power_table_index;   /* actual (compenst'd) index into gain table */
270         s8 requested_power;     /* scan pwr (dBm) requested for chnl/rate */
271 };
272
273 /*
274  * One for each channel, holds all channel setup data
275  * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
276  *     with one another!
277  */
278 struct iwl_channel_info {
279         struct iwl4965_channel_tgd_info tgd;
280         struct iwl4965_channel_tgh_info tgh;
281         struct iwl_eeprom_channel eeprom;       /* EEPROM regulatory limit */
282         struct iwl_eeprom_channel ht40_eeprom;  /* EEPROM regulatory limit for
283                                                  * HT40 channel */
284
285         u8 channel;       /* channel number */
286         u8 flags;         /* flags copied from EEPROM */
287         s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
288         s8 curr_txpow;    /* (dBm) regulatory/spectrum/user (not h/w) limit */
289         s8 min_power;     /* always 0 */
290         s8 scan_power;    /* (dBm) regul. eeprom, direct scans, any rate */
291
292         u8 group_index;   /* 0-4, maps channel to group1/2/3/4/5 */
293         u8 band_index;    /* 0-4, maps channel to band1/2/3/4/5 */
294         enum ieee80211_band band;
295
296         /* HT40 channel info */
297         s8 ht40_max_power_avg;  /* (dBm) regul. eeprom, normal Tx, any rate */
298         u8 ht40_flags;          /* flags copied from EEPROM */
299         u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
300
301         /* Radio/DSP gain settings for each "normal" data Tx rate.
302          * These include, in addition to RF and DSP gain, a few fields for
303          *   remembering/modifying gain settings (indexes). */
304         struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
305
306         /* Radio/DSP gain settings for each scan rate, for directed scans. */
307         struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
308 };
309
310 #define IWL_TX_FIFO_AC0 0
311 #define IWL_TX_FIFO_AC1 1
312 #define IWL_TX_FIFO_AC2 2
313 #define IWL_TX_FIFO_AC3 3
314 #define IWL_TX_FIFO_HCCA_1      5
315 #define IWL_TX_FIFO_HCCA_2      6
316 #define IWL_TX_FIFO_NONE        7
317
318 /* Minimum number of queues. MAX_NUM is defined in hw specific files.
319  * Set the minimum to accommodate the 4 standard TX queues, 1 command
320  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
321 #define IWL_MIN_NUM_QUEUES      10
322
323 /*
324  * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00,
325  * the driver maps it into the appropriate device FIFO for the
326  * uCode.
327  */
328 #define IWL_CMD_QUEUE_NUM       4
329
330 /* Power management (not Tx power) structures */
331
332 enum iwl_pwr_src {
333         IWL_PWR_SRC_VMAIN,
334         IWL_PWR_SRC_VAUX,
335 };
336
337 #define IEEE80211_DATA_LEN              2304
338 #define IEEE80211_4ADDR_LEN             30
339 #define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
340 #define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
341
342 struct iwl_frame {
343         union {
344                 struct ieee80211_hdr frame;
345                 struct iwl_tx_beacon_cmd beacon;
346                 u8 raw[IEEE80211_FRAME_LEN];
347                 u8 cmd[360];
348         } u;
349         struct list_head list;
350 };
351
352 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
353 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
354 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
355
356 enum {
357         CMD_SYNC = 0,
358         CMD_SIZE_NORMAL = 0,
359         CMD_NO_SKB = 0,
360         CMD_SIZE_HUGE = (1 << 0),
361         CMD_ASYNC = (1 << 1),
362         CMD_WANT_SKB = (1 << 2),
363 };
364
365 #define DEF_CMD_PAYLOAD_SIZE 320
366
367 /*
368  * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header,
369  * SNAP header and alignment. It should also be big enough for 802.11
370  * control frames.
371  */
372 #define IWL_LINK_HDR_MAX 64
373
374 /**
375  * struct iwl_device_cmd
376  *
377  * For allocation of the command and tx queues, this establishes the overall
378  * size of the largest command we send to uCode, except for a scan command
379  * (which is relatively huge; space is allocated separately).
