2 * ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
4 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
6 * Authors: Felipe Balbi <balbi@ti.com>,
7 * Sebastian Andrzej Siewior <bigeasy@linutronix.de>
9 * This program is free software: you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 of
11 * the License as published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
19 #include <linux/kernel.h>
20 #include <linux/slab.h>
21 #include <linux/spinlock.h>
22 #include <linux/platform_device.h>
23 #include <linux/pm_runtime.h>
24 #include <linux/interrupt.h>
26 #include <linux/list.h>
27 #include <linux/dma-mapping.h>
29 #include <linux/usb/ch9.h>
30 #include <linux/usb/gadget.h>
31 #include <linux/usb/composite.h>
38 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep);
39 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
40 struct dwc3_ep *dep, struct dwc3_request *req);
42 static const char *dwc3_ep0_state_string(enum dwc3_ep0_state state)
51 case EP0_STATUS_PHASE:
52 return "Status Phase";
58 static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
59 u32 len, u32 type, bool chain)
61 struct dwc3_gadget_ep_cmd_params params;
67 dep = dwc->eps[epnum];
68 if (dep->flags & DWC3_EP_BUSY) {
69 dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name);
73 trb = &dwc->ep0_trb[dep->trb_enqueue];
78 trb->bpl = lower_32_bits(buf_dma);
79 trb->bph = upper_32_bits(buf_dma);
83 trb->ctrl |= (DWC3_TRB_CTRL_HWO
84 | DWC3_TRB_CTRL_ISP_IMI);
87 trb->ctrl |= DWC3_TRB_CTRL_CHN;
89 trb->ctrl |= (DWC3_TRB_CTRL_IOC
95 memset(¶ms, 0, sizeof(params));
96 params.param0 = upper_32_bits(dwc->ep0_trb_addr);
97 params.param1 = lower_32_bits(dwc->ep0_trb_addr);
99 trace_dwc3_prepare_trb(dep, trb);
101 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
102 DWC3_DEPCMD_STARTTRANSFER, ¶ms);
104 dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
109 dep->flags |= DWC3_EP_BUSY;
110 dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
113 dwc->ep0_next_event = DWC3_EP0_COMPLETE;
118 static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep,
119 struct dwc3_request *req)
121 struct dwc3 *dwc = dep->dwc;
123 req->request.actual = 0;
124 req->request.status = -EINPROGRESS;
125 req->epnum = dep->number;
127 list_add_tail(&req->list, &dep->pending_list);
130 * Gadget driver might not be quick enough to queue a request
131 * before we get a Transfer Not Ready event on this endpoint.
133 * In that case, we will set DWC3_EP_PENDING_REQUEST. When that
134 * flag is set, it's telling us that as soon as Gadget queues the
135 * required request, we should kick the transfer here because the
136 * IRQ we were waiting for is long gone.
138 if (dep->flags & DWC3_EP_PENDING_REQUEST) {
141 direction = !!(dep->flags & DWC3_EP0_DIR_IN);
143 if (dwc->ep0state != EP0_DATA_PHASE) {
144 dev_WARN(dwc->dev, "Unexpected pending request\n");
148 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
150 dep->flags &= ~(DWC3_EP_PENDING_REQUEST |
157 * In case gadget driver asked us to delay the STATUS phase,
160 if (dwc->delayed_status) {
163 direction = !dwc->ep0_expect_in;
164 dwc->delayed_status = false;
165 usb_gadget_set_state(&dwc->gadget, USB_STATE_CONFIGURED);
167 if (dwc->ep0state == EP0_STATUS_PHASE)
168 __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]);
170 dwc3_trace(trace_dwc3_ep0,
171 "too early for delayed status");
177 * Unfortunately we have uncovered a limitation wrt the Data Phase.
179 * Section 9.4 says we can wait for the XferNotReady(DATA) event to
180 * come before issueing Start Transfer command, but if we do, we will
181 * miss situations where the host starts another SETUP phase instead of
182 * the DATA phase. Such cases happen at least on TD.7.6 of the Link
183 * Layer Compliance Suite.
