2 * This is the Fusion MPT base driver providing common API layer interface
3 * for access to MPT (Message Passing Technology) firmware.
5 * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
6 * Copyright (C) 2007-2010 LSI Corporation
7 * (mailto:DL-MPTFusionLinux@lsi.com)
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
20 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
21 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
22 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
23 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
24 * solely responsible for determining the appropriateness of using and
25 * distributing the Program and assumes all risks associated with its
26 * exercise of rights under this Agreement, including but not limited to
27 * the risks and costs of program errors, damage to or loss of data,
28 * programs or equipment, and unavailability or interruption of operations.
30 * DISCLAIMER OF LIABILITY
31 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
33 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
34 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
35 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
36 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
37 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39 * You should have received a copy of the GNU General Public License
40 * along with this program; if not, write to the Free Software
41 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
45 #include <linux/version.h>
46 #include <linux/kernel.h>
47 #include <linux/module.h>
48 #include <linux/errno.h>
49 #include <linux/init.h>
50 #include <linux/slab.h>
51 #include <linux/types.h>
52 #include <linux/pci.h>
53 #include <linux/kdev_t.h>
54 #include <linux/blkdev.h>
55 #include <linux/delay.h>
56 #include <linux/interrupt.h>
57 #include <linux/dma-mapping.h>
58 #include <linux/sort.h>
60 #include <linux/time.h>
61 #include <linux/aer.h>
63 #include "mpt2sas_base.h"
65 static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
67 #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
68 #define MPT2SAS_MAX_REQUEST_QUEUE 600 /* maximum controller queue depth */
70 static int max_queue_depth = -1;
71 module_param(max_queue_depth, int, 0);
72 MODULE_PARM_DESC(max_queue_depth, " max controller queue depth ");
74 static int max_sgl_entries = -1;
75 module_param(max_sgl_entries, int, 0);
76 MODULE_PARM_DESC(max_sgl_entries, " max sg entries ");
78 static int msix_disable = -1;
79 module_param(msix_disable, int, 0);
80 MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)");
82 /* diag_buffer_enable is bitwise
84 * bit 1 set = SNAPSHOT
85 * bit 2 set = EXTENDED
87 * Either bit can be set, or both
89 static int diag_buffer_enable;
90 module_param(diag_buffer_enable, int, 0);
91 MODULE_PARM_DESC(diag_buffer_enable, " post diag buffers "
92 "(TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
94 int mpt2sas_fwfault_debug;
95 MODULE_PARM_DESC(mpt2sas_fwfault_debug, " enable detection of firmware fault "
96 "and halt firmware - (default=0)");
98 static int disable_discovery = -1;
99 module_param(disable_discovery, int, 0);
100 MODULE_PARM_DESC(disable_discovery, " disable discovery ");
103 * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug.
107 _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp)
109 int ret = param_set_int(val, kp);
110 struct MPT2SAS_ADAPTER *ioc;
115 printk(KERN_INFO "setting fwfault_debug(%d)\n", mpt2sas_fwfault_debug);
116 list_for_each_entry(ioc, &mpt2sas_ioc_list, list)
117 ioc->fwfault_debug = mpt2sas_fwfault_debug;
120 module_param_call(mpt2sas_fwfault_debug, _scsih_set_fwfault_debug,
121 param_get_int, &mpt2sas_fwfault_debug, 0644);
124 * _base_fault_reset_work - workq handling ioc fault conditions
125 * @work: input argument, used to derive ioc
131 _base_fault_reset_work(struct work_struct *work)
133 struct MPT2SAS_ADAPTER *ioc =
134 container_of(work, struct MPT2SAS_ADAPTER, fault_reset_work.work);
139 spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
140 if (ioc->shost_recovery)
142 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
144 doorbell = mpt2sas_base_get_iocstate(ioc, 0);
145 if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
146 rc = mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
148 printk(MPT2SAS_WARN_FMT "%s: hard reset: %s\n", ioc->name,
149 __func__, (rc == 0) ? "success" : "failed");
150 doorbell = mpt2sas_base_get_iocstate(ioc, 0);
151 if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
152 mpt2sas_base_fault_info(ioc, doorbell &
153 MPI2_DOORBELL_DATA_MASK);
156 spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
158 if (ioc->fault_reset_work_q)
159 queue_delayed_work(ioc->fault_reset_work_q,
160 &ioc->fault_reset_work,
161 msecs_to_jiffies(FAULT_POLLING_INTERVAL));
162 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
166 * mpt2sas_base_start_watchdog - start the fault_reset_work_q
167 * @ioc: per adapter object
173 mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc)
177 if (ioc->fault_reset_work_q)
180 /* initialize fault polling */
181 INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work);
182 snprintf(ioc->fault_reset_work_q_name,
183 sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id);
184 ioc->fault_reset_work_q =
185 create_singlethread_workqueue(ioc->fault_reset_work_q_name);
186 if (!ioc->fault_reset_work_q) {
187 printk(MPT2SAS_ERR_FMT "%s: failed (line=%d)\n",
188 ioc->name, __func__, __LINE__);
191 spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
192 if (ioc->fault_reset_work_q)
193 queue_delayed_work(ioc->fault_reset_work_q,
194 &ioc->fault_reset_work,
195 msecs_to_jiffies(FAULT_POLLING_INTERVAL));
196 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
200 * mpt2sas_base_stop_watchdog - stop the fault_reset_work_q
201 * @ioc: per adapter object
207 mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc)
210 struct workqueue_struct *wq;
212 spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
213 wq = ioc->fault_reset_work_q;
214 ioc->fault_reset_work_q = NULL;
215 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
217 if (!cancel_delayed_work(&ioc->fault_reset_work))
219 destroy_workqueue(wq);
224 * mpt2sas_base_fault_info - verbose translation of firmware FAULT code
225 * @ioc: per adapter object
226 * @fault_code: fault code
231 mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code)
233 printk(MPT2SAS_ERR_FMT "fault_state(0x%04x)!\n",
234 ioc->name, fault_code);
238 * mpt2sas_halt_firmware - halt's mpt controller firmware
239 * @ioc: per adapter object
241 * For debugging timeout related issues. Writing 0xCOFFEE00
242 * to the doorbell register will halt controller firmware. With
243 * the purpose to stop both driver and firmware, the enduser can
244 * obtain a ring buffer from controller UART.
247 mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc)
251 if (!ioc->fwfault_debug)
256 doorbell = readl(&ioc->chip->Doorbell);
257 if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
258 mpt2sas_base_fault_info(ioc , doorbell);
260 writel(0xC0FFEE00, &ioc->chip->Doorbell);
261 printk(MPT2SAS_ERR_FMT "Firmware is halted due to command "
262 "timeout\n", ioc->name);
265 panic("panic in %s\n", __func__);
268 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
270 * _base_sas_ioc_info - verbose translation of the ioc status
271 * @ioc: per adapter object
272 * @mpi_reply: reply mf payload returned from firmware
273 * @request_hdr: request mf
278 _base_sas_ioc_info(struct MPT2SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply,
279 MPI2RequestHeader_t *request_hdr)
281 u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
285 char *func_str = NULL;
287 /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */
288 if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
289 request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
290 request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION)
293 if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
296 switch (ioc_status) {
298 /****************************************************************************
299 * Common IOCStatus values for all replies
300 ****************************************************************************/
302 case MPI2_IOCSTATUS_INVALID_FUNCTION:
303 desc = "invalid function";
305 case MPI2_IOCSTATUS_BUSY:
308 case MPI2_IOCSTATUS_INVALID_SGL:
309 desc = "invalid sgl";
311 case MPI2_IOCSTATUS_INTERNAL_ERROR:
312 desc = "internal error";
314 case MPI2_IOCSTATUS_INVALID_VPID:
315 desc = "invalid vpid";
317 case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
318 desc = "insufficient resources";
320 case MPI2_IOCSTATUS_INVALID_FIELD:
321 desc = "invalid field";
323 case MPI2_IOCSTATUS_INVALID_STATE:
324 desc = "invalid state";
326 case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED:
327 desc = "op state not supported";
330 /****************************************************************************
331 * Config IOCStatus values
332 ****************************************************************************/
334 case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION:
335 desc = "config invalid action";
337 case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE:
338 desc = "config invalid type";
340 case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE:
341 desc = "config invalid page";
343 case MPI2_IOCSTATUS_CONFIG_INVALID_DATA:
344 desc = "config invalid data";
346 case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS:
347 desc = "config no defaults";
349 case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT:
350 desc = "config cant commit";
353 /****************************************************************************
355 ****************************************************************************/
357 case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
358 case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
359 case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
360 case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
361 case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
362 case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
363 case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
364 case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
365 case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
366 case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
367 case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
368 case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
371 /****************************************************************************
372 * For use by SCSI Initiator and SCSI Target end-to-end data protection
373 ****************************************************************************/
375 case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
376 desc = "eedp guard error";
378 case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
379 desc = "eedp ref tag error";
381 case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
382 desc = "eedp app tag error";
385 /****************************************************************************
387 ****************************************************************************/
389 case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX:
390 desc = "target invalid io index";
392 case MPI2_IOCSTATUS_TARGET_ABORTED:
393 desc = "target aborted";
395 case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE:
396 desc = "target no conn retryable";
398 case MPI2_IOCSTATUS_TARGET_NO_CONNECTION:
399 desc = "target no connection";
401 case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH:
402 desc = "target xfer count mismatch";
404 case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR:
405 desc = "target data offset error";
407 case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA:
408 desc = "target too much write data";
410 case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT:
411 desc = "target iu too short";
413 case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT:
414 desc = "target ack nak timeout";
416 case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED:
417 desc = "target nak received";
420 /****************************************************************************
421 * Serial Attached SCSI values
422 ****************************************************************************/
424 case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED:
425 desc = "smp request failed";
427 case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN:
428 desc = "smp data overrun";
431 /****************************************************************************
432 * Diagnostic Buffer Post / Diagnostic Release values
433 ****************************************************************************/
435 case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED:
436 desc = "diagnostic released";
445 switch (request_hdr->Function) {
446 case MPI2_FUNCTION_CONFIG:
447 frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size;
448 func_str = "config_page";
450 case MPI2_FUNCTION_SCSI_TASK_MGMT:
451 frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t);
452 func_str = "task_mgmt";
454 case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
455 frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t);
456 func_str = "sas_iounit_ctl";
458 case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR:
459 frame_sz = sizeof(Mpi2SepRequest_t);
460 func_str = "enclosure";
462 case MPI2_FUNCTION_IOC_INIT:
463 frame_sz = sizeof(Mpi2IOCInitRequest_t);
464 func_str = "ioc_init";
466 case MPI2_FUNCTION_PORT_ENABLE:
467 frame_sz = sizeof(Mpi2PortEnableRequest_t);
468 func_str = "port_enable";
470 case MPI2_FUNCTION_SMP_PASSTHROUGH:
471 frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size;
472 func_str = "smp_passthru";
476 func_str = "unknown";
480 printk(MPT2SAS_WARN_FMT "ioc_status: %s(0x%04x), request(0x%p),"
481 " (%s)\n", ioc->name, desc, ioc_status, request_hdr, func_str);
483 _debug_dump_mf(request_hdr, frame_sz/4);
487 * _base_display_event_data - verbose translation of firmware asyn events
488 * @ioc: per adapter object
489 * @mpi_reply: reply mf payload returned from firmware
494 _base_display_event_data(struct MPT2SAS_ADAPTER *ioc,
495 Mpi2EventNotificationReply_t *mpi_reply)
500 if (!(ioc->logging_level & MPT_DEBUG_EVENTS))
503 event = le16_to_cpu(mpi_reply->Event);
506 case MPI2_EVENT_LOG_DATA:
509 case MPI2_EVENT_STATE_CHANGE:
510 desc = "Status Change";
512 case MPI2_EVENT_HARD_RESET_RECEIVED:
513 desc = "Hard Reset Received";
515 case MPI2_EVENT_EVENT_CHANGE:
516 desc = "Event Change";
518 case MPI2_EVENT_TASK_SET_FULL:
519 desc = "Task Set Full";
521 case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
522 desc = "Device Status Change";
524 case MPI2_EVENT_IR_OPERATION_STATUS:
525 desc = "IR Operation Status";
527 case MPI2_EVENT_SAS_DISCOVERY:
529 Mpi2EventDataSasDiscovery_t *event_data =
530 (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData;
531 printk(MPT2SAS_INFO_FMT "Discovery: (%s)", ioc->name,
532 (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
534 if (event_data->DiscoveryStatus)
535 printk("discovery_status(0x%08x)",
536 le32_to_cpu(event_data->DiscoveryStatus));
540 case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
541 desc = "SAS Broadcast Primitive";
543 case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
544 desc = "SAS Init Device Status Change";
546 case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW:
547 desc = "SAS Init Table Overflow";
549 case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
550 desc = "SAS Topology Change List";
552 case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
553 desc = "SAS Enclosure Device Status Change";
555 case MPI2_EVENT_IR_VOLUME:
558 case MPI2_EVENT_IR_PHYSICAL_DISK:
559 desc = "IR Physical Disk";
561 case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
562 desc = "IR Configuration Change List";
564 case MPI2_EVENT_LOG_ENTRY_ADDED:
565 desc = "Log Entry Added";
572 printk(MPT2SAS_INFO_FMT "%s\n", ioc->name, desc);
577 * _base_sas_log_info - verbose translation of firmware log info
578 * @ioc: per adapter object
579 * @log_info: log info
584 _base_sas_log_info(struct MPT2SAS_ADAPTER *ioc , u32 log_info)
595 union loginfo_type sas_loginfo;
596 char *originator_str = NULL;
598 sas_loginfo.loginfo = log_info;
599 if (sas_loginfo.dw.bus_type != 3 /*SAS*/)
602 /* each nexus loss loginfo */
603 if (log_info == 0x31170000)
606 /* eat the loginfos associated with task aborts */
607 if (ioc->ignore_loginfos && (log_info == 30050000 || log_info ==
608 0x31140000 || log_info == 0x31130000))
611 switch (sas_loginfo.dw.originator) {
613 originator_str = "IOP";
616 originator_str = "PL";
619 originator_str = "IR";
623 printk(MPT2SAS_WARN_FMT "log_info(0x%08x): originator(%s), "
624 "code(0x%02x), sub_code(0x%04x)\n", ioc->name, log_info,
625 originator_str, sas_loginfo.dw.code,
626 sas_loginfo.dw.subcode);
630 * _base_display_reply_info -
631 * @ioc: per adapter object
632 * @smid: system request message index
633 * @msix_index: MSIX table index supplied by the OS
634 * @reply: reply message frame(lower 32bit addr)
639 _base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
642 MPI2DefaultReply_t *mpi_reply;
645 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
646 ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
647 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
648 if ((ioc_status & MPI2_IOCSTATUS_MASK) &&
649 (ioc->logging_level & MPT_DEBUG_REPLY)) {
650 _base_sas_ioc_info(ioc , mpi_reply,
651 mpt2sas_base_get_msg_frame(ioc, smid));
654 if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
655 _base_sas_log_info(ioc, le32_to_cpu(mpi_reply->IOCLogInfo));
659 * mpt2sas_base_done - base internal command completion routine
660 * @ioc: per adapter object
661 * @smid: system request message index
662 * @msix_index: MSIX table index supplied by the OS
663 * @reply: reply message frame(lower 32bit addr)
665 * Return 1 meaning mf should be freed from _base_interrupt
666 * 0 means the mf is freed from this function.
