2 * scsi.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
4 * Copyright (C) 2002, 2003 Christoph Hellwig
6 * generic mid-level SCSI driver
7 * Initial versions: Drew Eckhardt
8 * Subsequent revisions: Eric Youngdale
12 * Bug correction thanks go to :
13 * Rik Faith <faith@cs.unc.edu>
14 * Tommy Thorn <tthorn>
15 * Thomas Wuensche <tw@fgb1.fgb.mw.tu-muenchen.de>
17 * Modified by Eric Youngdale eric@andante.org or ericy@gnu.ai.mit.edu to
18 * add scatter-gather, multiple outstanding request, and other
21 * Native multichannel, wide scsi, /proc/scsi and hot plugging
22 * support added by Michael Neuffer <mike@i-connect.net>
24 * Added request_module("scsi_hostadapter") for kerneld:
25 * (Put an "alias scsi_hostadapter your_hostadapter" in /etc/modprobe.conf)
26 * Bjorn Ekwall <bj0rn@blox.se>
29 * Major improvements to the timeout, abort, and reset processing,
30 * as well as performance modifications for large queue depths by
31 * Leonard N. Zubkoff <lnz@dandelion.com>
33 * Converted cli() code to spinlocks, Ingo Molnar
35 * Jiffies wrap fixes (host->resetting), 3 Dec 1998 Andrea Arcangeli
37 * out_of_space hacks, D. Gilbert (dpg) 990608
40 #include <linux/module.h>
41 #include <linux/moduleparam.h>
42 #include <linux/kernel.h>
43 #include <linux/timer.h>
44 #include <linux/string.h>
45 #include <linux/slab.h>
46 #include <linux/blkdev.h>
47 #include <linux/delay.h>
48 #include <linux/init.h>
49 #include <linux/completion.h>
50 #include <linux/unistd.h>
51 #include <linux/spinlock.h>
52 #include <linux/kmod.h>
53 #include <linux/interrupt.h>
54 #include <linux/notifier.h>
55 #include <linux/cpu.h>
56 #include <linux/mutex.h>
57 #include <linux/async.h>
58 #include <asm/unaligned.h>
60 #include <scsi/scsi.h>
61 #include <scsi/scsi_cmnd.h>
62 #include <scsi/scsi_dbg.h>
63 #include <scsi/scsi_device.h>
64 #include <scsi/scsi_driver.h>
65 #include <scsi/scsi_eh.h>
66 #include <scsi/scsi_host.h>
67 #include <scsi/scsi_tcq.h>
69 #include "scsi_priv.h"
70 #include "scsi_logging.h"
72 #define CREATE_TRACE_POINTS
73 #include <trace/events/scsi.h>
76 * Definitions and constants.
80 * Note - the initial logging level can be set here to log events at boot time.
81 * After the system is up, you may enable logging via the /proc interface.
83 unsigned int scsi_logging_level;
84 #if defined(CONFIG_SCSI_LOGGING)
85 EXPORT_SYMBOL(scsi_logging_level);
88 /* sd, scsi core and power management need to coordinate flushing async actions */
89 ASYNC_DOMAIN(scsi_sd_probe_domain);
90 EXPORT_SYMBOL(scsi_sd_probe_domain);
93 * Separate domain (from scsi_sd_probe_domain) to maximize the benefit of
94 * asynchronous system resume operations. It is marked 'exclusive' to avoid
95 * being included in the async_synchronize_full() that is invoked by
98 ASYNC_DOMAIN_EXCLUSIVE(scsi_sd_pm_domain);
99 EXPORT_SYMBOL(scsi_sd_pm_domain);
101 /* NB: These are exposed through /proc/scsi/scsi and form part of the ABI.
102 * You may not alter any existing entry (although adding new ones is
103 * encouraged once assigned by ANSI/INCITS T10
105 static const char *const scsi_device_types[] = {
130 * scsi_device_type - Return 17 char string indicating device type.
131 * @type: type number to look up
134 const char * scsi_device_type(unsigned type)
137 return "Well-known LUN ";
140 if (type >= ARRAY_SIZE(scsi_device_types))
142 return scsi_device_types[type];
145 EXPORT_SYMBOL(scsi_device_type);
147 struct scsi_host_cmd_pool {
148 struct kmem_cache *cmd_slab;
149 struct kmem_cache *sense_slab;
153 unsigned int slab_flags;
157 static struct scsi_host_cmd_pool scsi_cmd_pool = {
158 .cmd_name = "scsi_cmd_cache",
159 .sense_name = "scsi_sense_cache",
160 .slab_flags = SLAB_HWCACHE_ALIGN,
163 static struct scsi_host_cmd_pool scsi_cmd_dma_pool = {
164 .cmd_name = "scsi_cmd_cache(DMA)",
165 .sense_name = "scsi_sense_cache(DMA)",
166 .slab_flags = SLAB_HWCACHE_ALIGN|SLAB_CACHE_DMA,
167 .gfp_mask = __GFP_DMA,
170 static DEFINE_MUTEX(host_cmd_pool_mutex);
173 * scsi_host_free_command - internal function to release a command
174 * @shost: host to free the command for
175 * @cmd: command to release
177 * the command must previously have been allocated by
178 * scsi_host_alloc_command.