380  */
381 struct iwl_device_cmd {
382         struct iwl_cmd_header hdr;      /* uCode API */
383         union {
384                 u32 flags;
385                 u8 val8;
386                 u16 val16;
387                 u32 val32;
388                 struct iwl_tx_cmd tx;
389                 struct iwl6000_channel_switch_cmd chswitch;
390                 u8 payload[DEF_CMD_PAYLOAD_SIZE];
391         } __attribute__ ((packed)) cmd;
392 } __attribute__ ((packed));
393
394 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
395
396
397 struct iwl_host_cmd {
398         const void *data;
399         unsigned long reply_page;
400         void (*callback)(struct iwl_priv *priv,
401                          struct iwl_device_cmd *cmd,
402                          struct iwl_rx_packet *pkt);
403         u32 flags;
404         u16 len;
405         u8 id;
406 };
407
408 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
409 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
410 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
411
412 /**
413  * struct iwl_rx_queue - Rx queue
414  * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
415  * @dma_addr: bus address of buffer of receive buffer descriptors (rbd)
416  * @read: Shared index to newest available Rx buffer
417  * @write: Shared index to oldest written Rx packet
418  * @free_count: Number of pre-allocated buffers in rx_free
419  * @rx_free: list of free SKBs for use
420  * @rx_used: List of Rx buffers with no SKB
421  * @need_update: flag to indicate we need to update read/write index
422  * @rb_stts: driver's pointer to receive buffer status
423  * @rb_stts_dma: bus address of receive buffer status
424  *
425  * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
426  */
427 struct iwl_rx_queue {
428         __le32 *bd;
429         dma_addr_t dma_addr;
430         struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
431         struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
432         u32 read;
433         u32 write;
434         u32 free_count;
435         u32 write_actual;
436         struct list_head rx_free;
437         struct list_head rx_used;
438         int need_update;
439         struct iwl_rb_status *rb_stts;
440         dma_addr_t rb_stts_dma;
441         spinlock_t lock;
442 };
443
444 #define IWL_SUPPORTED_RATES_IE_LEN         8
445
446 #define MAX_TID_COUNT        9
447
448 #define IWL_INVALID_RATE     0xFF
449 #define IWL_INVALID_VALUE    -1
450
451 /**
452  * struct iwl_ht_agg -- aggregation status while waiting for block-ack
453  * @txq_id: Tx queue used for Tx attempt
454  * @frame_count: # frames attempted by Tx command
455  * @wait_for_ba: Expect block-ack before next Tx reply
456  * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
457  * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
458  * @bitmap1: High order, one bit for each frame pending ACK in Tx window
459  * @rate_n_flags: Rate at which Tx was attempted
460  *
461  * If REPLY_TX indicates that aggregation was attempted, driver must wait
462  * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
463  * until block ack arrives.
464  */
465 struct iwl_ht_agg {
466         u16 txq_id;
467         u16 frame_count;
468         u16 wait_for_ba;
469         u16 start_idx;
470         u64 bitmap;
471         u32 rate_n_flags;
472 #define IWL_AGG_OFF 0
473 #define IWL_AGG_ON 1
474 #define IWL_EMPTYING_HW_QUEUE_ADDBA 2
475 #define IWL_EMPTYING_HW_QUEUE_DELBA 3
476         u8 state;
477 };
478
479
480 struct iwl_tid_data {
481         u16 seq_number;
482         u16 tfds_in_queue;
483         struct iwl_ht_agg agg;
484 };
485
486 struct iwl_hw_key {
487         enum ieee80211_key_alg alg;
488         int keylen;
489         u8 keyidx;
490         u8 key[32];
491 };
492
493 union iwl_ht_rate_supp {
494         u16 rates;
495         struct {
496                 u8 siso_rate;
497                 u8 mimo_rate;
498         };
499 };
500
501 #define CFG_HT_RX_AMPDU_FACTOR_DEF  (0x3)
502
503 /*
504  * Maximal MPDU density for TX aggregation
505  * 4 - 2us density
506  * 5 - 4us density
507  * 6 - 8us density
508  * 7 - 16us density
509  */
510 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
511 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
512
513 struct iwl_ht_config {
514         /* self configuration data */
515         bool is_ht;
516         bool is_40mhz;
517         bool single_chain_sufficient;
518         u8 sm_ps;
519         /* BSS related data */
520         u8 extension_chan_offset;
521         u8 ht_protection;
522         u8 non_GF_STA_present;
523 };
524
525 union iwl_qos_capabity {
526         struct {
527                 u8 edca_count:4;        /* bit 0-3 */
528                 u8 q_ack:1;             /* bit 4 */
529                 u8 queue_request:1;     /* bit 5 */
530                 u8 txop_request:1;      /* bit 6 */
531                 u8 reserved:1;          /* bit 7 */
532         } q_AP;
533         struct {
534                 u8 acvo_APSD:1;         /* bit 0 */
535                 u8 acvi_APSD:1;         /* bit 1 */
536                 u8 ac_bk_APSD:1;        /* bit 2 */
537                 u8 ac_be_APSD:1;        /* bit 3 */
538                 u8 q_ack:1;             /* bit 4 */
539                 u8 max_len:2;           /* bit 5-6 */
540                 u8 more_data_ack:1;     /* bit 7 */
541         } q_STA;
542         u8 val;
543 };
544
545 /* QoS structures */
546 struct iwl_qos_info {
547         int qos_active;
548         union iwl_qos_capabity qos_cap;
549         struct iwl_qosparam_cmd def_qos_parm;
550 };
551
552 #define STA_PS_STATUS_WAKE             0
553 #define STA_PS_STATUS_SLEEP            1
554
555
556 struct iwl3945_station_entry {
557         struct iwl3945_addsta_cmd sta;
558         struct iwl_tid_data tid[MAX_TID_COUNT];
559         u8 used;
560         u8 ps_status;
561         struct iwl_hw_key keyinfo;
562 };
563
564 struct iwl_station_entry {
565         struct iwl_addsta_cmd sta;
566         struct iwl_tid_data tid[MAX_TID_COUNT];
567         u8 used;
568         u8 ps_status;
569         struct iwl_hw_key keyinfo;
570 };
571
572 /*
573  * iwl_station_priv: Driver's private station information
574  *
575  * When mac80211 creates a station it reserves some space (hw->sta_data_size)
576  * in the structure for use by driver. This structure is places in that
577  * space.
