drivers/usb/chipidea/usbmisc_imx.c

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <linux/module.h>
  13 #include <linux/of_platform.h>
  14 #include <linux/err.h>
  15 #include <linux/io.h>
  16 #include <linux/delay.h>
  17
  18 #include "ci_hdrc_imx.h"
  19
  20 #define MX25_USB_PHY_CTRL_OFFSET        0x08
  21 #define MX25_BM_EXTERNAL_VBUS_DIVIDER   BIT(23)
  22
  23 #define MX25_EHCI_INTERFACE_SINGLE_UNI  (2 << 0)
  24 #define MX25_EHCI_INTERFACE_DIFF_UNI    (0 << 0)
  25 #define MX25_EHCI_INTERFACE_MASK        (0xf)
  26
  27 #define MX25_OTG_SIC_SHIFT              29
  28 #define MX25_OTG_SIC_MASK               (0x3 << MX25_OTG_SIC_SHIFT)
  29 #define MX25_OTG_PM_BIT                 BIT(24)
  30 #define MX25_OTG_PP_BIT                 BIT(11)
  31 #define MX25_OTG_OCPOL_BIT              BIT(3)
  32
  33 #define MX25_H1_SIC_SHIFT               21
  34 #define MX25_H1_SIC_MASK                (0x3 << MX25_H1_SIC_SHIFT)
  35 #define MX25_H1_PP_BIT                  BIT(18)
  36 #define MX25_H1_PM_BIT                  BIT(16)
  37 #define MX25_H1_IPPUE_UP_BIT            BIT(7)
  38 #define MX25_H1_IPPUE_DOWN_BIT          BIT(6)
  39 #define MX25_H1_TLL_BIT                 BIT(5)
  40 #define MX25_H1_USBTE_BIT               BIT(4)
  41 #define MX25_H1_OCPOL_BIT               BIT(2)
  42
  43 #define MX27_H1_PM_BIT                  BIT(8)
  44 #define MX27_H2_PM_BIT                  BIT(16)
  45 #define MX27_OTG_PM_BIT                 BIT(24)
  46
  47 #define MX53_USB_OTG_PHY_CTRL_0_OFFSET  0x08
  48 #define MX53_USB_OTG_PHY_CTRL_1_OFFSET  0x0c
  49 #define MX53_USB_CTRL_1_OFFSET          0x10
  50 #define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK (0x11 << 2)
  51 #define MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI BIT(2)
  52 #define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK (0x11 << 6)
  53 #define MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI BIT(6)
  54 #define MX53_USB_UH2_CTRL_OFFSET        0x14
  55 #define MX53_USB_UH3_CTRL_OFFSET        0x18
  56 #define MX53_USB_CLKONOFF_CTRL_OFFSET   0x24
  57 #define MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF BIT(21)
  58 #define MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF BIT(22)
  59 #define MX53_BM_OVER_CUR_DIS_H1         BIT(5)
  60 #define MX53_BM_OVER_CUR_DIS_OTG        BIT(8)
  61 #define MX53_BM_OVER_CUR_DIS_UHx        BIT(30)
  62 #define MX53_USB_CTRL_1_UH2_ULPI_EN     BIT(26)
  63 #define MX53_USB_CTRL_1_UH3_ULPI_EN     BIT(27)
  64 #define MX53_USB_UHx_CTRL_WAKE_UP_EN    BIT(7)
  65 #define MX53_USB_UHx_CTRL_ULPI_INT_EN   BIT(8)
  66 #define MX53_USB_PHYCTRL1_PLLDIV_MASK   0x3
  67 #define MX53_USB_PLL_DIV_24_MHZ         0x01
  68
  69 #define MX6_BM_NON_BURST_SETTING        BIT(1)
  70 #define MX6_BM_OVER_CUR_DIS             BIT(7)
  71 #define MX6_BM_OVER_CUR_POLARITY        BIT(8)
  72 #define MX6_BM_WAKEUP_ENABLE            BIT(10)
  73 #define MX6_BM_ID_WAKEUP                BIT(16)
  74 #define MX6_BM_VBUS_WAKEUP              BIT(17)
  75 #define MX6SX_BM_DPDM_WAKEUP_EN         BIT(29)
  76 #define MX6_BM_WAKEUP_INTR              BIT(31)
  77 #define MX6_USB_OTG1_PHY_CTRL           0x18
  78 /* For imx6dql, it is host-only controller, for later imx6, it is otg's */
  79 #define MX6_USB_OTG2_PHY_CTRL           0x1c
  80 #define MX6SX_USB_VBUS_WAKEUP_SOURCE(v) (v << 8)
  81 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_VBUS       MX6SX_USB_VBUS_WAKEUP_SOURCE(0)
  82 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_AVALID     MX6SX_USB_VBUS_WAKEUP_SOURCE(1)
  83 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID     MX6SX_USB_VBUS_WAKEUP_SOURCE(2)
  84 #define MX6SX_USB_VBUS_WAKEUP_SOURCE_SESS_END   MX6SX_USB_VBUS_WAKEUP_SOURCE(3)
  85
  86 #define VF610_OVER_CUR_DIS              BIT(7)
  87
  88 #define MX7D_USBNC_USB_CTRL2            0x4
  89 #define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK        0x3
  90 #define MX7D_USB_VBUS_WAKEUP_SOURCE(v)          (v << 0)
  91 #define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS        MX7D_USB_VBUS_WAKEUP_SOURCE(0)