181 scsi_host_free_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
183 struct scsi_host_cmd_pool *pool = shost->cmd_pool;
186 kmem_cache_free(scsi_sdb_cache, cmd->prot_sdb);
187 kmem_cache_free(pool->sense_slab, cmd->sense_buffer);
188 kmem_cache_free(pool->cmd_slab, cmd);
192 * scsi_host_alloc_command - internal function to allocate command
193 * @shost: SCSI host whose pool to allocate from
194 * @gfp_mask: mask for the allocation
196 * Returns a fully allocated command with sense buffer and protection
197 * data buffer (where applicable) or NULL on failure
199 static struct scsi_cmnd *
200 scsi_host_alloc_command(struct Scsi_Host *shost, gfp_t gfp_mask)
202 struct scsi_host_cmd_pool *pool = shost->cmd_pool;
203 struct scsi_cmnd *cmd;
205 cmd = kmem_cache_zalloc(pool->cmd_slab, gfp_mask | pool->gfp_mask);
209 cmd->sense_buffer = kmem_cache_alloc(pool->sense_slab,
210 gfp_mask | pool->gfp_mask);
211 if (!cmd->sense_buffer)
214 if (scsi_host_get_prot(shost) >= SHOST_DIX_TYPE0_PROTECTION) {
215 cmd->prot_sdb = kmem_cache_zalloc(scsi_sdb_cache, gfp_mask);
217 goto fail_free_sense;
223 kmem_cache_free(pool->sense_slab, cmd->sense_buffer);
225 kmem_cache_free(pool->cmd_slab, cmd);
231 * __scsi_get_command - Allocate a struct scsi_cmnd
232 * @shost: host to transmit command
233 * @gfp_mask: allocation mask
235 * Description: allocate a struct scsi_cmd from host's slab, recycling from the
236 * host's free_list if necessary.
238 static struct scsi_cmnd *
239 __scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
241 struct scsi_cmnd *cmd = scsi_host_alloc_command(shost, gfp_mask);
243 if (unlikely(!cmd)) {
246 spin_lock_irqsave(&shost->free_list_lock, flags);
247 if (likely(!list_empty(&shost->free_list))) {
248 cmd = list_entry(shost->free_list.next,
249 struct scsi_cmnd, list);
250 list_del_init(&cmd->list);
252 spin_unlock_irqrestore(&shost->free_list_lock, flags);
257 buf = cmd->sense_buffer;
258 prot = cmd->prot_sdb;
260 memset(cmd, 0, sizeof(*cmd));
262 cmd->sense_buffer = buf;
263 cmd->prot_sdb = prot;
271 * scsi_get_command - Allocate and setup a scsi command block
272 * @dev: parent scsi device
273 * @gfp_mask: allocator flags
275 * Returns: The allocated scsi command structure.
277 struct scsi_cmnd *scsi_get_command(struct scsi_device *dev, gfp_t gfp_mask)
279 struct scsi_cmnd *cmd = __scsi_get_command(dev->host, gfp_mask);
282 if (unlikely(cmd == NULL))
286 INIT_LIST_HEAD(&cmd->list);
287 INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler);
288 spin_lock_irqsave(&dev->list_lock, flags);
289 list_add_tail(&cmd->list, &dev->cmd_list);
290 spin_unlock_irqrestore(&dev->list_lock, flags);
291 cmd->jiffies_at_alloc = jiffies;
296 * __scsi_put_command - Free a struct scsi_cmnd
298 * @cmd: Command to free
300 static void __scsi_put_command(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
304 if (unlikely(list_empty(&shost->free_list))) {
305 spin_lock_irqsave(&shost->free_list_lock, flags);
306 if (list_empty(&shost->free_list)) {
307 list_add(&cmd->list, &shost->free_list);
310 spin_unlock_irqrestore(&shost->free_list_lock, flags);
313 if (likely(cmd != NULL))
314 scsi_host_free_command(shost, cmd);
318 * scsi_put_command - Free a scsi command block
319 * @cmd: command block to free
323 * Notes: The command must not belong to any lists.
