2 * Regulator driver for tps65090 power management chip.
4 * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License
16 * along with this program. If not, see <http://www.gnu.org/licenses/>
19 #include <linux/module.h>
20 #include <linux/delay.h>
21 #include <linux/init.h>
22 #include <linux/gpio.h>
23 #include <linux/of_gpio.h>
24 #include <linux/slab.h>
25 #include <linux/err.h>
26 #include <linux/platform_device.h>
27 #include <linux/regulator/driver.h>
28 #include <linux/regulator/machine.h>
29 #include <linux/regulator/of_regulator.h>
30 #include <linux/mfd/tps65090.h>
32 #define MAX_CTRL_READ_TRIES 5
33 #define MAX_FET_ENABLE_TRIES 1000
35 #define CTRL_EN_BIT 0 /* Regulator enable bit, active high */
36 #define CTRL_WT_BIT 2 /* Regulator wait time 0 bit */
37 #define CTRL_PG_BIT 4 /* Regulator power good bit, 1=good */
38 #define CTRL_TO_BIT 7 /* Regulator timeout bit, 1=wait */
40 #define MAX_OVERCURRENT_WAIT 3 /* Overcurrent wait must be <= this */
43 * struct tps65090_regulator - Per-regulator data for a tps65090 regulator
45 * @dev: Pointer to our device.
46 * @desc: The struct regulator_desc for the regulator.
47 * @rdev: The struct regulator_dev for the regulator.
48 * @overcurrent_wait_valid: True if overcurrent_wait is valid.
49 * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
52 struct tps65090_regulator {
54 struct regulator_desc *desc;
55 struct regulator_dev *rdev;
56 bool overcurrent_wait_valid;
60 static struct regulator_ops tps65090_ext_control_ops = {
64 * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
66 * This will set the overcurrent wait time based on what's in the regulator
69 * @ri: Overall regulator data
70 * @rdev: Regulator device
72 * Return: 0 if no error, non-zero if there was an error writing the register.
74 static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri,
75 struct regulator_dev *rdev)
79 ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
80 MAX_OVERCURRENT_WAIT << CTRL_WT_BIT,
81 ri->overcurrent_wait << CTRL_WT_BIT);
83 dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n",
84 rdev->desc->enable_reg);
91 * tps65090_try_enable_fet - Try to enable a FET
93 * @rdev: Regulator device
95 * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
96 * set, or some other -ve value if another error occurred (e.g. i2c error)
98 static int tps65090_try_enable_fet(struct regulator_dev *rdev)
100 unsigned int control;
103 ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
104 rdev->desc->enable_mask,
105 rdev->desc->enable_mask);
107 dev_err(&rdev->dev, "Error in updating reg %#x\n",
108 rdev->desc->enable_reg);
112 for (i = 0; i < MAX_CTRL_READ_TRIES; i++) {
113 ret = regmap_read(rdev->regmap, rdev->desc->enable_reg,
118 if (!(control & BIT(CTRL_TO_BIT)))
121 usleep_range(1000, 1500);
123 if (!(control & BIT(CTRL_PG_BIT)))
124 return -ENOTRECOVERABLE;
130 * tps65090_fet_enable - Enable a FET, trying a few times if it fails
132 * Some versions of the tps65090 have issues when turning on the FETs.
133 * This function goes through several steps to ensure the best chance of the
134 * FET going on. Specifically:
135 * - We'll make sure that we bump the "overcurrent wait" to the maximum, which
136 * increases the chances that we'll turn on properly.
137 * - We'll retry turning the FET on multiple times (turning off in between).
139 * @rdev: Regulator device
141 * Return: 0 if ok, non-zero if it fails.
143 static int tps65090_fet_enable(struct regulator_dev *rdev)
148 * Try enabling multiple times until we succeed since sometimes the
149 * first try times out.
