drivers/net/wireless/rt2x00/rt61pci.c

   1 /*
   2         Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt61pci
  23         Abstract: rt61pci device specific routines.
  24         Supported chipsets: RT2561, RT2561s, RT2661.
  25  */
  26
  27 #include <linux/crc-itu-t.h>
  28 #include <linux/delay.h>
  29 #include <linux/etherdevice.h>
  30 #include <linux/init.h>
  31 #include <linux/kernel.h>
  32 #include <linux/module.h>
  33 #include <linux/pci.h>
  34 #include <linux/eeprom_93cx6.h>
  35
  36 #include "rt2x00.h"
  37 #include "rt2x00pci.h"
  38 #include "rt61pci.h"
  39
  40 /*
  41  * Allow hardware encryption to be disabled.
  42  */
  43 static int modparam_nohwcrypt = 0;
  44 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
  45 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
  46
  47 /*
  48  * Register access.
  49  * BBP and RF register require indirect register access,
  50  * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
  51  * These indirect registers work with busy bits,
  52  * and we will try maximal REGISTER_BUSY_COUNT times to access
  53  * the register while taking a REGISTER_BUSY_DELAY us delay
  54  * between each attempt. When the busy bit is still set at that time,
  55  * the access attempt is considered to have failed,
  56  * and we will print an error.
  57  */
  58 #define WAIT_FOR_BBP(__dev, __reg) \
  59         rt2x00pci_regbusy_read((__dev), PHY_CSR3, PHY_CSR3_BUSY, (__reg))
  60 #define WAIT_FOR_RF(__dev, __reg) \
  61         rt2x00pci_regbusy_read((__dev), PHY_CSR4, PHY_CSR4_BUSY, (__reg))
  62 #define WAIT_FOR_MCU(__dev, __reg) \
  63         rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
  64                                H2M_MAILBOX_CSR_OWNER, (__reg))
  65
  66 static void rt61pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  67                               const unsigned int word, const u8 value)
  68 {
  69         u32 reg;
  70
  71         mutex_lock(&rt2x00dev->csr_mutex);
  72
  73         /*
  74          * Wait until the BBP becomes available, afterwards we
  75          * can safely write the new data into the register.
  76          */
  77         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
  78                 reg = 0;
  79                 rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
  80                 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
  81                 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
  82                 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
  83
  84                 rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
  85         }
  86
  87         mutex_unlock(&rt2x00dev->csr_mutex);
  88 }
  89
  90 static void rt61pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  91                              const unsigned int word, u8 *value)
  92 {
  93         u32 reg;
  94
  95         mutex_lock(&rt2x00dev->csr_mutex);
  96
  97         /*
  98          * Wait until the BBP becomes available, afterwards we
  99          * can safely write the read request into the register.
 100          * After the data has been written, we wait until hardware
 101          * returns the correct value, if at any time the register
 102          * doesn't become available in time, reg will be 0xffffffff
 103          * which means we return 0xff to the caller.
 104          */
 105         if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
 106                 reg = 0;
 107                 rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
 108                 rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
 109                 rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
 110
 111                 rt2x00pci_register_write(rt2x00dev, PHY_CSR3, reg);
 112
 113                 WAIT_FOR_BBP(rt2x00dev, &reg);
 114         }
 115
 116         *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
 117
 118         mutex_unlock(&rt2x00dev->csr_mutex);
 119 }
 120
 121 static void rt61pci_rf_write(struct rt2x00_dev *rt2x00dev,
 122                              const unsigned int word, const u32 value)
 123 {
 124         u32 reg;
 125
 126         mutex_lock(&rt2x00dev->csr_mutex);
 127
 128         /*
 129          * Wait until the RF becomes available, afterwards we
 130          * can safely write the new data into the register.
 131          */
 132         if (WAIT_FOR_RF(rt2x00dev, &reg)) {
 133                 reg = 0;
 134                 rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
 135                 rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS, 21);
 136                 rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
 137                 rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
 138
 139                 rt2x00pci_register_write(rt2x00dev, PHY_CSR4, reg);
 140                 rt2x00_rf_write(rt2x00dev, word, value);
 141         }
 142
 143         mutex_unlock(&rt2x00dev->csr_mutex);
 144 }
 145
 146 static void rt61pci_mcu_request(struct rt2x00_dev *rt2x00dev,
 147                                 const u8 command, const u8 token,
 148                                 const u8 arg0, const u8 arg1)
 149 {
 150         u32 reg;
 151
 152         mutex_lock(&rt2x00dev->csr_mutex);
 153
 154         /*
 155          * Wait until the MCU becomes available, afterwards we
 156          * can safely write the new data into the register.
 157          */
 158         if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
 159                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
 160                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
 161                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
 162                 rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
 163                 rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
 164
 165                 rt2x00pci_register_read(rt2x00dev, HOST_CMD_CSR, &reg);
 166                 rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
 167                 rt2x00_set_field32(&reg, HOST_CMD_CSR_INTERRUPT_MCU, 1);
 168                 rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
 169         }
 170
 171         mutex_unlock(&rt2x00dev->csr_mutex);
 172
 173 }
 174
 175 static void rt61pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 176 {
 177         struct rt2x00_dev *rt2x00dev = eeprom->data;
 178         u32 reg;
 179
 180         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
 181
 182         eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
 183         eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
 184         eeprom->reg_data_clock =
 185             !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
 186         eeprom->reg_chip_select =
 187             !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
 188 }
 189
 190 static void rt61pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 191 {
 192         struct rt2x00_dev *rt2x00dev = eeprom->data;
 193         u32 reg = 0;
 194
 195         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
 196         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
 197         rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
 198                            !!eeprom->reg_data_clock);
 199         rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
 200                            !!eeprom->reg_chip_select);
 201
 202         rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
 203 }
 204
 205 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 206 static const struct rt2x00debug rt61pci_rt2x00debug = {
 207         .owner  = THIS_MODULE,
 208         .csr    = {
 209                 .read           = rt2x00pci_register_read,
 210                 .write          = rt2x00pci_register_write,
 211                 .flags          = RT2X00DEBUGFS_OFFSET,
 212                 .word_base      = CSR_REG_BASE,
 213                 .word_size      = sizeof(u32),
 214                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 215         },
 216         .eeprom = {
 217                 .read           = rt2x00_eeprom_read,
 218                 .write          = rt2x00_eeprom_write,
 219                 .word_base      = EEPROM_BASE,
 220                 .word_size      = sizeof(u16),
 221                 .word_count     = EEPROM_SIZE / sizeof(u16),
 222         },
 223         .bbp    = {
 224                 .read           = rt61pci_bbp_read,
 225                 .write          = rt61pci_bbp_write,
 226                 .word_base      = BBP_BASE,
 227                 .word_size      = sizeof(u8),
 228                 .word_count     = BBP_SIZE / sizeof(u8),
 229         },
 230         .rf     = {
 231                 .read           = rt2x00_rf_read,
 232                 .write          = rt61pci_rf_write,
 233                 .word_base      = RF_BASE,
 234                 .word_size      = sizeof(u32),
 235                 .word_count     = RF_SIZE / sizeof(u32),
 236         },
 237 };
 238 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 239
 240 static int rt61pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 241 {
 242         u32 reg;
 243
 244         rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 245         return rt2x00_get_field32(reg, MAC_CSR13_BIT5);
 246 }
 247
 248 #ifdef CONFIG_RT2X00_LIB_LEDS
 249 static void rt61pci_brightness_set(struct led_classdev *led_cdev,
 250                                    enum led_brightness brightness)
 251 {
 252         struct rt2x00_led *led =
 253             container_of(led_cdev, struct rt2x00_led, led_dev);
 254         unsigned int enabled = brightness != LED_OFF;
 255         unsigned int a_mode =
 256             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 257         unsigned int bg_mode =
 258             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 259
 260         if (led->type == LED_TYPE_RADIO) {
 261                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 262                                    MCU_LEDCS_RADIO_STATUS, enabled);
 263
 264                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
 265                                     (led->rt2x00dev->led_mcu_reg & 0xff),
 266                                     ((led->rt2x00dev->led_mcu_reg >> 8)));
 267         } else if (led->type == LED_TYPE_ASSOC) {
 268                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 269                                    MCU_LEDCS_LINK_BG_STATUS, bg_mode);
 270                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
 271                                    MCU_LEDCS_LINK_A_STATUS, a_mode);
 272
 273                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff,
 274                                     (led->rt2x00dev->led_mcu_reg & 0xff),
 275                                     ((led->rt2x00dev->led_mcu_reg >> 8)));
 276         } else if (led->type == LED_TYPE_QUALITY) {
 277                 /*
 278                  * The brightness is divided into 6 levels (0 - 5),
 279                  * this means we need to convert the brightness
 280                  * argument into the matching level within that range.
 281                  */
 282                 rt61pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
 283                                     brightness / (LED_FULL / 6), 0);
 284         }
 285 }
 286
 287 static int rt61pci_blink_set(struct led_classdev *led_cdev,
 288                              unsigned long *delay_on,
 289                              unsigned long *delay_off)
 290 {
 291         struct rt2x00_led *led =
 292             container_of(led_cdev, struct rt2x00_led, led_dev);
 293         u32 reg;
 294
 295         rt2x00pci_register_read(led->rt2x00dev, MAC_CSR14, &reg);
 296         rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
 297         rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
 298         rt2x00pci_register_write(led->rt2x00dev, MAC_CSR14, reg);
 299
 300         return 0;
 301 }
 302
 303 static void rt61pci_init_led(struct rt2x00_dev *rt2x00dev,
 304                              struct rt2x00_led *led,
 305                              enum led_type type)
 306 {
 307         led->rt2x00dev = rt2x00dev;
 308         led->type = type;
 309         led->led_dev.brightness_set = rt61pci_brightness_set;
 310         led->led_dev.blink_set = rt61pci_blink_set;
 311         led->flags = LED_INITIALIZED;
 312 }
 313 #endif /* CONFIG_RT2X00_LIB_LEDS */
 314
 315 /*
 316  * Configuration handlers.
 317  */
 318 static int rt61pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
 319                                      struct rt2x00lib_crypto *crypto,
 320                                      struct ieee80211_key_conf *key)
 321 {
 322         struct hw_key_entry key_entry;
 323         struct rt2x00_field32 field;
 324         u32 mask;
 325         u32 reg;
 326
 327         if (crypto->cmd == SET_KEY) {
 328                 /*
 329                  * rt2x00lib can't determine the correct free
 330                  * key_idx for shared keys. We have 1 register
 331                  * with key valid bits. The goal is simple, read
 332                  * the register, if that is full we have no slots
 333                  * left.
 334                  * Note that each BSS is allowed to have up to 4
 335                  * shared keys, so put a mask over the allowed
 336                  * entries.
 337                  */
 338                 mask = (0xf << crypto->bssidx);
 339
 340                 rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
 341                 reg &= mask;
 342
 343                 if (reg && reg == mask)
 344                         return -ENOSPC;
 345
 346                 key->hw_key_idx += reg ? ffz(reg) : 0;
 347
 348                 /*
 349                  * Upload key to hardware
 350                  */
 351                 memcpy(key_entry.key, crypto->key,
 352                        sizeof(key_entry.key));
 353                 memcpy(key_entry.tx_mic, crypto->tx_mic,
 354                        sizeof(key_entry.tx_mic));
 355                 memcpy(key_entry.rx_mic, crypto->rx_mic,
 356                        sizeof(key_entry.rx_mic));
 357
 358                 reg = SHARED_KEY_ENTRY(key->hw_key_idx);
 359                 rt2x00pci_register_multiwrite(rt2x00dev, reg,
 360                                               &key_entry, sizeof(key_entry));
 361
 362                 /*
 363                  * The cipher types are stored over 2 registers.
 364                  * bssidx 0 and 1 keys are stored in SEC_CSR1 and
 365                  * bssidx 1 and 2 keys are stored in SEC_CSR5.
 366                  * Using the correct defines correctly will cause overhead,
 367                  * so just calculate the correct offset.
