drivers/usb/dwc3/gadget.c

   1 /**
   2  * gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
   3  *
   4  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
   5  *
   6  * Authors: Felipe Balbi <balbi@ti.com>,
   7  *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
   8  *
   9  * This program is free software: you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2  of
  11  * the License as published by the Free Software Foundation.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/delay.h>
  21 #include <linux/slab.h>
  22 #include <linux/spinlock.h>
  23 #include <linux/platform_device.h>
  24 #include <linux/pm_runtime.h>
  25 #include <linux/interrupt.h>
  26 #include <linux/io.h>
  27 #include <linux/list.h>
  28 #include <linux/dma-mapping.h>
  29
  30 #include <linux/usb/ch9.h>
  31 #include <linux/usb/gadget.h>
  32
  33 #include "debug.h"
  34 #include "core.h"
  35 #include "gadget.h"
  36 #include "io.h"
  37
  38 /**
  39  * dwc3_gadget_set_test_mode - Enables USB2 Test Modes
  40  * @dwc: pointer to our context structure
  41  * @mode: the mode to set (J, K SE0 NAK, Force Enable)
  42  *
  43  * Caller should take care of locking. This function will
  44  * return 0 on success or -EINVAL if wrong Test Selector
  45  * is passed
  46  */
  47 int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
  48 {
  49         u32             reg;
  50
  51         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
  52         reg &= ~DWC3_DCTL_TSTCTRL_MASK;
  53
  54         switch (mode) {
  55         case TEST_J:
  56         case TEST_K:
  57         case TEST_SE0_NAK:
  58         case TEST_PACKET:
  59         case TEST_FORCE_EN:
  60                 reg |= mode << 1;
  61                 break;
  62         default:
  63                 return -EINVAL;
  64         }
  65
  66         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
  67
  68         return 0;
  69 }
  70
  71 /**
  72  * dwc3_gadget_get_link_state - Gets current state of USB Link
  73  * @dwc: pointer to our context structure
  74  *
  75  * Caller should take care of locking. This function will
  76  * return the link state on success (>= 0) or -ETIMEDOUT.
  77  */
  78 int dwc3_gadget_get_link_state(struct dwc3 *dwc)
  79 {
  80         u32             reg;
  81
  82         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
  83
  84         return DWC3_DSTS_USBLNKST(reg);
  85 }
  86
  87 /**
  88  * dwc3_gadget_set_link_state - Sets USB Link to a particular State
  89  * @dwc: pointer to our context structure
  90  * @state: the state to put link into
  91  *
  92  * Caller should take care of locking. This function will
  93  * return 0 on success or -ETIMEDOUT.
  94  */
  95 int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
  96 {
  97         int             retries = 10000;
  98         u32             reg;
  99
 100         /*
 101          * Wait until device controller is ready. Only applies to 1.94a and
 102          * later RTL.
 103          */
 104         if (dwc->revision >= DWC3_REVISION_194A) {
 105                 while (--retries) {
 106                         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 107                         if (reg & DWC3_DSTS_DCNRD)
 108                                 udelay(5);
 109                         else
 110                                 break;
 111                 }
 112
 113                 if (retries <= 0)
 114                         return -ETIMEDOUT;
 115         }
 116
 117         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 118         reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
 119
 120         /* set requested state */
 121         reg |= DWC3_DCTL_ULSTCHNGREQ(state);
 122         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
 123
 124         /*
 125          * The following code is racy when called from dwc3_gadget_wakeup,
 126          * and is not needed, at least on newer versions
 127          */
 128         if (dwc->revision >= DWC3_REVISION_194A)
 129                 return 0;
 130
 131         /* wait for a change in DSTS */
 132         retries = 10000;
 133         while (--retries) {
 134                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 135
 136                 if (DWC3_DSTS_USBLNKST(reg) == state)
 137                         return 0;
 138
 139                 udelay(5);
 140         }
 141
 142         return -ETIMEDOUT;
 143 }
 144
 145 /**
 146  * dwc3_ep_inc_trb() - Increment a TRB index.
 147  * @index - Pointer to the TRB index to increment.
 148  *
 149  * The index should never point to the link TRB. After incrementing,
 150  * if it is point to the link TRB, wrap around to the beginning. The
 151  * link TRB is always at the last TRB entry.
 152  */
 153 static void dwc3_ep_inc_trb(u8 *index)
 154 {
 155         (*index)++;
 156         if (*index == (DWC3_TRB_NUM - 1))
 157                 *index = 0;
 158 }
 159
 160 static void dwc3_ep_inc_enq(struct dwc3_ep *dep)
 161 {
 162         dwc3_ep_inc_trb(&dep->trb_enqueue);
 163 }
 164
 165 static void dwc3_ep_inc_deq(struct dwc3_ep *dep)
 166 {
 167         dwc3_ep_inc_trb(&dep->trb_dequeue);
 168 }
 169
 170 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 171                 int status)
 172 {
 173         struct dwc3                     *dwc = dep->dwc;
 174
 175         req->started = false;
 176         list_del(&req->list);
 177         req->trb = NULL;
 178         req->remaining = 0;
 179
 180         if (req->request.status == -EINPROGRESS)
 181                 req->request.status = status;
 182
 183         if (dwc->ep0_bounced && dep->number <= 1)
 184                 dwc->ep0_bounced = false;
 185
 186         usb_gadget_unmap_request_by_dev(dwc->sysdev,
 187                         &req->request, req->direction);
 188
 189         trace_dwc3_gadget_giveback(req);
 190
 191         spin_unlock(&dwc->lock);
 192         usb_gadget_giveback_request(&dep->endpoint, &req->request);
 193         spin_lock(&dwc->lock);
 194
 195         if (dep->number > 1)
 196                 pm_runtime_put(dwc->dev);
 197 }
 198
 199 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
 200 {
 201         u32             timeout = 500;
 202         int             status = 0;
 203         int             ret = 0;
 204         u32             reg;
 205
 206         dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
 207         dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
 208
 209         do {
 210                 reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
 211                 if (!(reg & DWC3_DGCMD_CMDACT)) {
 212                         status = DWC3_DGCMD_STATUS(reg);
 213                         if (status)
 214                                 ret = -EINVAL;
 215                         break;
 216                 }
 217         } while (--timeout);
 218
 219         if (!timeout) {
 220                 ret = -ETIMEDOUT;
 221                 status = -ETIMEDOUT;
 222         }
 223
 224         trace_dwc3_gadget_generic_cmd(cmd, param, status);
 225
 226         return ret;
 227 }
 228
 229 static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
 230
 231 int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
 232                 struct dwc3_gadget_ep_cmd_params *params)
 233 {
 234         const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 235         struct dwc3             *dwc = dep->dwc;
 236         u32                     timeout = 500;
 237         u32                     reg;
 238
 239         int                     cmd_status = 0;
 240         int                     susphy = false;
 241         int                     ret = -EINVAL;
 242
 243         /*
 244          * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
 245          * we're issuing an endpoint command, we must check if
 246          * GUSB2PHYCFG.SUSPHY bit is set. If it is, then we need to clear it.
 247          *
 248          * We will also set SUSPHY bit to what it was before returning as stated
 249          * by the same section on Synopsys databook.
 250          */
 251         if (dwc->gadget.speed <= USB_SPEED_HIGH) {
 252                 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 253                 if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
 254                         susphy = true;
 255                         reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
 256                         dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 257                 }
 258         }
 259
 260         if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) {
 261                 int             needs_wakeup;
 262
 263                 needs_wakeup = (dwc->link_state == DWC3_LINK_STATE_U1 ||
 264                                 dwc->link_state == DWC3_LINK_STATE_U2 ||
 265                                 dwc->link_state == DWC3_LINK_STATE_U3);
 266
 267                 if (unlikely(needs_wakeup)) {
 268                         ret = __dwc3_gadget_wakeup(dwc);
 269                         dev_WARN_ONCE(dwc->dev, ret, "wakeup failed --> %d\n",
 270                                         ret);
 271                 }
 272         }
 273
 274         dwc3_writel(dep->regs, DWC3_DEPCMDPAR0, params->param0);
 275         dwc3_writel(dep->regs, DWC3_DEPCMDPAR1, params->param1);
 276         dwc3_writel(dep->regs, DWC3_DEPCMDPAR2, params->param2);
 277
 278         /*
 279          * Synopsys Databook 2.60a states in section 6.3.2.5.6 of that if we're
 280          * not relying on XferNotReady, we can make use of a special "No
 281          * Response Update Transfer" command where we should clear both CmdAct
 282          * and CmdIOC bits.
 283          *
 284          * With this, we don't need to wait for command completion and can
 285          * straight away issue further commands to the endpoint.
 286          *
 287          * NOTICE: We're making an assumption that control endpoints will never
 288          * make use of Update Transfer command. This is a safe assumption
 289          * because we can never have more than one request at a time with
 290          * Control Endpoints. If anybody changes that assumption, this chunk
 291          * needs to be updated accordingly.
 292          */
 293         if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_UPDATETRANSFER &&
 294                         !usb_endpoint_xfer_isoc(desc))
 295                 cmd &= ~(DWC3_DEPCMD_CMDIOC | DWC3_DEPCMD_CMDACT);
 296         else
 297                 cmd |= DWC3_DEPCMD_CMDACT;
 298
 299         dwc3_writel(dep->regs, DWC3_DEPCMD, cmd);
 300         do {
 301                 reg = dwc3_readl(dep->regs, DWC3_DEPCMD);
 302                 if (!(reg & DWC3_DEPCMD_CMDACT)) {
 303                         cmd_status = DWC3_DEPCMD_STATUS(reg);
 304
 305                         switch (cmd_status) {
 306                         case 0:
 307                                 ret = 0;
 308                                 break;
 309                         case DEPEVT_TRANSFER_NO_RESOURCE:
 310                                 ret = -EINVAL;
 311                                 break;
 312                         case DEPEVT_TRANSFER_BUS_EXPIRY:
 313                                 /*
 314                                  * SW issues START TRANSFER command to
 315                                  * isochronous ep with future frame interval. If
 316                                  * future interval time has already passed when
 317                                  * core receives the command, it will respond
 318                                  * with an error status of 'Bus Expiry'.
 319                                  *
 320                                  * Instead of always returning -EINVAL, let's
 321                                  * give a hint to the gadget driver that this is
 322                                  * the case by returning -EAGAIN.
 323                                  */
 324                                 ret = -EAGAIN;
 325                                 break;
 326                         default:
 327                                 dev_WARN(dwc->dev, "UNKNOWN cmd status\n");
 328                         }
 329
 330                         break;
 331                 }
 332         } while (--timeout);
 333
 334         if (timeout == 0) {
 335                 ret = -ETIMEDOUT;
 336                 cmd_status = -ETIMEDOUT;
 337         }
 338
 339         trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status);
 340
 341         if (ret == 0) {
 342                 switch (DWC3_DEPCMD_CMD(cmd)) {
 343                 case DWC3_DEPCMD_STARTTRANSFER:
 344                         dep->flags |= DWC3_EP_TRANSFER_STARTED;
 345                         break;
 346                 case DWC3_DEPCMD_ENDTRANSFER:
 347                         dep->flags &= ~DWC3_EP_TRANSFER_STARTED;
 348                         break;
 349                 default:
 350                         /* nothing */
 351                         break;
 352                 }
 353         }
 354
 355         if (unlikely(susphy)) {
 356                 reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 357                 reg |= DWC3_GUSB2PHYCFG_SUSPHY;
 358                 dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
 359         }
 360
 361         return ret;
 362 }
 363
 364 static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
 365 {
 366         struct dwc3 *dwc = dep->dwc;
 367         struct dwc3_gadget_ep_cmd_params params;
 368         u32 cmd = DWC3_DEPCMD_CLEARSTALL;
 369
 370         /*
 371          * As of core revision 2.60a the recommended programming model
 372          * is to set the ClearPendIN bit when issuing a Clear Stall EP
 373          * command for IN endpoints. This is to prevent an issue where
 374          * some (non-compliant) hosts may not send ACK TPs for pending
 375          * IN transfers due to a mishandled error condition. Synopsys
 376          * STAR 9000614252.
 377          */
 378         if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) &&
 379             (dwc->gadget.speed >= USB_SPEED_SUPER))
 380                 cmd |= DWC3_DEPCMD_CLEARPENDIN;
 381
 382         memset(&params, 0, sizeof(params));
 383
 384         return dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 385 }
 386
 387 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
 388                 struct dwc3_trb *trb)
 389 {
 390         u32             offset = (char *) trb - (char *) dep->trb_pool;
 391
 392         return dep->trb_pool_dma + offset;
 393 }
 394
 395 static int dwc3_alloc_trb_pool(struct dwc3_ep *dep)
 396 {
 397         struct dwc3             *dwc = dep->dwc;
 398
 399         if (dep->trb_pool)
 400                 return 0;
 401
 402         dep->trb_pool = dma_alloc_coherent(dwc->sysdev,
 403                         sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
 404                         &dep->trb_pool_dma, GFP_KERNEL);
 405         if (!dep->trb_pool) {
 406                 dev_err(dep->dwc->dev, "failed to allocate trb pool for %s\n",
 407                                 dep->name);
 408                 return -ENOMEM;
 409         }
 410
 411         return 0;
 412 }
 413
 414 static void dwc3_free_trb_pool(struct dwc3_ep *dep)
 415 {
 416         struct dwc3             *dwc = dep->dwc;
 417
 418         dma_free_coherent(dwc->sysdev, sizeof(struct dwc3_trb) * DWC3_TRB_NUM,
 419                         dep->trb_pool, dep->trb_pool_dma);
 420
 421         dep->trb_pool = NULL;
 422         dep->trb_pool_dma = 0;
 423 }
 424
 425 static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep);
 426
 427 /**
 428  * dwc3_gadget_start_config - Configure EP resources
 429  * @dwc: pointer to our controller context structure
 430  * @dep: endpoint that is being enabled
 431  *
 432  * The assignment of transfer resources cannot perfectly follow the
 433  * data book due to the fact that the controller driver does not have
 434  * all knowledge of the configuration in advance. It is given this
 435  * information piecemeal by the composite gadget framework after every
 436  * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
 437  * programming model in this scenario can cause errors. For two
 438  * reasons:
 439  *
 440  * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
 441  * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
 442  * multiple interfaces.
