2 * This file function prototypes, data structure
3 * and definitions for all the host/station commands
12 #define DEFAULT_AD_HOC_CHANNEL 6
14 #define CMD_OPTION_WAITFORRSP 0x0002
16 /** Host command IDs */
18 /* Return command are almost always the same as the host command, but with
19 * bit 15 set high. There are a few exceptions, though...
21 #define CMD_RET(cmd) (0x8000 | cmd)
23 /* Return command convention exceptions: */
24 #define CMD_RET_802_11_ASSOCIATE 0x8012
27 #define CMD_GET_HW_SPEC 0x0003
28 #define CMD_EEPROM_UPDATE 0x0004
29 #define CMD_802_11_RESET 0x0005
30 #define CMD_802_11_SCAN 0x0006
31 #define CMD_802_11_GET_LOG 0x000b
32 #define CMD_MAC_MULTICAST_ADR 0x0010
33 #define CMD_802_11_AUTHENTICATE 0x0011
34 #define CMD_802_11_EEPROM_ACCESS 0x0059
35 #define CMD_802_11_ASSOCIATE 0x0050
36 #define CMD_802_11_SET_WEP 0x0013
37 #define CMD_802_11_GET_STAT 0x0014
38 #define CMD_802_3_GET_STAT 0x0015
39 #define CMD_802_11_SNMP_MIB 0x0016
40 #define CMD_MAC_REG_MAP 0x0017
41 #define CMD_BBP_REG_MAP 0x0018
42 #define CMD_MAC_REG_ACCESS 0x0019
43 #define CMD_BBP_REG_ACCESS 0x001a
44 #define CMD_RF_REG_ACCESS 0x001b
45 #define CMD_802_11_RADIO_CONTROL 0x001c
46 #define CMD_802_11_RF_CHANNEL 0x001d
47 #define CMD_802_11_RF_TX_POWER 0x001e
48 #define CMD_802_11_RSSI 0x001f
49 #define CMD_802_11_RF_ANTENNA 0x0020
50 #define CMD_802_11_PS_MODE 0x0021
51 #define CMD_802_11_DATA_RATE 0x0022
52 #define CMD_RF_REG_MAP 0x0023
53 #define CMD_802_11_DEAUTHENTICATE 0x0024
54 #define CMD_802_11_REASSOCIATE 0x0025
55 #define CMD_MAC_CONTROL 0x0028
56 #define CMD_802_11_AD_HOC_START 0x002b
57 #define CMD_802_11_AD_HOC_JOIN 0x002c
58 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS 0x002e
59 #define CMD_802_11_ENABLE_RSN 0x002f
60 #define CMD_802_11_SET_AFC 0x003c
61 #define CMD_802_11_GET_AFC 0x003d
62 #define CMD_802_11_DEEP_SLEEP 0x003e
63 #define CMD_802_11_AD_HOC_STOP 0x0040
64 #define CMD_802_11_HOST_SLEEP_CFG 0x0043
65 #define CMD_802_11_WAKEUP_CONFIRM 0x0044
66 #define CMD_802_11_HOST_SLEEP_ACTIVATE 0x0045
67 #define CMD_802_11_BEACON_STOP 0x0049
68 #define CMD_802_11_MAC_ADDRESS 0x004d
69 #define CMD_802_11_LED_GPIO_CTRL 0x004e
70 #define CMD_802_11_EEPROM_ACCESS 0x0059
71 #define CMD_802_11_BAND_CONFIG 0x0058
72 #define CMD_GSPI_BUS_CONFIG 0x005a
73 #define CMD_802_11D_DOMAIN_INFO 0x005b
74 #define CMD_802_11_KEY_MATERIAL 0x005e
75 #define CMD_802_11_SLEEP_PARAMS 0x0066
76 #define CMD_802_11_INACTIVITY_TIMEOUT 0x0067
77 #define CMD_802_11_SLEEP_PERIOD 0x0068
78 #define CMD_802_11_TPC_CFG 0x0072
79 #define CMD_802_11_PA_CFG 0x0073
80 #define CMD_802_11_FW_WAKE_METHOD 0x0074
81 #define CMD_802_11_SUBSCRIBE_EVENT 0x0075
82 #define CMD_802_11_RATE_ADAPT_RATESET 0x0076
83 #define CMD_802_11_TX_RATE_QUERY 0x007f
84 #define CMD_GET_TSF 0x0080
85 #define CMD_BT_ACCESS 0x0087
86 #define CMD_FWT_ACCESS 0x0095
87 #define CMD_802_11_MONITOR_MODE 0x0098
