]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/power/reset/piix4-poweroff.c
power: reset: Add Intel PIIX4 poweroff driver
[karo-tx-linux.git] / drivers / power / reset / piix4-poweroff.c
1 /*
2  * Copyright (C) 2016 Imagination Technologies
3  * Author: Paul Burton <paul.burton@imgtec.com>
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of the GNU General Public License as published by the
7  * Free Software Foundation; either version 2 of the License, or (at your
8  * option) any later version.
9  */
10
11 #include <linux/delay.h>
12 #include <linux/io.h>
13 #include <linux/module.h>
14 #include <linux/pci.h>
15 #include <linux/pm.h>
16
17 static struct pci_dev *pm_dev;
18 static resource_size_t io_offset;
19
20 enum piix4_pm_io_reg {
21         PIIX4_FUNC3IO_PMSTS                     = 0x00,
22 #define PIIX4_FUNC3IO_PMSTS_PWRBTN_STS          BIT(8)
23         PIIX4_FUNC3IO_PMCNTRL                   = 0x04,
24 #define PIIX4_FUNC3IO_PMCNTRL_SUS_EN            BIT(13)
25 #define PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF      (0x0 << 10)
26 };
27
28 #define PIIX4_SUSPEND_MAGIC                     0x00120002
29
30 static const int piix4_pm_io_region = PCI_BRIDGE_RESOURCES;
31
32 static void piix4_poweroff(void)
33 {
34         int spec_devid;
35         u16 sts;
36
37         /* Ensure the power button status is clear */
38         while (1) {
39                 sts = inw(io_offset + PIIX4_FUNC3IO_PMSTS);
40                 if (!(sts & PIIX4_FUNC3IO_PMSTS_PWRBTN_STS))
41                         break;
42                 outw(sts, io_offset + PIIX4_FUNC3IO_PMSTS);
43         }
44
45         /* Enable entry to suspend */
46         outw(PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF | PIIX4_FUNC3IO_PMCNTRL_SUS_EN,
47              io_offset + PIIX4_FUNC3IO_PMCNTRL);
48
49         /* If the special cycle occurs too soon this doesn't work... */
50         mdelay(10);
51
52         /*
53          * The PIIX4 will enter the suspend state only after seeing a special
54          * cycle with the correct magic data on the PCI bus. Generate that
55          * cycle now.
56          */
57         spec_devid = PCI_DEVID(0, PCI_DEVFN(0x1f, 0x7));
58         pci_bus_write_config_dword(pm_dev->bus, spec_devid, 0,
59                                    PIIX4_SUSPEND_MAGIC);
60
61         /* Give the system some time to power down, then error */
62         mdelay(1000);
63         pr_emerg("Unable to poweroff system\n");
64 }
65
66 static int piix4_poweroff_probe(struct pci_dev *dev,
67                                 const struct pci_device_id *id)
68 {
69         int res;
70
71         if (pm_dev)
72                 return -EINVAL;
73
74         /* Request access to the PIIX4 PM IO registers */
75         res = pci_request_region(dev, piix4_pm_io_region,
76                                  "PIIX4 PM IO registers");
77         if (res) {
78                 dev_err(&dev->dev, "failed to request PM IO registers: %d\n",
79                         res);
80                 return res;
81         }
82
83         pm_dev = dev;
84         io_offset = pci_resource_start(dev, piix4_pm_io_region);
85         pm_power_off = piix4_poweroff;
86
87         return 0;
88 }
89
90 static void piix4_poweroff_remove(struct pci_dev *dev)
91 {
92         if (pm_power_off == piix4_poweroff)
93                 pm_power_off = NULL;
94
95         pci_release_region(dev, piix4_pm_io_region);
96         pm_dev = NULL;
97 }
98
99 static const struct pci_device_id piix4_poweroff_ids[] = {
100         { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
101         { 0 },
102 };
103
104 static struct pci_driver piix4_poweroff_driver = {
105         .name           = "piix4-poweroff",
106         .id_table       = piix4_poweroff_ids,
107         .probe          = piix4_poweroff_probe,
108         .remove         = piix4_poweroff_remove,
109 };
110
111 module_pci_driver(piix4_poweroff_driver);
112 MODULE_AUTHOR("Paul Burton <paul.burton@imgtec.com>");
113 MODULE_LICENSE("GPL");