669 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
672 MPI2DefaultReply_t *mpi_reply;
674 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
675 if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
678 if (ioc->base_cmds.status == MPT2_CMD_NOT_USED)
681 ioc->base_cmds.status |= MPT2_CMD_COMPLETE;
683 ioc->base_cmds.status |= MPT2_CMD_REPLY_VALID;
684 memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
686 ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
687 complete(&ioc->base_cmds.done);
692 * _base_async_event - main callback handler for firmware asyn events
693 * @ioc: per adapter object
694 * @msix_index: MSIX table index supplied by the OS
695 * @reply: reply message frame(lower 32bit addr)
697 * Return 1 meaning mf should be freed from _base_interrupt
698 * 0 means the mf is freed from this function.
701 _base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
703 Mpi2EventNotificationReply_t *mpi_reply;
704 Mpi2EventAckRequest_t *ack_request;
707 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
710 if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
712 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
713 _base_display_event_data(ioc, mpi_reply);
715 if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED))
717 smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
719 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
720 ioc->name, __func__);
724 ack_request = mpt2sas_base_get_msg_frame(ioc, smid);
725 memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
726 ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
727 ack_request->Event = mpi_reply->Event;
728 ack_request->EventContext = mpi_reply->EventContext;
729 ack_request->VF_ID = 0; /* TODO */
730 ack_request->VP_ID = 0;
731 mpt2sas_base_put_smid_default(ioc, smid);
735 /* scsih callback handler */
736 mpt2sas_scsih_event_callback(ioc, msix_index, reply);
738 /* ctl callback handler */
739 mpt2sas_ctl_event_callback(ioc, msix_index, reply);
745 * _base_get_cb_idx - obtain the callback index
746 * @ioc: per adapter object
747 * @smid: system request message index
749 * Return callback index.
752 _base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
757 if (smid >= ioc->hi_priority_smid) {
758 if (smid < ioc->internal_smid) {
759 i = smid - ioc->hi_priority_smid;
760 cb_idx = ioc->hpr_lookup[i].cb_idx;
762 i = smid - ioc->internal_smid;
763 cb_idx = ioc->internal_lookup[i].cb_idx;
767 cb_idx = ioc->scsi_lookup[i].cb_idx;
773 * _base_mask_interrupts - disable interrupts
774 * @ioc: per adapter object
776 * Disabling ResetIRQ, Reply and Doorbell Interrupts
781 _base_mask_interrupts(struct MPT2SAS_ADAPTER *ioc)
785 ioc->mask_interrupts = 1;
786 him_register = readl(&ioc->chip->HostInterruptMask);
787 him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
788 writel(him_register, &ioc->chip->HostInterruptMask);
789 readl(&ioc->chip->HostInterruptMask);
793 * _base_unmask_interrupts - enable interrupts
794 * @ioc: per adapter object
796 * Enabling only Reply Interrupts
801 _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
805 him_register = readl(&ioc->chip->HostInterruptMask);
806 him_register &= ~MPI2_HIM_RIM;
807 writel(him_register, &ioc->chip->HostInterruptMask);
808 ioc->mask_interrupts = 0;
811 union reply_descriptor {
820 * _base_interrupt - MPT adapter (IOC) specific interrupt handler.
821 * @irq: irq number (not used)
822 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
823 * @r: pt_regs pointer (not used)
825 * Return IRQ_HANDLE if processed, else IRQ_NONE.
828 _base_interrupt(int irq, void *bus_id)
830 union reply_descriptor rd;
832 u8 request_desript_type;
837 struct MPT2SAS_ADAPTER *ioc = bus_id;
838 Mpi2ReplyDescriptorsUnion_t *rpf;
841 if (ioc->mask_interrupts)
844 rpf = &ioc->reply_post_free[ioc->reply_post_host_index];
845 request_desript_type = rpf->Default.ReplyFlags
846 & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
847 if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
852 rd.word = rpf->Words;
853 if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
857 smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
858 msix_index = rpf->Default.MSIxIndex;
859 if (request_desript_type ==
860 MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
862 (rpf->AddressReply.ReplyFrameAddress);
863 } else if (request_desript_type ==
864 MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER)
866 else if (request_desript_type ==
867 MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
870 cb_idx = _base_get_cb_idx(ioc, smid);
871 if (smid && cb_idx != 0xFF) {
872 rc = mpt_callbacks[cb_idx](ioc, smid, msix_index,
875 _base_display_reply_info(ioc, smid, msix_index,
878 mpt2sas_base_free_smid(ioc, smid);
881 _base_async_event(ioc, msix_index, reply);
883 /* reply free queue handling */
885 ioc->reply_free_host_index =
886 (ioc->reply_free_host_index ==
887 (ioc->reply_free_queue_depth - 1)) ?
888 0 : ioc->reply_free_host_index + 1;
889 ioc->reply_free[ioc->reply_free_host_index] =
892 writel(ioc->reply_free_host_index,
893 &ioc->chip->ReplyFreeHostIndex);
898 rpf->Words = ULLONG_MAX;
899 ioc->reply_post_host_index = (ioc->reply_post_host_index ==
900 (ioc->reply_post_queue_depth - 1)) ? 0 :
901 ioc->reply_post_host_index + 1;
902 request_desript_type =
903 ioc->reply_post_free[ioc->reply_post_host_index].Default.
904 ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
906 if (request_desript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
908 if (!ioc->reply_post_host_index)
909 rpf = ioc->reply_post_free;
920 writel(ioc->reply_post_host_index, &ioc->chip->ReplyPostHostIndex);
925 * mpt2sas_base_release_callback_handler - clear interupt callback handler
926 * @cb_idx: callback index
931 mpt2sas_base_release_callback_handler(u8 cb_idx)
933 mpt_callbacks[cb_idx] = NULL;
937 * mpt2sas_base_register_callback_handler - obtain index for the interrupt callback handler
938 * @cb_func: callback function
943 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func)
947 for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--)
948 if (mpt_callbacks[cb_idx] == NULL)
951 mpt_callbacks[cb_idx] = cb_func;
956 * mpt2sas_base_initialize_callback_handler - initialize the interrupt callback handler
961 mpt2sas_base_initialize_callback_handler(void)
965 for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++)
966 mpt2sas_base_release_callback_handler(cb_idx);
970 * mpt2sas_base_build_zero_len_sge - build zero length sg entry
971 * @ioc: per adapter object
972 * @paddr: virtual address for SGE
974 * Create a zero length scatter gather entry to insure the IOCs hardware has
975 * something to use if the target device goes brain dead and tries
976 * to send data even when none is asked for.
981 mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr)
983 u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT |
984 MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST |
985 MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
986 MPI2_SGE_FLAGS_SHIFT);
987 ioc->base_add_sg_single(paddr, flags_length, -1);
991 * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr.
992 * @paddr: virtual address for SGE
993 * @flags_length: SGE flags and data transfer length
994 * @dma_addr: Physical address
999 _base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr)
1001 Mpi2SGESimple32_t *sgel = paddr;
1003 flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING |
1004 MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
1005 sgel->FlagsLength = cpu_to_le32(flags_length);
1006 sgel->Address = cpu_to_le32(dma_addr);
1011 * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr.
1012 * @paddr: virtual address for SGE
1013 * @flags_length: SGE flags and data transfer length
1014 * @dma_addr: Physical address
1019 _base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr)
1021 Mpi2SGESimple64_t *sgel = paddr;
1023 flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING |
1024 MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT;
1025 sgel->FlagsLength = cpu_to_le32(flags_length);
1026 sgel->Address = cpu_to_le64(dma_addr);
1029 #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10))
1032 * _base_config_dma_addressing - set dma addressing
1033 * @ioc: per adapter object
1034 * @pdev: PCI device struct
1036 * Returns 0 for success, non-zero for failure.
1039 _base_config_dma_addressing(struct MPT2SAS_ADAPTER *ioc, struct pci_dev *pdev)
1044 if (sizeof(dma_addr_t) > 4) {
1045 const uint64_t required_mask =
1046 dma_get_required_mask(&pdev->dev);
1047 if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
1048 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
1049 DMA_BIT_MASK(64))) {
1050 ioc->base_add_sg_single = &_base_add_sg_single_64;
1051 ioc->sge_size = sizeof(Mpi2SGESimple64_t);
1057 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1058 && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
1059 ioc->base_add_sg_single = &_base_add_sg_single_32;
1060 ioc->sge_size = sizeof(Mpi2SGESimple32_t);
1067 printk(MPT2SAS_INFO_FMT "%s BIT PCI BUS DMA ADDRESSING SUPPORTED, "
1068 "total mem (%ld kB)\n", ioc->name, desc, convert_to_kb(s.totalram));
1074 * _base_save_msix_table - backup msix vector table
1075 * @ioc: per adapter object
1077 * This address an errata where diag reset clears out the table
1080 _base_save_msix_table(struct MPT2SAS_ADAPTER *ioc)
1084 if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
1087 for (i = 0; i < ioc->msix_vector_count; i++)
1088 ioc->msix_table_backup[i] = ioc->msix_table[i];
1092 * _base_restore_msix_table - this restores the msix vector table
1093 * @ioc: per adapter object
1097 _base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc)
1101 if (!ioc->msix_enable || ioc->msix_table_backup == NULL)
1104 for (i = 0; i < ioc->msix_vector_count; i++)
1105 ioc->msix_table[i] = ioc->msix_table_backup[i];
1109 * _base_check_enable_msix - checks MSIX capabable.
