2 * Driver for CLPS711x serial ports
4 * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
6 * Copyright 1999 ARM Limited
7 * Copyright (C) 2000 Deep Blue Solutions Ltd.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
15 #if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
19 #include <linux/module.h>
20 #include <linux/device.h>
21 #include <linux/console.h>
22 #include <linux/serial_core.h>
23 #include <linux/serial.h>
24 #include <linux/clk.h>
26 #include <linux/tty.h>
27 #include <linux/tty_flip.h>
28 #include <linux/ioport.h>
30 #include <linux/platform_device.h>
31 #include <linux/regmap.h>
33 #include <linux/mfd/syscon.h>
34 #include <linux/mfd/syscon/clps711x.h>
36 #include "serial_mctrl_gpio.h"
38 #define UART_CLPS711X_DEVNAME "ttyCL"
39 #define UART_CLPS711X_NR 2
40 #define UART_CLPS711X_MAJOR 204
41 #define UART_CLPS711X_MINOR 40
43 #define UARTDR_OFFSET (0x00)
44 #define UBRLCR_OFFSET (0x40)
46 #define UARTDR_FRMERR (1 << 8)
47 #define UARTDR_PARERR (1 << 9)
48 #define UARTDR_OVERR (1 << 10)
50 #define UBRLCR_BAUD_MASK ((1 << 12) - 1)
51 #define UBRLCR_BREAK (1 << 12)
52 #define UBRLCR_PRTEN (1 << 13)
53 #define UBRLCR_EVENPRT (1 << 14)
54 #define UBRLCR_XSTOP (1 << 15)
55 #define UBRLCR_FIFOEN (1 << 16)
56 #define UBRLCR_WRDLEN5 (0 << 17)
57 #define UBRLCR_WRDLEN6 (1 << 17)
58 #define UBRLCR_WRDLEN7 (2 << 17)
59 #define UBRLCR_WRDLEN8 (3 << 17)
60 #define UBRLCR_WRDLEN_MASK (3 << 17)
62 struct clps711x_port {
63 struct uart_port port;
64 unsigned int tx_enabled;
66 struct regmap *syscon;
67 struct mctrl_gpios *gpios;
70 static struct uart_driver clps711x_uart = {
72 .driver_name = UART_CLPS711X_DEVNAME,
73 .dev_name = UART_CLPS711X_DEVNAME,
74 .major = UART_CLPS711X_MAJOR,
75 .minor = UART_CLPS711X_MINOR,
76 .nr = UART_CLPS711X_NR,
79 static void uart_clps711x_stop_tx(struct uart_port *port)
81 struct clps711x_port *s = dev_get_drvdata(port->dev);
84 disable_irq(port->irq);
89 static void uart_clps711x_start_tx(struct uart_port *port)
91 struct clps711x_port *s = dev_get_drvdata(port->dev);
95 enable_irq(port->irq);
99 static irqreturn_t uart_clps711x_int_rx(int irq, void *dev_id)
101 struct uart_port *port = dev_id;
102 struct clps711x_port *s = dev_get_drvdata(port->dev);
103 unsigned int status, flg;
109 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
110 if (sysflg & SYSFLG_URXFE)
113 ch = readw(port->membase + UARTDR_OFFSET);
114 status = ch & (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR);
120 if (unlikely(status)) {
121 if (status & UARTDR_PARERR)
122 port->icount.parity++;
123 else if (status & UARTDR_FRMERR)
124 port->icount.frame++;
125 else if (status & UARTDR_OVERR)
126 port->icount.overrun++;
128 status &= port->read_status_mask;
130 if (status & UARTDR_PARERR)
132 else if (status & UARTDR_FRMERR)
134 else if (status & UARTDR_OVERR)
138 if (uart_handle_sysrq_char(port, ch))
141 if (status & port->ignore_status_mask)
144 uart_insert_char(port, status, UARTDR_OVERR, ch, flg);
147 tty_flip_buffer_push(&port->state->port);
152 static irqreturn_t uart_clps711x_int_tx(int irq, void *dev_id)
154 struct uart_port *port = dev_id;
155 struct clps711x_port *s = dev_get_drvdata(port->dev);
156 struct circ_buf *xmit = &port->state->xmit;
