4 Header for ni_labpc.c and ni_labpc_cs.c
6 Copyright (C) 2003 Frank Mori Hess <fmhess@users.sourceforge.net>
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
27 #define EEPROM_SIZE 256 /* 256 byte eeprom */
28 #define NUM_AO_CHAN 2 /* boards have two analog output channels */
30 enum labpc_bustype { isa_bustype, pci_bustype, pcmcia_bustype };
31 enum labpc_register_layout { labpc_plus_layout, labpc_1200_layout };
32 enum transfer_type { fifo_not_empty_transfer, fifo_half_full_transfer,
36 struct labpc_board_struct {
38 int device_id; /* device id for pci and pcmcia boards */
39 int ai_speed; /* maximum input speed in nanoseconds */
40 enum labpc_bustype bustype; /* ISA/PCI/etc. */
42 /* 1200 has extra registers compared to pc+ */
43 enum labpc_register_layout register_layout;
44 int has_ao; /* has analog output true/false */
45 const struct comedi_lrange *ai_range_table;
46 const int *ai_range_code;
47 const int *ai_range_is_unipolar;
49 /* board can auto scan up in ai channels, not just down */
50 unsigned ai_scan_up:1;
52 /* uses memory mapped io instead of ioports */
53 unsigned memory_mapped_io:1;
56 struct labpc_private {
57 struct mite_struct *mite; /* for mite chip on pci-1200 */
58 /* number of data points left to be taken */
59 volatile unsigned long long count;
60 /* software copy of analog output values */
61 unsigned int ao_value[NUM_AO_CHAN];
62 /* software copys of bits written to command registers */
63 volatile unsigned int command1_bits;
64 volatile unsigned int command2_bits;
65 volatile unsigned int command3_bits;
66 volatile unsigned int command4_bits;
67 volatile unsigned int command5_bits;
68 volatile unsigned int command6_bits;
69 /* store last read of board status registers */
70 volatile unsigned int status1_bits;
71 volatile unsigned int status2_bits;
73 * value to load into board's counter a0 (conversion pacing) for timed
76 unsigned int divisor_a0;
78 * value to load into board's counter b0 (master) for timed conversions
80 unsigned int divisor_b0;
82 * value to load into board's counter b1 (scan pacing) for timed
85 unsigned int divisor_b1;
86 unsigned int dma_chan; /* dma channel to use */
87 u16 *dma_buffer; /* buffer ai will dma into */
88 /* transfer size in bytes for current transfer */
89 unsigned int dma_transfer_size;
90 /* we are using dma/fifo-half-full/etc. */
91 enum transfer_type current_transfer;
92 /* stores contents of board's eeprom */
93 unsigned int eeprom_data[EEPROM_SIZE];
94 /* stores settings of calibration dacs */
95 unsigned int caldac[16];
97 * function pointers so we can use inb/outb or readb/writeb as
100 unsigned int (*read_byte) (unsigned long address);
101 void (*write_byte) (unsigned int byte, unsigned long address);
104 int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
105 unsigned int irq, unsigned int dma);
106 int labpc_common_detach(struct comedi_device *dev);
108 extern const int labpc_1200_is_unipolar[];
109 extern const int labpc_1200_ai_gain_bits[];
110 extern const struct comedi_lrange range_labpc_1200_ai;
112 #endif /* _NI_LABPC_H */