 443  *
 444  * 2) The databook does not mention doing more DEPXFERCFG for new
 445  * endpoint on alt setting (8.1.6).
 446  *
 447  * The following simplified method is used instead:
 448  *
 449  * All hardware endpoints can be assigned a transfer resource and this
 450  * setting will stay persistent until either a core reset or
 451  * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
 452  * do DEPXFERCFG for every hardware endpoint as well. We are
 453  * guaranteed that there are as many transfer resources as endpoints.
 454  *
 455  * This function is called for each endpoint when it is being enabled
 456  * but is triggered only when called for EP0-out, which always happens
 457  * first, and which should only happen in one of the above conditions.
 458  */
 459 static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
 460 {
 461         struct dwc3_gadget_ep_cmd_params params;
 462         u32                     cmd;
 463         int                     i;
 464         int                     ret;
 465
 466         if (dep->number)
 467                 return 0;
 468
 469         memset(&params, 0x00, sizeof(params));
 470         cmd = DWC3_DEPCMD_DEPSTARTCFG;
 471
 472         ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 473         if (ret)
 474                 return ret;
 475
 476         for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
 477                 struct dwc3_ep *dep = dwc->eps[i];
 478
 479                 if (!dep)
 480                         continue;
 481
 482                 ret = dwc3_gadget_set_xfer_resource(dwc, dep);
 483                 if (ret)
 484                         return ret;
 485         }
 486
 487         return 0;
 488 }
 489
 490 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 491                 bool modify, bool restore)
 492 {
 493         const struct usb_ss_ep_comp_descriptor *comp_desc;
 494         const struct usb_endpoint_descriptor *desc;
 495         struct dwc3_gadget_ep_cmd_params params;
 496
 497         if (dev_WARN_ONCE(dwc->dev, modify && restore,
 498                                         "Can't modify and restore\n"))
 499                 return -EINVAL;
 500
 501         comp_desc = dep->endpoint.comp_desc;
 502         desc = dep->endpoint.desc;
 503
 504         memset(&params, 0x00, sizeof(params));
 505
 506         params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
 507                 | DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc));
 508
 509         /* Burst size is only needed in SuperSpeed mode */
 510         if (dwc->gadget.speed >= USB_SPEED_SUPER) {
 511                 u32 burst = dep->endpoint.maxburst;
 512                 params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
 513         }
 514
 515         if (modify) {
 516                 params.param0 |= DWC3_DEPCFG_ACTION_MODIFY;
 517         } else if (restore) {
 518                 params.param0 |= DWC3_DEPCFG_ACTION_RESTORE;
 519                 params.param2 |= dep->saved_state;
 520         } else {
 521                 params.param0 |= DWC3_DEPCFG_ACTION_INIT;
 522         }
 523
 524         if (usb_endpoint_xfer_control(desc))
 525                 params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN;
 526
 527         if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc))
 528                 params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN;
 529
 530         if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
 531                 params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
 532                         | DWC3_DEPCFG_STREAM_EVENT_EN;
 533                 dep->stream_capable = true;
 534         }
 535
 536         if (!usb_endpoint_xfer_control(desc))
 537                 params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
 538
 539         /*
 540          * We are doing 1:1 mapping for endpoints, meaning
 541          * Physical Endpoints 2 maps to Logical Endpoint 2 and
 542          * so on. We consider the direction bit as part of the physical
 543          * endpoint number. So USB endpoint 0x81 is 0x03.
 544          */
 545         params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
 546
 547         /*
 548          * We must use the lower 16 TX FIFOs even though
 549          * HW might have more
 550          */
 551         if (dep->direction)
 552                 params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
 553
 554         if (desc->bInterval) {
 555                 params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
 556                 dep->interval = 1 << (desc->bInterval - 1);
 557         }
 558
 559         return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, &params);
 560 }
 561
 562 static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 563 {
 564         struct dwc3_gadget_ep_cmd_params params;
 565
 566         memset(&params, 0x00, sizeof(params));
 567
 568         params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 569
 570         return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
 571                         &params);
 572 }
 573
 574 /**
 575  * __dwc3_gadget_ep_enable - Initializes a HW endpoint
 576  * @dep: endpoint to be initialized
 577  * @desc: USB Endpoint Descriptor
 578  *
 579  * Caller should take care of locking
 580  */
 581 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 582                 bool modify, bool restore)
 583 {
 584         const struct usb_endpoint_descriptor *desc = dep->endpoint.desc;
 585         struct dwc3             *dwc = dep->dwc;
 586
 587         u32                     reg;
 588         int                     ret;
 589
 590         if (!(dep->flags & DWC3_EP_ENABLED)) {
 591                 ret = dwc3_gadget_start_config(dwc, dep);
 592                 if (ret)
 593                         return ret;
 594         }
 595
 596         ret = dwc3_gadget_set_ep_config(dwc, dep, modify, restore);
 597         if (ret)
 598                 return ret;
 599
 600         if (!(dep->flags & DWC3_EP_ENABLED)) {
 601                 struct dwc3_trb *trb_st_hw;
 602                 struct dwc3_trb *trb_link;
 603
 604                 dep->type = usb_endpoint_type(desc);
 605                 dep->flags |= DWC3_EP_ENABLED;
 606                 dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
 607
 608                 reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 609                 reg |= DWC3_DALEPENA_EP(dep->number);
 610                 dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 611
 612                 init_waitqueue_head(&dep->wait_end_transfer);
 613
 614                 if (usb_endpoint_xfer_control(desc))
 615                         goto out;
 616
 617                 /* Initialize the TRB ring */
 618                 dep->trb_dequeue = 0;
 619                 dep->trb_enqueue = 0;
 620                 memset(dep->trb_pool, 0,
 621                        sizeof(struct dwc3_trb) * DWC3_TRB_NUM);
 622
 623                 /* Link TRB. The HWO bit is never reset */
 624                 trb_st_hw = &dep->trb_pool[0];
 625
 626                 trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
 627                 trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 628                 trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 629                 trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
 630                 trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
 631         }
 632
 633         /*
 634          * Issue StartTransfer here with no-op TRB so we can always rely on No
 635          * Response Update Transfer command.
 636          */
 637         if (usb_endpoint_xfer_bulk(desc)) {
 638                 struct dwc3_gadget_ep_cmd_params params;
 639                 struct dwc3_trb *trb;
 640                 dma_addr_t trb_dma;
 641                 u32 cmd;
 642
 643                 memset(&params, 0, sizeof(params));
 644                 trb = &dep->trb_pool[0];
 645                 trb_dma = dwc3_trb_dma_offset(dep, trb);
 646
 647                 params.param0 = upper_32_bits(trb_dma);
 648                 params.param1 = lower_32_bits(trb_dma);
 649
 650                 cmd = DWC3_DEPCMD_STARTTRANSFER;
 651
 652                 ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 653                 if (ret < 0)
 654                         return ret;
 655
 656                 dep->flags |= DWC3_EP_BUSY;
 657
 658                 dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
 659                 WARN_ON_ONCE(!dep->resource_index);
 660         }
 661
 662
 663 out:
 664         trace_dwc3_gadget_ep_enable(dep);
 665
 666         return 0;
 667 }
 668
 669 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force);
 670 static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
 671 {
 672         struct dwc3_request             *req;
 673
 674         dwc3_stop_active_transfer(dwc, dep->number, true);
 675
 676         /* - giveback all requests to gadget driver */
 677         while (!list_empty(&dep->started_list)) {
 678                 req = next_request(&dep->started_list);
 679
 680                 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 681         }
 682
 683         while (!list_empty(&dep->pending_list)) {
 684                 req = next_request(&dep->pending_list);
 685
 686                 dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 687         }
 688 }
 689
 690 /**
 691  * __dwc3_gadget_ep_disable - Disables a HW endpoint
 692  * @dep: the endpoint to disable
 693  *
 694  * This function also removes requests which are currently processed ny the
 695  * hardware and those which are not yet scheduled.
 696  * Caller should take care of locking.
 697  */
 698 static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 699 {
 700         struct dwc3             *dwc = dep->dwc;
 701         u32                     reg;
 702
 703         trace_dwc3_gadget_ep_disable(dep);
 704
 705         dwc3_remove_requests(dwc, dep);
 706
 707         /* make sure HW endpoint isn't stalled */
 708         if (dep->flags & DWC3_EP_STALL)
 709                 __dwc3_gadget_ep_set_halt(dep, 0, false);
 710
 711         reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
 712         reg &= ~DWC3_DALEPENA_EP(dep->number);
 713         dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 714
 715         dep->stream_capable = false;
 716         dep->type = 0;
 717         dep->flags &= DWC3_EP_END_TRANSFER_PENDING;
 718
 719         /* Clear out the ep descriptors for non-ep0 */
 720         if (dep->number > 1) {
 721                 dep->endpoint.comp_desc = NULL;
 722                 dep->endpoint.desc = NULL;
 723         }
 724
 725         return 0;
 726 }
 727
 728 /* -------------------------------------------------------------------------- */
 729
 730 static int dwc3_gadget_ep0_enable(struct usb_ep *ep,
 731                 const struct usb_endpoint_descriptor *desc)
 732 {
 733         return -EINVAL;
 734 }
 735
 736 static int dwc3_gadget_ep0_disable(struct usb_ep *ep)
 737 {
 738         return -EINVAL;
 739 }
 740
 741 /* -------------------------------------------------------------------------- */
 742
 743 static int dwc3_gadget_ep_enable(struct usb_ep *ep,
 744                 const struct usb_endpoint_descriptor *desc)
 745 {
 746         struct dwc3_ep                  *dep;
 747         struct dwc3                     *dwc;
 748         unsigned long                   flags;
 749         int                             ret;
 750
 751         if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
 752                 pr_debug("dwc3: invalid parameters\n");
 753                 return -EINVAL;
 754         }
 755
 756         if (!desc->wMaxPacketSize) {
 757                 pr_debug("dwc3: missing wMaxPacketSize\n");
 758                 return -EINVAL;
 759         }
 760
 761         dep = to_dwc3_ep(ep);
 762         dwc = dep->dwc;
 763
 764         if (dev_WARN_ONCE(dwc->dev, dep->flags & DWC3_EP_ENABLED,
 765                                         "%s is already enabled\n",
 766                                         dep->name))
 767                 return 0;
 768
 769         spin_lock_irqsave(&dwc->lock, flags);
 770         ret = __dwc3_gadget_ep_enable(dep, false, false);
 771         spin_unlock_irqrestore(&dwc->lock, flags);
 772
 773         return ret;
 774 }
 775
 776 static int dwc3_gadget_ep_disable(struct usb_ep *ep)
 777 {
 778         struct dwc3_ep                  *dep;
 779         struct dwc3                     *dwc;
 780         unsigned long                   flags;
 781         int                             ret;
 782
 783         if (!ep) {
 784                 pr_debug("dwc3: invalid parameters\n");
 785                 return -EINVAL;
 786         }
 787
 788         dep = to_dwc3_ep(ep);
 789         dwc = dep->dwc;
 790
 791         if (dev_WARN_ONCE(dwc->dev, !(dep->flags & DWC3_EP_ENABLED),
 792                                         "%s is already disabled\n",
 793                                         dep->name))
 794                 return 0;
 795
 796         spin_lock_irqsave(&dwc->lock, flags);
 797         ret = __dwc3_gadget_ep_disable(dep);
 798         spin_unlock_irqrestore(&dwc->lock, flags);
 799
 800         return ret;
 801 }
 802
 803 static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
 804         gfp_t gfp_flags)
 805 {
 806         struct dwc3_request             *req;
 807         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
 808
 809         req = kzalloc(sizeof(*req), gfp_flags);
 810         if (!req)
 811                 return NULL;
 812
 813         req->epnum      = dep->number;
 814         req->dep        = dep;
 815
 816         dep->allocated_requests++;
 817
 818         trace_dwc3_alloc_request(req);
 819
 820         return &req->request;
 821 }
 822
 823 static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
 824                 struct usb_request *request)
 825 {
 826         struct dwc3_request             *req = to_dwc3_request(request);
 827         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
 828
 829         dep->allocated_requests--;
 830         trace_dwc3_free_request(req);
 831         kfree(req);
 832 }
 833
 834 static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep);
 835
 836 static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 837                 dma_addr_t dma, unsigned length, unsigned chain, unsigned node,
 838                 unsigned stream_id, unsigned short_not_ok, unsigned no_interrupt)
 839 {
 840         struct dwc3             *dwc = dep->dwc;
 841         struct usb_gadget       *gadget = &dwc->gadget;
 842         enum usb_device_speed   speed = gadget->speed;
 843
 844         dwc3_ep_inc_enq(dep);
 845
 846         trb->size = DWC3_TRB_SIZE_LENGTH(length);
 847         trb->bpl = lower_32_bits(dma);
 848         trb->bph = upper_32_bits(dma);
 849
 850         switch (usb_endpoint_type(dep->endpoint.desc)) {
 851         case USB_ENDPOINT_XFER_CONTROL:
 852                 trb->ctrl = DWC3_TRBCTL_CONTROL_SETUP;
 853                 break;
 854
 855         case USB_ENDPOINT_XFER_ISOC:
 856                 if (!node) {
 857                         trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST;
 858
 859                         if (speed == USB_SPEED_HIGH) {
 860                                 struct usb_ep *ep = &dep->endpoint;
 861                                 trb->size |= DWC3_TRB_SIZE_PCM1(ep->mult - 1);
 862                         }
 863                 } else {
 864                         trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS;
 865                 }
 866
 867                 /* always enable Interrupt on Missed ISOC */
 868                 trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 869                 break;
 870
 871         case USB_ENDPOINT_XFER_BULK:
 872         case USB_ENDPOINT_XFER_INT:
 873                 trb->ctrl = DWC3_TRBCTL_NORMAL;
 874                 break;
 875         default:
 876                 /*
 877                  * This is only possible with faulty memory because we
 878                  * checked it already :)
 879                  */
 880                 dev_WARN(dwc->dev, "Unknown endpoint type %d\n",
 881                                 usb_endpoint_type(dep->endpoint.desc));
 882         }
 883
 884         /* always enable Continue on Short Packet */
 885         if (usb_endpoint_dir_out(dep->endpoint.desc)) {
 886                 trb->ctrl |= DWC3_TRB_CTRL_CSP;
 887
 888                 if (short_not_ok)
 889                         trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI;
 890         }
 891
 892         if ((!no_interrupt && !chain) ||
 893                         (dwc3_calc_trbs_left(dep) == 0))
 894                 trb->ctrl |= DWC3_TRB_CTRL_IOC;
 895
 896         if (chain)
 897                 trb->ctrl |= DWC3_TRB_CTRL_CHN;
 898
 899         if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable)
 900                 trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id);
 901
 902         trb->ctrl |= DWC3_TRB_CTRL_HWO;
 903
 904         trace_dwc3_prepare_trb(dep, trb);
 905 }
 906
 907 /**
 908  * dwc3_prepare_one_trb - setup one TRB from one request
 909  * @dep: endpoint for which this request is prepared
 910  * @req: dwc3_request pointer
 911  * @chain: should this TRB be chained to the next?
