]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/net/wireless/iwlwifi/iwl-trans.h
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec...
[karo-tx-linux.git] / drivers / net / wireless / iwlwifi / iwl-trans.h
1 /******************************************************************************
2  *
3  * This file is provided under a dual BSD/GPLv2 license.  When using or
4  * redistributing this file, you may do so under either license.
5  *
6  * GPL LICENSE SUMMARY
7  *
8  * Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved.
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of version 2 of the GNU General Public License as
12  * published by the Free Software Foundation.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
22  * USA
23  *
24  * The full GNU General Public License is included in this distribution
25  * in the file called COPYING.
26  *
27  * Contact Information:
28  *  Intel Linux Wireless <ilw@linux.intel.com>
29  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
30  *
31  * BSD LICENSE
32  *
33  * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
34  * All rights reserved.
35  *
36  * Redistribution and use in source and binary forms, with or without
37  * modification, are permitted provided that the following conditions
38  * are met:
39  *
40  *  * Redistributions of source code must retain the above copyright
41  *    notice, this list of conditions and the following disclaimer.
42  *  * Redistributions in binary form must reproduce the above copyright
43  *    notice, this list of conditions and the following disclaimer in
44  *    the documentation and/or other materials provided with the
45  *    distribution.
46  *  * Neither the name Intel Corporation nor the names of its
47  *    contributors may be used to endorse or promote products derived
48  *    from this software without specific prior written permission.
49  *
50  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
51  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
52  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
53  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
54  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
55  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
56  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
57  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
58  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
59  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
60  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
61  *
62  *****************************************************************************/
63 #ifndef __iwl_trans_h__
64 #define __iwl_trans_h__
65
66 #include <linux/ieee80211.h>
67 #include <linux/mm.h> /* for page_address */
68 #include <linux/lockdep.h>
69
70 #include "iwl-debug.h"
71 #include "iwl-config.h"
72 #include "iwl-fw.h"
73
74 /**
75  * DOC: Transport layer - what is it ?
76  *
77  * The tranport layer is the layer that deals with the HW directly. It provides
78  * an abstraction of the underlying HW to the upper layer. The transport layer
79  * doesn't provide any policy, algorithm or anything of this kind, but only
80  * mechanisms to make the HW do something.It is not completely stateless but
81  * close to it.
82  * We will have an implementation for each different supported bus.
83  */
84
85 /**
86  * DOC: Life cycle of the transport layer
87  *
88  * The transport layer has a very precise life cycle.
89  *
90  *      1) A helper function is called during the module initialization and
91  *         registers the bus driver's ops with the transport's alloc function.
92  *      2) Bus's probe calls to the transport layer's allocation functions.
93  *         Of course this function is bus specific.
94  *      3) This allocation functions will spawn the upper layer which will
95  *         register mac80211.
96  *
97  *      4) At some point (i.e. mac80211's start call), the op_mode will call
98  *         the following sequence:
99  *         start_hw
100  *         start_fw
101  *
102  *      5) Then when finished (or reset):
103  *         stop_fw (a.k.a. stop device for the moment)
104  *         stop_hw
105  *
106  *      6) Eventually, the free function will be called.
107  */
108
109 /**
110  * DOC: Host command section
111  *
112  * A host command is a commaned issued by the upper layer to the fw. There are
113  * several versions of fw that have several APIs. The transport layer is
114  * completely agnostic to these differences.
115  * The transport does provide helper functionnality (i.e. SYNC / ASYNC mode),
116  */
117 #define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
118 #define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
119 #define SEQ_TO_INDEX(s) ((s) & 0xff)
120 #define INDEX_TO_SEQ(i) ((i) & 0xff)
121 #define SEQ_RX_FRAME    cpu_to_le16(0x8000)
122
123 /**
124  * struct iwl_cmd_header
125  *
126  * This header format appears in the beginning of each command sent from the
127  * driver, and each response/notification received from uCode.
128  */
129 struct iwl_cmd_header {
130         u8 cmd;         /* Command ID:  REPLY_RXON, etc. */
131         u8 flags;       /* 0:5 reserved, 6 abort, 7 internal */
132         /*
133          * The driver sets up the sequence number to values of its choosing.
