]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/rtc/rtc-mxc.c
rtc: rtc-mxc: adapt to the new i.mx clock framework
[karo-tx-linux.git] / drivers / rtc / rtc-mxc.c
1 /*
2  * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
3  *
4  * The code contained herein is licensed under the GNU General Public
5  * License. You may obtain a copy of the GNU General Public License
6  * Version 2 or later at the following locations:
7  *
8  * http://www.opensource.org/licenses/gpl-license.html
9  * http://www.gnu.org/copyleft/gpl.html
10  */
11
12 #include <linux/io.h>
13 #include <linux/rtc.h>
14 #include <linux/module.h>
15 #include <linux/slab.h>
16 #include <linux/interrupt.h>
17 #include <linux/platform_device.h>
18 #include <linux/clk.h>
19
20 #include <mach/hardware.h>
21
22 #define RTC_INPUT_CLK_32768HZ   (0x00 << 5)
23 #define RTC_INPUT_CLK_32000HZ   (0x01 << 5)
24 #define RTC_INPUT_CLK_38400HZ   (0x02 << 5)
25
26 #define RTC_SW_BIT      (1 << 0)
27 #define RTC_ALM_BIT     (1 << 2)
28 #define RTC_1HZ_BIT     (1 << 4)
29 #define RTC_2HZ_BIT     (1 << 7)
30 #define RTC_SAM0_BIT    (1 << 8)
31 #define RTC_SAM1_BIT    (1 << 9)
32 #define RTC_SAM2_BIT    (1 << 10)
33 #define RTC_SAM3_BIT    (1 << 11)
34 #define RTC_SAM4_BIT    (1 << 12)
35 #define RTC_SAM5_BIT    (1 << 13)
36 #define RTC_SAM6_BIT    (1 << 14)
37 #define RTC_SAM7_BIT    (1 << 15)
38 #define PIT_ALL_ON      (RTC_2HZ_BIT | RTC_SAM0_BIT | RTC_SAM1_BIT | \
39                          RTC_SAM2_BIT | RTC_SAM3_BIT | RTC_SAM4_BIT | \
40                          RTC_SAM5_BIT | RTC_SAM6_BIT | RTC_SAM7_BIT)
41
42 #define RTC_ENABLE_BIT  (1 << 7)
43
44 #define MAX_PIE_NUM     9
45 #define MAX_PIE_FREQ    512
46 static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = {
47         { 2,            RTC_2HZ_BIT },
48         { 4,            RTC_SAM0_BIT },
49         { 8,            RTC_SAM1_BIT },
50         { 16,           RTC_SAM2_BIT },
51         { 32,           RTC_SAM3_BIT },
52         { 64,           RTC_SAM4_BIT },
53         { 128,          RTC_SAM5_BIT },
54         { 256,          RTC_SAM6_BIT },
55         { MAX_PIE_FREQ, RTC_SAM7_BIT },
56 };
57
58 #define MXC_RTC_TIME    0
59 #define MXC_RTC_ALARM   1
60
61 #define RTC_HOURMIN     0x00    /*  32bit rtc hour/min counter reg */
62 #define RTC_SECOND      0x04    /*  32bit rtc seconds counter reg */
63 #define RTC_ALRM_HM     0x08    /*  32bit rtc alarm hour/min reg */
64 #define RTC_ALRM_SEC    0x0C    /*  32bit rtc alarm seconds reg */
65 #define RTC_RTCCTL      0x10    /*  32bit rtc control reg */
66 #define RTC_RTCISR      0x14    /*  32bit rtc interrupt status reg */
67 #define RTC_RTCIENR     0x18    /*  32bit rtc interrupt enable reg */
68 #define RTC_STPWCH      0x1C    /*  32bit rtc stopwatch min reg */
69 #define RTC_DAYR        0x20    /*  32bit rtc days counter reg */
70 #define RTC_DAYALARM    0x24    /*  32bit rtc day alarm reg */
71 #define RTC_TEST1       0x28    /*  32bit rtc test reg 1 */
72 #define RTC_TEST2       0x2C    /*  32bit rtc test reg 2 */
73 #define RTC_TEST3       0x30    /*  32bit rtc test reg 3 */
74
75 struct rtc_plat_data {
76         struct rtc_device *rtc;
77         void __iomem *ioaddr;
78         int irq;
79         struct clk *clk;
80         struct rtc_time g_rtc_alarm;
81 };
82
83 /*
84  * This function is used to obtain the RTC time or the alarm value in
85  * second.
