2 * Copyright (C) 2001-2004 by David Brownell
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the
6 * Free Software Foundation; either version 2 of the License, or (at your
7 * option) any later version.
9 * This program is distributed in the hope that it will be useful, but
10 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software Foundation,
16 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 /* this file is part of ehci-hcd.c */
21 /*-------------------------------------------------------------------------*/
24 * EHCI Root Hub ... the nonsharable stuff
26 * Registers don't need cpu_to_le32, that happens transparently
29 /*-------------------------------------------------------------------------*/
30 #include <linux/usb/otg.h>
32 #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
36 static int ehci_hub_control(
45 /* After a power loss, ports that were owned by the companion must be
46 * reset so that the companion can still own them.
48 static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
54 struct usb_hcd *hcd = ehci_to_hcd(ehci);
56 if (!ehci->owned_ports)
59 /* Give the connections some time to appear */
62 spin_lock_irq(&ehci->lock);
63 port = HCS_N_PORTS(ehci->hcs_params);
65 if (test_bit(port, &ehci->owned_ports)) {
66 reg = &ehci->regs->port_status[port];
67 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
69 /* Port already owned by companion? */
70 if (status & PORT_OWNER)
71 clear_bit(port, &ehci->owned_ports);
72 else if (test_bit(port, &ehci->companion_ports))
73 ehci_writel(ehci, status & ~PORT_PE, reg);
75 spin_unlock_irq(&ehci->lock);
76 ehci_hub_control(hcd, SetPortFeature,
77 USB_PORT_FEAT_RESET, port + 1,
79 spin_lock_irq(&ehci->lock);
83 spin_unlock_irq(&ehci->lock);
85 if (!ehci->owned_ports)
87 msleep(90); /* Wait for resets to complete */
89 spin_lock_irq(&ehci->lock);
90 port = HCS_N_PORTS(ehci->hcs_params);
92 if (test_bit(port, &ehci->owned_ports)) {
93 spin_unlock_irq(&ehci->lock);
94 ehci_hub_control(hcd, GetPortStatus,
96 (char *) &buf, sizeof(buf));
97 spin_lock_irq(&ehci->lock);
99 /* The companion should now own the port,
100 * but if something went wrong the port must not
103 reg = &ehci->regs->port_status[port];
104 status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
105 if (status & PORT_OWNER)
106 ehci_writel(ehci, status | PORT_CSC, reg);
108 ehci_dbg(ehci, "failed handover port %d: %x\n",
110 ehci_writel(ehci, status & ~PORT_PE, reg);
115 ehci->owned_ports = 0;
116 spin_unlock_irq(&ehci->lock);
119 static int ehci_port_change(struct ehci_hcd *ehci)
121 int i = HCS_N_PORTS(ehci->hcs_params);
123 /* First check if the controller indicates a change event */
125 if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
129 * Not all controllers appear to update this while going from D3 to D0,
130 * so check the individual port status registers as well
134 if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
140 static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
141 bool suspending, bool do_wakeup)
146 /* If remote wakeup is enabled for the root hub but disabled
147 * for the controller, we must adjust all the port wakeup flags
148 * when the controller is suspended or resumed. In all other
149 * cases they don't need to be changed.
151 if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
154 spin_lock_irq(&ehci->lock);
156 /* clear phy low-power mode before changing wakeup flags */
157 if (ehci->has_hostpc) {
158 port = HCS_N_PORTS(ehci->hcs_params);
160 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
162 temp = ehci_readl(ehci, hostpc_reg);
163 ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
165 spin_unlock_irq(&ehci->lock);
167 spin_lock_irq(&ehci->lock);
170 port = HCS_N_PORTS(ehci->hcs_params);
172 u32 __iomem *reg = &ehci->regs->port_status[port];
173 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
174 u32 t2 = t1 & ~PORT_WAKE_BITS;
176 /* If we are suspending the controller, clear the flags.