134          * uCode does not use this value, but passes it back to the driver
135          * when sending the response to each driver-originated command, so
136          * the driver can match the response to the command.  Since the values
137          * don't get used by uCode, the driver may set up an arbitrary format.
138          *
139          * There is one exception:  uCode sets bit 15 when it originates
140          * the response/notification, i.e. when the response/notification
141          * is not a direct response to a command sent by the driver.  For
142          * example, uCode issues REPLY_RX when it sends a received frame
143          * to the driver; it is not a direct response to any driver command.
144          *
145          * The Linux driver uses the following format:
146          *
147          *  0:7         tfd index - position within TX queue
148          *  8:12        TX queue id
149          *  13:14       reserved
150          *  15          unsolicited RX or uCode-originated notification
151          */
152         __le16 sequence;
153 } __packed;
154
155 /* iwl_cmd_header flags value */
156 #define IWL_CMD_FAILED_MSK 0x40
157
158
159 #define FH_RSCSR_FRAME_SIZE_MSK         0x00003FFF      /* bits 0-13 */
160 #define FH_RSCSR_FRAME_INVALID          0x55550000
161 #define FH_RSCSR_FRAME_ALIGN            0x40
162
163 struct iwl_rx_packet {
164         /*
165          * The first 4 bytes of the RX frame header contain both the RX frame
166          * size and some flags.
167          * Bit fields:
168          * 31:    flag flush RB request
169          * 30:    flag ignore TC (terminal counter) request
170          * 29:    flag fast IRQ request
171          * 28-14: Reserved
172          * 13-00: RX frame size
173          */
174         __le32 len_n_flags;
175         struct iwl_cmd_header hdr;
176         u8 data[];
177 } __packed;
178
179 /**
180  * enum CMD_MODE - how to send the host commands ?
181  *
182  * @CMD_SYNC: The caller will be stalled until the fw responds to the command
183  * @CMD_ASYNC: Return right away and don't want for the response
184  * @CMD_WANT_SKB: valid only with CMD_SYNC. The caller needs the buffer of the
185  *      response. The caller needs to call iwl_free_resp when done.
186  * @CMD_ON_DEMAND: This command is sent by the test mode pipe.
187  */
188 enum CMD_MODE {
189         CMD_SYNC                = 0,
190         CMD_ASYNC               = BIT(0),
191         CMD_WANT_SKB            = BIT(1),
192         CMD_SEND_IN_RFKILL      = BIT(2),
193         CMD_ON_DEMAND           = BIT(3),
194 };
195
196 #define DEF_CMD_PAYLOAD_SIZE 320
197
198 /**
199  * struct iwl_device_cmd
200  *
201  * For allocation of the command and tx queues, this establishes the overall
202  * size of the largest command we send to uCode, except for commands that
203  * aren't fully copied and use other TFD space.
204  */
205 struct iwl_device_cmd {
206         struct iwl_cmd_header hdr;      /* uCode API */
207         u8 payload[DEF_CMD_PAYLOAD_SIZE];
208 } __packed;
209
210 #define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
211
212 /*
213  * number of transfer buffers (fragments) per transmit frame descriptor;
214  * this is just the driver's idea, the hardware supports 20
215  */
216 #define IWL_MAX_CMD_TBS_PER_TFD 2
217
218 /**
219  * struct iwl_hcmd_dataflag - flag for each one of the chunks of the command
220  *
221  * @IWL_HCMD_DFL_NOCOPY: By default, the command is copied to the host command's
222  *      ring. The transport layer doesn't map the command's buffer to DMA, but
223  *      rather copies it to an previously allocated DMA buffer. This flag tells
224  *      the transport layer not to copy the command, but to map the existing
225  *      buffer (that is passed in) instead. This saves the memcpy and allows
226  *      commands that are bigger than the fixed buffer to be submitted.
227  *      Note that a TFD entry after a NOCOPY one cannot be a normal copied one.
228  * @IWL_HCMD_DFL_DUP: Only valid without NOCOPY, duplicate the memory for this
229  *      chunk internally and free it again after the command completes. This
230  *      can (currently) be used only once per command.
231  *      Note that a TFD entry after a DUP one cannot be a normal copied one.