159 writew(port->x_char, port->membase + UARTDR_OFFSET);
165 if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
167 disable_irq_nosync(port->irq);
173 while (!uart_circ_empty(xmit)) {
176 writew(xmit->buf[xmit->tail], port->membase + UARTDR_OFFSET);
177 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
180 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
181 if (sysflg & SYSFLG_UTXFF)
185 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
186 uart_write_wakeup(port);
191 static unsigned int uart_clps711x_tx_empty(struct uart_port *port)
193 struct clps711x_port *s = dev_get_drvdata(port->dev);
196 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
198 return (sysflg & SYSFLG_UBUSY) ? 0 : TIOCSER_TEMT;
201 static unsigned int uart_clps711x_get_mctrl(struct uart_port *port)
203 unsigned int result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR;
204 struct clps711x_port *s = dev_get_drvdata(port->dev);
206 return mctrl_gpio_get(s->gpios, &result);
209 static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl)
211 struct clps711x_port *s = dev_get_drvdata(port->dev);
213 mctrl_gpio_set(s->gpios, mctrl);
216 static void uart_clps711x_break_ctl(struct uart_port *port, int break_state)
220 ubrlcr = readl(port->membase + UBRLCR_OFFSET);
222 ubrlcr |= UBRLCR_BREAK;
224 ubrlcr &= ~UBRLCR_BREAK;
225 writel(ubrlcr, port->membase + UBRLCR_OFFSET);
228 static void uart_clps711x_set_ldisc(struct uart_port *port, int ld)
231 struct clps711x_port *s = dev_get_drvdata(port->dev);
233 regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON1_SIREN,
234 (ld == N_IRDA) ? SYSCON1_SIREN : 0);
238 static int uart_clps711x_startup(struct uart_port *port)
240 struct clps711x_port *s = dev_get_drvdata(port->dev);
243 writel(readl(port->membase + UBRLCR_OFFSET) & ~UBRLCR_BREAK,
244 port->membase + UBRLCR_OFFSET);
246 /* Enable the port */
247 return regmap_update_bits(s->syscon, SYSCON_OFFSET,
248 SYSCON_UARTEN, SYSCON_UARTEN);
251 static void uart_clps711x_shutdown(struct uart_port *port)
253 struct clps711x_port *s = dev_get_drvdata(port->dev);
255 /* Disable the port */
256 regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
259 static void uart_clps711x_set_termios(struct uart_port *port,
260 struct ktermios *termios,
261 struct ktermios *old)
264 unsigned int baud, quot;
266 /* Mask termios capabilities we don't support */
267 termios->c_cflag &= ~CMSPAR;
268 termios->c_iflag &= ~(BRKINT | IGNBRK);
270 /* Ask the core to calculate the divisor for us */
271 baud = uart_get_baud_rate(port, termios, old, port->uartclk / 4096,
273 quot = uart_get_divisor(port, baud);
275 switch (termios->c_cflag & CSIZE) {
277 ubrlcr = UBRLCR_WRDLEN5;
280 ubrlcr = UBRLCR_WRDLEN6;
283 ubrlcr = UBRLCR_WRDLEN7;
287 ubrlcr = UBRLCR_WRDLEN8;
291 if (termios->c_cflag & CSTOPB)
292 ubrlcr |= UBRLCR_XSTOP;
294 if (termios->c_cflag & PARENB) {
295 ubrlcr |= UBRLCR_PRTEN;
296 if (!(termios->c_cflag & PARODD))
297 ubrlcr |= UBRLCR_EVENPRT;
301 ubrlcr |= UBRLCR_FIFOEN;
303 /* Set read status mask */
304 port->read_status_mask = UARTDR_OVERR;
305 if (termios->c_iflag & INPCK)
306 port->read_status_mask |= UARTDR_PARERR | UARTDR_FRMERR;
308 /* Set status ignore mask */
309 port->ignore_status_mask = 0;
