]> git.karo-electronics.de Git - mv-sheeva.git/blob - drivers/scsi/ufs/ufshci.h
Merge branch 'for-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
[mv-sheeva.git] / drivers / scsi / ufs / ufshci.h
1 /*
2  * Universal Flash Storage Host controller driver
3  *
4  * This code is based on drivers/scsi/ufs/ufshci.h
5  * Copyright (C) 2011-2012 Samsung India Software Operations
6  *
7  * Santosh Yaraganavi <santosh.sy@samsung.com>
8  * Vinayak Holikatti <h.vinayak@samsung.com>
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License
12  * as published by the Free Software Foundation; either version 2
13  * of the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * NO WARRANTY
21  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
22  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
23  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
24  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
25  * solely responsible for determining the appropriateness of using and
26  * distributing the Program and assumes all risks associated with its
27  * exercise of rights under this Agreement, including but not limited to
28  * the risks and costs of program errors, damage to or loss of data,
29  * programs or equipment, and unavailability or interruption of operations.
30
31  * DISCLAIMER OF LIABILITY
32  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
33  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
34  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
35  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
36  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
37  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
38  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
39
40  * You should have received a copy of the GNU General Public License
41  * along with this program; if not, write to the Free Software
42  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
43  * USA.
44  */
45
46 #ifndef _UFSHCI_H
47 #define _UFSHCI_H
48
49 enum {
50         TASK_REQ_UPIU_SIZE_DWORDS       = 8,
51         TASK_RSP_UPIU_SIZE_DWORDS       = 8,
52         ALIGNED_UPIU_SIZE               = 128,
53 };
54
55 /* UFSHCI Registers */
56 enum {
57         REG_CONTROLLER_CAPABILITIES             = 0x00,
58         REG_UFS_VERSION                         = 0x08,
59         REG_CONTROLLER_DEV_ID                   = 0x10,
60         REG_CONTROLLER_PROD_ID                  = 0x14,
61         REG_INTERRUPT_STATUS                    = 0x20,
62         REG_INTERRUPT_ENABLE                    = 0x24,
63         REG_CONTROLLER_STATUS                   = 0x30,
64         REG_CONTROLLER_ENABLE                   = 0x34,
65         REG_UIC_ERROR_CODE_PHY_ADAPTER_LAYER    = 0x38,
66         REG_UIC_ERROR_CODE_DATA_LINK_LAYER      = 0x3C,
67         REG_UIC_ERROR_CODE_NETWORK_LAYER        = 0x40,
68         REG_UIC_ERROR_CODE_TRANSPORT_LAYER      = 0x44,
69         REG_UIC_ERROR_CODE_DME                  = 0x48,
70         REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL    = 0x4C,
71         REG_UTP_TRANSFER_REQ_LIST_BASE_L        = 0x50,
72         REG_UTP_TRANSFER_REQ_LIST_BASE_H        = 0x54,
73         REG_UTP_TRANSFER_REQ_DOOR_BELL          = 0x58,
74         REG_UTP_TRANSFER_REQ_LIST_CLEAR         = 0x5C,
75         REG_UTP_TRANSFER_REQ_LIST_RUN_STOP      = 0x60,
76         REG_UTP_TASK_REQ_LIST_BASE_L            = 0x70,
77         REG_UTP_TASK_REQ_LIST_BASE_H            = 0x74,
78         REG_UTP_TASK_REQ_DOOR_BELL              = 0x78,
79         REG_UTP_TASK_REQ_LIST_CLEAR             = 0x7C,
80         REG_UTP_TASK_REQ_LIST_RUN_STOP          = 0x80,
81         REG_UIC_COMMAND                         = 0x90,
82         REG_UIC_COMMAND_ARG_1                   = 0x94,
