2 * twl-regulator.c -- support regulators in twl4030/twl6030 family chips
4 * Copyright (C) 2008 David Brownell
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
12 #include <linux/module.h>
13 #include <linux/init.h>
14 #include <linux/err.h>
15 #include <linux/delay.h>
16 #include <linux/platform_device.h>
17 #include <linux/regulator/driver.h>
18 #include <linux/regulator/machine.h>
19 #include <linux/i2c/twl.h>
23 * The TWL4030/TW5030/TPS659x0/TWL6030 family chips include power management, a
24 * USB OTG transceiver, an RTC, ADC, PWM, and lots more. Some versions
25 * include an audio codec, battery charger, and more voltage regulators.
26 * These chips are often used in OMAP-based systems.
28 * This driver implements software-based resource control for various
29 * voltage regulators. This is usually augmented with state machine
34 /* start of regulator's PM_RECEIVER control register bank */
37 /* twl resource ID, for resource control state machine */
40 /* voltage in mV = table[VSEL]; table_len must be a power-of-two */
44 /* regulator specific turn-on delay */
47 /* State REMAP default configuration */
50 /* chip constraints on regulator behavior */
54 /* used by regulator core */
55 struct regulator_desc desc;
59 /* LDO control registers ... offset is from the base of its register bank.
60 * The first three registers of all power resource banks help hardware to
61 * manage the various resource groups.
63 /* Common offset in TWL4030/6030 */
65 /* TWL4030 register offsets */
68 #define VREG_DEDICATED 3 /* LDO control */
69 /* TWL6030 register offsets */
72 #define VREG_VOLTAGE 3
73 /* TWL6030 Misc register offsets */
76 #define VREG_BC_PROC 3
77 #define VREG_BC_CLK_RST 4
79 /* TWL6030 LDO register values for CFG_STATE */
80 #define TWL6030_CFG_STATE_OFF 0x00
81 #define TWL6030_CFG_STATE_ON 0x01
82 #define TWL6030_CFG_STATE_OFF2 0x02
83 #define TWL6030_CFG_STATE_SLEEP 0x03
84 #define TWL6030_CFG_STATE_GRP_SHIFT 5
85 #define TWL6030_CFG_STATE_APP_SHIFT 2
86 #define TWL6030_CFG_STATE_APP_MASK (0x03 << TWL6030_CFG_STATE_APP_SHIFT)
87 #define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\
88 TWL6030_CFG_STATE_APP_SHIFT)
91 twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset)
96 status = twl_i2c_read_u8(slave_subgp,
97 &value, info->base + offset);
98 return (status < 0) ? status : value;
102 twlreg_write(struct twlreg_info *info, unsigned slave_subgp, unsigned offset,
105 return twl_i2c_write_u8(slave_subgp,
106 value, info->base + offset);
109 /*----------------------------------------------------------------------*/
111 /* generic power resource operations, which work on all regulators */
113 static int twlreg_grp(struct regulator_dev *rdev)
115 return twlreg_read(rdev_get_drvdata(rdev), TWL_MODULE_PM_RECEIVER,
120 * Enable/disable regulators by joining/leaving the P1 (processor) group.
121 * We assume nobody else is updating the DEV_GRP registers.
