]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/pinctrl/meson/pinctrl-meson.h
pinctrl: amlogic: Make driver independent from two-domain configuration
[karo-tx-linux.git] / drivers / pinctrl / meson / pinctrl-meson.h
1 /*
2  * Pin controller and GPIO driver for Amlogic Meson SoCs
3  *
4  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  *
10  * You should have received a copy of the GNU General Public License
11  * along with this program. If not, see <http://www.gnu.org/licenses/>.
12  */
13
14 #include <linux/gpio.h>
15 #include <linux/pinctrl/pinctrl.h>
16 #include <linux/regmap.h>
17 #include <linux/types.h>
18
19 /**
20  * struct meson_pmx_group - a pinmux group
21  *
22  * @name:       group name
23  * @pins:       pins in the group
24  * @num_pins:   number of pins in the group
25  * @is_gpio:    whether the group is a single GPIO group
26  * @reg:        register offset for the group in the domain mux registers
27  * @bit         bit index enabling the group
28  * @domain:     index of the domain this group belongs to
29  */
30 struct meson_pmx_group {
31         const char *name;
32         const unsigned int *pins;
33         unsigned int num_pins;
34         bool is_gpio;
35         unsigned int reg;
36         unsigned int bit;
37 };
38
39 /**
40  * struct meson_pmx_func - a pinmux function
41  *
42  * @name:       function name
43  * @groups:     groups in the function
44  * @num_groups: number of groups in the function
45  */
46 struct meson_pmx_func {
47         const char *name;
48         const char * const *groups;
49         unsigned int num_groups;
50 };
51
52 /**
53  * struct meson_reg_desc - a register descriptor
54  *
55  * @reg:        register offset in the regmap
56  * @bit:        bit index in register
57  *
58  * The structure describes the information needed to control pull,
59  * pull-enable, direction, etc. for a single pin
60  */
61 struct meson_reg_desc {
62         unsigned int reg;
63         unsigned int bit;
64 };
65
66 /**
67  * enum meson_reg_type - type of registers encoded in @meson_reg_desc
68  */
69 enum meson_reg_type {
70         REG_PULLEN,
71         REG_PULL,
72         REG_DIR,
73         REG_OUT,
74         REG_IN,
75         NUM_REG,
76 };
77
78 /**
79  * struct meson bank
80  *
81  * @name:       bank name
82  * @first:      first pin of the bank
83  * @last:       last pin of the bank
84  * @regs:       array of register descriptors
85  *
86  * A bank represents a set of pins controlled by a contiguous set of
87  * bits in the domain registers. The structure specifies which bits in
88  * the regmap control the different functionalities. Each member of
89  * the @regs array refers to the first pin of the bank.
90  */
91 struct meson_bank {
92         const char *name;
93         unsigned int first;
94         unsigned int last;
95         struct meson_reg_desc regs[NUM_REG];
96 };
97
98 /**
99  * struct meson_domain_data - domain platform data
100  *
101  * @name:       name of the domain
102  * @banks:      set of banks belonging to the domain
103  * @num_banks:  number of banks in the domain
104  */
105 struct meson_domain_data {
106         const char *name;
107         struct meson_bank *banks;
108         unsigned int num_banks;
109         unsigned int pin_base;
110         unsigned int num_pins;
111 };
112
113 /**
114  * struct meson_domain
115  *
116  * @reg_mux:    registers for mux settings
117  * @reg_pullen: registers for pull-enable settings
118  * @reg_pull:   registers for pull settings
119  * @reg_gpio:   registers for gpio settings
120  * @chip:       gpio chip associated with the domain
121  * @data;       platform data for the domain
122  * @node:       device tree node for the domain
123  *
124  * A domain represents a set of banks controlled by the same set of
125  * registers.
126  */
127 struct meson_domain {
128         struct regmap *reg_mux;
129         struct regmap *reg_pullen;
130         struct regmap *reg_pull;
131         struct regmap *reg_gpio;
132
133         struct gpio_chip chip;
134         struct meson_domain_data *data;
135         struct device_node *of_node;
136 };
137
138 struct meson_pinctrl_data {
139         const struct pinctrl_pin_desc *pins;
140         struct meson_pmx_group *groups;
141         struct meson_pmx_func *funcs;
142         struct meson_domain_data *domain_data;
143         unsigned int num_pins;
144         unsigned int num_groups;
145         unsigned int num_funcs;
146 };
147
148 struct meson_pinctrl {
149         struct device *dev;
150         struct pinctrl_dev *pcdev;
151         struct pinctrl_desc desc;
152         struct meson_pinctrl_data *data;
153         struct meson_domain *domain;
154 };
155
156 #define PIN(x, b)       (b + x)
157
158 #define GROUP(grp, r, b)                                                \
159         {                                                               \
160                 .name = #grp,                                           \
161                 .pins = grp ## _pins,                                   \
162                 .num_pins = ARRAY_SIZE(grp ## _pins),                   \
163                 .reg = r,                                               \
164                 .bit = b,                                               \
165          }
166
167 #define GPIO_GROUP(gpio, b)                                             \
168         {                                                               \
169                 .name = #gpio,                                          \
170                 .pins = (const unsigned int[]){ PIN(gpio, b) },         \
171                 .num_pins = 1,                                          \
172                 .is_gpio = true,                                        \
173          }
174
175 #define FUNCTION(fn)                                                    \
176         {                                                               \
177                 .name = #fn,                                            \
178                 .groups = fn ## _groups,                                \
179                 .num_groups = ARRAY_SIZE(fn ## _groups),                \
180         }
181
182 #define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib)         \
183         {                                                               \
184                 .name   = n,                                            \
185                 .first  = f,                                            \
186                 .last   = l,                                            \
187                 .regs   = {                                             \
188                         [REG_PULLEN]    = { per, peb },                 \
189                         [REG_PULL]      = { pr, pb },                   \
190                         [REG_DIR]       = { dr, db },                   \
191                         [REG_OUT]       = { or, ob },                   \
192                         [REG_IN]        = { ir, ib },                   \
193                 },                                                      \
194          }
195
196 #define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)
197
198 extern struct meson_pinctrl_data meson8_cbus_pinctrl_data;
199 extern struct meson_pinctrl_data meson8_aobus_pinctrl_data;
200 extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data;
201 extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data;