325 void scsi_put_command(struct scsi_cmnd *cmd)
329 /* serious error if the command hasn't come from a device list */
330 spin_lock_irqsave(&cmd->device->list_lock, flags);
331 BUG_ON(list_empty(&cmd->list));
332 list_del_init(&cmd->list);
333 spin_unlock_irqrestore(&cmd->device->list_lock, flags);
335 BUG_ON(delayed_work_pending(&cmd->abort_work));
337 __scsi_put_command(cmd->device->host, cmd);
340 static struct scsi_host_cmd_pool *
341 scsi_find_host_cmd_pool(struct Scsi_Host *shost)
343 if (shost->hostt->cmd_size)
344 return shost->hostt->cmd_pool;
345 if (shost->unchecked_isa_dma)
346 return &scsi_cmd_dma_pool;
347 return &scsi_cmd_pool;
351 scsi_free_host_cmd_pool(struct scsi_host_cmd_pool *pool)
353 kfree(pool->sense_name);
354 kfree(pool->cmd_name);
358 static struct scsi_host_cmd_pool *
359 scsi_alloc_host_cmd_pool(struct Scsi_Host *shost)
361 struct scsi_host_template *hostt = shost->hostt;
362 struct scsi_host_cmd_pool *pool;
364 pool = kzalloc(sizeof(*pool), GFP_KERNEL);
368 pool->cmd_name = kasprintf(GFP_KERNEL, "%s_cmd", hostt->proc_name);
369 pool->sense_name = kasprintf(GFP_KERNEL, "%s_sense", hostt->proc_name);
370 if (!pool->cmd_name || !pool->sense_name) {
371 scsi_free_host_cmd_pool(pool);
375 pool->slab_flags = SLAB_HWCACHE_ALIGN;
376 if (shost->unchecked_isa_dma) {
377 pool->slab_flags |= SLAB_CACHE_DMA;
378 pool->gfp_mask = __GFP_DMA;
383 static struct scsi_host_cmd_pool *
384 scsi_get_host_cmd_pool(struct Scsi_Host *shost)
386 struct scsi_host_template *hostt = shost->hostt;
387 struct scsi_host_cmd_pool *retval = NULL, *pool;
388 size_t cmd_size = sizeof(struct scsi_cmnd) + hostt->cmd_size;
391 * Select a command slab for this host and create it if not
394 mutex_lock(&host_cmd_pool_mutex);
395 pool = scsi_find_host_cmd_pool(shost);
397 pool = scsi_alloc_host_cmd_pool(shost);
403 pool->cmd_slab = kmem_cache_create(pool->cmd_name, cmd_size, 0,
404 pool->slab_flags, NULL);
408 pool->sense_slab = kmem_cache_create(pool->sense_name,
409 SCSI_SENSE_BUFFERSIZE, 0,
410 pool->slab_flags, NULL);
411 if (!pool->sense_slab)
418 mutex_unlock(&host_cmd_pool_mutex);
422 kmem_cache_destroy(pool->cmd_slab);
425 scsi_free_host_cmd_pool(pool);
429 static void scsi_put_host_cmd_pool(struct Scsi_Host *shost)
431 struct scsi_host_template *hostt = shost->hostt;
432 struct scsi_host_cmd_pool *pool;
434 mutex_lock(&host_cmd_pool_mutex);
435 pool = scsi_find_host_cmd_pool(shost);
438 * This may happen if a driver has a mismatched get and put
439 * of the command pool; the driver should be implicated in
442 BUG_ON(pool->users == 0);
444 if (!--pool->users) {
445 kmem_cache_destroy(pool->cmd_slab);
446 kmem_cache_destroy(pool->sense_slab);
448 scsi_free_host_cmd_pool(pool);
450 mutex_unlock(&host_cmd_pool_mutex);
454 * scsi_setup_command_freelist - Setup the command freelist for a scsi host.
455 * @shost: host to allocate the freelist for.
457 * Description: The command freelist protects against system-wide out of memory
458 * deadlock by preallocating one SCSI command structure for each host, so the
459 * system can always write to a swap file on a device associated with that host.
463 int scsi_setup_command_freelist(struct Scsi_Host *shost)
465 const gfp_t gfp_mask = shost->unchecked_isa_dma ? GFP_DMA : GFP_KERNEL;
466 struct scsi_cmnd *cmd;
468 spin_lock_init(&shost->free_list_lock);
469 INIT_LIST_HEAD(&shost->free_list);
471 shost->cmd_pool = scsi_get_host_cmd_pool(shost);
472 if (!shost->cmd_pool)
476 * Get one backup command for this host.
478 cmd = scsi_host_alloc_command(shost, gfp_mask);
480 scsi_put_host_cmd_pool(shost);
481 shost->cmd_pool = NULL;
484 list_add(&cmd->list, &shost->free_list);
489 * scsi_destroy_command_freelist - Release the command freelist for a scsi host.
490 * @shost: host whose freelist is going to be destroyed
492 void scsi_destroy_command_freelist(struct Scsi_Host *shost)
495 * If cmd_pool is NULL the free list was not initialized, so
496 * do not attempt to release resources.