1110 * @ioc: per adapter object
1112 * Check to see if card is capable of MSIX, and set number
1113 * of avaliable msix vectors
1116 _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
1119 u16 message_control;
1120 u32 msix_table_offset;
1122 base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX);
1124 dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not "
1125 "supported\n", ioc->name));
1129 /* get msix vector count */
1130 pci_read_config_word(ioc->pdev, base + 2, &message_control);
1131 ioc->msix_vector_count = (message_control & 0x3FF) + 1;
1133 /* get msix table */
1134 pci_read_config_dword(ioc->pdev, base + 4, &msix_table_offset);
1135 msix_table_offset &= 0xFFFFFFF8;
1136 ioc->msix_table = (u32 *)((void *)ioc->chip + msix_table_offset);
1138 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "msix is supported, "
1139 "vector_count(%d), table_offset(0x%08x), table(%p)\n", ioc->name,
1140 ioc->msix_vector_count, msix_table_offset, ioc->msix_table));
1145 * _base_disable_msix - disables msix
1146 * @ioc: per adapter object
1150 _base_disable_msix(struct MPT2SAS_ADAPTER *ioc)
1152 if (ioc->msix_enable) {
1153 pci_disable_msix(ioc->pdev);
1154 kfree(ioc->msix_table_backup);
1155 ioc->msix_table_backup = NULL;
1156 ioc->msix_enable = 0;
1161 * _base_enable_msix - enables msix, failback to io_apic
1162 * @ioc: per adapter object
1166 _base_enable_msix(struct MPT2SAS_ADAPTER *ioc)
1168 struct msix_entry entries;
1172 if (msix_disable == -1 || msix_disable == 0)
1178 if (_base_check_enable_msix(ioc) != 0)
1181 ioc->msix_table_backup = kcalloc(ioc->msix_vector_count,
1182 sizeof(u32), GFP_KERNEL);
1183 if (!ioc->msix_table_backup) {
1184 dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "allocation for "
1185 "msix_table_backup failed!!!\n", ioc->name));
1189 memset(&entries, 0, sizeof(struct msix_entry));
1190 r = pci_enable_msix(ioc->pdev, &entries, 1);
1192 dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "pci_enable_msix "
1193 "failed (r=%d) !!!\n", ioc->name, r));
1197 r = request_irq(entries.vector, _base_interrupt, IRQF_SHARED,
1200 dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "unable to allocate "
1201 "interrupt %d !!!\n", ioc->name, entries.vector));
1202 pci_disable_msix(ioc->pdev);
1206 ioc->pci_irq = entries.vector;
1207 ioc->msix_enable = 1;
1210 /* failback to io_apic interrupt routing */
1213 r = request_irq(ioc->pdev->irq, _base_interrupt, IRQF_SHARED,
1216 printk(MPT2SAS_ERR_FMT "unable to allocate interrupt %d!\n",
1217 ioc->name, ioc->pdev->irq);
1222 ioc->pci_irq = ioc->pdev->irq;
1230 * mpt2sas_base_map_resources - map in controller resources (io/irq/memap)
1231 * @ioc: per adapter object
1233 * Returns 0 for success, non-zero for failure.
1236 mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc)
1238 struct pci_dev *pdev = ioc->pdev;
1245 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n",
1246 ioc->name, __func__));
1248 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1249 if (pci_enable_device_mem(pdev)) {
1250 printk(MPT2SAS_WARN_FMT "pci_enable_device_mem: "
1251 "failed\n", ioc->name);
1256 if (pci_request_selected_regions(pdev, ioc->bars,
1257 MPT2SAS_DRIVER_NAME)) {
1258 printk(MPT2SAS_WARN_FMT "pci_request_selected_regions: "
1259 "failed\n", ioc->name);
1264 /* AER (Advanced Error Reporting) hooks */
1265 pci_enable_pcie_error_reporting(pdev);
1267 pci_set_master(pdev);
1269 if (_base_config_dma_addressing(ioc, pdev) != 0) {
1270 printk(MPT2SAS_WARN_FMT "no suitable DMA mask for %s\n",
1271 ioc->name, pci_name(pdev));
1276 for (i = 0, memap_sz = 0, pio_sz = 0 ; i < DEVICE_COUNT_RESOURCE; i++) {
1277 if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
1280 pio_chip = (u64)pci_resource_start(pdev, i);
1281 pio_sz = pci_resource_len(pdev, i);
1285 /* verify memory resource is valid before using */
1286 if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
1287 ioc->chip_phys = pci_resource_start(pdev, i);
1288 chip_phys = (u64)ioc->chip_phys;
1289 memap_sz = pci_resource_len(pdev, i);
1290 ioc->chip = ioremap(ioc->chip_phys, memap_sz);
1291 if (ioc->chip == NULL) {
1292 printk(MPT2SAS_ERR_FMT "unable to map "
1293 "adapter memory!\n", ioc->name);
1301 _base_mask_interrupts(ioc);
1302 r = _base_enable_msix(ioc);
1306 printk(MPT2SAS_INFO_FMT "%s: IRQ %d\n",
1307 ioc->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" :
1308 "IO-APIC enabled"), ioc->pci_irq);
1309 printk(MPT2SAS_INFO_FMT "iomem(0x%016llx), mapped(0x%p), size(%d)\n",
1310 ioc->name, (unsigned long long)chip_phys, ioc->chip, memap_sz);
1311 printk(MPT2SAS_INFO_FMT "ioport(0x%016llx), size(%d)\n",
1312 ioc->name, (unsigned long long)pio_chip, pio_sz);
1314 /* Save PCI configuration state for recovery from PCI AER/EEH errors */
1315 pci_save_state(pdev);
1324 pci_release_selected_regions(ioc->pdev, ioc->bars);
1325 pci_disable_pcie_error_reporting(pdev);
1326 pci_disable_device(pdev);
1331 * mpt2sas_base_get_msg_frame - obtain request mf pointer
1332 * @ioc: per adapter object
1333 * @smid: system request message index(smid zero is invalid)
1335 * Returns virt pointer to message frame.
1338 mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid)
1340 return (void *)(ioc->request + (smid * ioc->request_sz));
1344 * mpt2sas_base_get_sense_buffer - obtain a sense buffer assigned to a mf request
1345 * @ioc: per adapter object
1346 * @smid: system request message index
1348 * Returns virt pointer to sense buffer.
1351 mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid)
1353 return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
1357 * mpt2sas_base_get_sense_buffer_dma - obtain a sense buffer assigned to a mf request
1358 * @ioc: per adapter object
1359 * @smid: system request message index
1361 * Returns phys pointer to the low 32bit address of the sense buffer.
1364 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
1366 return cpu_to_le32(ioc->sense_dma +
1367 ((smid - 1) * SCSI_SENSE_BUFFERSIZE));
1371 * mpt2sas_base_get_reply_virt_addr - obtain reply frames virt address
1372 * @ioc: per adapter object
1373 * @phys_addr: lower 32 physical addr of the reply
1375 * Converts 32bit lower physical addr into a virt address.
1378 mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr)
1382 return ioc->reply + (phys_addr - (u32)ioc->reply_dma);
1386 * mpt2sas_base_get_smid - obtain a free smid from internal queue
1387 * @ioc: per adapter object
1388 * @cb_idx: callback index
1390 * Returns smid (zero is invalid)
1393 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
1395 unsigned long flags;
1396 struct request_tracker *request;
1399 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1400 if (list_empty(&ioc->internal_free_list)) {
1401 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1402 printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
1403 ioc->name, __func__);
1407 request = list_entry(ioc->internal_free_list.next,
1408 struct request_tracker, tracker_list);
1409 request->cb_idx = cb_idx;
1410 smid = request->smid;
1411 list_del(&request->tracker_list);
1412 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1417 * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
1418 * @ioc: per adapter object
1419 * @cb_idx: callback index
1420 * @scmd: pointer to scsi command object
1422 * Returns smid (zero is invalid)
1425 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
1426 struct scsi_cmnd *scmd)
1428 unsigned long flags;
1429 struct request_tracker *request;
1432 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1433 if (list_empty(&ioc->free_list)) {
1434 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1435 printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
1436 ioc->name, __func__);
1440 request = list_entry(ioc->free_list.next,
1441 struct request_tracker, tracker_list);
1442 request->scmd = scmd;
1443 request->cb_idx = cb_idx;
1444 smid = request->smid;
1445 list_del(&request->tracker_list);
1446 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1451 * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
1452 * @ioc: per adapter object
1453 * @cb_idx: callback index
1455 * Returns smid (zero is invalid)
1458 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
1460 unsigned long flags;
1461 struct request_tracker *request;
1464 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1465 if (list_empty(&ioc->hpr_free_list)) {
1466 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1470 request = list_entry(ioc->hpr_free_list.next,
1471 struct request_tracker, tracker_list);
1472 request->cb_idx = cb_idx;
1473 smid = request->smid;
1474 list_del(&request->tracker_list);
1475 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1481 * mpt2sas_base_free_smid - put smid back on free_list
1482 * @ioc: per adapter object
1483 * @smid: system request message index
1488 mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
1490 unsigned long flags;
1493 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1494 if (smid >= ioc->hi_priority_smid) {
1495 if (smid < ioc->internal_smid) {
1497 i = smid - ioc->hi_priority_smid;
1498 ioc->hpr_lookup[i].cb_idx = 0xFF;
1499 list_add_tail(&ioc->hpr_lookup[i].tracker_list,
1500 &ioc->hpr_free_list);
1502 /* internal queue */
1503 i = smid - ioc->internal_smid;
1504 ioc->internal_lookup[i].cb_idx = 0xFF;
1505 list_add_tail(&ioc->internal_lookup[i].tracker_list,
1506 &ioc->internal_free_list);
1508 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1514 ioc->scsi_lookup[i].cb_idx = 0xFF;
1515 ioc->scsi_lookup[i].scmd = NULL;
1516 list_add_tail(&ioc->scsi_lookup[i].tracker_list,
1518 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1521 * See _wait_for_commands_to_complete() call with regards to this code.
1523 if (ioc->shost_recovery && ioc->pending_io_count) {
1524 if (ioc->pending_io_count == 1)
1525 wake_up(&ioc->reset_wq);
1526 ioc->pending_io_count--;
1531 * _base_writeq - 64 bit write to MMIO
1532 * @ioc: per adapter object
1534 * @addr: address in MMIO space
1535 * @writeq_lock: spin lock
1537 * Glue for handling an atomic 64 bit word to MMIO. This special handling takes
1538 * care of 32 bit environment where its not quarenteed to send the entire word
1542 static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
1543 spinlock_t *writeq_lock)
1545 unsigned long flags;
1546 __u64 data_out = cpu_to_le64(b);
1548 spin_lock_irqsave(writeq_lock, flags);
1549 writel((u32)(data_out), addr);
1550 writel((u32)(data_out >> 32), (addr + 4));
1551 spin_unlock_irqrestore(writeq_lock, flags);
1554 static inline void _base_writeq(__u64 b, volatile void __iomem *addr,
1555 spinlock_t *writeq_lock)
1557 writeq(cpu_to_le64(b), addr);
1562 * mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
1563 * @ioc: per adapter object
1564 * @smid: system request message index
1565 * @handle: device handle
1570 mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
1572 Mpi2RequestDescriptorUnion_t descriptor;
1573 u64 *request = (u64 *)&descriptor;
1576 descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
1577 descriptor.SCSIIO.MSIxIndex = 0; /* TODO */
1578 descriptor.SCSIIO.SMID = cpu_to_le16(smid);
1579 descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
1580 descriptor.SCSIIO.LMID = 0;
1581 _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
1582 &ioc->scsi_lookup_lock);
1587 * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
1588 * @ioc: per adapter object
1589 * @smid: system request message index
1594 mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid)
1596 Mpi2RequestDescriptorUnion_t descriptor;
1597 u64 *request = (u64 *)&descriptor;
1599 descriptor.HighPriority.RequestFlags =
1600 MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
1601 descriptor.HighPriority.MSIxIndex = 0; /* TODO */
1602 descriptor.HighPriority.SMID = cpu_to_le16(smid);
1603 descriptor.HighPriority.LMID = 0;
1604 descriptor.HighPriority.Reserved1 = 0;
1605 _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
1606 &ioc->scsi_lookup_lock);
1610 * mpt2sas_base_put_smid_default - Default, primarily used for config pages
1611 * @ioc: per adapter object
1612 * @smid: system request message index
1617 mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid)
1619 Mpi2RequestDescriptorUnion_t descriptor;
1620 u64 *request = (u64 *)&descriptor;
1622 descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
1623 descriptor.Default.MSIxIndex = 0; /* TODO */
1624 descriptor.Default.SMID = cpu_to_le16(smid);
1625 descriptor.Default.LMID = 0;
1626 descriptor.Default.DescriptorTypeDependent = 0;
1627 _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
1628 &ioc->scsi_lookup_lock);
1632 * mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
1633 * @ioc: per adapter object
1634 * @smid: system request message index
1635 * @io_index: value used to track the IO
1640 mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
1643 Mpi2RequestDescriptorUnion_t descriptor;
1644 u64 *request = (u64 *)&descriptor;
1646 descriptor.SCSITarget.RequestFlags =
1647 MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
1648 descriptor.SCSITarget.MSIxIndex = 0; /* TODO */
1649 descriptor.SCSITarget.SMID = cpu_to_le16(smid);
1650 descriptor.SCSITarget.LMID = 0;
1651 descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
1652 _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow,
1653 &ioc->scsi_lookup_lock);
1657 * _base_display_dell_branding - Disply branding string
1658 * @ioc: per adapter object
1663 _base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
1665 char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
1667 if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
1670 memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
1671 switch (ioc->pdev->subsystem_device) {
1672 case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
1673 strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
1674 MPT2SAS_DELL_BRANDING_SIZE - 1);
1676 case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
1677 strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
1678 MPT2SAS_DELL_BRANDING_SIZE - 1);
1680 case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
1681 strncpy(dell_branding,
1682 MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
1683 MPT2SAS_DELL_BRANDING_SIZE - 1);
1685 case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
1686 strncpy(dell_branding,
1687 MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
1688 MPT2SAS_DELL_BRANDING_SIZE - 1);
1690 case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
1691 strncpy(dell_branding,
1692 MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
1693 MPT2SAS_DELL_BRANDING_SIZE - 1);
1695 case MPT2SAS_DELL_PERC_H200_SSDID:
1696 strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
1697 MPT2SAS_DELL_BRANDING_SIZE - 1);
1699 case MPT2SAS_DELL_6GBPS_SAS_SSDID:
1700 strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
1701 MPT2SAS_DELL_BRANDING_SIZE - 1);
1704 sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
1708 printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
1709 " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
1710 ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
1711 ioc->pdev->subsystem_device);
1715 * _base_display_ioc_capabilities - Disply IOC's capabilities.