 912  * @node: only for isochronous endpoints. First TRB needs different type.
 913  */
 914 static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 915                 struct dwc3_request *req, unsigned chain, unsigned node)
 916 {
 917         struct dwc3_trb         *trb;
 918         unsigned                length = req->request.length;
 919         unsigned                stream_id = req->request.stream_id;
 920         unsigned                short_not_ok = req->request.short_not_ok;
 921         unsigned                no_interrupt = req->request.no_interrupt;
 922         dma_addr_t              dma = req->request.dma;
 923
 924         trb = &dep->trb_pool[dep->trb_enqueue];
 925
 926         if (!req->trb) {
 927                 dwc3_gadget_move_started_request(req);
 928                 req->trb = trb;
 929                 req->trb_dma = dwc3_trb_dma_offset(dep, trb);
 930                 dep->queued_requests++;
 931         }
 932
 933         __dwc3_prepare_one_trb(dep, trb, dma, length, chain, node,
 934                         stream_id, short_not_ok, no_interrupt);
 935 }
 936
 937 /**
 938  * dwc3_ep_prev_trb() - Returns the previous TRB in the ring
 939  * @dep: The endpoint with the TRB ring
 940  * @index: The index of the current TRB in the ring
 941  *
 942  * Returns the TRB prior to the one pointed to by the index. If the
 943  * index is 0, we will wrap backwards, skip the link TRB, and return
 944  * the one just before that.
 945  */
 946 static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index)
 947 {
 948         u8 tmp = index;
 949
 950         if (!tmp)
 951                 tmp = DWC3_TRB_NUM - 1;
 952
 953         return &dep->trb_pool[tmp - 1];
 954 }
 955
 956 static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
 957 {
 958         struct dwc3_trb         *tmp;
 959         struct dwc3             *dwc = dep->dwc;
 960         u8                      trbs_left;
 961
 962         /*
 963          * If enqueue & dequeue are equal than it is either full or empty.
 964          *
 965          * One way to know for sure is if the TRB right before us has HWO bit
 966          * set or not. If it has, then we're definitely full and can't fit any
 967          * more transfers in our ring.
 968          */
 969         if (dep->trb_enqueue == dep->trb_dequeue) {
 970                 tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
 971                 if (dev_WARN_ONCE(dwc->dev, tmp->ctrl & DWC3_TRB_CTRL_HWO,
 972                                   "%s No TRBS left\n", dep->name))
 973                         return 0;
 974
 975                 return DWC3_TRB_NUM - 1;
 976         }
 977
 978         trbs_left = dep->trb_dequeue - dep->trb_enqueue;
 979         trbs_left &= (DWC3_TRB_NUM - 1);
 980
 981         if (dep->trb_dequeue < dep->trb_enqueue)
 982                 trbs_left--;
 983
 984         return trbs_left;
 985 }
 986
 987 static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
 988                 struct dwc3_request *req)
 989 {
 990         struct scatterlist *sg = req->sg;
 991         struct scatterlist *s;
 992         int             i;
 993
 994         for_each_sg(sg, s, req->num_pending_sgs, i) {
 995                 unsigned int length = req->request.length;
 996                 unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
 997                 unsigned int rem = length % maxp;
 998                 unsigned chain = true;
 999
1000                 if (sg_is_last(s))
1001                         chain = false;
1002
1003                 if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) {
1004                         struct dwc3     *dwc = dep->dwc;
1005                         struct dwc3_trb *trb;
1006
1007                         req->unaligned = true;
1008
1009                         /* prepare normal TRB */
1010                         dwc3_prepare_one_trb(dep, req, true, i);
1011
1012                         /* Now prepare one extra TRB to align transfer size */
1013                         trb = &dep->trb_pool[dep->trb_enqueue];
1014                         __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr,
1015                                         maxp - rem, false, 0,
1016                                         req->request.stream_id,
1017                                         req->request.short_not_ok,
1018                                         req->request.no_interrupt);
1019                 } else {
1020                         dwc3_prepare_one_trb(dep, req, chain, i);
1021                 }
1022
1023                 if (!dwc3_calc_trbs_left(dep))
1024                         break;
1025         }
1026 }
1027
1028 static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
1029                 struct dwc3_request *req)
1030 {
1031         unsigned int length = req->request.length;
1032         unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);
1033         unsigned int rem = length % maxp;
1034
1035         if (rem && usb_endpoint_dir_out(dep->endpoint.desc)) {
1036                 struct dwc3     *dwc = dep->dwc;
1037                 struct dwc3_trb *trb;
1038
1039                 req->unaligned = true;
1040
1041                 /* prepare normal TRB */
1042                 dwc3_prepare_one_trb(dep, req, true, 0);
1043
1044                 /* Now prepare one extra TRB to align transfer size */
1045                 trb = &dep->trb_pool[dep->trb_enqueue];
1046                 __dwc3_prepare_one_trb(dep, trb, dwc->bounce_addr, maxp - rem,
1047                                 false, 0, req->request.stream_id,
1048                                 req->request.short_not_ok,
1049                                 req->request.no_interrupt);
1050         } else {
1051                 dwc3_prepare_one_trb(dep, req, false, 0);
1052         }
1053 }
1054
1055 /*
1056  * dwc3_prepare_trbs - setup TRBs from requests
1057  * @dep: endpoint for which requests are being prepared
1058  *
1059  * The function goes through the requests list and sets up TRBs for the
1060  * transfers. The function returns once there are no more TRBs available or
1061  * it runs out of requests.
1062  */
1063 static void dwc3_prepare_trbs(struct dwc3_ep *dep)
1064 {
1065         struct dwc3_request     *req, *n;
1066
1067         BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
1068
1069         if (!dwc3_calc_trbs_left(dep))
1070                 return;
1071
1072         /*
1073          * We can get in a situation where there's a request in the started list
1074          * but there weren't enough TRBs to fully kick it in the first time
1075          * around, so it has been waiting for more TRBs to be freed up.
1076          *
1077          * In that case, we should check if we have a request with pending_sgs
1078          * in the started list and prepare TRBs for that request first,
1079          * otherwise we will prepare TRBs completely out of order and that will
1080          * break things.
1081          */
1082         list_for_each_entry(req, &dep->started_list, list) {
1083                 if (req->num_pending_sgs > 0)
1084                         dwc3_prepare_one_trb_sg(dep, req);
1085
1086                 if (!dwc3_calc_trbs_left(dep))
1087                         return;
1088         }
1089
1090         list_for_each_entry_safe(req, n, &dep->pending_list, list) {
1091                 if (req->num_pending_sgs > 0)
1092                         dwc3_prepare_one_trb_sg(dep, req);
1093                 else
1094                         dwc3_prepare_one_trb_linear(dep, req);
1095
1096                 if (!dwc3_calc_trbs_left(dep))
1097                         return;
1098         }
1099 }
1100
1101 static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param)
1102 {
1103         struct dwc3_gadget_ep_cmd_params params;
1104         struct dwc3_request             *req;
1105         int                             starting;
1106         int                             ret;
1107         u32                             cmd;
1108
1109         starting = !(dep->flags & DWC3_EP_BUSY);
1110
1111         dwc3_prepare_trbs(dep);
1112         req = next_request(&dep->started_list);
1113         if (!req) {
1114                 dep->flags |= DWC3_EP_PENDING_REQUEST;
1115                 return 0;
1116         }
1117
1118         memset(&params, 0, sizeof(params));
1119
1120         if (starting) {
1121                 params.param0 = upper_32_bits(req->trb_dma);
1122                 params.param1 = lower_32_bits(req->trb_dma);
1123                 cmd = DWC3_DEPCMD_STARTTRANSFER |
1124                         DWC3_DEPCMD_PARAM(cmd_param);
1125         } else {
1126                 cmd = DWC3_DEPCMD_UPDATETRANSFER |
1127                         DWC3_DEPCMD_PARAM(dep->resource_index);
1128         }
1129
1130         ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
1131         if (ret < 0) {
1132                 /*
1133                  * FIXME we need to iterate over the list of requests
1134                  * here and stop, unmap, free and del each of the linked
1135                  * requests instead of what we do now.
1136                  */
1137                 if (req->trb)
1138                         memset(req->trb, 0, sizeof(struct dwc3_trb));
1139                 dep->queued_requests--;
1140                 dwc3_gadget_giveback(dep, req, ret);
1141                 return ret;
1142         }
1143
1144         dep->flags |= DWC3_EP_BUSY;
1145
1146         if (starting) {
1147                 dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
1148                 WARN_ON_ONCE(!dep->resource_index);
1149         }
1150
1151         return 0;
1152 }
1153
1154 static int __dwc3_gadget_get_frame(struct dwc3 *dwc)
1155 {
1156         u32                     reg;
1157
1158         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1159         return DWC3_DSTS_SOFFN(reg);
1160 }
1161
1162 static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
1163                 struct dwc3_ep *dep, u32 cur_uf)
1164 {
1165         u32 uf;
1166
1167         if (list_empty(&dep->pending_list)) {
1168                 dev_info(dwc->dev, "%s: ran out of requests\n",
1169                                 dep->name);
1170                 dep->flags |= DWC3_EP_PENDING_REQUEST;
1171                 return;
1172         }
1173
1174         /* 4 micro frames in the future */
1175         uf = cur_uf + dep->interval * 4;
1176
1177         __dwc3_gadget_kick_transfer(dep, uf);
1178 }
1179
1180 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
1181                 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
1182 {
1183         u32 cur_uf, mask;
1184
1185         mask = ~(dep->interval - 1);
1186         cur_uf = event->parameters & mask;
1187
1188         __dwc3_gadget_start_isoc(dwc, dep, cur_uf);
1189 }
1190
1191 static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
1192 {
1193         struct dwc3             *dwc = dep->dwc;
1194         int                     ret;
1195
1196         if (!dep->endpoint.desc) {
1197                 dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n",
1198                                 dep->name);
1199                 return -ESHUTDOWN;
1200         }
1201
1202         if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
1203                                 &req->request, req->dep->name)) {
1204                 dev_err(dwc->dev, "%s: request %p belongs to '%s'\n",
1205                                 dep->name, &req->request, req->dep->name);
1206                 return -EINVAL;
1207         }
1208
1209         pm_runtime_get(dwc->dev);
1210
1211         req->request.actual     = 0;
1212         req->request.status     = -EINPROGRESS;
1213         req->direction          = dep->direction;
1214         req->epnum              = dep->number;
1215
1216         trace_dwc3_ep_queue(req);
1217
1218         ret = usb_gadget_map_request_by_dev(dwc->sysdev, &req->request,
1219                                             dep->direction);
1220         if (ret)
1221                 return ret;
1222
1223         req->sg                 = req->request.sg;
1224         req->num_pending_sgs    = req->request.num_mapped_sgs;
1225
1226         list_add_tail(&req->list, &dep->pending_list);
1227
1228         /*
1229          * NOTICE: Isochronous endpoints should NEVER be prestarted. We must
1230          * wait for a XferNotReady event so we will know what's the current
1231          * (micro-)frame number.
1232          *
1233          * Without this trick, we are very, very likely gonna get Bus Expiry
1234          * errors which will force us issue EndTransfer command.
1235          */
1236         if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1237                 if ((dep->flags & DWC3_EP_PENDING_REQUEST)) {
1238                         if (dep->flags & DWC3_EP_TRANSFER_STARTED) {
1239                                 dwc3_stop_active_transfer(dwc, dep->number, true);
1240                                 dep->flags = DWC3_EP_ENABLED;
1241                         } else {
1242                                 u32 cur_uf;
1243
1244                                 cur_uf = __dwc3_gadget_get_frame(dwc);
1245                                 __dwc3_gadget_start_isoc(dwc, dep, cur_uf);
1246                                 dep->flags &= ~DWC3_EP_PENDING_REQUEST;
1247                         }
1248                 }
1249                 return 0;
1250         }
1251
1252         if (!dwc3_calc_trbs_left(dep))
1253                 return 0;
1254
1255         ret = __dwc3_gadget_kick_transfer(dep, 0);
1256         if (ret == -EBUSY)
1257                 ret = 0;
1258
1259         return ret;
1260 }
1261
1262 static void __dwc3_gadget_ep_zlp_complete(struct usb_ep *ep,
1263                 struct usb_request *request)
1264 {
1265         dwc3_gadget_ep_free_request(ep, request);
1266 }
1267
1268 static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep)
1269 {
1270         struct dwc3_request             *req;
1271         struct usb_request              *request;
1272         struct usb_ep                   *ep = &dep->endpoint;
1273
1274         request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
1275         if (!request)
1276                 return -ENOMEM;
1277
1278         request->length = 0;
1279         request->buf = dwc->zlp_buf;
1280         request->complete = __dwc3_gadget_ep_zlp_complete;
1281
1282         req = to_dwc3_request(request);
1283
1284         return __dwc3_gadget_ep_queue(dep, req);
1285 }
1286
1287 static int dwc3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
1288         gfp_t gfp_flags)
1289 {
1290         struct dwc3_request             *req = to_dwc3_request(request);
1291         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1292         struct dwc3                     *dwc = dep->dwc;
1293
1294         unsigned long                   flags;
1295
1296         int                             ret;
1297
1298         spin_lock_irqsave(&dwc->lock, flags);
1299         ret = __dwc3_gadget_ep_queue(dep, req);
1300
1301         /*
1302          * Okay, here's the thing, if gadget driver has requested for a ZLP by
1303          * setting request->zero, instead of doing magic, we will just queue an
1304          * extra usb_request ourselves so that it gets handled the same way as
1305          * any other request.