123 /* definition for 4030 family */
124 #define P3_GRP_4030 BIT(7) /* "peripherals" */
125 #define P2_GRP_4030 BIT(6) /* secondary processor, modem, etc */
126 #define P1_GRP_4030 BIT(5) /* CPU/Linux */
127 /* definition for 6030 family */
128 #define P3_GRP_6030 BIT(2) /* secondary processor, modem, etc */
129 #define P2_GRP_6030 BIT(1) /* "peripherals" */
130 #define P1_GRP_6030 BIT(0) /* CPU/Linux */
132 static int twl4030reg_is_enabled(struct regulator_dev *rdev)
134 int state = twlreg_grp(rdev);
139 return state & P1_GRP_4030;
142 static int twl6030reg_is_enabled(struct regulator_dev *rdev)
144 struct twlreg_info *info = rdev_get_drvdata(rdev);
147 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
153 val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
154 val = TWL6030_CFG_STATE_APP(val);
156 return grp && (val == TWL6030_CFG_STATE_ON);
159 static int twl4030reg_enable(struct regulator_dev *rdev)
161 struct twlreg_info *info = rdev_get_drvdata(rdev);
165 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
171 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
178 static int twl6030reg_enable(struct regulator_dev *rdev)
180 struct twlreg_info *info = rdev_get_drvdata(rdev);
184 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
188 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
189 grp << TWL6030_CFG_STATE_GRP_SHIFT |
190 TWL6030_CFG_STATE_ON);
197 static int twlreg_disable(struct regulator_dev *rdev)
199 struct twlreg_info *info = rdev_get_drvdata(rdev);
203 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
207 /* For 6030, set the off state for all grps enabled */
208 if (twl_class_is_6030()) {
209 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
210 (grp & (P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030)) <<
211 TWL6030_CFG_STATE_GRP_SHIFT |
212 TWL6030_CFG_STATE_OFF);
217 if (twl_class_is_4030())
218 grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030);
220 grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030);
222 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp);
224 /* Next, associate cleared grp in state register */
225 if (!ret && twl_class_is_6030())
226 ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE,
227 grp << TWL6030_CFG_STATE_GRP_SHIFT |
228 TWL6030_CFG_STATE_OFF);
233 static int twl4030reg_get_status(struct regulator_dev *rdev)
235 int state = twlreg_grp(rdev);
241 /* assume state != WARM_RESET; we'd not be running... */
243 return REGULATOR_STATUS_OFF;
244 return (state & BIT(3))
245 ? REGULATOR_STATUS_NORMAL
246 : REGULATOR_STATUS_STANDBY;
249 static int twl6030reg_get_status(struct regulator_dev *rdev)
251 struct twlreg_info *info = rdev_get_drvdata(rdev);
254 val = twlreg_grp(rdev);
258 val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE);
260 switch (TWL6030_CFG_STATE_APP(val)) {
261 case TWL6030_CFG_STATE_ON:
262 return REGULATOR_STATUS_NORMAL;
264 case TWL6030_CFG_STATE_SLEEP:
265 return REGULATOR_STATUS_STANDBY;
267 case TWL6030_CFG_STATE_OFF:
268 case TWL6030_CFG_STATE_OFF2:
273 return REGULATOR_STATUS_OFF;
276 static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
278 struct twlreg_info *info = rdev_get_drvdata(rdev);
282 /* We can only set the mode through state machine commands... */
284 case REGULATOR_MODE_NORMAL:
285 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_ACTIVE);
287 case REGULATOR_MODE_STANDBY:
288 message = MSG_SINGULAR(DEV_GRP_P1, info->id, RES_STATE_SLEEP);
294 /* Ensure the resource is associated with some group */
295 status = twlreg_grp(rdev);
298 if (!(status & (P3_GRP_4030 | P2_GRP_4030 | P1_GRP_4030)))
301 status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
302 message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
306 return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
307 message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
310 static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
312 struct twlreg_info *info = rdev_get_drvdata(rdev);
316 grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP);
321 /* Compose the state register settings */
322 val = grp << TWL6030_CFG_STATE_GRP_SHIFT;
323 /* We can only set the mode through state machine commands... */
325 case REGULATOR_MODE_NORMAL:
326 val |= TWL6030_CFG_STATE_ON;
328 case REGULATOR_MODE_STANDBY:
329 val |= TWL6030_CFG_STATE_SLEEP;
336 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, val);
339 /*----------------------------------------------------------------------*/
342 * Support for adjustable-voltage LDOs uses a four bit (or less) voltage
343 * select field in its control register. We use tables indexed by VSEL
344 * to record voltages in milliVolts. (Accuracy is about three percent.)
