]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/wireless/iwlwifi/iwl-power.c
iwlwifi: disable powersave for 4965
[karo-tx-linux.git] / drivers / net / wireless / iwlwifi / iwl-power.c
1 /******************************************************************************
2  *
3  * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
4  *
5  * Portions of this file are derived from the ipw3945 project, as well
6  * as portions of the ieee80211 subsystem header files.
7  *
8  * This program is free software; you can redistribute it and/or modify it
9  * under the terms of version 2 of the GNU General Public License as
10  * published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but WITHOUT
13  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
15  * more details.
16  *
17  * You should have received a copy of the GNU General Public License along with
18  * this program; if not, write to the Free Software Foundation, Inc.,
19  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
20  *
21  * The full GNU General Public License is included in this distribution in the
22  * file called LICENSE.
23  *
24  * Contact Information:
25  *  Intel Linux Wireless <ilw@linux.intel.com>
26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
27  *****************************************************************************/
28
29
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/init.h>
33
34 #include <net/mac80211.h>
35
36 #include "iwl-eeprom.h"
37 #include "iwl-dev.h"
38 #include "iwl-core.h"
39 #include "iwl-io.h"
40 #include "iwl-commands.h"
41 #include "iwl-debug.h"
42 #include "iwl-power.h"
43
44 /*
45  * Setting power level allows the card to go to sleep when not busy.
46  *
47  * We calculate a sleep command based on the required latency, which
48  * we get from mac80211. In order to handle thermal throttling, we can
49  * also use pre-defined power levels.
50  */
51
52 /*
53  * For now, keep using power level 1 instead of automatically
54  * adjusting ...
55  */
56 bool no_sleep_autoadjust = true;
57 module_param(no_sleep_autoadjust, bool, S_IRUGO);
58 MODULE_PARM_DESC(no_sleep_autoadjust,
59                  "don't automatically adjust sleep level "
60                  "according to maximum network latency");
61
62 /*
63  * This defines the old power levels. They are still used by default
64  * (level 1) and for thermal throttle (levels 3 through 5)
65  */
66
67 struct iwl_power_vec_entry {
68         struct iwl_powertable_cmd cmd;
69         u8 no_dtim;
70 };
71
72 #define IWL_DTIM_RANGE_0_MAX    2
73 #define IWL_DTIM_RANGE_1_MAX    10
74
75 #define NOSLP cpu_to_le16(0), 0, 0
76 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
77 #define TU_TO_USEC 1024
78 #define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
79 #define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
80                                      cpu_to_le32(X1), \
81                                      cpu_to_le32(X2), \
82                                      cpu_to_le32(X3), \
83                                      cpu_to_le32(X4)}
84 /* default power management (not Tx power) table values */
85 /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
86 static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
87         {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
88         {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
89         {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
90         {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
91         {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
92 };
93
94
95 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
96 static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
97         {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
98         {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
99         {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
100         {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
101         {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
102 };
103
104 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
105 static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
106         {{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
107         {{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
108         {{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
109         {{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
110         {{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
111 };
112
113 static void iwl_static_sleep_cmd(struct iwl_priv *priv,
114                                  struct iwl_powertable_cmd *cmd,
115                                  enum iwl_power_level lvl, int period)
116 {
117         const struct iwl_power_vec_entry *table;
118         int max_sleep, i;
119         bool skip;
120
121         table = range_2;
122         if (period < IWL_DTIM_RANGE_1_MAX)
123                 table = range_1;