1306          */
1307         if (ret == 0 && request->zero && request->length &&
1308             (request->length % ep->maxpacket == 0))
1309                 ret = __dwc3_gadget_ep_queue_zlp(dwc, dep);
1310
1311         spin_unlock_irqrestore(&dwc->lock, flags);
1312
1313         return ret;
1314 }
1315
1316 static int dwc3_gadget_ep_dequeue(struct usb_ep *ep,
1317                 struct usb_request *request)
1318 {
1319         struct dwc3_request             *req = to_dwc3_request(request);
1320         struct dwc3_request             *r = NULL;
1321
1322         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1323         struct dwc3                     *dwc = dep->dwc;
1324
1325         unsigned long                   flags;
1326         int                             ret = 0;
1327
1328         trace_dwc3_ep_dequeue(req);
1329
1330         spin_lock_irqsave(&dwc->lock, flags);
1331
1332         list_for_each_entry(r, &dep->pending_list, list) {
1333                 if (r == req)
1334                         break;
1335         }
1336
1337         if (r != req) {
1338                 list_for_each_entry(r, &dep->started_list, list) {
1339                         if (r == req)
1340                                 break;
1341                 }
1342                 if (r == req) {
1343                         /* wait until it is processed */
1344                         dwc3_stop_active_transfer(dwc, dep->number, true);
1345                         goto out1;
1346                 }
1347                 dev_err(dwc->dev, "request %p was not queued to %s\n",
1348                                 request, ep->name);
1349                 ret = -EINVAL;
1350                 goto out0;
1351         }
1352
1353 out1:
1354         /* giveback the request */
1355         dwc3_gadget_giveback(dep, req, -ECONNRESET);
1356
1357 out0:
1358         spin_unlock_irqrestore(&dwc->lock, flags);
1359
1360         return ret;
1361 }
1362
1363 int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
1364 {
1365         struct dwc3_gadget_ep_cmd_params        params;
1366         struct dwc3                             *dwc = dep->dwc;
1367         int                                     ret;
1368
1369         if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
1370                 dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
1371                 return -EINVAL;
1372         }
1373
1374         memset(&params, 0x00, sizeof(params));
1375
1376         if (value) {
1377                 struct dwc3_trb *trb;
1378
1379                 unsigned transfer_in_flight;
1380                 unsigned started;
1381
1382                 if (dep->flags & DWC3_EP_STALL)
1383                         return 0;
1384
1385                 if (dep->number > 1)
1386                         trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
1387                 else
1388                         trb = &dwc->ep0_trb[dep->trb_enqueue];
1389
1390                 transfer_in_flight = trb->ctrl & DWC3_TRB_CTRL_HWO;
1391                 started = !list_empty(&dep->started_list);
1392
1393                 if (!protocol && ((dep->direction && transfer_in_flight) ||
1394                                 (!dep->direction && started))) {
1395                         return -EAGAIN;
1396                 }
1397
1398                 ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETSTALL,
1399                                 &params);
1400                 if (ret)
1401                         dev_err(dwc->dev, "failed to set STALL on %s\n",
1402                                         dep->name);
1403                 else
1404                         dep->flags |= DWC3_EP_STALL;
1405         } else {
1406                 if (!(dep->flags & DWC3_EP_STALL))
1407                         return 0;
1408
1409                 ret = dwc3_send_clear_stall_ep_cmd(dep);
1410                 if (ret)
1411                         dev_err(dwc->dev, "failed to clear STALL on %s\n",
1412                                         dep->name);
1413                 else
1414                         dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE);
1415         }
1416
1417         return ret;
1418 }
1419
1420 static int dwc3_gadget_ep_set_halt(struct usb_ep *ep, int value)
1421 {
1422         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1423         struct dwc3                     *dwc = dep->dwc;
1424
1425         unsigned long                   flags;
1426
1427         int                             ret;
1428
1429         spin_lock_irqsave(&dwc->lock, flags);
1430         ret = __dwc3_gadget_ep_set_halt(dep, value, false);
1431         spin_unlock_irqrestore(&dwc->lock, flags);
1432
1433         return ret;
1434 }
1435
1436 static int dwc3_gadget_ep_set_wedge(struct usb_ep *ep)
1437 {
1438         struct dwc3_ep                  *dep = to_dwc3_ep(ep);
1439         struct dwc3                     *dwc = dep->dwc;
1440         unsigned long                   flags;
1441         int                             ret;
1442
1443         spin_lock_irqsave(&dwc->lock, flags);
1444         dep->flags |= DWC3_EP_WEDGE;
1445
1446         if (dep->number == 0 || dep->number == 1)
1447                 ret = __dwc3_gadget_ep0_set_halt(ep, 1);
1448         else
1449                 ret = __dwc3_gadget_ep_set_halt(dep, 1, false);
1450         spin_unlock_irqrestore(&dwc->lock, flags);
1451
1452         return ret;
1453 }
1454
1455 /* -------------------------------------------------------------------------- */
1456
1457 static struct usb_endpoint_descriptor dwc3_gadget_ep0_desc = {
1458         .bLength        = USB_DT_ENDPOINT_SIZE,
1459         .bDescriptorType = USB_DT_ENDPOINT,
1460         .bmAttributes   = USB_ENDPOINT_XFER_CONTROL,
1461 };
1462
1463 static const struct usb_ep_ops dwc3_gadget_ep0_ops = {
1464         .enable         = dwc3_gadget_ep0_enable,
1465         .disable        = dwc3_gadget_ep0_disable,
1466         .alloc_request  = dwc3_gadget_ep_alloc_request,
1467         .free_request   = dwc3_gadget_ep_free_request,
1468         .queue          = dwc3_gadget_ep0_queue,
1469         .dequeue        = dwc3_gadget_ep_dequeue,
1470         .set_halt       = dwc3_gadget_ep0_set_halt,
1471         .set_wedge      = dwc3_gadget_ep_set_wedge,
1472 };
1473
1474 static const struct usb_ep_ops dwc3_gadget_ep_ops = {
1475         .enable         = dwc3_gadget_ep_enable,
1476         .disable        = dwc3_gadget_ep_disable,
1477         .alloc_request  = dwc3_gadget_ep_alloc_request,
1478         .free_request   = dwc3_gadget_ep_free_request,
1479         .queue          = dwc3_gadget_ep_queue,
1480         .dequeue        = dwc3_gadget_ep_dequeue,
1481         .set_halt       = dwc3_gadget_ep_set_halt,
1482         .set_wedge      = dwc3_gadget_ep_set_wedge,
1483 };
1484
1485 /* -------------------------------------------------------------------------- */
1486
1487 static int dwc3_gadget_get_frame(struct usb_gadget *g)
1488 {
1489         struct dwc3             *dwc = gadget_to_dwc(g);
1490
1491         return __dwc3_gadget_get_frame(dwc);
1492 }
1493
1494 static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
1495 {
1496         int                     retries;
1497
1498         int                     ret;
1499         u32                     reg;
1500
1501         u8                      link_state;
1502         u8                      speed;
1503
1504         /*
1505          * According to the Databook Remote wakeup request should
1506          * be issued only when the device is in early suspend state.
1507          *
1508          * We can check that via USB Link State bits in DSTS register.
1509          */
1510         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1511
1512         speed = reg & DWC3_DSTS_CONNECTSPD;
1513         if ((speed == DWC3_DSTS_SUPERSPEED) ||
1514             (speed == DWC3_DSTS_SUPERSPEED_PLUS))
1515                 return 0;
1516
1517         link_state = DWC3_DSTS_USBLNKST(reg);
1518
1519         switch (link_state) {
1520         case DWC3_LINK_STATE_RX_DET:    /* in HS, means Early Suspend */
1521         case DWC3_LINK_STATE_U3:        /* in HS, means SUSPEND */
1522                 break;
1523         default:
1524                 return -EINVAL;
1525         }
1526
1527         ret = dwc3_gadget_set_link_state(dwc, DWC3_LINK_STATE_RECOV);
1528         if (ret < 0) {
1529                 dev_err(dwc->dev, "failed to put link in Recovery\n");
1530                 return ret;
1531         }
1532
1533         /* Recent versions do this automatically */
1534         if (dwc->revision < DWC3_REVISION_194A) {
1535                 /* write zeroes to Link Change Request */
1536                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1537                 reg &= ~DWC3_DCTL_ULSTCHNGREQ_MASK;
1538                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1539         }
1540
1541         /* poll until Link State changes to ON */
1542         retries = 20000;
1543
1544         while (retries--) {
1545                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1546
1547                 /* in HS, means ON */
1548                 if (DWC3_DSTS_USBLNKST(reg) == DWC3_LINK_STATE_U0)
1549                         break;
1550         }
1551
1552         if (DWC3_DSTS_USBLNKST(reg) != DWC3_LINK_STATE_U0) {
1553                 dev_err(dwc->dev, "failed to send remote wakeup\n");
1554                 return -EINVAL;
1555         }
1556
1557         return 0;
1558 }
1559
1560 static int dwc3_gadget_wakeup(struct usb_gadget *g)
1561 {
1562         struct dwc3             *dwc = gadget_to_dwc(g);
1563         unsigned long           flags;
1564         int                     ret;
1565
1566         spin_lock_irqsave(&dwc->lock, flags);
1567         ret = __dwc3_gadget_wakeup(dwc);
1568         spin_unlock_irqrestore(&dwc->lock, flags);
1569
1570         return ret;
1571 }
1572
1573 static int dwc3_gadget_set_selfpowered(struct usb_gadget *g,
1574                 int is_selfpowered)
1575 {
1576         struct dwc3             *dwc = gadget_to_dwc(g);
1577         unsigned long           flags;
1578
1579         spin_lock_irqsave(&dwc->lock, flags);
1580         g->is_selfpowered = !!is_selfpowered;
1581         spin_unlock_irqrestore(&dwc->lock, flags);
1582
1583         return 0;
1584 }
1585
1586 static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
1587 {
1588         u32                     reg;
1589         u32                     timeout = 500;
1590
1591         if (pm_runtime_suspended(dwc->dev))
1592                 return 0;
1593
1594         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
1595         if (is_on) {
1596                 if (dwc->revision <= DWC3_REVISION_187A) {
1597                         reg &= ~DWC3_DCTL_TRGTULST_MASK;
1598                         reg |= DWC3_DCTL_TRGTULST_RX_DET;
1599                 }
1600
1601                 if (dwc->revision >= DWC3_REVISION_194A)
1602                         reg &= ~DWC3_DCTL_KEEP_CONNECT;
1603                 reg |= DWC3_DCTL_RUN_STOP;
1604
1605                 if (dwc->has_hibernation)
1606                         reg |= DWC3_DCTL_KEEP_CONNECT;
1607
1608                 dwc->pullups_connected = true;
1609         } else {
1610                 reg &= ~DWC3_DCTL_RUN_STOP;
1611
1612                 if (dwc->has_hibernation && !suspend)
1613                         reg &= ~DWC3_DCTL_KEEP_CONNECT;
1614
1615                 dwc->pullups_connected = false;
1616         }
1617
1618         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
1619
1620         do {
1621                 reg = dwc3_readl(dwc->regs, DWC3_DSTS);
1622                 reg &= DWC3_DSTS_DEVCTRLHLT;
1623         } while (--timeout && !(!is_on ^ !reg));
1624
1625         if (!timeout)
1626                 return -ETIMEDOUT;
1627
1628         return 0;
1629 }
1630
1631 static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on)
1632 {
1633         struct dwc3             *dwc = gadget_to_dwc(g);
1634         unsigned long           flags;
1635         int                     ret;
1636
1637         is_on = !!is_on;
1638
1639         /*
1640          * Per databook, when we want to stop the gadget, if a control transfer
1641          * is still in process, complete it and get the core into setup phase.
1642          */
1643         if (!is_on && dwc->ep0state != EP0_SETUP_PHASE) {
1644                 reinit_completion(&dwc->ep0_in_setup);
1645
1646                 ret = wait_for_completion_timeout(&dwc->ep0_in_setup,
1647                                 msecs_to_jiffies(DWC3_PULL_UP_TIMEOUT));
1648                 if (ret == 0) {
1649                         dev_err(dwc->dev, "timed out waiting for SETUP phase\n");
1650                         return -ETIMEDOUT;
1651                 }
1652         }
1653
1654         spin_lock_irqsave(&dwc->lock, flags);
1655         ret = dwc3_gadget_run_stop(dwc, is_on, false);
1656         spin_unlock_irqrestore(&dwc->lock, flags);
1657
1658         return ret;
1659 }
1660
1661 static void dwc3_gadget_enable_irq(struct dwc3 *dwc)
1662 {
1663         u32                     reg;
1664
1665         /* Enable all but Start and End of Frame IRQs */
1666         reg = (DWC3_DEVTEN_VNDRDEVTSTRCVEDEN |
1667                         DWC3_DEVTEN_EVNTOVERFLOWEN |
1668                         DWC3_DEVTEN_CMDCMPLTEN |
1669                         DWC3_DEVTEN_ERRTICERREN |
1670                         DWC3_DEVTEN_WKUPEVTEN |
1671                         DWC3_DEVTEN_CONNECTDONEEN |
1672                         DWC3_DEVTEN_USBRSTEN |
1673                         DWC3_DEVTEN_DISCONNEVTEN);
1674
1675         if (dwc->revision < DWC3_REVISION_250A)
1676                 reg |= DWC3_DEVTEN_ULSTCNGEN;
1677
1678         dwc3_writel(dwc->regs, DWC3_DEVTEN, reg);
1679 }
1680
1681 static void dwc3_gadget_disable_irq(struct dwc3 *dwc)
1682 {
1683         /* mask all interrupts */
1684         dwc3_writel(dwc->regs, DWC3_DEVTEN, 0x00);
1685 }
1686
1687 static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
1688 static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);
1689
1690 /**
1691  * dwc3_gadget_setup_nump - Calculate and initialize NUMP field of DCFG
1692  * dwc: pointer to our context structure
1693  *
1694  * The following looks like complex but it's actually very simple. In order to
1695  * calculate the number of packets we can burst at once on OUT transfers, we're
1696  * gonna use RxFIFO size.