498 if (!shost->cmd_pool)
501 while (!list_empty(&shost->free_list)) {
502 struct scsi_cmnd *cmd;
504 cmd = list_entry(shost->free_list.next, struct scsi_cmnd, list);
505 list_del_init(&cmd->list);
506 scsi_host_free_command(shost, cmd);
508 shost->cmd_pool = NULL;
509 scsi_put_host_cmd_pool(shost);
512 #ifdef CONFIG_SCSI_LOGGING
513 void scsi_log_send(struct scsi_cmnd *cmd)
518 * If ML QUEUE log level is greater than or equal to:
520 * 1: nothing (match completion)
522 * 2: log opcode + command of all commands
524 * 3: same as 2 plus dump cmd address
526 * 4: same as 3 plus dump extra junk
528 if (unlikely(scsi_logging_level)) {
529 level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
530 SCSI_LOG_MLQUEUE_BITS);
532 scmd_printk(KERN_INFO, cmd, "Send: ");
534 printk("0x%p ", cmd);
536 scsi_print_command(cmd);
538 printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
539 " queuecommand 0x%p\n",
540 scsi_sglist(cmd), scsi_bufflen(cmd),
541 cmd->device->host->hostt->queuecommand);
548 void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
553 * If ML COMPLETE log level is greater than or equal to:
555 * 1: log disposition, result, opcode + command, and conditionally
556 * sense data for failures or non SUCCESS dispositions.
558 * 2: same as 1 but for all command completions.
560 * 3: same as 2 plus dump cmd address
562 * 4: same as 3 plus dump extra junk
564 if (unlikely(scsi_logging_level)) {
565 level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
566 SCSI_LOG_MLCOMPLETE_BITS);
567 if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
569 scmd_printk(KERN_INFO, cmd, "Done: ");
571 printk("0x%p ", cmd);
573 * Dump truncated values, so we usually fit within
576 switch (disposition) {
591 * If called via scsi_times_out.
598 scsi_print_result(cmd);
599 scsi_print_command(cmd);
600 if (status_byte(cmd->result) & CHECK_CONDITION)
601 scsi_print_sense("", cmd);
603 scmd_printk(KERN_INFO, cmd,
604 "scsi host busy %d failed %d\n",
605 atomic_read(&cmd->device->host->host_busy),
606 cmd->device->host->host_failed);
613 * scsi_cmd_get_serial - Assign a serial number to a command
614 * @host: the scsi host
615 * @cmd: command to assign serial number to
617 * Description: a serial number identifies a request for error recovery
618 * and debugging purposes. Protected by the Host_Lock of host.
620 void scsi_cmd_get_serial(struct Scsi_Host *host, struct scsi_cmnd *cmd)
622 cmd->serial_number = host->cmd_serial_number++;
623 if (cmd->serial_number == 0)
624 cmd->serial_number = host->cmd_serial_number++;
626 EXPORT_SYMBOL(scsi_cmd_get_serial);
629 * scsi_dispatch_command - Dispatch a command to the low-level driver.
630 * @cmd: command block we are dispatching.
632 * Return: nonzero return request was rejected and device's queue needs to be
635 int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
637 struct Scsi_Host *host = cmd->device->host;
640 atomic_inc(&cmd->device->iorequest_cnt);
642 /* check if the device is still usable */
643 if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
644 /* in SDEV_DEL we error all commands. DID_NO_CONNECT
645 * returns an immediate error upwards, and signals
646 * that the device is no longer present */
647 cmd->result = DID_NO_CONNECT << 16;
651 /* Check to see if the scsi lld made this device blocked. */
652 if (unlikely(scsi_device_blocked(cmd->device))) {
654 * in blocked state, the command is just put back on
655 * the device queue. The suspend state has already
656 * blocked the queue so future requests should not
657 * occur until the device transitions out of the
660 SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
661 "queuecommand : device blocked\n"));
662 return SCSI_MLQUEUE_DEVICE_BUSY;
666 * If SCSI-2 or lower, store the LUN value in cmnd.
668 if (cmd->device->scsi_level <= SCSI_2 &&
669 cmd->device->scsi_level != SCSI_UNKNOWN) {
670 cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
671 (cmd->device->lun << 5 & 0xe0);
677 * Before we queue this command, check if the command
678 * length exceeds what the host adapter can handle.