  92 #define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID      MX7D_USB_VBUS_WAKEUP_SOURCE(1)
  93 #define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID      MX7D_USB_VBUS_WAKEUP_SOURCE(2)
  94 #define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END    MX7D_USB_VBUS_WAKEUP_SOURCE(3)
  95
  96 struct usbmisc_ops {
  97         /* It's called once when probe a usb device */
  98         int (*init)(struct imx_usbmisc_data *data);
  99         /* It's called once after adding a usb device */
 100         int (*post)(struct imx_usbmisc_data *data);
 101         /* It's called when we need to enable/disable usb wakeup */
 102         int (*set_wakeup)(struct imx_usbmisc_data *data, bool enabled);
 103 };
 104
 105 struct imx_usbmisc {
 106         void __iomem *base;
 107         spinlock_t lock;
 108         const struct usbmisc_ops *ops;
 109 };
 110
 111 static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
 112 {
 113         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 114         unsigned long flags;
 115         u32 val = 0;
 116
 117         if (data->index > 1)
 118                 return -EINVAL;
 119
 120         spin_lock_irqsave(&usbmisc->lock, flags);
 121         switch (data->index) {
 122         case 0:
 123                 val = readl(usbmisc->base);
 124                 val &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PP_BIT);
 125                 val |= (MX25_EHCI_INTERFACE_DIFF_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
 126                 val |= (MX25_OTG_PM_BIT | MX25_OTG_OCPOL_BIT);
 127                 writel(val, usbmisc->base);
 128                 break;
 129         case 1:
 130                 val = readl(usbmisc->base);
 131                 val &= ~(MX25_H1_SIC_MASK | MX25_H1_PP_BIT |  MX25_H1_IPPUE_UP_BIT);
 132                 val |= (MX25_EHCI_INTERFACE_SINGLE_UNI & MX25_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
 133                 val |= (MX25_H1_PM_BIT | MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT |
 134                         MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT);
 135
 136                 writel(val, usbmisc->base);
 137
 138                 break;
 139         }
 140         spin_unlock_irqrestore(&usbmisc->lock, flags);
 141
 142         return 0;
 143 }
 144
 145 static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
 146 {
 147         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 148         void __iomem *reg;
 149         unsigned long flags;
 150         u32 val;
 151
 152         if (data->index > 2)
 153                 return -EINVAL;
 154
 155         if (data->evdo) {
 156                 spin_lock_irqsave(&usbmisc->lock, flags);
 157                 reg = usbmisc->base + MX25_USB_PHY_CTRL_OFFSET;
 158                 val = readl(reg);
 159                 writel(val | MX25_BM_EXTERNAL_VBUS_DIVIDER, reg);
 160                 spin_unlock_irqrestore(&usbmisc->lock, flags);
 161                 usleep_range(5000, 10000); /* needed to stabilize voltage */
 162         }
 163
 164         return 0;
 165 }
 166
 167 static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
 168 {
 169         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 170         unsigned long flags;
 171         u32 val;
 172
 173         switch (data->index) {
 174         case 0:
 175                 val = MX27_OTG_PM_BIT;
 176                 break;
 177         case 1:
 178                 val = MX27_H1_PM_BIT;
 179                 break;
 180         case 2:
 181                 val = MX27_H2_PM_BIT;
 182                 break;
 183         default:
 184                 return -EINVAL;
 185         }
 186
 187         spin_lock_irqsave(&usbmisc->lock, flags);
 188         if (data->disable_oc)
 189                 val = readl(usbmisc->base) | val;
 190         else
 191                 val = readl(usbmisc->base) & ~val;
 192         writel(val, usbmisc->base);
 193         spin_unlock_irqrestore(&usbmisc->lock, flags);
 194
 195         return 0;
 196 }
 197