86  */
87 static u32 get_alarm_or_time(struct device *dev, int time_alarm)
88 {
89         struct platform_device *pdev = to_platform_device(dev);
90         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
91         void __iomem *ioaddr = pdata->ioaddr;
92         u32 day = 0, hr = 0, min = 0, sec = 0, hr_min = 0;
93
94         switch (time_alarm) {
95         case MXC_RTC_TIME:
96                 day = readw(ioaddr + RTC_DAYR);
97                 hr_min = readw(ioaddr + RTC_HOURMIN);
98                 sec = readw(ioaddr + RTC_SECOND);
99                 break;
100         case MXC_RTC_ALARM:
101                 day = readw(ioaddr + RTC_DAYALARM);
102                 hr_min = readw(ioaddr + RTC_ALRM_HM) & 0xffff;
103                 sec = readw(ioaddr + RTC_ALRM_SEC);
104                 break;
105         }
106
107         hr = hr_min >> 8;
108         min = hr_min & 0xff;
109
110         return (((day * 24 + hr) * 60) + min) * 60 + sec;
111 }
112
113 /*
114  * This function sets the RTC alarm value or the time value.
115  */
116 static void set_alarm_or_time(struct device *dev, int time_alarm, u32 time)
117 {
118         u32 day, hr, min, sec, temp;
119         struct platform_device *pdev = to_platform_device(dev);
120         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
121         void __iomem *ioaddr = pdata->ioaddr;
122
123         day = time / 86400;
124         time -= day * 86400;
125
126         /* time is within a day now */
127         hr = time / 3600;
128         time -= hr * 3600;
129
130         /* time is within an hour now */
131         min = time / 60;
132         sec = time - min * 60;
133
134         temp = (hr << 8) + min;
135
136         switch (time_alarm) {
137         case MXC_RTC_TIME:
138                 writew(day, ioaddr + RTC_DAYR);
139                 writew(sec, ioaddr + RTC_SECOND);
140                 writew(temp, ioaddr + RTC_HOURMIN);
141                 break;
142         case MXC_RTC_ALARM:
143                 writew(day, ioaddr + RTC_DAYALARM);
144                 writew(sec, ioaddr + RTC_ALRM_SEC);
145                 writew(temp, ioaddr + RTC_ALRM_HM);
146                 break;
147         }
148 }
149
150 /*
151  * This function updates the RTC alarm registers and then clears all the
152  * interrupt status bits.
153  */
154 static int rtc_update_alarm(struct device *dev, struct rtc_time *alrm)
155 {
156         struct rtc_time alarm_tm, now_tm;
157         unsigned long now, time;
158         struct platform_device *pdev = to_platform_device(dev);
159         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
160         void __iomem *ioaddr = pdata->ioaddr;
161
162         now = get_alarm_or_time(dev, MXC_RTC_TIME);
163         rtc_time_to_tm(now, &now_tm);
164         alarm_tm.tm_year = now_tm.tm_year;
165         alarm_tm.tm_mon = now_tm.tm_mon;
166         alarm_tm.tm_mday = now_tm.tm_mday;
167         alarm_tm.tm_hour = alrm->tm_hour;
168         alarm_tm.tm_min = alrm->tm_min;
169         alarm_tm.tm_sec = alrm->tm_sec;
170         rtc_tm_to_time(&alarm_tm, &time);
171
172         /* clear all the interrupt status bits */
173         writew(readw(ioaddr + RTC_RTCISR), ioaddr + RTC_RTCISR);
174         set_alarm_or_time(dev, MXC_RTC_ALARM, time);
175
176         return 0;
177 }
178
179 static void mxc_rtc_irq_enable(struct device *dev, unsigned int bit,
180                                 unsigned int enabled)
181 {
182         struct platform_device *pdev = to_platform_device(dev);
183         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
184         void __iomem *ioaddr = pdata->ioaddr;
185         u32 reg;
186
187         spin_lock_irq(&pdata->rtc->irq_lock);
188         reg = readw(ioaddr + RTC_RTCIENR);
189
190         if (enabled)
191                 reg |= bit;
192         else
193                 reg &= ~bit;
194
195         writew(reg, ioaddr + RTC_RTCIENR);
196         spin_unlock_irq(&pdata->rtc->irq_lock);
197 }
198
199 /* This function is the RTC interrupt service routine. */