185 * The problem surfaces due to the fact that in case of back-to-back
186 * SETUP packets there will be no XferNotReady(DATA) generated and we
187 * will be stuck waiting for XferNotReady(DATA) forever.
189 * By looking at tables 9-13 and 9-14 of the Databook, we can see that
190 * it tells us to start Data Phase right away. It also mentions that if
191 * we receive a SETUP phase instead of the DATA phase, core will issue
192 * XferComplete for the DATA phase, before actually initiating it in
193 * the wire, with the TRB's status set to "SETUP_PENDING". Such status
194 * can only be used to print some debugging logs, as the core expects
195 * us to go through to the STATUS phase and start a CONTROL_STATUS TRB,
196 * just so it completes right away, without transferring anything and,
197 * only then, we can go back to the SETUP phase.
199 * Because of this scenario, SNPS decided to change the programming
200 * model of control transfers and support on-demand transfers only for
201 * the STATUS phase. To fix the issue we have now, we will always wait
202 * for gadget driver to queue the DATA phase's struct usb_request, then
203 * start it right away.
205 * If we're actually in a 2-stage transfer, we will wait for
206 * XferNotReady(STATUS).
208 if (dwc->three_stage_setup) {
211 direction = dwc->ep0_expect_in;
212 dwc->ep0state = EP0_DATA_PHASE;
214 __dwc3_ep0_do_control_data(dwc, dwc->eps[direction], req);
216 dep->flags &= ~DWC3_EP0_DIR_IN;
222 int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
225 struct dwc3_request *req = to_dwc3_request(request);
226 struct dwc3_ep *dep = to_dwc3_ep(ep);
227 struct dwc3 *dwc = dep->dwc;
233 spin_lock_irqsave(&dwc->lock, flags);
234 if (!dep->endpoint.desc) {
235 dwc3_trace(trace_dwc3_ep0,
236 "trying to queue request %p to disabled %s",
242 /* we share one TRB for ep0/1 */
243 if (!list_empty(&dep->pending_list)) {
248 dwc3_trace(trace_dwc3_ep0,
249 "queueing request %p to %s length %d state '%s'",
250 request, dep->name, request->length,
251 dwc3_ep0_state_string(dwc->ep0state));
253 ret = __dwc3_gadget_ep0_queue(dep, req);
256 spin_unlock_irqrestore(&dwc->lock, flags);
261 static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc)
265 /* reinitialize physical ep1 */
267 dep->flags = DWC3_EP_ENABLED;
269 /* stall is always issued on EP0 */
271 __dwc3_gadget_ep_set_halt(dep, 1, false);
272 dep->flags = DWC3_EP_ENABLED;
273 dwc->delayed_status = false;
275 if (!list_empty(&dep->pending_list)) {
276 struct dwc3_request *req;
278 req = next_request(&dep->pending_list);
279 dwc3_gadget_giveback(dep, req, -ECONNRESET);
282 dwc->ep0state = EP0_SETUP_PHASE;
283 dwc3_ep0_out_start(dwc);
286 int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
288 struct dwc3_ep *dep = to_dwc3_ep(ep);
289 struct dwc3 *dwc = dep->dwc;
291 dwc3_ep0_stall_and_restart(dwc);
296 int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
298 struct dwc3_ep *dep = to_dwc3_ep(ep);
299 struct dwc3 *dwc = dep->dwc;
303 spin_lock_irqsave(&dwc->lock, flags);
304 ret = __dwc3_gadget_ep0_set_halt(ep, value);
305 spin_unlock_irqrestore(&dwc->lock, flags);
310 void dwc3_ep0_out_start(struct dwc3 *dwc)
314 ret = dwc3_ep0_start_trans(dwc, 0, dwc->ctrl_req_addr, 8,
315 DWC3_TRBCTL_CONTROL_SETUP, false);
319 static struct dwc3_ep *dwc3_wIndex_to_dep(struct dwc3 *dwc, __le16 wIndex_le)
322 u32 windex = le16_to_cpu(wIndex_le);
325 epnum = (windex & USB_ENDPOINT_NUMBER_MASK) << 1;
326 if ((windex & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN)
329 dep = dwc->eps[epnum];
330 if (dep->flags & DWC3_EP_ENABLED)
336 static void dwc3_ep0_status_cmpl(struct usb_ep *ep, struct usb_request *req)
342 static int dwc3_ep0_handle_status(struct dwc3 *dwc,
343 struct usb_ctrlrequest *ctrl)
349 __le16 *response_pkt;
351 recip = ctrl->bRequestType & USB_RECIP_MASK;
353 case USB_RECIP_DEVICE:
355 * LTM will be set once we know how to set this in HW.