88 #define CMD_MESH_ACCESS 0x009b
89 #define CMD_MESH_CONFIG_OLD 0x00a3
90 #define CMD_MESH_CONFIG 0x00ac
91 #define CMD_SET_BOOT2_VER 0x00a5
92 #define CMD_FUNC_INIT 0x00a9
93 #define CMD_FUNC_SHUTDOWN 0x00aa
94 #define CMD_802_11_BEACON_CTRL 0x00b0
96 /* For the IEEE Power Save */
97 #define CMD_SUBCMD_ENTER_PS 0x0030
98 #define CMD_SUBCMD_EXIT_PS 0x0031
99 #define CMD_SUBCMD_SLEEP_CONFIRMED 0x0034
100 #define CMD_SUBCMD_FULL_POWERDOWN 0x0035
101 #define CMD_SUBCMD_FULL_POWERUP 0x0036
103 #define CMD_ENABLE_RSN 0x0001
104 #define CMD_DISABLE_RSN 0x0000
106 #define CMD_ACT_GET 0x0000
107 #define CMD_ACT_SET 0x0001
109 /* Define action or option for CMD_802_11_SET_WEP */
110 #define CMD_ACT_ADD 0x0002
111 #define CMD_ACT_REMOVE 0x0004
113 #define CMD_TYPE_WEP_40_BIT 0x01
114 #define CMD_TYPE_WEP_104_BIT 0x02
116 #define CMD_NUM_OF_WEP_KEYS 4
118 #define CMD_WEP_KEY_INDEX_MASK 0x3fff
120 /* Define action or option for CMD_802_11_SCAN */
121 #define CMD_BSS_TYPE_BSS 0x0001
122 #define CMD_BSS_TYPE_IBSS 0x0002
123 #define CMD_BSS_TYPE_ANY 0x0003
125 /* Define action or option for CMD_802_11_SCAN */
126 #define CMD_SCAN_TYPE_ACTIVE 0x0000
127 #define CMD_SCAN_TYPE_PASSIVE 0x0001
129 #define CMD_SCAN_RADIO_TYPE_BG 0
131 #define CMD_SCAN_PROBE_DELAY_TIME 0
133 /* Define action or option for CMD_MAC_CONTROL */
134 #define CMD_ACT_MAC_RX_ON 0x0001
135 #define CMD_ACT_MAC_TX_ON 0x0002
136 #define CMD_ACT_MAC_LOOPBACK_ON 0x0004
137 #define CMD_ACT_MAC_WEP_ENABLE 0x0008
138 #define CMD_ACT_MAC_INT_ENABLE 0x0010
139 #define CMD_ACT_MAC_MULTICAST_ENABLE 0x0020
140 #define CMD_ACT_MAC_BROADCAST_ENABLE 0x0040
141 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
142 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
143 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
145 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
146 #define CMD_SUBSCRIBE_RSSI_LOW 0x0001
147 #define CMD_SUBSCRIBE_SNR_LOW 0x0002
148 #define CMD_SUBSCRIBE_FAILCOUNT 0x0004
149 #define CMD_SUBSCRIBE_BCNMISS 0x0008
150 #define CMD_SUBSCRIBE_RSSI_HIGH 0x0010
151 #define CMD_SUBSCRIBE_SNR_HIGH 0x0020
153 #define RADIO_PREAMBLE_LONG 0x00
154 #define RADIO_PREAMBLE_SHORT 0x02
155 #define RADIO_PREAMBLE_AUTO 0x04
157 /* Define action or option for CMD_802_11_RF_CHANNEL */
158 #define CMD_OPT_802_11_RF_CHANNEL_GET 0x00
159 #define CMD_OPT_802_11_RF_CHANNEL_SET 0x01
161 /* Define action or option for CMD_802_11_DATA_RATE */
162 #define CMD_ACT_SET_TX_AUTO 0x0000
163 #define CMD_ACT_SET_TX_FIX_RATE 0x0001
164 #define CMD_ACT_GET_TX_RATE 0x0002
166 /* Define action or option for CMD_802_11_PS_MODE */
167 #define CMD_TYPE_CAM 0x0000
168 #define CMD_TYPE_MAX_PSP 0x0001
169 #define CMD_TYPE_FAST_PSP 0x0002
171 /* Options for CMD_802_11_FW_WAKE_METHOD */
172 #define CMD_WAKE_METHOD_UNCHANGED 0x0000
173 #define CMD_WAKE_METHOD_COMMAND_INT 0x0001
174 #define CMD_WAKE_METHOD_GPIO 0x0002