578  *
579  * At the moment use it for the station's rate scaling information.
580  */
581 struct iwl_station_priv {
582         struct iwl_lq_sta lq_sta;
583 };
584
585 /* one for each uCode image (inst/data, boot/init/runtime) */
586 struct fw_desc {
587         void *v_addr;           /* access by driver */
588         dma_addr_t p_addr;      /* access by card's busmaster DMA */
589         u32 len;                /* bytes */
590 };
591
592 /* uCode file layout */
593 struct iwl_ucode_header {
594         __le32 ver;     /* major/minor/API/serial */
595         union {
596                 struct {
597                         __le32 inst_size;       /* bytes of runtime code */
598                         __le32 data_size;       /* bytes of runtime data */
599                         __le32 init_size;       /* bytes of init code */
600                         __le32 init_data_size;  /* bytes of init data */
601                         __le32 boot_size;       /* bytes of bootstrap code */
602                         u8 data[0];             /* in same order as sizes */
603                 } v1;
604                 struct {
605                         __le32 build;           /* build number */
606                         __le32 inst_size;       /* bytes of runtime code */
607                         __le32 data_size;       /* bytes of runtime data */
608                         __le32 init_size;       /* bytes of init code */
609                         __le32 init_data_size;  /* bytes of init data */
610                         __le32 boot_size;       /* bytes of bootstrap code */
611                         u8 data[0];             /* in same order as sizes */
612                 } v2;
613         } u;
614 };
615 #define UCODE_HEADER_SIZE(ver) ((ver) == 1 ? 24 : 28)
616
617 struct iwl4965_ibss_seq {
618         u8 mac[ETH_ALEN];
619         u16 seq_num;
620         u16 frag_num;
621         unsigned long packet_time;
622         struct list_head list;
623 };
624
625 struct iwl_sensitivity_ranges {
626         u16 min_nrg_cck;
627         u16 max_nrg_cck;
628
629         u16 nrg_th_cck;
630         u16 nrg_th_ofdm;
631
632         u16 auto_corr_min_ofdm;
633         u16 auto_corr_min_ofdm_mrc;
634         u16 auto_corr_min_ofdm_x1;
635         u16 auto_corr_min_ofdm_mrc_x1;
636
637         u16 auto_corr_max_ofdm;
638         u16 auto_corr_max_ofdm_mrc;
639         u16 auto_corr_max_ofdm_x1;
640         u16 auto_corr_max_ofdm_mrc_x1;
641
642         u16 auto_corr_max_cck;
643         u16 auto_corr_max_cck_mrc;
644         u16 auto_corr_min_cck;
645         u16 auto_corr_min_cck_mrc;
646
647         u16 barker_corr_th_min;
648         u16 barker_corr_th_min_mrc;
649         u16 nrg_th_cca;
650 };
651
652
653 #define KELVIN_TO_CELSIUS(x) ((x)-273)
654 #define CELSIUS_TO_KELVIN(x) ((x)+273)
655
656
657 /**
658  * struct iwl_hw_params
659  * @max_txq_num: Max # Tx queues supported
660  * @dma_chnl_num: Number of Tx DMA/FIFO channels
661  * @scd_bc_tbls_size: size of scheduler byte count tables
662  * @tfd_size: TFD size
663  * @tx/rx_chains_num: Number of TX/RX chains
664  * @valid_tx/rx_ant: usable antennas
665  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
666  * @max_rxq_log: Log-base-2 of max_rxq_size
667  * @rx_page_order: Rx buffer page order
668  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
669  * @max_stations:
670  * @bcast_sta_id:
671  * @ht40_channel: is 40MHz width possible in band 2.4
672  * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
673  * @sw_crypto: 0 for hw, 1 for sw
674  * @max_xxx_size: for ucode uses
675  * @ct_kill_threshold: temperature threshold
676  * @calib_init_cfg: setup initial calibrations for the hw
677  * @struct iwl_sensitivity_ranges: range of sensitivity values
678  */
679 struct iwl_hw_params {
680         u8 max_txq_num;
681         u8 dma_chnl_num;
682         u16 scd_bc_tbls_size;
683         u32 tfd_size;
684         u8  tx_chains_num;
685         u8  rx_chains_num;
686         u8  valid_tx_ant;
687         u8  valid_rx_ant;
688         u16 max_rxq_size;
689         u16 max_rxq_log;
690         u32 rx_page_order;
691         u32 rx_wrt_ptr_reg;
692         u8  max_stations;
693         u8  bcast_sta_id;
694         u8  ht40_channel;
695         u8  max_beacon_itrvl;   /* in 1024 ms */
696         u32 max_inst_size;
697         u32 max_data_size;
698         u32 max_bsm_size;
699         u32 ct_kill_threshold; /* value in hw-dependent units */
700         u32 ct_kill_exit_threshold; /* value in hw-dependent units */
701                                     /* for 1000, 6000 series and up */
702         u32 calib_init_cfg;
703         const struct iwl_sensitivity_ranges *sens;
704 };
705
706
707 /******************************************************************************
708  *
709  * Functions implemented in core module which are forward declared here
710  * for use by iwl-[4-5].c
711  *
712  * NOTE:  The implementation of these functions are not hardware specific
713  * which is why they are in the core module files.