 198 static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
 199 {
 200         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 201         void __iomem *reg = NULL;
 202         unsigned long flags;
 203         u32 val = 0;
 204
 205         if (data->index > 3)
 206                 return -EINVAL;
 207
 208         /* Select a 24 MHz reference clock for the PHY  */
 209         val = readl(usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
 210         val &= ~MX53_USB_PHYCTRL1_PLLDIV_MASK;
 211         val |= MX53_USB_PLL_DIV_24_MHZ;
 212         writel(val, usbmisc->base + MX53_USB_OTG_PHY_CTRL_1_OFFSET);
 213
 214         spin_lock_irqsave(&usbmisc->lock, flags);
 215
 216         switch (data->index) {
 217         case 0:
 218                 if (data->disable_oc) {
 219                         reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
 220                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_OTG;
 221                         writel(val, reg);
 222                 }
 223                 break;
 224         case 1:
 225                 if (data->disable_oc) {
 226                         reg = usbmisc->base + MX53_USB_OTG_PHY_CTRL_0_OFFSET;
 227                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_H1;
 228                         writel(val, reg);
 229                 }
 230                 break;
 231         case 2:
 232                 if (data->ulpi) {
 233                         /* set USBH2 into ULPI-mode. */
 234                         reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
 235                         val = readl(reg) | MX53_USB_CTRL_1_UH2_ULPI_EN;
 236                         /* select ULPI clock */
 237                         val &= ~MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_MASK;
 238                         val |= MX53_USB_CTRL_1_H2_XCVR_CLK_SEL_ULPI;
 239                         writel(val, reg);
 240                         /* Set interrupt wake up enable */
 241                         reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
 242                         val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
 243                                 | MX53_USB_UHx_CTRL_ULPI_INT_EN;
 244                         writel(val, reg);
 245                         /* Disable internal 60Mhz clock */
 246                         reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
 247                         val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H2_INT60CKOFF;
 248                         writel(val, reg);
 249                 }
 250                 if (data->disable_oc) {
 251                         reg = usbmisc->base + MX53_USB_UH2_CTRL_OFFSET;
 252                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
 253                         writel(val, reg);
 254                 }
 255                 break;
 256         case 3:
 257                 if (data->ulpi) {
 258                         /* set USBH3 into ULPI-mode. */
 259                         reg = usbmisc->base + MX53_USB_CTRL_1_OFFSET;
 260                         val = readl(reg) | MX53_USB_CTRL_1_UH3_ULPI_EN;
 261                         /* select ULPI clock */
 262                         val &= ~MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_MASK;
 263                         val |= MX53_USB_CTRL_1_H3_XCVR_CLK_SEL_ULPI;
 264                         writel(val, reg);
 265                         /* Set interrupt wake up enable */
 266                         reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
 267                         val = readl(reg) | MX53_USB_UHx_CTRL_WAKE_UP_EN
 268                                 | MX53_USB_UHx_CTRL_ULPI_INT_EN;
 269                         writel(val, reg);
 270                         /* Disable internal 60Mhz clock */
 271                         reg = usbmisc->base + MX53_USB_CLKONOFF_CTRL_OFFSET;
 272                         val = readl(reg) | MX53_USB_CLKONOFF_CTRL_H3_INT60CKOFF;
 273                         writel(val, reg);
 274                 }
