1 /*======================================================================
3 A driver for PCMCIA serial devices
5 serial_cs.c 1.134 2002/05/04 05:48:53
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/sched.h>
39 #include <linux/ptrace.h>
40 #include <linux/slab.h>
41 #include <linux/string.h>
42 #include <linux/timer.h>
43 #include <linux/serial_core.h>
44 #include <linux/major.h>
46 #include <asm/system.h>
48 #include <pcmcia/cs_types.h>
49 #include <pcmcia/cs.h>
50 #include <pcmcia/cistpl.h>
51 #include <pcmcia/ciscode.h>
52 #include <pcmcia/ds.h>
53 #include <pcmcia/cisreg.h>
58 static int pc_debug = PCMCIA_DEBUG;
59 module_param(pc_debug, int, 0644);
60 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
61 static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
63 #define DEBUG(n, args...)
66 /*====================================================================*/
68 /* Parameters that can be set with 'insmod' */
70 /* Enable the speaker? */
71 static int do_sound = 1;
72 /* Skip strict UART tests? */
73 static int buggy_uart;
75 module_param(do_sound, int, 0444);
76 module_param(buggy_uart, int, 0444);
78 /*====================================================================*/
80 /* Table of multi-port card ID's */
85 int multi; /* 1 = multifunction, > 1 = # ports */
88 static const struct multi_id multi_id[] = {
89 { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
90 { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
91 { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
92 { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 },
93 { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 },
94 { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 },
95 { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 }
97 #define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id))
100 struct pcmcia_device *p_dev;
109 struct serial_cfg_mem {
116 static int serial_config(struct pcmcia_device * link);
119 /*======================================================================
121 After a card is removed, serial_remove() will unregister
122 the serial device(s), and release the PCMCIA configuration.
124 ======================================================================*/
126 static void serial_remove(struct pcmcia_device *link)
128 struct serial_info *info = link->priv;
131 DEBUG(0, "serial_release(0x%p)\n", link);
134 * Recheck to see if the device is still configured.
136 for (i = 0; i < info->ndev; i++)
137 serial8250_unregister_port(info->line[i]);
139 info->p_dev->dev_node = NULL;
142 pcmcia_disable_device(link);
145 static int serial_suspend(struct pcmcia_device *link)
147 struct serial_info *info = link->priv;
150 for (i = 0; i < info->ndev; i++)
151 serial8250_suspend_port(info->line[i]);
156 static int serial_resume(struct pcmcia_device *link)
158 if (pcmcia_dev_present(link)) {
159 struct serial_info *info = link->priv;
162 for (i = 0; i < info->ndev; i++)
163 serial8250_resume_port(info->line[i]);
169 /*======================================================================
171 serial_attach() creates an "instance" of the driver, allocating
172 local data structures for one device. The device is registered
175 ======================================================================*/
177 static int serial_probe(struct pcmcia_device *link)
179 struct serial_info *info;
181 DEBUG(0, "serial_attach()\n");
183 /* Create new serial device */
184 info = kmalloc(sizeof (*info), GFP_KERNEL);
187 memset(info, 0, sizeof (*info));
191 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
192 link->io.NumPorts1 = 8;
193 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
194 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
195 link->conf.Attributes = CONF_ENABLE_IRQ;
197 link->conf.Attributes |= CONF_ENABLE_SPKR;
198 link->conf.Status = CCSR_AUDIO_ENA;
200 link->conf.IntType = INT_MEMORY_AND_IO;
202 return serial_config(link);
205 /*======================================================================
207 This deletes a driver "instance". The device is de-registered
208 with Card Services. If it has been released, all local data
209 structures are freed. Otherwise, the structures will be freed
210 when the device is released.
212 ======================================================================*/
214 static void serial_detach(struct pcmcia_device *link)
216 struct serial_info *info = link->priv;
218 DEBUG(0, "serial_detach(0x%p)\n", link);
221 * Ensure any outstanding scheduled tasks are completed.
223 flush_scheduled_work();
226 * Ensure that the ports have been released.