1697  *
1698  * To calculate RxFIFO size we need two numbers:
1699  * MDWIDTH = size, in bits, of the internal memory bus
1700  * RAM2_DEPTH = depth, in MDWIDTH, of internal RAM2 (where RxFIFO sits)
1701  *
1702  * Given these two numbers, the formula is simple:
1703  *
1704  * RxFIFO Size = (RAM2_DEPTH * MDWIDTH / 8) - 24 - 16;
1705  *
1706  * 24 bytes is for 3x SETUP packets
1707  * 16 bytes is a clock domain crossing tolerance
1708  *
1709  * Given RxFIFO Size, NUMP = RxFIFOSize / 1024;
1710  */
1711 static void dwc3_gadget_setup_nump(struct dwc3 *dwc)
1712 {
1713         u32 ram2_depth;
1714         u32 mdwidth;
1715         u32 nump;
1716         u32 reg;
1717
1718         ram2_depth = DWC3_GHWPARAMS7_RAM2_DEPTH(dwc->hwparams.hwparams7);
1719         mdwidth = DWC3_GHWPARAMS0_MDWIDTH(dwc->hwparams.hwparams0);
1720
1721         nump = ((ram2_depth * mdwidth / 8) - 24 - 16) / 1024;
1722         nump = min_t(u32, nump, 16);
1723
1724         /* update NumP */
1725         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
1726         reg &= ~DWC3_DCFG_NUMP_MASK;
1727         reg |= nump << DWC3_DCFG_NUMP_SHIFT;
1728         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
1729 }
1730
1731 static int __dwc3_gadget_start(struct dwc3 *dwc)
1732 {
1733         struct dwc3_ep          *dep;
1734         int                     ret = 0;
1735         u32                     reg;
1736
1737         /*
1738          * Use IMOD if enabled via dwc->imod_interval. Otherwise, if
1739          * the core supports IMOD, disable it.
1740          */
1741         if (dwc->imod_interval) {
1742                 dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
1743                 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB);
1744         } else if (dwc3_has_imod(dwc)) {
1745                 dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), 0);
1746         }
1747
1748         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
1749         reg &= ~(DWC3_DCFG_SPEED_MASK);
1750
1751         /**
1752          * WORKAROUND: DWC3 revision < 2.20a have an issue
1753          * which would cause metastability state on Run/Stop
1754          * bit if we try to force the IP to USB2-only mode.
1755          *
1756          * Because of that, we cannot configure the IP to any
1757          * speed other than the SuperSpeed
1758          *
1759          * Refers to:
1760          *
1761          * STAR#9000525659: Clock Domain Crossing on DCTL in
1762          * USB 2.0 Mode
1763          */
1764         if (dwc->revision < DWC3_REVISION_220A) {
1765                 reg |= DWC3_DCFG_SUPERSPEED;
1766         } else {
1767                 switch (dwc->maximum_speed) {
1768                 case USB_SPEED_LOW:
1769                         reg |= DWC3_DCFG_LOWSPEED;
1770                         break;
1771                 case USB_SPEED_FULL:
1772                         reg |= DWC3_DCFG_FULLSPEED;
1773                         break;
1774                 case USB_SPEED_HIGH:
1775                         reg |= DWC3_DCFG_HIGHSPEED;
1776                         break;
1777                 case USB_SPEED_SUPER_PLUS:
1778                         reg |= DWC3_DCFG_SUPERSPEED_PLUS;
1779                         break;
1780                 default:
1781                         dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
1782                                 dwc->maximum_speed);
1783                         /* fall through */
1784                 case USB_SPEED_SUPER:
1785                         reg |= DWC3_DCFG_SUPERSPEED;
1786                         break;
1787                 }
1788         }
1789         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
1790
1791         /*
1792          * We are telling dwc3 that we want to use DCFG.NUMP as ACK TP's NUMP
1793          * field instead of letting dwc3 itself calculate that automatically.
1794          *
1795          * This way, we maximize the chances that we'll be able to get several
1796          * bursts of data without going through any sort of endpoint throttling.
1797          */
1798         reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
1799         reg &= ~DWC3_GRXTHRCFG_PKTCNTSEL;
1800         dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
1801
1802         dwc3_gadget_setup_nump(dwc);
1803
1804         /* Start with SuperSpeed Default */
1805         dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
1806
1807         dep = dwc->eps[0];
1808         ret = __dwc3_gadget_ep_enable(dep, false, false);
1809         if (ret) {
1810                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1811                 goto err0;
1812         }
1813
1814         dep = dwc->eps[1];
1815         ret = __dwc3_gadget_ep_enable(dep, false, false);
1816         if (ret) {
1817                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
1818                 goto err1;
1819         }
1820
1821         /* begin to receive SETUP packets */
1822         dwc->ep0state = EP0_SETUP_PHASE;
1823         dwc3_ep0_out_start(dwc);
1824
1825         dwc3_gadget_enable_irq(dwc);
1826
1827         return 0;
1828
1829 err1:
1830         __dwc3_gadget_ep_disable(dwc->eps[0]);
1831
1832 err0:
1833         return ret;
1834 }
1835
1836 static int dwc3_gadget_start(struct usb_gadget *g,
1837                 struct usb_gadget_driver *driver)
1838 {
1839         struct dwc3             *dwc = gadget_to_dwc(g);
1840         unsigned long           flags;
1841         int                     ret = 0;
1842         int                     irq;
1843
1844         irq = dwc->irq_gadget;
1845         ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
1846                         IRQF_SHARED, "dwc3", dwc->ev_buf);
1847         if (ret) {
1848                 dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
1849                                 irq, ret);
1850                 goto err0;
1851         }
1852
1853         spin_lock_irqsave(&dwc->lock, flags);
1854         if (dwc->gadget_driver) {
1855                 dev_err(dwc->dev, "%s is already bound to %s\n",
1856                                 dwc->gadget.name,
1857                                 dwc->gadget_driver->driver.name);
1858                 ret = -EBUSY;
1859                 goto err1;
1860         }
1861
1862         dwc->gadget_driver      = driver;
1863
1864         if (pm_runtime_active(dwc->dev))
1865                 __dwc3_gadget_start(dwc);
1866
1867         spin_unlock_irqrestore(&dwc->lock, flags);
1868
1869         return 0;
1870
1871 err1:
1872         spin_unlock_irqrestore(&dwc->lock, flags);
1873         free_irq(irq, dwc);
1874
1875 err0:
1876         return ret;
1877 }
1878
1879 static void __dwc3_gadget_stop(struct dwc3 *dwc)
1880 {
1881         dwc3_gadget_disable_irq(dwc);
1882         __dwc3_gadget_ep_disable(dwc->eps[0]);
1883         __dwc3_gadget_ep_disable(dwc->eps[1]);
1884 }
1885
1886 static int dwc3_gadget_stop(struct usb_gadget *g)
1887 {
1888         struct dwc3             *dwc = gadget_to_dwc(g);
1889         unsigned long           flags;
1890         int                     epnum;
1891
1892         spin_lock_irqsave(&dwc->lock, flags);
1893
1894         if (pm_runtime_suspended(dwc->dev))
1895                 goto out;
1896
1897         __dwc3_gadget_stop(dwc);
1898
1899         for (epnum = 2; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
1900                 struct dwc3_ep  *dep = dwc->eps[epnum];
1901
1902                 if (!dep)
1903                         continue;
1904
1905                 if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
1906                         continue;
1907
1908                 wait_event_lock_irq(dep->wait_end_transfer,
1909                                     !(dep->flags & DWC3_EP_END_TRANSFER_PENDING),
1910                                     dwc->lock);
1911         }
1912
1913 out:
1914         dwc->gadget_driver      = NULL;
1915         spin_unlock_irqrestore(&dwc->lock, flags);
1916
1917         free_irq(dwc->irq_gadget, dwc->ev_buf);
1918
1919         return 0;
1920 }
1921
1922 static const struct usb_gadget_ops dwc3_gadget_ops = {
1923         .get_frame              = dwc3_gadget_get_frame,
1924         .wakeup                 = dwc3_gadget_wakeup,
1925         .set_selfpowered        = dwc3_gadget_set_selfpowered,
1926         .pullup                 = dwc3_gadget_pullup,
1927         .udc_start              = dwc3_gadget_start,
1928         .udc_stop               = dwc3_gadget_stop,
1929 };
1930
1931 /* -------------------------------------------------------------------------- */
1932
1933 static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
1934                 u8 num, u32 direction)
1935 {
1936         struct dwc3_ep                  *dep;
1937         u8                              i;
1938
1939         for (i = 0; i < num; i++) {
1940                 u8 epnum = (i << 1) | (direction ? 1 : 0);
1941
1942                 dep = kzalloc(sizeof(*dep), GFP_KERNEL);
1943                 if (!dep)
1944                         return -ENOMEM;
1945
1946                 dep->dwc = dwc;
1947                 dep->number = epnum;
1948                 dep->direction = !!direction;
1949                 dep->regs = dwc->regs + DWC3_DEP_BASE(epnum);
1950                 dwc->eps[epnum] = dep;
1951
1952                 snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
1953                                 (epnum & 1) ? "in" : "out");
1954
1955                 dep->endpoint.name = dep->name;
1956
1957                 if (!(dep->number > 1)) {
1958                         dep->endpoint.desc = &dwc3_gadget_ep0_desc;
1959                         dep->endpoint.comp_desc = NULL;
1960                 }
1961
1962                 spin_lock_init(&dep->lock);
1963
1964                 if (epnum == 0 || epnum == 1) {
1965                         usb_ep_set_maxpacket_limit(&dep->endpoint, 512);
1966                         dep->endpoint.maxburst = 1;
1967                         dep->endpoint.ops = &dwc3_gadget_ep0_ops;
1968                         if (!epnum)
1969                                 dwc->gadget.ep0 = &dep->endpoint;
1970                 } else if (direction) {
1971                         int mdwidth;
1972                         int size;
1973                         int ret;
1974                         int num;
1975
1976                         mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
1977                         /* MDWIDTH is represented in bits, we need it in bytes */
1978                         mdwidth /= 8;
1979
1980                         size = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(i));
1981                         size = DWC3_GTXFIFOSIZ_TXFDEF(size);
1982
1983                         /* FIFO Depth is in MDWDITH bytes. Multiply */
1984                         size *= mdwidth;
1985
1986                         num = size / 1024;
1987                         if (num == 0)
1988                                 num = 1;
1989
1990                         /*
1991                          * FIFO sizes account an extra MDWIDTH * (num + 1) bytes for
1992                          * internal overhead. We don't really know how these are used,
1993                          * but documentation say it exists.
1994                          */
1995                         size -= mdwidth * (num + 1);
1996                         size /= num;
1997
1998                         usb_ep_set_maxpacket_limit(&dep->endpoint, size);
1999
2000                         dep->endpoint.max_streams = 15;
2001                         dep->endpoint.ops = &dwc3_gadget_ep_ops;
2002                         list_add_tail(&dep->endpoint.ep_list,
2003                                         &dwc->gadget.ep_list);
2004
2005                         ret = dwc3_alloc_trb_pool(dep);
2006                         if (ret)
2007                                 return ret;
2008                 } else {
2009                         int             ret;
2010
2011                         usb_ep_set_maxpacket_limit(&dep->endpoint, 1024);
2012                         dep->endpoint.max_streams = 15;
2013                         dep->endpoint.ops = &dwc3_gadget_ep_ops;
2014                         list_add_tail(&dep->endpoint.ep_list,
2015                                         &dwc->gadget.ep_list);
2016
2017                         ret = dwc3_alloc_trb_pool(dep);
2018                         if (ret)
2019                                 return ret;
2020                 }
2021
2022                 if (epnum == 0 || epnum == 1) {
2023                         dep->endpoint.caps.type_control = true;
2024                 } else {
2025                         dep->endpoint.caps.type_iso = true;
2026                         dep->endpoint.caps.type_bulk = true;
2027                         dep->endpoint.caps.type_int = true;
2028                 }
2029
2030                 dep->endpoint.caps.dir_in = !!direction;
2031                 dep->endpoint.caps.dir_out = !direction;
2032
2033                 INIT_LIST_HEAD(&dep->pending_list);
2034                 INIT_LIST_HEAD(&dep->started_list);
2035         }
2036
2037         return 0;
2038 }
2039
2040 static int dwc3_gadget_init_endpoints(struct dwc3 *dwc)
2041 {
2042         int                             ret;
2043
2044         INIT_LIST_HEAD(&dwc->gadget.ep_list);
2045
2046         ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0);
2047         if (ret < 0) {
2048                 dev_err(dwc->dev, "failed to initialize OUT endpoints\n");
2049                 return ret;
2050         }
2051
2052         ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1);
2053         if (ret < 0) {
2054                 dev_err(dwc->dev, "failed to initialize IN endpoints\n");
2055                 return ret;
2056         }
2057
2058         return 0;
2059 }
2060
2061 static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
2062 {
2063         struct dwc3_ep                  *dep;
2064         u8                              epnum;
2065
2066         for (epnum = 0; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
2067                 dep = dwc->eps[epnum];
2068                 if (!dep)
2069                         continue;
2070                 /*
2071                  * Physical endpoints 0 and 1 are special; they form the
2072                  * bi-directional USB endpoint 0.