232  */
233 enum iwl_hcmd_dataflag {
234         IWL_HCMD_DFL_NOCOPY     = BIT(0),
235         IWL_HCMD_DFL_DUP        = BIT(1),
236 };
237
238 /**
239  * struct iwl_host_cmd - Host command to the uCode
240  *
241  * @data: array of chunks that composes the data of the host command
242  * @resp_pkt: response packet, if %CMD_WANT_SKB was set
243  * @_rx_page_order: (internally used to free response packet)
244  * @_rx_page_addr: (internally used to free response packet)
245  * @handler_status: return value of the handler of the command
246  *      (put in setup_rx_handlers) - valid for SYNC mode only
247  * @flags: can be CMD_*
248  * @len: array of the lenths of the chunks in data
249  * @dataflags: IWL_HCMD_DFL_*
250  * @id: id of the host command
251  */
252 struct iwl_host_cmd {
253         const void *data[IWL_MAX_CMD_TBS_PER_TFD];
254         struct iwl_rx_packet *resp_pkt;
255         unsigned long _rx_page_addr;
256         u32 _rx_page_order;
257         int handler_status;
258
259         u32 flags;
260         u16 len[IWL_MAX_CMD_TBS_PER_TFD];
261         u8 dataflags[IWL_MAX_CMD_TBS_PER_TFD];
262         u8 id;
263 };
264
265 static inline void iwl_free_resp(struct iwl_host_cmd *cmd)
266 {
267         free_pages(cmd->_rx_page_addr, cmd->_rx_page_order);
268 }
269
270 struct iwl_rx_cmd_buffer {
271         struct page *_page;
272         int _offset;
273         bool _page_stolen;
274         u32 _rx_page_order;
275         unsigned int truesize;
276 };
277
278 static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
279 {
280         return (void *)((unsigned long)page_address(r->_page) + r->_offset);
281 }
282
283 static inline int rxb_offset(struct iwl_rx_cmd_buffer *r)
284 {
285         return r->_offset;
286 }
287
288 static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r)
289 {
290         r->_page_stolen = true;
291         get_page(r->_page);
292         return r->_page;
293 }
294
295 static inline void iwl_free_rxb(struct iwl_rx_cmd_buffer *r)
296 {
297         __free_pages(r->_page, r->_rx_page_order);
298 }
299
300 #define MAX_NO_RECLAIM_CMDS     6
301
302 #define IWL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))
303
304 /*
305  * Maximum number of HW queues the transport layer
306  * currently supports
307  */
308 #define IWL_MAX_HW_QUEUES               32
309 #define IWL_MAX_TID_COUNT       8
310 #define IWL_FRAME_LIMIT 64
311
312 /**
313  * enum iwl_wowlan_status - WoWLAN image/device status
314  * @IWL_D3_STATUS_ALIVE: firmware is still running after resume
315  * @IWL_D3_STATUS_RESET: device was reset while suspended
316  */
317 enum iwl_d3_status {
318         IWL_D3_STATUS_ALIVE,
319         IWL_D3_STATUS_RESET,
320 };
321
322 /**
323  * struct iwl_trans_config - transport configuration
324  *
325  * @op_mode: pointer to the upper layer.
326  * @cmd_queue: the index of the command queue.
327  *      Must be set before start_fw.
328  * @cmd_fifo: the fifo for host commands
329  * @no_reclaim_cmds: Some devices erroneously don't set the
330  *      SEQ_RX_FRAME bit on some notifications, this is the
331  *      list of such notifications to filter. Max length is
332  *      %MAX_NO_RECLAIM_CMDS.
333  * @n_no_reclaim_cmds: # of commands in list
334  * @rx_buf_size_8k: 8 kB RX buffer size needed for A-MSDUs,
335  *      if unset 4k will be the RX buffer size
336  * @bc_table_dword: set to true if the BC table expects the byte count to be
337  *      in DWORD (as opposed to bytes)
338  * @queue_watchdog_timeout: time (in ms) after which queues
339  *      are considered stuck and will trigger device restart
340  * @command_names: array of command names, must be 256 entries
341  *      (one for each command); for debugging only
342  */
343 struct iwl_trans_config {
344         struct iwl_op_mode *op_mode;
345
346         u8 cmd_queue;
347         u8 cmd_fifo;
348         const u8 *no_reclaim_cmds;
349         int n_no_reclaim_cmds;
350
351         bool rx_buf_size_8k;
352         bool bc_table_dword;
353         unsigned int queue_watchdog_timeout;
354         const char **command_names;
355 };
356
357 struct iwl_trans;
358
359 /**
360  * struct iwl_trans_ops - transport specific operations
361  *
362  * All the handlers MUST be implemented
363  *
364  * @start_hw: starts the HW- from that point on, the HW can send interrupts
365  *      May sleep
366  * @stop_hw: stops the HW- from that point on, the HW will be in low power but
367  *      will still issue interrupt if the HW RF kill is triggered unless
368  *      op_mode_leaving is true.