176 /* Object IDs for CMD_802_11_SNMP_MIB */
177 #define SNMP_MIB_OID_BSS_TYPE 0x0000
178 #define SNMP_MIB_OID_OP_RATE_SET 0x0001
179 #define SNMP_MIB_OID_BEACON_PERIOD 0x0002 /* Reserved on v9+ */
180 #define SNMP_MIB_OID_DTIM_PERIOD 0x0003 /* Reserved on v9+ */
181 #define SNMP_MIB_OID_ASSOC_TIMEOUT 0x0004 /* Reserved on v9+ */
182 #define SNMP_MIB_OID_RTS_THRESHOLD 0x0005
183 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT 0x0006
184 #define SNMP_MIB_OID_LONG_RETRY_LIMIT 0x0007
185 #define SNMP_MIB_OID_FRAG_THRESHOLD 0x0008
186 #define SNMP_MIB_OID_11D_ENABLE 0x0009
187 #define SNMP_MIB_OID_11H_ENABLE 0x000A
189 /* Define action or option for CMD_BT_ACCESS */
190 enum cmd_bt_access_opts {
191 /* The bt commands start at 5 instead of 1 because the old dft commands
192 * are mapped to 1-4. These old commands are no longer maintained and
193 * should not be called.
195 CMD_ACT_BT_ACCESS_ADD = 5,
196 CMD_ACT_BT_ACCESS_DEL,
197 CMD_ACT_BT_ACCESS_LIST,
198 CMD_ACT_BT_ACCESS_RESET,
199 CMD_ACT_BT_ACCESS_SET_INVERT,
200 CMD_ACT_BT_ACCESS_GET_INVERT
203 /* Define action or option for CMD_FWT_ACCESS */
204 enum cmd_fwt_access_opts {
205 CMD_ACT_FWT_ACCESS_ADD = 1,
206 CMD_ACT_FWT_ACCESS_DEL,
207 CMD_ACT_FWT_ACCESS_LOOKUP,
208 CMD_ACT_FWT_ACCESS_LIST,
209 CMD_ACT_FWT_ACCESS_LIST_ROUTE,
210 CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
211 CMD_ACT_FWT_ACCESS_RESET,
212 CMD_ACT_FWT_ACCESS_CLEANUP,
213 CMD_ACT_FWT_ACCESS_TIME,
216 /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
217 enum cmd_wol_cfg_opts {
218 CMD_ACT_ACTION_NONE = 0,
219 CMD_ACT_SET_WOL_RULE,
220 CMD_ACT_GET_WOL_RULE,
221 CMD_ACT_RESET_WOL_RULE,
224 /* Define action or option for CMD_MESH_ACCESS */
225 enum cmd_mesh_access_opts {
226 CMD_ACT_MESH_GET_TTL = 1,
227 CMD_ACT_MESH_SET_TTL,
228 CMD_ACT_MESH_GET_STATS,
229 CMD_ACT_MESH_GET_ANYCAST,
230 CMD_ACT_MESH_SET_ANYCAST,
231 CMD_ACT_MESH_SET_LINK_COSTS,
232 CMD_ACT_MESH_GET_LINK_COSTS,
233 CMD_ACT_MESH_SET_BCAST_RATE,
234 CMD_ACT_MESH_GET_BCAST_RATE,
235 CMD_ACT_MESH_SET_RREQ_DELAY,
236 CMD_ACT_MESH_GET_RREQ_DELAY,
237 CMD_ACT_MESH_SET_ROUTE_EXP,
238 CMD_ACT_MESH_GET_ROUTE_EXP,
239 CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
240 CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
241 CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
244 /* Define actions and types for CMD_MESH_CONFIG */
245 enum cmd_mesh_config_actions {
246 CMD_ACT_MESH_CONFIG_STOP = 0,
247 CMD_ACT_MESH_CONFIG_START,
248 CMD_ACT_MESH_CONFIG_SET,
249 CMD_ACT_MESH_CONFIG_GET,
252 enum cmd_mesh_config_types {
253 CMD_TYPE_MESH_SET_BOOTFLAG = 1,
254 CMD_TYPE_MESH_SET_BOOTTIME,
255 CMD_TYPE_MESH_SET_DEF_CHANNEL,
256 CMD_TYPE_MESH_SET_MESH_IE,
257 CMD_TYPE_MESH_GET_DEFAULTS,
258 CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
261 /** Card Event definition */
262 #define MACREG_INT_CODE_TX_PPA_FREE 0