1716 * @ioc: per adapter object
1721 _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
1726 u32 iounit_pg1_flags;
1728 pci_read_config_byte(ioc->pdev, PCI_CLASS_REVISION, &revision);
1729 strncpy(desc, ioc->manu_pg0.ChipName, 16);
1730 printk(MPT2SAS_INFO_FMT "%s: FWVersion(%02d.%02d.%02d.%02d), "
1731 "ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n",
1733 (ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
1734 (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
1735 (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
1736 ioc->facts.FWVersion.Word & 0x000000FF,
1738 (ioc->bios_pg3.BiosVersion & 0xFF000000) >> 24,
1739 (ioc->bios_pg3.BiosVersion & 0x00FF0000) >> 16,
1740 (ioc->bios_pg3.BiosVersion & 0x0000FF00) >> 8,
1741 ioc->bios_pg3.BiosVersion & 0x000000FF);
1743 _base_display_dell_branding(ioc);
1745 printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name);
1747 if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) {
1748 printk("Initiator");
1752 if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) {
1753 printk("%sTarget", i ? "," : "");
1759 printk("Capabilities=(");
1761 if (ioc->facts.IOCCapabilities &
1762 MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) {
1767 if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) {
1768 printk("%sTLR", i ? "," : "");
1772 if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) {
1773 printk("%sMulticast", i ? "," : "");
1777 if (ioc->facts.IOCCapabilities &
1778 MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) {
1779 printk("%sBIDI Target", i ? "," : "");
1783 if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) {
1784 printk("%sEEDP", i ? "," : "");
1788 if (ioc->facts.IOCCapabilities &
1789 MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) {
1790 printk("%sSnapshot Buffer", i ? "," : "");
1794 if (ioc->facts.IOCCapabilities &
1795 MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) {
1796 printk("%sDiag Trace Buffer", i ? "," : "");
1800 if (ioc->facts.IOCCapabilities &
1801 MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) {
1802 printk(KERN_INFO "%sDiag Extended Buffer", i ? "," : "");
1806 if (ioc->facts.IOCCapabilities &
1807 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) {
1808 printk("%sTask Set Full", i ? "," : "");
1812 iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
1813 if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) {
1814 printk("%sNCQ", i ? "," : "");
1822 * _base_static_config_pages - static start of day config pages
1823 * @ioc: per adapter object
1828 _base_static_config_pages(struct MPT2SAS_ADAPTER *ioc)
1830 Mpi2ConfigReply_t mpi_reply;
1831 u32 iounit_pg1_flags;
1833 mpt2sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0);
1834 if (ioc->ir_firmware)
1835 mpt2sas_config_get_manufacturing_pg10(ioc, &mpi_reply,
1837 mpt2sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2);
1838 mpt2sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3);
1839 mpt2sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8);
1840 mpt2sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0);
1841 mpt2sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
1842 _base_display_ioc_capabilities(ioc);
1845 * Enable task_set_full handling in iounit_pg1 when the
1846 * facts capabilities indicate that its supported.
1848 iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags);
1849 if ((ioc->facts.IOCCapabilities &
1850 MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING))
1852 ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
1855 MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING;
1856 ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags);
1857 mpt2sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1);
1861 * _base_release_memory_pools - release memory
1862 * @ioc: per adapter object
1864 * Free memory allocated from _base_allocate_memory_pools.
1869 _base_release_memory_pools(struct MPT2SAS_ADAPTER *ioc)
1871 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
1875 pci_free_consistent(ioc->pdev, ioc->request_dma_sz,
1876 ioc->request, ioc->request_dma);
1877 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "request_pool(0x%p)"
1878 ": free\n", ioc->name, ioc->request));
1879 ioc->request = NULL;
1883 pci_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma);
1884 if (ioc->sense_dma_pool)
1885 pci_pool_destroy(ioc->sense_dma_pool);
1886 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_pool(0x%p)"
1887 ": free\n", ioc->name, ioc->sense));
1892 pci_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma);
1893 if (ioc->reply_dma_pool)
1894 pci_pool_destroy(ioc->reply_dma_pool);
1895 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_pool(0x%p)"
1896 ": free\n", ioc->name, ioc->reply));
1900 if (ioc->reply_free) {
1901 pci_pool_free(ioc->reply_free_dma_pool, ioc->reply_free,
1902 ioc->reply_free_dma);
1903 if (ioc->reply_free_dma_pool)
1904 pci_pool_destroy(ioc->reply_free_dma_pool);
1905 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_pool"
1906 "(0x%p): free\n", ioc->name, ioc->reply_free));
1907 ioc->reply_free = NULL;
1910 if (ioc->reply_post_free) {
1911 pci_pool_free(ioc->reply_post_free_dma_pool,
1912 ioc->reply_post_free, ioc->reply_post_free_dma);
1913 if (ioc->reply_post_free_dma_pool)
1914 pci_pool_destroy(ioc->reply_post_free_dma_pool);
1915 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
1916 "reply_post_free_pool(0x%p): free\n", ioc->name,
1917 ioc->reply_post_free));
1918 ioc->reply_post_free = NULL;
1921 if (ioc->config_page) {
1922 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT
1923 "config_page(0x%p): free\n", ioc->name,
1925 pci_free_consistent(ioc->pdev, ioc->config_page_sz,
1926 ioc->config_page, ioc->config_page_dma);
1929 if (ioc->scsi_lookup) {
1930 free_pages((ulong)ioc->scsi_lookup, ioc->scsi_lookup_pages);
1931 ioc->scsi_lookup = NULL;
1933 kfree(ioc->hpr_lookup);
1934 kfree(ioc->internal_lookup);
1939 * _base_allocate_memory_pools - allocate start of day memory pools
1940 * @ioc: per adapter object
1941 * @sleep_flag: CAN_SLEEP or NO_SLEEP
1943 * Returns 0 success, anything else error
1946 _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
1948 Mpi2IOCFactsReply_t *facts;
1949 u32 queue_size, queue_diff;
1950 u16 max_sge_elements;
1951 u16 num_of_reply_frames;
1952 u16 chains_needed_per_io;
1955 u16 max_request_credit;
1957 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
1961 facts = &ioc->facts;
1963 /* command line tunables for max sgl entries */
1964 if (max_sgl_entries != -1) {
1965 ioc->shost->sg_tablesize = (max_sgl_entries <
1966 MPT2SAS_SG_DEPTH) ? max_sgl_entries :
1969 ioc->shost->sg_tablesize = MPT2SAS_SG_DEPTH;
1972 /* command line tunables for max controller queue depth */
1973 if (max_queue_depth != -1) {
1974 max_request_credit = (max_queue_depth < facts->RequestCredit)
1975 ? max_queue_depth : facts->RequestCredit;
1977 max_request_credit = (facts->RequestCredit >
1978 MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE :
1979 facts->RequestCredit;
1982 ioc->hba_queue_depth = max_request_credit;
1983 ioc->hi_priority_depth = facts->HighPriorityCredit;
1984 ioc->internal_depth = ioc->hi_priority_depth + 5;
1986 /* request frame size */
1987 ioc->request_sz = facts->IOCRequestFrameSize * 4;
1989 /* reply frame size */
1990 ioc->reply_sz = facts->ReplyFrameSize * 4;
1994 /* calculate number of sg elements left over in the 1st frame */
1995 max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) -
1996 sizeof(Mpi2SGEIOUnion_t)) + ioc->sge_size);
1997 ioc->max_sges_in_main_message = max_sge_elements/ioc->sge_size;
1999 /* now do the same for a chain buffer */
2000 max_sge_elements = ioc->request_sz - ioc->sge_size;
2001 ioc->max_sges_in_chain_message = max_sge_elements/ioc->sge_size;
2003 ioc->chain_offset_value_for_main_message =
2004 ((sizeof(Mpi2SCSIIORequest_t) - sizeof(Mpi2SGEIOUnion_t)) +
2005 (ioc->max_sges_in_chain_message * ioc->sge_size)) / 4;
2008 * MPT2SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE
2010 chains_needed_per_io = ((ioc->shost->sg_tablesize -
2011 ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message)
2013 if (chains_needed_per_io > facts->MaxChainDepth) {
2014 chains_needed_per_io = facts->MaxChainDepth;
2015 ioc->shost->sg_tablesize = min_t(u16,
2016 ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message
2017 * chains_needed_per_io), ioc->shost->sg_tablesize);
2019 ioc->chains_needed_per_io = chains_needed_per_io;
2021 /* reply free queue sizing - taking into account for events */
2022 num_of_reply_frames = ioc->hba_queue_depth + 32;
2024 /* number of replies frames can't be a multiple of 16 */
2025 /* decrease number of reply frames by 1 */
2026 if (!(num_of_reply_frames % 16))
2027 num_of_reply_frames--;
2029 /* calculate number of reply free queue entries
2030 * (must be multiple of 16)
2033 /* (we know reply_free_queue_depth is not a multiple of 16) */
2034 queue_size = num_of_reply_frames;
2035 queue_size += 16 - (queue_size % 16);
2036 ioc->reply_free_queue_depth = queue_size;
2038 /* reply descriptor post queue sizing */
2039 /* this size should be the number of request frames + number of reply
2043 queue_size = ioc->hba_queue_depth + num_of_reply_frames + 1;
2044 /* round up to 16 byte boundary */
2045 if (queue_size % 16)
2046 queue_size += 16 - (queue_size % 16);
2048 /* check against IOC maximum reply post queue depth */
2049 if (queue_size > facts->MaxReplyDescriptorPostQueueDepth) {
2050 queue_diff = queue_size -
2051 facts->MaxReplyDescriptorPostQueueDepth;
2053 /* round queue_diff up to multiple of 16 */
2054 if (queue_diff % 16)
2055 queue_diff += 16 - (queue_diff % 16);
2057 /* adjust hba_queue_depth, reply_free_queue_depth,
2060 ioc->hba_queue_depth -= queue_diff;
2061 ioc->reply_free_queue_depth -= queue_diff;
2062 queue_size -= queue_diff;
2064 ioc->reply_post_queue_depth = queue_size;
2066 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
2067 "sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
2068 "chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
2069 ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
2070 ioc->chains_needed_per_io));
2072 ioc->scsiio_depth = ioc->hba_queue_depth -
2073 ioc->hi_priority_depth - ioc->internal_depth;
2075 /* set the scsi host can_queue depth
2076 * with some internal commands that could be outstanding
2078 ioc->shost->can_queue = ioc->scsiio_depth - (2);
2079 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
2080 "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
2082 /* contiguous pool for request and chains, 16 byte align, one extra "
2085 ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
2086 sz = ((ioc->scsiio_depth + 1 + ioc->chain_depth) * ioc->request_sz);
2088 /* hi-priority queue */
2089 sz += (ioc->hi_priority_depth * ioc->request_sz);
2091 /* internal queue */
2092 sz += (ioc->internal_depth * ioc->request_sz);
2094 ioc->request_dma_sz = sz;
2095 ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
2096 if (!ioc->request) {
2097 printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
2098 "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2099 "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
2100 ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
2101 if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH)
2104 ioc->hba_queue_depth = max_request_credit - retry_sz;
2105 goto retry_allocation;
2109 printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
2110 "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
2111 "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
2112 ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
2115 /* hi-priority queue */
2116 ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
2118 ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
2121 /* internal queue */
2122 ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
2124 ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
2127 ioc->chain = ioc->internal + (ioc->internal_depth *
2129 ioc->chain_dma = ioc->internal_dma + (ioc->internal_depth *