124         if (period < IWL_DTIM_RANGE_0_MAX)
125                 table = range_0;
126
127         BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
128
129         *cmd = table[lvl].cmd;
130
131         if (period == 0) {
132                 skip = false;
133                 period = 1;
134         } else {
135                 skip = !!table[lvl].no_dtim;
136         }
137
138         if (skip) {
139                 __le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
140                 max_sleep = le32_to_cpu(slp_itrvl);
141                 if (max_sleep == 0xFF)
142                         max_sleep = period * (skip + 1);
143                 else if (max_sleep > period)
144                         max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
145                 cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
146         } else {
147                 max_sleep = period;
148                 cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
149         }
150
151         for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
152                 if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
153                         cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
154
155         if (priv->power_data.pci_pm)
156                 cmd->flags |= IWL_POWER_PCI_PM_MSK;
157         else
158                 cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
159
160         IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
161 }
162
163 /* default Thermal Throttling transaction table
164  * Current state   |         Throttling Down               |  Throttling Up
165  *=============================================================================
166  *                 Condition Nxt State  Condition Nxt State Condition Nxt State
167  *-----------------------------------------------------------------------------
168  *     IWL_TI_0     T >= 115   CT_KILL  115>T>=105   TI_1      N/A      N/A
169  *     IWL_TI_1     T >= 115   CT_KILL  115>T>=110   TI_2     T<=95     TI_0
170  *     IWL_TI_2     T >= 115   CT_KILL                        T<=100    TI_1
171  *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
172  *=============================================================================
173  */
174 static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
175         {IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
176         {IWL_TI_1, 105, CT_KILL_THRESHOLD},
177         {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
178 };
179 static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
180         {IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
181         {IWL_TI_2, 110, CT_KILL_THRESHOLD},
182         {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
183 };
184 static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
185         {IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
186         {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
187         {IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
188 };
189 static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
190         {IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
191         {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
192         {IWL_TI_CT_KILL, CT_KILL_EXIT_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
193 };
194
195 /* Advance Thermal Throttling default restriction table */
196 static const struct iwl_tt_restriction restriction_range[IWL_TI_STATE_MAX] = {
197         {IWL_ANT_OK_MULTI, IWL_ANT_OK_MULTI, true },
198         {IWL_ANT_OK_SINGLE, IWL_ANT_OK_MULTI, true },
199         {IWL_ANT_OK_SINGLE, IWL_ANT_OK_SINGLE, false },
200         {IWL_ANT_OK_NONE, IWL_ANT_OK_NONE, false }
201 };
202
203
204 static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
205                                     struct iwl_powertable_cmd *cmd)
206 {
207         memset(cmd, 0, sizeof(*cmd));
208
209         if (priv->power_data.pci_pm)
210                 cmd->flags |= IWL_POWER_PCI_PM_MSK;
211
212         IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
213 }
214
215 static void iwl_power_fill_sleep_cmd(struct iwl_priv *priv,
216                                      struct iwl_powertable_cmd *cmd,
217                                      int dynps_ms, int wakeup_period)
218 {
219         /*
220          * These are the original power level 3 sleep successions. The
221          * device may behave better with such succession and was also
222          * only tested with that. Just like the original sleep commands,
223          * also adjust the succession here to the wakeup_period below.
224          * The ranges are the same as for the sleep commands, 0-2, 3-9
225          * and >10, which is selected based on the DTIM interval for
226          * the sleep index but here we use the wakeup period since that
227          * is what we need to do for the latency requirements.