234 /*====================================================================*/
236 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
237 kio_addr_t iobase, int irq)
239 struct uart_port port;
242 memset(&port, 0, sizeof (struct uart_port));
243 port.iobase = iobase;
245 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
246 port.uartclk = 1843200;
247 port.dev = &handle_to_dev(handle);
249 port.flags |= UPF_BUGGY_UART;
250 line = serial8250_register_port(&port);
252 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
253 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
257 info->line[info->ndev] = line;
258 sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
259 info->node[info->ndev].major = TTY_MAJOR;
260 info->node[info->ndev].minor = 0x40 + line;
262 info->node[info->ndev - 1].next = &info->node[info->ndev];
268 /*====================================================================*/
271 first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
274 i = pcmcia_get_first_tuple(handle, tuple);
276 return CS_NO_MORE_ITEMS;
277 i = pcmcia_get_tuple_data(handle, tuple);
280 return pcmcia_parse_tuple(handle, tuple, parse);
284 next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
287 i = pcmcia_get_next_tuple(handle, tuple);
289 return CS_NO_MORE_ITEMS;
290 i = pcmcia_get_tuple_data(handle, tuple);
293 return pcmcia_parse_tuple(handle, tuple, parse);
296 /*====================================================================*/
298 static int simple_config(struct pcmcia_device *link)
300 static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
301 static const int size_table[2] = { 8, 16 };
302 struct serial_info *info = link->priv;
303 struct serial_cfg_mem *cfg_mem;
307 cistpl_cftable_entry_t *cf;
308 config_info_t config;
312 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
316 tuple = &cfg_mem->tuple;
317 parse = &cfg_mem->parse;
318 cf = &parse->cftable_entry;
321 /* If the card is already configured, look up the port and irq */
322 i = pcmcia_get_configuration_info(link, &config);
323 if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
325 if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
326 port = config.BasePort2;
328 } else if ((info->manfid == MANFID_OSITECH) &&
329 (config.NumPorts1 == 0x40)) {
330 port = config.BasePort1 + 0x28;
335 return setup_serial(link, info, port, config.AssignedIRQ);
339 /* First pass: look for a config entry that looks normal. */
340 tuple->TupleData = (cisdata_t *) buf;
341 tuple->TupleOffset = 0;
342 tuple->TupleDataMax = 255;
343 tuple->Attributes = 0;
344 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
345 /* Two tries: without IO aliases, then with aliases */
346 for (s = 0; s < 2; s++) {
347 for (try = 0; try < 2; try++) {
348 i = first_tuple(link, tuple, parse);
349 while (i != CS_NO_MORE_ITEMS) {
352 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
354 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
355 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
356 (cf->io.win[0].base != 0)) {
357 link->conf.ConfigIndex = cf->index;
358 link->io.BasePort1 = cf->io.win[0].base;
359 link->io.IOAddrLines = (try == 0) ?
360 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
361 i = pcmcia_request_io(link, &link->io);
366 i = next_tuple(link, tuple, parse);
370 /* Second pass: try to find an entry that isn't picky about
371 its base address, then try to grab any standard serial port
372 address, and finally try to get any free port. */
373 i = first_tuple(link, tuple, parse);
374 while (i != CS_NO_MORE_ITEMS) {
375 if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
376 ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
377 link->conf.ConfigIndex = cf->index;
378 for (j = 0; j < 5; j++) {
379 link->io.BasePort1 = base[j];
380 link->io.IOAddrLines = base[j] ? 16 : 3;
381 i = pcmcia_request_io(link, &link->io);