177 * If we are resuming the controller, set the wakeup flags.
180 if (t1 & PORT_CONNECT)
181 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
183 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
185 ehci_vdbg(ehci, "port %d, %08x -> %08x\n",
187 ehci_writel(ehci, t2, reg);
190 /* enter phy low-power mode again */
191 if (ehci->has_hostpc) {
192 port = HCS_N_PORTS(ehci->hcs_params);
194 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
196 temp = ehci_readl(ehci, hostpc_reg);
197 ehci_writel(ehci, temp | HOSTPC_PHCD, hostpc_reg);
201 /* Does the root hub have a port wakeup pending? */
202 if (!suspending && ehci_port_change(ehci))
203 usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
205 spin_unlock_irq(&ehci->lock);
208 static int ehci_bus_suspend (struct usb_hcd *hcd)
210 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
215 ehci_dbg(ehci, "suspend root hub\n");
217 if (time_before (jiffies, ehci->next_statechange))
220 /* stop the schedules */
223 spin_lock_irq (&ehci->lock);
224 if (ehci->rh_state < EHCI_RH_RUNNING)
227 /* Once the controller is stopped, port resumes that are already
228 * in progress won't complete. Hence if remote wakeup is enabled
229 * for the root hub and any ports are in the middle of a resume or
230 * remote wakeup, we must fail the suspend.
232 if (hcd->self.root_hub->do_remote_wakeup) {
233 if (ehci->resuming_ports) {
234 spin_unlock_irq(&ehci->lock);
235 ehci_dbg(ehci, "suspend failed because a port is resuming\n");
240 /* Unlike other USB host controller types, EHCI doesn't have
241 * any notion of "global" or bus-wide suspend. The driver has
242 * to manually suspend all the active unsuspended ports, and
243 * then manually resume them in the bus_resume() routine.
245 ehci->bus_suspended = 0;
246 ehci->owned_ports = 0;
248 port = HCS_N_PORTS(ehci->hcs_params);
250 u32 __iomem *reg = &ehci->regs->port_status [port];
251 u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
252 u32 t2 = t1 & ~PORT_WAKE_BITS;
254 /* keep track of which ports we suspend */
256 set_bit(port, &ehci->owned_ports);
257 else if ((t1 & PORT_PE) && !(t1 & PORT_SUSPEND)) {
259 set_bit(port, &ehci->bus_suspended);
262 /* enable remote wakeup on all ports, if told to do so */
263 if (hcd->self.root_hub->do_remote_wakeup) {
264 /* only enable appropriate wake bits, otherwise the
265 * hardware can not go phy low power mode. If a race
266 * condition happens here(connection change during bits
267 * set), the port change detection will finally fix it.
269 if (t1 & PORT_CONNECT)
270 t2 |= PORT_WKOC_E | PORT_WKDISC_E;
272 t2 |= PORT_WKOC_E | PORT_WKCONN_E;
276 ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
278 ehci_writel(ehci, t2, reg);
283 if (changed && ehci->has_hostpc) {
284 spin_unlock_irq(&ehci->lock);
285 msleep(5); /* 5 ms for HCD to enter low-power mode */
286 spin_lock_irq(&ehci->lock);
288 port = HCS_N_PORTS(ehci->hcs_params);
290 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port];
293 t3 = ehci_readl(ehci, hostpc_reg);
294 ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
295 t3 = ehci_readl(ehci, hostpc_reg);
296 ehci_dbg(ehci, "Port %d phy low-power mode %s\n",
297 port, (t3 & HOSTPC_PHCD) ?
