2 * comedi/drivers/ii_pci20kc.c
3 * Driver for Intelligent Instruments PCI-20001C carrier board
6 * Copyright (C) 2000 Markus Kempf <kempf@matsci.uni-sb.de>
7 * with suggestions from David Schleef
10 * Linux device driver for COMEDI
11 * Intelligent Instrumentation
12 * PCI-20001 C-2A Carrier Board
13 * PCI-20341 M-1A 16-Bit analog input module
17 * PCI-20006 M-2 16-Bit analog output module
18 * - ranges (-10V - +10V) (0V - +10V) (-5V - +5V)
21 * only ONE PCI-20341 module possible
22 * only ONE PCI-20006 module possible
23 * no extern trigger implemented
25 * NOT WORKING (but soon) only 4 on-board differential channels supported
26 * NOT WORKING (but soon) only ONE di-port and ONE do-port supported
27 * instead of 4 digital ports
31 * The state of this driver is only a starting point for a complete
32 * COMEDI-driver. The final driver should support all features of the
33 * carrier board and modules.
35 * The test configuration:
37 * kernel 2.2.14 with RTAI v1.2 and patch-2.2.14rthal2
44 Description: Intelligent Instruments PCI-20001C carrier board
45 Author: Markus Kempf <kempf@matsci.uni-sb.de>
46 Devices: [Intelligent Instrumentation] PCI-20001C (ii_pci20kc)
49 Supports the PCI-20001 C-2a Carrier board, and could probably support
50 the other carrier boards with small modifications. Modules supported
52 PCI-20006 M-2 16-bit analog output module
53 PCI-20341 M-1A 16-bit analog input module
58 2 first option for module 1
59 3 second option for module 1
60 4 first option for module 2
61 5 second option for module 2
62 6 first option for module 3
63 7 second option for module 3
65 options for PCI-20006M:
66 first: Analog output channel 0 range configuration
67 0 bipolar 10 (-10V -- +10V)
68 1 unipolar 10 (0V -- +10V)
69 2 bipolar 5 (-5V -- 5V)
70 second: Analog output channel 1 range configuration
72 options for PCI-20341M:
73 first: Analog input gain configuration
80 /* XXX needs to use ioremap() for compatibility with 2.4 kernels. Should also
81 * check_mem_region() etc. - fmhess */
83 #include "../comedidev.h"
85 #define PCI20000_ID 0x1d
86 #define PCI20341_ID 0x77
87 #define PCI20006_ID 0xe3
88 #define PCI20xxx_EMPTY_ID 0xff
90 #define PCI20000_OFFSET 0x100
91 #define PCI20000_MODULES 3
93 #define PCI20000_DIO_0 0x80
94 #define PCI20000_DIO_1 0x81
95 #define PCI20000_DIO_2 0xc0
96 #define PCI20000_DIO_3 0xc1
97 #define PCI20000_DIO_CONTROL_01 0x83 /* port 0, 1 control */
98 #define PCI20000_DIO_CONTROL_23 0xc3 /* port 2, 3 control */
99 #define PCI20000_DIO_BUFFER 0x82 /* buffer direction & enable */
100 #define PCI20000_DIO_EOC 0xef /* even port, control output */
101 #define PCI20000_DIO_OOC 0xfd /* odd port, control output */
102 #define PCI20000_DIO_EIC 0x90 /* even port, control input */
103 #define PCI20000_DIO_OIC 0x82 /* odd port, control input */
104 #define DIO_CAND 0x12 /* and bit 1 & 4 of control */
105 #define DIO_BE 0x01 /* buffer: port enable */
106 #define DIO_BO 0x04 /* buffer: output */
107 #define DIO_BI 0x05 /* buffer: input */
108 #define DIO_PS_0 0x00 /* buffer: port shift 0 */
109 #define DIO_PS_1 0x01 /* buffer: port shift 1 */
110 #define DIO_PS_2 0x04 /* buffer: port shift 2 */
111 #define DIO_PS_3 0x05 /* buffer: port shift 3 */
113 #define PCI20006_LCHAN0 0x0d
114 #define PCI20006_STROBE0 0x0b
115 #define PCI20006_LCHAN1 0x15
116 #define PCI20006_STROBE1 0x13
118 #define PCI20341_INIT 0x04
119 #define PCI20341_REPMODE 0x00 /* single shot mode */
