1 /*======================================================================
3 A driver for PCMCIA serial devices
5 serial_cs.c 1.134 2002/05/04 05:48:53
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/sched.h>
39 #include <linux/ptrace.h>
40 #include <linux/slab.h>
41 #include <linux/string.h>
42 #include <linux/timer.h>
43 #include <linux/serial_core.h>
44 #include <linux/delay.h>
45 #include <linux/major.h>
47 #include <asm/system.h>
49 #include <pcmcia/cs_types.h>
50 #include <pcmcia/cs.h>
51 #include <pcmcia/cistpl.h>
52 #include <pcmcia/ciscode.h>
53 #include <pcmcia/ds.h>
54 #include <pcmcia/cisreg.h>
59 static int pc_debug = PCMCIA_DEBUG;
60 module_param(pc_debug, int, 0644);
61 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
62 static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
64 #define DEBUG(n, args...)
67 /*====================================================================*/
69 /* Parameters that can be set with 'insmod' */
71 /* Enable the speaker? */
72 static int do_sound = 1;
73 /* Skip strict UART tests? */
74 static int buggy_uart;
76 module_param(do_sound, int, 0444);
77 module_param(buggy_uart, int, 0444);
79 /*====================================================================*/
81 /* Table of multi-port card ID's */
86 int multi; /* 1 = multifunction, > 1 = # ports */
89 static const struct serial_quirk quirks[] = {
91 .manfid = MANFID_OMEGA,
92 .prodid = PRODID_OMEGA_QSP_100,
95 .manfid = MANFID_QUATECH,
96 .prodid = PRODID_QUATECH_DUAL_RS232,
99 .manfid = MANFID_QUATECH,
100 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
103 .manfid = MANFID_QUATECH,
104 .prodid = PRODID_QUATECH_QUAD_RS232,
107 .manfid = MANFID_SOCKET,
108 .prodid = PRODID_SOCKET_DUAL_RS232,
111 .manfid = MANFID_INTEL,
112 .prodid = PRODID_INTEL_DUAL_RS232,
115 .manfid = MANFID_NATINST,
116 .prodid = PRODID_NATINST_QUAD_RS232,
122 struct pcmcia_device *p_dev;
131 const struct serial_quirk *quirk;
134 struct serial_cfg_mem {
141 static int serial_config(struct pcmcia_device * link);
144 static void wakeup_card(struct serial_info *info)
146 int ctrl = info->c950ctrl;
148 if (info->manfid == MANFID_OXSEMI) {
150 } else if (info->manfid == MANFID_POSSIO && info->prodid == PRODID_POSSIO_GCC) {
151 /* request_region? oxsemi branch does no request_region too... */
152 /* This sequence is needed to properly initialize MC45 attached to OXCF950.
153 * I tried decreasing these msleep()s, but it worked properly (survived
154 * 1000 stop/start operations) with these timeouts (or bigger). */
171 /*======================================================================
173 After a card is removed, serial_remove() will unregister
174 the serial device(s), and release the PCMCIA configuration.
176 ======================================================================*/
178 static void serial_remove(struct pcmcia_device *link)
180 struct serial_info *info = link->priv;
183 DEBUG(0, "serial_release(0x%p)\n", link);
186 * Recheck to see if the device is still configured.
188 for (i = 0; i < info->ndev; i++)
189 serial8250_unregister_port(info->line[i]);
191 info->p_dev->dev_node = NULL;
194 pcmcia_disable_device(link);
197 static int serial_suspend(struct pcmcia_device *link)
199 struct serial_info *info = link->priv;
202 for (i = 0; i < info->ndev; i++)
203 serial8250_suspend_port(info->line[i]);
208 static int serial_resume(struct pcmcia_device *link)
210 if (pcmcia_dev_present(link)) {
211 struct serial_info *info = link->priv;
214 for (i = 0; i < info->ndev; i++)
215 serial8250_resume_port(info->line[i]);
222 /*======================================================================
224 serial_attach() creates an "instance" of the driver, allocating
225 local data structures for one device. The device is registered
228 ======================================================================*/
230 static int serial_probe(struct pcmcia_device *link)
232 struct serial_info *info;
234 DEBUG(0, "serial_attach()\n");
236 /* Create new serial device */
237 info = kmalloc(sizeof (*info), GFP_KERNEL);
240 memset(info, 0, sizeof (*info));
244 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
245 link->io.NumPorts1 = 8;
246 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
247 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
248 link->conf.Attributes = CONF_ENABLE_IRQ;
250 link->conf.Attributes |= CONF_ENABLE_SPKR;
251 link->conf.Status = CCSR_AUDIO_ENA;
253 link->conf.IntType = INT_MEMORY_AND_IO;
255 return serial_config(link);
258 /*======================================================================
260 This deletes a driver "instance". The device is de-registered
261 with Card Services. If it has been released, all local data
262 structures are freed. Otherwise, the structures will be freed
263 when the device is released.