298 "succeeded" : "failed");
301 spin_unlock_irq(&ehci->lock);
303 /* Apparently some devices need a >= 1-uframe delay here */
304 if (ehci->bus_suspended)
307 /* turn off now-idle HC */
310 spin_lock_irq(&ehci->lock);
311 if (ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_POLL_DEAD))
312 ehci_handle_controller_death(ehci);
313 if (ehci->rh_state != EHCI_RH_RUNNING)
315 ehci->rh_state = EHCI_RH_SUSPENDED;
317 end_unlink_async(ehci);
318 unlink_empty_async(ehci);
319 ehci_handle_intr_unlinks(ehci);
322 /* allow remote wakeup */
324 if (!hcd->self.root_hub->do_remote_wakeup)
326 ehci_writel(ehci, mask, &ehci->regs->intr_enable);
327 ehci_readl(ehci, &ehci->regs->intr_enable);
330 ehci->next_statechange = jiffies + msecs_to_jiffies(10);
331 ehci->enabled_hrtimer_events = 0;
332 ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
333 spin_unlock_irq (&ehci->lock);
335 hrtimer_cancel(&ehci->hrtimer);
340 /* caller has locked the root hub, and should reset/reinit on error */
341 static int ehci_bus_resume (struct usb_hcd *hcd)
343 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
347 unsigned long resume_needed = 0;
349 if (time_before (jiffies, ehci->next_statechange))
351 spin_lock_irq (&ehci->lock);
352 if (!HCD_HW_ACCESSIBLE(hcd) || ehci->shutdown)
355 if (unlikely(ehci->debug)) {
356 if (!dbgp_reset_prep(hcd))
359 dbgp_external_startup(hcd);
362 /* Ideally and we've got a real resume here, and no port's power
363 * was lost. (For PCI, that means Vaux was maintained.) But we
364 * could instead be restoring a swsusp snapshot -- so that BIOS was
365 * the last user of the controller, not reset/pm hardware keeping
366 * state we gave to it.
368 power_okay = ehci_readl(ehci, &ehci->regs->intr_enable);
369 ehci_dbg(ehci, "resume root hub%s\n",
370 power_okay ? "" : " after power loss");
372 /* at least some APM implementations will try to deliver
373 * IRQs right away, so delay them until we're ready.
375 ehci_writel(ehci, 0, &ehci->regs->intr_enable);
377 /* re-init operational registers */
378 ehci_writel(ehci, 0, &ehci->regs->segment);
379 ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
380 ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
382 /* restore CMD_RUN, framelist size, and irq threshold */
383 ehci->command |= CMD_RUN;
384 ehci_writel(ehci, ehci->command, &ehci->regs->command);
385 ehci->rh_state = EHCI_RH_RUNNING;
387 /* Some controller/firmware combinations need a delay during which
388 * they set up the port statuses. See Bugzilla #8190. */
389 spin_unlock_irq(&ehci->lock);
391 spin_lock_irq(&ehci->lock);
395 /* clear phy low-power mode before resume */
396 if (ehci->bus_suspended && ehci->has_hostpc) {
397 i = HCS_N_PORTS(ehci->hcs_params);
399 if (test_bit(i, &ehci->bus_suspended)) {
400 u32 __iomem *hostpc_reg =
401 &ehci->regs->hostpc[i];
403 temp = ehci_readl(ehci, hostpc_reg);
404 ehci_writel(ehci, temp & ~HOSTPC_PHCD,
408 spin_unlock_irq(&ehci->lock);
410 spin_lock_irq(&ehci->lock);
415 /* manually resume the ports we suspended during bus_suspend() */
416 i = HCS_N_PORTS (ehci->hcs_params);
418 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
419 temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
420 if (test_bit(i, &ehci->bus_suspended) &&
421 (temp & PORT_SUSPEND)) {
423 set_bit(i, &resume_needed);
425 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
428 /* msleep for 20ms only if code is trying to resume port */
430 spin_unlock_irq(&ehci->lock);
