12 This framework is designed to provide a generic interface for PHY
13 devices present in the kernel. This layer will have the generic
14 API by which phy drivers can create PHY using the phy framework and
15 phy users can obtain reference to the PHY. All the users of this
16 framework should select this config.
18 config PHY_BCM_NS_USB2
19 tristate "Broadcom Northstar USB 2.0 PHY Driver"
20 depends on ARCH_BCM_IPROC || COMPILE_TEST
21 depends on HAS_IOMEM && OF
24 Enable this to support Broadcom USB 2.0 PHY connected to the USB
25 controller on Northstar family.
28 tristate "Marvell Berlin USB PHY Driver"
29 depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
32 Enable this to support the USB PHY on Marvell Berlin SoCs.
34 config PHY_BERLIN_SATA
35 tristate "Marvell Berlin SATA PHY driver"
36 depends on ARCH_BERLIN && HAS_IOMEM && OF
39 Enable this to support the SATA PHY on Marvell Berlin SoCs.
41 config ARMADA375_USBCLUSTER_PHY
43 depends on MACH_ARMADA_375 || COMPILE_TEST
44 depends on OF && HAS_IOMEM
48 tristate "TI DA8xx USB PHY Driver"
49 depends on ARCH_DAVINCI_DA8XX
53 Enable this to support the USB PHY on DA8xx SoCs.
55 This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
58 tristate "TI dm816x USB PHY driver"
59 depends on ARCH_OMAP2PLUS
60 depends on USB_SUPPORT
64 Enable this for dm816x USB to work.
66 config PHY_EXYNOS_MIPI_VIDEO
67 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
69 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
71 default y if ARCH_S5PV210 || ARCH_EXYNOS
73 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
76 config PHY_LPC18XX_USB_OTG
77 tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
78 depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
82 Enable this to support NXP LPC18xx/43xx internal USB OTG PHY.
84 This driver is need for USB0 support on LPC18xx/43xx and takes
85 care of enabling and clock setup.
87 config PHY_PXA_28NM_HSIC
88 tristate "Marvell USB HSIC 28nm PHY Driver"
92 Enable this to support Marvell USB HSIC PHY driver for Marvell
93 SoC. This driver will do the PHY initialization and shutdown.
94 The PHY driver will be used by Marvell ehci driver.
96 To compile this driver as a module, choose M here.
98 config PHY_PXA_28NM_USB2
99 tristate "Marvell USB 2.0 28nm PHY Driver"
103 Enable this to support Marvell USB 2.0 PHY driver for Marvell
104 SoC. This driver will do the PHY initialization and shutdown.
105 The PHY driver will be used by Marvell udc/ehci/otg driver.
107 To compile this driver as a module, choose M here.
109 config PHY_MVEBU_SATA
111 depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
116 tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407"
120 Enable this to support the miphy transceiver (for SATA/PCIE/USB3)
121 that is part of STMicroelectronics STiH407 SoC.
124 tristate "STMicroelectronics MIPHY365X PHY driver for STiH41x series"
130 Enable this to support the miphy transceiver (for SATA/PCIE)
131 that is part of STMicroelectronics STiH41x SoC series.
134 tristate "Renesas R-Car generation 2 USB PHY driver"
135 depends on ARCH_RENESAS
136 depends on GENERIC_PHY
138 Support for USB PHY found on Renesas R-Car generation 2 SoCs.
140 config PHY_RCAR_GEN3_USB2
141 tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
142 depends on ARCH_RENESAS
146 Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs.
148 config OMAP_CONTROL_PHY
149 tristate "OMAP CONTROL PHY Driver"
150 depends on ARCH_OMAP2PLUS || COMPILE_TEST
152 Enable this to add support for the PHY part present in the control
153 module. This driver has API to power on the USB2 PHY and to write to
154 the mailbox. The mailbox is present only in omap4 and the register to
155 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
156 additional register to power on USB3 PHY/SATA PHY/PCIE PHY
160 tristate "OMAP USB2 PHY Driver"
161 depends on ARCH_OMAP2PLUS
162 depends on USB_SUPPORT
165 select OMAP_CONTROL_PHY
166 depends on OMAP_OCP2SCP
168 Enable this to support the transceiver that is part of SOC. This
169 driver takes care of all the PHY functionality apart from comparator.