714  *
715  * Naming convention --
716  * iwl_         <-- Is part of iwlwifi
717  * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
718  * iwl4965_bg_      <-- Called from work queue context
719  * iwl4965_mac_     <-- mac80211 callback
720  *
721  ****************************************************************************/
722 extern void iwl_update_chain_flags(struct iwl_priv *priv);
723 extern int iwl_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src);
724 extern const u8 iwl_bcast_addr[ETH_ALEN];
725 extern int iwl_rxq_stop(struct iwl_priv *priv);
726 extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
727 extern int iwl_queue_space(const struct iwl_queue *q);
728 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
729 {
730         return q->write_ptr > q->read_ptr ?
731                 (i >= q->read_ptr && i < q->write_ptr) :
732                 !(i < q->read_ptr && i >= q->write_ptr);
733 }
734
735
736 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
737 {
738         /*
739          * This is for init calibration result and scan command which
740          * required buffer > TFD_MAX_PAYLOAD_SIZE,
741          * the big buffer at end of command array
742          */
743         if (is_huge)
744                 return q->n_window;     /* must be power of 2 */
745
746         /* Otherwise, use normal size buffers */
747         return index & (q->n_window - 1);
748 }
749
750
751 struct iwl_dma_ptr {
752         dma_addr_t dma;
753         void *addr;
754         size_t size;
755 };
756
757 #define IWL_OPERATION_MODE_AUTO     0
758 #define IWL_OPERATION_MODE_HT_ONLY  1
759 #define IWL_OPERATION_MODE_MIXED    2
760 #define IWL_OPERATION_MODE_20MHZ    3
761
762 #define IWL_TX_CRC_SIZE 4
763 #define IWL_TX_DELIMITER_SIZE 4
764
765 #define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
766
767 /* Sensitivity and chain noise calibration */
768 #define INITIALIZATION_VALUE            0xFFFF
769 #define IWL4965_CAL_NUM_BEACONS         20
770 #define IWL_CAL_NUM_BEACONS             16
771 #define MAXIMUM_ALLOWED_PATHLOSS        15
772
773 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
774
775 #define MAX_FA_OFDM  50
776 #define MIN_FA_OFDM  5
777 #define MAX_FA_CCK   50
778 #define MIN_FA_CCK   5
779
780 #define AUTO_CORR_STEP_OFDM       1
781
782 #define AUTO_CORR_STEP_CCK     3
783 #define AUTO_CORR_MAX_TH_CCK   160
784
785 #define NRG_DIFF               2
786 #define NRG_STEP_CCK           2
787 #define NRG_MARGIN             8
788 #define MAX_NUMBER_CCK_NO_FA 100
789
790 #define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
791
792 #define CHAIN_A             0
793 #define CHAIN_B             1
794 #define CHAIN_C             2
795 #define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
796 #define ALL_BAND_FILTER                 0xFF00
797 #define IN_BAND_FILTER                  0xFF
798 #define MIN_AVERAGE_NOISE_MAX_VALUE     0xFFFFFFFF
799
800 #define NRG_NUM_PREV_STAT_L     20
801 #define NUM_RX_CHAINS           3
802
803 enum iwl4965_false_alarm_state {
804         IWL_FA_TOO_MANY = 0,
805         IWL_FA_TOO_FEW = 1,
806         IWL_FA_GOOD_RANGE = 2,
807 };
808
809 enum iwl4965_chain_noise_state {
810         IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
811         IWL_CHAIN_NOISE_ACCUMULATE,
812         IWL_CHAIN_NOISE_CALIBRATED,
813         IWL_CHAIN_NOISE_DONE,
814 };
815
816 enum iwl4965_calib_enabled_state {
817         IWL_CALIB_DISABLED = 0,  /* must be 0 */
818         IWL_CALIB_ENABLED = 1,
819 };
820
821
822 /*
823  * enum iwl_calib
824  * defines the order in which results of initial calibrations
825  * should be sent to the runtime uCode
826  */
827 enum iwl_calib {
828         IWL_CALIB_XTAL,
829         IWL_CALIB_DC,
830         IWL_CALIB_LO,
831         IWL_CALIB_TX_IQ,
832         IWL_CALIB_TX_IQ_PERD,
833         IWL_CALIB_BASE_BAND,
834         IWL_CALIB_MAX
835 };
836
837 /* Opaque calibration results */
838 struct iwl_calib_result {
839         void *buf;
840         size_t buf_len;
841 };
842
843 enum ucode_type {
844         UCODE_NONE = 0,
845         UCODE_INIT,
846         UCODE_RT
847 };
848