386 i = next_tuple(link, tuple, parse);
390 if (i != CS_SUCCESS) {
392 "serial_cs: no usable port range found, giving up\n");
393 cs_error(link, RequestIO, i);
398 i = pcmcia_request_irq(link, &link->irq);
399 if (i != CS_SUCCESS) {
400 cs_error(link, RequestIRQ, i);
401 link->irq.AssignedIRQ = 0;
403 if (info->multi && (info->manfid == MANFID_3COM))
404 link->conf.ConfigIndex &= ~(0x08);
405 i = pcmcia_request_configuration(link, &link->conf);
406 if (i != CS_SUCCESS) {
407 cs_error(link, RequestConfiguration, i);
412 return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
415 static int multi_config(struct pcmcia_device * link)
417 struct serial_info *info = link->priv;
418 struct serial_cfg_mem *cfg_mem;
422 cistpl_cftable_entry_t *cf;
423 int i, rc, base2 = 0;
425 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
428 tuple = &cfg_mem->tuple;
429 parse = &cfg_mem->parse;
430 cf = &parse->cftable_entry;
433 tuple->TupleData = (cisdata_t *) buf;
434 tuple->TupleOffset = 0;
435 tuple->TupleDataMax = 255;
436 tuple->Attributes = 0;
437 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
439 /* First, look for a generic full-sized window */
440 link->io.NumPorts1 = info->multi * 8;
441 i = first_tuple(link, tuple, parse);
442 while (i != CS_NO_MORE_ITEMS) {
443 /* The quad port cards have bad CIS's, so just look for a
444 window larger than 8 ports and assume it will be right */
445 if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
446 (cf->io.win[0].len > 8)) {
447 link->conf.ConfigIndex = cf->index;
448 link->io.BasePort1 = cf->io.win[0].base;
449 link->io.IOAddrLines =
450 cf->io.flags & CISTPL_IO_LINES_MASK;
451 i = pcmcia_request_io(link, &link->io);
452 base2 = link->io.BasePort1 + 8;
456 i = next_tuple(link, tuple, parse);
459 /* If that didn't work, look for two windows */
460 if (i != CS_SUCCESS) {
461 link->io.NumPorts1 = link->io.NumPorts2 = 8;
463 i = first_tuple(link, tuple, parse);
464 while (i != CS_NO_MORE_ITEMS) {
465 if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
466 link->conf.ConfigIndex = cf->index;
467 link->io.BasePort1 = cf->io.win[0].base;
468 link->io.BasePort2 = cf->io.win[1].base;
469 link->io.IOAddrLines =
470 cf->io.flags & CISTPL_IO_LINES_MASK;
471 i = pcmcia_request_io(link, &link->io);
472 base2 = link->io.BasePort2;
476 i = next_tuple(link, tuple, parse);
480 if (i != CS_SUCCESS) {
481 cs_error(link, RequestIO, i);
486 i = pcmcia_request_irq(link, &link->irq);
487 if (i != CS_SUCCESS) {
489 "serial_cs: no usable port range found, giving up\n");
490 cs_error(link, RequestIRQ, i);
491 link->irq.AssignedIRQ = 0;
493 /* Socket Dual IO: this enables irq's for second port */
494 if (info->multi && (info->manfid == MANFID_SOCKET)) {
495 link->conf.Present |= PRESENT_EXT_STATUS;
496 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
498 i = pcmcia_request_configuration(link, &link->conf);
499 if (i != CS_SUCCESS) {
500 cs_error(link, RequestConfiguration, i);
505 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
506 8 registers are for the UART, the others are extra registers */
507 if (info->manfid == MANFID_OXSEMI) {
508 if (cf->index == 1 || cf->index == 3) {
509 setup_serial(link, info, base2, link->irq.AssignedIRQ);
510 outb(12, link->io.BasePort1 + 1);
512 setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
519 setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
520 /* The Nokia cards are not really multiport cards */
521 if (info->manfid == MANFID_NOKIA) {
525 for (i = 0; i < info->multi - 1; i++)
526 setup_serial(link, info, base2 + (8 * i),
527 link->irq.AssignedIRQ);
534 /*======================================================================
536 serial_config() is scheduled to run after a CARD_INSERTION event
537 is received, to configure the PCMCIA socket, and to make the
538 serial device available to the system.