432 spin_lock_irq(&ehci->lock);
437 i = HCS_N_PORTS (ehci->hcs_params);
439 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
440 if (test_bit(i, &resume_needed)) {
441 temp &= ~(PORT_RWC_BITS | PORT_RESUME);
442 ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
443 ehci_vdbg (ehci, "resumed port %d\n", i + 1);
447 ehci->next_statechange = jiffies + msecs_to_jiffies(5);
448 spin_unlock_irq(&ehci->lock);
450 ehci_handover_companion_ports(ehci);
452 /* Now we can safely re-enable irqs */
453 spin_lock_irq(&ehci->lock);
456 ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
457 (void) ehci_readl(ehci, &ehci->regs->intr_enable);
458 spin_unlock_irq(&ehci->lock);
463 spin_unlock_irq(&ehci->lock);
469 #define ehci_bus_suspend NULL
470 #define ehci_bus_resume NULL
472 #endif /* CONFIG_PM */
474 /*-------------------------------------------------------------------------*/
477 * Sets the owner of a port
479 static void set_owner(struct ehci_hcd *ehci, int portnum, int new_owner)
481 u32 __iomem *status_reg;
485 status_reg = &ehci->regs->port_status[portnum];
488 * The controller won't set the OWNER bit if the port is
489 * enabled, so this loop will sometimes require at least two
490 * iterations: one to disable the port and one to set OWNER.
492 for (try = 4; try > 0; --try) {
493 spin_lock_irq(&ehci->lock);
494 port_status = ehci_readl(ehci, status_reg);
495 if ((port_status & PORT_OWNER) == new_owner
496 || (port_status & (PORT_OWNER | PORT_CONNECT))
500 port_status ^= PORT_OWNER;
501 port_status &= ~(PORT_PE | PORT_RWC_BITS);
502 ehci_writel(ehci, port_status, status_reg);
504 spin_unlock_irq(&ehci->lock);
510 /*-------------------------------------------------------------------------*/
512 static int check_reset_complete (
513 struct ehci_hcd *ehci,
515 u32 __iomem *status_reg,
518 if (!(port_status & PORT_CONNECT))
521 /* if reset finished and it's still not enabled -- handoff */
522 if (!(port_status & PORT_PE)) {
524 /* with integrated TT, there's nobody to hand it to! */
525 if (ehci_is_TDI(ehci)) {
527 "Failed to enable port %d on root hub TT\n",
532 ehci_dbg (ehci, "port %d full speed --> companion\n",
535 // what happens if HCS_N_CC(params) == 0 ?
536 port_status |= PORT_OWNER;
537 port_status &= ~PORT_RWC_BITS;
538 ehci_writel(ehci, port_status, status_reg);
540 /* ensure 440EPX ohci controller state is operational */
541 if (ehci->has_amcc_usb23)
542 set_ohci_hcfs(ehci, 1);
544 ehci_dbg(ehci, "port %d reset complete, port enabled\n",
546 /* ensure 440EPx ohci controller state is suspended */
547 if (ehci->has_amcc_usb23)
548 set_ohci_hcfs(ehci, 0);
554 /*-------------------------------------------------------------------------*/
557 /* build "status change" packet (one or two bytes) from HC registers */
560 ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
562 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
565 int ports, i, retval = 1;
569 /* init status to no-changes */
571 ports = HCS_N_PORTS (ehci->hcs_params);
577 /* Inform the core about resumes-in-progress by returning
578 * a non-zero value even if there are no status changes.
580 status = ehci->resuming_ports;
582 /* Some boards (mostly VIA?) report bogus overcurrent indications,
583 * causing massive log spam unless we completely ignore them. It
584 * may be relevant that VIA VT8235 controllers, where PORT_POWER is
585 * always set, seem to clear PORT_OCC and PORT_CSC when writing to
586 * PORT_POWER; that's surprising, but maybe within-spec.