849 /* Sensitivity calib data */
850 struct iwl_sensitivity_data {
851         u32 auto_corr_ofdm;
852         u32 auto_corr_ofdm_mrc;
853         u32 auto_corr_ofdm_x1;
854         u32 auto_corr_ofdm_mrc_x1;
855         u32 auto_corr_cck;
856         u32 auto_corr_cck_mrc;
857
858         u32 last_bad_plcp_cnt_ofdm;
859         u32 last_fa_cnt_ofdm;
860         u32 last_bad_plcp_cnt_cck;
861         u32 last_fa_cnt_cck;
862
863         u32 nrg_curr_state;
864         u32 nrg_prev_state;
865         u32 nrg_value[10];
866         u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
867         u32 nrg_silence_ref;
868         u32 nrg_energy_idx;
869         u32 nrg_silence_idx;
870         u32 nrg_th_cck;
871         s32 nrg_auto_corr_silence_diff;
872         u32 num_in_cck_no_fa;
873         u32 nrg_th_ofdm;
874
875         u16 barker_corr_th_min;
876         u16 barker_corr_th_min_mrc;
877         u16 nrg_th_cca;
878 };
879
880 /* Chain noise (differential Rx gain) calib data */
881 struct iwl_chain_noise_data {
882         u32 active_chains;
883         u32 chain_noise_a;
884         u32 chain_noise_b;
885         u32 chain_noise_c;
886         u32 chain_signal_a;
887         u32 chain_signal_b;
888         u32 chain_signal_c;
889         u16 beacon_count;
890         u8 disconn_array[NUM_RX_CHAINS];
891         u8 delta_gain_code[NUM_RX_CHAINS];
892         u8 radio_write;
893         u8 state;
894 };
895
896 #define EEPROM_SEM_TIMEOUT 10           /* milliseconds */
897 #define EEPROM_SEM_RETRY_LIMIT 1000     /* number of attempts (not time) */
898
899 #define IWL_TRAFFIC_ENTRIES     (256)
900 #define IWL_TRAFFIC_ENTRY_SIZE  (64)
901
902 enum {
903         MEASUREMENT_READY = (1 << 0),
904         MEASUREMENT_ACTIVE = (1 << 1),
905 };
906
907 enum iwl_nvm_type {
908         NVM_DEVICE_TYPE_EEPROM = 0,
909         NVM_DEVICE_TYPE_OTP,
910 };
911
912 /*
913  * Two types of OTP memory access modes
914  *   IWL_OTP_ACCESS_ABSOLUTE - absolute address mode,
915  *                              based on physical memory addressing
916  *   IWL_OTP_ACCESS_RELATIVE - relative address mode,
917  *                             based on logical memory addressing
918  */
919 enum iwl_access_mode {
920         IWL_OTP_ACCESS_ABSOLUTE,
921         IWL_OTP_ACCESS_RELATIVE,
922 };
923
924 /**
925  * enum iwl_pa_type - Power Amplifier type
926  * @IWL_PA_SYSTEM:  based on uCode configuration
927  * @IWL_PA_INTERNAL: use Internal only
928  */
929 enum iwl_pa_type {
930         IWL_PA_SYSTEM = 0,
931         IWL_PA_INTERNAL = 1,
932 };
933
934 /* interrupt statistics */
935 struct isr_statistics {
936         u32 hw;
937         u32 sw;
938         u32 sw_err;
939         u32 sch;
940         u32 alive;
941         u32 rfkill;
942         u32 ctkill;
943         u32 wakeup;
944         u32 rx;
945         u32 rx_handlers[REPLY_MAX];
946         u32 tx;
947         u32 unhandled;
948 };
949
950 #ifdef CONFIG_IWLWIFI_DEBUGFS
951 /* management statistics */
952 enum iwl_mgmt_stats {
953         MANAGEMENT_ASSOC_REQ = 0,
954         MANAGEMENT_ASSOC_RESP,
955         MANAGEMENT_REASSOC_REQ,
956         MANAGEMENT_REASSOC_RESP,
957         MANAGEMENT_PROBE_REQ,
958         MANAGEMENT_PROBE_RESP,
959         MANAGEMENT_BEACON,
960         MANAGEMENT_ATIM,
961         MANAGEMENT_DISASSOC,
962         MANAGEMENT_AUTH,
963         MANAGEMENT_DEAUTH,
964         MANAGEMENT_ACTION,
965         MANAGEMENT_MAX,
966 };
967 /* control statistics */
968 enum iwl_ctrl_stats {
969         CONTROL_BACK_REQ =  0,
970         CONTROL_BACK,
971         CONTROL_PSPOLL,
972         CONTROL_RTS,
973         CONTROL_CTS,
974         CONTROL_ACK,
975         CONTROL_CFEND,
976         CONTROL_CFENDACK,
977         CONTROL_MAX,
978 };
979
980 struct traffic_stats {
981         u32 mgmt[MANAGEMENT_MAX];
982         u32 ctrl[CONTROL_MAX];
983         u32 data_cnt;
984         u64 data_bytes;
985 };
986 #else
987 struct traffic_stats {
988         u64 data_bytes;
989 };
990 #endif
991
992 /*
993  * iwl_switch_rxon: "channel switch" structure
994  *
995  * @ switch_in_progress: channel switch in progress
996  * @ channel: new channel