2073                  *
2074                  * For those two physical endpoints, we don't allocate a TRB
2075                  * pool nor do we add them the endpoints list. Due to that, we
2076                  * shouldn't do these two operations otherwise we would end up
2077                  * with all sorts of bugs when removing dwc3.ko.
2078                  */
2079                 if (epnum != 0 && epnum != 1) {
2080                         dwc3_free_trb_pool(dep);
2081                         list_del(&dep->endpoint.ep_list);
2082                 }
2083
2084                 kfree(dep);
2085         }
2086 }
2087
2088 /* -------------------------------------------------------------------------- */
2089
2090 static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
2091                 struct dwc3_request *req, struct dwc3_trb *trb,
2092                 const struct dwc3_event_depevt *event, int status,
2093                 int chain)
2094 {
2095         unsigned int            count;
2096         unsigned int            s_pkt = 0;
2097         unsigned int            trb_status;
2098
2099         dwc3_ep_inc_deq(dep);
2100
2101         if (req->trb == trb)
2102                 dep->queued_requests--;
2103
2104         trace_dwc3_complete_trb(dep, trb);
2105
2106         /*
2107          * If we're in the middle of series of chained TRBs and we
2108          * receive a short transfer along the way, DWC3 will skip
2109          * through all TRBs including the last TRB in the chain (the
2110          * where CHN bit is zero. DWC3 will also avoid clearing HWO
2111          * bit and SW has to do it manually.
2112          *
2113          * We're going to do that here to avoid problems of HW trying
2114          * to use bogus TRBs for transfers.
2115          */
2116         if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
2117                 trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
2118
2119         /*
2120          * If we're dealing with unaligned size OUT transfer, we will be left
2121          * with one TRB pending in the ring. We need to manually clear HWO bit
2122          * from that TRB.
2123          */
2124         if (req->unaligned && (trb->ctrl & DWC3_TRB_CTRL_HWO)) {
2125                 trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
2126                 return 1;
2127         }
2128
2129         if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
2130                 return 1;
2131
2132         count = trb->size & DWC3_TRB_SIZE_MASK;
2133         req->remaining += count;
2134
2135         if (dep->direction) {
2136                 if (count) {
2137                         trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
2138                         if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
2139                                 /*
2140                                  * If missed isoc occurred and there is
2141                                  * no request queued then issue END
2142                                  * TRANSFER, so that core generates
2143                                  * next xfernotready and we will issue
2144                                  * a fresh START TRANSFER.
2145                                  * If there are still queued request
2146                                  * then wait, do not issue either END
2147                                  * or UPDATE TRANSFER, just attach next
2148                                  * request in pending_list during
2149                                  * giveback.If any future queued request
2150                                  * is successfully transferred then we
2151                                  * will issue UPDATE TRANSFER for all
2152                                  * request in the pending_list.
2153                                  */
2154                                 dep->flags |= DWC3_EP_MISSED_ISOC;
2155                         } else {
2156                                 dev_err(dwc->dev, "incomplete IN transfer %s\n",
2157                                                 dep->name);
2158                                 status = -ECONNRESET;
2159                         }
2160                 } else {
2161                         dep->flags &= ~DWC3_EP_MISSED_ISOC;
2162                 }
2163         } else {
2164                 if (count && (event->status & DEPEVT_STATUS_SHORT))
2165                         s_pkt = 1;
2166         }
2167
2168         if (s_pkt && !chain)
2169                 return 1;
2170
2171         if ((event->status & DEPEVT_STATUS_IOC) &&
2172                         (trb->ctrl & DWC3_TRB_CTRL_IOC))
2173                 return 1;
2174
2175         return 0;
2176 }
2177
2178 static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
2179                 const struct dwc3_event_depevt *event, int status)
2180 {
2181         struct dwc3_request     *req, *n;
2182         struct dwc3_trb         *trb;
2183         bool                    ioc = false;
2184         int                     ret = 0;
2185
2186         list_for_each_entry_safe(req, n, &dep->started_list, list) {
2187                 unsigned length;
2188                 int chain;
2189
2190                 length = req->request.length;
2191                 chain = req->num_pending_sgs > 0;
2192                 if (chain) {
2193                         struct scatterlist *sg = req->sg;
2194                         struct scatterlist *s;
2195                         unsigned int pending = req->num_pending_sgs;
2196                         unsigned int i;
2197
2198                         for_each_sg(sg, s, pending, i) {
2199                                 trb = &dep->trb_pool[dep->trb_dequeue];
2200
2201                                 if (trb->ctrl & DWC3_TRB_CTRL_HWO)
2202                                         break;
2203
2204                                 req->sg = sg_next(s);
2205                                 req->num_pending_sgs--;
2206
2207                                 ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
2208                                                 event, status, chain);
2209                                 if (ret)
2210                                         break;
2211                         }
2212                 } else {
2213                         trb = &dep->trb_pool[dep->trb_dequeue];
2214                         ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
2215                                         event, status, chain);
2216                 }
2217
2218                 if (req->unaligned) {
2219                         trb = &dep->trb_pool[dep->trb_dequeue];
2220                         ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
2221                                         event, status, false);
2222                         req->unaligned = false;
2223                 }
2224
2225                 req->request.actual = length - req->remaining;
2226
2227                 if ((req->request.actual < length) && req->num_pending_sgs)
2228                         return __dwc3_gadget_kick_transfer(dep, 0);
2229
2230                 dwc3_gadget_giveback(dep, req, status);
2231
2232                 if (ret) {
2233                         if ((event->status & DEPEVT_STATUS_IOC) &&
2234                             (trb->ctrl & DWC3_TRB_CTRL_IOC))
2235                                 ioc = true;
2236                         break;
2237                 }
2238         }
2239
2240         /*
2241          * Our endpoint might get disabled by another thread during
2242          * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
2243          * early on so DWC3_EP_BUSY flag gets cleared
2244          */
2245         if (!dep->endpoint.desc)
2246                 return 1;
2247
2248         if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
2249                         list_empty(&dep->started_list)) {
2250                 if (list_empty(&dep->pending_list)) {
2251                         /*
2252                          * If there is no entry in request list then do
2253                          * not issue END TRANSFER now. Just set PENDING
2254                          * flag, so that END TRANSFER is issued when an
2255                          * entry is added into request list.
2256                          */
2257                         dep->flags = DWC3_EP_PENDING_REQUEST;
2258                 } else {
2259                         dwc3_stop_active_transfer(dwc, dep->number, true);
2260                         dep->flags = DWC3_EP_ENABLED;
2261                 }
2262                 return 1;
2263         }
2264
2265         if (usb_endpoint_xfer_isoc(dep->endpoint.desc) && ioc)
2266                 return 0;
2267
2268         return 1;
2269 }
2270
2271 static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
2272                 struct dwc3_ep *dep, const struct dwc3_event_depevt *event)
2273 {
2274         unsigned                status = 0;
2275         int                     clean_busy;
2276         u32                     is_xfer_complete;
2277
2278         is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE);
2279
2280         if (event->status & DEPEVT_STATUS_BUSERR)
2281                 status = -ECONNRESET;
2282
2283         clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
2284         if (clean_busy && (!dep->endpoint.desc || is_xfer_complete ||
2285                                 usb_endpoint_xfer_isoc(dep->endpoint.desc)))
2286                 dep->flags &= ~DWC3_EP_BUSY;
2287
2288         /*
2289          * WORKAROUND: This is the 2nd half of U1/U2 -> U0 workaround.
2290          * See dwc3_gadget_linksts_change_interrupt() for 1st half.
2291          */
2292         if (dwc->revision < DWC3_REVISION_183A) {
2293                 u32             reg;
2294                 int             i;
2295
2296                 for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
2297                         dep = dwc->eps[i];
2298
2299                         if (!(dep->flags & DWC3_EP_ENABLED))
2300                                 continue;
2301
2302                         if (!list_empty(&dep->started_list))
2303                                 return;
2304                 }
2305
2306                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2307                 reg |= dwc->u1u2;
2308                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2309
2310                 dwc->u1u2 = 0;
2311         }
2312
2313         /*
2314          * Our endpoint might get disabled by another thread during
2315          * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
2316          * early on so DWC3_EP_BUSY flag gets cleared
2317          */
2318         if (!dep->endpoint.desc)
2319                 return;
2320
2321         if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
2322                 int ret;
2323
2324                 ret = __dwc3_gadget_kick_transfer(dep, 0);
2325                 if (!ret || ret == -EBUSY)
2326                         return;
2327         }
2328 }
2329
2330 static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
2331                 const struct dwc3_event_depevt *event)
2332 {
2333         struct dwc3_ep          *dep;
2334         u8                      epnum = event->endpoint_number;
2335         u8                      cmd;
2336
2337         dep = dwc->eps[epnum];
2338
2339         if (!(dep->flags & DWC3_EP_ENABLED)) {
2340                 if (!(dep->flags & DWC3_EP_END_TRANSFER_PENDING))
2341                         return;
2342
2343                 /* Handle only EPCMDCMPLT when EP disabled */
2344                 if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT)
2345                         return;
2346         }
2347
2348         if (epnum == 0 || epnum == 1) {
2349                 dwc3_ep0_interrupt(dwc, event);
2350                 return;
2351         }
2352
2353         switch (event->endpoint_event) {
2354         case DWC3_DEPEVT_XFERCOMPLETE:
2355                 dep->resource_index = 0;
2356
2357                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
2358                         dev_err(dwc->dev, "XferComplete for Isochronous endpoint\n");
2359                         return;
2360                 }
2361
2362                 dwc3_endpoint_transfer_complete(dwc, dep, event);
2363                 break;
2364         case DWC3_DEPEVT_XFERINPROGRESS:
2365                 dwc3_endpoint_transfer_complete(dwc, dep, event);
2366                 break;
2367         case DWC3_DEPEVT_XFERNOTREADY:
2368                 if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
2369                         dwc3_gadget_start_isoc(dwc, dep, event);
2370                 } else {
2371                         int ret;
2372
2373                         ret = __dwc3_gadget_kick_transfer(dep, 0);
2374                         if (!ret || ret == -EBUSY)
2375                                 return;
2376                 }
2377
2378                 break;
2379         case DWC3_DEPEVT_STREAMEVT:
2380                 if (!usb_endpoint_xfer_bulk(dep->endpoint.desc)) {
2381                         dev_err(dwc->dev, "Stream event for non-Bulk %s\n",
2382                                         dep->name);
2383                         return;
2384                 }
2385                 break;
2386         case DWC3_DEPEVT_EPCMDCMPLT:
2387                 cmd = DEPEVT_PARAMETER_CMD(event->parameters);
2388
2389                 if (cmd == DWC3_DEPCMD_ENDTRANSFER) {
2390                         dep->flags &= ~DWC3_EP_END_TRANSFER_PENDING;
2391                         wake_up(&dep->wait_end_transfer);
2392                 }
2393                 break;
2394         case DWC3_DEPEVT_RXTXFIFOEVT:
2395                 break;
2396         }
2397 }
2398
2399 static void dwc3_disconnect_gadget(struct dwc3 *dwc)
2400 {
2401         if (dwc->gadget_driver && dwc->gadget_driver->disconnect) {
2402                 spin_unlock(&dwc->lock);
2403                 dwc->gadget_driver->disconnect(&dwc->gadget);
2404                 spin_lock(&dwc->lock);
2405         }
2406 }
2407
2408 static void dwc3_suspend_gadget(struct dwc3 *dwc)
2409 {
2410         if (dwc->gadget_driver && dwc->gadget_driver->suspend) {
2411                 spin_unlock(&dwc->lock);
2412                 dwc->gadget_driver->suspend(&dwc->gadget);
2413                 spin_lock(&dwc->lock);
2414         }
2415 }
2416
2417 static void dwc3_resume_gadget(struct dwc3 *dwc)
2418 {
2419         if (dwc->gadget_driver && dwc->gadget_driver->resume) {
2420                 spin_unlock(&dwc->lock);
2421                 dwc->gadget_driver->resume(&dwc->gadget);
2422                 spin_lock(&dwc->lock);
2423         }
2424 }
2425
2426 static void dwc3_reset_gadget(struct dwc3 *dwc)
2427 {
2428         if (!dwc->gadget_driver)
2429                 return;
2430
2431         if (dwc->gadget.speed != USB_SPEED_UNKNOWN) {
2432                 spin_unlock(&dwc->lock);
2433                 usb_gadget_udc_reset(&dwc->gadget, dwc->gadget_driver);
2434                 spin_lock(&dwc->lock);
2435         }
2436 }
2437
2438 static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
2439 {
2440         struct dwc3_ep *dep;
2441         struct dwc3_gadget_ep_cmd_params params;
2442         u32 cmd;
2443         int ret;
2444
2445         dep = dwc->eps[epnum];
2446
2447         if ((dep->flags & DWC3_EP_END_TRANSFER_PENDING) ||
2448             !dep->resource_index)
2449                 return;
2450
2451         /*
2452          * NOTICE: We are violating what the Databook says about the
2453          * EndTransfer command. Ideally we would _always_ wait for the
2454          * EndTransfer Command Completion IRQ, but that's causing too
2455          * much trouble synchronizing between us and gadget driver.
2456          *
2457          * We have discussed this with the IP Provider and it was
2458          * suggested to giveback all requests here, but give HW some
2459          * extra time to synchronize with the interconnect. We're using
2460          * an arbitrary 100us delay for that.
2461          *
2462          * Note also that a similar handling was tested by Synopsys
2463          * (thanks a lot Paul) and nothing bad has come out of it.
2464          * In short, what we're doing is:
2465          *
2466          * - Issue EndTransfer WITH CMDIOC bit set
2467          * - Wait 100us
2468          *
2469          * As of IP version 3.10a of the DWC_usb3 IP, the controller
2470          * supports a mode to work around the above limitation. The
2471          * software can poll the CMDACT bit in the DEPCMD register
2472          * after issuing a EndTransfer command. This mode is enabled
2473          * by writing GUCTL2[14]. This polling is already done in the
2474          * dwc3_send_gadget_ep_cmd() function so if the mode is
2475          * enabled, the EndTransfer command will have completed upon
2476          * returning from this function and we don't need to delay for
2477          * 100us.