346 * Note that VSEL values for VAUX2 changed in twl5030 and newer silicon;
347 * currently handled by listing two slightly different VAUX2 regulators,
348 * only one of which will be configured.
350 * VSEL values documented as "TI cannot support these values" are flagged
351 * in these tables as UNSUP() values; we normally won't assign them.
353 * VAUX3 at 3V is incorrectly listed in some TI manuals as unsupported.
354 * TI are revising the twl5030/tps659x0 specs to support that 3.0V setting.
356 #ifdef CONFIG_TWL4030_ALLOW_UNSUPPORTED
357 #define UNSUP_MASK 0x0000
359 #define UNSUP_MASK 0x8000
362 #define UNSUP(x) (UNSUP_MASK | (x))
363 #define IS_UNSUP(x) (UNSUP_MASK & (x))
364 #define LDO_MV(x) (~UNSUP_MASK & (x))
367 static const u16 VAUX1_VSEL_table[] = {
368 UNSUP(1500), UNSUP(1800), 2500, 2800,
369 3000, 3000, 3000, 3000,
371 static const u16 VAUX2_4030_VSEL_table[] = {
372 UNSUP(1000), UNSUP(1000), UNSUP(1200), 1300,
373 1500, 1800, UNSUP(1850), 2500,
374 UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
375 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
377 static const u16 VAUX2_VSEL_table[] = {
378 1700, 1700, 1900, 1300,
379 1500, 1800, 2000, 2500,
380 2100, 2800, 2200, 2300,
381 2400, 2400, 2400, 2400,
383 static const u16 VAUX3_VSEL_table[] = {
384 1500, 1800, 2500, 2800,
385 3000, 3000, 3000, 3000,
387 static const u16 VAUX4_VSEL_table[] = {
388 700, 1000, 1200, UNSUP(1300),
389 1500, 1800, UNSUP(1850), 2500,
390 UNSUP(2600), 2800, UNSUP(2850), UNSUP(3000),
391 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
393 static const u16 VMMC1_VSEL_table[] = {
394 1850, 2850, 3000, 3150,
396 static const u16 VMMC2_VSEL_table[] = {
397 UNSUP(1000), UNSUP(1000), UNSUP(1200), UNSUP(1300),
398 UNSUP(1500), UNSUP(1800), 1850, UNSUP(2500),
399 2600, 2800, 2850, 3000,
400 3150, 3150, 3150, 3150,
402 static const u16 VPLL1_VSEL_table[] = {
403 1000, 1200, 1300, 1800,
404 UNSUP(2800), UNSUP(3000), UNSUP(3000), UNSUP(3000),
406 static const u16 VPLL2_VSEL_table[] = {
407 700, 1000, 1200, 1300,
408 UNSUP(1500), 1800, UNSUP(1850), UNSUP(2500),
409 UNSUP(2600), UNSUP(2800), UNSUP(2850), UNSUP(3000),
410 UNSUP(3150), UNSUP(3150), UNSUP(3150), UNSUP(3150),
412 static const u16 VSIM_VSEL_table[] = {
413 UNSUP(1000), UNSUP(1200), UNSUP(1300), 1800,
414 2800, 3000, 3000, 3000,
416 static const u16 VDAC_VSEL_table[] = {
417 1200, 1300, 1800, 1800,
419 static const u16 VDD1_VSEL_table[] = {
422 static const u16 VDD2_VSEL_table[] = {
425 static const u16 VIO_VSEL_table[] = {
428 static const u16 VINTANA2_VSEL_table[] = {
432 static int twl4030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