263 #define MACREG_INT_CODE_TX_DMA_DONE 1
264 #define MACREG_INT_CODE_LINK_LOST_W_SCAN 2
265 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN 3
266 #define MACREG_INT_CODE_LINK_SENSED 4
267 #define MACREG_INT_CODE_CMD_FINISHED 5
268 #define MACREG_INT_CODE_MIB_CHANGED 6
269 #define MACREG_INT_CODE_INIT_DONE 7
270 #define MACREG_INT_CODE_DEAUTHENTICATED 8
271 #define MACREG_INT_CODE_DISASSOCIATED 9
272 #define MACREG_INT_CODE_PS_AWAKE 10
273 #define MACREG_INT_CODE_PS_SLEEP 11
274 #define MACREG_INT_CODE_MIC_ERR_MULTICAST 13
275 #define MACREG_INT_CODE_MIC_ERR_UNICAST 14
276 #define MACREG_INT_CODE_WM_AWAKE 15
277 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE 16
278 #define MACREG_INT_CODE_ADHOC_BCN_LOST 17
279 #define MACREG_INT_CODE_HOST_AWAKE 18
280 #define MACREG_INT_CODE_STOP_TX 19
281 #define MACREG_INT_CODE_START_TX 20
282 #define MACREG_INT_CODE_CHANNEL_SWITCH 21
283 #define MACREG_INT_CODE_MEASUREMENT_RDY 22
284 #define MACREG_INT_CODE_WMM_CHANGE 23
285 #define MACREG_INT_CODE_BG_SCAN_REPORT 24
286 #define MACREG_INT_CODE_RSSI_LOW 25
287 #define MACREG_INT_CODE_SNR_LOW 26
288 #define MACREG_INT_CODE_MAX_FAIL 27
289 #define MACREG_INT_CODE_RSSI_HIGH 28
290 #define MACREG_INT_CODE_SNR_HIGH 29
291 #define MACREG_INT_CODE_MESH_AUTO_STARTED 35
292 #define MACREG_INT_CODE_FIRMWARE_READY 48
295 /* 802.11-related definitions */
297 /* TxPD descriptor */
299 /* union to cope up with later FW revisions */
301 /* Current Tx packet status */
304 /* BSS type: client, AP, etc. */
314 __le32 tx_packet_location;
315 /* Tx packet length */
316 __le16 tx_packet_length;
317 /* First 2 byte of destination MAC address */
318 u8 tx_dest_addr_high[2];
319 /* Last 4 byte of destination MAC address */
320 u8 tx_dest_addr_low[4];
323 /* Pkt Trasnit Power control */
325 /* Amount of time the packet has been queued (units = 2ms) */
329 } __attribute__ ((packed));
331 /* RxPD Descriptor */
333 /* union to cope up with later FW revisions */
335 /* Current Rx packet status */
338 /* BSS type: client, AP, etc. */
342 } __attribute__ ((packed)) bss;
343 } __attribute__ ((packed)) u;
363 /* Next Rx RxPD addr */
364 __le32 next_rxpd_ptr;
369 } __attribute__ ((packed));
376 } __attribute__ ((packed));
378 /* Generic structure to hold all key types. */
381 u16 flags; /* KEY_INFO_* from defs.h */
382 u16 type; /* KEY_TYPE_* from defs.h */
386 /* lbs_offset_value */
387 struct lbs_offset_value {
390 } __attribute__ ((packed));
392 #define MRVDRV_MAX_TRIPLET_802_11D 83
394 #define COUNTRY_CODE_LEN 3
396 struct mrvl_ie_domain_param_set {
397 struct mrvl_ie_header header;
399 u8 countrycode[COUNTRY_CODE_LEN];
400 struct ieee80211_country_ie_triplet triplet[1];
401 } __attribute__ ((packed));
403 struct cmd_ds_802_11d_domain_info {
405 struct mrvl_ie_domain_param_set domain;
406 } __attribute__ ((packed));
408 struct lbs_802_11d_domain_reg {