369  *      May sleep
370  * @start_fw: allocates and inits all the resources for the transport
371  *      layer. Also kick a fw image.
372  *      May sleep
373  * @fw_alive: called when the fw sends alive notification. If the fw provides
374  *      the SCD base address in SRAM, then provide it here, or 0 otherwise.
375  *      May sleep
376  * @stop_device:stops the whole device (embedded CPU put to reset)
377  *      May sleep
378  * @d3_suspend: put the device into the correct mode for WoWLAN during
379  *      suspend. This is optional, if not implemented WoWLAN will not be
380  *      supported. This callback may sleep.
381  * @d3_resume: resume the device after WoWLAN, enabling the opmode to
382  *      talk to the WoWLAN image to get its status. This is optional, if not
383  *      implemented WoWLAN will not be supported. This callback may sleep.
384  * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted.
385  *      If RFkill is asserted in the middle of a SYNC host command, it must
386  *      return -ERFKILL straight away.
387  *      May sleep only if CMD_SYNC is set
388  * @tx: send an skb
389  *      Must be atomic
390  * @reclaim: free packet until ssn. Returns a list of freed packets.
391  *      Must be atomic
392  * @txq_enable: setup a queue. To setup an AC queue, use the
393  *      iwl_trans_ac_txq_enable wrapper. fw_alive must have been called before
394  *      this one. The op_mode must not configure the HCMD queue. May sleep.
395  * @txq_disable: de-configure a Tx queue to send AMPDUs
396  *      Must be atomic
397  * @wait_tx_queue_empty: wait until all tx queues are empty
398  *      May sleep
399  * @dbgfs_register: add the dbgfs files under this directory. Files will be
400  *      automatically deleted.
401  * @suspend: stop the device unless WoWLAN is configured
402  * @resume: resume activity of the device
403  * @write8: write a u8 to a register at offset ofs from the BAR
404  * @write32: write a u32 to a register at offset ofs from the BAR
405  * @read32: read a u32 register at offset ofs from the BAR
406  * @read_prph: read a DWORD from a periphery register
407  * @write_prph: write a DWORD to a periphery register
408  * @read_mem: read device's SRAM in DWORD
409  * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory
410  *      will be zeroed.
411  * @configure: configure parameters required by the transport layer from
412  *      the op_mode. May be called several times before start_fw, can't be
413  *      called after that.
414  * @set_pmi: set the power pmi state
415  * @grab_nic_access: wake the NIC to be able to access non-HBUS regs.
416  *      Sleeping is not allowed between grab_nic_access and
417  *      release_nic_access.
418  * @release_nic_access: let the NIC go to sleep. The "flags" parameter
419  *      must be the same one that was sent before to the grab_nic_access.
420  * @set_bits_mask - set SRAM register according to value and mask.