997  */
998 struct iwl_switch_rxon {
999         bool switch_in_progress;
1000         __le16 channel;
1001 };
1002
1003 struct iwl_priv {
1004
1005         /* ieee device used by generic ieee processing code */
1006         struct ieee80211_hw *hw;
1007         struct ieee80211_channel *ieee_channels;
1008         struct ieee80211_rate *ieee_rates;
1009         struct iwl_cfg *cfg;
1010
1011         /* temporary frame storage list */
1012         struct list_head free_frames;
1013         int frames_count;
1014
1015         enum ieee80211_band band;
1016         int alloc_rxb_page;
1017
1018         void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
1019                                        struct iwl_rx_mem_buffer *rxb);
1020
1021         struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
1022
1023 #if defined(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) || defined(CONFIG_IWL3945_SPECTRUM_MEASUREMENT)
1024         /* spectrum measurement report caching */
1025         struct iwl_spectrum_notification measure_report;
1026         u8 measurement_status;
1027 #endif
1028         /* ucode beacon time */
1029         u32 ucode_beacon_time;
1030
1031         /* we allocate array of iwl4965_channel_info for NIC's valid channels.
1032          *    Access via channel # using indirect index array */
1033         struct iwl_channel_info *channel_info;  /* channel info array */
1034         u8 channel_count;       /* # of channels */
1035
1036         /* each calibration channel group in the EEPROM has a derived
1037          * clip setting for each rate. 3945 only.*/
1038         const struct iwl3945_clip_group clip39_groups[5];
1039
1040         /* thermal calibration */
1041         s32 temperature;        /* degrees Kelvin */
1042         s32 last_temperature;
1043
1044         /* init calibration results */
1045         struct iwl_calib_result calib_results[IWL_CALIB_MAX];
1046
1047         /* Scan related variables */
1048         unsigned long last_scan_jiffies;
1049         unsigned long next_scan_jiffies;
1050         unsigned long scan_start;
1051         unsigned long scan_pass_start;
1052         unsigned long scan_start_tsf;
1053         void *scan;
1054         int scan_bands;
1055         struct cfg80211_scan_request *scan_request;
1056         u8 scan_tx_ant[IEEE80211_NUM_BANDS];
1057         u8 mgmt_tx_ant;
1058
1059         /* spinlock */
1060         spinlock_t lock;        /* protect general shared data */
1061         spinlock_t hcmd_lock;   /* protect hcmd */
1062         spinlock_t reg_lock;    /* protect hw register access */
1063         struct mutex mutex;
1064
1065         /* basic pci-network driver stuff */
1066         struct pci_dev *pci_dev;
1067
1068         /* pci hardware address support */
1069         void __iomem *hw_base;
1070         u32  hw_rev;
1071         u32  hw_wa_rev;
1072         u8   rev_id;
1073
1074         /* uCode images, save to reload in case of failure */
1075         u32 ucode_ver;                  /* version of ucode, copy of
1076                                            iwl_ucode.ver */
1077         struct fw_desc ucode_code;      /* runtime inst */
1078         struct fw_desc ucode_data;      /* runtime data original */
1079         struct fw_desc ucode_data_backup;       /* runtime data save/restore */
1080         struct fw_desc ucode_init;      /* initialization inst */
1081         struct fw_desc ucode_init_data; /* initialization data */
1082         struct fw_desc ucode_boot;      /* bootstrap inst */
1083         enum ucode_type ucode_type;
1084         u8 ucode_write_complete;        /* the image write is complete */
1085
1086
1087         struct iwl_rxon_time_cmd rxon_timing;
1088
1089         /* We declare this const so it can only be
1090          * changed via explicit cast within the
1091          * routines that actually update the physical
1092          * hardware */
1093         const struct iwl_rxon_cmd active_rxon;
1094         struct iwl_rxon_cmd staging_rxon;
1095
1096         struct iwl_switch_rxon switch_rxon;
1097
1098         /* 1st responses from initialize and runtime uCode images.