357 usb_status |= dwc->gadget.is_selfpowered;
359 if ((dwc->speed == DWC3_DSTS_SUPERSPEED) ||
360 (dwc->speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
361 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
362 if (reg & DWC3_DCTL_INITU1ENA)
363 usb_status |= 1 << USB_DEV_STAT_U1_ENABLED;
364 if (reg & DWC3_DCTL_INITU2ENA)
365 usb_status |= 1 << USB_DEV_STAT_U2_ENABLED;
370 case USB_RECIP_INTERFACE:
372 * Function Remote Wake Capable D0
373 * Function Remote Wakeup D1
377 case USB_RECIP_ENDPOINT:
378 dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
382 if (dep->flags & DWC3_EP_STALL)
383 usb_status = 1 << USB_ENDPOINT_HALT;
389 response_pkt = (__le16 *) dwc->setup_buf;
390 *response_pkt = cpu_to_le16(usb_status);
393 dwc->ep0_usb_req.dep = dep;
394 dwc->ep0_usb_req.request.length = sizeof(*response_pkt);
395 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
396 dwc->ep0_usb_req.request.complete = dwc3_ep0_status_cmpl;
398 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
401 static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
402 struct usb_ctrlrequest *ctrl, int set)
410 enum usb_device_state state;
412 wValue = le16_to_cpu(ctrl->wValue);
413 wIndex = le16_to_cpu(ctrl->wIndex);
414 recip = ctrl->bRequestType & USB_RECIP_MASK;
415 state = dwc->gadget.state;
418 case USB_RECIP_DEVICE:
421 case USB_DEVICE_REMOTE_WAKEUP:
424 * 9.4.1 says only only for SS, in AddressState only for
425 * default control pipe
427 case USB_DEVICE_U1_ENABLE:
428 if (state != USB_STATE_CONFIGURED)
430 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
431 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
434 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
436 reg |= DWC3_DCTL_INITU1ENA;
438 reg &= ~DWC3_DCTL_INITU1ENA;
439 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
442 case USB_DEVICE_U2_ENABLE:
443 if (state != USB_STATE_CONFIGURED)
445 if ((dwc->speed != DWC3_DSTS_SUPERSPEED) &&
446 (dwc->speed != DWC3_DSTS_SUPERSPEED_PLUS))
449 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
451 reg |= DWC3_DCTL_INITU2ENA;
453 reg &= ~DWC3_DCTL_INITU2ENA;
454 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
457 case USB_DEVICE_LTM_ENABLE:
460 case USB_DEVICE_TEST_MODE:
461 if ((wIndex & 0xff) != 0)
466 switch (wIndex >> 8) {
472 dwc->test_mode_nr = wIndex >> 8;
473 dwc->test_mode = true;
484 case USB_RECIP_INTERFACE:
486 case USB_INTRF_FUNC_SUSPEND:
487 if (wIndex & USB_INTRF_FUNC_SUSPEND_LP)
488 /* XXX enable Low power suspend */
490 if (wIndex & USB_INTRF_FUNC_SUSPEND_RW)
491 /* XXX enable remote wakeup */
499 case USB_RECIP_ENDPOINT:
501 case USB_ENDPOINT_HALT:
502 dep = dwc3_wIndex_to_dep(dwc, wIndex);
505 if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
507 ret = __dwc3_gadget_ep_set_halt(dep, set, true);
523 static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
525 enum usb_device_state state = dwc->gadget.state;
529 addr = le16_to_cpu(ctrl->wValue);
531 dwc3_trace(trace_dwc3_ep0, "invalid device address %d", addr);