421  */
422 struct iwl_trans_ops {
423
424         int (*start_hw)(struct iwl_trans *iwl_trans);
425         void (*stop_hw)(struct iwl_trans *iwl_trans, bool op_mode_leaving);
426         int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw,
427                         bool run_in_rfkill);
428         void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr);
429         void (*stop_device)(struct iwl_trans *trans);
430
431         void (*d3_suspend)(struct iwl_trans *trans, bool test);
432         int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status,
433                          bool test);
434
435         int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd);
436
437         int (*tx)(struct iwl_trans *trans, struct sk_buff *skb,
438                   struct iwl_device_cmd *dev_cmd, int queue);
439         void (*reclaim)(struct iwl_trans *trans, int queue, int ssn,
440                         struct sk_buff_head *skbs);
441
442         void (*txq_enable)(struct iwl_trans *trans, int queue, int fifo,
443                            int sta_id, int tid, int frame_limit, u16 ssn);
444         void (*txq_disable)(struct iwl_trans *trans, int queue);
445
446         int (*dbgfs_register)(struct iwl_trans *trans, struct dentry* dir);
447         int (*wait_tx_queue_empty)(struct iwl_trans *trans);
448 #ifdef CONFIG_PM_SLEEP
449         int (*suspend)(struct iwl_trans *trans);
450         int (*resume)(struct iwl_trans *trans);
451 #endif
452         void (*write8)(struct iwl_trans *trans, u32 ofs, u8 val);
453         void (*write32)(struct iwl_trans *trans, u32 ofs, u32 val);
454         u32 (*read32)(struct iwl_trans *trans, u32 ofs);
455         u32 (*read_prph)(struct iwl_trans *trans, u32 ofs);
456         void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val);
457         int (*read_mem)(struct iwl_trans *trans, u32 addr,
458                         void *buf, int dwords);
459         int (*write_mem)(struct iwl_trans *trans, u32 addr,
460                          const void *buf, int dwords);
461         void (*configure)(struct iwl_trans *trans,
462                           const struct iwl_trans_config *trans_cfg);
463         void (*set_pmi)(struct iwl_trans *trans, bool state);
464         bool (*grab_nic_access)(struct iwl_trans *trans, bool silent,
465                                 unsigned long *flags);
466         void (*release_nic_access)(struct iwl_trans *trans,
467                                    unsigned long *flags);
468         void (*set_bits_mask)(struct iwl_trans *trans, u32 reg, u32 mask,
469                               u32 value);
470 };
471
472 /**
473  * enum iwl_trans_state - state of the transport layer
474  *
475  * @IWL_TRANS_NO_FW: no fw has sent an alive response
476  * @IWL_TRANS_FW_ALIVE: a fw has sent an alive response
477  */
478 enum iwl_trans_state {
479         IWL_TRANS_NO_FW = 0,
480         IWL_TRANS_FW_ALIVE      = 1,
481 };
482
483 /**
484  * struct iwl_trans - transport common data
485  *
486  * @ops - pointer to iwl_trans_ops
487  * @op_mode - pointer to the op_mode
488  * @cfg - pointer to the configuration
489  * @dev - pointer to struct device * that represents the device
490  * @hw_id: a u32 with the ID of the device / subdevice.
491  *      Set during transport allocation.
492  * @hw_id_str: a string with info about HW ID. Set during transport allocation.
493  * @pm_support: set to true in start_hw if link pm is supported
494  * @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
495  *      The user should use iwl_trans_{alloc,free}_tx_cmd.
496  * @dev_cmd_headroom: room needed for the transport's private use before the
497  *      device_cmd for Tx - for internal use only
498  *      The user should use iwl_trans_{alloc,free}_tx_cmd.
499  * @rx_mpdu_cmd: MPDU RX command ID, must be assigned by opmode before
500  *      starting the firmware, used for tracing
501  * @rx_mpdu_cmd_hdr_size: used for tracing, amount of data before the
502  *      start of the 802.11 header in the @rx_mpdu_cmd
503  */
504 struct iwl_trans {
505         const struct iwl_trans_ops *ops;
506         struct iwl_op_mode *op_mode;
507         const struct iwl_cfg *cfg;
508         enum iwl_trans_state state;
509
510         struct device *dev;
511         u32 hw_rev;
512         u32 hw_id;
513         char hw_id_str[52];
514
515         u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
516
517         bool pm_support;
518
519         /* The following fields are internal only */
520         struct kmem_cache *dev_cmd_pool;
521         size_t dev_cmd_headroom;
522         char dev_cmd_pool_name[50];
523
524         struct dentry *dbgfs_dir;
525
526 #ifdef CONFIG_LOCKDEP
527         struct lockdep_map sync_cmd_lockdep_map;
528 #endif
529