83         REG_UIC_COMMAND_ARG_2                   = 0x98,
84         REG_UIC_COMMAND_ARG_3                   = 0x9C,
85 };
86
87 /* Controller capability masks */
88 enum {
89         MASK_TRANSFER_REQUESTS_SLOTS            = 0x0000001F,
90         MASK_TASK_MANAGEMENT_REQUEST_SLOTS      = 0x00070000,
91         MASK_64_ADDRESSING_SUPPORT              = 0x01000000,
92         MASK_OUT_OF_ORDER_DATA_DELIVERY_SUPPORT = 0x02000000,
93         MASK_UIC_DME_TEST_MODE_SUPPORT          = 0x04000000,
94 };
95
96 /* UFS Version 08h */
97 #define MINOR_VERSION_NUM_MASK          UFS_MASK(0xFFFF, 0)
98 #define MAJOR_VERSION_NUM_MASK          UFS_MASK(0xFFFF, 16)
99
100 /* Controller UFSHCI version */
101 enum {
102         UFSHCI_VERSION_10 = 0x00010000,
103         UFSHCI_VERSION_11 = 0x00010100,
104 };
105
106 /*
107  * HCDDID - Host Controller Identification Descriptor
108  *        - Device ID and Device Class 10h
109  */
110 #define DEVICE_CLASS    UFS_MASK(0xFFFF, 0)
111 #define DEVICE_ID       UFS_MASK(0xFF, 24)
112
113 /*
114  * HCPMID - Host Controller Identification Descriptor
115  *        - Product/Manufacturer ID  14h
116  */
117 #define MANUFACTURE_ID_MASK     UFS_MASK(0xFFFF, 0)
118 #define PRODUCT_ID_MASK         UFS_MASK(0xFFFF, 16)
119
120 #define UFS_BIT(x)      (1L << (x))
121
122 #define UTP_TRANSFER_REQ_COMPL                  UFS_BIT(0)
123 #define UIC_DME_END_PT_RESET                    UFS_BIT(1)
124 #define UIC_ERROR                               UFS_BIT(2)
125 #define UIC_TEST_MODE                           UFS_BIT(3)
126 #define UIC_POWER_MODE                          UFS_BIT(4)
127 #define UIC_HIBERNATE_EXIT                      UFS_BIT(5)
128 #define UIC_HIBERNATE_ENTER                     UFS_BIT(6)
129 #define UIC_LINK_LOST                           UFS_BIT(7)
130 #define UIC_LINK_STARTUP                        UFS_BIT(8)
131 #define UTP_TASK_REQ_COMPL                      UFS_BIT(9)
132 #define UIC_COMMAND_COMPL                       UFS_BIT(10)
133 #define DEVICE_FATAL_ERROR                      UFS_BIT(11)
134 #define CONTROLLER_FATAL_ERROR                  UFS_BIT(16)
135 #define SYSTEM_BUS_FATAL_ERROR                  UFS_BIT(17)
136
137 #define UFSHCD_ERROR_MASK       (UIC_ERROR |\
138                                 DEVICE_FATAL_ERROR |\
139                                 CONTROLLER_FATAL_ERROR |\
140                                 SYSTEM_BUS_FATAL_ERROR)
141
142 #define INT_FATAL_ERRORS        (DEVICE_FATAL_ERROR |\
143                                 CONTROLLER_FATAL_ERROR |\
144                                 SYSTEM_BUS_FATAL_ERROR)
145
146 /* HCS - Host Controller Status 30h */
147 #define DEVICE_PRESENT                          UFS_BIT(0)
148 #define UTP_TRANSFER_REQ_LIST_READY             UFS_BIT(1)
149 #define UTP_TASK_REQ_LIST_READY                 UFS_BIT(2)
150 #define UIC_COMMAND_READY                       UFS_BIT(3)
151 #define HOST_ERROR_INDICATOR                    UFS_BIT(4)
152 #define DEVICE_ERROR_INDICATOR                  UFS_BIT(5)
153 #define UIC_POWER_MODE_CHANGE_REQ_STATUS_MASK   UFS_MASK(0x7, 8)
154
155 /* HCE - Host Controller Enable 34h */
156 #define CONTROLLER_ENABLE       UFS_BIT(0)
157 #define CONTROLLER_DISABLE      0x0
158
159 /* UECPA - Host UIC Error Code PHY Adapter Layer 38h */
160 #define UIC_PHY_ADAPTER_LAYER_ERROR                     UFS_BIT(31)
161 #define UIC_PHY_ADAPTER_LAYER_ERROR_CODE_MASK           0x1F
162
163 /* UECDL - Host UIC Error Code Data Link Layer 3Ch */
164 #define UIC_DATA_LINK_LAYER_ERROR               UFS_BIT(31)
165 #define UIC_DATA_LINK_LAYER_ERROR_CODE_MASK     0x7FFF
166 #define UIC_DATA_LINK_LAYER_ERROR_PA_INIT       0x2000
167
168 /* UECN - Host UIC Error Code Network Layer 40h */
169 #define UIC_NETWORK_LAYER_ERROR                 UFS_BIT(31)