228          */
229         static const u8 slp_succ_r0[IWL_POWER_VEC_SIZE] = { 2, 2, 2, 2, 2 };
230         static const u8 slp_succ_r1[IWL_POWER_VEC_SIZE] = { 2, 4, 6, 7, 9 };
231         static const u8 slp_succ_r2[IWL_POWER_VEC_SIZE] = { 2, 7, 9, 9, 0xFF };
232         const u8 *slp_succ = slp_succ_r0;
233         int i;
234
235         if (wakeup_period > IWL_DTIM_RANGE_0_MAX)
236                 slp_succ = slp_succ_r1;
237         if (wakeup_period > IWL_DTIM_RANGE_1_MAX)
238                 slp_succ = slp_succ_r2;
239
240         memset(cmd, 0, sizeof(*cmd));
241
242         cmd->flags = IWL_POWER_DRIVER_ALLOW_SLEEP_MSK |
243                      IWL_POWER_FAST_PD; /* no use seeing frames for others */
244
245         if (priv->power_data.pci_pm)
246                 cmd->flags |= IWL_POWER_PCI_PM_MSK;
247
248         cmd->rx_data_timeout = cpu_to_le32(1000 * dynps_ms);
249         cmd->tx_data_timeout = cpu_to_le32(1000 * dynps_ms);
250
251         for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
252                 cmd->sleep_interval[i] =
253                         cpu_to_le32(min_t(int, slp_succ[i], wakeup_period));
254
255         IWL_DEBUG_POWER(priv, "Automatic sleep command\n");
256 }
257
258 static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
259 {
260         IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
261         IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
262         IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
263         IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
264         IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
265                         le32_to_cpu(cmd->sleep_interval[0]),
266                         le32_to_cpu(cmd->sleep_interval[1]),
267                         le32_to_cpu(cmd->sleep_interval[2]),
268                         le32_to_cpu(cmd->sleep_interval[3]),
269                         le32_to_cpu(cmd->sleep_interval[4]));
270
271         return iwl_send_cmd_pdu(priv, POWER_TABLE_CMD,
272                                 sizeof(struct iwl_powertable_cmd), cmd);
273 }
274
275
276 int iwl_power_update_mode(struct iwl_priv *priv, bool force)
277 {
278         int ret = 0;
279         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
280         bool enabled = (priv->iw_mode == NL80211_IFTYPE_STATION) &&
281                         (priv->hw->conf.flags & IEEE80211_CONF_PS);
282         bool update_chains;
283         struct iwl_powertable_cmd cmd;
284         int dtimper;
285
286         /* Don't update the RX chain when chain noise calibration is running */
287         update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
288                         priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;
289
290         if (priv->vif)
291                 dtimper = priv->vif->bss_conf.dtim_period;
292         else
293                 dtimper = 1;
294
295         if (priv->cfg->broken_powersave)
296                 iwl_power_sleep_cam_cmd(priv, &cmd);
297         else if (tt->state >= IWL_TI_1)
298                 iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper);
299         else if (!enabled)
300                 iwl_power_sleep_cam_cmd(priv, &cmd);
301         else if (priv->power_data.debug_sleep_level_override >= 0)
302                 iwl_static_sleep_cmd(priv, &cmd,
303                                      priv->power_data.debug_sleep_level_override,
304                                      dtimper);
305         else if (no_sleep_autoadjust)
306                 iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_1, dtimper);
307         else
308                 iwl_power_fill_sleep_cmd(priv, &cmd,
309                                          priv->hw->conf.dynamic_ps_timeout,
310                                          priv->hw->conf.max_sleep_period);
311
312         if (iwl_is_ready_rf(priv) &&
313             (memcmp(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd)) || force)) {
314                 if (cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
315                         set_bit(STATUS_POWER_PMI, &priv->status);
316
317                 ret = iwl_set_power(priv, &cmd);
318                 if (!ret) {
319                         if (!(cmd.flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
320                                 clear_bit(STATUS_POWER_PMI, &priv->status);
321
322                         if (priv->cfg->ops->lib->update_chain_flags &&
323                             update_chains)
324                                 priv->cfg->ops->lib->update_chain_flags(priv);
325                         else if (priv->cfg->ops->lib->update_chain_flags)
326                                 IWL_DEBUG_POWER(priv,
327                                         "Cannot update the power, chain noise "
328                                         "calibration running: %d\n",
329                                         priv->chain_noise_data.state);
330                         memcpy(&priv->power_data.sleep_cmd, &cmd, sizeof(cmd));