1099          * 4965's initialize alive response contains some calibration data. */
1100         struct iwl_init_alive_resp card_alive_init;
1101         struct iwl_alive_resp card_alive;
1102
1103         unsigned long last_blink_time;
1104         u8 last_blink_rate;
1105         u8 allow_blinking;
1106         u64 led_tpt;
1107
1108         u16 active_rate;
1109         u16 active_rate_basic;
1110
1111         u8 assoc_station_added;
1112         u8 start_calib;
1113         struct iwl_sensitivity_data sensitivity_data;
1114         struct iwl_chain_noise_data chain_noise_data;
1115         __le16 sensitivity_tbl[HD_TABLE_SIZE];
1116
1117         struct iwl_ht_config current_ht_config;
1118         u8 last_phy_res[100];
1119
1120         /* Rate scaling data */
1121         u8 retry_rate;
1122
1123         wait_queue_head_t wait_command_queue;
1124
1125         int activity_timer_active;
1126
1127         /* Rx and Tx DMA processing queues */
1128         struct iwl_rx_queue rxq;
1129         struct iwl_tx_queue *txq;
1130         unsigned long txq_ctx_active_msk;
1131         struct iwl_dma_ptr  kw; /* keep warm address */
1132         struct iwl_dma_ptr  scd_bc_tbls;
1133
1134         u32 scd_base_addr;      /* scheduler sram base address */
1135
1136         unsigned long status;
1137
1138         int last_rx_rssi;       /* From Rx packet statistics */
1139         int last_rx_noise;      /* From beacon statistics */
1140
1141         /* counts mgmt, ctl, and data packets */
1142         struct traffic_stats tx_stats;
1143         struct traffic_stats rx_stats;
1144
1145         /* counts interrupts */
1146         struct isr_statistics isr_stats;
1147
1148         struct iwl_power_mgr power_data;
1149         struct iwl_tt_mgmt thermal_throttle;
1150
1151         struct iwl_notif_statistics statistics;
1152 #ifdef CONFIG_IWLWIFI_DEBUG
1153         struct iwl_notif_statistics accum_statistics;
1154 #endif
1155
1156         /* context information */
1157         u16 rates_mask;
1158
1159         u8 bssid[ETH_ALEN];
1160         u16 rts_threshold;
1161         u8 mac_addr[ETH_ALEN];
1162
1163         /*station table variables */
1164         spinlock_t sta_lock;
1165         int num_stations;
1166         struct iwl_station_entry stations[IWL_STATION_COUNT];
1167         struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
1168         u8 default_wep_key;
1169         u8 key_mapping_key;
1170         unsigned long ucode_key_table;
1171
1172         /* queue refcounts */
1173 #define IWL_MAX_HW_QUEUES       32
1174         unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
1175         /* for each AC */
1176         atomic_t queue_stop_count[4];
1177
1178         /* Indication if ieee80211_ops->open has been called */
1179         u8 is_open;
1180
1181         u8 mac80211_registered;
1182
1183         /* Rx'd packet timing information */
1184         u32 last_beacon_time;
1185         u64 last_tsf;
1186
1187         /* eeprom */
1188         u8 *eeprom;
1189         int    nvm_device_type;
1190         struct iwl_eeprom_calib_info *calib_info;
1191
1192         enum nl80211_iftype iw_mode;
1193
1194         struct sk_buff *ibss_beacon;
1195
1196         /* Last Rx'd beacon timestamp */
1197         u64 timestamp;
1198         u16 beacon_int;
1199         struct ieee80211_vif *vif;
1200
1201         /*Added for 3945 */
1202         void *shared_virt;
1203         dma_addr_t shared_phys;
1204         /*End*/
1205         struct iwl_hw_params hw_params;
1206
1207         /* INT ICT Table */
1208         __le32 *ict_tbl;
1209         dma_addr_t ict_tbl_dma;
1210         dma_addr_t aligned_ict_tbl_dma;
1211         int ict_index;
1212         void *ict_tbl_vir;
1213         u32 inta;
1214         bool use_ict;
1215
1216         u32 inta_mask;
1217         /* Current association information needed to configure the
1218          * hardware */
1219         u16 assoc_id;
1220         u16 assoc_capability;
1221
1222         struct iwl_qos_info qos_data;
1223
1224         struct workqueue_struct *workqueue;
1225
1226         struct work_struct up;
1227         struct work_struct restart;
1228         struct work_struct calibrated_work;
1229         struct work_struct scan_completed;
1230         struct work_struct rx_replenish;
1231         struct work_struct abort_scan;
1232         struct work_struct update_link_led;
1233         struct work_struct auth_work;
1234         struct work_struct report_work;
1235         struct work_struct request_scan;