153 ret = tps65090_try_enable_fet(rdev);
156 if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES)
159 /* Try turning the FET off (and then on again) */
160 ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
161 rdev->desc->enable_mask, 0);
169 dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n",
170 rdev->desc->enable_reg, tries);
174 dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg);
180 static struct regulator_ops tps65090_reg_control_ops = {
181 .enable = regulator_enable_regmap,
182 .disable = regulator_disable_regmap,
183 .is_enabled = regulator_is_enabled_regmap,
186 static struct regulator_ops tps65090_fet_control_ops = {
187 .enable = tps65090_fet_enable,
188 .disable = regulator_disable_regmap,
189 .is_enabled = regulator_is_enabled_regmap,
192 static struct regulator_ops tps65090_ldo_ops = {
195 #define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
197 .name = "TPS65090_RAILS"#_id, \
198 .supply_name = _sname, \
199 .id = TPS65090_REGULATOR_##_id, \
200 .n_voltages = _nvolt, \
203 .enable_reg = _en_reg, \
204 .enable_val = _en_bits, \
205 .enable_mask = _en_bits, \
206 .type = REGULATOR_VOLTAGE, \
207 .owner = THIS_MODULE, \
210 #define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
211 tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
213 #define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
214 tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
216 static struct regulator_desc tps65090_regulator_desc[] = {
217 tps65090_REG_FIXEDV(DCDC1, "vsys1", 0x0C, BIT(CTRL_EN_BIT), 5000000,
218 tps65090_reg_control_ops),
219 tps65090_REG_FIXEDV(DCDC2, "vsys2", 0x0D, BIT(CTRL_EN_BIT), 3300000,
220 tps65090_reg_control_ops),
221 tps65090_REG_SWITCH(DCDC3, "vsys3", 0x0E, BIT(CTRL_EN_BIT),
222 tps65090_reg_control_ops),
224 tps65090_REG_SWITCH(FET1, "infet1", 0x0F,
225 BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
226 tps65090_fet_control_ops),
227 tps65090_REG_SWITCH(FET2, "infet2", 0x10,
228 BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
229 tps65090_fet_control_ops),
230 tps65090_REG_SWITCH(FET3, "infet3", 0x11,
231 BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
232 tps65090_fet_control_ops),
233 tps65090_REG_SWITCH(FET4, "infet4", 0x12,
234 BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
235 tps65090_fet_control_ops),
236 tps65090_REG_SWITCH(FET5, "infet5", 0x13,
237 BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
238 tps65090_fet_control_ops),
239 tps65090_REG_SWITCH(FET6, "infet6", 0x14,
240 BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
241 tps65090_fet_control_ops),
242 tps65090_REG_SWITCH(FET7, "infet7", 0x15,
243 BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
244 tps65090_fet_control_ops),
246 tps65090_REG_FIXEDV(LDO1, "vsys-l1", 0, 0, 5000000,
248 tps65090_REG_FIXEDV(LDO2, "vsys-l2", 0, 0, 3300000,
252 static inline bool is_dcdc(int id)
255 case TPS65090_REGULATOR_DCDC1:
256 case TPS65090_REGULATOR_DCDC2:
257 case TPS65090_REGULATOR_DCDC3:
264 static int tps65090_config_ext_control(
265 struct tps65090_regulator *ri, bool enable)
268 struct device *parent = ri->dev->parent;
269 unsigned int reg_en_reg = ri->desc->enable_reg;
272 ret = tps65090_set_bits(parent, reg_en_reg, 1);
274 ret = tps65090_clr_bits(parent, reg_en_reg, 1);
276 dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg);
280 static int tps65090_regulator_disable_ext_control(
281 struct tps65090_regulator *ri,
282 struct tps65090_regulator_plat_data *tps_pdata)
285 struct device *parent = ri->dev->parent;
286 unsigned int reg_en_reg = ri->desc->enable_reg;
289 * First enable output for internal control if require.
290 * And then disable external control.
292 if (tps_pdata->reg_init_data->constraints.always_on ||
293 tps_pdata->reg_init_data->constraints.boot_on) {
294 ret = tps65090_set_bits(parent, reg_en_reg, 0);
296 dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg);
300 return tps65090_config_ext_control(ri, false);
303 static void tps65090_configure_regulator_config(
304 struct tps65090_regulator_plat_data *tps_pdata,
305 struct regulator_config *config)
307 if (gpio_is_valid(tps_pdata->gpio)) {
308 int gpio_flag = GPIOF_OUT_INIT_LOW;
310 if (tps_pdata->reg_init_data->constraints.always_on ||
311 tps_pdata->reg_init_data->constraints.boot_on)
312 gpio_flag = GPIOF_OUT_INIT_HIGH;
314 config->ena_gpio = tps_pdata->gpio;
315 config->ena_gpio_initialized = true;
316 config->ena_gpio_flags = gpio_flag;
318 config->ena_gpio = -EINVAL;
319 config->ena_gpio_initialized = false;
324 static struct of_regulator_match tps65090_matches[] = {
325 { .name = "dcdc1", },
326 { .name = "dcdc2", },
327 { .name = "dcdc3", },
339 static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
340 struct platform_device *pdev,
341 struct of_regulator_match **tps65090_reg_matches)