331                 } else
332                         IWL_ERR(priv, "set power fail, ret = %d", ret);
333         }
334
335         return ret;
336 }
337 EXPORT_SYMBOL(iwl_power_update_mode);
338
339 bool iwl_ht_enabled(struct iwl_priv *priv)
340 {
341         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
342         struct iwl_tt_restriction *restriction;
343
344         if (!priv->thermal_throttle.advanced_tt)
345                 return true;
346         restriction = tt->restriction + tt->state;
347         return restriction->is_ht;
348 }
349 EXPORT_SYMBOL(iwl_ht_enabled);
350
351 enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
352 {
353         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
354         struct iwl_tt_restriction *restriction;
355
356         if (!priv->thermal_throttle.advanced_tt)
357                 return IWL_ANT_OK_MULTI;
358         restriction = tt->restriction + tt->state;
359         return restriction->tx_stream;
360 }
361 EXPORT_SYMBOL(iwl_tx_ant_restriction);
362
363 enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv)
364 {
365         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
366         struct iwl_tt_restriction *restriction;
367
368         if (!priv->thermal_throttle.advanced_tt)
369                 return IWL_ANT_OK_MULTI;
370         restriction = tt->restriction + tt->state;
371         return restriction->rx_stream;
372 }
373
374 #define CT_KILL_EXIT_DURATION (5)       /* 5 seconds duration */
375
376 /*
377  * toggle the bit to wake up uCode and check the temperature
378  * if the temperature is below CT, uCode will stay awake and send card
379  * state notification with CT_KILL bit clear to inform Thermal Throttling
380  * Management to change state. Otherwise, uCode will go back to sleep
381  * without doing anything, driver should continue the 5 seconds timer
382  * to wake up uCode for temperature check until temperature drop below CT
383  */
384 static void iwl_tt_check_exit_ct_kill(unsigned long data)
385 {
386         struct iwl_priv *priv = (struct iwl_priv *)data;
387         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
388         unsigned long flags;
389
390         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
391                 return;
392
393         if (tt->state == IWL_TI_CT_KILL) {
394                 if (priv->thermal_throttle.ct_kill_toggle) {
395                         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
396                                     CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
397                         priv->thermal_throttle.ct_kill_toggle = false;
398                 } else {
399                         iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
400                                     CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
401                         priv->thermal_throttle.ct_kill_toggle = true;
402                 }
403                 iwl_read32(priv, CSR_UCODE_DRV_GP1);
404                 spin_lock_irqsave(&priv->reg_lock, flags);
405                 if (!iwl_grab_nic_access(priv))
406                         iwl_release_nic_access(priv);
407                 spin_unlock_irqrestore(&priv->reg_lock, flags);
408
409                 /* Reschedule the ct_kill timer to occur in
410                  * CT_KILL_EXIT_DURATION seconds to ensure we get a
411                  * thermal update */
412                 mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
413                           CT_KILL_EXIT_DURATION * HZ);
414         }
415 }
416
417 static void iwl_perform_ct_kill_task(struct iwl_priv *priv,
418                            bool stop)
419 {
420         if (stop) {
421                 IWL_DEBUG_POWER(priv, "Stop all queues\n");
422                 if (priv->mac80211_registered)
423                         ieee80211_stop_queues(priv->hw);
424                 IWL_DEBUG_POWER(priv,
425                                 "Schedule 5 seconds CT_KILL Timer\n");
426                 mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
427                           CT_KILL_EXIT_DURATION * HZ);
428         } else {
429                 IWL_DEBUG_POWER(priv, "Wake all queues\n");
430                 if (priv->mac80211_registered)
431                         ieee80211_wake_queues(priv->hw);
432         }
433 }
434
435 #define IWL_MINIMAL_POWER_THRESHOLD             (CT_KILL_THRESHOLD_LEGACY)
436 #define IWL_REDUCED_PERFORMANCE_THRESHOLD_2     (100)
437 #define IWL_REDUCED_PERFORMANCE_THRESHOLD_1     (90)
438
439 /*
440  * Legacy thermal throttling
441  * 1) Avoid NIC destruction due to high temperatures
442  *      Chip will identify dangerously high temperatures that can
443  *      harm the device and will power down
444  * 2) Avoid the NIC power down due to high temperature
445  *      Throttle early enough to lower the power consumption before
446  *      drastic steps are needed
447  */
448 static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp)