589 mask = PORT_CSC | PORT_PEC | PORT_OCC;
591 mask = PORT_CSC | PORT_PEC;
592 // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
594 /* no hub change reports (bit 0) for now (power, ...) */
596 /* port N changes (bit N)? */
597 spin_lock_irqsave (&ehci->lock, flags);
599 /* get per-port change detect bits */
601 ppcd = ehci_readl(ehci, &ehci->regs->status) >> 16;
603 for (i = 0; i < ports; i++) {
604 /* leverage per-port change bits feature */
605 if (ehci->has_ppcd && !(ppcd & (1 << i)))
607 temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
610 * Return status information even for ports with OWNER set.
611 * Otherwise khubd wouldn't see the disconnect event when a
612 * high-speed device is switched over to the companion
613 * controller by the user.
616 if ((temp & mask) != 0 || test_bit(i, &ehci->port_c_suspend)
617 || (ehci->reset_done[i] && time_after_eq(
618 jiffies, ehci->reset_done[i]))) {
620 buf [0] |= 1 << (i + 1);
622 buf [1] |= 1 << (i - 7);
626 /* FIXME autosuspend idle root hubs */
627 spin_unlock_irqrestore (&ehci->lock, flags);
628 return status ? retval : 0;
631 /*-------------------------------------------------------------------------*/
634 ehci_hub_descriptor (
635 struct ehci_hcd *ehci,
636 struct usb_hub_descriptor *desc
638 int ports = HCS_N_PORTS (ehci->hcs_params);
641 desc->bDescriptorType = 0x29;
642 desc->bPwrOn2PwrGood = 10; /* ehci 1.0, 2.3.9 says 20ms max */
643 desc->bHubContrCurrent = 0;
645 desc->bNbrPorts = ports;
646 temp = 1 + (ports / 8);
647 desc->bDescLength = 7 + 2 * temp;
649 /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */
650 memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
651 memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);
653 temp = 0x0008; /* per-port overcurrent reporting */
654 if (HCS_PPC (ehci->hcs_params))
655 temp |= 0x0001; /* per-port power control */
657 temp |= 0x0002; /* no power switching */
659 // re-enable when we support USB_PORT_FEAT_INDICATOR below.
660 if (HCS_INDICATOR (ehci->hcs_params))
661 temp |= 0x0080; /* per-port indicators (LEDs) */
663 desc->wHubCharacteristics = cpu_to_le16(temp);
666 /*-------------------------------------------------------------------------*/
668 static int ehci_hub_control (
676 struct ehci_hcd *ehci = hcd_to_ehci (hcd);
677 int ports = HCS_N_PORTS (ehci->hcs_params);
678 u32 __iomem *status_reg = &ehci->regs->port_status[
679 (wIndex & 0xff) - 1];
680 u32 __iomem *hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1];
681 u32 temp, temp1, status;
687 * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
688 * HCS_INDICATOR may say we can change LEDs to off/amber/green.
689 * (track current state ourselves) ... blink for diagnostics,
690 * power, "this is the one", etc. EHCI spec supports this.
693 spin_lock_irqsave (&ehci->lock, flags);
695 case ClearHubFeature:
697 case C_HUB_LOCAL_POWER:
698 case C_HUB_OVER_CURRENT:
699 /* no hub-wide feature/status flags */
705 case ClearPortFeature:
706 if (!wIndex || wIndex > ports)
709 temp = ehci_readl(ehci, status_reg);
710 temp &= ~PORT_RWC_BITS;
713 * Even if OWNER is set, so the port is owned by the
714 * companion controller, khubd needs to be able to clear
715 * the port-change status bits (especially
716 * USB_PORT_STAT_C_CONNECTION).