170 #define UIC_NETWORK_LAYER_ERROR_CODE_MASK       0x7
171
172 /* UECT - Host UIC Error Code Transport Layer 44h */
173 #define UIC_TRANSPORT_LAYER_ERROR               UFS_BIT(31)
174 #define UIC_TRANSPORT_LAYER_ERROR_CODE_MASK     0x7F
175
176 /* UECDME - Host UIC Error Code DME 48h */
177 #define UIC_DME_ERROR                   UFS_BIT(31)
178 #define UIC_DME_ERROR_CODE_MASK         0x1
179
180 #define INT_AGGR_TIMEOUT_VAL_MASK               0xFF
181 #define INT_AGGR_COUNTER_THRESHOLD_MASK         UFS_MASK(0x1F, 8)
182 #define INT_AGGR_COUNTER_AND_TIMER_RESET        UFS_BIT(16)
183 #define INT_AGGR_STATUS_BIT                     UFS_BIT(20)
184 #define INT_AGGR_PARAM_WRITE                    UFS_BIT(24)
185 #define INT_AGGR_ENABLE                         UFS_BIT(31)
186
187 /* UTRLRSR - UTP Transfer Request Run-Stop Register 60h */
188 #define UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT      UFS_BIT(0)
189
190 /* UTMRLRSR - UTP Task Management Request Run-Stop Register 80h */
191 #define UTP_TASK_REQ_LIST_RUN_STOP_BIT          UFS_BIT(0)
192
193 /* UICCMD - UIC Command */
194 #define COMMAND_OPCODE_MASK             0xFF
195 #define GEN_SELECTOR_INDEX_MASK         0xFFFF
196
197 #define MIB_ATTRIBUTE_MASK              UFS_MASK(0xFFFF, 16)
198 #define RESET_LEVEL                     0xFF
199
200 #define ATTR_SET_TYPE_MASK              UFS_MASK(0xFF, 16)
201 #define CONFIG_RESULT_CODE_MASK         0xFF
202 #define GENERIC_ERROR_CODE_MASK         0xFF
203
204 /* UIC Commands */
205 enum {
206         UIC_CMD_DME_GET                 = 0x01,
207         UIC_CMD_DME_SET                 = 0x02,
208         UIC_CMD_DME_PEER_GET            = 0x03,
209         UIC_CMD_DME_PEER_SET            = 0x04,
210         UIC_CMD_DME_POWERON             = 0x10,
211         UIC_CMD_DME_POWEROFF            = 0x11,
212         UIC_CMD_DME_ENABLE              = 0x12,
213         UIC_CMD_DME_RESET               = 0x14,
214         UIC_CMD_DME_END_PT_RST          = 0x15,
215         UIC_CMD_DME_LINK_STARTUP        = 0x16,
216         UIC_CMD_DME_HIBER_ENTER         = 0x17,
217         UIC_CMD_DME_HIBER_EXIT          = 0x18,
218         UIC_CMD_DME_TEST_MODE           = 0x1A,
219 };
220
221 /* UIC Config result code / Generic error code */
222 enum {
223         UIC_CMD_RESULT_SUCCESS                  = 0x00,
224         UIC_CMD_RESULT_INVALID_ATTR             = 0x01,
225         UIC_CMD_RESULT_FAILURE                  = 0x01,
226         UIC_CMD_RESULT_INVALID_ATTR_VALUE       = 0x02,
227         UIC_CMD_RESULT_READ_ONLY_ATTR           = 0x03,
228         UIC_CMD_RESULT_WRITE_ONLY_ATTR          = 0x04,
229         UIC_CMD_RESULT_BAD_INDEX                = 0x05,
230         UIC_CMD_RESULT_LOCKED_ATTR              = 0x06,
231         UIC_CMD_RESULT_BAD_TEST_FEATURE_INDEX   = 0x07,
232         UIC_CMD_RESULT_PEER_COMM_FAILURE        = 0x08,
233         UIC_CMD_RESULT_BUSY                     = 0x09,
234         UIC_CMD_RESULT_DME_FAILURE              = 0x0A,
235 };
236
237 #define MASK_UIC_COMMAND_RESULT                 0xFF
238
239 #define INT_AGGR_COUNTER_THRESHOLD_VALUE        (0x1F << 8)
240 #define INT_AGGR_TIMEOUT_VALUE                  (0x02)
241
242 /* Interrupt disable masks */
243 enum {
244         /* Interrupt disable mask for UFSHCI v1.0 */
245         INTERRUPT_DISABLE_MASK_10       = 0xFFFF,
246
247         /* Interrupt disable mask for UFSHCI v1.1 */
248         INTERRUPT_DISABLE_MASK_11       = 0x0,
249 };
250
251 /*
252  * Request Descriptor Definitions
253  */
254
255 /* Transfer request command type */
256 enum {
257         UTP_CMD_TYPE_SCSI               = 0x0,
258         UTP_CMD_TYPE_UFS                = 0x1,
259         UTP_CMD_TYPE_DEV_MANAGE         = 0x2,
260 };
261
262 enum {