2132 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
2133 "depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
2134 ioc->request, ioc->hba_queue_depth, ioc->request_sz,
2135 (ioc->hba_queue_depth * ioc->request_sz)/1024));
2136 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth"
2137 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain,
2138 ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
2139 ioc->request_sz))/1024));
2140 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool: dma(0x%llx)\n",
2141 ioc->name, (unsigned long long) ioc->request_dma));
2144 sz = ioc->scsiio_depth * sizeof(struct request_tracker);
2145 ioc->scsi_lookup_pages = get_order(sz);
2146 ioc->scsi_lookup = (struct request_tracker *)__get_free_pages(
2147 GFP_KERNEL, ioc->scsi_lookup_pages);
2148 if (!ioc->scsi_lookup) {
2149 printk(MPT2SAS_ERR_FMT "scsi_lookup: get_free_pages failed, "
2150 "sz(%d)\n", ioc->name, (int)sz);
2154 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): "
2155 "depth(%d)\n", ioc->name, ioc->request,
2156 ioc->scsiio_depth));
2158 /* initialize hi-priority queue smid's */
2159 ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
2160 sizeof(struct request_tracker), GFP_KERNEL);
2161 if (!ioc->hpr_lookup) {
2162 printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n",
2166 ioc->hi_priority_smid = ioc->scsiio_depth + 1;
2167 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): "
2168 "depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority,
2169 ioc->hi_priority_depth, ioc->hi_priority_smid));
2171 /* initialize internal queue smid's */
2172 ioc->internal_lookup = kcalloc(ioc->internal_depth,
2173 sizeof(struct request_tracker), GFP_KERNEL);
2174 if (!ioc->internal_lookup) {
2175 printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n",
2179 ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
2180 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): "
2181 "depth(%d), start smid(%d)\n", ioc->name, ioc->internal,
2182 ioc->internal_depth, ioc->internal_smid));
2184 /* sense buffers, 4 byte align */
2185 sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
2186 ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
2188 if (!ioc->sense_dma_pool) {
2189 printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_create failed\n",
2193 ioc->sense = pci_pool_alloc(ioc->sense_dma_pool , GFP_KERNEL,
2196 printk(MPT2SAS_ERR_FMT "sense pool: pci_pool_alloc failed\n",
2200 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
2201 "sense pool(0x%p): depth(%d), element_size(%d), pool_size"
2202 "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
2203 SCSI_SENSE_BUFFERSIZE, sz/1024));
2204 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n",
2205 ioc->name, (unsigned long long)ioc->sense_dma));
2208 /* reply pool, 4 byte align */
2209 sz = ioc->reply_free_queue_depth * ioc->reply_sz;
2210 ioc->reply_dma_pool = pci_pool_create("reply pool", ioc->pdev, sz, 4,
2212 if (!ioc->reply_dma_pool) {
2213 printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_create failed\n",
2217 ioc->reply = pci_pool_alloc(ioc->reply_dma_pool , GFP_KERNEL,
2220 printk(MPT2SAS_ERR_FMT "reply pool: pci_pool_alloc failed\n",
2224 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply pool(0x%p): depth"
2225 "(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->reply,
2226 ioc->reply_free_queue_depth, ioc->reply_sz, sz/1024));
2227 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_dma(0x%llx)\n",
2228 ioc->name, (unsigned long long)ioc->reply_dma));
2231 /* reply free queue, 16 byte align */
2232 sz = ioc->reply_free_queue_depth * 4;
2233 ioc->reply_free_dma_pool = pci_pool_create("reply_free pool",
2234 ioc->pdev, sz, 16, 0);
2235 if (!ioc->reply_free_dma_pool) {
2236 printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_create "
2237 "failed\n", ioc->name);
2240 ioc->reply_free = pci_pool_alloc(ioc->reply_free_dma_pool , GFP_KERNEL,
2241 &ioc->reply_free_dma);
2242 if (!ioc->reply_free) {
2243 printk(MPT2SAS_ERR_FMT "reply_free pool: pci_pool_alloc "
2244 "failed\n", ioc->name);
2247 memset(ioc->reply_free, 0, sz);
2248 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free pool(0x%p): "
2249 "depth(%d), element_size(%d), pool_size(%d kB)\n", ioc->name,
2250 ioc->reply_free, ioc->reply_free_queue_depth, 4, sz/1024));
2251 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_free_dma"
2252 "(0x%llx)\n", ioc->name, (unsigned long long)ioc->reply_free_dma));
2255 /* reply post queue, 16 byte align */
2256 sz = ioc->reply_post_queue_depth * sizeof(Mpi2DefaultReplyDescriptor_t);
2257 ioc->reply_post_free_dma_pool = pci_pool_create("reply_post_free pool",
2258 ioc->pdev, sz, 16, 0);
2259 if (!ioc->reply_post_free_dma_pool) {
2260 printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_create "
2261 "failed\n", ioc->name);
2264 ioc->reply_post_free = pci_pool_alloc(ioc->reply_post_free_dma_pool ,
2265 GFP_KERNEL, &ioc->reply_post_free_dma);
2266 if (!ioc->reply_post_free) {
2267 printk(MPT2SAS_ERR_FMT "reply_post_free pool: pci_pool_alloc "
2268 "failed\n", ioc->name);
2271 memset(ioc->reply_post_free, 0, sz);
2272 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply post free pool"
2273 "(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n",
2274 ioc->name, ioc->reply_post_free, ioc->reply_post_queue_depth, 8,
2276 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "reply_post_free_dma = "
2277 "(0x%llx)\n", ioc->name, (unsigned long long)
2278 ioc->reply_post_free_dma));
2281 ioc->config_page_sz = 512;
2282 ioc->config_page = pci_alloc_consistent(ioc->pdev,
2283 ioc->config_page_sz, &ioc->config_page_dma);
2284 if (!ioc->config_page) {
2285 printk(MPT2SAS_ERR_FMT "config page: pci_pool_alloc "
2286 "failed\n", ioc->name);
2289 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config page(0x%p): size"
2290 "(%d)\n", ioc->name, ioc->config_page, ioc->config_page_sz));
2291 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "config_page_dma"
2292 "(0x%llx)\n", ioc->name, (unsigned long long)ioc->config_page_dma));
2293 total_sz += ioc->config_page_sz;
2295 printk(MPT2SAS_INFO_FMT "Allocated physical memory: size(%d kB)\n",
2296 ioc->name, total_sz/1024);
2297 printk(MPT2SAS_INFO_FMT "Current Controller Queue Depth(%d), "
2298 "Max Controller Queue Depth(%d)\n",
2299 ioc->name, ioc->shost->can_queue, facts->RequestCredit);
2300 printk(MPT2SAS_INFO_FMT "Scatter Gather Elements per IO(%d)\n",
2301 ioc->name, ioc->shost->sg_tablesize);
2305 _base_release_memory_pools(ioc);
2311 * mpt2sas_base_get_iocstate - Get the current state of a MPT adapter.
2312 * @ioc: Pointer to MPT_ADAPTER structure
2313 * @cooked: Request raw or cooked IOC state
2315 * Returns all IOC Doorbell register bits if cooked==0, else just the
2316 * Doorbell bits in MPI_IOC_STATE_MASK.
2319 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked)
2323 s = readl(&ioc->chip->Doorbell);
2324 sc = s & MPI2_IOC_STATE_MASK;
2325 return cooked ? sc : s;
2329 * _base_wait_on_iocstate - waiting on a particular ioc state
2330 * @ioc_state: controller state { READY, OPERATIONAL, or RESET }
2331 * @timeout: timeout in second
2332 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2334 * Returns 0 for success, non-zero for failure.
2337 _base_wait_on_iocstate(struct MPT2SAS_ADAPTER *ioc, u32 ioc_state, int timeout,
2344 cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
2346 current_state = mpt2sas_base_get_iocstate(ioc, 1);
2347 if (current_state == ioc_state)
2349 if (count && current_state == MPI2_IOC_STATE_FAULT)
2351 if (sleep_flag == CAN_SLEEP)
2358 return current_state;
2362 * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by
2363 * a write to the doorbell)
2364 * @ioc: per adapter object
2365 * @timeout: timeout in second
2366 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2368 * Returns 0 for success, non-zero for failure.
2370 * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell.
2373 _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
2380 cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
2382 int_status = readl(&ioc->chip->HostInterruptStatus);
2383 if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
2384 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
2385 "successfull count(%d), timeout(%d)\n", ioc->name,
2386 __func__, count, timeout));
2389 if (sleep_flag == CAN_SLEEP)
2396 printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
2397 "int_status(%x)!\n", ioc->name, __func__, count, int_status);
2402 * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell.
2403 * @ioc: per adapter object
2404 * @timeout: timeout in second
2405 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2407 * Returns 0 for success, non-zero for failure.
2409 * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to
2413 _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
2421 cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
2423 int_status = readl(&ioc->chip->HostInterruptStatus);
2424 if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
2425 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
2426 "successfull count(%d), timeout(%d)\n", ioc->name,
2427 __func__, count, timeout));
2429 } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
2430 doorbell = readl(&ioc->chip->Doorbell);
2431 if ((doorbell & MPI2_IOC_STATE_MASK) ==
2432 MPI2_IOC_STATE_FAULT) {
2433 mpt2sas_base_fault_info(ioc , doorbell);
2436 } else if (int_status == 0xFFFFFFFF)
2439 if (sleep_flag == CAN_SLEEP)
2447 printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
2448 "int_status(%x)!\n", ioc->name, __func__, count, int_status);
2453 * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use
2454 * @ioc: per adapter object
2455 * @timeout: timeout in second
2456 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2458 * Returns 0 for success, non-zero for failure.
2462 _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
2469 cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
2471 doorbell_reg = readl(&ioc->chip->Doorbell);
2472 if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
2473 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
2474 "successfull count(%d), timeout(%d)\n", ioc->name,
2475 __func__, count, timeout));
2478 if (sleep_flag == CAN_SLEEP)
2485 printk(MPT2SAS_ERR_FMT "%s: failed due to timeout count(%d), "
2486 "doorbell_reg(%x)!\n", ioc->name, __func__, count, doorbell_reg);
2491 * _base_send_ioc_reset - send doorbell reset
2492 * @ioc: per adapter object
2493 * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET
2494 * @timeout: timeout in second
2495 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2497 * Returns 0 for success, non-zero for failure.
2500 _base_send_ioc_reset(struct MPT2SAS_ADAPTER *ioc, u8 reset_type, int timeout,
2506 if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) {
2507 printk(MPT2SAS_ERR_FMT "%s: unknown reset_type\n",
2508 ioc->name, __func__);
2512 if (!(ioc->facts.IOCCapabilities &
2513 MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY))
2516 printk(MPT2SAS_INFO_FMT "sending message unit reset !!\n", ioc->name);
2518 writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT,
2519 &ioc->chip->Doorbell);
2520 if ((_base_wait_for_doorbell_ack(ioc, 15, sleep_flag))) {
2524 ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY,
2525 timeout, sleep_flag);
2527 printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
2528 " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
2533 printk(MPT2SAS_INFO_FMT "message unit reset: %s\n",
2534 ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
2539 * _base_handshake_req_reply_wait - send request thru doorbell interface
2540 * @ioc: per adapter object
2541 * @request_bytes: request length
2542 * @request: pointer having request payload
2543 * @reply_bytes: reply length
2544 * @reply: pointer to reply payload
2545 * @timeout: timeout in second
2546 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2548 * Returns 0 for success, non-zero for failure.