1236         struct work_struct beacon_update;
1237         struct work_struct tt_work;
1238         struct work_struct ct_enter;
1239         struct work_struct ct_exit;
1240
1241         struct tasklet_struct irq_tasklet;
1242
1243         struct delayed_work init_alive_start;
1244         struct delayed_work alive_start;
1245         struct delayed_work scan_check;
1246
1247         /*For 3945 only*/
1248         struct delayed_work thermal_periodic;
1249         struct delayed_work rfkill_poll;
1250
1251         /* TX Power */
1252         s8 tx_power_user_lmt;
1253         s8 tx_power_device_lmt;
1254
1255
1256 #ifdef CONFIG_IWLWIFI_DEBUG
1257         /* debugging info */
1258         u32 debug_level; /* per device debugging will override global
1259                             iwl_debug_level if set */
1260         u32 framecnt_to_us;
1261         atomic_t restrict_refcnt;
1262         bool disable_ht40;
1263 #ifdef CONFIG_IWLWIFI_DEBUGFS
1264         /* debugfs */
1265         u16 tx_traffic_idx;
1266         u16 rx_traffic_idx;
1267         u8 *tx_traffic;
1268         u8 *rx_traffic;
1269         struct iwl_debugfs *dbgfs;
1270 #endif /* CONFIG_IWLWIFI_DEBUGFS */
1271 #endif /* CONFIG_IWLWIFI_DEBUG */
1272
1273         struct work_struct txpower_work;
1274         u32 disable_sens_cal;
1275         u32 disable_chain_noise_cal;
1276         u32 disable_tx_power_cal;
1277         struct work_struct run_time_calib_work;
1278         struct timer_list statistics_periodic;
1279         bool hw_ready;
1280         /*For 3945*/
1281 #define IWL_DEFAULT_TX_POWER 0x0F
1282
1283         struct iwl3945_notif_statistics statistics_39;
1284
1285         u32 sta_supp_rates;
1286 }; /*iwl_priv */
1287
1288 static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
1289 {
1290         set_bit(txq_id, &priv->txq_ctx_active_msk);
1291 }
1292
1293 static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
1294 {
1295         clear_bit(txq_id, &priv->txq_ctx_active_msk);
1296 }
1297
1298 #ifdef CONFIG_IWLWIFI_DEBUG
1299 const char *iwl_get_tx_fail_reason(u32 status);
1300 /*
1301  * iwl_get_debug_level: Return active debug level for device
1302  *
1303  * Using sysfs it is possible to set per device debug level. This debug
1304  * level will be used if set, otherwise the global debug level which can be
1305  * set via module parameter is used.
1306  */
1307 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1308 {
1309         if (priv->debug_level)
1310                 return priv->debug_level;
1311         else
1312                 return iwl_debug_level;
1313 }
1314 #else
1315 static inline const char *iwl_get_tx_fail_reason(u32 status) { return ""; }
1316
1317 static inline u32 iwl_get_debug_level(struct iwl_priv *priv)
1318 {
1319         return iwl_debug_level;
1320 }
1321 #endif
1322
1323
1324 static inline struct ieee80211_hdr *iwl_tx_queue_get_hdr(struct iwl_priv *priv,
1325                                                          int txq_id, int idx)
1326 {
1327         if (priv->txq[txq_id].txb[idx].skb[0])
1328                 return (struct ieee80211_hdr *)priv->txq[txq_id].
1329                                 txb[idx].skb[0]->data;
1330         return NULL;
1331 }
1332
1333
1334 static inline int iwl_is_associated(struct iwl_priv *priv)
1335 {
1336         return (priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
1337 }
1338
1339 static inline int is_channel_valid(const struct iwl_channel_info *ch_info)
1340 {
1341         if (ch_info == NULL)
1342                 return 0;
1343         return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
1344 }
1345
1346 static inline int is_channel_radar(const struct iwl_channel_info *ch_info)
1347 {
1348         return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
1349 }
1350
1351 static inline u8 is_channel_a_band(const struct iwl_channel_info *ch_info)
1352 {
1353         return ch_info->band == IEEE80211_BAND_5GHZ;
1354 }
1355
1356 static inline u8 is_channel_bg_band(const struct iwl_channel_info *ch_info)
1357 {
1358         return ch_info->band == IEEE80211_BAND_2GHZ;
1359 }
1360
1361 static inline int is_channel_passive(const struct iwl_channel_info *ch)
1362 {
1363         return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
1364 }
1365
1366 static inline int is_channel_ibss(const struct iwl_channel_info *ch)
1367 {
1368         return ((ch->flags & EEPROM_CHANNEL_IBSS)) ? 1 : 0;
1369 }
1370
1371 #endif                          /* __iwl_dev_h__ */