720 case USB_PORT_FEAT_ENABLE:
721 ehci_writel(ehci, temp & ~PORT_PE, status_reg);
723 case USB_PORT_FEAT_C_ENABLE:
724 ehci_writel(ehci, temp | PORT_PEC, status_reg);
726 case USB_PORT_FEAT_SUSPEND:
727 if (temp & PORT_RESET)
729 if (ehci->no_selective_suspend)
731 #ifdef CONFIG_USB_OTG
732 if ((hcd->self.otg_port == (wIndex + 1))
733 && hcd->self.b_hnp_enable) {
734 otg_start_hnp(hcd->phy->otg);
738 if (!(temp & PORT_SUSPEND))
740 if ((temp & PORT_PE) == 0)
743 /* clear phy low-power mode before resume */
744 if (ehci->has_hostpc) {
745 temp1 = ehci_readl(ehci, hostpc_reg);
746 ehci_writel(ehci, temp1 & ~HOSTPC_PHCD,
748 spin_unlock_irqrestore(&ehci->lock, flags);
749 msleep(5);/* wait to leave low-power mode */
750 spin_lock_irqsave(&ehci->lock, flags);
752 /* resume signaling for 20 msec */
753 temp &= ~PORT_WAKE_BITS;
754 ehci_writel(ehci, temp | PORT_RESUME, status_reg);
755 ehci->reset_done[wIndex] = jiffies
756 + msecs_to_jiffies(20);
758 case USB_PORT_FEAT_C_SUSPEND:
759 clear_bit(wIndex, &ehci->port_c_suspend);
761 case USB_PORT_FEAT_POWER:
762 if (HCS_PPC (ehci->hcs_params))
763 ehci_writel(ehci, temp & ~PORT_POWER,
766 case USB_PORT_FEAT_C_CONNECTION:
768 /* clear PORTSC bits on disconnect */
770 temp &= ~PORT_DEV_ADDR;
772 ehci_writel(ehci, temp | PORT_CSC, status_reg);
774 case USB_PORT_FEAT_C_OVER_CURRENT:
775 ehci_writel(ehci, temp | PORT_OCC, status_reg);
777 case USB_PORT_FEAT_C_RESET:
778 /* GetPortStatus clears reset */
783 ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
785 case GetHubDescriptor:
786 ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
790 /* no hub-wide feature/status flags */
792 //cpu_to_le32s ((u32 *) buf);
795 if (!wIndex || wIndex > ports)
799 temp = ehci_readl(ehci, status_reg);
803 status |= USB_PORT_STAT_C_CONNECTION << 16;
805 status |= USB_PORT_STAT_C_ENABLE << 16;
807 if ((temp & PORT_OCC) && !ignore_oc){
808 status |= USB_PORT_STAT_C_OVERCURRENT << 16;
811 * Hubs should disable port power on over-current.
812 * However, not all EHCI implementations do this
813 * automatically, even if they _do_ support per-port
814 * power switching; they're allowed to just limit the
815 * current. khubd will turn the power back on.
817 if ((temp & PORT_OC) && HCS_PPC(ehci->hcs_params)) {
819 temp & ~(PORT_RWC_BITS | PORT_POWER),
821 temp = ehci_readl(ehci, status_reg);
825 /* whoever resumes must GetPortStatus to complete it!! */
826 if (temp & PORT_RESUME) {
828 /* Remote Wakeup received? */
829 if (!ehci->reset_done[wIndex]) {
830 /* resume signaling for 20 msec */
831 ehci->reset_done[wIndex] = jiffies
832 + msecs_to_jiffies(20);
833 /* check the port again */
834 mod_timer(&ehci_to_hcd(ehci)->rh_timer,
835 ehci->reset_done[wIndex]);
838 /* resume completed? */
839 else if (time_after_eq(jiffies,
840 ehci->reset_done[wIndex])) {
841 clear_bit(wIndex, &ehci->suspended_ports);
842 set_bit(wIndex, &ehci->port_c_suspend);
843 ehci->reset_done[wIndex] = 0;
845 /* stop resume signaling */
846 temp = ehci_readl(ehci, status_reg);
848 temp & ~(PORT_RWC_BITS | PORT_RESUME),
850 clear_bit(wIndex, &ehci->resuming_ports);
851 retval = handshake(ehci, status_reg,
852 PORT_RESUME, 0, 2000 /* 2msec */);
855 "port %d resume error %d\n",
859 temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
863 /* whoever resets must GetPortStatus to complete it!! */
864 if ((temp & PORT_RESET)
865 && time_after_eq(jiffies,
866 ehci->reset_done[wIndex])) {
867 status |= USB_PORT_STAT_C_RESET << 16;
868 ehci->reset_done [wIndex] = 0;
869 clear_bit(wIndex, &ehci->resuming_ports);
871 /* force reset to complete */
872 ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
874 /* REVISIT: some hardware needs 550+ usec to clear
875 * this bit; seems too long to spin routinely...