2478          *
2479          * This mode is NOT available on the DWC_usb31 IP.
2480          */
2481
2482         cmd = DWC3_DEPCMD_ENDTRANSFER;
2483         cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0;
2484         cmd |= DWC3_DEPCMD_CMDIOC;
2485         cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
2486         memset(&params, 0, sizeof(params));
2487         ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
2488         WARN_ON_ONCE(ret);
2489         dep->resource_index = 0;
2490         dep->flags &= ~DWC3_EP_BUSY;
2491
2492         if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) {
2493                 dep->flags |= DWC3_EP_END_TRANSFER_PENDING;
2494                 udelay(100);
2495         }
2496 }
2497
2498 static void dwc3_clear_stall_all_ep(struct dwc3 *dwc)
2499 {
2500         u32 epnum;
2501
2502         for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) {
2503                 struct dwc3_ep *dep;
2504                 int ret;
2505
2506                 dep = dwc->eps[epnum];
2507                 if (!dep)
2508                         continue;
2509
2510                 if (!(dep->flags & DWC3_EP_STALL))
2511                         continue;
2512
2513                 dep->flags &= ~DWC3_EP_STALL;
2514
2515                 ret = dwc3_send_clear_stall_ep_cmd(dep);
2516                 WARN_ON_ONCE(ret);
2517         }
2518 }
2519
2520 static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
2521 {
2522         int                     reg;
2523
2524         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2525         reg &= ~DWC3_DCTL_INITU1ENA;
2526         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2527
2528         reg &= ~DWC3_DCTL_INITU2ENA;
2529         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2530
2531         dwc3_disconnect_gadget(dwc);
2532
2533         dwc->gadget.speed = USB_SPEED_UNKNOWN;
2534         dwc->setup_packet_pending = false;
2535         usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
2536
2537         dwc->connected = false;
2538 }
2539
2540 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
2541 {
2542         u32                     reg;
2543
2544         dwc->connected = true;
2545
2546         /*
2547          * WORKAROUND: DWC3 revisions <1.88a have an issue which
2548          * would cause a missing Disconnect Event if there's a
2549          * pending Setup Packet in the FIFO.
2550          *
2551          * There's no suggested workaround on the official Bug
2552          * report, which states that "unless the driver/application
2553          * is doing any special handling of a disconnect event,
2554          * there is no functional issue".
2555          *
2556          * Unfortunately, it turns out that we _do_ some special
2557          * handling of a disconnect event, namely complete all
2558          * pending transfers, notify gadget driver of the
2559          * disconnection, and so on.
2560          *
2561          * Our suggested workaround is to follow the Disconnect
2562          * Event steps here, instead, based on a setup_packet_pending
2563          * flag. Such flag gets set whenever we have a SETUP_PENDING
2564          * status for EP0 TRBs and gets cleared on XferComplete for the
2565          * same endpoint.
2566          *
2567          * Refers to:
2568          *
2569          * STAR#9000466709: RTL: Device : Disconnect event not
2570          * generated if setup packet pending in FIFO
2571          */
2572         if (dwc->revision < DWC3_REVISION_188A) {
2573                 if (dwc->setup_packet_pending)
2574                         dwc3_gadget_disconnect_interrupt(dwc);
2575         }
2576
2577         dwc3_reset_gadget(dwc);
2578
2579         reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2580         reg &= ~DWC3_DCTL_TSTCTRL_MASK;
2581         dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2582         dwc->test_mode = false;
2583         dwc3_clear_stall_all_ep(dwc);
2584
2585         /* Reset device address to zero */
2586         reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2587         reg &= ~(DWC3_DCFG_DEVADDR_MASK);
2588         dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2589 }
2590
2591 static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
2592 {
2593         struct dwc3_ep          *dep;
2594         int                     ret;
2595         u32                     reg;
2596         u8                      speed;
2597
2598         reg = dwc3_readl(dwc->regs, DWC3_DSTS);
2599         speed = reg & DWC3_DSTS_CONNECTSPD;
2600         dwc->speed = speed;
2601
2602         /*
2603          * RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
2604          * each time on Connect Done.
2605          *
2606          * Currently we always use the reset value. If any platform
2607          * wants to set this to a different value, we need to add a
2608          * setting and update GCTL.RAMCLKSEL here.
2609          */
2610
2611         switch (speed) {
2612         case DWC3_DSTS_SUPERSPEED_PLUS:
2613                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
2614                 dwc->gadget.ep0->maxpacket = 512;
2615                 dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
2616                 break;
2617         case DWC3_DSTS_SUPERSPEED:
2618                 /*
2619                  * WORKAROUND: DWC3 revisions <1.90a have an issue which
2620                  * would cause a missing USB3 Reset event.
2621                  *
2622                  * In such situations, we should force a USB3 Reset
2623                  * event by calling our dwc3_gadget_reset_interrupt()
2624                  * routine.
2625                  *
2626                  * Refers to:
2627                  *
2628                  * STAR#9000483510: RTL: SS : USB3 reset event may
2629                  * not be generated always when the link enters poll
2630                  */
2631                 if (dwc->revision < DWC3_REVISION_190A)
2632                         dwc3_gadget_reset_interrupt(dwc);
2633
2634                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
2635                 dwc->gadget.ep0->maxpacket = 512;
2636                 dwc->gadget.speed = USB_SPEED_SUPER;
2637                 break;
2638         case DWC3_DSTS_HIGHSPEED:
2639                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2640                 dwc->gadget.ep0->maxpacket = 64;
2641                 dwc->gadget.speed = USB_SPEED_HIGH;
2642                 break;
2643         case DWC3_DSTS_FULLSPEED:
2644                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
2645                 dwc->gadget.ep0->maxpacket = 64;
2646                 dwc->gadget.speed = USB_SPEED_FULL;
2647                 break;
2648         case DWC3_DSTS_LOWSPEED:
2649                 dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
2650                 dwc->gadget.ep0->maxpacket = 8;
2651                 dwc->gadget.speed = USB_SPEED_LOW;
2652                 break;
2653         }
2654
2655         /* Enable USB2 LPM Capability */
2656
2657         if ((dwc->revision > DWC3_REVISION_194A) &&
2658             (speed != DWC3_DSTS_SUPERSPEED) &&
2659             (speed != DWC3_DSTS_SUPERSPEED_PLUS)) {
2660                 reg = dwc3_readl(dwc->regs, DWC3_DCFG);
2661                 reg |= DWC3_DCFG_LPM_CAP;
2662                 dwc3_writel(dwc->regs, DWC3_DCFG, reg);
2663
2664                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2665                 reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN);
2666
2667                 reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold);
2668
2669                 /*
2670                  * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and
2671                  * DCFG.LPMCap is set, core responses with an ACK and the
2672                  * BESL value in the LPM token is less than or equal to LPM
2673                  * NYET threshold.
2674                  */
2675                 WARN_ONCE(dwc->revision < DWC3_REVISION_240A
2676                                 && dwc->has_lpm_erratum,
2677                                 "LPM Erratum not available on dwc3 revisions < 2.40a\n");
2678
2679                 if (dwc->has_lpm_erratum && dwc->revision >= DWC3_REVISION_240A)
2680                         reg |= DWC3_DCTL_LPM_ERRATA(dwc->lpm_nyet_threshold);
2681
2682                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2683         } else {
2684                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2685                 reg &= ~DWC3_DCTL_HIRD_THRES_MASK;
2686                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2687         }
2688
2689         dep = dwc->eps[0];
2690         ret = __dwc3_gadget_ep_enable(dep, true, false);
2691         if (ret) {
2692                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2693                 return;
2694         }
2695
2696         dep = dwc->eps[1];
2697         ret = __dwc3_gadget_ep_enable(dep, true, false);
2698         if (ret) {
2699                 dev_err(dwc->dev, "failed to enable %s\n", dep->name);
2700                 return;
2701         }
2702
2703         /*
2704          * Configure PHY via GUSB3PIPECTLn if required.
2705          *
2706          * Update GTXFIFOSIZn
2707          *
2708          * In both cases reset values should be sufficient.
2709          */
2710 }
2711
2712 static void dwc3_gadget_wakeup_interrupt(struct dwc3 *dwc)
2713 {
2714         /*
2715          * TODO take core out of low power mode when that's
2716          * implemented.
2717          */
2718
2719         if (dwc->gadget_driver && dwc->gadget_driver->resume) {
2720                 spin_unlock(&dwc->lock);
2721                 dwc->gadget_driver->resume(&dwc->gadget);
2722                 spin_lock(&dwc->lock);
2723         }
2724 }
2725
2726 static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
2727                 unsigned int evtinfo)
2728 {
2729         enum dwc3_link_state    next = evtinfo & DWC3_LINK_STATE_MASK;
2730         unsigned int            pwropt;
2731
2732         /*
2733          * WORKAROUND: DWC3 < 2.50a have an issue when configured without
2734          * Hibernation mode enabled which would show up when device detects
2735          * host-initiated U3 exit.
2736          *
2737          * In that case, device will generate a Link State Change Interrupt
2738          * from U3 to RESUME which is only necessary if Hibernation is
2739          * configured in.
2740          *
2741          * There are no functional changes due to such spurious event and we
2742          * just need to ignore it.
2743          *
2744          * Refers to:
2745          *
2746          * STAR#9000570034 RTL: SS Resume event generated in non-Hibernation
2747          * operational mode
2748          */
2749         pwropt = DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1);
2750         if ((dwc->revision < DWC3_REVISION_250A) &&
2751                         (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) {
2752                 if ((dwc->link_state == DWC3_LINK_STATE_U3) &&
2753                                 (next == DWC3_LINK_STATE_RESUME)) {
2754                         return;
2755                 }
2756         }
2757
2758         /*
2759          * WORKAROUND: DWC3 Revisions <1.83a have an issue which, depending
2760          * on the link partner, the USB session might do multiple entry/exit
2761          * of low power states before a transfer takes place.
2762          *
2763          * Due to this problem, we might experience lower throughput. The
2764          * suggested workaround is to disable DCTL[12:9] bits if we're
2765          * transitioning from U1/U2 to U0 and enable those bits again
2766          * after a transfer completes and there are no pending transfers
2767          * on any of the enabled endpoints.
2768          *
2769          * This is the first half of that workaround.
2770          *
2771          * Refers to:
2772          *
2773          * STAR#9000446952: RTL: Device SS : if U1/U2 ->U0 takes >128us
2774          * core send LGO_Ux entering U0
2775          */
2776         if (dwc->revision < DWC3_REVISION_183A) {
2777                 if (next == DWC3_LINK_STATE_U0) {
2778                         u32     u1u2;
2779                         u32     reg;
2780
2781                         switch (dwc->link_state) {
2782                         case DWC3_LINK_STATE_U1:
2783                         case DWC3_LINK_STATE_U2:
2784                                 reg = dwc3_readl(dwc->regs, DWC3_DCTL);
2785                                 u1u2 = reg & (DWC3_DCTL_INITU2ENA
2786                                                 | DWC3_DCTL_ACCEPTU2ENA
2787                                                 | DWC3_DCTL_INITU1ENA
2788                                                 | DWC3_DCTL_ACCEPTU1ENA);
2789
2790                                 if (!dwc->u1u2)
2791                                         dwc->u1u2 = reg & u1u2;
2792
2793                                 reg &= ~u1u2;
2794
2795                                 dwc3_writel(dwc->regs, DWC3_DCTL, reg);
2796                                 break;
2797                         default:
2798                                 /* do nothing */
2799                                 break;
2800                         }
2801                 }
2802         }
2803
2804         switch (next) {
2805         case DWC3_LINK_STATE_U1:
2806                 if (dwc->speed == USB_SPEED_SUPER)
2807                         dwc3_suspend_gadget(dwc);
2808                 break;
2809         case DWC3_LINK_STATE_U2:
2810         case DWC3_LINK_STATE_U3:
2811                 dwc3_suspend_gadget(dwc);
2812                 break;
2813         case DWC3_LINK_STATE_RESUME:
2814                 dwc3_resume_gadget(dwc);
2815                 break;
2816         default:
2817                 /* do nothing */
2818                 break;
2819         }
2820
2821         dwc->link_state = next;
2822 }
2823
2824 static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
2825                                           unsigned int evtinfo)
2826 {
2827         enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
2828
2829         if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
2830                 dwc3_suspend_gadget(dwc);
2831
2832         dwc->link_state = next;
2833 }
2834
2835 static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
2836                 unsigned int evtinfo)
2837 {
2838         unsigned int is_ss = evtinfo & BIT(4);
2839
2840         /**
2841          * WORKAROUND: DWC3 revison 2.20a with hibernation support
2842          * have a known issue which can cause USB CV TD.9.23 to fail
2843          * randomly.
2844          *
2845          * Because of this issue, core could generate bogus hibernation
2846          * events which SW needs to ignore.
2847          *
2848          * Refers to:
2849          *
2850          * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0
2851          * Device Fallback from SuperSpeed
2852          */
2853         if (is_ss ^ (dwc->speed == USB_SPEED_SUPER))
2854                 return;
2855
2856         /* enter hibernation here */
2857 }
2858
2859 static void dwc3_gadget_interrupt(struct dwc3 *dwc,
2860                 const struct dwc3_event_devt *event)
2861 {
2862         switch (event->type) {
2863         case DWC3_DEVICE_EVENT_DISCONNECT:
2864                 dwc3_gadget_disconnect_interrupt(dwc);
2865                 break;
2866         case DWC3_DEVICE_EVENT_RESET:
2867                 dwc3_gadget_reset_interrupt(dwc);
2868                 break;
2869         case DWC3_DEVICE_EVENT_CONNECT_DONE:
2870                 dwc3_gadget_conndone_interrupt(dwc);
2871                 break;
2872         case DWC3_DEVICE_EVENT_WAKEUP:
2873                 dwc3_gadget_wakeup_interrupt(dwc);
2874                 break;
2875         case DWC3_DEVICE_EVENT_HIBER_REQ:
2876                 if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation,
2877                                         "unexpected hibernation event\n"))
2878                         break;
2879
2880                 dwc3_gadget_hibernation_interrupt(dwc, event->event_info);
2881                 break;
2882         case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
2883                 dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
2884                 break;
2885         case DWC3_DEVICE_EVENT_EOPF:
2886                 /* It changed to be suspend event for version 2.30a and above */
2887                 if (dwc->revision >= DWC3_REVISION_230A) {
2888                         /*
2889                          * Ignore suspend event until the gadget enters into
2890                          * USB_STATE_CONFIGURED state.