530         /* pointer to trans specific struct */
531         /*Ensure that this pointer will always be aligned to sizeof pointer */
532         char trans_specific[0] __aligned(sizeof(void *));
533 };
534
535 static inline void iwl_trans_configure(struct iwl_trans *trans,
536                                        const struct iwl_trans_config *trans_cfg)
537 {
538         trans->op_mode = trans_cfg->op_mode;
539
540         trans->ops->configure(trans, trans_cfg);
541 }
542
543 static inline int iwl_trans_start_hw(struct iwl_trans *trans)
544 {
545         might_sleep();
546
547         return trans->ops->start_hw(trans);
548 }
549
550 static inline void iwl_trans_stop_hw(struct iwl_trans *trans,
551                                      bool op_mode_leaving)
552 {
553         might_sleep();
554
555         trans->ops->stop_hw(trans, op_mode_leaving);
556
557         if (op_mode_leaving)
558                 trans->op_mode = NULL;
559
560         trans->state = IWL_TRANS_NO_FW;
561 }
562
563 static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr)
564 {
565         might_sleep();
566
567         trans->state = IWL_TRANS_FW_ALIVE;
568
569         trans->ops->fw_alive(trans, scd_addr);
570 }
571
572 static inline int iwl_trans_start_fw(struct iwl_trans *trans,
573                                      const struct fw_img *fw,
574                                      bool run_in_rfkill)
575 {
576         might_sleep();
577
578         WARN_ON_ONCE(!trans->rx_mpdu_cmd);
579
580         return trans->ops->start_fw(trans, fw, run_in_rfkill);
581 }
582
583 static inline void iwl_trans_stop_device(struct iwl_trans *trans)
584 {
585         might_sleep();
586
587         trans->ops->stop_device(trans);
588
589         trans->state = IWL_TRANS_NO_FW;
590 }
591
592 static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test)
593 {
594         might_sleep();
595         trans->ops->d3_suspend(trans, test);
596 }
597
598 static inline int iwl_trans_d3_resume(struct iwl_trans *trans,
599                                       enum iwl_d3_status *status,
600                                       bool test)
601 {
602         might_sleep();
603         return trans->ops->d3_resume(trans, status, test);
604 }
605
606 static inline int iwl_trans_send_cmd(struct iwl_trans *trans,
607                                      struct iwl_host_cmd *cmd)
608 {
609         int ret;
610
611         WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
612                   "%s bad state = %d", __func__, trans->state);
613
614         if (!(cmd->flags & CMD_ASYNC))
615                 lock_map_acquire_read(&trans->sync_cmd_lockdep_map);
616
617         ret = trans->ops->send_cmd(trans, cmd);
618
619         if (!(cmd->flags & CMD_ASYNC))
620                 lock_map_release(&trans->sync_cmd_lockdep_map);
621
622         return ret;
623 }
624
625 static inline struct iwl_device_cmd *
626 iwl_trans_alloc_tx_cmd(struct iwl_trans *trans)
627 {
628         u8 *dev_cmd_ptr = kmem_cache_alloc(trans->dev_cmd_pool, GFP_ATOMIC);
629
630         if (unlikely(dev_cmd_ptr == NULL))
631                 return NULL;
632
633         return (struct iwl_device_cmd *)
634                         (dev_cmd_ptr + trans->dev_cmd_headroom);
635 }
636
637 static inline void iwl_trans_free_tx_cmd(struct iwl_trans *trans,
638                                          struct iwl_device_cmd *dev_cmd)
639 {
640         u8 *dev_cmd_ptr = (u8 *)dev_cmd - trans->dev_cmd_headroom;
641
642         kmem_cache_free(trans->dev_cmd_pool, dev_cmd_ptr);
643 }
644
645 static inline int iwl_trans_tx(struct iwl_trans *trans, struct sk_buff *skb,
646                                struct iwl_device_cmd *dev_cmd, int queue)
647 {
648         WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
649                   "%s bad state = %d", __func__, trans->state);
650
651         return trans->ops->tx(trans, skb, dev_cmd, queue);
652 }
653
654 static inline void iwl_trans_reclaim(struct iwl_trans *trans, int queue,
655                                      int ssn, struct sk_buff_head *skbs)
656 {
657         WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
658                   "%s bad state = %d", __func__, trans->state);
659
660         trans->ops->reclaim(trans, queue, ssn, skbs);
661 }
662
663 static inline void iwl_trans_txq_disable(struct iwl_trans *trans, int queue)
664 {
665         WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
666                   "%s bad state = %d", __func__, trans->state);
667
668         trans->ops->txq_disable(trans, queue);
669 }
670
671 static inline void iwl_trans_txq_enable(struct iwl_trans *trans, int queue,
672                                         int fifo, int sta_id, int tid,
673                                         int frame_limit, u16 ssn)
674 {