877 retval = handshake(ehci, status_reg,
878 PORT_RESET, 0, 1000);
880 ehci_err (ehci, "port %d reset error %d\n",
885 /* see what we found out */
886 temp = check_reset_complete (ehci, wIndex, status_reg,
887 ehci_readl(ehci, status_reg));
890 if (!(temp & (PORT_RESUME|PORT_RESET))) {
891 ehci->reset_done[wIndex] = 0;
892 clear_bit(wIndex, &ehci->resuming_ports);
895 /* transfer dedicated ports to the companion hc */
896 if ((temp & PORT_CONNECT) &&
897 test_bit(wIndex, &ehci->companion_ports)) {
898 temp &= ~PORT_RWC_BITS;
900 ehci_writel(ehci, temp, status_reg);
901 ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
902 temp = ehci_readl(ehci, status_reg);
906 * Even if OWNER is set, there's no harm letting khubd
907 * see the wPortStatus values (they should all be 0 except
908 * for PORT_POWER anyway).
911 if (temp & PORT_CONNECT) {
912 status |= USB_PORT_STAT_CONNECTION;
913 // status may be from integrated TT
914 if (ehci->has_hostpc) {
915 temp1 = ehci_readl(ehci, hostpc_reg);
916 status |= ehci_port_speed(ehci, temp1);
918 status |= ehci_port_speed(ehci, temp);
921 status |= USB_PORT_STAT_ENABLE;
923 /* maybe the port was unsuspended without our knowledge */
924 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
925 status |= USB_PORT_STAT_SUSPEND;
926 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
927 clear_bit(wIndex, &ehci->suspended_ports);
928 clear_bit(wIndex, &ehci->resuming_ports);
929 ehci->reset_done[wIndex] = 0;
931 set_bit(wIndex, &ehci->port_c_suspend);
935 status |= USB_PORT_STAT_OVERCURRENT;
936 if (temp & PORT_RESET)
937 status |= USB_PORT_STAT_RESET;
938 if (temp & PORT_POWER)
939 status |= USB_PORT_STAT_POWER;
940 if (test_bit(wIndex, &ehci->port_c_suspend))
941 status |= USB_PORT_STAT_C_SUSPEND << 16;
943 #ifndef VERBOSE_DEBUG
944 if (status & ~0xffff) /* only if wPortChange is interesting */
946 dbg_port (ehci, "GetStatus", wIndex + 1, temp);
947 put_unaligned_le32(status, buf);
951 case C_HUB_LOCAL_POWER:
952 case C_HUB_OVER_CURRENT:
953 /* no hub-wide feature/status flags */
960 selector = wIndex >> 8;
962 if (unlikely(ehci->debug)) {
963 /* If the debug port is active any port
964 * feature requests should get denied */
965 if (wIndex == HCS_DEBUG_PORT(ehci->hcs_params) &&
966 (readl(&ehci->debug->control) & DBGP_ENABLED)) {
971 if (!wIndex || wIndex > ports)
974 temp = ehci_readl(ehci, status_reg);
975 if (temp & PORT_OWNER)
978 temp &= ~PORT_RWC_BITS;
980 case USB_PORT_FEAT_SUSPEND:
981 if (ehci->no_selective_suspend)
983 if ((temp & PORT_PE) == 0
984 || (temp & PORT_RESET) != 0)
987 /* After above check the port must be connected.