170 The USB OTG controller communicates with the comparator using this
174 tristate "TI PIPE3 PHY Driver"
175 depends on ARCH_OMAP2PLUS || COMPILE_TEST
177 select OMAP_CONTROL_PHY
178 depends on OMAP_OCP2SCP
180 Enable this to support the PIPE3 PHY that is part of TI SOCs. This
181 driver takes care of all the PHY functionality apart from comparator.
182 This driver interacts with the "OMAP Control PHY Driver" to power
186 tristate "TWL4030 USB Transceiver Driver"
187 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
188 depends on USB_SUPPORT
189 depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
193 Enable this to support the USB OTG transceiver on TWL4030
194 family chips (including the TWL5030 and TPS659x0 devices).
195 This transceiver supports high and full speed devices plus,
196 in host mode, low speed.
198 config PHY_EXYNOS_DP_VIDEO
199 tristate "EXYNOS SoC series Display Port PHY driver"
201 depends on ARCH_EXYNOS || COMPILE_TEST
205 Support for Display Port PHY found on Samsung EXYNOS SoCs.
207 config BCM_KONA_USB2_PHY
208 tristate "Broadcom Kona USB2 PHY Driver"
212 Enable this to support the Broadcom Kona USB 2.0 PHY.
214 config PHY_EXYNOS5250_SATA
215 tristate "Exynos5250 Sata SerDes/PHY driver"
216 depends on SOC_EXYNOS5250
224 Enable this to support SATA SerDes/Phy found on Samsung's
225 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
226 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
227 port to accept one SATA device.
229 config PHY_HIX5HD2_SATA
230 tristate "HIX5HD2 SATA PHY Driver"
231 depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
235 Support for SATA PHY on Hisilicon hix5hd2 Soc.
237 config PHY_MT65XX_USB3
238 tristate "Mediatek USB3.0 PHY Driver"
239 depends on ARCH_MEDIATEK && OF
242 Say 'Y' here to add support for Mediatek USB3.0 PHY driver,
243 it supports multiple usb2.0 and usb3.0 ports.
245 config PHY_HI6220_USB
246 tristate "hi6220 USB PHY support"
247 depends on (ARCH_HISI && ARM64) || COMPILE_TEST
251 Enable this to support the HISILICON HI6220 USB PHY.
253 To compile this driver as a module, choose M here.
256 tristate "Allwinner sunxi SoC USB PHY driver"
257 depends on ARCH_SUNXI && HAS_IOMEM && OF
258 depends on RESET_CONTROLLER
260 depends on POWER_SUPPLY
263 Enable this to support the transceiver that is part of Allwinner
266 This driver controls the entire USB PHY block, both the USB OTG
267 parts, as well as the 2 regular USB 2 host PHYs.
270 tristate "Allwinner sun9i SoC USB PHY driver"
271 depends on ARCH_SUNXI && HAS_IOMEM && OF
272 depends on RESET_CONTROLLER
273 depends on USB_SUPPORT
277 Enable this to support the transceiver that is part of Allwinner
280 This driver controls each individual USB 2 host PHY.
282 config PHY_SAMSUNG_USB2
283 tristate "Samsung USB 2.0 PHY driver"
285 depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
290 Enable this to support the Samsung USB 2.0 PHY driver for Samsung
291 SoCs. This driver provides the interface for USB 2.0 PHY. Support
292 for particular PHYs will be enabled based on the SoC type in addition
295 config PHY_S5PV210_USB2
296 bool "Support for S5PV210"
297 depends on PHY_SAMSUNG_USB2
298 depends on ARCH_S5PV210
300 Enable USB PHY support for S5PV210. This option requires that Samsung
301 USB 2.0 PHY driver is enabled and means that support for this
302 particular SoC is compiled in the driver. In case of S5PV210 two phys
303 are available - device and host.