449 {
450         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
451         enum iwl_tt_state old_state;
452
453 #ifdef CONFIG_IWLWIFI_DEBUG
454         if ((tt->tt_previous_temp) &&
455             (temp > tt->tt_previous_temp) &&
456             ((temp - tt->tt_previous_temp) >
457             IWL_TT_INCREASE_MARGIN)) {
458                 IWL_DEBUG_POWER(priv,
459                         "Temperature increase %d degree Celsius\n",
460                         (temp - tt->tt_previous_temp));
461         }
462 #endif
463         old_state = tt->state;
464         /* in Celsius */
465         if (temp >= IWL_MINIMAL_POWER_THRESHOLD)
466                 tt->state = IWL_TI_CT_KILL;
467         else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_2)
468                 tt->state = IWL_TI_2;
469         else if (temp >= IWL_REDUCED_PERFORMANCE_THRESHOLD_1)
470                 tt->state = IWL_TI_1;
471         else
472                 tt->state = IWL_TI_0;
473
474 #ifdef CONFIG_IWLWIFI_DEBUG
475         tt->tt_previous_temp = temp;
476 #endif
477         if (tt->state != old_state) {
478                 switch (tt->state) {
479                 case IWL_TI_0:
480                         /*
481                          * When the system is ready to go back to IWL_TI_0
482                          * we only have to call iwl_power_update_mode() to
483                          * do so.
484                          */
485                         break;
486                 case IWL_TI_1:
487                         tt->tt_power_mode = IWL_POWER_INDEX_3;
488                         break;
489                 case IWL_TI_2:
490                         tt->tt_power_mode = IWL_POWER_INDEX_4;
491                         break;
492                 default:
493                         tt->tt_power_mode = IWL_POWER_INDEX_5;
494                         break;
495                 }
496                 mutex_lock(&priv->mutex);
497                 if (iwl_power_update_mode(priv, true)) {
498                         /* TT state not updated
499                          * try again during next temperature read
500                          */
501                         tt->state = old_state;
502                         IWL_ERR(priv, "Cannot update power mode, "
503                                         "TT state not updated\n");
504                 } else {
505                         if (tt->state == IWL_TI_CT_KILL)
506                                 iwl_perform_ct_kill_task(priv, true);
507                         else if (old_state == IWL_TI_CT_KILL &&
508                                  tt->state != IWL_TI_CT_KILL)
509                                 iwl_perform_ct_kill_task(priv, false);
510                         IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
511                                         tt->state);
512                         IWL_DEBUG_POWER(priv, "Power Index change to %u\n",
513                                         tt->tt_power_mode);
514                 }
515                 mutex_unlock(&priv->mutex);
516         }
517 }
518
519 /*
520  * Advance thermal throttling
521  * 1) Avoid NIC destruction due to high temperatures
522  *      Chip will identify dangerously high temperatures that can
523  *      harm the device and will power down
524  * 2) Avoid the NIC power down due to high temperature
525  *      Throttle early enough to lower the power consumption before
526  *      drastic steps are needed
527  *      Actions include relaxing the power down sleep thresholds and
528  *      decreasing the number of TX streams
529  * 3) Avoid throughput performance impact as much as possible
530  *
531  *=============================================================================
532  *                 Condition Nxt State  Condition Nxt State Condition Nxt State
533  *-----------------------------------------------------------------------------
534  *     IWL_TI_0     T >= 115   CT_KILL  115>T>=105   TI_1      N/A      N/A
535  *     IWL_TI_1     T >= 115   CT_KILL  115>T>=110   TI_2     T<=95     TI_0
536  *     IWL_TI_2     T >= 115   CT_KILL                        T<=100    TI_1
537  *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
538  *=============================================================================
539  */
540 static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp)
541 {
542         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
543         int i;
544         bool changed = false;
545         enum iwl_tt_state old_state;
546         struct iwl_tt_trans *transaction;
547
548         old_state = tt->state;
549         for (i = 0; i < IWL_TI_STATE_MAX - 1; i++) {
550                 /* based on the current TT state,
551                  * find the curresponding transaction table
552                  * each table has (IWL_TI_STATE_MAX - 1) entries
553                  * tt->transaction + ((old_state * (IWL_TI_STATE_MAX - 1))
554                  * will advance to the correct table.