 275                 if (data->disable_oc) {
 276                         reg = usbmisc->base + MX53_USB_UH3_CTRL_OFFSET;
 277                         val = readl(reg) | MX53_BM_OVER_CUR_DIS_UHx;
 278                         writel(val, reg);
 279                 }
 280                 break;
 281         }
 282
 283         spin_unlock_irqrestore(&usbmisc->lock, flags);
 284
 285         return 0;
 286 }
 287
 288 static int usbmisc_imx6q_set_wakeup
 289         (struct imx_usbmisc_data *data, bool enabled)
 290 {
 291         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 292         unsigned long flags;
 293         u32 val;
 294         u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
 295                 MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
 296         int ret = 0;
 297
 298         if (data->index > 3)
 299                 return -EINVAL;
 300
 301         spin_lock_irqsave(&usbmisc->lock, flags);
 302         val = readl(usbmisc->base + data->index * 4);
 303         if (enabled) {
 304                 val |= wakeup_setting;
 305                 writel(val, usbmisc->base + data->index * 4);
 306         } else {
 307                 if (val & MX6_BM_WAKEUP_INTR)
 308                         pr_debug("wakeup int at ci_hdrc.%d\n", data->index);
 309                 val &= ~wakeup_setting;
 310                 writel(val, usbmisc->base + data->index * 4);
 311         }
 312         spin_unlock_irqrestore(&usbmisc->lock, flags);
 313
 314         return ret;
 315 }
 316
 317 static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
 318 {
 319         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 320         unsigned long flags;
 321         u32 reg;
 322
 323         if (data->index > 3)
 324                 return -EINVAL;
 325
 326         spin_lock_irqsave(&usbmisc->lock, flags);
 327
 328         reg = readl(usbmisc->base + data->index * 4);
 329         if (data->disable_oc) {
 330                 reg |= MX6_BM_OVER_CUR_DIS;
 331         } else if (data->oc_polarity == 1) {
 332                 /* High active */
 333                 reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
 334         }
 335         writel(reg, usbmisc->base + data->index * 4);
 336
 337         /* SoC non-burst setting */
 338         reg = readl(usbmisc->base + data->index * 4);
 339         writel(reg | MX6_BM_NON_BURST_SETTING,
 340                         usbmisc->base + data->index * 4);
 341
 342         spin_unlock_irqrestore(&usbmisc->lock, flags);
 343
 344         usbmisc_imx6q_set_wakeup(data, false);
 345
 346         return 0;
 347 }
 348
 349 static int usbmisc_imx6sx_init(struct imx_usbmisc_data *data)
 350 {
 351         void __iomem *reg = NULL;
 352         unsigned long flags;
 353         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 354         u32 val;
 355
 356         usbmisc_imx6q_init(data);
 357
 358         if (data->index == 0 || data->index == 1) {
 359                 reg = usbmisc->base + MX6_USB_OTG1_PHY_CTRL + data->index * 4;
 360                 spin_lock_irqsave(&usbmisc->lock, flags);
 361                 /* Set vbus wakeup source as bvalid */
 362                 val = readl(reg);
 363                 writel(val | MX6SX_USB_VBUS_WAKEUP_SOURCE_BVALID, reg);
 364                 /*
 365                  * Disable dp/dm wakeup in device mode when vbus is
 366                  * not there.
 367                  */
 368                 val = readl(usbmisc->base + data->index * 4);
 369                 writel(val & ~MX6SX_BM_DPDM_WAKEUP_EN,
 370                         usbmisc->base + data->index * 4);
 371                 spin_unlock_irqrestore(&usbmisc->lock, flags);
 372         }
 373
 374         return 0;
 375 }
 376
 377 static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
 378 {
 379         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 380         u32 reg;
 381
 382         /*
 383          * Vybrid only has one misc register set, but in two different
 384          * areas. These is reflected in two instances of this driver.
