1 #ifndef __WINBOND_LOCALPARA_H
2 #define __WINBOND_LOCALPARA_H
4 //=============================================================
6 //=============================================================
8 #include "mac_structures.h"
10 //Define the local ability
12 #define LOCAL_DEFAULT_BEACON_PERIOD 100 //ms
13 #define LOCAL_DEFAULT_ATIM_WINDOW 0
14 #define LOCAL_DEFAULT_ERP_CAPABILITY 0x0431 //0x0001: ESS
16 //0x0020: short preamble
17 //0x0400: short slot time
18 #define LOCAL_DEFAULT_LISTEN_INTERVAL 5
20 //#define LOCAL_DEFAULT_24_CHANNEL_NUM 11 // channel 1..11
21 #define LOCAL_DEFAULT_24_CHANNEL_NUM 13 // channel 1..13
22 #define LOCAL_DEFAULT_5_CHANNEL_NUM 8 // channel 36..64
24 #define LOCAL_USA_24_CHANNEL_NUM 11
25 #define LOCAL_USA_5_CHANNEL_NUM 12
26 #define LOCAL_EUROPE_24_CHANNEL_NUM 13
27 #define LOCAL_EUROPE_5_CHANNEL_NUM 19
28 #define LOCAL_JAPAN_24_CHANNEL_NUM 14
29 #define LOCAL_JAPAN_5_CHANNEL_NUM 11
30 #define LOCAL_UNKNOWN_24_CHANNEL_NUM 14
31 #define LOCAL_UNKNOWN_5_CHANNEL_NUM 34 //not include 165
34 #define psLOCAL (&(adapter->sLocalPara))
36 #define MODE_802_11_BG 0
37 #define MODE_802_11_A 1
38 #define MODE_802_11_ABG 2
39 #define MODE_802_11_BG_IBSS 3
40 #define MODE_802_11_B 4
43 #define BAND_TYPE_DSSS 0
44 #define BAND_TYPE_OFDM_24 1
45 #define BAND_TYPE_OFDM_5 2
47 //refer Bitmap2RateValue table
48 #define LOCAL_ALL_SUPPORTED_RATES_BITMAP 0x130c1a66 //the bitmap value of all the H/W supported rates
49 //1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
50 #define LOCAL_OFDM_SUPPORTED_RATES_BITMAP 0x130c1240 //the bitmap value of all the H/W supported rates
51 //except to non-OFDM rates
52 //6, 9, 12, 18, 24, 36, 48, 54
54 #define LOCAL_11B_SUPPORTED_RATE_BITMAP 0x826
55 #define LOCAL_11B_BASIC_RATE_BITMAP 0x826
56 #define LOCAL_11B_OPERATION_RATE_BITMAP 0x826
57 #define LOCAL_11G_BASIC_RATE_BITMAP 0x826 //1, 2, 5.5, 11
58 #define LOCAL_11G_OPERATION_RATE_BITMAP 0x130c1240 //6, 9, 12, 18, 24, 36, 48, 54
59 #define LOCAL_11A_BASIC_RATE_BITMAP 0x01001040 //6, 12, 24
60 #define LOCAL_11A_OPERATION_RATE_BITMAP 0x120c0200 //9, 18, 36, 48, 54
66 #define PWR_TX_IDLE_CYCLE 6
68 //bPreambleMode and bSlotTimeMode
73 #define REGION_AUTO 0xff
74 #define REGION_UNKNOWN 0
75 #define REGION_EUROPE 1 //ETSI
76 #define REGION_JAPAN 2 //MKK
77 #define REGION_USA 3 //FCC
78 #define REGION_FRANCE 4 //FRANCE
79 #define REGION_SPAIN 5 //SPAIN
80 #define REGION_ISRAEL 6 //ISRAEL
81 //#define REGION_CANADA 7 //IC
83 #define MAX_BSS_DESCRIPT_ELEMENT 32
84 #define MAX_PMKID_CandidateList 16
86 //High byte : Event number, low byte : reason
89 #define EVENT_RCV_DEAUTH 0x0100
90 #define EVENT_JOIN_FAIL 0x0200
91 #define EVENT_AUTH_FAIL 0x0300
92 #define EVENT_ASSOC_FAIL 0x0400
93 #define EVENT_LOST_SIGNAL 0x0500
94 #define EVENT_BSS_DESCRIPT_LACK 0x0600
95 #define EVENT_COUNTERMEASURE 0x0700
96 #define EVENT_JOIN_FILTER 0x0800
98 #define EVENT_RX_BUFF_UNAVAILABLE 0x4100
100 #define EVENT_CONNECT 0x8100
101 #define EVENT_DISCONNECT 0x8200
102 #define EVENT_SCAN_REQ 0x8300
105 #define EVENT_REASON_FILTER_BASIC_RATE 0x0001
106 #define EVENT_REASON_FILTER_PRIVACY 0x0002
107 #define EVENT_REASON_FILTER_AUTH_MODE 0x0003
108 #define EVENT_REASON_TIMEOUT 0x00ff
110 // 20061108 WPS IE buffer
111 #define MAX_IE_APPEND_SIZE 256 + 4 // Due to [E id][Length][OUI][Data] may 257 bytes
113 typedef struct _ChanInfo
117 } ChanInfo, *pChanInfo;
119 typedef struct _CHAN_LIST
122 ChanInfo Channel[50]; // 100B
123 } CHAN_LIST, *psCHAN_LIST;
131 //===========================================================================
134 u8 PermanentAddress[ MAC_ADDR_LENGTH + 2 ]; // read from EPROM, manufacture set for each NetCard
135 u8 ThisMacAddress[ MAC_ADDR_LENGTH + 2 ]; // the driver will use actually.