310 if (!(termios->c_cflag & CREAD))
311 port->ignore_status_mask |= UARTDR_OVERR | UARTDR_PARERR |
314 uart_update_timeout(port, termios->c_cflag, baud);
316 writel(ubrlcr | (quot - 1), port->membase + UBRLCR_OFFSET);
319 static const char *uart_clps711x_type(struct uart_port *port)
321 return (port->type == PORT_CLPS711X) ? "CLPS711X" : NULL;
324 static void uart_clps711x_config_port(struct uart_port *port, int flags)
326 if (flags & UART_CONFIG_TYPE)
327 port->type = PORT_CLPS711X;
330 static void uart_clps711x_nop_void(struct uart_port *port)
334 static int uart_clps711x_nop_int(struct uart_port *port)
339 static const struct uart_ops uart_clps711x_ops = {
340 .tx_empty = uart_clps711x_tx_empty,
341 .set_mctrl = uart_clps711x_set_mctrl,
342 .get_mctrl = uart_clps711x_get_mctrl,
343 .stop_tx = uart_clps711x_stop_tx,
344 .start_tx = uart_clps711x_start_tx,
345 .stop_rx = uart_clps711x_nop_void,
346 .break_ctl = uart_clps711x_break_ctl,
347 .set_ldisc = uart_clps711x_set_ldisc,
348 .startup = uart_clps711x_startup,
349 .shutdown = uart_clps711x_shutdown,
350 .set_termios = uart_clps711x_set_termios,
351 .type = uart_clps711x_type,
352 .config_port = uart_clps711x_config_port,
353 .release_port = uart_clps711x_nop_void,
354 .request_port = uart_clps711x_nop_int,
357 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
358 static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
360 struct clps711x_port *s = dev_get_drvdata(port->dev);
363 /* Wait for FIFO is not full */
365 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
366 } while (sysflg & SYSFLG_UTXFF);
368 writew(ch, port->membase + UARTDR_OFFSET);
371 static void uart_clps711x_console_write(struct console *co, const char *c,
374 struct uart_port *port = clps711x_uart.state[co->index].uart_port;
375 struct clps711x_port *s = dev_get_drvdata(port->dev);
378 uart_console_write(port, c, n, uart_clps711x_console_putchar);
380 /* Wait for transmitter to become empty */
382 regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg);
383 } while (sysflg & SYSFLG_UBUSY);
386 static int uart_clps711x_console_setup(struct console *co, char *options)
388 int baud = 38400, bits = 8, parity = 'n', flow = 'n';
389 int ret, index = co->index;
390 struct clps711x_port *s;
391 struct uart_port *port;
395 if (index < 0 || index >= UART_CLPS711X_NR)
398 port = clps711x_uart.state[index].uart_port;
402 s = dev_get_drvdata(port->dev);
407 regmap_read(s->syscon, SYSCON_OFFSET, &syscon);
408 if (syscon & SYSCON_UARTEN) {
409 ubrlcr = readl(port->membase + UBRLCR_OFFSET);
411 if (ubrlcr & UBRLCR_PRTEN) {
412 if (ubrlcr & UBRLCR_EVENPRT)
418 if ((ubrlcr & UBRLCR_WRDLEN_MASK) == UBRLCR_WRDLEN7)
421 quot = ubrlcr & UBRLCR_BAUD_MASK;
422 baud = port->uartclk / (16 * (quot + 1));
425 uart_parse_options(options, &baud, &parity, &bits, &flow);
427 ret = uart_set_options(port, co, baud, parity, bits, flow);
431 return regmap_update_bits(s->syscon, SYSCON_OFFSET,
432 SYSCON_UARTEN, SYSCON_UARTEN);
435 static struct console clps711x_console = {
436 .name = UART_CLPS711X_DEVNAME,
437 .device = uart_console_device,
438 .write = uart_clps711x_console_write,
439 .setup = uart_clps711x_console_setup,
440 .flags = CON_PRINTBUFFER,