410 u8 country_code[COUNTRY_CODE_LEN];
413 struct ieee80211_country_ie_triplet triplet[MRVDRV_MAX_TRIPLET_802_11D];
414 } __attribute__ ((packed));
417 * Define data structure for CMD_GET_HW_SPEC
418 * This structure defines the response for the GET_HW_SPEC command
420 struct cmd_ds_get_hw_spec {
421 struct cmd_header hdr;
423 /* HW Interface version number */
425 /* HW version number */
427 /* Max number of TxPD FW can handle */
429 /* Max no of Multicast address */
437 /* Number of antenna used */
440 /* FW release number, example 0x01030304 = 2.3.4p1 */
443 /* Base Address of TxPD queue */
445 /* Read Pointer of RxPd queue */
448 /* Write Pointer of RxPd queue */
451 /*FW/HW capability */
453 } __attribute__ ((packed));
455 struct cmd_ds_802_11_subscribe_event {
456 struct cmd_header hdr;
461 /* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
462 * number of TLVs. From the v5.1 manual, those TLVs would add up to
463 * 40 bytes. However, future firmware might add additional TLVs, so I
464 * bump this up a bit.
467 } __attribute__ ((packed));
470 * This scan handle Country Information IE(802.11d compliant)
471 * Define data structure for CMD_802_11_SCAN
473 struct cmd_ds_802_11_scan {
474 struct cmd_header hdr;
477 uint8_t bssid[ETH_ALEN];
478 uint8_t tlvbuffer[0];
479 } __attribute__ ((packed));
481 struct cmd_ds_802_11_scan_rsp {
482 struct cmd_header hdr;
484 __le16 bssdescriptsize;
486 uint8_t bssdesc_and_tlvbuffer[0];
487 } __attribute__ ((packed));
489 struct cmd_ds_802_11_get_log {
490 struct cmd_header hdr;
504 __le32 wepundecryptable;
505 } __attribute__ ((packed));
507 struct cmd_ds_mac_control {
508 struct cmd_header hdr;
511 } __attribute__ ((packed));
513 struct cmd_ds_mac_multicast_adr {
514 struct cmd_header hdr;
517 u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
518 } __attribute__ ((packed));
520 struct cmd_ds_802_11_authenticate {
521 struct cmd_header hdr;
526 } __attribute__ ((packed));
528 struct cmd_ds_802_11_deauthenticate {
529 struct cmd_header hdr;
531 u8 macaddr[ETH_ALEN];
533 } __attribute__ ((packed));
535 struct cmd_ds_802_11_associate {
536 struct cmd_header hdr;
540 __le16 listeninterval;
543 u8 iebuf[512]; /* Enough for required and most optional IEs */
544 } __attribute__ ((packed));
546 struct cmd_ds_802_11_associate_response {
547 struct cmd_header hdr;
553 } __attribute__ ((packed));
555 struct cmd_ds_802_11_set_wep {
556 struct cmd_header hdr;
558 /* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
561 /* key Index selected for Tx */
564 /* 40, 128bit or TXWEP */
566 uint8_t keymaterial[4][16];
567 } __attribute__ ((packed));
569 struct cmd_ds_802_11_snmp_mib {
570 struct cmd_header hdr;
576 } __attribute__ ((packed));
578 struct cmd_ds_mac_reg_access {
582 } __attribute__ ((packed));
584 struct cmd_ds_bbp_reg_access {
589 } __attribute__ ((packed));
591 struct cmd_ds_rf_reg_access {