120 #define PCI20341_PACER 0x00 /* Hardware Pacer disabled */
121 #define PCI20341_CHAN_NR 0x04 /* number of input channels */
122 #define PCI20341_CONFIG_REG 0x10
123 #define PCI20341_MOD_STATUS 0x01
124 #define PCI20341_OPT_REG 0x11
125 #define PCI20341_SET_TIME_REG 0x15
126 #define PCI20341_LCHAN_ADDR_REG 0x13
127 #define PCI20341_CHAN_LIST 0x80
128 #define PCI20341_CC_RESET 0x1b
129 #define PCI20341_CHAN_RESET 0x19
130 #define PCI20341_SOFT_PACER 0x04
131 #define PCI20341_STATUS_REG 0x12
132 #define PCI20341_LDATA 0x02
133 #define PCI20341_DAISY_CHAIN 0x20 /* On-board inputs only */
134 #define PCI20341_MUX 0x04 /* Enable on-board MUX */
135 #define PCI20341_SCANLIST 0x80 /* Channel/Gain Scan List */
137 union pci20xxx_subdev_private {
138 void __iomem *iobase;
140 void __iomem *iobase;
141 const struct comedi_lrange *ao_range_list[2];
142 /* range of channels of ao module */
143 unsigned int last_data[2];
146 void __iomem *iobase;
153 struct pci20xxx_private {
155 void __iomem *ioaddr;
156 union pci20xxx_subdev_private subdev_private[PCI20000_MODULES];
159 #define CHAN (CR_CHAN(it->chanlist[0]))
161 static int pci20006_init(struct comedi_device *dev, struct comedi_subdevice *s,
163 static int pci20341_init(struct comedi_device *dev, struct comedi_subdevice *s,
165 static int pci20xxx_dio_init(struct comedi_device *dev,
166 struct comedi_subdevice *s);
169 options[0] Board base address
171 options[2] first option for module 1
172 options[3] second option for module 1
173 options[4] first option for module 2
174 options[5] second option for module 2
175 options[6] first option for module 3
176 options[7] second option for module 3
178 options for PCI-20341M:
179 first Analog input gain configuration
185 options for PCI-20006M:
186 first Analog output channel 0 range configuration
187 0 == bipolar 10 (-10V -- +10V)
188 1 == unipolar 10V (0V -- +10V)
189 2 == bipolar 5V (-5V -- +5V)
190 second Analog output channel 1 range configuration
191 0 == bipolar 10 (-10V -- +10V)
192 1 == unipolar 10V (0V -- +10V)
193 2 == bipolar 5V (-5V -- +5V)
195 static int pci20xxx_attach(struct comedi_device *dev,
196 struct comedi_devconfig *it)
198 struct pci20xxx_private *devpriv;
202 struct comedi_subdevice *s;
203 union pci20xxx_subdev_private *sdp;
205 ret = comedi_alloc_subdevices(dev, 1 + PCI20000_MODULES);
209 devpriv = kzalloc(sizeof(*devpriv), GFP_KERNEL);
212 dev->private = devpriv;
214 devpriv->ioaddr = (void __iomem *)(unsigned long)it->options[0];
215 dev->board_name = "pci20kc";
217 /* Check PCI-20001 C-2A Carrier Board ID */
218 if ((readb(devpriv->ioaddr) & PCI20000_ID) != PCI20000_ID) {
219 dev_warn(dev->class_dev,
220 "PCI-20001 C-2A Carrier Board at base=0x%p not found !\n",
224 dev_info(dev->class_dev, "PCI-20001 C-2A at base=0x%p\n",
227 for (i = 0; i < PCI20000_MODULES; i++) {
228 s = &dev->subdevices[i];
229 id = readb(devpriv->ioaddr + (i + 1) * PCI20000_OFFSET);
230 s->private = devpriv->subdev_private + i;
234 sdp->pci20006.iobase =
235 devpriv->ioaddr + (i + 1) * PCI20000_OFFSET;
236 pci20006_init(dev, s, it->options[2 * i + 2],
237 it->options[2 * i + 3]);
238 dev_info(dev->class_dev,
239 "PCI-20006 module in slot %d\n", i + 1);
242 sdp->pci20341.iobase =
243 devpriv->ioaddr + (i + 1) * PCI20000_OFFSET;
244 pci20341_init(dev, s, it->options[2 * i + 2],
245 it->options[2 * i + 3]);
246 dev_info(dev->class_dev,
247 "PCI-20341 module in slot %d\n", i + 1);
250 dev_warn(dev->class_dev,