200 static irqreturn_t mxc_rtc_interrupt(int irq, void *dev_id)
201 {
202         struct platform_device *pdev = dev_id;
203         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
204         void __iomem *ioaddr = pdata->ioaddr;
205         unsigned long flags;
206         u32 status;
207         u32 events = 0;
208
209         spin_lock_irqsave(&pdata->rtc->irq_lock, flags);
210         status = readw(ioaddr + RTC_RTCISR) & readw(ioaddr + RTC_RTCIENR);
211         /* clear interrupt sources */
212         writew(status, ioaddr + RTC_RTCISR);
213
214         /* update irq data & counter */
215         if (status & RTC_ALM_BIT) {
216                 events |= (RTC_AF | RTC_IRQF);
217                 /* RTC alarm should be one-shot */
218                 mxc_rtc_irq_enable(&pdev->dev, RTC_ALM_BIT, 0);
219         }
220
221         if (status & RTC_1HZ_BIT)
222                 events |= (RTC_UF | RTC_IRQF);
223
224         if (status & PIT_ALL_ON)
225                 events |= (RTC_PF | RTC_IRQF);
226
227         rtc_update_irq(pdata->rtc, 1, events);
228         spin_unlock_irqrestore(&pdata->rtc->irq_lock, flags);
229
230         return IRQ_HANDLED;
231 }
232
233 /*
234  * Clear all interrupts and release the IRQ
235  */
236 static void mxc_rtc_release(struct device *dev)
237 {
238         struct platform_device *pdev = to_platform_device(dev);
239         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
240         void __iomem *ioaddr = pdata->ioaddr;
241
242         spin_lock_irq(&pdata->rtc->irq_lock);
243
244         /* Disable all rtc interrupts */
245         writew(0, ioaddr + RTC_RTCIENR);
246
247         /* Clear all interrupt status */
248         writew(0xffffffff, ioaddr + RTC_RTCISR);
249
250         spin_unlock_irq(&pdata->rtc->irq_lock);
251 }
252
253 static int mxc_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
254 {
255         mxc_rtc_irq_enable(dev, RTC_ALM_BIT, enabled);
256         return 0;
257 }
258
259 /*
260  * This function reads the current RTC time into tm in Gregorian date.
261  */
262 static int mxc_rtc_read_time(struct device *dev, struct rtc_time *tm)
263 {
264         u32 val;
265
266         /* Avoid roll-over from reading the different registers */
267         do {
268                 val = get_alarm_or_time(dev, MXC_RTC_TIME);
269         } while (val != get_alarm_or_time(dev, MXC_RTC_TIME));
270
271         rtc_time_to_tm(val, tm);
272
273         return 0;
274 }
275
276 /*
277  * This function sets the internal RTC time based on tm in Gregorian date.
278  */
279 static int mxc_rtc_set_mmss(struct device *dev, unsigned long time)
280 {
281         /*
282          * TTC_DAYR register is 9-bit in MX1 SoC, save time and day of year only
283          */
284         if (cpu_is_mx1()) {
285                 struct rtc_time tm;
286
287                 rtc_time_to_tm(time, &tm);
288                 tm.tm_year = 70;
289                 rtc_tm_to_time(&tm, &time);
290         }
291
292         /* Avoid roll-over from reading the different registers */
293         do {
294                 set_alarm_or_time(dev, MXC_RTC_TIME, time);
295         } while (time != get_alarm_or_time(dev, MXC_RTC_TIME));
296
297         return 0;
298 }
299
300 /*
301  * This function reads the current alarm value into the passed in 'alrm'
302  * argument. It updates the alrm's pending field value based on the whether
303  * an alarm interrupt occurs or not.
304  */
305 static int mxc_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
306 {
307         struct platform_device *pdev = to_platform_device(dev);
308         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
309         void __iomem *ioaddr = pdata->ioaddr;
310
311         rtc_time_to_tm(get_alarm_or_time(dev, MXC_RTC_ALARM), &alrm->time);
312         alrm->pending = ((readw(ioaddr + RTC_RTCISR) & RTC_ALM_BIT)) ? 1 : 0;
313
314         return 0;
315 }
316
317 /*
318  * This function sets the RTC alarm based on passed in alrm.