265 ======================================================================*/
267 static void serial_detach(struct pcmcia_device *link)
269 struct serial_info *info = link->priv;
271 DEBUG(0, "serial_detach(0x%p)\n", link);
274 * Ensure any outstanding scheduled tasks are completed.
276 flush_scheduled_work();
279 * Ensure that the ports have been released.
287 /*====================================================================*/
289 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
290 kio_addr_t iobase, int irq)
292 struct uart_port port;
295 memset(&port, 0, sizeof (struct uart_port));
296 port.iobase = iobase;
298 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
299 port.uartclk = 1843200;
300 port.dev = &handle_to_dev(handle);
302 port.flags |= UPF_BUGGY_UART;
303 line = serial8250_register_port(&port);
305 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
306 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
310 info->line[info->ndev] = line;
311 sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
312 info->node[info->ndev].major = TTY_MAJOR;
313 info->node[info->ndev].minor = 0x40 + line;
315 info->node[info->ndev - 1].next = &info->node[info->ndev];
321 /*====================================================================*/
324 first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
327 i = pcmcia_get_first_tuple(handle, tuple);
329 return CS_NO_MORE_ITEMS;
330 i = pcmcia_get_tuple_data(handle, tuple);
333 return pcmcia_parse_tuple(handle, tuple, parse);
337 next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
340 i = pcmcia_get_next_tuple(handle, tuple);
342 return CS_NO_MORE_ITEMS;
343 i = pcmcia_get_tuple_data(handle, tuple);
346 return pcmcia_parse_tuple(handle, tuple, parse);
349 /*====================================================================*/
351 static int simple_config(struct pcmcia_device *link)
353 static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
354 static const int size_table[2] = { 8, 16 };
355 struct serial_info *info = link->priv;
356 struct serial_cfg_mem *cfg_mem;
360 cistpl_cftable_entry_t *cf;
361 config_info_t config;
365 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
369 tuple = &cfg_mem->tuple;
370 parse = &cfg_mem->parse;
371 cf = &parse->cftable_entry;
374 /* If the card is already configured, look up the port and irq */
375 i = pcmcia_get_configuration_info(link, &config);
376 if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
378 if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
379 port = config.BasePort2;
381 } else if ((info->manfid == MANFID_OSITECH) &&
382 (config.NumPorts1 == 0x40)) {
383 port = config.BasePort1 + 0x28;
388 return setup_serial(link, info, port, config.AssignedIRQ);
392 /* First pass: look for a config entry that looks normal. */
393 tuple->TupleData = (cisdata_t *) buf;
394 tuple->TupleOffset = 0;
395 tuple->TupleDataMax = 255;
396 tuple->Attributes = 0;
397 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
398 /* Two tries: without IO aliases, then with aliases */
399 for (s = 0; s < 2; s++) {
400 for (try = 0; try < 2; try++) {
401 i = first_tuple(link, tuple, parse);
402 while (i != CS_NO_MORE_ITEMS) {
405 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
407 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
408 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
409 (cf->io.win[0].base != 0)) {
410 link->conf.ConfigIndex = cf->index;
411 link->io.BasePort1 = cf->io.win[0].base;
412 link->io.IOAddrLines = (try == 0) ?