2551 _base_handshake_req_reply_wait(struct MPT2SAS_ADAPTER *ioc, int request_bytes,
2552 u32 *request, int reply_bytes, u16 *reply, int timeout, int sleep_flag)
2554 MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply;
2560 /* make sure doorbell is not in use */
2561 if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
2562 printk(MPT2SAS_ERR_FMT "doorbell is in use "
2563 " (line=%d)\n", ioc->name, __LINE__);
2567 /* clear pending doorbell interrupts from previous state changes */
2568 if (readl(&ioc->chip->HostInterruptStatus) &
2569 MPI2_HIS_IOC2SYS_DB_STATUS)
2570 writel(0, &ioc->chip->HostInterruptStatus);
2572 /* send message to ioc */
2573 writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) |
2574 ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
2575 &ioc->chip->Doorbell);
2577 if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
2578 printk(MPT2SAS_ERR_FMT "doorbell handshake "
2579 "int failed (line=%d)\n", ioc->name, __LINE__);
2582 writel(0, &ioc->chip->HostInterruptStatus);
2584 if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag))) {
2585 printk(MPT2SAS_ERR_FMT "doorbell handshake "
2586 "ack failed (line=%d)\n", ioc->name, __LINE__);
2590 /* send message 32-bits at a time */
2591 for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) {
2592 writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell);
2593 if ((_base_wait_for_doorbell_ack(ioc, 5, sleep_flag)))
2598 printk(MPT2SAS_ERR_FMT "doorbell handshake "
2599 "sending request failed (line=%d)\n", ioc->name, __LINE__);
2603 /* now wait for the reply */
2604 if ((_base_wait_for_doorbell_int(ioc, timeout, sleep_flag))) {
2605 printk(MPT2SAS_ERR_FMT "doorbell handshake "
2606 "int failed (line=%d)\n", ioc->name, __LINE__);
2610 /* read the first two 16-bits, it gives the total length of the reply */
2611 reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
2612 & MPI2_DOORBELL_DATA_MASK);
2613 writel(0, &ioc->chip->HostInterruptStatus);
2614 if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
2615 printk(MPT2SAS_ERR_FMT "doorbell handshake "
2616 "int failed (line=%d)\n", ioc->name, __LINE__);
2619 reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
2620 & MPI2_DOORBELL_DATA_MASK);
2621 writel(0, &ioc->chip->HostInterruptStatus);
2623 for (i = 2; i < default_reply->MsgLength * 2; i++) {
2624 if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
2625 printk(MPT2SAS_ERR_FMT "doorbell "
2626 "handshake int failed (line=%d)\n", ioc->name,
2630 if (i >= reply_bytes/2) /* overflow case */
2631 dummy = readl(&ioc->chip->Doorbell);
2633 reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
2634 & MPI2_DOORBELL_DATA_MASK);
2635 writel(0, &ioc->chip->HostInterruptStatus);
2638 _base_wait_for_doorbell_int(ioc, 5, sleep_flag);
2639 if (_base_wait_for_doorbell_not_used(ioc, 5, sleep_flag) != 0) {
2640 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "doorbell is in use "
2641 " (line=%d)\n", ioc->name, __LINE__));
2643 writel(0, &ioc->chip->HostInterruptStatus);
2645 if (ioc->logging_level & MPT_DEBUG_INIT) {
2647 printk(KERN_INFO "\toffset:data\n");
2648 for (i = 0; i < reply_bytes/4; i++)
2649 printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
2650 le32_to_cpu(mfp[i]));
2656 * mpt2sas_base_sas_iounit_control - send sas iounit control to FW
2657 * @ioc: per adapter object
2658 * @mpi_reply: the reply payload from FW
2659 * @mpi_request: the request payload sent to FW
2661 * The SAS IO Unit Control Request message allows the host to perform low-level
2662 * operations, such as resets on the PHYs of the IO Unit, also allows the host
2663 * to obtain the IOC assigned device handles for a device if it has other
2664 * identifying information about the device, in addition allows the host to
2665 * remove IOC resources associated with the device.
2667 * Returns 0 for success, non-zero for failure.
2670 mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
2671 Mpi2SasIoUnitControlReply_t *mpi_reply,
2672 Mpi2SasIoUnitControlRequest_t *mpi_request)
2676 unsigned long timeleft;
2680 u16 wait_state_count;
2682 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
2685 mutex_lock(&ioc->base_cmds.mutex);
2687 if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
2688 printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
2689 ioc->name, __func__);
2694 wait_state_count = 0;
2695 ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
2696 while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
2697 if (wait_state_count++ == 10) {
2698 printk(MPT2SAS_ERR_FMT
2699 "%s: failed due to ioc not operational\n",
2700 ioc->name, __func__);
2705 ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
2706 printk(MPT2SAS_INFO_FMT "%s: waiting for "
2707 "operational state(count=%d)\n", ioc->name,
2708 __func__, wait_state_count);
2711 smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
2713 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
2714 ioc->name, __func__);
2720 ioc->base_cmds.status = MPT2_CMD_PENDING;
2721 request = mpt2sas_base_get_msg_frame(ioc, smid);
2722 ioc->base_cmds.smid = smid;
2723 memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t));
2724 if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
2725 mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
2726 ioc->ioc_link_reset_in_progress = 1;
2727 mpt2sas_base_put_smid_default(ioc, smid);
2728 init_completion(&ioc->base_cmds.done);
2729 timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
2730 msecs_to_jiffies(10000));
2731 if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
2732 mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) &&
2733 ioc->ioc_link_reset_in_progress)
2734 ioc->ioc_link_reset_in_progress = 0;
2735 if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
2736 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
2737 ioc->name, __func__);
2738 _debug_dump_mf(mpi_request,
2739 sizeof(Mpi2SasIoUnitControlRequest_t)/4);
2740 if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
2742 goto issue_host_reset;
2744 if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
2745 memcpy(mpi_reply, ioc->base_cmds.reply,
2746 sizeof(Mpi2SasIoUnitControlReply_t));
2748 memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t));
2749 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
2754 mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2756 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
2759 mutex_unlock(&ioc->base_cmds.mutex);
2765 * mpt2sas_base_scsi_enclosure_processor - sending request to sep device
2766 * @ioc: per adapter object
2767 * @mpi_reply: the reply payload from FW
2768 * @mpi_request: the request payload sent to FW
2770 * The SCSI Enclosure Processor request message causes the IOC to
2771 * communicate with SES devices to control LED status signals.
2773 * Returns 0 for success, non-zero for failure.
2776 mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
2777 Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request)
2781 unsigned long timeleft;
2785 u16 wait_state_count;
2787 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
2790 mutex_lock(&ioc->base_cmds.mutex);
2792 if (ioc->base_cmds.status != MPT2_CMD_NOT_USED) {
2793 printk(MPT2SAS_ERR_FMT "%s: base_cmd in use\n",
2794 ioc->name, __func__);
2799 wait_state_count = 0;
2800 ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
2801 while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
2802 if (wait_state_count++ == 10) {
2803 printk(MPT2SAS_ERR_FMT
2804 "%s: failed due to ioc not operational\n",
2805 ioc->name, __func__);
2810 ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
2811 printk(MPT2SAS_INFO_FMT "%s: waiting for "
2812 "operational state(count=%d)\n", ioc->name,
2813 __func__, wait_state_count);
2816 smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
2818 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
2819 ioc->name, __func__);
2825 ioc->base_cmds.status = MPT2_CMD_PENDING;
2826 request = mpt2sas_base_get_msg_frame(ioc, smid);
2827 ioc->base_cmds.smid = smid;
2828 memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
2829 mpt2sas_base_put_smid_default(ioc, smid);
2830 init_completion(&ioc->base_cmds.done);
2831 timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
2832 msecs_to_jiffies(10000));
2833 if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
2834 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
2835 ioc->name, __func__);
2836 _debug_dump_mf(mpi_request,
2837 sizeof(Mpi2SepRequest_t)/4);
2838 if (!(ioc->base_cmds.status & MPT2_CMD_RESET))
2840 goto issue_host_reset;
2842 if (ioc->base_cmds.status & MPT2_CMD_REPLY_VALID)
2843 memcpy(mpi_reply, ioc->base_cmds.reply,
2844 sizeof(Mpi2SepReply_t));
2846 memset(mpi_reply, 0, sizeof(Mpi2SepReply_t));
2847 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
2852 mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
2854 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
2857 mutex_unlock(&ioc->base_cmds.mutex);
2862 * _base_get_port_facts - obtain port facts reply and save in ioc
2863 * @ioc: per adapter object
2864 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2866 * Returns 0 for success, non-zero for failure.
2869 _base_get_port_facts(struct MPT2SAS_ADAPTER *ioc, int port, int sleep_flag)
2871 Mpi2PortFactsRequest_t mpi_request;
2872 Mpi2PortFactsReply_t mpi_reply, *pfacts;
2873 int mpi_reply_sz, mpi_request_sz, r;
2875 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
2878 mpi_reply_sz = sizeof(Mpi2PortFactsReply_t);
2879 mpi_request_sz = sizeof(Mpi2PortFactsRequest_t);
2880 memset(&mpi_request, 0, mpi_request_sz);
2881 mpi_request.Function = MPI2_FUNCTION_PORT_FACTS;
2882 mpi_request.PortNumber = port;
2883 r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
2884 (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
2887 printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
2888 ioc->name, __func__, r);
2892 pfacts = &ioc->pfacts[port];
2893 memset(pfacts, 0, sizeof(Mpi2PortFactsReply_t));
2894 pfacts->PortNumber = mpi_reply.PortNumber;
2895 pfacts->VP_ID = mpi_reply.VP_ID;
2896 pfacts->VF_ID = mpi_reply.VF_ID;
2897 pfacts->MaxPostedCmdBuffers =
2898 le16_to_cpu(mpi_reply.MaxPostedCmdBuffers);
2904 * _base_get_ioc_facts - obtain ioc facts reply and save in ioc
2905 * @ioc: per adapter object
2906 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2908 * Returns 0 for success, non-zero for failure.
2911 _base_get_ioc_facts(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
2913 Mpi2IOCFactsRequest_t mpi_request;
2914 Mpi2IOCFactsReply_t mpi_reply, *facts;
2915 int mpi_reply_sz, mpi_request_sz, r;
2917 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
2920 mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t);
2921 mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t);
2922 memset(&mpi_request, 0, mpi_request_sz);
2923 mpi_request.Function = MPI2_FUNCTION_IOC_FACTS;
2924 r = _base_handshake_req_reply_wait(ioc, mpi_request_sz,
2925 (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5, CAN_SLEEP);
2928 printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
2929 ioc->name, __func__, r);
2933 facts = &ioc->facts;
2934 memset(facts, 0, sizeof(Mpi2IOCFactsReply_t));
2935 facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion);
2936 facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion);
2937 facts->VP_ID = mpi_reply.VP_ID;
2938 facts->VF_ID = mpi_reply.VF_ID;
2939 facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions);
2940 facts->MaxChainDepth = mpi_reply.MaxChainDepth;
2941 facts->WhoInit = mpi_reply.WhoInit;
2942 facts->NumberOfPorts = mpi_reply.NumberOfPorts;
2943 facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit);
2944 facts->MaxReplyDescriptorPostQueueDepth =
2945 le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth);
2946 facts->ProductID = le16_to_cpu(mpi_reply.ProductID);
2947 facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities);
2948 if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID))
2949 ioc->ir_firmware = 1;
2950 facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word);
2951 facts->IOCRequestFrameSize =
2952 le16_to_cpu(mpi_reply.IOCRequestFrameSize);
2953 facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators);
2954 facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets);
2955 ioc->shost->max_id = -1;
2956 facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders);
2957 facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures);
2958 facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags);
2959 facts->HighPriorityCredit =
2960 le16_to_cpu(mpi_reply.HighPriorityCredit);
2961 facts->ReplyFrameSize = mpi_reply.ReplyFrameSize;
2962 facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle);
2964 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hba queue depth(%d), "
2965 "max chains per io(%d)\n", ioc->name, facts->RequestCredit,
2966 facts->MaxChainDepth));
2967 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request frame size(%d), "
2968 "reply frame size(%d)\n", ioc->name,
2969 facts->IOCRequestFrameSize * 4, facts->ReplyFrameSize * 4));
2974 * _base_send_ioc_init - send ioc_init to firmware
2975 * @ioc: per adapter object
2976 * @sleep_flag: CAN_SLEEP or NO_SLEEP
2978 * Returns 0 for success, non-zero for failure.