251 "unknown module code 0x%02x in slot %d: module disabled\n",
252 id, i); /* XXX this looks like a bug! i + 1 ?? */
254 case PCI20xxx_EMPTY_ID:
255 s->type = COMEDI_SUBD_UNUSED;
260 /* initialize struct pci20xxx_private */
261 pci20xxx_dio_init(dev, &dev->subdevices[PCI20000_MODULES]);
266 static void pci20xxx_detach(struct comedi_device *dev)
268 /* Nothing to cleanup */
273 static int pci20006_insn_read(struct comedi_device *dev,
274 struct comedi_subdevice *s,
275 struct comedi_insn *insn, unsigned int *data);
276 static int pci20006_insn_write(struct comedi_device *dev,
277 struct comedi_subdevice *s,
278 struct comedi_insn *insn, unsigned int *data);
280 static const struct comedi_lrange *pci20006_range_list[] = {
286 static int pci20006_init(struct comedi_device *dev, struct comedi_subdevice *s,
289 union pci20xxx_subdev_private *sdp = s->private;
291 if (opt0 < 0 || opt0 > 2)
293 if (opt1 < 0 || opt1 > 2)
296 sdp->pci20006.ao_range_list[0] = pci20006_range_list[opt0];
297 sdp->pci20006.ao_range_list[1] = pci20006_range_list[opt1];
300 s->type = COMEDI_SUBD_AO;
301 s->subdev_flags = SDF_WRITABLE;
304 s->insn_read = pci20006_insn_read;
305 s->insn_write = pci20006_insn_write;
307 s->range_table_list = sdp->pci20006.ao_range_list;
311 static int pci20006_insn_read(struct comedi_device *dev,
312 struct comedi_subdevice *s,
313 struct comedi_insn *insn, unsigned int *data)
315 union pci20xxx_subdev_private *sdp = s->private;
317 data[0] = sdp->pci20006.last_data[CR_CHAN(insn->chanspec)];
322 static int pci20006_insn_write(struct comedi_device *dev,
323 struct comedi_subdevice *s,
324 struct comedi_insn *insn, unsigned int *data)
326 union pci20xxx_subdev_private *sdp = s->private;
328 unsigned int boarddata;
330 sdp->pci20006.last_data[CR_CHAN(insn->chanspec)] = data[0];
331 boarddata = (((unsigned int)data[0] + 0x8000) & 0xffff);
332 /* comedi-data -> board-data */
333 lo = (boarddata & 0xff);
334 hi = ((boarddata >> 8) & 0xff);
336 switch (CR_CHAN(insn->chanspec)) {
338 writeb(lo, sdp->iobase + PCI20006_LCHAN0);
339 writeb(hi, sdp->iobase + PCI20006_LCHAN0 + 1);
340 writeb(0x00, sdp->iobase + PCI20006_STROBE0);
343 writeb(lo, sdp->iobase + PCI20006_LCHAN1);
344 writeb(hi, sdp->iobase + PCI20006_LCHAN1 + 1);
345 writeb(0x00, sdp->iobase + PCI20006_STROBE1);
348 dev_warn(dev->class_dev, "ao channel Error!\n");
357 static int pci20341_insn_read(struct comedi_device *dev,
358 struct comedi_subdevice *s,
359 struct comedi_insn *insn, unsigned int *data);
361 static const int pci20341_timebase[] = { 0x00, 0x00, 0x00, 0x04 };
362 static const int pci20341_settling_time[] = { 0x58, 0x58, 0x93, 0x99 };
364 static const struct comedi_lrange range_bipolar0_5 = {
369 static const struct comedi_lrange range_bipolar0_05 = {
374 static const struct comedi_lrange range_bipolar0_025 = {
379 static const struct comedi_lrange *const pci20341_ranges[] = {
386 static int pci20341_init(struct comedi_device *dev, struct comedi_subdevice *s,
389 union pci20xxx_subdev_private *sdp = s->private;
392 /* options handling */
393 if (opt0 < 0 || opt0 > 3)
395 sdp->pci20341.timebase = pci20341_timebase[opt0];
396 sdp->pci20341.settling_time = pci20341_settling_time[opt0];
399 s->type = COMEDI_SUBD_AI;
400 s->subdev_flags = SDF_READABLE;
401 s->n_chan = PCI20341_CHAN_NR;
402 s->len_chanlist = PCI20341_SCANLIST;
403 s->insn_read = pci20341_insn_read;
405 s->range_table = pci20341_ranges[opt0];
407 /* depends on gain, trigger, repetition mode */