555                  * then based on the current temperature
556                  * find the next state need to transaction to
557                  * go through all the possible (IWL_TI_STATE_MAX - 1) entries
558                  * in the current table to see if transaction is needed
559                  */
560                 transaction = tt->transaction +
561                         ((old_state * (IWL_TI_STATE_MAX - 1)) + i);
562                 if (temp >= transaction->tt_low &&
563                     temp <= transaction->tt_high) {
564 #ifdef CONFIG_IWLWIFI_DEBUG
565                         if ((tt->tt_previous_temp) &&
566                             (temp > tt->tt_previous_temp) &&
567                             ((temp - tt->tt_previous_temp) >
568                             IWL_TT_INCREASE_MARGIN)) {
569                                 IWL_DEBUG_POWER(priv,
570                                         "Temperature increase %d "
571                                         "degree Celsius\n",
572                                         (temp - tt->tt_previous_temp));
573                         }
574                         tt->tt_previous_temp = temp;
575 #endif
576                         if (old_state !=
577                             transaction->next_state) {
578                                 changed = true;
579                                 tt->state =
580                                         transaction->next_state;
581                         }
582                         break;
583                 }
584         }
585         if (changed) {
586                 struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
587
588                 if (tt->state >= IWL_TI_1) {
589                         /* force PI = IWL_POWER_INDEX_5 in the case of TI > 0 */
590                         tt->tt_power_mode = IWL_POWER_INDEX_5;
591                         if (!iwl_ht_enabled(priv))
592                                 /* disable HT */
593                                 rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
594                                         RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
595                                         RXON_FLG_HT40_PROT_MSK |
596                                         RXON_FLG_HT_PROT_MSK);
597                         else {
598                                 /* check HT capability and set
599                                  * according to the system HT capability
600                                  * in case get disabled before */
601                                 iwl_set_rxon_ht(priv, &priv->current_ht_config);
602                         }
603
604                 } else {
605                         /*
606                          * restore system power setting -- it will be
607                          * recalculated automatically.
608                          */
609
610                         /* check HT capability and set
611                          * according to the system HT capability
612                          * in case get disabled before */
613                         iwl_set_rxon_ht(priv, &priv->current_ht_config);
614                 }
615                 mutex_lock(&priv->mutex);
616                 if (iwl_power_update_mode(priv, true)) {
617                         /* TT state not updated
618                          * try again during next temperature read
619                          */
620                         IWL_ERR(priv, "Cannot update power mode, "
621                                         "TT state not updated\n");
622                         tt->state = old_state;
623                 } else {
624                         IWL_DEBUG_POWER(priv,
625                                         "Thermal Throttling to new state: %u\n",
626                                         tt->state);
627                         if (old_state != IWL_TI_CT_KILL &&
628                             tt->state == IWL_TI_CT_KILL) {
629                                 IWL_DEBUG_POWER(priv, "Enter IWL_TI_CT_KILL\n");
630                                 iwl_perform_ct_kill_task(priv, true);
631
632                         } else if (old_state == IWL_TI_CT_KILL &&
633                                   tt->state != IWL_TI_CT_KILL) {
634                                 IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
635                                 iwl_perform_ct_kill_task(priv, false);
636                         }
637                 }
638                 mutex_unlock(&priv->mutex);
639         }
640 }
641