535 if (state == USB_STATE_CONFIGURED) {
536 dwc3_trace(trace_dwc3_ep0,
537 "trying to set address when configured");
541 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
542 reg &= ~(DWC3_DCFG_DEVADDR_MASK);
543 reg |= DWC3_DCFG_DEVADDR(addr);
544 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
547 usb_gadget_set_state(&dwc->gadget, USB_STATE_ADDRESS);
549 usb_gadget_set_state(&dwc->gadget, USB_STATE_DEFAULT);
554 static int dwc3_ep0_delegate_req(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
558 spin_unlock(&dwc->lock);
559 ret = dwc->gadget_driver->setup(&dwc->gadget, ctrl);
560 spin_lock(&dwc->lock);
564 static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
566 enum usb_device_state state = dwc->gadget.state;
571 cfg = le16_to_cpu(ctrl->wValue);
574 case USB_STATE_DEFAULT:
577 case USB_STATE_ADDRESS:
578 ret = dwc3_ep0_delegate_req(dwc, ctrl);
579 /* if the cfg matches and the cfg is non zero */
580 if (cfg && (!ret || (ret == USB_GADGET_DELAYED_STATUS))) {
583 * only change state if set_config has already
584 * been processed. If gadget driver returns
585 * USB_GADGET_DELAYED_STATUS, we will wait
586 * to change the state on the next usb_ep_queue()
589 usb_gadget_set_state(&dwc->gadget,
590 USB_STATE_CONFIGURED);
593 * Enable transition to U1/U2 state when
594 * nothing is pending from application.
596 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
597 reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA);
598 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
602 case USB_STATE_CONFIGURED:
603 ret = dwc3_ep0_delegate_req(dwc, ctrl);
605 usb_gadget_set_state(&dwc->gadget,
614 static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
616 struct dwc3_ep *dep = to_dwc3_ep(ep);
617 struct dwc3 *dwc = dep->dwc;
631 memcpy(&timing, req->buf, sizeof(timing));
633 dwc->u1sel = timing.u1sel;
634 dwc->u1pel = timing.u1pel;
635 dwc->u2sel = le16_to_cpu(timing.u2sel);
636 dwc->u2pel = le16_to_cpu(timing.u2pel);
638 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
639 if (reg & DWC3_DCTL_INITU2ENA)
641 if (reg & DWC3_DCTL_INITU1ENA)
645 * According to Synopsys Databook, if parameter is
646 * greater than 125, a value of zero should be
647 * programmed in the register.
652 /* now that we have the time, issue DGCMD Set Sel */
653 ret = dwc3_send_gadget_generic_command(dwc,
654 DWC3_DGCMD_SET_PERIODIC_PAR, param);
658 static int dwc3_ep0_set_sel(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
661 enum usb_device_state state = dwc->gadget.state;
665 if (state == USB_STATE_DEFAULT)
668 wValue = le16_to_cpu(ctrl->wValue);
669 wLength = le16_to_cpu(ctrl->wLength);
672 dev_err(dwc->dev, "Set SEL should be 6 bytes, got %d\n",
678 * To handle Set SEL we need to receive 6 bytes from Host. So let's
679 * queue a usb_request for 6 bytes.
681 * Remember, though, this controller can't handle non-wMaxPacketSize
682 * aligned transfers on the OUT direction, so we queue a request for
683 * wMaxPacketSize instead.