408 option = sdp->pci20341.timebase | PCI20341_REPMODE;
410 /* initialize Module */
411 writeb(PCI20341_INIT, sdp->iobase + PCI20341_CONFIG_REG);
413 writeb(PCI20341_PACER, sdp->iobase + PCI20341_MOD_STATUS);
414 /* option register */
415 writeb(option, sdp->iobase + PCI20341_OPT_REG);
416 /* settling time counter */
417 writeb(sdp->pci20341.settling_time,
418 sdp->iobase + PCI20341_SET_TIME_REG);
419 /* trigger not implemented */
423 static int pci20341_insn_read(struct comedi_device *dev,
424 struct comedi_subdevice *s,
425 struct comedi_insn *insn, unsigned int *data)
427 union pci20xxx_subdev_private *sdp = s->private;
428 unsigned int i = 0, j = 0;
430 unsigned char eoc; /* end of conversion */
431 unsigned int clb; /* channel list byte */
432 unsigned int boarddata;
434 /* write number of input channels */
435 writeb(1, sdp->iobase + PCI20341_LCHAN_ADDR_REG);
436 clb = PCI20341_DAISY_CHAIN | PCI20341_MUX | (sdp->pci20341.ai_gain << 3)
437 | CR_CHAN(insn->chanspec);
438 writeb(clb, sdp->iobase + PCI20341_CHAN_LIST);
440 /* reset settling time counter and trigger delay counter */
441 writeb(0x00, sdp->iobase + PCI20341_CC_RESET);
443 writeb(0x00, sdp->iobase + PCI20341_CHAN_RESET);
447 for (i = 0; i < insn->n; i++) {
448 /* data polling isn't the niciest way to get the data, I know,
449 * but there are only 6 cycles (mean) and it is easier than
450 * the whole interrupt stuff
454 readb(sdp->iobase + PCI20341_SOFT_PACER);
456 eoc = readb(sdp->iobase + PCI20341_STATUS_REG);
457 /* poll Interrupt Flag */
458 while ((eoc < 0x80) && j < 100) {
460 eoc = readb(sdp->iobase + PCI20341_STATUS_REG);
463 dev_warn(dev->class_dev,
464 "AI interrupt channel %i polling exit !\n", i);
467 lo = readb(sdp->iobase + PCI20341_LDATA);
468 hi = readb(sdp->iobase + PCI20341_LDATA + 1);
469 boarddata = lo + 0x100 * hi;
471 /* board-data -> comedi-data */
472 data[i] = (short)((boarddata + 0x8000) & 0xffff);
480 static void pci20xxx_dio_config(struct comedi_device *dev,
481 struct comedi_subdevice *s);
482 static int pci20xxx_dio_insn_bits(struct comedi_device *dev,
483 struct comedi_subdevice *s,
484 struct comedi_insn *insn, unsigned int *data);
485 static int pci20xxx_dio_insn_config(struct comedi_device *dev,
486 struct comedi_subdevice *s,
487 struct comedi_insn *insn,
490 /* initialize struct pci20xxx_private */
491 static int pci20xxx_dio_init(struct comedi_device *dev,
492 struct comedi_subdevice *s)
495 s->type = COMEDI_SUBD_DIO;
496 s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
498 s->insn_bits = pci20xxx_dio_insn_bits;
499 s->insn_config = pci20xxx_dio_insn_config;
501 s->len_chanlist = 32;
502 s->range_table = &range_digital;
505 /* digital I/O lines default to input on board reset. */
506 pci20xxx_dio_config(dev, s);
511 static int pci20xxx_dio_insn_config(struct comedi_device *dev,
512 struct comedi_subdevice *s,
513 struct comedi_insn *insn,
518 mask = 1 << CR_CHAN(insn->chanspec);
519 if (mask & 0x000000ff)
521 else if (mask & 0x0000ff00)
523 else if (mask & 0x00ff0000)
531 pci20xxx_dio_config(dev, s);
536 static int pci20xxx_dio_insn_bits(struct comedi_device *dev,
537 struct comedi_subdevice *s,
538 struct comedi_insn *insn, unsigned int *data)
540 struct pci20xxx_private *devpriv = dev->private;
541 unsigned int mask = data[0];
544 s->state |= (mask & data[1]);
547 if (mask & 0x000000ff)
548 writeb((s->state >> 0) & 0xff,
549 devpriv->ioaddr + PCI20000_DIO_0);
550 if (mask & 0x0000ff00)