680 if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
681 SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
682 "queuecommand : command too long. "
683 "cdb_size=%d host->max_cmd_len=%d\n",
684 cmd->cmd_len, cmd->device->host->max_cmd_len));
685 cmd->result = (DID_ABORT << 16);
689 if (unlikely(host->shost_state == SHOST_DEL)) {
690 cmd->result = (DID_NO_CONNECT << 16);
695 trace_scsi_dispatch_cmd_start(cmd);
696 rtn = host->hostt->queuecommand(host, cmd);
698 trace_scsi_dispatch_cmd_error(cmd, rtn);
699 if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
700 rtn != SCSI_MLQUEUE_TARGET_BUSY)
701 rtn = SCSI_MLQUEUE_HOST_BUSY;
703 SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
704 "queuecommand : request rejected\n"));
714 * scsi_finish_command - cleanup and pass command back to upper layer
717 * Description: Pass command off to upper layer for finishing of I/O
718 * request, waking processes that are waiting on results,
721 void scsi_finish_command(struct scsi_cmnd *cmd)
723 struct scsi_device *sdev = cmd->device;
724 struct scsi_target *starget = scsi_target(sdev);
725 struct Scsi_Host *shost = sdev->host;
726 struct scsi_driver *drv;
727 unsigned int good_bytes;
729 scsi_device_unbusy(sdev);
732 * Clear the flags that say that the device/target/host is no longer
733 * capable of accepting new commands.
735 if (atomic_read(&shost->host_blocked))
736 atomic_set(&shost->host_blocked, 0);
737 if (atomic_read(&starget->target_blocked))
738 atomic_set(&starget->target_blocked, 0);
739 if (atomic_read(&sdev->device_blocked))
740 atomic_set(&sdev->device_blocked, 0);
743 * If we have valid sense information, then some kind of recovery
744 * must have taken place. Make a note of this.
746 if (SCSI_SENSE_VALID(cmd))
747 cmd->result |= (DRIVER_SENSE << 24);
749 SCSI_LOG_MLCOMPLETE(4, sdev_printk(KERN_INFO, sdev,
750 "Notifying upper driver of completion "
751 "(result %x)\n", cmd->result));
753 good_bytes = scsi_bufflen(cmd);
754 if (cmd->request->cmd_type != REQ_TYPE_BLOCK_PC) {
755 int old_good_bytes = good_bytes;
756 drv = scsi_cmd_to_driver(cmd);
758 good_bytes = drv->done(cmd);
760 * USB may not give sense identifying bad sector and
761 * simply return a residue instead, so subtract off the
762 * residue if drv->done() error processing indicates no
763 * change to the completion length.
765 if (good_bytes == old_good_bytes)
766 good_bytes -= scsi_get_resid(cmd);
768 scsi_io_completion(cmd, good_bytes);
772 * scsi_adjust_queue_depth - Let low level drivers change a device's queue depth
773 * @sdev: SCSI Device in question
774 * @tagged: Do we use tagged queueing (non-0) or do we treat
775 * this device as an untagged device (0)
776 * @tags: Number of tags allowed if tagged queueing enabled,
777 * or number of commands the low level driver can
778 * queue up in non-tagged mode (as per cmd_per_lun).
782 * Lock Status: None held on entry
784 * Notes: Low level drivers may call this at any time and we will do
785 * the right thing depending on whether or not the device is
786 * currently active and whether or not it even has the
787 * command blocks built yet.
789 void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
794 * refuse to set tagged depth to an unworkable size
799 spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
802 * Check to see if the queue is managed by the block layer.
803 * If it is, and we fail to adjust the depth, exit.
805 * Do not resize the tag map if it is a host wide share bqt,
806 * because the size should be the hosts's can_queue. If there
807 * is more IO than the LLD's can_queue (so there are not enuogh
808 * tags) request_fn's host queue ready check will handle it.
810 if (!shost_use_blk_mq(sdev->host) && !sdev->host->bqt) {
811 if (blk_queue_tagged(sdev->request_queue) &&
812 blk_queue_resize_tags(sdev->request_queue, tags) != 0)
816 sdev->queue_depth = tags;
819 sdev->ordered_tags = 0;
820 sdev->simple_tags = 0;
822 case MSG_ORDERED_TAG:
823 sdev->ordered_tags = 1;
824 sdev->simple_tags = 1;
827 sdev->ordered_tags = 0;
828 sdev->simple_tags = 1;
831 sdev->ordered_tags = 0;
832 sdev->simple_tags = 0;
833 sdev_printk(KERN_WARNING, sdev,
834 "scsi_adjust_queue_depth, bad queue type, "
838 spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
840 EXPORT_SYMBOL(scsi_adjust_queue_depth);
843 * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth
844 * @sdev: SCSI Device in question
845 * @depth: Current number of outstanding SCSI commands on this device,
846 * not counting the one returned as QUEUE_FULL.
848 * Description: This function will track successive QUEUE_FULL events on a
849 * specific SCSI device to determine if and when there is a
850 * need to adjust the queue depth on the device.
852 * Returns: 0 - No change needed, >0 - Adjust queue depth to this new depth,
853 * -1 - Drop back to untagged operation using host->cmd_per_lun
854 * as the untagged command depth
856 * Lock Status: None held on entry
858 * Notes: Low level drivers may call this at any time and we will do
859 * "The Right Thing." We are interrupt context safe.