686 dwc->ep0_usb_req.dep = dep;
687 dwc->ep0_usb_req.request.length = dep->endpoint.maxpacket;
688 dwc->ep0_usb_req.request.buf = dwc->setup_buf;
689 dwc->ep0_usb_req.request.complete = dwc3_ep0_set_sel_cmpl;
691 return __dwc3_gadget_ep0_queue(dep, &dwc->ep0_usb_req);
694 static int dwc3_ep0_set_isoch_delay(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
700 wValue = le16_to_cpu(ctrl->wValue);
701 wLength = le16_to_cpu(ctrl->wLength);
702 wIndex = le16_to_cpu(ctrl->wIndex);
704 if (wIndex || wLength)
708 * REVISIT It's unclear from Databook what to do with this
709 * value. For now, just cache it.
711 dwc->isoch_delay = wValue;
716 static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
720 switch (ctrl->bRequest) {
721 case USB_REQ_GET_STATUS:
722 dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS");
723 ret = dwc3_ep0_handle_status(dwc, ctrl);
725 case USB_REQ_CLEAR_FEATURE:
726 dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE");
727 ret = dwc3_ep0_handle_feature(dwc, ctrl, 0);
729 case USB_REQ_SET_FEATURE:
730 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE");
731 ret = dwc3_ep0_handle_feature(dwc, ctrl, 1);
733 case USB_REQ_SET_ADDRESS:
734 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS");
735 ret = dwc3_ep0_set_address(dwc, ctrl);
737 case USB_REQ_SET_CONFIGURATION:
738 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION");
739 ret = dwc3_ep0_set_config(dwc, ctrl);
741 case USB_REQ_SET_SEL:
742 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL");
743 ret = dwc3_ep0_set_sel(dwc, ctrl);
745 case USB_REQ_SET_ISOCH_DELAY:
746 dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
747 ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
750 dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
751 ret = dwc3_ep0_delegate_req(dwc, ctrl);
758 static void dwc3_ep0_inspect_setup(struct dwc3 *dwc,
759 const struct dwc3_event_depevt *event)
761 struct usb_ctrlrequest *ctrl = dwc->ctrl_req;
765 if (!dwc->gadget_driver)
768 trace_dwc3_ctrl_req(ctrl);
770 len = le16_to_cpu(ctrl->wLength);
772 dwc->three_stage_setup = false;
773 dwc->ep0_expect_in = false;
774 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
776 dwc->three_stage_setup = true;
777 dwc->ep0_expect_in = !!(ctrl->bRequestType & USB_DIR_IN);
778 dwc->ep0_next_event = DWC3_EP0_NRDY_DATA;
781 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
782 ret = dwc3_ep0_std_request(dwc, ctrl);
784 ret = dwc3_ep0_delegate_req(dwc, ctrl);
786 if (ret == USB_GADGET_DELAYED_STATUS)
787 dwc->delayed_status = true;
791 dwc3_ep0_stall_and_restart(dwc);
794 static void dwc3_ep0_complete_data(struct dwc3 *dwc,
795 const struct dwc3_event_depevt *event)
797 struct dwc3_request *r = NULL;
798 struct usb_request *ur;
799 struct dwc3_trb *trb;
801 unsigned transfer_size = 0;
803 unsigned remaining_ur_length;
810 epnum = event->endpoint_number;
813 dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
817 trace_dwc3_complete_trb(ep0, trb);
819 r = next_request(&ep0->pending_list);
823 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
824 if (status == DWC3_TRBSTS_SETUP_PENDING) {
825 dwc->setup_packet_pending = true;
827 dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
830 dwc3_gadget_giveback(ep0, r, -ECONNRESET);
837 remaining_ur_length = ur->length;
839 length = trb->size & DWC3_TRB_SIZE_MASK;