675         might_sleep();
676
677         WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
678                   "%s bad state = %d", __func__, trans->state);
679
680         trans->ops->txq_enable(trans, queue, fifo, sta_id, tid,
681                                  frame_limit, ssn);
682 }
683
684 static inline void iwl_trans_ac_txq_enable(struct iwl_trans *trans, int queue,
685                                            int fifo)
686 {
687         iwl_trans_txq_enable(trans, queue, fifo, -1,
688                              IWL_MAX_TID_COUNT, IWL_FRAME_LIMIT, 0);
689 }
690
691 static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans)
692 {
693         WARN_ONCE(trans->state != IWL_TRANS_FW_ALIVE,
694                   "%s bad state = %d", __func__, trans->state);
695
696         return trans->ops->wait_tx_queue_empty(trans);
697 }
698
699 static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans,
700                                            struct dentry *dir)
701 {
702         return trans->ops->dbgfs_register(trans, dir);
703 }
704
705 #ifdef CONFIG_PM_SLEEP
706 static inline int iwl_trans_suspend(struct iwl_trans *trans)
707 {
708         return trans->ops->suspend(trans);
709 }
710
711 static inline int iwl_trans_resume(struct iwl_trans *trans)
712 {
713         return trans->ops->resume(trans);
714 }
715 #endif
716
717 static inline void iwl_trans_write8(struct iwl_trans *trans, u32 ofs, u8 val)
718 {
719         trans->ops->write8(trans, ofs, val);
720 }
721
722 static inline void iwl_trans_write32(struct iwl_trans *trans, u32 ofs, u32 val)
723 {
724         trans->ops->write32(trans, ofs, val);
725 }
726
727 static inline u32 iwl_trans_read32(struct iwl_trans *trans, u32 ofs)
728 {
729         return trans->ops->read32(trans, ofs);
730 }
731
732 static inline u32 iwl_trans_read_prph(struct iwl_trans *trans, u32 ofs)
733 {
734         return trans->ops->read_prph(trans, ofs);
735 }
736
737 static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs,
738                                         u32 val)
739 {
740         return trans->ops->write_prph(trans, ofs, val);
741 }
742
743 static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr,
744                                      void *buf, int dwords)
745 {
746         return trans->ops->read_mem(trans, addr, buf, dwords);
747 }
748
749 #define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize)                   \
750         do {                                                                  \
751                 if (__builtin_constant_p(bufsize))                            \
752                         BUILD_BUG_ON((bufsize) % sizeof(u32));                \
753                 iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\
754         } while (0)
755
756 static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr)
757 {
758         u32 value;
759
760         if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1)))
761                 return 0xa5a5a5a5;
762
763         return value;
764 }
765
766 static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr,
767                                       const void *buf, int dwords)
768 {
769         return trans->ops->write_mem(trans, addr, buf, dwords);
770 }
771
772 static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr,
773                                         u32 val)
774 {
775         return iwl_trans_write_mem(trans, addr, &val, 1);
776 }
777
778 static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state)
779 {
780         trans->ops->set_pmi(trans, state);
781 }
782
783 static inline void
784 iwl_trans_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value)
785 {
786         trans->ops->set_bits_mask(trans, reg, mask, value);
787 }
788
789 #define iwl_trans_grab_nic_access(trans, silent, flags) \
790         __cond_lock(nic_access,                         \
791                     likely((trans)->ops->grab_nic_access(trans, silent, flags)))
792
793 static inline void __releases(nic_access)
794 iwl_trans_release_nic_access(struct iwl_trans *trans, unsigned long *flags)
795 {
796         trans->ops->release_nic_access(trans, flags);
797         __release(nic_access);
798 }
799
800 /*****************************************************
801 * driver (transport) register/unregister functions
802 ******************************************************/
803 int __must_check iwl_pci_register_driver(void);
804 void iwl_pci_unregister_driver(void);
805
806 static inline void trans_lockdep_init(struct iwl_trans *trans)
807 {
808 #ifdef CONFIG_LOCKDEP
809         static struct lock_class_key __key;
810
811         lockdep_init_map(&trans->sync_cmd_lockdep_map, "sync_cmd_lockdep_map",
812                          &__key, 0);
813 #endif
814 }
815
816 #endif /* __iwl_trans_h__ */