861 int scsi_track_queue_full(struct scsi_device *sdev, int depth)
865 * Don't let QUEUE_FULLs on the same
866 * jiffies count, they could all be from
869 if ((jiffies >> 4) == (sdev->last_queue_full_time >> 4))
872 sdev->last_queue_full_time = jiffies;
873 if (sdev->last_queue_full_depth != depth) {
874 sdev->last_queue_full_count = 1;
875 sdev->last_queue_full_depth = depth;
877 sdev->last_queue_full_count++;
880 if (sdev->last_queue_full_count <= 10)
882 if (sdev->last_queue_full_depth < 8) {
883 /* Drop back to untagged */
884 scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
888 if (sdev->ordered_tags)
889 scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
891 scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
894 EXPORT_SYMBOL(scsi_track_queue_full);
897 * scsi_vpd_inquiry - Request a device provide us with a VPD page
898 * @sdev: The device to ask
899 * @buffer: Where to put the result
900 * @page: Which Vital Product Data to return
901 * @len: The length of the buffer
903 * This is an internal helper function. You probably want to use
904 * scsi_get_vpd_page instead.
906 * Returns size of the vpd page on success or a negative error number.
908 static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
909 u8 page, unsigned len)
912 unsigned char cmd[16];
918 cmd[1] = 1; /* EVPD */
922 cmd[5] = 0; /* Control byte */
925 * I'm not convinced we need to try quite this hard to get VPD, but
926 * all the existing users tried this hard.
928 result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer,
929 len, NULL, 30 * HZ, 3, NULL);
933 /* Sanity check that we got the page back that we asked for */
934 if (buffer[1] != page)
937 return get_unaligned_be16(&buffer[2]) + 4;
941 * scsi_get_vpd_page - Get Vital Product Data from a SCSI device
942 * @sdev: The device to ask
943 * @page: Which Vital Product Data to return
944 * @buf: where to store the VPD
945 * @buf_len: number of bytes in the VPD buffer area
947 * SCSI devices may optionally supply Vital Product Data. Each 'page'
948 * of VPD is defined in the appropriate SCSI document (eg SPC, SBC).
949 * If the device supports this VPD page, this routine returns a pointer
950 * to a buffer containing the data from that page. The caller is
951 * responsible for calling kfree() on this pointer when it is no longer
952 * needed. If we cannot retrieve the VPD page this routine returns %NULL.
954 int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf,
959 if (sdev->skip_vpd_pages)
962 /* Ask for all the pages supported by this device */
963 result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
967 /* If the user actually wanted this page, we can skip the rest */
971 for (i = 4; i < min(result, buf_len); i++)
975 if (i < result && i >= buf_len)
976 /* ran off the end of the buffer, give us benefit of doubt */
978 /* The device claims it doesn't support the requested page */
982 result = scsi_vpd_inquiry(sdev, buf, page, buf_len);
991 EXPORT_SYMBOL_GPL(scsi_get_vpd_page);
994 * scsi_attach_vpd - Attach Vital Product Data to a SCSI device structure
995 * @sdev: The device to ask
997 * Attach the 'Device Identification' VPD page (0x83) and the
998 * 'Unit Serial Number' VPD page (0x80) to a SCSI device
999 * structure. This information can be used to identify the device
1002 void scsi_attach_vpd(struct scsi_device *sdev)
1005 int vpd_len = SCSI_VPD_PG_LEN;
1006 int pg80_supported = 0;
1007 int pg83_supported = 0;
1008 unsigned char *vpd_buf;
1010 if (sdev->skip_vpd_pages)
1013 vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
1017 /* Ask for all the pages supported by this device */
1018 result = scsi_vpd_inquiry(sdev, vpd_buf, 0, vpd_len);
1023 if (result > vpd_len) {
1029 for (i = 4; i < result; i++) {
1030 if (vpd_buf[i] == 0x80)
1032 if (vpd_buf[i] == 0x83)
1036 vpd_len = SCSI_VPD_PG_LEN;
1038 if (pg80_supported) {
1040 vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
1044 result = scsi_vpd_inquiry(sdev, vpd_buf, 0x80, vpd_len);
1049 if (result > vpd_len) {
1054 sdev->vpd_pg80_len = result;
1055 sdev->vpd_pg80 = vpd_buf;
1056 vpd_len = SCSI_VPD_PG_LEN;
1059 if (pg83_supported) {
1061 vpd_buf = kmalloc(vpd_len, GFP_KERNEL);
1065 result = scsi_vpd_inquiry(sdev, vpd_buf, 0x83, vpd_len);
1070 if (result > vpd_len) {
1075 sdev->vpd_pg83_len = result;
1076 sdev->vpd_pg83 = vpd_buf;
1081 * scsi_report_opcode - Find out if a given command opcode is supported
1082 * @sdev: scsi device to query
1083 * @buffer: scratch buffer (must be at least 20 bytes long)
1084 * @len: length of buffer
1085 * @opcode: opcode for command to look up
1087 * Uses the REPORT SUPPORTED OPERATION CODES to look up the given
1088 * opcode. Returns -EINVAL if RSOC fails, 0 if the command opcode is
1089 * unsupported and 1 if the device claims to support the command.