988 * Set appropriate bit thus could put phy into low power
989 * mode if we have hostpc feature
991 temp &= ~PORT_WKCONN_E;
992 temp |= PORT_WKDISC_E | PORT_WKOC_E;
993 ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
994 if (ehci->has_hostpc) {
995 spin_unlock_irqrestore(&ehci->lock, flags);
996 msleep(5);/* 5ms for HCD enter low pwr mode */
997 spin_lock_irqsave(&ehci->lock, flags);
998 temp1 = ehci_readl(ehci, hostpc_reg);
999 ehci_writel(ehci, temp1 | HOSTPC_PHCD,
1001 temp1 = ehci_readl(ehci, hostpc_reg);
1002 ehci_dbg(ehci, "Port%d phy low pwr mode %s\n",
1003 wIndex, (temp1 & HOSTPC_PHCD) ?
1004 "succeeded" : "failed");
1006 set_bit(wIndex, &ehci->suspended_ports);
1008 case USB_PORT_FEAT_POWER:
1009 if (HCS_PPC (ehci->hcs_params))
1010 ehci_writel(ehci, temp | PORT_POWER,
1013 case USB_PORT_FEAT_RESET:
1014 if (temp & PORT_RESUME)
1016 /* line status bits may report this as low speed,
1017 * which can be fine if this root hub has a
1018 * transaction translator built in.
1020 if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
1021 && !ehci_is_TDI(ehci)
1022 && PORT_USB11 (temp)) {
1024 "port %d low speed --> companion\n",
1028 ehci_vdbg (ehci, "port %d reset\n", wIndex + 1);
1033 * caller must wait, then call GetPortStatus
1034 * usb 2.0 spec says 50 ms resets on root
1036 ehci->reset_done [wIndex] = jiffies
1037 + msecs_to_jiffies (50);
1039 ehci_writel(ehci, temp, status_reg);
1042 /* For downstream facing ports (these): one hub port is put
1043 * into test mode according to USB2 11.24.2.13, then the hub
1044 * must be reset (which for root hub now means rmmod+modprobe,
1045 * or else system reboot). See EHCI 2.3.9 and 4.14 for info
1046 * about the EHCI-specific stuff.
1048 case USB_PORT_FEAT_TEST:
1049 if (!selector || selector > 5)
1051 spin_unlock_irqrestore(&ehci->lock, flags);
1053 spin_lock_irqsave(&ehci->lock, flags);
1055 /* Put all enabled ports into suspend */
1058 &ehci->regs->port_status[ports];
1060 temp = ehci_readl(ehci, sreg) & ~PORT_RWC_BITS;
1062 ehci_writel(ehci, temp | PORT_SUSPEND,
1066 spin_unlock_irqrestore(&ehci->lock, flags);
1068 spin_lock_irqsave(&ehci->lock, flags);
1070 temp = ehci_readl(ehci, status_reg);
1071 temp |= selector << 16;
1072 ehci_writel(ehci, temp, status_reg);
1078 ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
1083 /* "stall" on error */
1087 spin_unlock_irqrestore (&ehci->lock, flags);
1091 static void __maybe_unused ehci_relinquish_port(struct usb_hcd *hcd,
1094 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1096 if (ehci_is_TDI(ehci))
1098 set_owner(ehci, --portnum, PORT_OWNER);
1101 static int __maybe_unused ehci_port_handed_over(struct usb_hcd *hcd,
1104 struct ehci_hcd *ehci = hcd_to_ehci(hcd);
1107 if (ehci_is_TDI(ehci))
1109 reg = &ehci->regs->port_status[portnum - 1];
1110 return ehci_readl(ehci, reg) & PORT_OWNER;