137 u32 MTUsize; // Ind to Uplayer, Max transmission unit size
139 u8 region_INF; //region setting from INF
140 u8 region; //real region setting of the device
143 //// power-save variables
144 u8 iPowerSaveMode; // 0 indicates it is on, 1 indicates it is off
146 u8 ExcludeUnencrypted;
148 u16 CheckCountForPS; //Unit ime count for the decision to enter PS mode
149 u8 boHasTxActivity; //tx activity has occurred
150 u8 boMacPsValid; //Power save mode obtained from H/W is valid or not
153 u8 TxRateMode; // Initial, input from Registry, may be updated by GUI
154 //Tx Rate Mode: auto(DTO on), max, 1M, 2M, ..
155 u8 CurrentTxRate; // The current Tx rate
156 u8 CurrentTxRateForMng; // The current Tx rate for management frames
157 // It will be decided before connection succeeds.
158 u8 CurrentTxFallbackRate;
161 u8 BRateSet[32]; //basic rate set
162 u8 SRateSet[32]; //support rate set
166 u8 NumOfDsssRateInSRate; //number of DSSS rates in supported rate set
169 u32 dwBasicRateBitmap; //bit map of basic rates
170 u32 dwSupportRateBitmap; //bit map of all support rates including
171 //basic and operational rates
173 ////For SME/MLME handler
174 u16 wOldSTAindex; // valid when boHandover=TRUE, store old connected STA index
175 u16 wConnectedSTAindex; // Index of peerly connected AP or IBSS in
176 // the descriptionset.
177 u16 Association_ID; // The Association ID in the (Re)Association
179 u16 ListenInterval; // The listen interval when SME invoking MLME_
180 // (Re)Associate_Request().
182 struct radio_off RadioOffStatus;
185 u8 boMsRadioOff; // Ndis demands to be true when set Disassoc. OID and be false when set SSID OID.
186 u8 bAntennaNo; //which antenna
187 u8 bConnectFlag; //the connect status flag for roaming task
192 ChanInfo CurrentChan; //Current channel no. and channel band. It may be changed by scanning.
193 u8 boHandover; // Roaming, Hnadover to other AP.
196 u16 CWMax; // It may not be the real value that H/W used
197 u8 CWMin; // 255: set according to 802.11 spec.
201 u8 bMacOperationMode; // operation in 802.11b or 802.11g
202 u8 bSlotTimeMode; //AUTO, s32
203 u8 bPreambleMode; //AUTO, s32
206 u8 boProtectMechanism; // H/W will take the necessary action based on this variable
207 u8 boShortPreamble; // H/W will take the necessary action based on this variable
208 u8 boShortSlotTime; // H/W will take the necessary action based on this variable
211 u32 RSN_IE_Bitmap; //added by WS
212 u32 RSN_OUI_Type; //added by WS
215 u8 HwBssid[MAC_ADDR_LENGTH + 2];
219 u8 BssListCount; //Total count of valid descriptor indexes
220 u8 boReceiveUncorrectInfo; //important settings in beacon/probe resp. have been changed
224 u8 BssListIndex[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //Store the valid descriptor indexes obtained from scannings
225 u8 JoinerInIbss[ (MAX_BSS_DESCRIPT_ELEMENT+3) & ~0x03 ]; //save the BssDescriptor index in this
226 //IBSS. The index 0 is local descriptor
227 //(psLOCAL->wConnectedSTAindex).
228 //If CONNECTED : NoOfJoinerInIbss >=2
229 // else : NoOfJoinerInIbss <=1
231 //// General Statistics, count at Rx_handler or Tx_callback interrupt handler
232 u64 GS_XMIT_OK; // Good Frames Transmitted
233 u64 GS_RCV_OK; // Good Frames Received
234 u32 GS_RCV_ERROR; // Frames received with crc error
235 u32 GS_XMIT_ERROR; // Bad Frames Transmitted
236 u32 GS_RCV_NO_BUFFER; // Receive Buffer underrun
237 u32 GS_XMIT_ONE_COLLISION; // one collision
238 u32 GS_XMIT_MORE_COLLISIONS;// more collisions
240 //================================================================
241 // Statistics (no matter whether it had done successfully) -wkchen
242 //================================================================
245 u32 _dot11WEPExcludedCount;
246 u32 _dot11WEPUndecryptableCount;
247 u32 _dot11FrameDuplicateCount;
249 ChanInfo IbssChanSetting; // 2B. Start IBSS Channel setting by registry or WWU.
250 u8 reserved_5[2]; //It may not be used after considering RF type,
251 //region and modulation type.
253 CHAN_LIST sSupportChanList; // 86B. It will be obtained according to RF type and region
254 u8 reserved_6[2]; //two variables are for wep key error detection added by ws 02/02/04
257 u32 bToSelfPacketReceived;
258 u32 WepKeyDetectTimerCount;
263 // 20061108 WPS IE Append
264 u8 IE_Append_data[MAX_IE_APPEND_SIZE];