1091 int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
1092 unsigned int len, unsigned char opcode)
1094 unsigned char cmd[16];
1095 struct scsi_sense_hdr sshdr;
1098 if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
1102 cmd[0] = MAINTENANCE_IN;
1103 cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
1104 cmd[2] = 1; /* One command format */
1106 put_unaligned_be32(len, &cmd[6]);
1107 memset(buffer, 0, len);
1109 result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len,
1110 &sshdr, 30 * HZ, 3, NULL);
1112 if (result && scsi_sense_valid(&sshdr) &&
1113 sshdr.sense_key == ILLEGAL_REQUEST &&
1114 (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
1117 if ((buffer[1] & 3) == 3) /* Command supported */
1122 EXPORT_SYMBOL(scsi_report_opcode);
1125 * scsi_device_get - get an additional reference to a scsi_device
1126 * @sdev: device to get a reference to
1128 * Description: Gets a reference to the scsi_device and increments the use count
1129 * of the underlying LLDD module. You must hold host_lock of the
1130 * parent Scsi_Host or already have a reference when calling this.
1132 int scsi_device_get(struct scsi_device *sdev)
1134 if (sdev->sdev_state == SDEV_DEL)
1136 if (!get_device(&sdev->sdev_gendev))
1138 /* We can fail this if we're doing SCSI operations
1139 * from module exit (like cache flush) */
1140 try_module_get(sdev->host->hostt->module);
1144 EXPORT_SYMBOL(scsi_device_get);
1147 * scsi_device_put - release a reference to a scsi_device
1148 * @sdev: device to release a reference on.
1150 * Description: Release a reference to the scsi_device and decrements the use
1151 * count of the underlying LLDD module. The device is freed once the last
1154 void scsi_device_put(struct scsi_device *sdev)
1156 #ifdef CONFIG_MODULE_UNLOAD
1157 struct module *module = sdev->host->hostt->module;
1159 /* The module refcount will be zero if scsi_device_get()
1160 * was called from a module removal routine */
1161 if (module && module_refcount(module) != 0)
1164 put_device(&sdev->sdev_gendev);
1166 EXPORT_SYMBOL(scsi_device_put);
1168 /* helper for shost_for_each_device, see that for documentation */
1169 struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost,
1170 struct scsi_device *prev)
1172 struct list_head *list = (prev ? &prev->siblings : &shost->__devices);
1173 struct scsi_device *next = NULL;
1174 unsigned long flags;
1176 spin_lock_irqsave(shost->host_lock, flags);
1177 while (list->next != &shost->__devices) {
1178 next = list_entry(list->next, struct scsi_device, siblings);
1179 /* skip devices that we can't get a reference to */
1180 if (!scsi_device_get(next))
1185 spin_unlock_irqrestore(shost->host_lock, flags);
1188 scsi_device_put(prev);
1191 EXPORT_SYMBOL(__scsi_iterate_devices);
1194 * starget_for_each_device - helper to walk all devices of a target
1195 * @starget: target whose devices we want to iterate over.
1196 * @data: Opaque passed to each function call.
1197 * @fn: Function to call on each device
1199 * This traverses over each device of @starget. The devices have
1200 * a reference that must be released by scsi_host_put when breaking
1203 void starget_for_each_device(struct scsi_target *starget, void *data,
1204 void (*fn)(struct scsi_device *, void *))
1206 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1207 struct scsi_device *sdev;
1209 shost_for_each_device(sdev, shost) {
1210 if ((sdev->channel == starget->channel) &&
1211 (sdev->id == starget->id))
1215 EXPORT_SYMBOL(starget_for_each_device);
1218 * __starget_for_each_device - helper to walk all devices of a target (UNLOCKED)
1219 * @starget: target whose devices we want to iterate over.
1220 * @data: parameter for callback @fn()
1221 * @fn: callback function that is invoked for each device
1223 * This traverses over each device of @starget. It does _not_
1224 * take a reference on the scsi_device, so the whole loop must be
1225 * protected by shost->host_lock.
1227 * Note: The only reason why drivers would want to use this is because
1228 * they need to access the device list in irq context. Otherwise you
1229 * really want to use starget_for_each_device instead.