642 /* Card State Notification indicated reach critical temperature
643  * if PSP not enable, no Thermal Throttling function will be performed
644  * just set the GP1 bit to acknowledge the event
645  * otherwise, go into IWL_TI_CT_KILL state
646  * since Card State Notification will not provide any temperature reading
647  * for Legacy mode
648  * so just pass the CT_KILL temperature to iwl_legacy_tt_handler()
649  * for advance mode
650  * pass CT_KILL_THRESHOLD+1 to make sure move into IWL_TI_CT_KILL state
651  */
652 static void iwl_bg_ct_enter(struct work_struct *work)
653 {
654         struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_enter);
655         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
656
657         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
658                 return;
659
660         if (!iwl_is_ready(priv))
661                 return;
662
663         if (tt->state != IWL_TI_CT_KILL) {
664                 IWL_ERR(priv, "Device reached critical temperature "
665                               "- ucode going to sleep!\n");
666                 if (!priv->thermal_throttle.advanced_tt)
667                         iwl_legacy_tt_handler(priv,
668                                               IWL_MINIMAL_POWER_THRESHOLD);
669                 else
670                         iwl_advance_tt_handler(priv,
671                                                CT_KILL_THRESHOLD + 1);
672         }
673 }
674
675 /* Card State Notification indicated out of critical temperature
676  * since Card State Notification will not provide any temperature reading
677  * so pass the IWL_REDUCED_PERFORMANCE_THRESHOLD_2 temperature
678  * to iwl_legacy_tt_handler() to get out of IWL_CT_KILL state
679  */
680 static void iwl_bg_ct_exit(struct work_struct *work)
681 {
682         struct iwl_priv *priv = container_of(work, struct iwl_priv, ct_exit);
683         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
684
685         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
686                 return;
687
688         if (!iwl_is_ready(priv))
689                 return;
690
691         /* stop ct_kill_exit_tm timer */
692         del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
693
694         if (tt->state == IWL_TI_CT_KILL) {
695                 IWL_ERR(priv,
696                         "Device temperature below critical"
697                         "- ucode awake!\n");
698                 if (!priv->thermal_throttle.advanced_tt)
699                         iwl_legacy_tt_handler(priv,
700                                         IWL_REDUCED_PERFORMANCE_THRESHOLD_2);
701                 else
702                         iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD);
703         }
704 }
705
706 void iwl_tt_enter_ct_kill(struct iwl_priv *priv)
707 {
708         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
709                 return;
710
711         IWL_DEBUG_POWER(priv, "Queueing critical temperature enter.\n");
712         queue_work(priv->workqueue, &priv->ct_enter);
713 }
714 EXPORT_SYMBOL(iwl_tt_enter_ct_kill);
715
716 void iwl_tt_exit_ct_kill(struct iwl_priv *priv)
717 {
718         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
719                 return;
720
721         IWL_DEBUG_POWER(priv, "Queueing critical temperature exit.\n");
722         queue_work(priv->workqueue, &priv->ct_exit);
723 }
724 EXPORT_SYMBOL(iwl_tt_exit_ct_kill);
725
726 static void iwl_bg_tt_work(struct work_struct *work)
727 {
728         struct iwl_priv *priv = container_of(work, struct iwl_priv, tt_work);
729         s32 temp = priv->temperature; /* degrees CELSIUS except 4965 */
730
731         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
732                 return;
733
734         if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
735                 temp = KELVIN_TO_CELSIUS(priv->temperature);
736
737         if (!priv->thermal_throttle.advanced_tt)
738                 iwl_legacy_tt_handler(priv, temp);
739         else
740                 iwl_advance_tt_handler(priv, temp);
741 }
742
743 void iwl_tt_handler(struct iwl_priv *priv)
744 {
745         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
746                 return;
747
748         IWL_DEBUG_POWER(priv, "Queueing thermal throttling work.\n");
749         queue_work(priv->workqueue, &priv->tt_work);
750 }
751 EXPORT_SYMBOL(iwl_tt_handler);
752
753 /* Thermal throttling initialization
754  * For advance thermal throttling:
755  *     Initialize Thermal Index and temperature threshold table
756  *     Initialize thermal throttling restriction table