305 config PHY_EXYNOS4210_USB2
307 depends on PHY_SAMSUNG_USB2
308 default CPU_EXYNOS4210
310 config PHY_EXYNOS4X12_USB2
312 depends on PHY_SAMSUNG_USB2
313 default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
315 config PHY_EXYNOS5250_USB2
317 depends on PHY_SAMSUNG_USB2
318 default SOC_EXYNOS5250 || SOC_EXYNOS5420
320 config PHY_EXYNOS5_USBDRD
321 tristate "Exynos5 SoC series USB DRD PHY driver"
322 depends on ARCH_EXYNOS && OF
324 depends on USB_DWC3_EXYNOS
329 Enable USB DRD PHY support for Exynos 5 SoC series.
330 This driver provides PHY interface for USB 3.0 DRD controller
331 present on Exynos5 SoC series.
333 config PHY_PISTACHIO_USB
334 tristate "IMG Pistachio USB2.0 PHY driver"
335 depends on MACH_PISTACHIO
338 Enable this to support the USB2.0 PHY on the IMG Pistachio SoC.
340 config PHY_QCOM_APQ8064_SATA
341 tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
347 config PHY_QCOM_IPQ806X_SATA
348 tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
354 config PHY_ROCKCHIP_USB
355 tristate "Rockchip USB2 PHY Driver"
356 depends on ARCH_ROCKCHIP && OF
359 Enable this to support the Rockchip USB 2.0 PHY.
361 config PHY_ROCKCHIP_EMMC
362 tristate "Rockchip EMMC PHY Driver"
363 depends on ARCH_ROCKCHIP && OF
366 Enable this to support the Rockchip EMMC PHY.
368 config PHY_ROCKCHIP_DP
369 tristate "Rockchip Display Port PHY Driver"
370 depends on ARCH_ROCKCHIP && OF
373 Enable this to support the Rockchip Display Port PHY.
375 config PHY_ST_SPEAR1310_MIPHY
376 tristate "ST SPEAR1310-MIPHY driver"
378 depends on MACH_SPEAR1310 || COMPILE_TEST
380 Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA.
382 config PHY_ST_SPEAR1340_MIPHY
383 tristate "ST SPEAR1340-MIPHY driver"
385 depends on MACH_SPEAR1340 || COMPILE_TEST
387 Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA.
390 tristate "APM X-Gene 15Gbps PHY support"
391 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
394 This option enables support for APM X-Gene SoC multi-purpose PHY.
396 config PHY_STIH407_USB
397 tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
398 depends on RESET_CONTROLLER
399 depends on ARCH_STI || COMPILE_TEST
402 Enable this support to enable the picoPHY device used by USB2
403 and USB3 controllers on STMicroelectronics STiH407 SoC families.
405 config PHY_STIH41X_USB
406 tristate "STMicroelectronics USB2 PHY driver for STiH41x series"
410 Enable this to support the USB transceiver that is part of
411 STMicroelectronics STiH41x SoC series.
414 tristate "Qualcomm UFS PHY driver"
415 depends on OF && ARCH_QCOM
418 Support for UFS PHY on QCOM chipsets.
421 tristate "TI TUSB1210 ULPI PHY module"
422 depends on USB_ULPI_BUS
425 Support for TI TUSB1210 USB ULPI PHY.
428 tristate "Broadcom SATA PHY driver"
429 depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST
432 default ARCH_BCM_IPROC
434 Enable this to support the Broadcom SATA PHY.
437 config PHY_CYGNUS_PCIE
438 tristate "Broadcom Cygnus PCIe PHY driver"
439 depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
441 default ARCH_BCM_CYGNUS
443 Enable this to support the Broadcom Cygnus PCIe PHY.
446 source "drivers/phy/tegra/Kconfig"
449 tristate "Broadcom Northstar2 PCIe PHY driver"
450 depends on OF && MDIO_BUS_MUX_BCM_IPROC
452 default ARCH_BCM_IPROC
454 Enable this to support the Broadcom Northstar2 PCIe PHY.