413 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
414 i = pcmcia_request_io(link, &link->io);
419 i = next_tuple(link, tuple, parse);
423 /* Second pass: try to find an entry that isn't picky about
424 its base address, then try to grab any standard serial port
425 address, and finally try to get any free port. */
426 i = first_tuple(link, tuple, parse);
427 while (i != CS_NO_MORE_ITEMS) {
428 if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
429 ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
430 link->conf.ConfigIndex = cf->index;
431 for (j = 0; j < 5; j++) {
432 link->io.BasePort1 = base[j];
433 link->io.IOAddrLines = base[j] ? 16 : 3;
434 i = pcmcia_request_io(link, &link->io);
439 i = next_tuple(link, tuple, parse);
443 if (i != CS_SUCCESS) {
445 "serial_cs: no usable port range found, giving up\n");
446 cs_error(link, RequestIO, i);
451 i = pcmcia_request_irq(link, &link->irq);
452 if (i != CS_SUCCESS) {
453 cs_error(link, RequestIRQ, i);
454 link->irq.AssignedIRQ = 0;
456 if (info->multi && (info->manfid == MANFID_3COM))
457 link->conf.ConfigIndex &= ~(0x08);
458 i = pcmcia_request_configuration(link, &link->conf);
459 if (i != CS_SUCCESS) {
460 cs_error(link, RequestConfiguration, i);
465 return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
468 static int multi_config(struct pcmcia_device * link)
470 struct serial_info *info = link->priv;
471 struct serial_cfg_mem *cfg_mem;
475 cistpl_cftable_entry_t *cf;
476 int i, rc, base2 = 0;
478 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
481 tuple = &cfg_mem->tuple;
482 parse = &cfg_mem->parse;
483 cf = &parse->cftable_entry;
486 tuple->TupleData = (cisdata_t *) buf;
487 tuple->TupleOffset = 0;
488 tuple->TupleDataMax = 255;
489 tuple->Attributes = 0;
490 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
492 /* First, look for a generic full-sized window */
493 link->io.NumPorts1 = info->multi * 8;
494 i = first_tuple(link, tuple, parse);
495 while (i != CS_NO_MORE_ITEMS) {
496 /* The quad port cards have bad CIS's, so just look for a
497 window larger than 8 ports and assume it will be right */
498 if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
499 (cf->io.win[0].len > 8)) {
500 link->conf.ConfigIndex = cf->index;
501 link->io.BasePort1 = cf->io.win[0].base;
502 link->io.IOAddrLines =
503 cf->io.flags & CISTPL_IO_LINES_MASK;
504 i = pcmcia_request_io(link, &link->io);
505 base2 = link->io.BasePort1 + 8;
509 i = next_tuple(link, tuple, parse);
512 /* If that didn't work, look for two windows */
513 if (i != CS_SUCCESS) {
514 link->io.NumPorts1 = link->io.NumPorts2 = 8;
516 i = first_tuple(link, tuple, parse);
517 while (i != CS_NO_MORE_ITEMS) {
518 if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
519 link->conf.ConfigIndex = cf->index;
520 link->io.BasePort1 = cf->io.win[0].base;
521 link->io.BasePort2 = cf->io.win[1].base;
522 link->io.IOAddrLines =
523 cf->io.flags & CISTPL_IO_LINES_MASK;
524 i = pcmcia_request_io(link, &link->io);
525 base2 = link->io.BasePort2;
529 i = next_tuple(link, tuple, parse);
533 if (i != CS_SUCCESS) {
534 cs_error(link, RequestIO, i);
539 i = pcmcia_request_irq(link, &link->irq);
540 if (i != CS_SUCCESS) {
542 "serial_cs: no usable port range found, giving up\n");
543 cs_error(link, RequestIRQ, i);
544 link->irq.AssignedIRQ = 0;
546 /* Socket Dual IO: this enables irq's for second port */
547 if (info->multi && (info->manfid == MANFID_SOCKET)) {
548 link->conf.Present |= PRESENT_EXT_STATUS;
549 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
551 i = pcmcia_request_configuration(link, &link->conf);
552 if (i != CS_SUCCESS) {
553 cs_error(link, RequestConfiguration, i);
558 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
559 * 8 registers are for the UART, the others are extra registers.
560 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
562 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
563 info->prodid == PRODID_POSSIO_GCC)) {
566 if (cf->index == 1 || cf->index == 3) {
567 err = setup_serial(link, info, base2,
568 link->irq.AssignedIRQ);
569 base2 = link->io.BasePort1;
571 err = setup_serial(link, info, link->io.BasePort1,
572 link->irq.AssignedIRQ);
574 info->c950ctrl = base2;
580 setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
581 /* The Nokia cards are not really multiport cards */
582 if (info->manfid == MANFID_NOKIA) {
586 for (i = 0; i < info->multi - 1; i++)
587 setup_serial(link, info, base2 + (8 * i),
588 link->irq.AssignedIRQ);
595 /*======================================================================
597 serial_config() is scheduled to run after a CARD_INSERTION event
598 is received, to configure the PCMCIA socket, and to make the
599 serial device available to the system.