757  */
758 void iwl_tt_initialize(struct iwl_priv *priv)
759 {
760         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
761         int size = sizeof(struct iwl_tt_trans) * (IWL_TI_STATE_MAX - 1);
762         struct iwl_tt_trans *transaction;
763
764         IWL_DEBUG_POWER(priv, "Initialize Thermal Throttling \n");
765
766         memset(tt, 0, sizeof(struct iwl_tt_mgmt));
767
768         tt->state = IWL_TI_0;
769         init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
770         priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
771         priv->thermal_throttle.ct_kill_exit_tm.function = iwl_tt_check_exit_ct_kill;
772
773         /* setup deferred ct kill work */
774         INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
775         INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
776         INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
777
778         switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
779         case CSR_HW_REV_TYPE_6x00:
780         case CSR_HW_REV_TYPE_6x50:
781                 IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
782                 tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
783                                          IWL_TI_STATE_MAX, GFP_KERNEL);
784                 tt->transaction = kzalloc(sizeof(struct iwl_tt_trans) *
785                         IWL_TI_STATE_MAX * (IWL_TI_STATE_MAX - 1),
786                         GFP_KERNEL);
787                 if (!tt->restriction || !tt->transaction) {
788                         IWL_ERR(priv, "Fallback to Legacy Throttling\n");
789                         priv->thermal_throttle.advanced_tt = false;
790                         kfree(tt->restriction);
791                         tt->restriction = NULL;
792                         kfree(tt->transaction);
793                         tt->transaction = NULL;
794                 } else {
795                         transaction = tt->transaction +
796                                 (IWL_TI_0 * (IWL_TI_STATE_MAX - 1));
797                         memcpy(transaction, &tt_range_0[0], size);
798                         transaction = tt->transaction +
799                                 (IWL_TI_1 * (IWL_TI_STATE_MAX - 1));
800                         memcpy(transaction, &tt_range_1[0], size);
801                         transaction = tt->transaction +
802                                 (IWL_TI_2 * (IWL_TI_STATE_MAX - 1));
803                         memcpy(transaction, &tt_range_2[0], size);
804                         transaction = tt->transaction +
805                                 (IWL_TI_CT_KILL * (IWL_TI_STATE_MAX - 1));
806                         memcpy(transaction, &tt_range_3[0], size);
807                         size = sizeof(struct iwl_tt_restriction) *
808                                 IWL_TI_STATE_MAX;
809                         memcpy(tt->restriction,
810                                 &restriction_range[0], size);
811                         priv->thermal_throttle.advanced_tt = true;
812                 }
813                 break;
814         default:
815                 IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
816                 priv->thermal_throttle.advanced_tt = false;
817                 break;
818         }
819 }
820 EXPORT_SYMBOL(iwl_tt_initialize);
821
822 /* cleanup thermal throttling management related memory and timer */
823 void iwl_tt_exit(struct iwl_priv *priv)
824 {
825         struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
826
827         /* stop ct_kill_exit_tm timer if activated */
828         del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
829         cancel_work_sync(&priv->tt_work);
830         cancel_work_sync(&priv->ct_enter);
831         cancel_work_sync(&priv->ct_exit);
832
833         if (priv->thermal_throttle.advanced_tt) {
834                 /* free advance thermal throttling memory */
835                 kfree(tt->restriction);
836                 tt->restriction = NULL;
837                 kfree(tt->transaction);
838                 tt->transaction = NULL;
839         }
840 }
841 EXPORT_SYMBOL(iwl_tt_exit);
842
843 /* initialize to default */
844 void iwl_power_initialize(struct iwl_priv *priv)
845 {
846         u16 lctl = iwl_pcie_link_ctl(priv);
847
848         priv->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
849
850         priv->power_data.debug_sleep_level_override = -1;
851
852         memset(&priv->power_data.sleep_cmd, 0,
853                 sizeof(priv->power_data.sleep_cmd));
854 }
855 EXPORT_SYMBOL(iwl_power_initialize);