343 struct tps65090_platform_data *tps65090_pdata;
344 struct device_node *np = pdev->dev.parent->of_node;
345 struct device_node *regulators;
347 struct tps65090_regulator_plat_data *reg_pdata;
349 tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata),
352 return ERR_PTR(-ENOMEM);
354 reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX *
355 sizeof(*reg_pdata), GFP_KERNEL);
357 return ERR_PTR(-ENOMEM);
359 regulators = of_get_child_by_name(np, "regulators");
361 dev_err(&pdev->dev, "regulator node not found\n");
362 return ERR_PTR(-ENODEV);
365 ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches,
366 ARRAY_SIZE(tps65090_matches));
367 of_node_put(regulators);
370 "Error parsing regulator init data: %d\n", ret);
374 *tps65090_reg_matches = tps65090_matches;
375 for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
376 struct regulator_init_data *ri_data;
377 struct tps65090_regulator_plat_data *rpdata;
379 rpdata = ®_pdata[idx];
380 ri_data = tps65090_matches[idx].init_data;
381 if (!ri_data || !tps65090_matches[idx].of_node)
384 rpdata->reg_init_data = ri_data;
385 rpdata->enable_ext_control = of_property_read_bool(
386 tps65090_matches[idx].of_node,
387 "ti,enable-ext-control");
388 if (rpdata->enable_ext_control)
389 rpdata->gpio = of_get_named_gpio(np,
390 "dcdc-ext-control-gpios", 0);
392 if (of_property_read_u32(tps65090_matches[idx].of_node,
393 "ti,overcurrent-wait",
394 &rpdata->overcurrent_wait) == 0)
395 rpdata->overcurrent_wait_valid = true;
397 tps65090_pdata->reg_pdata[idx] = rpdata;
399 return tps65090_pdata;
402 static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
403 struct platform_device *pdev,
404 struct of_regulator_match **tps65090_reg_matches)
406 *tps65090_reg_matches = NULL;
411 static int tps65090_regulator_probe(struct platform_device *pdev)
413 struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
414 struct tps65090_regulator *ri = NULL;
415 struct regulator_config config = { };
416 struct regulator_dev *rdev;
417 struct tps65090_regulator_plat_data *tps_pdata;
418 struct tps65090_regulator *pmic;
419 struct tps65090_platform_data *tps65090_pdata;
420 struct of_regulator_match *tps65090_reg_matches = NULL;
424 dev_dbg(&pdev->dev, "Probing regulator\n");
426 tps65090_pdata = dev_get_platdata(pdev->dev.parent);
427 if (!tps65090_pdata && tps65090_mfd->dev->of_node)
428 tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
429 &tps65090_reg_matches);
430 if (IS_ERR_OR_NULL(tps65090_pdata)) {
431 dev_err(&pdev->dev, "Platform data missing\n");
432 return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL;
435 pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic),
440 for (num = 0; num < TPS65090_REGULATOR_MAX; num++) {
441 tps_pdata = tps65090_pdata->reg_pdata[num];
444 ri->dev = &pdev->dev;
445 ri->desc = &tps65090_regulator_desc[num];
447 ri->overcurrent_wait_valid =
448 tps_pdata->overcurrent_wait_valid;
449 ri->overcurrent_wait = tps_pdata->overcurrent_wait;
453 * TPS5090 DCDC support the control from external digital input.
454 * Configure it as per platform data.
456 if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
457 if (tps_pdata->enable_ext_control) {
458 tps65090_configure_regulator_config(
460 ri->desc->ops = &tps65090_ext_control_ops;
462 ret = tps65090_regulator_disable_ext_control(
466 "failed disable ext control\n");
472 config.dev = pdev->dev.parent;
473 config.driver_data = ri;
474 config.regmap = tps65090_mfd->rmap;
476 config.init_data = tps_pdata->reg_init_data;
478 config.init_data = NULL;
479 if (tps65090_reg_matches)
480 config.of_node = tps65090_reg_matches[num].of_node;
482 config.of_node = NULL;
484 rdev = devm_regulator_register(&pdev->dev, ri->desc, &config);
486 dev_err(&pdev->dev, "failed to register regulator %s\n",
488 return PTR_ERR(rdev);
492 if (ri->overcurrent_wait_valid) {
493 ret = tps65090_reg_set_overcurrent_wait(ri, rdev);
498 /* Enable external control if it is require */
499 if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data &&
500 tps_pdata->enable_ext_control) {
501 ret = tps65090_config_ext_control(ri, true);
507 platform_set_drvdata(pdev, pmic);
511 static struct platform_driver tps65090_regulator_driver = {
513 .name = "tps65090-pmic",
515 .probe = tps65090_regulator_probe,
518 static int __init tps65090_regulator_init(void)
520 return platform_driver_register(&tps65090_regulator_driver);
522 subsys_initcall(tps65090_regulator_init);
524 static void __exit tps65090_regulator_exit(void)
526 platform_driver_unregister(&tps65090_regulator_driver);
528 module_exit(tps65090_regulator_exit);
530 MODULE_DESCRIPTION("tps65090 regulator driver");
531 MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
532 MODULE_LICENSE("GPL v2");
533 MODULE_ALIAS("platform:tps65090-pmic");