601 ======================================================================*/
603 static int serial_config(struct pcmcia_device * link)
605 struct serial_info *info = link->priv;
606 struct serial_cfg_mem *cfg_mem;
610 cistpl_cftable_entry_t *cf;
611 int i, last_ret, last_fn;
613 DEBUG(0, "serial_config(0x%p)\n", link);
615 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
619 tuple = &cfg_mem->tuple;
620 parse = &cfg_mem->parse;
621 cf = &parse->cftable_entry;
624 tuple->TupleData = (cisdata_t *) buf;
625 tuple->TupleOffset = 0;
626 tuple->TupleDataMax = 255;
627 tuple->Attributes = 0;
628 /* Get configuration register information */
629 tuple->DesiredTuple = CISTPL_CONFIG;
630 last_ret = first_tuple(link, tuple, parse);
631 if (last_ret != CS_SUCCESS) {
632 last_fn = ParseTuple;
635 link->conf.ConfigBase = parse->config.base;
636 link->conf.Present = parse->config.rmask[0];
638 /* Is this a compliant multifunction card? */
639 tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
640 tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
641 info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
643 /* Is this a multiport card? */
644 tuple->DesiredTuple = CISTPL_MANFID;
645 if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
646 info->manfid = parse->manfid.manf;
647 info->prodid = parse->manfid.card;
648 for (i = 0; i < ARRAY_SIZE(quirks); i++)
649 if ((info->manfid == quirks[i].manfid) &&
650 (info->prodid == quirks[i].prodid)) {
651 info->quirk = &quirks[i];
656 /* Another check for dual-serial cards: look for either serial or
657 multifunction cards that ask for appropriate IO port ranges */
658 tuple->DesiredTuple = CISTPL_FUNCID;
659 if ((info->multi == 0) &&
660 ((first_tuple(link, tuple, parse) != CS_SUCCESS) ||
661 (parse->funcid.func == CISTPL_FUNCID_MULTI) ||
662 (parse->funcid.func == CISTPL_FUNCID_SERIAL))) {
663 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
664 if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
665 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
666 info->multi = cf->io.win[0].len >> 3;
667 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
668 (cf->io.win[1].len == 8))
674 * Apply any multi-port quirk.
676 if (info->quirk && info->quirk->multi != -1)
677 info->multi = info->quirk->multi;
687 if (info->manfid == MANFID_IBM) {
688 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
689 last_ret = pcmcia_access_configuration_register(link, ®);
691 last_fn = AccessConfigurationRegister;
694 reg.Action = CS_WRITE;
695 reg.Value = reg.Value | 1;
696 last_ret = pcmcia_access_configuration_register(link, ®);
698 last_fn = AccessConfigurationRegister;
703 link->dev_node = &info->node[0];
708 cs_error(link, last_fn, last_ret);
715 static struct pcmcia_device_id serial_ids[] = {
716 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
717 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
718 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
719 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
720 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
721 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
725 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
726 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
727 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
728 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
729 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
730 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
731 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
732 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
733 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
734 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
735 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
736 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
737 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
738 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
739 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
740 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
741 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
742 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
743 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
744 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
745 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
746 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
747 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
748 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
749 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
750 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
751 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
752 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
753 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
754 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
755 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
756 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
757 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
758 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
759 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
760 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
761 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
762 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
763 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
764 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
765 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
766 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
767 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
768 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
769 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
770 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
771 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
772 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
773 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
774 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
775 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
776 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
777 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
778 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
779 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
780 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
781 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
782 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
783 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
784 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
785 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
786 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
787 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
788 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
789 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
790 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
791 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
792 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
793 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
794 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
795 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
796 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
797 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
798 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
799 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
800 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
801 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
802 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
803 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
804 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
805 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
806 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"),
807 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
808 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
809 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
810 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
811 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
812 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
813 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
814 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
815 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
816 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"),
817 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
819 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
820 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
821 PCMCIA_DEVICE_FUNC_ID(2),
824 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
826 static struct pcmcia_driver serial_cs_driver = {
827 .owner = THIS_MODULE,
831 .probe = serial_probe,
832 .remove = serial_detach,
833 .id_table = serial_ids,
834 .suspend = serial_suspend,
835 .resume = serial_resume,
838 static int __init init_serial_cs(void)
840 return pcmcia_register_driver(&serial_cs_driver);
843 static void __exit exit_serial_cs(void)
845 pcmcia_unregister_driver(&serial_cs_driver);
848 module_init(init_serial_cs);
849 module_exit(exit_serial_cs);
851 MODULE_LICENSE("GPL");