540 ======================================================================*/
542 static int serial_config(struct pcmcia_device * link)
544 struct serial_info *info = link->priv;
545 struct serial_cfg_mem *cfg_mem;
549 cistpl_cftable_entry_t *cf;
550 int i, last_ret, last_fn;
552 DEBUG(0, "serial_config(0x%p)\n", link);
554 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
558 tuple = &cfg_mem->tuple;
559 parse = &cfg_mem->parse;
560 cf = &parse->cftable_entry;
563 tuple->TupleData = (cisdata_t *) buf;
564 tuple->TupleOffset = 0;
565 tuple->TupleDataMax = 255;
566 tuple->Attributes = 0;
567 /* Get configuration register information */
568 tuple->DesiredTuple = CISTPL_CONFIG;
569 last_ret = first_tuple(link, tuple, parse);
570 if (last_ret != CS_SUCCESS) {
571 last_fn = ParseTuple;
574 link->conf.ConfigBase = parse->config.base;
575 link->conf.Present = parse->config.rmask[0];
577 /* Is this a compliant multifunction card? */
578 tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
579 tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
580 info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
582 /* Is this a multiport card? */
583 tuple->DesiredTuple = CISTPL_MANFID;
584 if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
585 info->manfid = parse->manfid.manf;
586 for (i = 0; i < MULTI_COUNT; i++)
587 if ((info->manfid == multi_id[i].manfid) &&
588 (parse->manfid.card == multi_id[i].prodid))
591 info->multi = multi_id[i].multi;
594 /* Another check for dual-serial cards: look for either serial or
595 multifunction cards that ask for appropriate IO port ranges */
596 tuple->DesiredTuple = CISTPL_FUNCID;
597 if ((info->multi == 0) &&
598 ((first_tuple(link, tuple, parse) != CS_SUCCESS) ||
599 (parse->funcid.func == CISTPL_FUNCID_MULTI) ||
600 (parse->funcid.func == CISTPL_FUNCID_SERIAL))) {
601 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
602 if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
603 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
604 info->multi = cf->io.win[0].len >> 3;
605 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
606 (cf->io.win[1].len == 8))
619 if (info->manfid == MANFID_IBM) {
620 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
621 last_ret = pcmcia_access_configuration_register(link, ®);
623 last_fn = AccessConfigurationRegister;
626 reg.Action = CS_WRITE;
627 reg.Value = reg.Value | 1;
628 last_ret = pcmcia_access_configuration_register(link, ®);
630 last_fn = AccessConfigurationRegister;
635 link->dev_node = &info->node[0];
640 cs_error(link, last_fn, last_ret);
647 static struct pcmcia_device_id serial_ids[] = {
648 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
649 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
650 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
651 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
652 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
653 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
654 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
655 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
656 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
657 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
658 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
659 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
660 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
661 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
662 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
663 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
664 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
665 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
666 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
667 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
668 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
669 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
670 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
671 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
672 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
673 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
674 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
675 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
676 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
677 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
678 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
679 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
680 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
681 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
682 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
683 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
684 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
685 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
686 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
687 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
688 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
689 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
690 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
691 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
692 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
693 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
694 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
695 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
696 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
697 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
698 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
699 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
700 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
701 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
702 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
703 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
704 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
705 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
706 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
707 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
708 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
709 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
710 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
711 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
712 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
713 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
714 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
715 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
716 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
717 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
718 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
719 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
720 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
721 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
722 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
723 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
724 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
725 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
726 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
727 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
728 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
729 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
730 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
731 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
732 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
733 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
734 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
735 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
736 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
737 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
738 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"),
739 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
740 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
741 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
742 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
743 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
744 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
745 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
746 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
747 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
748 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"),
750 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
751 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
752 PCMCIA_DEVICE_FUNC_ID(2),
755 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
757 static struct pcmcia_driver serial_cs_driver = {
758 .owner = THIS_MODULE,
762 .probe = serial_probe,
763 .remove = serial_detach,
764 .id_table = serial_ids,
765 .suspend = serial_suspend,
766 .resume = serial_resume,
769 static int __init init_serial_cs(void)
771 return pcmcia_register_driver(&serial_cs_driver);
774 static void __exit exit_serial_cs(void)
776 pcmcia_unregister_driver(&serial_cs_driver);
779 module_init(init_serial_cs);
780 module_exit(exit_serial_cs);
782 MODULE_LICENSE("GPL");