596 } __attribute__ ((packed));
598 struct cmd_ds_802_11_radio_control {
599 struct cmd_header hdr;
603 } __attribute__ ((packed));
605 struct cmd_ds_802_11_beacon_control {
607 __le16 beacon_enable;
608 __le16 beacon_period;
609 } __attribute__ ((packed));
611 struct cmd_ds_802_11_sleep_params {
612 struct cmd_header hdr;
614 /* ACT_GET/ACT_SET */
617 /* Sleep clock error in ppm */
620 /* Wakeup offset in usec */
623 /* Clock stabilization time in usec */
626 /* control periodic calibration */
629 /* control the use of external sleep clock */
630 uint8_t externalsleepclk;
632 /* reserved field, should be set to zero */
634 } __attribute__ ((packed));
636 struct cmd_ds_802_11_rf_channel {
637 struct cmd_header hdr;
641 __le16 rftype; /* unused */
642 __le16 reserved; /* unused */
643 u8 channellist[32]; /* unused */
644 } __attribute__ ((packed));
646 struct cmd_ds_802_11_rssi {
647 /* weighting factor */
653 } __attribute__ ((packed));
655 struct cmd_ds_802_11_rssi_rsp {
659 __le16 avgnoisefloor;
660 } __attribute__ ((packed));
662 struct cmd_ds_802_11_mac_address {
663 struct cmd_header hdr;
667 } __attribute__ ((packed));
669 struct cmd_ds_802_11_rf_tx_power {
670 struct cmd_header hdr;
676 } __attribute__ ((packed));
678 struct cmd_ds_802_11_monitor_mode {
681 } __attribute__ ((packed));
683 struct cmd_ds_set_boot2_ver {
684 struct cmd_header hdr;
688 } __attribute__ ((packed));
690 struct cmd_ds_802_11_fw_wake_method {
691 struct cmd_header hdr;
695 } __attribute__ ((packed));
697 struct cmd_ds_802_11_ps_mode {
699 __le16 nullpktinterval;
702 __le16 locallisteninterval;
703 } __attribute__ ((packed));
705 struct cmd_confirm_sleep {
706 struct cmd_header hdr;
709 __le16 nullpktinterval;
712 __le16 locallisteninterval;
713 } __attribute__ ((packed));
715 struct cmd_ds_802_11_data_rate {
716 struct cmd_header hdr;
721 } __attribute__ ((packed));
723 struct cmd_ds_802_11_rate_adapt_rateset {
724 struct cmd_header hdr;
728 } __attribute__ ((packed));
730 struct cmd_ds_802_11_ad_hoc_start {
731 struct cmd_header hdr;
733 u8 ssid[IEEE80211_MAX_SSID_LEN];
736 u8 dtimperiod; /* Reserved on v9 and later */
737 struct ieee_ie_ibss_param_set ibss;
739 struct ieee_ie_ds_param_set ds;
741 __le16 probedelay; /* Reserved on v9 and later */
744 u8 tlv_memory_size_pad[100];
745 } __attribute__ ((packed));
747 struct cmd_ds_802_11_ad_hoc_result {
748 struct cmd_header hdr;
752 } __attribute__ ((packed));
754 struct adhoc_bssdesc {
756 u8 ssid[IEEE80211_MAX_SSID_LEN];
762 struct ieee_ie_ds_param_set ds;
764 struct ieee_ie_ibss_param_set ibss;
769 /* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
770 * Adhoc join command and will cause a binary layout mismatch with
773 } __attribute__ ((packed));
775 struct cmd_ds_802_11_ad_hoc_join {
776 struct cmd_header hdr;
778 struct adhoc_bssdesc bss;
779 __le16 failtimeout; /* Reserved on v9 and later */