 368                  */
 369                 if (key->hw_key_idx < 8) {
 370                         field.bit_offset = (3 * key->hw_key_idx);
 371                         field.bit_mask = 0x7 << field.bit_offset;
 372
 373                         rt2x00pci_register_read(rt2x00dev, SEC_CSR1, &reg);
 374                         rt2x00_set_field32(&reg, field, crypto->cipher);
 375                         rt2x00pci_register_write(rt2x00dev, SEC_CSR1, reg);
 376                 } else {
 377                         field.bit_offset = (3 * (key->hw_key_idx - 8));
 378                         field.bit_mask = 0x7 << field.bit_offset;
 379
 380                         rt2x00pci_register_read(rt2x00dev, SEC_CSR5, &reg);
 381                         rt2x00_set_field32(&reg, field, crypto->cipher);
 382                         rt2x00pci_register_write(rt2x00dev, SEC_CSR5, reg);
 383                 }
 384
 385                 /*
 386                  * The driver does not support the IV/EIV generation
 387                  * in hardware. However it doesn't support the IV/EIV
 388                  * inside the ieee80211 frame either, but requires it
 389                  * to be provided separately for the descriptor.
 390                  * rt2x00lib will cut the IV/EIV data out of all frames
 391                  * given to us by mac80211, but we must tell mac80211
 392                  * to generate the IV/EIV data.
 393                  */
 394                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 395         }
 396
 397         /*
 398          * SEC_CSR0 contains only single-bit fields to indicate
 399          * a particular key is valid. Because using the FIELD32()
 400          * defines directly will cause a lot of overhead, we use
 401          * a calculation to determine the correct bit directly.
 402          */
 403         mask = 1 << key->hw_key_idx;
 404
 405         rt2x00pci_register_read(rt2x00dev, SEC_CSR0, &reg);
 406         if (crypto->cmd == SET_KEY)
 407                 reg |= mask;
 408         else if (crypto->cmd == DISABLE_KEY)
 409                 reg &= ~mask;
 410         rt2x00pci_register_write(rt2x00dev, SEC_CSR0, reg);
 411
 412         return 0;
 413 }
 414
 415 static int rt61pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
 416                                        struct rt2x00lib_crypto *crypto,
 417                                        struct ieee80211_key_conf *key)
 418 {
 419         struct hw_pairwise_ta_entry addr_entry;
 420         struct hw_key_entry key_entry;
 421         u32 mask;
 422         u32 reg;
 423
 424         if (crypto->cmd == SET_KEY) {
 425                 /*
 426                  * rt2x00lib can't determine the correct free
 427                  * key_idx for pairwise keys. We have 2 registers
 428                  * with key valid bits. The goal is simple: read
 429                  * the first register. If that is full, move to
 430                  * the next register.
 431                  * When both registers are full, we drop the key.
 432                  * Otherwise, we use the first invalid entry.
 433                  */
 434                 rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
 435                 if (reg && reg == ~0) {
 436                         key->hw_key_idx = 32;
 437                         rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
 438                         if (reg && reg == ~0)
 439                                 return -ENOSPC;
 440                 }
 441
 442                 key->hw_key_idx += reg ? ffz(reg) : 0;
 443
 444                 /*
 445                  * Upload key to hardware
 446                  */
 447                 memcpy(key_entry.key, crypto->key,
 448                        sizeof(key_entry.key));
 449                 memcpy(key_entry.tx_mic, crypto->tx_mic,
 450                        sizeof(key_entry.tx_mic));
 451                 memcpy(key_entry.rx_mic, crypto->rx_mic,
 452                        sizeof(key_entry.rx_mic));
 453
 454                 memset(&addr_entry, 0, sizeof(addr_entry));
 455                 memcpy(&addr_entry, crypto->address, ETH_ALEN);
 456                 addr_entry.cipher = crypto->cipher;
 457
 458                 reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
 459                 rt2x00pci_register_multiwrite(rt2x00dev, reg,
 460                                               &key_entry, sizeof(key_entry));
 461
 462                 reg = PAIRWISE_TA_ENTRY(key->hw_key_idx);
 463                 rt2x00pci_register_multiwrite(rt2x00dev, reg,
 464                                               &addr_entry, sizeof(addr_entry));
 465
 466                 /*
 467                  * Enable pairwise lookup table for given BSS idx.
 468                  * Without this, received frames will not be decrypted
 469                  * by the hardware.
 470                  */
 471                 rt2x00pci_register_read(rt2x00dev, SEC_CSR4, &reg);
 472                 reg |= (1 << crypto->bssidx);
 473                 rt2x00pci_register_write(rt2x00dev, SEC_CSR4, reg);
 474
 475                 /*
 476                  * The driver does not support the IV/EIV generation
 477                  * in hardware. However it doesn't support the IV/EIV
 478                  * inside the ieee80211 frame either, but requires it
 479                  * to be provided seperately for the descriptor.
 480                  * rt2x00lib will cut the IV/EIV data out of all frames
 481                  * given to us by mac80211, but we must tell mac80211
 482                  * to generate the IV/EIV data.
 483                  */
 484                 key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
 485         }
 486
 487         /*
 488          * SEC_CSR2 and SEC_CSR3 contain only single-bit fields to indicate
 489          * a particular key is valid. Because using the FIELD32()
 490          * defines directly will cause a lot of overhead, we use
 491          * a calculation to determine the correct bit directly.
 492          */
 493         if (key->hw_key_idx < 32) {
 494                 mask = 1 << key->hw_key_idx;
 495
 496                 rt2x00pci_register_read(rt2x00dev, SEC_CSR2, &reg);
 497                 if (crypto->cmd == SET_KEY)
 498                         reg |= mask;
 499                 else if (crypto->cmd == DISABLE_KEY)
 500                         reg &= ~mask;
 501                 rt2x00pci_register_write(rt2x00dev, SEC_CSR2, reg);
 502         } else {
 503                 mask = 1 << (key->hw_key_idx - 32);
 504
 505                 rt2x00pci_register_read(rt2x00dev, SEC_CSR3, &reg);
 506                 if (crypto->cmd == SET_KEY)
 507                         reg |= mask;
 508                 else if (crypto->cmd == DISABLE_KEY)
 509                         reg &= ~mask;
 510                 rt2x00pci_register_write(rt2x00dev, SEC_CSR3, reg);
 511         }
 512
 513         return 0;
 514 }
 515
 516 static void rt61pci_config_filter(struct rt2x00_dev *rt2x00dev,
 517                                   const unsigned int filter_flags)
 518 {
 519         u32 reg;
 520
 521         /*
 522          * Start configuration steps.
 523          * Note that the version error will always be dropped
 524          * and broadcast frames will always be accepted since
 525          * there is no filter for it at this time.
 526          */
 527         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 528         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
 529                            !(filter_flags & FIF_FCSFAIL));
 530         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
 531                            !(filter_flags & FIF_PLCPFAIL));
 532         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
 533                            !(filter_flags & (FIF_CONTROL | FIF_PSPOLL)));
 534         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
 535                            !(filter_flags & FIF_PROMISC_IN_BSS));
 536         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
 537                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 538                            !rt2x00dev->intf_ap_count);
 539         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
 540         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
 541                            !(filter_flags & FIF_ALLMULTI));
 542         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
 543         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
 544                            !(filter_flags & FIF_CONTROL));
 545         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 546 }
 547
 548 static void rt61pci_config_intf(struct rt2x00_dev *rt2x00dev,
 549                                 struct rt2x00_intf *intf,
 550                                 struct rt2x00intf_conf *conf,
 551                                 const unsigned int flags)
 552 {
 553         unsigned int beacon_base;
 554         u32 reg;
 555
 556         if (flags & CONFIG_UPDATE_TYPE) {
 557                 /*
 558                  * Clear current synchronisation setup.
 559                  * For the Beacon base registers, we only need to clear
 560                  * the first byte since that byte contains the VALID and OWNER
 561                  * bits which (when set to 0) will invalidate the entire beacon.
 562                  */
 563                 beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
 564                 rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
 565
 566                 /*
 567                  * Enable synchronisation.
 568                  */
 569                 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
 570                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
 571                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
 572                 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
 573                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 574         }
 575
 576         if (flags & CONFIG_UPDATE_MAC) {
 577                 reg = le32_to_cpu(conf->mac[1]);
 578                 rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
 579                 conf->mac[1] = cpu_to_le32(reg);
 580
 581                 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR2,
 582                                               conf->mac, sizeof(conf->mac));
 583         }
 584
 585         if (flags & CONFIG_UPDATE_BSSID) {
 586                 reg = le32_to_cpu(conf->bssid[1]);
 587                 rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
 588                 conf->bssid[1] = cpu_to_le32(reg);
 589
 590                 rt2x00pci_register_multiwrite(rt2x00dev, MAC_CSR4,
 591                                               conf->bssid, sizeof(conf->bssid));
 592         }
 593 }
 594
 595 static void rt61pci_config_erp(struct rt2x00_dev *rt2x00dev,
 596                                struct rt2x00lib_erp *erp)
 597 {
 598         u32 reg;
 599
 600         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
 601         rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, 0x32);
 602         rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
 603         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
 604
 605         rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
 606         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
 607         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
 608                            !!erp->short_preamble);
 609         rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 610
 611         rt2x00pci_register_write(rt2x00dev, TXRX_CSR5, erp->basic_rates);
 612
 613         rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
 614         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
 615                            erp->beacon_int * 16);
 616         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 617
 618         rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
 619         rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, erp->slot_time);
 620         rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
 621
 622         rt2x00pci_register_read(rt2x00dev, MAC_CSR8, &reg);
 623         rt2x00_set_field32(&reg, MAC_CSR8_SIFS, erp->sifs);
 624         rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
 625         rt2x00_set_field32(&reg, MAC_CSR8_EIFS, erp->eifs);
 626         rt2x00pci_register_write(rt2x00dev, MAC_CSR8, reg);
 627 }
 628
 629 static void rt61pci_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
 630                                       struct antenna_setup *ant)
 631 {
 632         u8 r3;
 633         u8 r4;
 634         u8 r77;
 635
 636         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 637         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 638         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 639
 640         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF5325));
 641
 642         /*
 643          * Configure the RX antenna.
 644          */
 645         switch (ant->rx) {
 646         case ANTENNA_HW_DIVERSITY:
 647                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 648                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 649                                   (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ));
 650                 break;
 651         case ANTENNA_A:
 652                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 653                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 654                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 655                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 656                 else
 657                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 658                 break;
 659         case ANTENNA_B:
 660         default:
 661                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 662                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
 663                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
 664                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 665                 else
 666                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 667                 break;
 668         }
 669
 670         rt61pci_bbp_write(rt2x00dev, 77, r77);
 671         rt61pci_bbp_write(rt2x00dev, 3, r3);
 672         rt61pci_bbp_write(rt2x00dev, 4, r4);
 673 }
 674
 675 static void rt61pci_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
 676                                       struct antenna_setup *ant)
 677 {
 678         u8 r3;
 679         u8 r4;
 680         u8 r77;
 681
 682         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 683         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 684         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 685
 686         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, rt2x00_rf(rt2x00dev, RF2529));
 687         rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
 688                           !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
 689
 690         /*
 691          * Configure the RX antenna.
 692          */
 693         switch (ant->rx) {
 694         case ANTENNA_HW_DIVERSITY:
 695                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
 696                 break;
 697         case ANTENNA_A:
 698                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 699                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 700                 break;
 701         case ANTENNA_B:
 702         default:
 703                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 704                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 705                 break;
 706         }
 707
 708         rt61pci_bbp_write(rt2x00dev, 77, r77);
 709         rt61pci_bbp_write(rt2x00dev, 3, r3);
 710         rt61pci_bbp_write(rt2x00dev, 4, r4);
 711 }
 712
 713 static void rt61pci_config_antenna_2529_rx(struct rt2x00_dev *rt2x00dev,
 714                                            const int p1, const int p2)
 715 {
 716         u32 reg;
 717
 718         rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
 719
 720         rt2x00_set_field32(&reg, MAC_CSR13_BIT4, p1);
 721         rt2x00_set_field32(&reg, MAC_CSR13_BIT12, 0);
 722
 723         rt2x00_set_field32(&reg, MAC_CSR13_BIT3, !p2);
 724         rt2x00_set_field32(&reg, MAC_CSR13_BIT11, 0);
 725
 726         rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
 727 }
 728
 729 static void rt61pci_config_antenna_2529(struct rt2x00_dev *rt2x00dev,
 730                                         struct antenna_setup *ant)
 731 {
 732         u8 r3;
 733         u8 r4;
 734         u8 r77;
 735
 736         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 737         rt61pci_bbp_read(rt2x00dev, 4, &r4);
 738         rt61pci_bbp_read(rt2x00dev, 77, &r77);
 739
 740         /*
 741          * Configure the RX antenna.