2891                          */
2892                         if (dwc->gadget.state >= USB_STATE_CONFIGURED)
2893                                 dwc3_gadget_suspend_interrupt(dwc,
2894                                                 event->event_info);
2895                 }
2896                 break;
2897         case DWC3_DEVICE_EVENT_SOF:
2898         case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
2899         case DWC3_DEVICE_EVENT_CMD_CMPL:
2900         case DWC3_DEVICE_EVENT_OVERFLOW:
2901                 break;
2902         default:
2903                 dev_WARN(dwc->dev, "UNKNOWN IRQ %d\n", event->type);
2904         }
2905 }
2906
2907 static void dwc3_process_event_entry(struct dwc3 *dwc,
2908                 const union dwc3_event *event)
2909 {
2910         trace_dwc3_event(event->raw, dwc);
2911
2912         /* Endpoint IRQ, handle it and return early */
2913         if (event->type.is_devspec == 0) {
2914                 /* depevt */
2915                 return dwc3_endpoint_interrupt(dwc, &event->depevt);
2916         }
2917
2918         switch (event->type.type) {
2919         case DWC3_EVENT_TYPE_DEV:
2920                 dwc3_gadget_interrupt(dwc, &event->devt);
2921                 break;
2922         /* REVISIT what to do with Carkit and I2C events ? */
2923         default:
2924                 dev_err(dwc->dev, "UNKNOWN IRQ type %d\n", event->raw);
2925         }
2926 }
2927
2928 static irqreturn_t dwc3_process_event_buf(struct dwc3_event_buffer *evt)
2929 {
2930         struct dwc3 *dwc = evt->dwc;
2931         irqreturn_t ret = IRQ_NONE;
2932         int left;
2933         u32 reg;
2934
2935         left = evt->count;
2936
2937         if (!(evt->flags & DWC3_EVENT_PENDING))
2938                 return IRQ_NONE;
2939
2940         while (left > 0) {
2941                 union dwc3_event event;
2942
2943                 event.raw = *(u32 *) (evt->cache + evt->lpos);
2944
2945                 dwc3_process_event_entry(dwc, &event);
2946
2947                 /*
2948                  * FIXME we wrap around correctly to the next entry as
2949                  * almost all entries are 4 bytes in size. There is one
2950                  * entry which has 12 bytes which is a regular entry
2951                  * followed by 8 bytes data. ATM I don't know how
2952                  * things are organized if we get next to the a
2953                  * boundary so I worry about that once we try to handle
2954                  * that.
2955                  */
2956                 evt->lpos = (evt->lpos + 4) % evt->length;
2957                 left -= 4;
2958         }
2959
2960         evt->count = 0;
2961         evt->flags &= ~DWC3_EVENT_PENDING;
2962         ret = IRQ_HANDLED;
2963
2964         /* Unmask interrupt */
2965         reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
2966         reg &= ~DWC3_GEVNTSIZ_INTMASK;
2967         dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
2968
2969         if (dwc->imod_interval) {
2970                 dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), DWC3_GEVNTCOUNT_EHB);
2971                 dwc3_writel(dwc->regs, DWC3_DEV_IMOD(0), dwc->imod_interval);
2972         }
2973
2974         return ret;
2975 }
2976
2977 static irqreturn_t dwc3_thread_interrupt(int irq, void *_evt)
2978 {
2979         struct dwc3_event_buffer *evt = _evt;
2980         struct dwc3 *dwc = evt->dwc;
2981         unsigned long flags;
2982         irqreturn_t ret = IRQ_NONE;
2983
2984         spin_lock_irqsave(&dwc->lock, flags);
2985         ret = dwc3_process_event_buf(evt);
2986         spin_unlock_irqrestore(&dwc->lock, flags);
2987
2988         return ret;
2989 }
2990
2991 static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt)
2992 {
2993         struct dwc3 *dwc = evt->dwc;
2994         u32 amount;
2995         u32 count;
2996         u32 reg;
2997
2998         if (pm_runtime_suspended(dwc->dev)) {
2999                 pm_runtime_get(dwc->dev);
3000                 disable_irq_nosync(dwc->irq_gadget);
3001                 dwc->pending_events = true;
3002                 return IRQ_HANDLED;
3003         }
3004
3005         count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
3006         count &= DWC3_GEVNTCOUNT_MASK;
3007         if (!count)
3008                 return IRQ_NONE;
3009
3010         evt->count = count;
3011         evt->flags |= DWC3_EVENT_PENDING;
3012
3013         /* Mask interrupt */
3014         reg = dwc3_readl(dwc->regs, DWC3_GEVNTSIZ(0));
3015         reg |= DWC3_GEVNTSIZ_INTMASK;
3016         dwc3_writel(dwc->regs, DWC3_GEVNTSIZ(0), reg);
3017
3018         amount = min(count, evt->length - evt->lpos);
3019         memcpy(evt->cache + evt->lpos, evt->buf + evt->lpos, amount);
3020
3021         if (amount < count)
3022                 memcpy(evt->cache, evt->buf, count - amount);
3023
3024         dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), count);
3025
3026         return IRQ_WAKE_THREAD;
3027 }
3028
3029 static irqreturn_t dwc3_interrupt(int irq, void *_evt)
3030 {
3031         struct dwc3_event_buffer        *evt = _evt;
3032
3033         return dwc3_check_event_buf(evt);
3034 }
3035
3036 static int dwc3_gadget_get_irq(struct dwc3 *dwc)
3037 {
3038         struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
3039         int irq;
3040
3041         irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
3042         if (irq > 0)
3043                 goto out;
3044
3045         if (irq == -EPROBE_DEFER)
3046                 goto out;
3047
3048         irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
3049         if (irq > 0)
3050                 goto out;
3051
3052         if (irq == -EPROBE_DEFER)
3053                 goto out;
3054
3055         irq = platform_get_irq(dwc3_pdev, 0);
3056         if (irq > 0)
3057                 goto out;
3058
3059         if (irq != -EPROBE_DEFER)
3060                 dev_err(dwc->dev, "missing peripheral IRQ\n");
3061
3062         if (!irq)
3063                 irq = -EINVAL;
3064
3065 out:
3066         return irq;
3067 }
3068
3069 /**
3070  * dwc3_gadget_init - Initializes gadget related registers
3071  * @dwc: pointer to our controller context structure
3072  *
3073  * Returns 0 on success otherwise negative errno.
3074  */
3075 int dwc3_gadget_init(struct dwc3 *dwc)
3076 {
3077         int ret;
3078         int irq;
3079
3080         irq = dwc3_gadget_get_irq(dwc);
3081         if (irq < 0) {
3082                 ret = irq;
3083                 goto err0;
3084         }
3085
3086         dwc->irq_gadget = irq;
3087
3088         dwc->ctrl_req = dma_alloc_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
3089                         &dwc->ctrl_req_addr, GFP_KERNEL);
3090         if (!dwc->ctrl_req) {
3091                 dev_err(dwc->dev, "failed to allocate ctrl request\n");
3092                 ret = -ENOMEM;
3093                 goto err0;
3094         }
3095
3096         dwc->ep0_trb = dma_alloc_coherent(dwc->sysdev,
3097                                           sizeof(*dwc->ep0_trb) * 2,
3098                                           &dwc->ep0_trb_addr, GFP_KERNEL);
3099         if (!dwc->ep0_trb) {
3100                 dev_err(dwc->dev, "failed to allocate ep0 trb\n");
3101                 ret = -ENOMEM;
3102                 goto err1;
3103         }
3104
3105         dwc->setup_buf = kzalloc(DWC3_EP0_BOUNCE_SIZE, GFP_KERNEL);
3106         if (!dwc->setup_buf) {
3107                 ret = -ENOMEM;
3108                 goto err2;
3109         }
3110
3111         dwc->ep0_bounce = dma_alloc_coherent(dwc->sysdev,
3112                         DWC3_EP0_BOUNCE_SIZE, &dwc->ep0_bounce_addr,
3113                         GFP_KERNEL);
3114         if (!dwc->ep0_bounce) {
3115                 dev_err(dwc->dev, "failed to allocate ep0 bounce buffer\n");
3116                 ret = -ENOMEM;
3117                 goto err3;
3118         }
3119
3120         dwc->zlp_buf = kzalloc(DWC3_ZLP_BUF_SIZE, GFP_KERNEL);
3121         if (!dwc->zlp_buf) {
3122                 ret = -ENOMEM;
3123                 goto err4;
3124         }
3125
3126         dwc->bounce = dma_alloc_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE,
3127                         &dwc->bounce_addr, GFP_KERNEL);
3128         if (!dwc->bounce) {
3129                 ret = -ENOMEM;
3130                 goto err5;
3131         }
3132
3133         init_completion(&dwc->ep0_in_setup);
3134
3135         dwc->gadget.ops                 = &dwc3_gadget_ops;
3136         dwc->gadget.speed               = USB_SPEED_UNKNOWN;
3137         dwc->gadget.sg_supported        = true;
3138         dwc->gadget.name                = "dwc3-gadget";
3139         dwc->gadget.is_otg              = dwc->dr_mode == USB_DR_MODE_OTG;
3140
3141         /*
3142          * FIXME We might be setting max_speed to <SUPER, however versions
3143          * <2.20a of dwc3 have an issue with metastability (documented
3144          * elsewhere in this driver) which tells us we can't set max speed to
3145          * anything lower than SUPER.
3146          *
3147          * Because gadget.max_speed is only used by composite.c and function
3148          * drivers (i.e. it won't go into dwc3's registers) we are allowing this
3149          * to happen so we avoid sending SuperSpeed Capability descriptor
3150          * together with our BOS descriptor as that could confuse host into
3151          * thinking we can handle super speed.
3152          *
3153          * Note that, in fact, we won't even support GetBOS requests when speed
3154          * is less than super speed because we don't have means, yet, to tell
3155          * composite.c that we are USB 2.0 + LPM ECN.
3156          */
3157         if (dwc->revision < DWC3_REVISION_220A)
3158                 dev_info(dwc->dev, "changing max_speed on rev %08x\n",
3159                                 dwc->revision);
3160
3161         dwc->gadget.max_speed           = dwc->maximum_speed;
3162
3163         /*
3164          * REVISIT: Here we should clear all pending IRQs to be
3165          * sure we're starting from a well known location.
3166          */
3167
3168         ret = dwc3_gadget_init_endpoints(dwc);
3169         if (ret)
3170                 goto err6;
3171
3172         ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
3173         if (ret) {
3174                 dev_err(dwc->dev, "failed to register udc\n");
3175                 goto err6;
3176         }
3177
3178         return 0;
3179 err6:
3180         dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
3181                         dwc->bounce_addr);
3182
3183 err5:
3184         kfree(dwc->zlp_buf);
3185
3186 err4:
3187         dwc3_gadget_free_endpoints(dwc);
3188         dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE,
3189                         dwc->ep0_bounce, dwc->ep0_bounce_addr);
3190
3191 err3:
3192         kfree(dwc->setup_buf);
3193
3194 err2:
3195         dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
3196                         dwc->ep0_trb, dwc->ep0_trb_addr);
3197
3198 err1:
3199         dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
3200                         dwc->ctrl_req, dwc->ctrl_req_addr);
3201
3202 err0:
3203         return ret;
3204 }
3205
3206 /* -------------------------------------------------------------------------- */
3207
3208 void dwc3_gadget_exit(struct dwc3 *dwc)
3209 {
3210         usb_del_gadget_udc(&dwc->gadget);
3211
3212         dwc3_gadget_free_endpoints(dwc);
3213
3214         dma_free_coherent(dwc->sysdev, DWC3_BOUNCE_SIZE, dwc->bounce,
3215                         dwc->bounce_addr);
3216         dma_free_coherent(dwc->sysdev, DWC3_EP0_BOUNCE_SIZE,
3217                         dwc->ep0_bounce, dwc->ep0_bounce_addr);
3218
3219         kfree(dwc->setup_buf);
3220         kfree(dwc->zlp_buf);
3221
3222         dma_free_coherent(dwc->sysdev, sizeof(*dwc->ep0_trb) * 2,
3223                         dwc->ep0_trb, dwc->ep0_trb_addr);
3224
3225         dma_free_coherent(dwc->sysdev, sizeof(*dwc->ctrl_req),
3226                         dwc->ctrl_req, dwc->ctrl_req_addr);
3227 }
3228
3229 int dwc3_gadget_suspend(struct dwc3 *dwc)
3230 {
3231         int ret;
3232
3233         if (!dwc->gadget_driver)
3234                 return 0;
3235
3236         ret = dwc3_gadget_run_stop(dwc, false, false);
3237         if (ret < 0)
3238                 return ret;
3239
3240         dwc3_disconnect_gadget(dwc);
3241         __dwc3_gadget_stop(dwc);
3242
3243         return 0;
3244 }
3245
3246 int dwc3_gadget_resume(struct dwc3 *dwc)
3247 {
3248         int                     ret;
3249
3250         if (!dwc->gadget_driver)
3251                 return 0;
3252
3253         ret = __dwc3_gadget_start(dwc);
3254         if (ret < 0)
3255                 goto err0;
3256
3257         ret = dwc3_gadget_run_stop(dwc, true, false);
3258         if (ret < 0)
3259                 goto err1;
3260
3261         return 0;
3262
3263 err1:
3264         __dwc3_gadget_stop(dwc);
3265
3266 err0:
3267         return ret;
3268 }
3269
3270 void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
3271 {
3272         if (dwc->pending_events) {
3273                 dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
3274                 dwc->pending_events = false;
3275                 enable_irq(dwc->irq_gadget);
3276         }
3277 }