780 __le16 probedelay; /* Reserved on v9 and later */
781 } __attribute__ ((packed));
783 struct cmd_ds_802_11_ad_hoc_stop {
784 struct cmd_header hdr;
785 } __attribute__ ((packed));
787 struct cmd_ds_802_11_enable_rsn {
788 struct cmd_header hdr;
792 } __attribute__ ((packed));
794 struct MrvlIEtype_keyParamSet {
798 /* length of Payload */
801 /* type of key: WEP=0, TKIP=1, AES=2 */
804 /* key control Info specific to a keytypeid */
810 /* key material of size keylen */
812 } __attribute__ ((packed));
814 #define MAX_WOL_RULES 16
816 struct host_wol_rule {
824 } __attribute__ ((packed));
829 uint8_t no_rules_in_cmd;
831 struct host_wol_rule rule[MAX_WOL_RULES];
832 } __attribute__ ((packed));
834 struct cmd_ds_host_sleep {
835 struct cmd_header hdr;
839 struct wol_config wol_conf;
840 } __attribute__ ((packed));
844 struct cmd_ds_802_11_key_material {
845 struct cmd_header hdr;
848 struct MrvlIEtype_keyParamSet keyParamSet[2];
849 } __attribute__ ((packed));
851 struct cmd_ds_802_11_eeprom_access {
852 struct cmd_header hdr;
856 /* firmware says it returns a maximum of 20 bytes */
857 #define LBS_EEPROM_READ_LEN 20
858 u8 value[LBS_EEPROM_READ_LEN];
859 } __attribute__ ((packed));
861 struct cmd_ds_802_11_tpc_cfg {
862 struct cmd_header hdr;
870 } __attribute__ ((packed));
873 struct cmd_ds_802_11_pa_cfg {
874 struct cmd_header hdr;
881 } __attribute__ ((packed));
884 struct cmd_ds_802_11_led_ctrl {
888 } __attribute__ ((packed));
890 struct cmd_ds_802_11_afc {
898 __le16 timing_offset; /* signed */
899 __le16 carrier_offset; /* signed */
902 } __attribute__ ((packed));
904 struct cmd_tx_rate_query {
906 } __attribute__ ((packed));
908 struct cmd_ds_get_tsf {
910 } __attribute__ ((packed));
912 struct cmd_ds_bt_access {
917 } __attribute__ ((packed));
919 struct cmd_ds_fwt_access {
937 } __attribute__ ((packed));
939 struct cmd_ds_mesh_config {
940 struct cmd_header hdr;
946 u8 data[128]; /* last position reserved */
947 } __attribute__ ((packed));
949 struct cmd_ds_mesh_access {
950 struct cmd_header hdr;
953 __le32 data[32]; /* last position reserved */
954 } __attribute__ ((packed));
956 /* Number of stats counters returned by the firmware */
957 #define MESH_STATS_NUM 8
959 struct cmd_ds_command {
968 struct cmd_ds_802_11_ps_mode psmode;
969 struct cmd_ds_802_11_monitor_mode monitor;
970 struct cmd_ds_802_11_rssi rssi;
971 struct cmd_ds_802_11_rssi_rsp rssirsp;
972 struct cmd_ds_mac_reg_access macreg;
973 struct cmd_ds_bbp_reg_access bbpreg;
974 struct cmd_ds_rf_reg_access rfreg;
976 struct cmd_ds_802_11d_domain_info domaininfo;
977 struct cmd_ds_802_11d_domain_info domaininforesp;
979 struct cmd_ds_802_11_tpc_cfg tpccfg;
980 struct cmd_ds_802_11_afc afc;
981 struct cmd_ds_802_11_led_ctrl ledgpio;
983 struct cmd_ds_bt_access bt;
984 struct cmd_ds_fwt_access fwt;
985 struct cmd_ds_802_11_beacon_control bcn_ctrl;
987 } __attribute__ ((packed));