434 struct twlreg_info *info = rdev_get_drvdata(rdev);
435 int mV = info->table[index];
437 return IS_UNSUP(mV) ? 0 : (LDO_MV(mV) * 1000);
441 twl4030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
444 struct twlreg_info *info = rdev_get_drvdata(rdev);
447 for (vsel = 0; vsel < info->table_len; vsel++) {
448 int mV = info->table[vsel];
453 uV = LDO_MV(mV) * 1000;
455 /* REVISIT for VAUX2, first match may not be best/lowest */
457 /* use the first in-range value */
458 if (min_uV <= uV && uV <= max_uV) {
460 return twlreg_write(info, TWL_MODULE_PM_RECEIVER,
468 static int twl4030ldo_get_voltage(struct regulator_dev *rdev)
470 struct twlreg_info *info = rdev_get_drvdata(rdev);
471 int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
477 vsel &= info->table_len - 1;
478 return LDO_MV(info->table[vsel]) * 1000;
481 static struct regulator_ops twl4030ldo_ops = {
482 .list_voltage = twl4030ldo_list_voltage,
484 .set_voltage = twl4030ldo_set_voltage,
485 .get_voltage = twl4030ldo_get_voltage,
487 .enable = twl4030reg_enable,
488 .disable = twlreg_disable,
489 .is_enabled = twl4030reg_is_enabled,
491 .set_mode = twl4030reg_set_mode,
493 .get_status = twl4030reg_get_status,
496 static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index)
498 struct twlreg_info *info = rdev_get_drvdata(rdev);
500 return ((info->min_mV + (index * 100)) * 1000);
504 twl6030ldo_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
507 struct twlreg_info *info = rdev_get_drvdata(rdev);
510 if ((min_uV/1000 < info->min_mV) || (max_uV/1000 > info->max_mV))
514 * Use the below formula to calculate vsel
515 * mV = 1000mv + 100mv * (vsel - 1)
517 vsel = (min_uV/1000 - 1000)/100 + 1;
519 return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE, vsel);
523 static int twl6030ldo_get_voltage(struct regulator_dev *rdev)
525 struct twlreg_info *info = rdev_get_drvdata(rdev);
526 int vsel = twlreg_read(info, TWL_MODULE_PM_RECEIVER,
533 * Use the below formula to calculate vsel
534 * mV = 1000mv + 100mv * (vsel - 1)
536 return (1000 + (100 * (vsel - 1))) * 1000;
539 static struct regulator_ops twl6030ldo_ops = {
540 .list_voltage = twl6030ldo_list_voltage,
542 .set_voltage = twl6030ldo_set_voltage,
543 .get_voltage = twl6030ldo_get_voltage,
545 .enable = twl6030reg_enable,
546 .disable = twlreg_disable,
547 .is_enabled = twl6030reg_is_enabled,
549 .set_mode = twl6030reg_set_mode,
551 .get_status = twl6030reg_get_status,
554 /*----------------------------------------------------------------------*/
557 * Fixed voltage LDOs don't have a VSEL field to update.