 385          */
 386         if (data->index >= 1)
 387                 return -EINVAL;
 388
 389         if (data->disable_oc) {
 390                 reg = readl(usbmisc->base);
 391                 writel(reg | VF610_OVER_CUR_DIS, usbmisc->base);
 392         }
 393
 394         return 0;
 395 }
 396
 397 static int usbmisc_imx7d_set_wakeup
 398         (struct imx_usbmisc_data *data, bool enabled)
 399 {
 400         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 401         unsigned long flags;
 402         u32 val;
 403         u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
 404                 MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
 405
 406         spin_lock_irqsave(&usbmisc->lock, flags);
 407         val = readl(usbmisc->base);
 408         if (enabled) {
 409                 writel(val | wakeup_setting, usbmisc->base);
 410         } else {
 411                 if (val & MX6_BM_WAKEUP_INTR)
 412                         dev_dbg(data->dev, "wakeup int\n");
 413                 writel(val & ~wakeup_setting, usbmisc->base);
 414         }
 415         spin_unlock_irqrestore(&usbmisc->lock, flags);
 416
 417         return 0;
 418 }
 419
 420 static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
 421 {
 422         struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
 423         unsigned long flags;
 424         u32 reg;
 425
 426         if (data->index >= 1)
 427                 return -EINVAL;
 428
 429         spin_lock_irqsave(&usbmisc->lock, flags);
 430         reg = readl(usbmisc->base);
 431         if (data->disable_oc) {
 432                 reg |= MX6_BM_OVER_CUR_DIS;
 433         } else if (data->oc_polarity == 1) {
 434                 /* High active */
 435                 reg &= ~(MX6_BM_OVER_CUR_DIS | MX6_BM_OVER_CUR_POLARITY);
 436         }
 437         writel(reg, usbmisc->base);
 438
 439         reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
 440         reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
 441         writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
 442                  usbmisc->base + MX7D_USBNC_USB_CTRL2);
 443         spin_unlock_irqrestore(&usbmisc->lock, flags);
 444
 445         usbmisc_imx7d_set_wakeup(data, false);
 446
 447         return 0;
 448 }
 449
 450 static const struct usbmisc_ops imx25_usbmisc_ops = {
 451         .init = usbmisc_imx25_init,
 452         .post = usbmisc_imx25_post,
 453 };
 454
 455 static const struct usbmisc_ops imx27_usbmisc_ops = {
 456         .init = usbmisc_imx27_init,
 457 };
 458
 459 static const struct usbmisc_ops imx53_usbmisc_ops = {
 460         .init = usbmisc_imx53_init,
 461 };
 462
 463 static const struct usbmisc_ops imx6q_usbmisc_ops = {
 464         .set_wakeup = usbmisc_imx6q_set_wakeup,
 465         .init = usbmisc_imx6q_init,
 466 };
 467
 468 static const struct usbmisc_ops vf610_usbmisc_ops = {
 469         .init = usbmisc_vf610_init,
 470 };
 471
 472 static const struct usbmisc_ops imx6sx_usbmisc_ops = {
 473         .set_wakeup = usbmisc_imx6q_set_wakeup,
 474         .init = usbmisc_imx6sx_init,
 475 };
 476
 477 static const struct usbmisc_ops imx7d_usbmisc_ops = {
 478         .init = usbmisc_imx7d_init,
 479         .set_wakeup = usbmisc_imx7d_set_wakeup,
 480 };
 481
 482 int imx_usbmisc_init(struct imx_usbmisc_data *data)
 483 {
 484         struct imx_usbmisc *usbmisc;
 485
 486         if (!data)
 487                 return 0;
 488
 489         usbmisc = dev_get_drvdata(data->dev);
 490         if (!usbmisc->ops->init)
 491                 return 0;
 492         return usbmisc->ops->init(data);
 493 }
 494 EXPORT_SYMBOL_GPL(imx_usbmisc_init);
 495
 496 int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
 497 {
 498         struct imx_usbmisc *usbmisc;
 499