319  */
320 static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
321 {
322         struct platform_device *pdev = to_platform_device(dev);
323         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
324         int ret;
325
326         ret = rtc_update_alarm(dev, &alrm->time);
327         if (ret)
328                 return ret;
329
330         memcpy(&pdata->g_rtc_alarm, &alrm->time, sizeof(struct rtc_time));
331         mxc_rtc_irq_enable(dev, RTC_ALM_BIT, alrm->enabled);
332
333         return 0;
334 }
335
336 /* RTC layer */
337 static struct rtc_class_ops mxc_rtc_ops = {
338         .release                = mxc_rtc_release,
339         .read_time              = mxc_rtc_read_time,
340         .set_mmss               = mxc_rtc_set_mmss,
341         .read_alarm             = mxc_rtc_read_alarm,
342         .set_alarm              = mxc_rtc_set_alarm,
343         .alarm_irq_enable       = mxc_rtc_alarm_irq_enable,
344 };
345
346 static int __init mxc_rtc_probe(struct platform_device *pdev)
347 {
348         struct resource *res;
349         struct rtc_device *rtc;
350         struct rtc_plat_data *pdata = NULL;
351         u32 reg;
352         unsigned long rate;
353         int ret;
354
355         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
356         if (!res)
357                 return -ENODEV;
358
359         pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
360         if (!pdata)
361                 return -ENOMEM;
362
363         if (!devm_request_mem_region(&pdev->dev, res->start,
364                                      resource_size(res), pdev->name))
365                 return -EBUSY;
366
367         pdata->ioaddr = devm_ioremap(&pdev->dev, res->start,
368                                      resource_size(res));
369
370         pdata->clk = devm_clk_get(&pdev->dev, NULL);
371         if (IS_ERR(pdata->clk)) {
372                 dev_err(&pdev->dev, "unable to get clock!\n");
373                 ret = PTR_ERR(pdata->clk);
374                 goto exit_free_pdata;
375         }
376
377         clk_prepare_enable(pdata->clk);
378         rate = clk_get_rate(pdata->clk);
379
380         if (rate == 32768)
381                 reg = RTC_INPUT_CLK_32768HZ;
382         else if (rate == 32000)
383                 reg = RTC_INPUT_CLK_32000HZ;
384         else if (rate == 38400)
385                 reg = RTC_INPUT_CLK_38400HZ;
386         else {
387                 dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
388                 ret = -EINVAL;
389                 goto exit_put_clk;
390         }
391
392         reg |= RTC_ENABLE_BIT;
393         writew(reg, (pdata->ioaddr + RTC_RTCCTL));
394         if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
395                 dev_err(&pdev->dev, "hardware module can't be enabled!\n");
396                 ret = -EIO;
397                 goto exit_put_clk;
398         }
399
400         platform_set_drvdata(pdev, pdata);
401
402         /* Configure and enable the RTC */
403         pdata->irq = platform_get_irq(pdev, 0);
404
405         if (pdata->irq >= 0 &&
406             devm_request_irq(&pdev->dev, pdata->irq, mxc_rtc_interrupt,
407                              IRQF_SHARED, pdev->name, pdev) < 0) {
408                 dev_warn(&pdev->dev, "interrupt not available.\n");
409                 pdata->irq = -1;
410         }
411
412         if (pdata->irq >=0)
413                 device_init_wakeup(&pdev->dev, 1);
414
415         rtc = rtc_device_register(pdev->name, &pdev->dev, &mxc_rtc_ops,
416                                   THIS_MODULE);
417         if (IS_ERR(rtc)) {
418                 ret = PTR_ERR(rtc);
419                 goto exit_clr_drvdata;
420         }
421
422         pdata->rtc = rtc;
423
424         return 0;
425
426 exit_clr_drvdata:
427         platform_set_drvdata(pdev, NULL);
428 exit_put_clk:
429         clk_disable_unprepare(pdata->clk);
430
431 exit_free_pdata:
432
433         return ret;
434 }
435
436 static int __exit mxc_rtc_remove(struct platform_device *pdev)
437 {
438         struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
439
440         rtc_device_unregister(pdata->rtc);
441
442         clk_disable_unprepare(pdata->clk);
443         platform_set_drvdata(pdev, NULL);
444
445         return 0;
446 }
447
448 #ifdef CONFIG_PM
449 static int mxc_rtc_suspend(struct device *dev)
450 {
451         struct rtc_plat_data *pdata = dev_get_drvdata(dev);
452
453         if (device_may_wakeup(dev))
454                 enable_irq_wake(pdata->irq);
455
456         return 0;
457 }
458
459 static int mxc_rtc_resume(struct device *dev)
460 {
461         struct rtc_plat_data *pdata = dev_get_drvdata(dev);
462
463         if (device_may_wakeup(dev))
464                 disable_irq_wake(pdata->irq);
465
466         return 0;
467 }
468
469 static struct dev_pm_ops mxc_rtc_pm_ops = {
470         .suspend        = mxc_rtc_suspend,
471         .resume         = mxc_rtc_resume,
472 };
473 #endif
474
475 static struct platform_driver mxc_rtc_driver = {
476         .driver = {
477                    .name        = "mxc_rtc",
478 #ifdef CONFIG_PM
479                    .pm          = &mxc_rtc_pm_ops,
480 #endif
481                    .owner       = THIS_MODULE,
482         },
483         .remove         = __exit_p(mxc_rtc_remove),
484 };
485
486 static int __init mxc_rtc_init(void)
487 {
488         return platform_driver_probe(&mxc_rtc_driver, mxc_rtc_probe);
489 }
490
491 static void __exit mxc_rtc_exit(void)
492 {
493         platform_driver_unregister(&mxc_rtc_driver);
494 }
495
496 module_init(mxc_rtc_init);
497 module_exit(mxc_rtc_exit);
498
499 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
500 MODULE_DESCRIPTION("RTC driver for Freescale MXC");
501 MODULE_LICENSE("GPL");
502