559 static int twlfixed_list_voltage(struct regulator_dev *rdev, unsigned index)
561 struct twlreg_info *info = rdev_get_drvdata(rdev);
563 return info->min_mV * 1000;
566 static int twlfixed_get_voltage(struct regulator_dev *rdev)
568 struct twlreg_info *info = rdev_get_drvdata(rdev);
570 return info->min_mV * 1000;
573 static struct regulator_ops twl4030fixed_ops = {
574 .list_voltage = twlfixed_list_voltage,
576 .get_voltage = twlfixed_get_voltage,
578 .enable = twl4030reg_enable,
579 .disable = twlreg_disable,
580 .is_enabled = twl4030reg_is_enabled,
582 .set_mode = twl4030reg_set_mode,
584 .get_status = twl4030reg_get_status,
587 static struct regulator_ops twl6030fixed_ops = {
588 .list_voltage = twlfixed_list_voltage,
590 .get_voltage = twlfixed_get_voltage,
592 .enable = twl6030reg_enable,
593 .disable = twlreg_disable,
594 .is_enabled = twl6030reg_is_enabled,
596 .set_mode = twl6030reg_set_mode,
598 .get_status = twl6030reg_get_status,
601 static struct regulator_ops twl6030_fixed_resource = {
602 .enable = twl6030reg_enable,
603 .disable = twlreg_disable,
604 .is_enabled = twl6030reg_is_enabled,
605 .get_status = twl6030reg_get_status,
608 /*----------------------------------------------------------------------*/
610 #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
612 TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
613 remap_conf, TWL4030, twl4030fixed_ops)
614 #define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay) \
615 TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
616 0x0, TWL6030, twl6030fixed_ops)
618 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) { \
621 .table_len = ARRAY_SIZE(label##_VSEL_table), \
622 .table = label##_VSEL_table, \
623 .delay = turnon_delay, \
624 .remap = remap_conf, \
627 .id = TWL4030_REG_##label, \
628 .n_voltages = ARRAY_SIZE(label##_VSEL_table), \
629 .ops = &twl4030ldo_ops, \
630 .type = REGULATOR_VOLTAGE, \
631 .owner = THIS_MODULE, \
635 #define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts, num) { \
638 .min_mV = min_mVolts, \
639 .max_mV = max_mVolts, \
642 .id = TWL6030_REG_##label, \
643 .n_voltages = (max_mVolts - min_mVolts)/100, \
644 .ops = &twl6030ldo_ops, \
645 .type = REGULATOR_VOLTAGE, \
646 .owner = THIS_MODULE, \
651 #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
652 family, operations) { \
656 .delay = turnon_delay, \
657 .remap = remap_conf, \
660 .id = family##_REG_##label, \
662 .ops = &operations, \
663 .type = REGULATOR_VOLTAGE, \
664 .owner = THIS_MODULE, \
668 #define TWL6030_FIXED_RESOURCE(label, offset, num, turnon_delay) { \
671 .delay = turnon_delay, \
674 .id = TWL6030_REG_##label, \
675 .ops = &twl6030_fixed_resource, \
676 .type = REGULATOR_VOLTAGE, \
677 .owner = THIS_MODULE, \
682 * We list regulators here if systems need some level of
683 * software control over them after boot.
685 static struct twlreg_info twl_regs[] = {
686 TWL4030_ADJUSTABLE_LDO(VAUX1, 0x17, 1, 100, 0x08),
687 TWL4030_ADJUSTABLE_LDO(VAUX2_4030, 0x1b, 2, 100, 0x08),
688 TWL4030_ADJUSTABLE_LDO(VAUX2, 0x1b, 2, 100, 0x08),
689 TWL4030_ADJUSTABLE_LDO(VAUX3, 0x1f, 3, 100, 0x08),
690 TWL4030_ADJUSTABLE_LDO(VAUX4, 0x23, 4, 100, 0x08),
691 TWL4030_ADJUSTABLE_LDO(VMMC1, 0x27, 5, 100, 0x08),
692 TWL4030_ADJUSTABLE_LDO(VMMC2, 0x2b, 6, 100, 0x08),
693 TWL4030_ADJUSTABLE_LDO(VPLL1, 0x2f, 7, 100, 0x00),
694 TWL4030_ADJUSTABLE_LDO(VPLL2, 0x33, 8, 100, 0x08),
695 TWL4030_ADJUSTABLE_LDO(VSIM, 0x37, 9, 100, 0x00),
696 TWL4030_ADJUSTABLE_LDO(VDAC, 0x3b, 10, 100, 0x08),
697 TWL4030_FIXED_LDO(VINTANA1, 0x3f, 1500, 11, 100, 0x08),
698 TWL4030_ADJUSTABLE_LDO(VINTANA2, 0x43, 12, 100, 0x08),