2981 _base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
2983 Mpi2IOCInitRequest_t mpi_request;
2984 Mpi2IOCInitReply_t mpi_reply;
2986 struct timeval current_time;
2989 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
2992 memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
2993 mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
2994 mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
2995 mpi_request.VF_ID = 0; /* TODO */
2996 mpi_request.VP_ID = 0;
2997 mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
2998 mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
3000 /* In MPI Revision I (0xA), the SystemReplyFrameSize(offset 0x18) was
3001 * removed and made reserved. For those with older firmware will need
3002 * this fix. It was decided that the Reply and Request frame sizes are
3005 if ((ioc->facts.HeaderVersion >> 8) < 0xA) {
3006 mpi_request.Reserved7 = cpu_to_le16(ioc->reply_sz);
3007 /* mpi_request.SystemReplyFrameSize =
3008 * cpu_to_le16(ioc->reply_sz);
3012 mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4);
3013 mpi_request.ReplyDescriptorPostQueueDepth =
3014 cpu_to_le16(ioc->reply_post_queue_depth);
3015 mpi_request.ReplyFreeQueueDepth =
3016 cpu_to_le16(ioc->reply_free_queue_depth);
3018 #if BITS_PER_LONG > 32
3019 mpi_request.SenseBufferAddressHigh =
3020 cpu_to_le32(ioc->sense_dma >> 32);
3021 mpi_request.SystemReplyAddressHigh =
3022 cpu_to_le32(ioc->reply_dma >> 32);
3023 mpi_request.SystemRequestFrameBaseAddress =
3024 cpu_to_le64(ioc->request_dma);
3025 mpi_request.ReplyFreeQueueAddress =
3026 cpu_to_le64(ioc->reply_free_dma);
3027 mpi_request.ReplyDescriptorPostQueueAddress =
3028 cpu_to_le64(ioc->reply_post_free_dma);
3030 mpi_request.SystemRequestFrameBaseAddress =
3031 cpu_to_le32(ioc->request_dma);
3032 mpi_request.ReplyFreeQueueAddress =
3033 cpu_to_le32(ioc->reply_free_dma);
3034 mpi_request.ReplyDescriptorPostQueueAddress =
3035 cpu_to_le32(ioc->reply_post_free_dma);
3038 /* This time stamp specifies number of milliseconds
3039 * since epoch ~ midnight January 1, 1970.
3041 do_gettimeofday(¤t_time);
3042 mpi_request.TimeStamp = cpu_to_le64((u64)current_time.tv_sec * 1000 +
3043 (current_time.tv_usec / 1000));
3045 if (ioc->logging_level & MPT_DEBUG_INIT) {
3049 mfp = (u32 *)&mpi_request;
3050 printk(KERN_INFO "\toffset:data\n");
3051 for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++)
3052 printk(KERN_INFO "\t[0x%02x]:%08x\n", i*4,
3053 le32_to_cpu(mfp[i]));
3056 r = _base_handshake_req_reply_wait(ioc,
3057 sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request,
3058 sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 10,
3062 printk(MPT2SAS_ERR_FMT "%s: handshake failed (r=%d)\n",
3063 ioc->name, __func__, r);
3067 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
3068 if (ioc_status != MPI2_IOCSTATUS_SUCCESS ||
3069 mpi_reply.IOCLogInfo) {
3070 printk(MPT2SAS_ERR_FMT "%s: failed\n", ioc->name, __func__);
3078 * _base_send_port_enable - send port_enable(discovery stuff) to firmware
3079 * @ioc: per adapter object
3080 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3082 * Returns 0 for success, non-zero for failure.
3085 _base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
3087 Mpi2PortEnableRequest_t *mpi_request;
3089 unsigned long timeleft;
3093 printk(MPT2SAS_INFO_FMT "sending port enable !!\n", ioc->name);
3095 if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
3096 printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
3097 ioc->name, __func__);
3101 smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
3103 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
3104 ioc->name, __func__);
3108 ioc->base_cmds.status = MPT2_CMD_PENDING;
3109 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
3110 ioc->base_cmds.smid = smid;
3111 memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
3112 mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
3113 mpi_request->VF_ID = 0; /* TODO */
3114 mpi_request->VP_ID = 0;
3116 mpt2sas_base_put_smid_default(ioc, smid);
3117 init_completion(&ioc->base_cmds.done);
3118 timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
3120 if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
3121 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
3122 ioc->name, __func__);
3123 _debug_dump_mf(mpi_request,
3124 sizeof(Mpi2PortEnableRequest_t)/4);
3125 if (ioc->base_cmds.status & MPT2_CMD_RESET)
3131 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
3132 ioc->name, __func__));
3134 ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_OPERATIONAL,
3137 printk(MPT2SAS_ERR_FMT "%s: failed going to operational state "
3138 " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
3142 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
3143 printk(MPT2SAS_INFO_FMT "port enable: %s\n",
3144 ioc->name, ((r == 0) ? "SUCCESS" : "FAILED"));
3149 * _base_unmask_events - turn on notification for this event
3150 * @ioc: per adapter object
3151 * @event: firmware event
3153 * The mask is stored in ioc->event_masks.
3156 _base_unmask_events(struct MPT2SAS_ADAPTER *ioc, u16 event)
3163 desired_event = (1 << (event % 32));
3166 ioc->event_masks[0] &= ~desired_event;
3167 else if (event < 64)
3168 ioc->event_masks[1] &= ~desired_event;
3169 else if (event < 96)
3170 ioc->event_masks[2] &= ~desired_event;
3171 else if (event < 128)
3172 ioc->event_masks[3] &= ~desired_event;
3176 * _base_event_notification - send event notification
3177 * @ioc: per adapter object
3178 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3180 * Returns 0 for success, non-zero for failure.
3183 _base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
3185 Mpi2EventNotificationRequest_t *mpi_request;
3186 unsigned long timeleft;
3191 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
3194 if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
3195 printk(MPT2SAS_ERR_FMT "%s: internal command already in use\n",
3196 ioc->name, __func__);
3200 smid = mpt2sas_base_get_smid(ioc, ioc->base_cb_idx);
3202 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
3203 ioc->name, __func__);
3206 ioc->base_cmds.status = MPT2_CMD_PENDING;
3207 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
3208 ioc->base_cmds.smid = smid;
3209 memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
3210 mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
3211 mpi_request->VF_ID = 0; /* TODO */
3212 mpi_request->VP_ID = 0;
3213 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
3214 mpi_request->EventMasks[i] =
3215 cpu_to_le32(ioc->event_masks[i]);
3216 mpt2sas_base_put_smid_default(ioc, smid);
3217 init_completion(&ioc->base_cmds.done);
3218 timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
3219 if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
3220 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
3221 ioc->name, __func__);
3222 _debug_dump_mf(mpi_request,
3223 sizeof(Mpi2EventNotificationRequest_t)/4);
3224 if (ioc->base_cmds.status & MPT2_CMD_RESET)
3229 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: complete\n",
3230 ioc->name, __func__));
3231 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
3236 * mpt2sas_base_validate_event_type - validating event types
3237 * @ioc: per adapter object
3238 * @event: firmware event
3240 * This will turn on firmware event notification when application
3241 * ask for that event. We don't mask events that are already enabled.
3244 mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type)
3247 u32 event_mask, desired_event;
3248 u8 send_update_to_fw;
3250 for (i = 0, send_update_to_fw = 0; i <
3251 MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) {
3252 event_mask = ~event_type[i];
3254 for (j = 0; j < 32; j++) {
3255 if (!(event_mask & desired_event) &&
3256 (ioc->event_masks[i] & desired_event)) {
3257 ioc->event_masks[i] &= ~desired_event;
3258 send_update_to_fw = 1;
3260 desired_event = (desired_event << 1);
3264 if (!send_update_to_fw)
3267 mutex_lock(&ioc->base_cmds.mutex);
3268 _base_event_notification(ioc, CAN_SLEEP);
3269 mutex_unlock(&ioc->base_cmds.mutex);
3273 * _base_diag_reset - the "big hammer" start of day reset
3274 * @ioc: per adapter object
3275 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3277 * Returns 0 for success, non-zero for failure.
3280 _base_diag_reset(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
3282 u32 host_diagnostic;
3287 printk(MPT2SAS_INFO_FMT "sending diag reset !!\n", ioc->name);
3289 _base_save_msix_table(ioc);
3291 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "clear interrupts\n",
3296 /* Write magic sequence to WriteSequence register
3297 * Loop until in diagnostic mode
3299 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "write magic "
3300 "sequence\n", ioc->name));
3301 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
3302 writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence);
3303 writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence);
3304 writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence);
3305 writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence);
3306 writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence);
3307 writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence);
3310 if (sleep_flag == CAN_SLEEP)
3318 host_diagnostic = readl(&ioc->chip->HostDiagnostic);
3319 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "wrote magic "
3320 "sequence: count(%d), host_diagnostic(0x%08x)\n",
3321 ioc->name, count, host_diagnostic));
3323 } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
3325 hcb_size = readl(&ioc->chip->HCBSize);
3327 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "diag reset: issued\n",
3329 writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
3330 &ioc->chip->HostDiagnostic);
3332 /* don't access any registers for 50 milliseconds */
3335 /* 300 second max wait */
3336 for (count = 0; count < 3000000 ; count++) {
3338 host_diagnostic = readl(&ioc->chip->HostDiagnostic);
3340 if (host_diagnostic == 0xFFFFFFFF)
3342 if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER))
3346 if (sleep_flag == CAN_SLEEP)
3352 if (host_diagnostic & MPI2_DIAG_HCB_MODE) {
3354 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter "
3355 "assuming the HCB Address points to good F/W\n",
3357 host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK;
3358 host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW;
3359 writel(host_diagnostic, &ioc->chip->HostDiagnostic);
3361 drsprintk(ioc, printk(MPT2SAS_INFO_FMT
3362 "re-enable the HCDW\n", ioc->name));
3363 writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE,
3364 &ioc->chip->HCBSize);
3367 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "restart the adapter\n",
3369 writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET,
3370 &ioc->chip->HostDiagnostic);
3372 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "disable writes to the "
3373 "diagnostic register\n", ioc->name));
3374 writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence);
3376 drsprintk(ioc, printk(MPT2SAS_INFO_FMT "Wait for FW to go to the "
3377 "READY state\n", ioc->name));
3378 ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20,
3381 printk(MPT2SAS_ERR_FMT "%s: failed going to ready state "
3382 " (ioc_state=0x%x)\n", ioc->name, __func__, ioc_state);
3386 _base_restore_msix_table(ioc);
3387 printk(MPT2SAS_INFO_FMT "diag reset: SUCCESS\n", ioc->name);
3391 printk(MPT2SAS_ERR_FMT "diag reset: FAILED\n", ioc->name);
3396 * _base_make_ioc_ready - put controller in READY state
3397 * @ioc: per adapter object
3398 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3399 * @type: FORCE_BIG_HAMMER or SOFT_RESET
3401 * Returns 0 for success, non-zero for failure.
3404 _base_make_ioc_ready(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
3405 enum reset_type type)
3410 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
3413 if (ioc->pci_error_recovery)
3416 ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
3417 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: ioc_state(0x%08x)\n",
3418 ioc->name, __func__, ioc_state));
3420 if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY)
3423 if (ioc_state & MPI2_DOORBELL_USED) {
3424 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell "
3425 "active!\n", ioc->name));
3426 goto issue_diag_reset;
3429 if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
3430 mpt2sas_base_fault_info(ioc, ioc_state &
3431 MPI2_DOORBELL_DATA_MASK);
3432 goto issue_diag_reset;
3435 if (type == FORCE_BIG_HAMMER)
3436 goto issue_diag_reset;
3438 if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL)
3439 if (!(_base_send_ioc_reset(ioc,
3440 MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15, CAN_SLEEP))) {
3441 ioc->ioc_reset_count++;
3446 rc = _base_diag_reset(ioc, CAN_SLEEP);
3447 ioc->ioc_reset_count++;
3452 * _base_make_ioc_operational - put controller in OPERATIONAL state
3453 * @ioc: per adapter object
3454 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3456 * Returns 0 for success, non-zero for failure.