263         UTP_SCSI_COMMAND                = 0x00000000,
264         UTP_NATIVE_UFS_COMMAND          = 0x10000000,
265         UTP_DEVICE_MANAGEMENT_FUNCTION  = 0x20000000,
266         UTP_REQ_DESC_INT_CMD            = 0x01000000,
267 };
268
269 /* UTP Transfer Request Data Direction (DD) */
270 enum {
271         UTP_NO_DATA_TRANSFER    = 0x00000000,
272         UTP_HOST_TO_DEVICE      = 0x02000000,
273         UTP_DEVICE_TO_HOST      = 0x04000000,
274 };
275
276 /* Overall command status values */
277 enum {
278         OCS_SUCCESS                     = 0x0,
279         OCS_INVALID_CMD_TABLE_ATTR      = 0x1,
280         OCS_INVALID_PRDT_ATTR           = 0x2,
281         OCS_MISMATCH_DATA_BUF_SIZE      = 0x3,
282         OCS_MISMATCH_RESP_UPIU_SIZE     = 0x4,
283         OCS_PEER_COMM_FAILURE           = 0x5,
284         OCS_ABORTED                     = 0x6,
285         OCS_FATAL_ERROR                 = 0x7,
286         OCS_INVALID_COMMAND_STATUS      = 0x0F,
287         MASK_OCS                        = 0x0F,
288 };
289
290 /**
291  * struct ufshcd_sg_entry - UFSHCI PRD Entry
292  * @base_addr: Lower 32bit physical address DW-0
293  * @upper_addr: Upper 32bit physical address DW-1
294  * @reserved: Reserved for future use DW-2
295  * @size: size of physical segment DW-3
296  */
297 struct ufshcd_sg_entry {
298         u32    base_addr;
299         u32    upper_addr;
300         u32    reserved;
301         u32    size;
302 };
303
304 /**
305  * struct utp_transfer_cmd_desc - UFS Command Descriptor structure
306  * @command_upiu: Command UPIU Frame address
307  * @response_upiu: Response UPIU Frame address
308  * @prd_table: Physical Region Descriptor
309  */
310 struct utp_transfer_cmd_desc {
311         u8 command_upiu[ALIGNED_UPIU_SIZE];
312         u8 response_upiu[ALIGNED_UPIU_SIZE];
313         struct ufshcd_sg_entry    prd_table[SG_ALL];
314 };
315
316 /**
317  * struct request_desc_header - Descriptor Header common to both UTRD and UTMRD
318  * @dword0: Descriptor Header DW0
319  * @dword1: Descriptor Header DW1
320  * @dword2: Descriptor Header DW2
321  * @dword3: Descriptor Header DW3
322  */
323 struct request_desc_header {
324         u32 dword_0;
325         u32 dword_1;
326         u32 dword_2;
327         u32 dword_3;
328 };
329
330 /**
331  * struct utp_transfer_req_desc - UTRD structure
332  * @header: UTRD header DW-0 to DW-3
333  * @command_desc_base_addr_lo: UCD base address low DW-4
334  * @command_desc_base_addr_hi: UCD base address high DW-5
335  * @response_upiu_length: response UPIU length DW-6
336  * @response_upiu_offset: response UPIU offset DW-6
337  * @prd_table_length: Physical region descriptor length DW-7
338  * @prd_table_offset: Physical region descriptor offset DW-7
339  */
340 struct utp_transfer_req_desc {
341
342         /* DW 0-3 */
343         struct request_desc_header header;
344
345         /* DW 4-5*/
346         u32  command_desc_base_addr_lo;
347         u32  command_desc_base_addr_hi;
348
349         /* DW 6 */
350         u16  response_upiu_length;
351         u16  response_upiu_offset;
352
353         /* DW 7 */
354         u16  prd_table_length;
355         u16  prd_table_offset;
356 };
357
358 /**
359  * struct utp_task_req_desc - UTMRD structure
360  * @header: UTMRD header DW-0 to DW-3
361  * @task_req_upiu: Pointer to task request UPIU DW-4 to DW-11
362  * @task_rsp_upiu: Pointer to task response UPIU DW12 to DW-19
363  */
364 struct utp_task_req_desc {
365
366         /* DW 0-3 */
367         struct request_desc_header header;
368
369         /* DW 4-11 */
370         u32 task_req_upiu[TASK_REQ_UPIU_SIZE_DWORDS];
371
372         /* DW 12-19 */
373         u32 task_rsp_upiu[TASK_RSP_UPIU_SIZE_DWORDS];
374 };
375
376 #endif /* End of Header */