445 static int uart_clps711x_probe(struct platform_device *pdev)
447 struct device_node *np = pdev->dev.of_node;
448 int ret, index = np ? of_alias_get_id(np, "serial") : pdev->id;
449 struct clps711x_port *s;
450 struct resource *res;
451 struct clk *uart_clk;
453 if (index < 0 || index >= UART_CLPS711X_NR)
456 s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL);
460 uart_clk = devm_clk_get(&pdev->dev, NULL);
461 if (IS_ERR(uart_clk))
462 return PTR_ERR(uart_clk);
464 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
465 s->port.membase = devm_ioremap_resource(&pdev->dev, res);
466 if (IS_ERR(s->port.membase))
467 return PTR_ERR(s->port.membase);
469 s->port.irq = platform_get_irq(pdev, 0);
470 if (IS_ERR_VALUE(s->port.irq))
473 s->rx_irq = platform_get_irq(pdev, 1);
474 if (IS_ERR_VALUE(s->rx_irq))
480 sprintf(syscon_name, "syscon.%i", index + 1);
481 s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name);
482 if (IS_ERR(s->syscon))
483 return PTR_ERR(s->syscon);
485 s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon");
486 if (IS_ERR(s->syscon))
487 return PTR_ERR(s->syscon);
490 s->port.line = index;
491 s->port.dev = &pdev->dev;
492 s->port.iotype = UPIO_MEM32;
493 s->port.mapbase = res->start;
494 s->port.type = PORT_CLPS711X;
495 s->port.fifosize = 16;
496 s->port.flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
497 s->port.uartclk = clk_get_rate(uart_clk);
498 s->port.ops = &uart_clps711x_ops;
500 platform_set_drvdata(pdev, s);
502 s->gpios = mctrl_gpio_init(&pdev->dev, 0);
504 ret = uart_add_one_port(&clps711x_uart, &s->port);
509 if (!uart_console(&s->port))
510 regmap_update_bits(s->syscon, SYSCON_OFFSET, SYSCON_UARTEN, 0);
514 ret = devm_request_irq(&pdev->dev, s->port.irq, uart_clps711x_int_tx, 0,
515 dev_name(&pdev->dev), &s->port);
517 uart_remove_one_port(&clps711x_uart, &s->port);
521 ret = devm_request_irq(&pdev->dev, s->rx_irq, uart_clps711x_int_rx, 0,
522 dev_name(&pdev->dev), &s->port);
524 uart_remove_one_port(&clps711x_uart, &s->port);
529 static int uart_clps711x_remove(struct platform_device *pdev)
531 struct clps711x_port *s = platform_get_drvdata(pdev);
533 return uart_remove_one_port(&clps711x_uart, &s->port);
536 static const struct of_device_id __maybe_unused clps711x_uart_dt_ids[] = {
537 { .compatible = "cirrus,clps711x-uart", },
540 MODULE_DEVICE_TABLE(of, clps711x_uart_dt_ids);
542 static struct platform_driver clps711x_uart_platform = {
544 .name = "clps711x-uart",
545 .owner = THIS_MODULE,
546 .of_match_table = of_match_ptr(clps711x_uart_dt_ids),
548 .probe = uart_clps711x_probe,
549 .remove = uart_clps711x_remove,
552 static int __init uart_clps711x_init(void)
556 #ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
557 clps711x_uart.cons = &clps711x_console;
558 clps711x_console.data = &clps711x_uart;
561 ret = uart_register_driver(&clps711x_uart);
565 return platform_driver_register(&clps711x_uart_platform);
567 module_init(uart_clps711x_init);
569 static void __exit uart_clps711x_exit(void)
571 platform_driver_unregister(&clps711x_uart_platform);
572 uart_unregister_driver(&clps711x_uart);
574 module_exit(uart_clps711x_exit);
576 MODULE_AUTHOR("Deep Blue Solutions Ltd");
577 MODULE_DESCRIPTION("CLPS711X serial driver");
578 MODULE_LICENSE("GPL");