841 maxp = ep0->endpoint.maxpacket;
843 if (dwc->ep0_bounced) {
845 * Handle the first TRB before handling the bounce buffer if
846 * the request length is greater than the bounce buffer size
848 if (ur->length > DWC3_EP0_BOUNCE_SIZE) {
849 transfer_size = ALIGN(ur->length - maxp, maxp);
850 transferred = transfer_size - length;
851 buf = (u8 *)buf + transferred;
852 ur->actual += transferred;
853 remaining_ur_length -= transferred;
856 length = trb->size & DWC3_TRB_SIZE_MASK;
858 ep0->trb_enqueue = 0;
861 transfer_size = roundup((ur->length - transfer_size),
864 transferred = min_t(u32, remaining_ur_length,
865 transfer_size - length);
866 memcpy(buf, dwc->ep0_bounce, transferred);
868 transferred = ur->length - length;
871 ur->actual += transferred;
873 if ((epnum & 1) && ur->actual < ur->length) {
874 /* for some reason we did not get everything out */
876 dwc3_ep0_stall_and_restart(dwc);
878 dwc3_gadget_giveback(ep0, r, 0);
880 if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
881 ur->length && ur->zero) {
884 dwc->ep0_next_event = DWC3_EP0_COMPLETE;
886 ret = dwc3_ep0_start_trans(dwc, epnum,
887 dwc->ctrl_req_addr, 0,
888 DWC3_TRBCTL_CONTROL_DATA, false);
894 static void dwc3_ep0_complete_status(struct dwc3 *dwc,
895 const struct dwc3_event_depevt *event)
897 struct dwc3_request *r;
899 struct dwc3_trb *trb;
905 trace_dwc3_complete_trb(dep, trb);
907 if (!list_empty(&dep->pending_list)) {
908 r = next_request(&dep->pending_list);
910 dwc3_gadget_giveback(dep, r, 0);
913 if (dwc->test_mode) {
916 ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr);
918 dwc3_trace(trace_dwc3_ep0, "Invalid Test #%d",
920 dwc3_ep0_stall_and_restart(dwc);
925 status = DWC3_TRB_SIZE_TRBSTS(trb->size);
926 if (status == DWC3_TRBSTS_SETUP_PENDING) {
927 dwc->setup_packet_pending = true;
928 dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
931 dwc->ep0state = EP0_SETUP_PHASE;
932 dwc3_ep0_out_start(dwc);
935 static void dwc3_ep0_xfer_complete(struct dwc3 *dwc,
936 const struct dwc3_event_depevt *event)
938 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
940 dep->flags &= ~DWC3_EP_BUSY;
941 dep->resource_index = 0;
942 dwc->setup_packet_pending = false;
944 switch (dwc->ep0state) {
945 case EP0_SETUP_PHASE:
946 dwc3_trace(trace_dwc3_ep0, "Setup Phase");
947 dwc3_ep0_inspect_setup(dwc, event);
951 dwc3_trace(trace_dwc3_ep0, "Data Phase");
952 dwc3_ep0_complete_data(dwc, event);
955 case EP0_STATUS_PHASE:
956 dwc3_trace(trace_dwc3_ep0, "Status Phase");
957 dwc3_ep0_complete_status(dwc, event);
960 WARN(true, "UNKNOWN ep0state %d\n", dwc->ep0state);
964 static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
965 struct dwc3_ep *dep, struct dwc3_request *req)
969 req->direction = !!dep->number;
971 if (req->request.length == 0) {
972 ret = dwc3_ep0_start_trans(dwc, dep->number,
973 dwc->ctrl_req_addr, 0,
974 DWC3_TRBCTL_CONTROL_DATA, false);
975 } else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
976 && (dep->number == 0)) {
977 u32 transfer_size = 0;
980 ret = usb_gadget_map_request(&dwc->gadget, &req->request,
983 dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
987 maxpacket = dep->endpoint.maxpacket;
989 if (req->request.length > DWC3_EP0_BOUNCE_SIZE) {
990 transfer_size = ALIGN(req->request.length - maxpacket,
992 ret = dwc3_ep0_start_trans(dwc, dep->number,