 742          */
 743         switch (ant->rx) {
 744         case ANTENNA_A:
 745                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 746                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
 747                 rt61pci_config_antenna_2529_rx(rt2x00dev, 0, 0);
 748                 break;
 749         case ANTENNA_HW_DIVERSITY:
 750                 /*
 751                  * FIXME: Antenna selection for the rf 2529 is very confusing
 752                  * in the legacy driver. Just default to antenna B until the
 753                  * legacy code can be properly translated into rt2x00 code.
 754                  */
 755         case ANTENNA_B:
 756         default:
 757                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
 758                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
 759                 rt61pci_config_antenna_2529_rx(rt2x00dev, 1, 1);
 760                 break;
 761         }
 762
 763         rt61pci_bbp_write(rt2x00dev, 77, r77);
 764         rt61pci_bbp_write(rt2x00dev, 3, r3);
 765         rt61pci_bbp_write(rt2x00dev, 4, r4);
 766 }
 767
 768 struct antenna_sel {
 769         u8 word;
 770         /*
 771          * value[0] -> non-LNA
 772          * value[1] -> LNA
 773          */
 774         u8 value[2];
 775 };
 776
 777 static const struct antenna_sel antenna_sel_a[] = {
 778         { 96,  { 0x58, 0x78 } },
 779         { 104, { 0x38, 0x48 } },
 780         { 75,  { 0xfe, 0x80 } },
 781         { 86,  { 0xfe, 0x80 } },
 782         { 88,  { 0xfe, 0x80 } },
 783         { 35,  { 0x60, 0x60 } },
 784         { 97,  { 0x58, 0x58 } },
 785         { 98,  { 0x58, 0x58 } },
 786 };
 787
 788 static const struct antenna_sel antenna_sel_bg[] = {
 789         { 96,  { 0x48, 0x68 } },
 790         { 104, { 0x2c, 0x3c } },
 791         { 75,  { 0xfe, 0x80 } },
 792         { 86,  { 0xfe, 0x80 } },
 793         { 88,  { 0xfe, 0x80 } },
 794         { 35,  { 0x50, 0x50 } },
 795         { 97,  { 0x48, 0x48 } },
 796         { 98,  { 0x48, 0x48 } },
 797 };
 798
 799 static void rt61pci_config_ant(struct rt2x00_dev *rt2x00dev,
 800                                struct antenna_setup *ant)
 801 {
 802         const struct antenna_sel *sel;
 803         unsigned int lna;
 804         unsigned int i;
 805         u32 reg;
 806
 807         /*
 808          * We should never come here because rt2x00lib is supposed
 809          * to catch this and send us the correct antenna explicitely.
 810          */
 811         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 812                ant->tx == ANTENNA_SW_DIVERSITY);
 813
 814         if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
 815                 sel = antenna_sel_a;
 816                 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
 817         } else {
 818                 sel = antenna_sel_bg;
 819                 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
 820         }
 821
 822         for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
 823                 rt61pci_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
 824
 825         rt2x00pci_register_read(rt2x00dev, PHY_CSR0, &reg);
 826
 827         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
 828                            rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
 829         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
 830                            rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
 831
 832         rt2x00pci_register_write(rt2x00dev, PHY_CSR0, reg);
 833
 834         if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325))
 835                 rt61pci_config_antenna_5x(rt2x00dev, ant);
 836         else if (rt2x00_rf(rt2x00dev, RF2527))
 837                 rt61pci_config_antenna_2x(rt2x00dev, ant);
 838         else if (rt2x00_rf(rt2x00dev, RF2529)) {
 839                 if (test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags))
 840                         rt61pci_config_antenna_2x(rt2x00dev, ant);
 841                 else
 842                         rt61pci_config_antenna_2529(rt2x00dev, ant);
 843         }
 844 }
 845
 846 static void rt61pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
 847                                     struct rt2x00lib_conf *libconf)
 848 {
 849         u16 eeprom;
 850         short lna_gain = 0;
 851
 852         if (libconf->conf->channel->band == IEEE80211_BAND_2GHZ) {
 853                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
 854                         lna_gain += 14;
 855
 856                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
 857                 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
 858         } else {
 859                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
 860                         lna_gain += 14;
 861
 862                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
 863                 lna_gain -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
 864         }
 865
 866         rt2x00dev->lna_gain = lna_gain;
 867 }
 868
 869 static void rt61pci_config_channel(struct rt2x00_dev *rt2x00dev,
 870                                    struct rf_channel *rf, const int txpower)
 871 {
 872         u8 r3;
 873         u8 r94;
 874         u8 smart;
 875
 876         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 877         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
 878
 879         smart = !(rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF2527));
 880
 881         rt61pci_bbp_read(rt2x00dev, 3, &r3);
 882         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
 883         rt61pci_bbp_write(rt2x00dev, 3, r3);
 884
 885         r94 = 6;
 886         if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
 887                 r94 += txpower - MAX_TXPOWER;
 888         else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
 889                 r94 += txpower;
 890         rt61pci_bbp_write(rt2x00dev, 94, r94);
 891
 892         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 893         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 894         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 895         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 896
 897         udelay(200);
 898
 899         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 900         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 901         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
 902         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 903
 904         udelay(200);
 905
 906         rt61pci_rf_write(rt2x00dev, 1, rf->rf1);
 907         rt61pci_rf_write(rt2x00dev, 2, rf->rf2);
 908         rt61pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
 909         rt61pci_rf_write(rt2x00dev, 4, rf->rf4);
 910
 911         msleep(1);
 912 }
 913
 914 static void rt61pci_config_txpower(struct rt2x00_dev *rt2x00dev,
 915                                    const int txpower)
 916 {
 917         struct rf_channel rf;
 918
 919         rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
 920         rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
 921         rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
 922         rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
 923
 924         rt61pci_config_channel(rt2x00dev, &rf, txpower);
 925 }
 926
 927 static void rt61pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
 928                                     struct rt2x00lib_conf *libconf)
 929 {
 930         u32 reg;
 931
 932         rt2x00pci_register_read(rt2x00dev, TXRX_CSR4, &reg);
 933         rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT,
 934                            libconf->conf->long_frame_max_tx_count);
 935         rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT,
 936                            libconf->conf->short_frame_max_tx_count);
 937         rt2x00pci_register_write(rt2x00dev, TXRX_CSR4, reg);
 938 }
 939
 940 static void rt61pci_config_ps(struct rt2x00_dev *rt2x00dev,
 941                                 struct rt2x00lib_conf *libconf)
 942 {
 943         enum dev_state state =
 944             (libconf->conf->flags & IEEE80211_CONF_PS) ?
 945                 STATE_SLEEP : STATE_AWAKE;
 946         u32 reg;
 947
 948         if (state == STATE_SLEEP) {
 949                 rt2x00pci_register_read(rt2x00dev, MAC_CSR11, &reg);
 950                 rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN,
 951                                    rt2x00dev->beacon_int - 10);
 952                 rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP,
 953                                    libconf->conf->listen_interval - 1);
 954                 rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 5);
 955
 956                 /* We must first disable autowake before it can be enabled */
 957                 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
 958                 rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg);
 959
 960                 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 1);
 961                 rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg);
 962
 963                 rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000005);
 964                 rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x0000001c);
 965                 rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000060);
 966
 967                 rt61pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 0);
 968         } else {
 969                 rt2x00pci_register_read(rt2x00dev, MAC_CSR11, &reg);
 970                 rt2x00_set_field32(&reg, MAC_CSR11_DELAY_AFTER_TBCN, 0);
 971                 rt2x00_set_field32(&reg, MAC_CSR11_TBCN_BEFORE_WAKEUP, 0);
 972                 rt2x00_set_field32(&reg, MAC_CSR11_AUTOWAKE, 0);
 973                 rt2x00_set_field32(&reg, MAC_CSR11_WAKEUP_LATENCY, 0);
 974                 rt2x00pci_register_write(rt2x00dev, MAC_CSR11, reg);
 975
 976                 rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007);
 977                 rt2x00pci_register_write(rt2x00dev, IO_CNTL_CSR, 0x00000018);
 978                 rt2x00pci_register_write(rt2x00dev, PCI_USEC_CSR, 0x00000020);
 979
 980                 rt61pci_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
 981         }
 982 }
 983
 984 static void rt61pci_config(struct rt2x00_dev *rt2x00dev,
 985                            struct rt2x00lib_conf *libconf,
 986                            const unsigned int flags)
 987 {
 988         /* Always recalculate LNA gain before changing configuration */
 989         rt61pci_config_lna_gain(rt2x00dev, libconf);
 990
 991         if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
 992                 rt61pci_config_channel(rt2x00dev, &libconf->rf,
 993                                        libconf->conf->power_level);
 994         if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
 995             !(flags & IEEE80211_CONF_CHANGE_CHANNEL))
 996                 rt61pci_config_txpower(rt2x00dev, libconf->conf->power_level);
 997         if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
 998                 rt61pci_config_retry_limit(rt2x00dev, libconf);
 999         if (flags & IEEE80211_CONF_CHANGE_PS)
1000                 rt61pci_config_ps(rt2x00dev, libconf);
1001 }
1002
1003 /*
1004  * Link tuning
1005  */
1006 static void rt61pci_link_stats(struct rt2x00_dev *rt2x00dev,
1007                                struct link_qual *qual)
1008 {
1009         u32 reg;
1010
1011         /*
1012          * Update FCS error count from register.
1013          */
1014         rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
1015         qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
1016
1017         /*
1018          * Update False CCA count from register.
1019          */
1020         rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
1021         qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
1022 }
1023
1024 static inline void rt61pci_set_vgc(struct rt2x00_dev *rt2x00dev,
1025                                    struct link_qual *qual, u8 vgc_level)
1026 {
1027         if (qual->vgc_level != vgc_level) {
1028                 rt61pci_bbp_write(rt2x00dev, 17, vgc_level);
1029                 qual->vgc_level = vgc_level;
1030                 qual->vgc_level_reg = vgc_level;
1031         }
1032 }
1033
1034 static void rt61pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
1035                                 struct link_qual *qual)
1036 {
1037         rt61pci_set_vgc(rt2x00dev, qual, 0x20);
1038 }
1039
1040 static void rt61pci_link_tuner(struct rt2x00_dev *rt2x00dev,
1041                                struct link_qual *qual, const u32 count)
1042 {
1043         u8 up_bound;
1044         u8 low_bound;
1045
1046         /*
1047          * Determine r17 bounds.
1048          */
1049         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1050                 low_bound = 0x28;
1051                 up_bound = 0x48;
1052                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1053                         low_bound += 0x10;
1054                         up_bound += 0x10;
1055                 }
1056         } else {
1057                 low_bound = 0x20;
1058                 up_bound = 0x40;
1059                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
1060                         low_bound += 0x10;
1061                         up_bound += 0x10;
1062                 }
1063         }
1064
1065         /*
1066          * If we are not associated, we should go straight to the
1067          * dynamic CCA tuning.
1068          */
1069         if (!rt2x00dev->intf_associated)
1070                 goto dynamic_cca_tune;
1071
1072         /*
1073          * Special big-R17 for very short distance
1074          */
1075         if (qual->rssi >= -35) {
1076                 rt61pci_set_vgc(rt2x00dev, qual, 0x60);
1077                 return;
1078         }
1079
1080         /*
1081          * Special big-R17 for short distance
1082          */
1083         if (qual->rssi >= -58) {
1084                 rt61pci_set_vgc(rt2x00dev, qual, up_bound);
1085                 return;
1086         }
1087
1088         /*
1089          * Special big-R17 for middle-short distance
1090          */
1091         if (qual->rssi >= -66) {
1092                 rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x10);
1093                 return;
1094         }
1095
1096         /*
1097          * Special mid-R17 for middle distance
1098          */
1099         if (qual->rssi >= -74) {
1100                 rt61pci_set_vgc(rt2x00dev, qual, low_bound + 0x08);
1101                 return;
1102         }
1103
1104         /*
1105          * Special case: Change up_bound based on the rssi.
1106          * Lower up_bound when rssi is weaker then -74 dBm.
1107          */
1108         up_bound -= 2 * (-74 - qual->rssi);
1109         if (low_bound > up_bound)
1110                 up_bound = low_bound;
1111
1112         if (qual->vgc_level > up_bound) {
1113                 rt61pci_set_vgc(rt2x00dev, qual, up_bound);
1114                 return;
1115         }
1116
1117 dynamic_cca_tune:
1118
1119         /*
1120          * r17 does not yet exceed upper limit, continue and base
1121          * the r17 tuning on the false CCA count.
1122          */
1123         if ((qual->false_cca > 512) && (qual->vgc_level < up_bound))
1124                 rt61pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level);
1125         else if ((qual->false_cca < 100) && (qual->vgc_level > low_bound))
1126                 rt61pci_set_vgc(rt2x00dev, qual, --qual->vgc_level);
1127 }
1128
1129 /*
1130  * Firmware functions
1131  */
1132 static char *rt61pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
1133 {
1134         u16 chip;
1135         char *fw_name;
1136
1137         pci_read_config_word(to_pci_dev(rt2x00dev->dev), PCI_DEVICE_ID, &chip);
1138         switch (chip) {
1139         case RT2561_PCI_ID:
1140                 fw_name = FIRMWARE_RT2561;
1141                 break;
1142         case RT2561s_PCI_ID:
1143                 fw_name = FIRMWARE_RT2561s;
1144                 break;
1145         case RT2661_PCI_ID:
1146                 fw_name = FIRMWARE_RT2661;
1147                 break;
1148         default:
1149                 fw_name = NULL;
1150                 break;
1151         }
1152
1153         return fw_name;
1154 }
1155
1156 static int rt61pci_check_firmware(struct rt2x00_dev *rt2x00dev,
1157                                   const u8 *data, const size_t len)
1158 {
1159         u16 fw_crc;
1160         u16 crc;
1161
1162         /*
1163          * Only support 8kb firmware files.
1164          */
1165         if (len != 8192)
1166                 return FW_BAD_LENGTH;
1167
1168         /*
1169          * The last 2 bytes in the firmware array are the crc checksum itself.
1170          * This means that we should never pass those 2 bytes to the crc
1171          * algorithm.
1172          */
1173         fw_crc = (data[len - 2] << 8 | data[len - 1]);
1174
1175         /*
1176          * Use the crc itu-t algorithm.
1177          */
1178         crc = crc_itu_t(0, data, len - 2);
1179         crc = crc_itu_t_byte(crc, 0);
1180         crc = crc_itu_t_byte(crc, 0);
1181
1182         return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
1183 }
1184
1185 static int rt61pci_load_firmware(struct rt2x00_dev *rt2x00dev,
1186                                  const u8 *data, const size_t len)
1187 {
1188         int i;
1189         u32 reg;
1190
1191         /*
1192          * Wait for stable hardware.
1193          */
1194         for (i = 0; i < 100; i++) {
1195                 rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
1196                 if (reg)
1197                         break;
1198                 msleep(1);
1199         }
1200
1201         if (!reg) {
1202                 ERROR(rt2x00dev, "Unstable hardware.\n");
1203                 return -EBUSY;
1204         }
1205
1206         /*
1207          * Prepare MCU and mailbox for firmware loading.
1208          */
1209         reg = 0;
1210         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
1211         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1212         rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
1213         rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
1214         rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, 0);
1215
1216         /*
1217          * Write firmware to device.
1218          */
1219         reg = 0;
1220         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 1);
1221         rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 1);
1222         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1223
1224         rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
1225                                       data, len);
1226
1227         rt2x00_set_field32(&reg, MCU_CNTL_CSR_SELECT_BANK, 0);
1228         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1229
1230         rt2x00_set_field32(&reg, MCU_CNTL_CSR_RESET, 0);
1231         rt2x00pci_register_write(rt2x00dev, MCU_CNTL_CSR, reg);
1232
1233         for (i = 0; i < 100; i++) {
1234                 rt2x00pci_register_read(rt2x00dev, MCU_CNTL_CSR, &reg);
1235                 if (rt2x00_get_field32(reg, MCU_CNTL_CSR_READY))
1236                         break;
1237                 msleep(1);
1238         }
1239
1240         if (i == 100) {
1241                 ERROR(rt2x00dev, "MCU Control register not ready.\n");
1242                 return -EBUSY;
1243         }
1244
1245         /*
1246          * Hardware needs another millisecond before it is ready.
1247          */
1248         msleep(1);
1249
1250         /*
1251          * Reset MAC and BBP registers.
1252          */
1253         reg = 0;
1254         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1255         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1256         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1257
1258         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1259         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1260         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1261         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1262
1263         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1264         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1265         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1266
1267         return 0;
1268 }
1269
1270 /*
1271  * Initialization functions.
1272  */
1273 static bool rt61pci_get_entry_state(struct queue_entry *entry)
1274 {
1275         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1276         u32 word;
1277
1278         if (entry->queue->qid == QID_RX) {
1279                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1280
1281                 return rt2x00_get_field32(word, RXD_W0_OWNER_NIC);
1282         } else {
1283                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1284
1285                 return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1286                         rt2x00_get_field32(word, TXD_W0_VALID));
1287         }
1288 }
1289
1290 static void rt61pci_clear_entry(struct queue_entry *entry)
1291 {
1292         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1293         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1294         u32 word;
1295
1296         if (entry->queue->qid == QID_RX) {
1297                 rt2x00_desc_read(entry_priv->desc, 5, &word);
1298                 rt2x00_set_field32(&word, RXD_W5_BUFFER_PHYSICAL_ADDRESS,
1299                                    skbdesc->skb_dma);
1300                 rt2x00_desc_write(entry_priv->desc, 5, word);
1301
1302                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1303                 rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
1304                 rt2x00_desc_write(entry_priv->desc, 0, word);
1305         } else {
1306                 rt2x00_desc_read(entry_priv->desc, 0, &word);
1307                 rt2x00_set_field32(&word, TXD_W0_VALID, 0);
1308                 rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
1309                 rt2x00_desc_write(entry_priv->desc, 0, word);
1310         }
1311 }
1312
1313 static int rt61pci_init_queues(struct rt2x00_dev *rt2x00dev)
1314 {
1315         struct queue_entry_priv_pci *entry_priv;
1316         u32 reg;
1317
1318         /*
1319          * Initialize registers.
1320          */
1321         rt2x00pci_register_read(rt2x00dev, TX_RING_CSR0, &reg);
1322         rt2x00_set_field32(&reg, TX_RING_CSR0_AC0_RING_SIZE,
1323                            rt2x00dev->tx[0].limit);
1324         rt2x00_set_field32(&reg, TX_RING_CSR0_AC1_RING_SIZE,
1325                            rt2x00dev->tx[1].limit);
1326         rt2x00_set_field32(&reg, TX_RING_CSR0_AC2_RING_SIZE,
1327                            rt2x00dev->tx[2].limit);
1328         rt2x00_set_field32(&reg, TX_RING_CSR0_AC3_RING_SIZE,
1329                            rt2x00dev->tx[3].limit);
1330         rt2x00pci_register_write(rt2x00dev, TX_RING_CSR0, reg);
1331
1332         rt2x00pci_register_read(rt2x00dev, TX_RING_CSR1, &reg);
1333         rt2x00_set_field32(&reg, TX_RING_CSR1_TXD_SIZE,
1334                            rt2x00dev->tx[0].desc_size / 4);
1335         rt2x00pci_register_write(rt2x00dev, TX_RING_CSR1, reg);
1336
1337         entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
1338         rt2x00pci_register_read(rt2x00dev, AC0_BASE_CSR, &reg);
1339         rt2x00_set_field32(&reg, AC0_BASE_CSR_RING_REGISTER,
1340                            entry_priv->desc_dma);
1341         rt2x00pci_register_write(rt2x00dev, AC0_BASE_CSR, reg);
1342
1343         entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
1344         rt2x00pci_register_read(rt2x00dev, AC1_BASE_CSR, &reg);
1345         rt2x00_set_field32(&reg, AC1_BASE_CSR_RING_REGISTER,
1346                            entry_priv->desc_dma);
1347         rt2x00pci_register_write(rt2x00dev, AC1_BASE_CSR, reg);
1348
1349         entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
1350         rt2x00pci_register_read(rt2x00dev, AC2_BASE_CSR, &reg);
1351         rt2x00_set_field32(&reg, AC2_BASE_CSR_RING_REGISTER,
1352                            entry_priv->desc_dma);
1353         rt2x00pci_register_write(rt2x00dev, AC2_BASE_CSR, reg);
1354
1355         entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
1356         rt2x00pci_register_read(rt2x00dev, AC3_BASE_CSR, &reg);
1357         rt2x00_set_field32(&reg, AC3_BASE_CSR_RING_REGISTER,
1358                            entry_priv->desc_dma);
1359         rt2x00pci_register_write(rt2x00dev, AC3_BASE_CSR, reg);
1360
1361         rt2x00pci_register_read(rt2x00dev, RX_RING_CSR, &reg);
1362         rt2x00_set_field32(&reg, RX_RING_CSR_RING_SIZE, rt2x00dev->rx->limit);
1363         rt2x00_set_field32(&reg, RX_RING_CSR_RXD_SIZE,
1364                            rt2x00dev->rx->desc_size / 4);
1365         rt2x00_set_field32(&reg, RX_RING_CSR_RXD_WRITEBACK_SIZE, 4);
1366         rt2x00pci_register_write(rt2x00dev, RX_RING_CSR, reg);
1367
1368         entry_priv = rt2x00dev->rx->entries[0].priv_data;
1369         rt2x00pci_register_read(rt2x00dev, RX_BASE_CSR, &reg);
1370         rt2x00_set_field32(&reg, RX_BASE_CSR_RING_REGISTER,
1371                            entry_priv->desc_dma);
1372         rt2x00pci_register_write(rt2x00dev, RX_BASE_CSR, reg);
1373
1374         rt2x00pci_register_read(rt2x00dev, TX_DMA_DST_CSR, &reg);
1375         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC0, 2);
1376         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC1, 2);
1377         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC2, 2);
1378         rt2x00_set_field32(&reg, TX_DMA_DST_CSR_DEST_AC3, 2);
1379         rt2x00pci_register_write(rt2x00dev, TX_DMA_DST_CSR, reg);
1380
1381         rt2x00pci_register_read(rt2x00dev, LOAD_TX_RING_CSR, &reg);
1382         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC0, 1);
1383         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC1, 1);
1384         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC2, 1);
1385         rt2x00_set_field32(&reg, LOAD_TX_RING_CSR_LOAD_TXD_AC3, 1);
1386         rt2x00pci_register_write(rt2x00dev, LOAD_TX_RING_CSR, reg);
1387
1388         rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1389         rt2x00_set_field32(&reg, RX_CNTL_CSR_LOAD_RXD, 1);
1390         rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1391
1392         return 0;
1393 }
1394
1395 static int rt61pci_init_registers(struct rt2x00_dev *rt2x00dev)
1396 {
1397         u32 reg;
1398
1399         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1400         rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
1401         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
1402         rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
1403         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1404
1405         rt2x00pci_register_read(rt2x00dev, TXRX_CSR1, &reg);
1406         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
1407         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
1408         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
1409         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
1410         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
1411         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
1412         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
1413         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
1414         rt2x00pci_register_write(rt2x00dev, TXRX_CSR1, reg);
1415
1416         /*
1417          * CCK TXD BBP registers
1418          */
1419         rt2x00pci_register_read(rt2x00dev, TXRX_CSR2, &reg);
1420         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
1421         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
1422         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
1423         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
1424         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
1425         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
1426         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
1427         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
1428         rt2x00pci_register_write(rt2x00dev, TXRX_CSR2, reg);
1429
1430         /*
1431          * OFDM TXD BBP registers
1432          */
1433         rt2x00pci_register_read(rt2x00dev, TXRX_CSR3, &reg);
1434         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
1435         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
1436         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
1437         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
1438         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
1439         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
1440         rt2x00pci_register_write(rt2x00dev, TXRX_CSR3, reg);
1441
1442         rt2x00pci_register_read(rt2x00dev, TXRX_CSR7, &reg);
1443         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
1444         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
1445         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
1446         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1447         rt2x00pci_register_write(rt2x00dev, TXRX_CSR7, reg);
1448
1449         rt2x00pci_register_read(rt2x00dev, TXRX_CSR8, &reg);
1450         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1451         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1452         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1453         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1454         rt2x00pci_register_write(rt2x00dev, TXRX_CSR8, reg);
1455
1456         rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1457         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
1458         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1459         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
1460         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1461         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1462         rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
1463         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1464
1465         rt2x00pci_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1466
1467         rt2x00pci_register_write(rt2x00dev, MAC_CSR6, 0x00000fff);
1468
1469         rt2x00pci_register_read(rt2x00dev, MAC_CSR9, &reg);
1470         rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1471         rt2x00pci_register_write(rt2x00dev, MAC_CSR9, reg);
1472
1473         rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x0000071c);
1474
1475         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1476                 return -EBUSY;
1477
1478         rt2x00pci_register_write(rt2x00dev, MAC_CSR13, 0x0000e000);
1479
1480         /*
1481          * Invalidate all Shared Keys (SEC_CSR0),
1482          * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1483          */
1484         rt2x00pci_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1485         rt2x00pci_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1486         rt2x00pci_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1487
1488         rt2x00pci_register_write(rt2x00dev, PHY_CSR1, 0x000023b0);
1489         rt2x00pci_register_write(rt2x00dev, PHY_CSR5, 0x060a100c);
1490         rt2x00pci_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1491         rt2x00pci_register_write(rt2x00dev, PHY_CSR7, 0x00000a08);
1492
1493         rt2x00pci_register_write(rt2x00dev, PCI_CFG_CSR, 0x28ca4404);
1494
1495         rt2x00pci_register_write(rt2x00dev, TEST_MODE_CSR, 0x00000200);
1496
1497         rt2x00pci_register_write(rt2x00dev, M2H_CMD_DONE_CSR, 0xffffffff);
1498
1499         /*
1500          * Clear all beacons
1501          * For the Beacon base registers we only need to clear
1502          * the first byte since that byte contains the VALID and OWNER
1503          * bits which (when set to 0) will invalidate the entire beacon.
1504          */
1505         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
1506         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
1507         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
1508         rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
1509
1510         /*
1511          * We must clear the error counters.
1512          * These registers are cleared on read,
1513          * so we may pass a useless variable to store the value.
1514          */
1515         rt2x00pci_register_read(rt2x00dev, STA_CSR0, &reg);
1516         rt2x00pci_register_read(rt2x00dev, STA_CSR1, &reg);
1517         rt2x00pci_register_read(rt2x00dev, STA_CSR2, &reg);
1518
1519         /*
1520          * Reset MAC and BBP registers.
1521          */
1522         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1523         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1524         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1525         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1526
1527         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1528         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1529         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1530         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1531
1532         rt2x00pci_register_read(rt2x00dev, MAC_CSR1, &reg);
1533         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1534         rt2x00pci_register_write(rt2x00dev, MAC_CSR1, reg);
1535
1536         return 0;
1537 }
1538
1539 static int rt61pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
1540 {
1541         unsigned int i;
1542         u8 value;
1543
1544         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1545                 rt61pci_bbp_read(rt2x00dev, 0, &value);
1546                 if ((value != 0xff) && (value != 0x00))
1547                         return 0;
1548                 udelay(REGISTER_BUSY_DELAY);
1549         }
1550
1551         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1552         return -EACCES;
1553 }
1554
1555 static int rt61pci_init_bbp(struct rt2x00_dev *rt2x00dev)
1556 {
1557         unsigned int i;
1558         u16 eeprom;
1559         u8 reg_id;
1560         u8 value;
1561
1562         if (unlikely(rt61pci_wait_bbp_ready(rt2x00dev)))
1563                 return -EACCES;
1564
1565         rt61pci_bbp_write(rt2x00dev, 3, 0x00);
1566         rt61pci_bbp_write(rt2x00dev, 15, 0x30);
1567         rt61pci_bbp_write(rt2x00dev, 21, 0xc8);
1568         rt61pci_bbp_write(rt2x00dev, 22, 0x38);
1569         rt61pci_bbp_write(rt2x00dev, 23, 0x06);
1570         rt61pci_bbp_write(rt2x00dev, 24, 0xfe);
1571         rt61pci_bbp_write(rt2x00dev, 25, 0x0a);
1572         rt61pci_bbp_write(rt2x00dev, 26, 0x0d);
1573         rt61pci_bbp_write(rt2x00dev, 34, 0x12);
1574         rt61pci_bbp_write(rt2x00dev, 37, 0x07);
1575         rt61pci_bbp_write(rt2x00dev, 39, 0xf8);
1576         rt61pci_bbp_write(rt2x00dev, 41, 0x60);
1577         rt61pci_bbp_write(rt2x00dev, 53, 0x10);
1578         rt61pci_bbp_write(rt2x00dev, 54, 0x18);
1579         rt61pci_bbp_write(rt2x00dev, 60, 0x10);
1580         rt61pci_bbp_write(rt2x00dev, 61, 0x04);
1581         rt61pci_bbp_write(rt2x00dev, 62, 0x04);
1582         rt61pci_bbp_write(rt2x00dev, 75, 0xfe);
1583         rt61pci_bbp_write(rt2x00dev, 86, 0xfe);
1584         rt61pci_bbp_write(rt2x00dev, 88, 0xfe);
1585         rt61pci_bbp_write(rt2x00dev, 90, 0x0f);
1586         rt61pci_bbp_write(rt2x00dev, 99, 0x00);
1587         rt61pci_bbp_write(rt2x00dev, 102, 0x16);
1588         rt61pci_bbp_write(rt2x00dev, 107, 0x04);
1589
1590         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1591                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1592
1593                 if (eeprom != 0xffff && eeprom != 0x0000) {
1594                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1595                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1596                         rt61pci_bbp_write(rt2x00dev, reg_id, value);
1597                 }
1598         }
1599
1600         return 0;
1601 }
1602
1603 /*
1604  * Device state switch handlers.
1605  */
1606 static void rt61pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1607                               enum dev_state state)
1608 {
1609         u32 reg;
1610
1611         rt2x00pci_register_read(rt2x00dev, TXRX_CSR0, &reg);
1612         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1613                            (state == STATE_RADIO_RX_OFF) ||
1614                            (state == STATE_RADIO_RX_OFF_LINK));
1615         rt2x00pci_register_write(rt2x00dev, TXRX_CSR0, reg);
1616 }
1617
1618 static void rt61pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1619                                enum dev_state state)
1620 {
1621         int mask = (state == STATE_RADIO_IRQ_OFF);
1622         u32 reg;
1623
1624         /*
1625          * When interrupts are being enabled, the interrupt registers
1626          * should clear the register to assure a clean state.
1627          */
1628         if (state == STATE_RADIO_IRQ_ON) {
1629                 rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
1630                 rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
1631
1632                 rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg);
1633                 rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg);
1634         }
1635
1636         /*
1637          * Only toggle the interrupts bits we are going to use.
1638          * Non-checked interrupt bits are disabled by default.
1639          */
1640         rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
1641         rt2x00_set_field32(&reg, INT_MASK_CSR_TXDONE, mask);
1642         rt2x00_set_field32(&reg, INT_MASK_CSR_RXDONE, mask);
1643         rt2x00_set_field32(&reg, INT_MASK_CSR_ENABLE_MITIGATION, mask);
1644         rt2x00_set_field32(&reg, INT_MASK_CSR_MITIGATION_PERIOD, 0xff);
1645         rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
1646
1647         rt2x00pci_register_read(rt2x00dev, MCU_INT_MASK_CSR, &reg);
1648         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_0, mask);
1649         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_1, mask);
1650         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_2, mask);
1651         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_3, mask);
1652         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_4, mask);
1653         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_5, mask);
1654         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_6, mask);
1655         rt2x00_set_field32(&reg, MCU_INT_MASK_CSR_7, mask);
1656         rt2x00pci_register_write(rt2x00dev, MCU_INT_MASK_CSR, reg);
1657 }
1658
1659 static int rt61pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1660 {
1661         u32 reg;
1662
1663         /*
1664          * Initialize all registers.
1665          */
1666         if (unlikely(rt61pci_init_queues(rt2x00dev) ||
1667                      rt61pci_init_registers(rt2x00dev) ||
1668                      rt61pci_init_bbp(rt2x00dev)))
1669                 return -EIO;
1670
1671         /*
1672          * Enable RX.
1673          */
1674         rt2x00pci_register_read(rt2x00dev, RX_CNTL_CSR, &reg);
1675         rt2x00_set_field32(&reg, RX_CNTL_CSR_ENABLE_RX_DMA, 1);
1676         rt2x00pci_register_write(rt2x00dev, RX_CNTL_CSR, reg);
1677
1678         return 0;
1679 }
1680
1681 static void rt61pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1682 {
1683         /*
1684          * Disable power
1685          */
1686         rt2x00pci_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1687 }
1688
1689 static int rt61pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1690 {
1691         u32 reg;
1692         unsigned int i;
1693         char put_to_sleep;
1694
1695         put_to_sleep = (state != STATE_AWAKE);
1696
1697         rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1698         rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1699         rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1700         rt2x00pci_register_write(rt2x00dev, MAC_CSR12, reg);
1701
1702         /*
1703          * Device is not guaranteed to be in the requested state yet.
1704          * We must wait until the register indicates that the
1705          * device has entered the correct state.
1706          */
1707         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1708                 rt2x00pci_register_read(rt2x00dev, MAC_CSR12, &reg);
1709                 state = rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1710                 if (state == !put_to_sleep)
1711                         return 0;
1712                 msleep(10);
1713         }
1714
1715         return -EBUSY;
1716 }
1717
1718 static int rt61pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1719                                     enum dev_state state)
1720 {
1721         int retval = 0;
1722
1723         switch (state) {
1724         case STATE_RADIO_ON:
1725                 retval = rt61pci_enable_radio(rt2x00dev);
1726                 break;
1727         case STATE_RADIO_OFF:
1728                 rt61pci_disable_radio(rt2x00dev);
1729                 break;
1730         case STATE_RADIO_RX_ON:
1731         case STATE_RADIO_RX_ON_LINK:
1732         case STATE_RADIO_RX_OFF:
1733         case STATE_RADIO_RX_OFF_LINK:
1734                 rt61pci_toggle_rx(rt2x00dev, state);
1735                 break;
1736         case STATE_RADIO_IRQ_ON:
1737         case STATE_RADIO_IRQ_OFF:
1738                 rt61pci_toggle_irq(rt2x00dev, state);
1739                 break;
1740         case STATE_DEEP_SLEEP:
1741         case STATE_SLEEP:
1742         case STATE_STANDBY:
1743         case STATE_AWAKE:
1744                 retval = rt61pci_set_state(rt2x00dev, state);
1745                 break;
1746         default:
1747                 retval = -ENOTSUPP;
1748                 break;
1749         }
1750
1751         if (unlikely(retval))
1752                 ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
1753                       state, retval);
1754
1755         return retval;
1756 }
1757
1758 /*
1759  * TX descriptor initialization
1760  */
1761 static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1762                                   struct sk_buff *skb,
1763                                   struct txentry_desc *txdesc)
1764 {
1765         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1766         __le32 *txd = skbdesc->desc;
1767         u32 word;
1768
1769         /*
1770          * Start writing the descriptor words.
1771          */
1772         rt2x00_desc_read(txd, 1, &word);
1773         rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
1774         rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
1775         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1776         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1777         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
1778         rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE,
1779                            test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
1780         rt2x00_set_field32(&word, TXD_W1_BUFFER_COUNT, 1);
1781         rt2x00_desc_write(txd, 1, word);
1782
1783         rt2x00_desc_read(txd, 2, &word);
1784         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1785         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1786         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1787         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1788         rt2x00_desc_write(txd, 2, word);
1789
1790         if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
1791                 _rt2x00_desc_write(txd, 3, skbdesc->iv[0]);
1792                 _rt2x00_desc_write(txd, 4, skbdesc->iv[1]);
1793         }
1794
1795         rt2x00_desc_read(txd, 5, &word);
1796         rt2x00_set_field32(&word, TXD_W5_PID_TYPE, skbdesc->entry->queue->qid);
1797         rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE,
1798                            skbdesc->entry->entry_idx);
1799         rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1800                            TXPOWER_TO_DEV(rt2x00dev->tx_power));
1801         rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1802         rt2x00_desc_write(txd, 5, word);
1803
1804         rt2x00_desc_read(txd, 6, &word);
1805         rt2x00_set_field32(&word, TXD_W6_BUFFER_PHYSICAL_ADDRESS,
1806                            skbdesc->skb_dma);
1807         rt2x00_desc_write(txd, 6, word);
1808
1809         if (skbdesc->desc_len > TXINFO_SIZE) {
1810                 rt2x00_desc_read(txd, 11, &word);
1811                 rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skb->len);
1812                 rt2x00_desc_write(txd, 11, word);
1813         }
1814
1815         rt2x00_desc_read(txd, 0, &word);
1816         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1817         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1818         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1819                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1820         rt2x00_set_field32(&word, TXD_W0_ACK,
1821                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1822         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1823                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1824         rt2x00_set_field32(&word, TXD_W0_OFDM,
1825                            (txdesc->rate_mode == RATE_MODE_OFDM));
1826         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1827         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1828                            test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
1829         rt2x00_set_field32(&word, TXD_W0_TKIP_MIC,
1830                            test_bit(ENTRY_TXD_ENCRYPT_MMIC, &txdesc->flags));
1831         rt2x00_set_field32(&word, TXD_W0_KEY_TABLE,
1832                            test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags));
1833         rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx);
1834         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
1835         rt2x00_set_field32(&word, TXD_W0_BURST,
1836                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1837         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher);
1838         rt2x00_desc_write(txd, 0, word);
1839 }
1840
1841 /*
1842  * TX data initialization
1843  */
1844 static void rt61pci_write_beacon(struct queue_entry *entry)
1845 {
1846         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1847         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1848         unsigned int beacon_base;
1849         u32 reg;
1850
1851         /*
1852          * Disable beaconing while we are reloading the beacon data,
1853          * otherwise we might be sending out invalid data.
1854          */
1855         rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1856         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1857         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1858
1859         /*
1860          * Write entire beacon with descriptor to register.
1861          */
1862         beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
1863         rt2x00pci_register_multiwrite(rt2x00dev,
1864                                       beacon_base,
1865                                       skbdesc->desc, skbdesc->desc_len);
1866         rt2x00pci_register_multiwrite(rt2x00dev,
1867                                       beacon_base + skbdesc->desc_len,
1868                                       entry->skb->data, entry->skb->len);
1869
1870         /*
1871          * Clean up beacon skb.
1872          */
1873         dev_kfree_skb_any(entry->skb);
1874         entry->skb = NULL;
1875 }
1876
1877 static void rt61pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1878                                   const enum data_queue_qid queue)
1879 {
1880         u32 reg;
1881
1882         if (queue == QID_BEACON) {
1883                 /*
1884                  * For Wi-Fi faily generated beacons between participating
1885                  * stations. Set TBTT phase adaptive adjustment step to 8us.
1886                  */
1887                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1888
1889                 rt2x00pci_register_read(rt2x00dev, TXRX_CSR9, &reg);
1890                 if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1891                         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
1892                         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
1893                         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1894                         rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
1895                 }
1896                 return;
1897         }
1898
1899         rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1900         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC0, (queue == QID_AC_BE));
1901         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC1, (queue == QID_AC_BK));
1902         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC2, (queue == QID_AC_VI));
1903         rt2x00_set_field32(&reg, TX_CNTL_CSR_KICK_TX_AC3, (queue == QID_AC_VO));
1904         rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1905 }
1906
1907 static void rt61pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
1908                                   const enum data_queue_qid qid)
1909 {
1910         u32 reg;
1911
1912         if (qid == QID_BEACON) {
1913                 rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, 0);
1914                 return;
1915         }
1916
1917         rt2x00pci_register_read(rt2x00dev, TX_CNTL_CSR, &reg);
1918         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC0, (qid == QID_AC_BE));
1919         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC1, (qid == QID_AC_BK));
1920         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC2, (qid == QID_AC_VI));
1921         rt2x00_set_field32(&reg, TX_CNTL_CSR_ABORT_TX_AC3, (qid == QID_AC_VO));
1922         rt2x00pci_register_write(rt2x00dev, TX_CNTL_CSR, reg);
1923 }
1924
1925 /*
1926  * RX control handlers
1927  */
1928 static int rt61pci_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1929 {
1930         u8 offset = rt2x00dev->lna_gain;
1931         u8 lna;
1932
1933         lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1934         switch (lna) {
1935         case 3:
1936                 offset += 90;
1937                 break;
1938         case 2:
1939                 offset += 74;
1940                 break;
1941         case 1:
1942                 offset += 64;
1943                 break;
1944         default:
1945                 return 0;
1946         }
1947
1948         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1949                 if (lna == 3 || lna == 2)
1950                         offset += 10;
1951         }
1952
1953         return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1954 }
1955
1956 static void rt61pci_fill_rxdone(struct queue_entry *entry,
1957                                 struct rxdone_entry_desc *rxdesc)
1958 {
1959         struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
1960         struct queue_entry_priv_pci *entry_priv = entry->priv_data;
1961         u32 word0;
1962         u32 word1;
1963
1964         rt2x00_desc_read(entry_priv->desc, 0, &word0);
1965         rt2x00_desc_read(entry_priv->desc, 1, &word1);
1966
1967         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1968                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1969
1970         if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
1971                 rxdesc->cipher =
1972                     rt2x00_get_field32(word0, RXD_W0_CIPHER_ALG);
1973                 rxdesc->cipher_status =
1974                     rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR);
1975         }
1976
1977         if (rxdesc->cipher != CIPHER_NONE) {
1978                 _rt2x00_desc_read(entry_priv->desc, 2, &rxdesc->iv[0]);
1979                 _rt2x00_desc_read(entry_priv->desc, 3, &rxdesc->iv[1]);
1980                 rxdesc->dev_flags |= RXDONE_CRYPTO_IV;
1981
1982                 _rt2x00_desc_read(entry_priv->desc, 4, &rxdesc->icv);
1983                 rxdesc->dev_flags |= RXDONE_CRYPTO_ICV;
1984
1985                 /*
1986                  * Hardware has stripped IV/EIV data from 802.11 frame during
1987                  * decryption. It has provided the data separately but rt2x00lib
1988                  * should decide if it should be reinserted.
1989                  */
1990                 rxdesc->flags |= RX_FLAG_IV_STRIPPED;
1991
1992                 /*
1993                  * FIXME: Legacy driver indicates that the frame does
1994                  * contain the Michael Mic. Unfortunately, in rt2x00
1995                  * the MIC seems to be missing completely...
1996                  */
1997                 rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
1998
1999                 if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
2000                         rxdesc->flags |= RX_FLAG_DECRYPTED;
2001                 else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
2002                         rxdesc->flags |= RX_FLAG_MMIC_ERROR;
2003         }
2004
2005         /*
2006          * Obtain the status about this packet.
2007          * When frame was received with an OFDM bitrate,
2008          * the signal is the PLCP value. If it was received with
2009          * a CCK bitrate the signal is the rate in 100kbit/s.
2010          */
2011         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
2012         rxdesc->rssi = rt61pci_agc_to_rssi(rt2x00dev, word1);
2013         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
2014
2015         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
2016                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
2017         else
2018                 rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
2019         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
2020                 rxdesc->dev_flags |= RXDONE_MY_BSS;
2021 }
2022
2023 /*
2024  * Interrupt functions.
2025  */
2026 static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
2027 {
2028         struct data_queue *queue;
2029         struct queue_entry *entry;
2030         struct queue_entry *entry_done;
2031         struct queue_entry_priv_pci *entry_priv;
2032         struct txdone_entry_desc txdesc;
2033         u32 word;
2034         u32 reg;
2035         u32 old_reg;
2036         int type;
2037         int index;
2038
2039         /*
2040          * During each loop we will compare the freshly read
2041          * STA_CSR4 register value with the value read from
2042          * the previous loop. If the 2 values are equal then
2043          * we should stop processing because the chance is
2044          * quite big that the device has been unplugged and
2045          * we risk going into an endless loop.
2046          */
2047         old_reg = 0;
2048
2049         while (1) {
2050                 rt2x00pci_register_read(rt2x00dev, STA_CSR4, &reg);
2051                 if (!rt2x00_get_field32(reg, STA_CSR4_VALID))
2052                         break;
2053
2054                 if (old_reg == reg)
2055                         break;
2056                 old_reg = reg;
2057
2058                 /*
2059                  * Skip this entry when it contains an invalid
2060                  * queue identication number.
2061                  */
2062                 type = rt2x00_get_field32(reg, STA_CSR4_PID_TYPE);
2063                 queue = rt2x00queue_get_queue(rt2x00dev, type);
2064                 if (unlikely(!queue))
2065                         continue;
2066
2067                 /*
2068                  * Skip this entry when it contains an invalid
2069                  * index number.
2070                  */
2071                 index = rt2x00_get_field32(reg, STA_CSR4_PID_SUBTYPE);
2072                 if (unlikely(index >= queue->limit))
2073                         continue;
2074
2075                 entry = &queue->entries[index];
2076                 entry_priv = entry->priv_data;
2077                 rt2x00_desc_read(entry_priv->desc, 0, &word);
2078
2079                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
2080                     !rt2x00_get_field32(word, TXD_W0_VALID))
2081                         return;
2082
2083                 entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
2084                 while (entry != entry_done) {
2085                         /* Catch up.
2086                          * Just report any entries we missed as failed.
2087                          */
2088                         WARNING(rt2x00dev,
2089                                 "TX status report missed for entry %d\n",
2090                                 entry_done->entry_idx);
2091
2092                         txdesc.flags = 0;
2093                         __set_bit(TXDONE_UNKNOWN, &txdesc.flags);
2094                         txdesc.retry = 0;
2095
2096                         rt2x00lib_txdone(entry_done, &txdesc);
2097                         entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
2098                 }
2099
2100                 /*
2101                  * Obtain the status about this packet.
2102                  */
2103                 txdesc.flags = 0;
2104                 switch (rt2x00_get_field32(reg, STA_CSR4_TX_RESULT)) {
2105                 case 0: /* Success, maybe with retry */
2106                         __set_bit(TXDONE_SUCCESS, &txdesc.flags);
2107                         break;
2108                 case 6: /* Failure, excessive retries */
2109                         __set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
2110                         /* Don't break, this is a failed frame! */
2111                 default: /* Failure */
2112                         __set_bit(TXDONE_FAILURE, &txdesc.flags);
2113                 }
2114                 txdesc.retry = rt2x00_get_field32(reg, STA_CSR4_RETRY_COUNT);
2115
2116                 rt2x00lib_txdone(entry, &txdesc);
2117         }
2118 }
2119
2120 static irqreturn_t rt61pci_interrupt(int irq, void *dev_instance)
2121 {
2122         struct rt2x00_dev *rt2x00dev = dev_instance;
2123         u32 reg_mcu;
2124         u32 reg;
2125
2126         /*
2127          * Get the interrupt sources & saved to local variable.
2128          * Write register value back to clear pending interrupts.
2129          */
2130         rt2x00pci_register_read(rt2x00dev, MCU_INT_SOURCE_CSR, &reg_mcu);
2131         rt2x00pci_register_write(rt2x00dev, MCU_INT_SOURCE_CSR, reg_mcu);
2132
2133         rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
2134         rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
2135
2136         if (!reg && !reg_mcu)
2137                 return IRQ_NONE;
2138
2139         if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
2140                 return IRQ_HANDLED;
2141
2142         /*
2143          * Handle interrupts, walk through all bits
2144          * and run the tasks, the bits are checked in order of
2145          * priority.
2146          */
2147
2148         /*
2149          * 1 - Rx ring done interrupt.
2150          */
2151         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RXDONE))
2152                 rt2x00pci_rxdone(rt2x00dev);
2153
2154         /*
2155          * 2 - Tx ring done interrupt.
2156          */
2157         if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TXDONE))
2158                 rt61pci_txdone(rt2x00dev);
2159
2160         /*
2161          * 3 - Handle MCU command done.
2162          */
2163         if (reg_mcu)
2164                 rt2x00pci_register_write(rt2x00dev,
2165                                          M2H_CMD_DONE_CSR, 0xffffffff);
2166
2167         return IRQ_HANDLED;
2168 }
2169
2170 /*
2171  * Device probe functions.
2172  */
2173 static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
2174 {
2175         struct eeprom_93cx6 eeprom;
2176         u32 reg;
2177         u16 word;
2178         u8 *mac;
2179         s8 value;
2180
2181         rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
2182
2183         eeprom.data = rt2x00dev;
2184         eeprom.register_read = rt61pci_eepromregister_read;
2185         eeprom.register_write = rt61pci_eepromregister_write;
2186         eeprom.width = rt2x00_get_field32(reg, E2PROM_CSR_TYPE_93C46) ?
2187             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
2188         eeprom.reg_data_in = 0;
2189         eeprom.reg_data_out = 0;
2190         eeprom.reg_data_clock = 0;
2191         eeprom.reg_chip_select = 0;
2192
2193         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
2194                                EEPROM_SIZE / sizeof(u16));
2195
2196         /*
2197          * Start validation of the data that has been read.
2198          */
2199         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
2200         if (!is_valid_ether_addr(mac)) {
2201                 random_ether_addr(mac);
2202                 EEPROM(rt2x00dev, "MAC: %pM\n", mac);
2203         }
2204
2205         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
2206         if (word == 0xffff) {
2207                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
2208                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
2209                                    ANTENNA_B);
2210                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
2211                                    ANTENNA_B);
2212                 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
2213                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
2214                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
2215                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5225);
2216                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
2217                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
2218         }
2219
2220         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
2221         if (word == 0xffff) {
2222                 rt2x00_set_field16(&word, EEPROM_NIC_ENABLE_DIVERSITY, 0);
2223                 rt2x00_set_field16(&word, EEPROM_NIC_TX_DIVERSITY, 0);
2224                 rt2x00_set_field16(&word, EEPROM_NIC_RX_FIXED, 0);
2225                 rt2x00_set_field16(&word, EEPROM_NIC_TX_FIXED, 0);
2226                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
2227                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
2228                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
2229                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
2230                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
2231         }
2232
2233         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
2234         if (word == 0xffff) {
2235                 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
2236                                    LED_MODE_DEFAULT);
2237                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
2238                 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
2239         }
2240
2241         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
2242         if (word == 0xffff) {
2243                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
2244                 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
2245                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
2246                 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
2247         }
2248
2249         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
2250         if (word == 0xffff) {
2251                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
2252                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
2253                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
2254                 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
2255         } else {
2256                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
2257                 if (value < -10 || value > 10)
2258                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
2259                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
2260                 if (value < -10 || value > 10)
2261                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
2262                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
2263         }
2264
2265         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
2266         if (word == 0xffff) {
2267                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
2268                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
2269                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
2270                 EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
2271         } else {
2272                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
2273                 if (value < -10 || value > 10)
2274                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
2275                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
2276                 if (value < -10 || value > 10)
2277                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
2278                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
2279         }
2280
2281         return 0;
2282 }
2283
2284 static int rt61pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
2285 {
2286         u32 reg;
2287         u16 value;
2288         u16 eeprom;
2289
2290         /*
2291          * Read EEPROM word for configuration.
2292          */
2293         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
2294
2295         /*
2296          * Identify RF chipset.
2297          */
2298         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
2299         rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
2300         rt2x00_set_chip(rt2x00dev, rt2x00_get_field32(reg, MAC_CSR0_CHIPSET),
2301                         value, rt2x00_get_field32(reg, MAC_CSR0_REVISION));
2302
2303         if (!rt2x00_rf(rt2x00dev, RF5225) &&
2304             !rt2x00_rf(rt2x00dev, RF5325) &&
2305             !rt2x00_rf(rt2x00dev, RF2527) &&
2306             !rt2x00_rf(rt2x00dev, RF2529)) {
2307                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
2308                 return -ENODEV;
2309         }
2310
2311         /*
2312          * Determine number of antennas.
2313          */
2314         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_NUM) == 2)
2315                 __set_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags);
2316
2317         /*
2318          * Identify default antenna configuration.
2319          */
2320         rt2x00dev->default_ant.tx =
2321             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
2322         rt2x00dev->default_ant.rx =
2323             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
2324
2325         /*
2326          * Read the Frame type.
2327          */
2328         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
2329                 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
2330
2331         /*
2332          * Detect if this device has a hardware controlled radio.
2333          */
2334         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
2335                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
2336
2337         /*
2338          * Read frequency offset and RF programming sequence.
2339          */
2340         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
2341         if (rt2x00_get_field16(eeprom, EEPROM_FREQ_SEQ))
2342                 __set_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags);
2343
2344         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
2345
2346         /*
2347          * Read external LNA informations.
2348          */
2349         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
2350
2351         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
2352                 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
2353         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
2354                 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
2355
2356         /*
2357          * When working with a RF2529 chip without double antenna,
2358          * the antenna settings should be gathered from the NIC
2359          * eeprom word.
2360          */
2361         if (rt2x00_rf(rt2x00dev, RF2529) &&
2362             !test_bit(CONFIG_DOUBLE_ANTENNA, &rt2x00dev->flags)) {
2363                 rt2x00dev->default_ant.rx =
2364                     ANTENNA_A + rt2x00_get_field16(eeprom, EEPROM_NIC_RX_FIXED);
2365                 rt2x00dev->default_ant.tx =
2366                     ANTENNA_B - rt2x00_get_field16(eeprom, EEPROM_NIC_TX_FIXED);
2367
2368                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_TX_DIVERSITY))
2369                         rt2x00dev->default_ant.tx = ANTENNA_SW_DIVERSITY;
2370                 if (rt2x00_get_field16(eeprom, EEPROM_NIC_ENABLE_DIVERSITY))
2371                         rt2x00dev->default_ant.rx = ANTENNA_SW_DIVERSITY;
2372         }
2373
2374         /*
2375          * Store led settings, for correct led behaviour.
2376          * If the eeprom value is invalid,
2377          * switch to default led mode.
2378          */
2379 #ifdef CONFIG_RT2X00_LIB_LEDS
2380         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
2381         value = rt2x00_get_field16(eeprom, EEPROM_LED_LED_MODE);
2382
2383         rt61pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
2384         rt61pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
2385         if (value == LED_MODE_SIGNAL_STRENGTH)
2386                 rt61pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
2387                                  LED_TYPE_QUALITY);
2388
2389         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
2390         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
2391                            rt2x00_get_field16(eeprom,
2392                                               EEPROM_LED_POLARITY_GPIO_0));
2393         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
2394                            rt2x00_get_field16(eeprom,
2395                                               EEPROM_LED_POLARITY_GPIO_1));
2396         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
2397                            rt2x00_get_field16(eeprom,
2398                                               EEPROM_LED_POLARITY_GPIO_2));
2399         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
2400                            rt2x00_get_field16(eeprom,
2401                                               EEPROM_LED_POLARITY_GPIO_3));
2402         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
2403                            rt2x00_get_field16(eeprom,
2404                                               EEPROM_LED_POLARITY_GPIO_4));
2405         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
2406                            rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
2407         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
2408                            rt2x00_get_field16(eeprom,
2409                                               EEPROM_LED_POLARITY_RDY_G));
2410         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
2411                            rt2x00_get_field16(eeprom,
2412                                               EEPROM_LED_POLARITY_RDY_A));
2413 #endif /* CONFIG_RT2X00_LIB_LEDS */
2414
2415         return 0;
2416 }
2417
2418 /*
2419  * RF value list for RF5225 & RF5325
2420  * Supports: 2.4 GHz & 5.2 GHz, rf_sequence disabled
2421  */
2422 static const struct rf_channel rf_vals_noseq[] = {
2423         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2424         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2425         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2426         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2427         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2428         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2429         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2430         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2431         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2432         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2433         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2434         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2435         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2436         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2437
2438         /* 802.11 UNI / HyperLan 2 */
2439         { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
2440         { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
2441         { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
2442         { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
2443         { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
2444         { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
2445         { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
2446         { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
2447
2448         /* 802.11 HyperLan 2 */
2449         { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
2450         { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
2451         { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
2452         { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
2453         { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
2454         { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
2455         { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
2456         { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
2457         { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
2458         { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
2459
2460         /* 802.11 UNII */
2461         { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
2462         { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
2463         { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
2464         { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
2465         { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
2466         { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
2467
2468         /* MMAC(Japan)J52 ch 34,38,42,46 */
2469         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
2470         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
2471         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
2472         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
2473 };
2474
2475 /*
2476  * RF value list for RF5225 & RF5325
2477  * Supports: 2.4 GHz & 5.2 GHz, rf_sequence enabled
2478  */
2479 static const struct rf_channel rf_vals_seq[] = {
2480         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
2481         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
2482         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
2483         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
2484         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
2485         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
2486         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
2487         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
2488         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
2489         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
2490         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
2491         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
2492         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
2493         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
2494
2495         /* 802.11 UNI / HyperLan 2 */
2496         { 36, 0x00002cd4, 0x0004481a, 0x00098455, 0x000c0a03 },
2497         { 40, 0x00002cd0, 0x00044682, 0x00098455, 0x000c0a03 },
2498         { 44, 0x00002cd0, 0x00044686, 0x00098455, 0x000c0a1b },
2499         { 48, 0x00002cd0, 0x0004468e, 0x00098655, 0x000c0a0b },
2500         { 52, 0x00002cd0, 0x00044692, 0x00098855, 0x000c0a23 },
2501         { 56, 0x00002cd0, 0x0004469a, 0x00098c55, 0x000c0a13 },
2502         { 60, 0x00002cd0, 0x000446a2, 0x00098e55, 0x000c0a03 },
2503         { 64, 0x00002cd0, 0x000446a6, 0x00099255, 0x000c0a1b },
2504
2505         /* 802.11 HyperLan 2 */
2506         { 100, 0x00002cd4, 0x0004489a, 0x000b9855, 0x000c0a03 },
2507         { 104, 0x00002cd4, 0x000448a2, 0x000b9855, 0x000c0a03 },
2508         { 108, 0x00002cd4, 0x000448aa, 0x000b9855, 0x000c0a03 },
2509         { 112, 0x00002cd4, 0x000448b2, 0x000b9a55, 0x000c0a03 },
2510         { 116, 0x00002cd4, 0x000448ba, 0x000b9a55, 0x000c0a03 },
2511         { 120, 0x00002cd0, 0x00044702, 0x000b9a55, 0x000c0a03 },
2512         { 124, 0x00002cd0, 0x00044706, 0x000b9a55, 0x000c0a1b },
2513         { 128, 0x00002cd0, 0x0004470e, 0x000b9c55, 0x000c0a0b },
2514         { 132, 0x00002cd0, 0x00044712, 0x000b9c55, 0x000c0a23 },
2515         { 136, 0x00002cd0, 0x0004471a, 0x000b9e55, 0x000c0a13 },
2516
2517         /* 802.11 UNII */
2518         { 140, 0x00002cd0, 0x00044722, 0x000b9e55, 0x000c0a03 },
2519         { 149, 0x00002cd0, 0x0004472e, 0x000ba255, 0x000c0a1b },
2520         { 153, 0x00002cd0, 0x00044736, 0x000ba255, 0x000c0a0b },
2521         { 157, 0x00002cd4, 0x0004490a, 0x000ba255, 0x000c0a17 },
2522         { 161, 0x00002cd4, 0x00044912, 0x000ba255, 0x000c0a17 },
2523         { 165, 0x00002cd4, 0x0004491a, 0x000ba255, 0x000c0a17 },
2524
2525         /* MMAC(Japan)J52 ch 34,38,42,46 */
2526         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000c0a0b },
2527         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000c0a13 },
2528         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000c0a1b },
2529         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
2530 };
2531
2532 static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
2533 {
2534         struct hw_mode_spec *spec = &rt2x00dev->spec;
2535         struct channel_info *info;
2536         char *tx_power;
2537         unsigned int i;
2538
2539         /*
2540          * Disable powersaving as default.
2541          */
2542         rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
2543
2544         /*
2545          * Initialize all hw fields.