 500         if (!data)
 501                 return 0;
 502
 503         usbmisc = dev_get_drvdata(data->dev);
 504         if (!usbmisc->ops->post)
 505                 return 0;
 506         return usbmisc->ops->post(data);
 507 }
 508 EXPORT_SYMBOL_GPL(imx_usbmisc_init_post);
 509
 510 int imx_usbmisc_set_wakeup(struct imx_usbmisc_data *data, bool enabled)
 511 {
 512         struct imx_usbmisc *usbmisc;
 513
 514         if (!data)
 515                 return 0;
 516
 517         usbmisc = dev_get_drvdata(data->dev);
 518         if (!usbmisc->ops->set_wakeup)
 519                 return 0;
 520         return usbmisc->ops->set_wakeup(data, enabled);
 521 }
 522 EXPORT_SYMBOL_GPL(imx_usbmisc_set_wakeup);
 523
 524 static const struct of_device_id usbmisc_imx_dt_ids[] = {
 525         {
 526                 .compatible = "fsl,imx25-usbmisc",
 527                 .data = &imx25_usbmisc_ops,
 528         },
 529         {
 530                 .compatible = "fsl,imx35-usbmisc",
 531                 .data = &imx25_usbmisc_ops,
 532         },
 533         {
 534                 .compatible = "fsl,imx27-usbmisc",
 535                 .data = &imx27_usbmisc_ops,
 536         },
 537         {
 538                 .compatible = "fsl,imx51-usbmisc",
 539                 .data = &imx53_usbmisc_ops,
 540         },
 541         {
 542                 .compatible = "fsl,imx53-usbmisc",
 543                 .data = &imx53_usbmisc_ops,
 544         },
 545         {
 546                 .compatible = "fsl,imx6q-usbmisc",
 547                 .data = &imx6q_usbmisc_ops,
 548         },
 549         {
 550                 .compatible = "fsl,vf610-usbmisc",
 551                 .data = &vf610_usbmisc_ops,
 552         },
 553         {
 554                 .compatible = "fsl,imx6sx-usbmisc",
 555                 .data = &imx6sx_usbmisc_ops,
 556         },
 557         {
 558                 .compatible = "fsl,imx6ul-usbmisc",
 559                 .data = &imx6sx_usbmisc_ops,
 560         },
 561         {
 562                 .compatible = "fsl,imx7d-usbmisc",
 563                 .data = &imx7d_usbmisc_ops,
 564         },
 565         { /* sentinel */ }
 566 };
 567 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
 568
 569 static int usbmisc_imx_probe(struct platform_device *pdev)
 570 {
 571         struct resource *res;
 572         struct imx_usbmisc *data;
 573         const struct of_device_id *of_id;
 574
 575         of_id = of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
 576         if (!of_id)
 577                 return -ENODEV;
 578
 579         data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 580         if (!data)
 581                 return -ENOMEM;
 582
 583         spin_lock_init(&data->lock);
 584
 585         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 586         data->base = devm_ioremap_resource(&pdev->dev, res);
 587         if (IS_ERR(data->base))
 588                 return PTR_ERR(data->base);
 589
 590         data->ops = (const struct usbmisc_ops *)of_id->data;
 591         platform_set_drvdata(pdev, data);
 592
 593         return 0;
 594 }
 595
 596 static int usbmisc_imx_remove(struct platform_device *pdev)
 597 {
 598         return 0;
 599 }
 600
 601 static struct platform_driver usbmisc_imx_driver = {
 602         .probe = usbmisc_imx_probe,
 603         .remove = usbmisc_imx_remove,
 604         .driver = {
 605                 .name = "usbmisc_imx",
 606                 .of_match_table = usbmisc_imx_dt_ids,
 607          },
 608 };
 609
 610 module_platform_driver(usbmisc_imx_driver);
 611
 612 MODULE_ALIAS("platform:usbmisc-imx");
 613 MODULE_LICENSE("GPL v2");
 614 MODULE_DESCRIPTION("driver for imx usb non-core registers");
 615 MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");