3459 _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
3462 unsigned long flags;
3465 struct _tr_list *delayed_tr, *delayed_tr_next;
3467 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
3470 /* clean the delayed target reset list */
3471 list_for_each_entry_safe(delayed_tr, delayed_tr_next,
3472 &ioc->delayed_tr_list, list) {
3473 list_del(&delayed_tr->list);
3477 list_for_each_entry_safe(delayed_tr, delayed_tr_next,
3478 &ioc->delayed_tr_volume_list, list) {
3479 list_del(&delayed_tr->list);
3483 /* initialize the scsi lookup free list */
3484 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
3485 INIT_LIST_HEAD(&ioc->free_list);
3487 for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
3488 ioc->scsi_lookup[i].cb_idx = 0xFF;
3489 ioc->scsi_lookup[i].smid = smid;
3490 ioc->scsi_lookup[i].scmd = NULL;
3491 list_add_tail(&ioc->scsi_lookup[i].tracker_list,
3495 /* hi-priority queue */
3496 INIT_LIST_HEAD(&ioc->hpr_free_list);
3497 smid = ioc->hi_priority_smid;
3498 for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
3499 ioc->hpr_lookup[i].cb_idx = 0xFF;
3500 ioc->hpr_lookup[i].smid = smid;
3501 list_add_tail(&ioc->hpr_lookup[i].tracker_list,
3502 &ioc->hpr_free_list);
3505 /* internal queue */
3506 INIT_LIST_HEAD(&ioc->internal_free_list);
3507 smid = ioc->internal_smid;
3508 for (i = 0; i < ioc->internal_depth; i++, smid++) {
3509 ioc->internal_lookup[i].cb_idx = 0xFF;
3510 ioc->internal_lookup[i].smid = smid;
3511 list_add_tail(&ioc->internal_lookup[i].tracker_list,
3512 &ioc->internal_free_list);
3514 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
3516 /* initialize Reply Free Queue */
3517 for (i = 0, reply_address = (u32)ioc->reply_dma ;
3518 i < ioc->reply_free_queue_depth ; i++, reply_address +=
3520 ioc->reply_free[i] = cpu_to_le32(reply_address);
3522 /* initialize Reply Post Free Queue */
3523 for (i = 0; i < ioc->reply_post_queue_depth; i++)
3524 ioc->reply_post_free[i].Words = ULLONG_MAX;
3526 r = _base_send_ioc_init(ioc, sleep_flag);
3530 /* initialize the index's */
3531 ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1;
3532 ioc->reply_post_host_index = 0;
3533 writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex);
3534 writel(0, &ioc->chip->ReplyPostHostIndex);
3536 _base_unmask_interrupts(ioc);
3537 r = _base_event_notification(ioc, sleep_flag);
3541 if (sleep_flag == CAN_SLEEP)
3542 _base_static_config_pages(ioc);
3544 if (ioc->wait_for_port_enable_to_complete) {
3545 if (diag_buffer_enable != 0)
3546 mpt2sas_enable_diag_buffer(ioc, diag_buffer_enable);
3547 if (disable_discovery > 0)
3551 r = _base_send_port_enable(ioc, sleep_flag);
3559 * mpt2sas_base_free_resources - free resources controller resources (io/irq/memap)
3560 * @ioc: per adapter object
3565 mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc)
3567 struct pci_dev *pdev = ioc->pdev;
3569 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
3572 _base_mask_interrupts(ioc);
3573 ioc->shost_recovery = 1;
3574 _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
3575 ioc->shost_recovery = 0;
3577 synchronize_irq(pdev->irq);
3578 free_irq(ioc->pci_irq, ioc);
3580 _base_disable_msix(ioc);
3585 pci_release_selected_regions(ioc->pdev, ioc->bars);
3586 pci_disable_pcie_error_reporting(pdev);
3587 pci_disable_device(pdev);
3592 * mpt2sas_base_attach - attach controller instance
3593 * @ioc: per adapter object
3595 * Returns 0 for success, non-zero for failure.
3598 mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc)
3602 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
3605 r = mpt2sas_base_map_resources(ioc);
3609 pci_set_drvdata(ioc->pdev, ioc->shost);
3610 r = _base_get_ioc_facts(ioc, CAN_SLEEP);
3612 goto out_free_resources;
3614 r = _base_make_ioc_ready(ioc, CAN_SLEEP, SOFT_RESET);
3616 goto out_free_resources;
3618 ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
3619 sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
3622 goto out_free_resources;
3625 for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
3626 r = _base_get_port_facts(ioc, i, CAN_SLEEP);
3628 goto out_free_resources;
3631 r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
3633 goto out_free_resources;
3635 init_waitqueue_head(&ioc->reset_wq);
3637 /* allocate memory pd handle bitmask list */
3638 ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8);
3639 if (ioc->facts.MaxDevHandle % 8)
3640 ioc->pd_handles_sz++;
3641 ioc->pd_handles = kzalloc(ioc->pd_handles_sz,
3643 if (!ioc->pd_handles) {
3645 goto out_free_resources;
3648 ioc->fwfault_debug = mpt2sas_fwfault_debug;
3650 /* base internal command bits */
3651 mutex_init(&ioc->base_cmds.mutex);
3652 ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
3653 ioc->base_cmds.status = MPT2_CMD_NOT_USED;
3655 /* transport internal command bits */
3656 ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
3657 ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
3658 mutex_init(&ioc->transport_cmds.mutex);
3660 /* scsih internal command bits */
3661 ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
3662 ioc->scsih_cmds.status = MPT2_CMD_NOT_USED;
3663 mutex_init(&ioc->scsih_cmds.mutex);
3665 /* task management internal command bits */
3666 ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
3667 ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
3668 mutex_init(&ioc->tm_cmds.mutex);
3670 /* config page internal command bits */
3671 ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
3672 ioc->config_cmds.status = MPT2_CMD_NOT_USED;
3673 mutex_init(&ioc->config_cmds.mutex);
3675 /* ctl module internal command bits */
3676 ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
3677 ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL);
3678 ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
3679 mutex_init(&ioc->ctl_cmds.mutex);
3681 if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
3682 !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
3683 !ioc->config_cmds.reply || !ioc->ctl_cmds.reply ||
3684 !ioc->ctl_cmds.sense) {
3686 goto out_free_resources;
3689 if (!ioc->base_cmds.reply || !ioc->transport_cmds.reply ||
3690 !ioc->scsih_cmds.reply || !ioc->tm_cmds.reply ||
3691 !ioc->config_cmds.reply || !ioc->ctl_cmds.reply) {
3693 goto out_free_resources;
3696 init_completion(&ioc->shost_recovery_done);
3698 for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
3699 ioc->event_masks[i] = -1;
3701 /* here we enable the events we care about */
3702 _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY);
3703 _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE);
3704 _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST);
3705 _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
3706 _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE);
3707 _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST);
3708 _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME);
3709 _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK);
3710 _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
3711 _base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL);
3712 _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
3713 r = _base_make_ioc_operational(ioc, CAN_SLEEP);
3715 goto out_free_resources;
3717 mpt2sas_base_start_watchdog(ioc);
3722 ioc->remove_host = 1;
3723 mpt2sas_base_free_resources(ioc);
3724 _base_release_memory_pools(ioc);
3725 pci_set_drvdata(ioc->pdev, NULL);
3726 kfree(ioc->pd_handles);
3727 kfree(ioc->tm_cmds.reply);
3728 kfree(ioc->transport_cmds.reply);
3729 kfree(ioc->scsih_cmds.reply);
3730 kfree(ioc->config_cmds.reply);
3731 kfree(ioc->base_cmds.reply);
3732 kfree(ioc->ctl_cmds.reply);
3733 kfree(ioc->ctl_cmds.sense);
3735 ioc->ctl_cmds.reply = NULL;
3736 ioc->base_cmds.reply = NULL;
3737 ioc->tm_cmds.reply = NULL;
3738 ioc->scsih_cmds.reply = NULL;
3739 ioc->transport_cmds.reply = NULL;
3740 ioc->config_cmds.reply = NULL;
3747 * mpt2sas_base_detach - remove controller instance
3748 * @ioc: per adapter object
3753 mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc)
3756 dexitprintk(ioc, printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
3759 mpt2sas_base_stop_watchdog(ioc);
3760 mpt2sas_base_free_resources(ioc);
3761 _base_release_memory_pools(ioc);
3762 pci_set_drvdata(ioc->pdev, NULL);
3763 kfree(ioc->pd_handles);
3765 kfree(ioc->ctl_cmds.reply);
3766 kfree(ioc->ctl_cmds.sense);
3767 kfree(ioc->base_cmds.reply);
3768 kfree(ioc->tm_cmds.reply);
3769 kfree(ioc->transport_cmds.reply);
3770 kfree(ioc->scsih_cmds.reply);
3771 kfree(ioc->config_cmds.reply);
3775 * _base_reset_handler - reset callback handler (for base)
3776 * @ioc: per adapter object
3777 * @reset_phase: phase
3779 * The handler for doing any required cleanup or initialization.
3781 * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
3782 * MPT2_IOC_DONE_RESET
3787 _base_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
3789 switch (reset_phase) {
3790 case MPT2_IOC_PRE_RESET:
3791 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
3792 "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
3794 case MPT2_IOC_AFTER_RESET:
3795 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
3796 "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
3797 if (ioc->transport_cmds.status & MPT2_CMD_PENDING) {
3798 ioc->transport_cmds.status |= MPT2_CMD_RESET;
3799 mpt2sas_base_free_smid(ioc, ioc->transport_cmds.smid);
3800 complete(&ioc->transport_cmds.done);
3802 if (ioc->base_cmds.status & MPT2_CMD_PENDING) {
3803 ioc->base_cmds.status |= MPT2_CMD_RESET;
3804 mpt2sas_base_free_smid(ioc, ioc->base_cmds.smid);
3805 complete(&ioc->base_cmds.done);
3807 if (ioc->config_cmds.status & MPT2_CMD_PENDING) {
3808 ioc->config_cmds.status |= MPT2_CMD_RESET;
3809 mpt2sas_base_free_smid(ioc, ioc->config_cmds.smid);
3810 ioc->config_cmds.smid = USHRT_MAX;
3811 complete(&ioc->config_cmds.done);
3814 case MPT2_IOC_DONE_RESET:
3815 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
3816 "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
3819 mpt2sas_scsih_reset_handler(ioc, reset_phase);
3820 mpt2sas_ctl_reset_handler(ioc, reset_phase);
3824 * _wait_for_commands_to_complete - reset controller
3825 * @ioc: Pointer to MPT_ADAPTER structure
3826 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3828 * This function waiting(3s) for all pending commands to complete
3829 * prior to putting controller in reset.
3832 _wait_for_commands_to_complete(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
3835 unsigned long flags;
3838 ioc->pending_io_count = 0;
3839 if (sleep_flag != CAN_SLEEP)
3842 ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
3843 if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL)
3846 /* pending command count */
3847 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
3848 for (i = 0; i < ioc->scsiio_depth; i++)
3849 if (ioc->scsi_lookup[i].cb_idx != 0xFF)
3850 ioc->pending_io_count++;
3851 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
3853 if (!ioc->pending_io_count)
3856 /* wait for pending commands to complete */
3857 wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ);
3861 * mpt2sas_base_hard_reset_handler - reset controller
3862 * @ioc: Pointer to MPT_ADAPTER structure
3863 * @sleep_flag: CAN_SLEEP or NO_SLEEP
3864 * @type: FORCE_BIG_HAMMER or SOFT_RESET
3866 * Returns 0 for success, non-zero for failure.
3869 mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
3870 enum reset_type type)
3873 unsigned long flags;
3875 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
3878 if (ioc->pci_error_recovery) {
3879 printk(MPT2SAS_ERR_FMT "%s: pci error recovery reset\n",
3880 ioc->name, __func__);
3885 if (mpt2sas_fwfault_debug)
3886 mpt2sas_halt_firmware(ioc);
3888 /* TODO - What we really should be doing is pulling
3889 * out all the code associated with NO_SLEEP; its never used.
3890 * That is legacy code from mpt fusion driver, ported over.
3891 * I will leave this BUG_ON here for now till its been resolved.
3893 BUG_ON(sleep_flag == NO_SLEEP);
3895 /* wait for an active reset in progress to complete */
3896 if (!mutex_trylock(&ioc->reset_in_progress_mutex)) {
3899 } while (ioc->shost_recovery == 1);
3900 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,
3902 return ioc->ioc_reset_in_progress_status;
3905 spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
3906 ioc->shost_recovery = 1;
3907 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
3909 _base_reset_handler(ioc, MPT2_IOC_PRE_RESET);
3910 _wait_for_commands_to_complete(ioc, sleep_flag);
3911 _base_mask_interrupts(ioc);
3912 r = _base_make_ioc_ready(ioc, sleep_flag, type);
3915 _base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
3916 r = _base_make_ioc_operational(ioc, sleep_flag);
3918 _base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
3920 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %s\n",
3921 ioc->name, __func__, ((r == 0) ? "SUCCESS" : "FAILED")));
3923 spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
3924 ioc->ioc_reset_in_progress_status = r;
3925 ioc->shost_recovery = 0;
3926 complete(&ioc->shost_recovery_done);
3927 spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
3928 mutex_unlock(&ioc->reset_in_progress_mutex);
3930 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit\n", ioc->name,