2546          */
2547         rt2x00dev->hw->flags =
2548             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
2549             IEEE80211_HW_SIGNAL_DBM |
2550             IEEE80211_HW_SUPPORTS_PS |
2551             IEEE80211_HW_PS_NULLFUNC_STACK;
2552
2553         SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
2554         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
2555                                 rt2x00_eeprom_addr(rt2x00dev,
2556                                                    EEPROM_MAC_ADDR_0));
2557
2558         /*
2559          * Initialize hw_mode information.
2560          */
2561         spec->supported_bands = SUPPORT_BAND_2GHZ;
2562         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
2563
2564         if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
2565                 spec->num_channels = 14;
2566                 spec->channels = rf_vals_noseq;
2567         } else {
2568                 spec->num_channels = 14;
2569                 spec->channels = rf_vals_seq;
2570         }
2571
2572         if (rt2x00_rf(rt2x00dev, RF5225) || rt2x00_rf(rt2x00dev, RF5325)) {
2573                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
2574                 spec->num_channels = ARRAY_SIZE(rf_vals_seq);
2575         }
2576
2577         /*
2578          * Create channel information array
2579          */
2580         info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
2581         if (!info)
2582                 return -ENOMEM;
2583
2584         spec->channels_info = info;
2585
2586         tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
2587         for (i = 0; i < 14; i++)
2588                 info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2589
2590         if (spec->num_channels > 14) {
2591                 tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
2592                 for (i = 14; i < spec->num_channels; i++)
2593                         info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
2594         }
2595
2596         return 0;
2597 }
2598
2599 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
2600 {
2601         int retval;
2602
2603         /*
2604          * Disable power saving.
2605          */
2606         rt2x00pci_register_write(rt2x00dev, SOFT_RESET_CSR, 0x00000007);
2607
2608         /*
2609          * Allocate eeprom data.
2610          */
2611         retval = rt61pci_validate_eeprom(rt2x00dev);
2612         if (retval)
2613                 return retval;
2614
2615         retval = rt61pci_init_eeprom(rt2x00dev);
2616         if (retval)
2617                 return retval;
2618
2619         /*
2620          * Initialize hw specifications.
2621          */
2622         retval = rt61pci_probe_hw_mode(rt2x00dev);
2623         if (retval)
2624                 return retval;
2625
2626         /*
2627          * This device has multiple filters for control frames,
2628          * but has no a separate filter for PS Poll frames.
2629          */
2630         __set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
2631
2632         /*
2633          * This device requires firmware and DMA mapped skbs.
2634          */
2635         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
2636         __set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
2637         if (!modparam_nohwcrypt)
2638                 __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
2639
2640         /*
2641          * Set the rssi offset.
2642          */
2643         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
2644
2645         return 0;
2646 }
2647
2648 /*
2649  * IEEE80211 stack callback functions.
2650  */
2651 static int rt61pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
2652                            const struct ieee80211_tx_queue_params *params)
2653 {
2654         struct rt2x00_dev *rt2x00dev = hw->priv;
2655         struct data_queue *queue;
2656         struct rt2x00_field32 field;
2657         int retval;
2658         u32 reg;
2659         u32 offset;
2660
2661         /*
2662          * First pass the configuration through rt2x00lib, that will
2663          * update the queue settings and validate the input. After that
2664          * we are free to update the registers based on the value
2665          * in the queue parameter.
2666          */
2667         retval = rt2x00mac_conf_tx(hw, queue_idx, params);
2668         if (retval)
2669                 return retval;
2670
2671         /*
2672          * We only need to perform additional register initialization
2673          * for WMM queues.
2674          */
2675         if (queue_idx >= 4)
2676                 return 0;
2677
2678         queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
2679
2680         /* Update WMM TXOP register */
2681         offset = AC_TXOP_CSR0 + (sizeof(u32) * (!!(queue_idx & 2)));
2682         field.bit_offset = (queue_idx & 1) * 16;
2683         field.bit_mask = 0xffff << field.bit_offset;
2684
2685         rt2x00pci_register_read(rt2x00dev, offset, &reg);
2686         rt2x00_set_field32(&reg, field, queue->txop);
2687         rt2x00pci_register_write(rt2x00dev, offset, reg);
2688
2689         /* Update WMM registers */
2690         field.bit_offset = queue_idx * 4;
2691         field.bit_mask = 0xf << field.bit_offset;
2692
2693         rt2x00pci_register_read(rt2x00dev, AIFSN_CSR, &reg);
2694         rt2x00_set_field32(&reg, field, queue->aifs);
2695         rt2x00pci_register_write(rt2x00dev, AIFSN_CSR, reg);
2696
2697         rt2x00pci_register_read(rt2x00dev, CWMIN_CSR, &reg);
2698         rt2x00_set_field32(&reg, field, queue->cw_min);
2699         rt2x00pci_register_write(rt2x00dev, CWMIN_CSR, reg);
2700
2701         rt2x00pci_register_read(rt2x00dev, CWMAX_CSR, &reg);
2702         rt2x00_set_field32(&reg, field, queue->cw_max);
2703         rt2x00pci_register_write(rt2x00dev, CWMAX_CSR, reg);
2704
2705         return 0;
2706 }
2707
2708 static u64 rt61pci_get_tsf(struct ieee80211_hw *hw)
2709 {
2710         struct rt2x00_dev *rt2x00dev = hw->priv;
2711         u64 tsf;
2712         u32 reg;
2713
2714         rt2x00pci_register_read(rt2x00dev, TXRX_CSR13, &reg);
2715         tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
2716         rt2x00pci_register_read(rt2x00dev, TXRX_CSR12, &reg);
2717         tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
2718
2719         return tsf;
2720 }
2721
2722 static const struct ieee80211_ops rt61pci_mac80211_ops = {
2723         .tx                     = rt2x00mac_tx,
2724         .start                  = rt2x00mac_start,
2725         .stop                   = rt2x00mac_stop,
2726         .add_interface          = rt2x00mac_add_interface,
2727         .remove_interface       = rt2x00mac_remove_interface,
2728         .config                 = rt2x00mac_config,
2729         .configure_filter       = rt2x00mac_configure_filter,
2730         .set_tim                = rt2x00mac_set_tim,
2731         .set_key                = rt2x00mac_set_key,
2732         .get_stats              = rt2x00mac_get_stats,
2733         .bss_info_changed       = rt2x00mac_bss_info_changed,
2734         .conf_tx                = rt61pci_conf_tx,
2735         .get_tsf                = rt61pci_get_tsf,
2736         .rfkill_poll            = rt2x00mac_rfkill_poll,
2737 };
2738
2739 static const struct rt2x00lib_ops rt61pci_rt2x00_ops = {
2740         .irq_handler            = rt61pci_interrupt,
2741         .probe_hw               = rt61pci_probe_hw,
2742         .get_firmware_name      = rt61pci_get_firmware_name,
2743         .check_firmware         = rt61pci_check_firmware,
2744         .load_firmware          = rt61pci_load_firmware,
2745         .initialize             = rt2x00pci_initialize,
2746         .uninitialize           = rt2x00pci_uninitialize,
2747         .get_entry_state        = rt61pci_get_entry_state,
2748         .clear_entry            = rt61pci_clear_entry,
2749         .set_device_state       = rt61pci_set_device_state,
2750         .rfkill_poll            = rt61pci_rfkill_poll,
2751         .link_stats             = rt61pci_link_stats,
2752         .reset_tuner            = rt61pci_reset_tuner,
2753         .link_tuner             = rt61pci_link_tuner,
2754         .write_tx_desc          = rt61pci_write_tx_desc,
2755         .write_tx_data          = rt2x00pci_write_tx_data,
2756         .write_beacon           = rt61pci_write_beacon,
2757         .kick_tx_queue          = rt61pci_kick_tx_queue,
2758         .kill_tx_queue          = rt61pci_kill_tx_queue,
2759         .fill_rxdone            = rt61pci_fill_rxdone,
2760         .config_shared_key      = rt61pci_config_shared_key,
2761         .config_pairwise_key    = rt61pci_config_pairwise_key,
2762         .config_filter          = rt61pci_config_filter,
2763         .config_intf            = rt61pci_config_intf,
2764         .config_erp             = rt61pci_config_erp,
2765         .config_ant             = rt61pci_config_ant,
2766         .config                 = rt61pci_config,
2767 };
2768
2769 static const struct data_queue_desc rt61pci_queue_rx = {
2770         .entry_num              = RX_ENTRIES,
2771         .data_size              = DATA_FRAME_SIZE,
2772         .desc_size              = RXD_DESC_SIZE,
2773         .priv_size              = sizeof(struct queue_entry_priv_pci),
2774 };
2775
2776 static const struct data_queue_desc rt61pci_queue_tx = {
2777         .entry_num              = TX_ENTRIES,
2778         .data_size              = DATA_FRAME_SIZE,
2779         .desc_size              = TXD_DESC_SIZE,
2780         .priv_size              = sizeof(struct queue_entry_priv_pci),
2781 };
2782
2783 static const struct data_queue_desc rt61pci_queue_bcn = {
2784         .entry_num              = 4 * BEACON_ENTRIES,
2785         .data_size              = 0, /* No DMA required for beacons */
2786         .desc_size              = TXINFO_SIZE,
2787         .priv_size              = sizeof(struct queue_entry_priv_pci),
2788 };
2789
2790 static const struct rt2x00_ops rt61pci_ops = {
2791         .name                   = KBUILD_MODNAME,
2792         .max_sta_intf           = 1,
2793         .max_ap_intf            = 4,
2794         .eeprom_size            = EEPROM_SIZE,
2795         .rf_size                = RF_SIZE,
2796         .tx_queues              = NUM_TX_QUEUES,
2797         .extra_tx_headroom      = 0,
2798         .rx                     = &rt61pci_queue_rx,
2799         .tx                     = &rt61pci_queue_tx,
2800         .bcn                    = &rt61pci_queue_bcn,
2801         .lib                    = &rt61pci_rt2x00_ops,
2802         .hw                     = &rt61pci_mac80211_ops,
2803 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2804         .debugfs                = &rt61pci_rt2x00debug,
2805 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2806 };
2807
2808 /*
2809  * RT61pci module information.
2810  */
2811 static DEFINE_PCI_DEVICE_TABLE(rt61pci_device_table) = {
2812         /* RT2561s */
2813         { PCI_DEVICE(0x1814, 0x0301), PCI_DEVICE_DATA(&rt61pci_ops) },
2814         /* RT2561 v2 */
2815         { PCI_DEVICE(0x1814, 0x0302), PCI_DEVICE_DATA(&rt61pci_ops) },
2816         /* RT2661 */
2817         { PCI_DEVICE(0x1814, 0x0401), PCI_DEVICE_DATA(&rt61pci_ops) },
2818         { 0, }
2819 };
2820
2821 MODULE_AUTHOR(DRV_PROJECT);
2822 MODULE_VERSION(DRV_VERSION);
2823 MODULE_DESCRIPTION("Ralink RT61 PCI & PCMCIA Wireless LAN driver.");
2824 MODULE_SUPPORTED_DEVICE("Ralink RT2561, RT2561s & RT2661 "
2825                         "PCI & PCMCIA chipset based cards");
2826 MODULE_DEVICE_TABLE(pci, rt61pci_device_table);
2827 MODULE_FIRMWARE(FIRMWARE_RT2561);
2828 MODULE_FIRMWARE(FIRMWARE_RT2561s);
2829 MODULE_FIRMWARE(FIRMWARE_RT2661);
2830 MODULE_LICENSE("GPL");
2831
2832 static struct pci_driver rt61pci_driver = {
2833         .name           = KBUILD_MODNAME,
2834         .id_table       = rt61pci_device_table,
2835         .probe          = rt2x00pci_probe,
2836         .remove         = __devexit_p(rt2x00pci_remove),
2837         .suspend        = rt2x00pci_suspend,
2838         .resume         = rt2x00pci_resume,
2839 };
2840
2841 static int __init rt61pci_init(void)
2842 {
2843         return pci_register_driver(&rt61pci_driver);
2844 }
2845
2846 static void __exit rt61pci_exit(void)
2847 {
2848         pci_unregister_driver(&rt61pci_driver);
2849 }
2850
2851 module_init(rt61pci_init);
2852 module_exit(rt61pci_exit);