]> git.karo-electronics.de Git - karo-tx-linux.git/blob - drivers/scsi/isci/probe_roms.h
isci: fix oem parameter initialization and mode detection
[karo-tx-linux.git] / drivers / scsi / isci / probe_roms.h
1 /*
2  * This file is provided under a dual BSD/GPLv2 license.  When using or
3  * redistributing this file, you may do so under either license.
4  *
5  * GPL LICENSE SUMMARY
6  *
7  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of version 2 of the GNU General Public License as
11  * published by the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but
14  * WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
16  * General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21  * The full GNU General Public License is included in this distribution
22  * in the file called LICENSE.GPL.
23  *
24  * BSD LICENSE
25  *
26  * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27  * All rights reserved.
28  *
29  * Redistribution and use in source and binary forms, with or without
30  * modification, are permitted provided that the following conditions
31  * are met:
32  *
33  *   * Redistributions of source code must retain the above copyright
34  *     notice, this list of conditions and the following disclaimer.
35  *   * Redistributions in binary form must reproduce the above copyright
36  *     notice, this list of conditions and the following disclaimer in
37  *     the documentation and/or other materials provided with the
38  *     distribution.
39  *   * Neither the name of Intel Corporation nor the names of its
40  *     contributors may be used to endorse or promote products derived
41  *     from this software without specific prior written permission.
42  *
43  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54  */
55 #ifndef _ISCI_PROBE_ROMS_H_
56 #define _ISCI_PROBE_ROMS_H_
57
58 #ifdef __KERNEL__
59 #include <linux/firmware.h>
60 #include <linux/pci.h>
61
62 struct isci_orom *isci_request_oprom(struct pci_dev *pdev);
63
64 union scic_oem_parameters;
65 struct isci_orom;
66
67 enum sci_status isci_parse_oem_parameters(
68         union scic_oem_parameters *oem_params,
69         struct isci_orom *orom,
70         int scu_index);
71 struct isci_orom *isci_request_firmware(struct pci_dev *pdev, const struct firmware *fw);
72 struct isci_orom *isci_get_efi_var(struct pci_dev *pdev);
73
74 struct isci_oem_hdr {
75         u8 sig[4];
76         u8 rev_major;
77         u8 rev_minor;
78         u16 len;
79         u8 checksum;
80         u8 reserved1;
81         u16 reserved2;
82 } __attribute__ ((packed));
83
84 #else
85 #define SCI_MAX_PORTS 4
86 #define SCI_MAX_PHYS 4
87 #define SCI_MAX_CONTROLLERS 2
88 #endif
89
90 #define ISCI_FW_NAME            "isci/isci_firmware.bin"
91
92 #define ROMSIGNATURE            0xaa55
93
94 #define ISCI_OEM_SIG            "$OEM"
95 #define ISCI_OEM_SIG_SIZE       4
96 #define ISCI_ROM_SIG            "ISCUOEMB"
97 #define ISCI_ROM_SIG_SIZE       8
98
99 #define ISCI_PREBOOT_SOURCE_INIT     (0x00)
100 #define ISCI_PREBOOT_SOURCE_OROM     (0x80)
101 #define ISCI_PREBOOT_SOURCE_EFI      (0x81)
102
103 #define ISCI_EFI_VENDOR_GUID    \
104         EFI_GUID(0x193dfefa, 0xa445, 0x4302, 0x99, 0xd8, 0xef, 0x3a, 0xad, \
105                         0x1a, 0x04, 0xc6)
106 #define ISCI_EFI_ATTRIBUTES     0
107 #define ISCI_EFI_VAR_NAME       "RstScuO"
108
109 /* Allowed PORT configuration modes APC Automatic PORT configuration mode is
110  * defined by the OEM configuration parameters providing no PHY_MASK parameters
111  * for any PORT. i.e. There are no phys assigned to any of the ports at start.
112  * MPC Manual PORT configuration mode is defined by the OEM configuration
113  * parameters providing a PHY_MASK value for any PORT.  It is assumed that any
114  * PORT with no PHY_MASK is an invalid port and not all PHYs must be assigned.
115  * A PORT_PHY mask that assigns just a single PHY to a port and no other PHYs
116  * being assigned is sufficient to declare manual PORT configuration.
117  */
118 enum SCIC_PORT_CONFIGURATION_MODE {
119         SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE = 0,
120         SCIC_PORT_MANUAL_CONFIGURATION_MODE = 1
121 };
122
123 struct sci_bios_oem_param_block_hdr {
124         uint8_t signature[ISCI_ROM_SIG_SIZE];
125         uint16_t total_block_length;
126         uint8_t hdr_length;
127         uint8_t version;
128         uint8_t preboot_source;
129         uint8_t num_elements;
130         uint8_t element_length;
131         uint8_t reserved[8];
132 } __attribute__ ((packed));
133
134 struct scic_sds_oem_params {
135         struct {
136                 uint8_t mode_type;
137                 uint8_t max_concurrent_dev_spin_up;
138                 uint8_t do_enable_ssc;
139                 uint8_t reserved;
140         } controller;
141
142         struct {
143                 uint8_t phy_mask;
144         } ports[SCI_MAX_PORTS];
145
146         struct sci_phy_oem_params {
147                 struct {
148                         uint32_t high;
149                         uint32_t low;
150                 } sas_address;
151
152                 uint32_t afe_tx_amp_control0;
153                 uint32_t afe_tx_amp_control1;
154                 uint32_t afe_tx_amp_control2;
155                 uint32_t afe_tx_amp_control3;
156         } phys[SCI_MAX_PHYS];
157 } __attribute__ ((packed));
158
159 struct isci_orom {
160         struct sci_bios_oem_param_block_hdr hdr;
161         struct scic_sds_oem_params ctrl[SCI_MAX_CONTROLLERS];
162 } __attribute__ ((packed));
163
164 #endif