551 writeb((s->state >> 8) & 0xff,
552 devpriv->ioaddr + PCI20000_DIO_1);
553 if (mask & 0x00ff0000)
554 writeb((s->state >> 16) & 0xff,
555 devpriv->ioaddr + PCI20000_DIO_2);
556 if (mask & 0xff000000)
557 writeb((s->state >> 24) & 0xff,
558 devpriv->ioaddr + PCI20000_DIO_3);
560 data[1] = readb(devpriv->ioaddr + PCI20000_DIO_0);
561 data[1] |= readb(devpriv->ioaddr + PCI20000_DIO_1) << 8;
562 data[1] |= readb(devpriv->ioaddr + PCI20000_DIO_2) << 16;
563 data[1] |= readb(devpriv->ioaddr + PCI20000_DIO_3) << 24;
568 static void pci20xxx_dio_config(struct comedi_device *dev,
569 struct comedi_subdevice *s)
571 struct pci20xxx_private *devpriv = dev->private;
572 unsigned char control_01;
573 unsigned char control_23;
574 unsigned char buffer;
576 control_01 = readb(devpriv->ioaddr + PCI20000_DIO_CONTROL_01);
577 control_23 = readb(devpriv->ioaddr + PCI20000_DIO_CONTROL_23);
578 buffer = readb(devpriv->ioaddr + PCI20000_DIO_BUFFER);
580 if (s->io_bits & 0x000000ff) {
582 control_01 &= PCI20000_DIO_EOC;
583 buffer = (buffer & (~(DIO_BE << DIO_PS_0))) | (DIO_BO <<
587 control_01 = (control_01 & DIO_CAND) | PCI20000_DIO_EIC;
588 buffer = (buffer & (~(DIO_BI << DIO_PS_0)));
590 if (s->io_bits & 0x0000ff00) {
592 control_01 &= PCI20000_DIO_OOC;
593 buffer = (buffer & (~(DIO_BE << DIO_PS_1))) | (DIO_BO <<
597 control_01 = (control_01 & DIO_CAND) | PCI20000_DIO_OIC;
598 buffer = (buffer & (~(DIO_BI << DIO_PS_1)));
600 if (s->io_bits & 0x00ff0000) {
602 control_23 &= PCI20000_DIO_EOC;
603 buffer = (buffer & (~(DIO_BE << DIO_PS_2))) | (DIO_BO <<
607 control_23 = (control_23 & DIO_CAND) | PCI20000_DIO_EIC;
608 buffer = (buffer & (~(DIO_BI << DIO_PS_2)));
610 if (s->io_bits & 0xff000000) {
612 control_23 &= PCI20000_DIO_OOC;
613 buffer = (buffer & (~(DIO_BE << DIO_PS_3))) | (DIO_BO <<
617 control_23 = (control_23 & DIO_CAND) | PCI20000_DIO_OIC;
618 buffer = (buffer & (~(DIO_BI << DIO_PS_3)));
620 writeb(control_01, devpriv->ioaddr + PCI20000_DIO_CONTROL_01);
621 writeb(control_23, devpriv->ioaddr + PCI20000_DIO_CONTROL_23);
622 writeb(buffer, devpriv->ioaddr + PCI20000_DIO_BUFFER);
626 static void pci20xxx_do(struct comedi_device *dev, struct comedi_subdevice *s)
628 struct pci20xxx_private *devpriv = dev->private;
630 /* XXX if the channel is configured for input, does this
632 /* XXX it would be a good idea to only update the registers
633 that _need_ to be updated. This requires changes to
635 writeb((s->state >> 0) & 0xff, devpriv->ioaddr + PCI20000_DIO_0);
636 writeb((s->state >> 8) & 0xff, devpriv->ioaddr + PCI20000_DIO_1);
637 writeb((s->state >> 16) & 0xff, devpriv->ioaddr + PCI20000_DIO_2);
638 writeb((s->state >> 24) & 0xff, devpriv->ioaddr + PCI20000_DIO_3);
641 static unsigned int pci20xxx_di(struct comedi_device *dev,
642 struct comedi_subdevice *s)
644 struct pci20xxx_private *devpriv = dev->private;
647 /* XXX same note as above */
648 bits = readb(devpriv->ioaddr + PCI20000_DIO_0);
649 bits |= readb(devpriv->ioaddr + PCI20000_DIO_1) << 8;
650 bits |= readb(devpriv->ioaddr + PCI20000_DIO_2) << 16;
651 bits |= readb(devpriv->ioaddr + PCI20000_DIO_3) << 24;
657 static struct comedi_driver pci20xxx_driver = {
658 .driver_name = "ii_pci20kc",
659 .module = THIS_MODULE,
660 .attach = pci20xxx_attach,
661 .detach = pci20xxx_detach,
663 module_comedi_driver(pci20xxx_driver);
665 MODULE_AUTHOR("Comedi http://www.comedi.org");
666 MODULE_DESCRIPTION("Comedi low-level driver");
667 MODULE_LICENSE("GPL");