1231 void __starget_for_each_device(struct scsi_target *starget, void *data,
1232 void (*fn)(struct scsi_device *, void *))
1234 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1235 struct scsi_device *sdev;
1237 __shost_for_each_device(sdev, shost) {
1238 if ((sdev->channel == starget->channel) &&
1239 (sdev->id == starget->id))
1243 EXPORT_SYMBOL(__starget_for_each_device);
1246 * __scsi_device_lookup_by_target - find a device given the target (UNLOCKED)
1247 * @starget: SCSI target pointer
1248 * @lun: SCSI Logical Unit Number
1250 * Description: Looks up the scsi_device with the specified @lun for a given
1251 * @starget. The returned scsi_device does not have an additional
1252 * reference. You must hold the host's host_lock over this call and
1253 * any access to the returned scsi_device. A scsi_device in state
1254 * SDEV_DEL is skipped.
1256 * Note: The only reason why drivers should use this is because
1257 * they need to access the device list in irq context. Otherwise you
1258 * really want to use scsi_device_lookup_by_target instead.
1260 struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget,
1263 struct scsi_device *sdev;
1265 list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
1266 if (sdev->sdev_state == SDEV_DEL)
1268 if (sdev->lun ==lun)
1274 EXPORT_SYMBOL(__scsi_device_lookup_by_target);
1277 * scsi_device_lookup_by_target - find a device given the target
1278 * @starget: SCSI target pointer
1279 * @lun: SCSI Logical Unit Number
1281 * Description: Looks up the scsi_device with the specified @lun for a given
1282 * @starget. The returned scsi_device has an additional reference that
1283 * needs to be released with scsi_device_put once you're done with it.
1285 struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
1288 struct scsi_device *sdev;
1289 struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
1290 unsigned long flags;
1292 spin_lock_irqsave(shost->host_lock, flags);
1293 sdev = __scsi_device_lookup_by_target(starget, lun);
1294 if (sdev && scsi_device_get(sdev))
1296 spin_unlock_irqrestore(shost->host_lock, flags);
1300 EXPORT_SYMBOL(scsi_device_lookup_by_target);
1303 * __scsi_device_lookup - find a device given the host (UNLOCKED)
1304 * @shost: SCSI host pointer
1305 * @channel: SCSI channel (zero if only one channel)
1306 * @id: SCSI target number (physical unit number)
1307 * @lun: SCSI Logical Unit Number
1309 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
1310 * for a given host. The returned scsi_device does not have an additional
1311 * reference. You must hold the host's host_lock over this call and any access
1312 * to the returned scsi_device.
1314 * Note: The only reason why drivers would want to use this is because
1315 * they need to access the device list in irq context. Otherwise you
1316 * really want to use scsi_device_lookup instead.
1318 struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost,
1319 uint channel, uint id, u64 lun)
1321 struct scsi_device *sdev;
1323 list_for_each_entry(sdev, &shost->__devices, siblings) {
1324 if (sdev->channel == channel && sdev->id == id &&
1331 EXPORT_SYMBOL(__scsi_device_lookup);
1334 * scsi_device_lookup - find a device given the host
1335 * @shost: SCSI host pointer
1336 * @channel: SCSI channel (zero if only one channel)
1337 * @id: SCSI target number (physical unit number)
1338 * @lun: SCSI Logical Unit Number
1340 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
1341 * for a given host. The returned scsi_device has an additional reference that
1342 * needs to be released with scsi_device_put once you're done with it.
1344 struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost,
1345 uint channel, uint id, u64 lun)
1347 struct scsi_device *sdev;
1348 unsigned long flags;
1350 spin_lock_irqsave(shost->host_lock, flags);
1351 sdev = __scsi_device_lookup(shost, channel, id, lun);
1352 if (sdev && scsi_device_get(sdev))
1354 spin_unlock_irqrestore(shost->host_lock, flags);
1358 EXPORT_SYMBOL(scsi_device_lookup);
1360 MODULE_DESCRIPTION("SCSI core");
1361 MODULE_LICENSE("GPL");
1363 module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
1364 MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");
1366 bool scsi_use_blk_mq = false;
1367 module_param_named(use_blk_mq, scsi_use_blk_mq, bool, S_IWUSR | S_IRUGO);
1369 static int __init init_scsi(void)
1373 error = scsi_init_queue();
1376 error = scsi_init_procfs();
1379 error = scsi_init_devinfo();
1381 goto cleanup_procfs;
1382 error = scsi_init_hosts();
1384 goto cleanup_devlist;
1385 error = scsi_init_sysctl();
1388 error = scsi_sysfs_register();
1390 goto cleanup_sysctl;
1392 scsi_netlink_init();
1394 printk(KERN_NOTICE "SCSI subsystem initialized\n");
1402 scsi_exit_devinfo();
1407 printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
1412 static void __exit exit_scsi(void)
1414 scsi_netlink_exit();
1415 scsi_sysfs_unregister();
1418 scsi_exit_devinfo();
1421 async_unregister_domain(&scsi_sd_probe_domain);
1424 subsys_initcall(init_scsi);
1425 module_exit(exit_scsi);