699 TWL4030_FIXED_LDO(VINTDIG, 0x47, 1500, 13, 100, 0x08),
700 TWL4030_ADJUSTABLE_LDO(VIO, 0x4b, 14, 1000, 0x08),
701 TWL4030_ADJUSTABLE_LDO(VDD1, 0x55, 15, 1000, 0x08),
702 TWL4030_ADJUSTABLE_LDO(VDD2, 0x63, 16, 1000, 0x08),
703 TWL4030_FIXED_LDO(VUSB1V5, 0x71, 1500, 17, 100, 0x08),
704 TWL4030_FIXED_LDO(VUSB1V8, 0x74, 1800, 18, 100, 0x08),
705 TWL4030_FIXED_LDO(VUSB3V1, 0x77, 3100, 19, 150, 0x08),
706 /* VUSBCP is managed *only* by the USB subchip */
708 /* 6030 REG with base as PMC Slave Misc : 0x0030 */
709 /* Turnon-delay and remap configuration values for 6030 are not
710 verified since the specification is not public */
711 TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1000, 3300, 1),
712 TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 1000, 3300, 2),
713 TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 1000, 3300, 3),
714 TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 1000, 3300, 4),
715 TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 1000, 3300, 5),
716 TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 1000, 3300, 7),
717 TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0),
718 TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0),
719 TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0),
720 TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0),
721 TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 48, 0),
724 static int __devinit twlreg_probe(struct platform_device *pdev)
727 struct twlreg_info *info;
728 struct regulator_init_data *initdata;
729 struct regulation_constraints *c;
730 struct regulator_dev *rdev;
732 for (i = 0, info = NULL; i < ARRAY_SIZE(twl_regs); i++) {
733 if (twl_regs[i].desc.id != pdev->id)
741 initdata = pdev->dev.platform_data;
745 /* Constrain board-specific capabilities according to what
746 * this driver and the chip itself can actually do.
748 c = &initdata->constraints;
749 c->valid_modes_mask &= REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY;
750 c->valid_ops_mask &= REGULATOR_CHANGE_VOLTAGE
751 | REGULATOR_CHANGE_MODE
752 | REGULATOR_CHANGE_STATUS;
754 case TWL4030_REG_VIO:
755 case TWL4030_REG_VDD1:
756 case TWL4030_REG_VDD2:
757 case TWL4030_REG_VPLL1:
758 case TWL4030_REG_VINTANA1:
759 case TWL4030_REG_VINTANA2:
760 case TWL4030_REG_VINTDIG:
767 rdev = regulator_register(&info->desc, &pdev->dev, initdata, info);
769 dev_err(&pdev->dev, "can't register %s, %ld\n",
770 info->desc.name, PTR_ERR(rdev));
771 return PTR_ERR(rdev);
773 platform_set_drvdata(pdev, rdev);
775 if (twl_class_is_4030())
776 twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP,
779 /* NOTE: many regulators support short-circuit IRQs (presentable
780 * as REGULATOR_OVER_CURRENT notifications?) configured via:
782 * - SC_DETECT1 (vintana2, vmmc1/2, vaux1/2/3/4)
783 * - SC_DETECT2 (vusb, vdac, vio, vdd1/2, vpll2)
790 static int __devexit twlreg_remove(struct platform_device *pdev)
792 regulator_unregister(platform_get_drvdata(pdev));
796 MODULE_ALIAS("platform:twl_reg");
798 static struct platform_driver twlreg_driver = {
799 .probe = twlreg_probe,
800 .remove = __devexit_p(twlreg_remove),
801 /* NOTE: short name, to work around driver model truncation of
802 * "twl_regulator.12" (and friends) to "twl_regulator.1".
804 .driver.name = "twl_reg",
805 .driver.owner = THIS_MODULE,
808 static int __init twlreg_init(void)
810 return platform_driver_register(&twlreg_driver);
812 subsys_initcall(twlreg_init);
814 static void __exit twlreg_exit(void)
816 platform_driver_unregister(&twlreg_driver);
818 module_exit(twlreg_exit)
820 MODULE_DESCRIPTION("TWL regulator driver");
821 MODULE_LICENSE("GPL");