995 DWC3_TRBCTL_CONTROL_DATA,
999 transfer_size = roundup((req->request.length - transfer_size),
1002 dwc->ep0_bounced = true;
1004 ret = dwc3_ep0_start_trans(dwc, dep->number,
1005 dwc->ep0_bounce_addr, transfer_size,
1006 DWC3_TRBCTL_CONTROL_DATA, false);
1008 ret = usb_gadget_map_request(&dwc->gadget, &req->request,
1011 dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
1015 ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma,
1016 req->request.length, DWC3_TRBCTL_CONTROL_DATA,
1023 static int dwc3_ep0_start_control_status(struct dwc3_ep *dep)
1025 struct dwc3 *dwc = dep->dwc;
1028 type = dwc->three_stage_setup ? DWC3_TRBCTL_CONTROL_STATUS3
1029 : DWC3_TRBCTL_CONTROL_STATUS2;
1031 return dwc3_ep0_start_trans(dwc, dep->number,
1032 dwc->ctrl_req_addr, 0, type, false);
1035 static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep)
1037 WARN_ON(dwc3_ep0_start_control_status(dep));
1040 static void dwc3_ep0_do_control_status(struct dwc3 *dwc,
1041 const struct dwc3_event_depevt *event)
1043 struct dwc3_ep *dep = dwc->eps[event->endpoint_number];
1045 __dwc3_ep0_do_control_status(dwc, dep);
1048 static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
1050 struct dwc3_gadget_ep_cmd_params params;
1054 if (!dep->resource_index)
1057 cmd = DWC3_DEPCMD_ENDTRANSFER;
1058 cmd |= DWC3_DEPCMD_CMDIOC;
1059 cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
1060 memset(¶ms, 0, sizeof(params));
1061 ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms);
1063 dep->resource_index = 0;
1066 static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
1067 const struct dwc3_event_depevt *event)
1069 switch (event->status) {
1070 case DEPEVT_STATUS_CONTROL_DATA:
1071 dwc3_trace(trace_dwc3_ep0, "Control Data");
1074 * We already have a DATA transfer in the controller's cache,
1075 * if we receive a XferNotReady(DATA) we will ignore it, unless
1076 * it's for the wrong direction.
1078 * In that case, we must issue END_TRANSFER command to the Data
1079 * Phase we already have started and issue SetStall on the
1082 if (dwc->ep0_expect_in != event->endpoint_number) {
1083 struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in];
1085 dwc3_trace(trace_dwc3_ep0,
1086 "Wrong direction for Data phase");
1087 dwc3_ep0_end_control_data(dwc, dep);
1088 dwc3_ep0_stall_and_restart(dwc);
1094 case DEPEVT_STATUS_CONTROL_STATUS:
1095 if (dwc->ep0_next_event != DWC3_EP0_NRDY_STATUS)
1098 dwc3_trace(trace_dwc3_ep0, "Control Status");
1100 dwc->ep0state = EP0_STATUS_PHASE;
1102 if (dwc->delayed_status) {
1103 WARN_ON_ONCE(event->endpoint_number != 1);
1104 dwc3_trace(trace_dwc3_ep0, "Delayed Status");
1108 dwc3_ep0_do_control_status(dwc, event);
1112 void dwc3_ep0_interrupt(struct dwc3 *dwc,
1113 const struct dwc3_event_depevt *event)
1115 u8 epnum = event->endpoint_number;
1117 dwc3_trace(trace_dwc3_ep0, "%s while ep%d%s in state '%s'",
1118 dwc3_ep_event_string(event->endpoint_event),
1119 epnum >> 1, (epnum & 1) ? "in" : "out",
1120 dwc3_ep0_state_string(dwc->ep0state));
1122 switch (event->endpoint_event) {
1123 case DWC3_DEPEVT_XFERCOMPLETE:
1124 dwc3_ep0_xfer_complete(dwc, event);
1127 case DWC3_DEPEVT_XFERNOTREADY:
1128 dwc3_ep0_xfernotready(dwc, event);
1131 case DWC3_DEPEVT_XFERINPROGRESS:
1132 case DWC3_DEPEVT_RXTXFIFOEVT:
1133 case DWC3_DEPEVT_STREAMEVT:
1134 case DWC3_DEPEVT_EPCMDCMPLT: