]> git.karo-electronics.de Git - linux-beck.git/blob - drivers/usb/host/ehci.h
ALSA: Replace 0 with NULL in writing-an-alsa-driver.tmpl
[linux-beck.git] / drivers / usb / host / ehci.h
1 /*
2  * Copyright (c) 2001-2002 by David Brownell
3  *
4  * This program is free software; you can redistribute it and/or modify it
5  * under the terms of the GNU General Public License as published by the
6  * Free Software Foundation; either version 2 of the License, or (at your
7  * option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful, but
10  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
11  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
12  * for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software Foundation,
16  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
17  */
18
19 #ifndef __LINUX_EHCI_HCD_H
20 #define __LINUX_EHCI_HCD_H
21
22 /* definitions used for the EHCI driver */
23
24 /*
25  * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
26  * __leXX (normally) or __beXX (given EHCI_BIG_ENDIAN_DESC), depending on
27  * the host controller implementation.
28  *
29  * To facilitate the strongest possible byte-order checking from "sparse"
30  * and so on, we use __leXX unless that's not practical.
31  */
32 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
33 typedef __u32 __bitwise __hc32;
34 typedef __u16 __bitwise __hc16;
35 #else
36 #define __hc32  __le32
37 #define __hc16  __le16
38 #endif
39
40 /* statistics can be kept for tuning/monitoring */
41 struct ehci_stats {
42         /* irq usage */
43         unsigned long           normal;
44         unsigned long           error;
45         unsigned long           iaa;
46         unsigned long           lost_iaa;
47
48         /* termination of urbs from core */
49         unsigned long           complete;
50         unsigned long           unlink;
51 };
52
53 /* ehci_hcd->lock guards shared data against other CPUs:
54  *   ehci_hcd:  async, unlink, periodic (and shadow), ...
55  *   usb_host_endpoint: hcpriv
56  *   ehci_qh:   qh_next, qtd_list
57  *   ehci_qtd:  qtd_list
58  *
59  * Also, hold this lock when talking to HC registers or
60  * when updating hw_* fields in shared qh/qtd/... structures.
61  */
62
63 #define EHCI_MAX_ROOT_PORTS     15              /* see HCS_N_PORTS */
64
65 /*
66  * ehci_rh_state values of EHCI_RH_RUNNING or above mean that the
67  * controller may be doing DMA.  Lower values mean there's no DMA.
68  */
69 enum ehci_rh_state {
70         EHCI_RH_HALTED,
71         EHCI_RH_SUSPENDED,
72         EHCI_RH_RUNNING,
73         EHCI_RH_STOPPING
74 };
75
76 /*
77  * Timer events, ordered by increasing delay length.
78  * Always update event_delays_ns[] and event_handlers[] (defined in
79  * ehci-timer.c) in parallel with this list.
80  */
81 enum ehci_hrtimer_event {
82         EHCI_HRTIMER_POLL_ASS,          /* Poll for async schedule off */
83         EHCI_HRTIMER_POLL_PSS,          /* Poll for periodic schedule off */
84         EHCI_HRTIMER_POLL_DEAD,         /* Wait for dead controller to stop */
85         EHCI_HRTIMER_UNLINK_INTR,       /* Wait for interrupt QH unlink */
86         EHCI_HRTIMER_FREE_ITDS,         /* Wait for unused iTDs and siTDs */
87         EHCI_HRTIMER_ASYNC_UNLINKS,     /* Unlink empty async QHs */
88         EHCI_HRTIMER_IAA_WATCHDOG,      /* Handle lost IAA interrupts */
89         EHCI_HRTIMER_DISABLE_PERIODIC,  /* Wait to disable periodic sched */
90         EHCI_HRTIMER_DISABLE_ASYNC,     /* Wait to disable async sched */
91         EHCI_HRTIMER_IO_WATCHDOG,       /* Check for missing IRQs */
92         EHCI_HRTIMER_NUM_EVENTS         /* Must come last */
93 };
94 #define EHCI_HRTIMER_NO_EVENT   99
95
96 struct ehci_hcd {                       /* one per controller */
97         /* timing support */
98         enum ehci_hrtimer_event next_hrtimer_event;
99         unsigned                enabled_hrtimer_events;
100         ktime_t                 hr_timeouts[EHCI_HRTIMER_NUM_EVENTS];
101         struct hrtimer          hrtimer;
102
103         int                     PSS_poll_count;
104         int                     ASS_poll_count;
105         int                     died_poll_count;
106
107         /* glue to PCI and HCD framework */
108         struct ehci_caps __iomem *caps;
109         struct ehci_regs __iomem *regs;
110         struct ehci_dbg_port __iomem *debug;
111
112         __u32                   hcs_params;     /* cached register copy */
113         spinlock_t              lock;
114         enum ehci_rh_state      rh_state;
115
116         /* general schedule support */
117         bool                    scanning:1;
118         bool                    need_rescan:1;
119         bool                    intr_unlinking:1;
120         bool                    async_unlinking:1;
121         bool                    shutdown:1;
122         struct ehci_qh          *qh_scan_next;
123
124         /* async schedule support */
125         struct ehci_qh          *async;
126         struct ehci_qh          *dummy;         /* For AMD quirk use */
127         struct ehci_qh          *async_unlink;
128         struct ehci_qh          *async_unlink_last;
129         struct ehci_qh          *async_iaa;
130         unsigned                async_unlink_cycle;
131         unsigned                async_count;    /* async activity count */
132
133         /* periodic schedule support */
134 #define DEFAULT_I_TDPS          1024            /* some HCs can do less */
135         unsigned                periodic_size;
136         __hc32                  *periodic;      /* hw periodic table */
137         dma_addr_t              periodic_dma;
138         struct list_head        intr_qh_list;
139         unsigned                i_thresh;       /* uframes HC might cache */
140
141         union ehci_shadow       *pshadow;       /* mirror hw periodic table */
142         struct ehci_qh          *intr_unlink;
143         struct ehci_qh          *intr_unlink_last;
144         unsigned                intr_unlink_cycle;
145         unsigned                now_frame;      /* frame from HC hardware */
146         unsigned                last_iso_frame; /* last frame scanned for iso */
147         unsigned                intr_count;     /* intr activity count */
148         unsigned                isoc_count;     /* isoc activity count */
149         unsigned                periodic_count; /* periodic activity count */
150         unsigned                uframe_periodic_max; /* max periodic time per uframe */
151
152
153         /* list of itds & sitds completed while now_frame was still active */
154         struct list_head        cached_itd_list;
155         struct ehci_itd         *last_itd_to_free;
156         struct list_head        cached_sitd_list;
157         struct ehci_sitd        *last_sitd_to_free;
158
159         /* per root hub port */
160         unsigned long           reset_done [EHCI_MAX_ROOT_PORTS];
161
162         /* bit vectors (one bit per port) */
163         unsigned long           bus_suspended;          /* which ports were
164                         already suspended at the start of a bus suspend */
165         unsigned long           companion_ports;        /* which ports are
166                         dedicated to the companion controller */
167         unsigned long           owned_ports;            /* which ports are
168                         owned by the companion during a bus suspend */
169         unsigned long           port_c_suspend;         /* which ports have
170                         the change-suspend feature turned on */
171         unsigned long           suspended_ports;        /* which ports are
172                         suspended */
173         unsigned long           resuming_ports;         /* which ports have
174                         started to resume */
175
176         /* per-HC memory pools (could be per-bus, but ...) */
177         struct dma_pool         *qh_pool;       /* qh per active urb */
178         struct dma_pool         *qtd_pool;      /* one or more per qh */
179         struct dma_pool         *itd_pool;      /* itd per iso urb */
180         struct dma_pool         *sitd_pool;     /* sitd per split iso urb */
181
182         unsigned                random_frame;
183         unsigned long           next_statechange;
184         ktime_t                 last_periodic_enable;
185         u32                     command;
186
187         /* SILICON QUIRKS */
188         unsigned                no_selective_suspend:1;
189         unsigned                has_fsl_port_bug:1; /* FreeScale */
190         unsigned                big_endian_mmio:1;
191         unsigned                big_endian_desc:1;
192         unsigned                big_endian_capbase:1;
193         unsigned                has_amcc_usb23:1;
194         unsigned                need_io_watchdog:1;
195         unsigned                amd_pll_fix:1;
196         unsigned                use_dummy_qh:1; /* AMD Frame List table quirk*/
197         unsigned                has_synopsys_hc_bug:1; /* Synopsys HC */
198         unsigned                frame_index_bug:1; /* MosChip (AKA NetMos) */
199
200         /* required for usb32 quirk */
201         #define OHCI_CTRL_HCFS          (3 << 6)
202         #define OHCI_USB_OPER           (2 << 6)
203         #define OHCI_USB_SUSPEND        (3 << 6)
204
205         #define OHCI_HCCTRL_OFFSET      0x4
206         #define OHCI_HCCTRL_LEN         0x4
207         __hc32                  *ohci_hcctrl_reg;
208         unsigned                has_hostpc:1;
209         unsigned                has_ppcd:1; /* support per-port change bits */
210         u8                      sbrn;           /* packed release number */
211
212         /* irq statistics */
213 #ifdef EHCI_STATS
214         struct ehci_stats       stats;
215 #       define COUNT(x) do { (x)++; } while (0)
216 #else
217 #       define COUNT(x) do {} while (0)
218 #endif
219
220         /* debug files */
221 #ifdef DEBUG
222         struct dentry           *debug_dir;
223 #endif
224 };
225
226 /* convert between an HCD pointer and the corresponding EHCI_HCD */
227 static inline struct ehci_hcd *hcd_to_ehci (struct usb_hcd *hcd)
228 {
229         return (struct ehci_hcd *) (hcd->hcd_priv);
230 }
231 static inline struct usb_hcd *ehci_to_hcd (struct ehci_hcd *ehci)
232 {
233         return container_of ((void *) ehci, struct usb_hcd, hcd_priv);
234 }
235
236 /*-------------------------------------------------------------------------*/
237
238 #include <linux/usb/ehci_def.h>
239
240 /*-------------------------------------------------------------------------*/
241
242 #define QTD_NEXT(ehci, dma)     cpu_to_hc32(ehci, (u32)dma)
243
244 /*
245  * EHCI Specification 0.95 Section 3.5
246  * QTD: describe data transfer components (buffer, direction, ...)
247  * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
248  *
249  * These are associated only with "QH" (Queue Head) structures,
250  * used with control, bulk, and interrupt transfers.
251  */
252 struct ehci_qtd {
253         /* first part defined by EHCI spec */
254         __hc32                  hw_next;        /* see EHCI 3.5.1 */
255         __hc32                  hw_alt_next;    /* see EHCI 3.5.2 */
256         __hc32                  hw_token;       /* see EHCI 3.5.3 */
257 #define QTD_TOGGLE      (1 << 31)       /* data toggle */
258 #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
259 #define QTD_IOC         (1 << 15)       /* interrupt on complete */
260 #define QTD_CERR(tok)   (((tok)>>10) & 0x3)
261 #define QTD_PID(tok)    (((tok)>>8) & 0x3)
262 #define QTD_STS_ACTIVE  (1 << 7)        /* HC may execute this */
263 #define QTD_STS_HALT    (1 << 6)        /* halted on error */
264 #define QTD_STS_DBE     (1 << 5)        /* data buffer error (in HC) */
265 #define QTD_STS_BABBLE  (1 << 4)        /* device was babbling (qtd halted) */
266 #define QTD_STS_XACT    (1 << 3)        /* device gave illegal response */
267 #define QTD_STS_MMF     (1 << 2)        /* incomplete split transaction */
268 #define QTD_STS_STS     (1 << 1)        /* split transaction state */
269 #define QTD_STS_PING    (1 << 0)        /* issue PING? */
270
271 #define ACTIVE_BIT(ehci)        cpu_to_hc32(ehci, QTD_STS_ACTIVE)
272 #define HALT_BIT(ehci)          cpu_to_hc32(ehci, QTD_STS_HALT)
273 #define STATUS_BIT(ehci)        cpu_to_hc32(ehci, QTD_STS_STS)
274
275         __hc32                  hw_buf [5];        /* see EHCI 3.5.4 */
276         __hc32                  hw_buf_hi [5];        /* Appendix B */
277
278         /* the rest is HCD-private */
279         dma_addr_t              qtd_dma;                /* qtd address */
280         struct list_head        qtd_list;               /* sw qtd list */
281         struct urb              *urb;                   /* qtd's urb */
282         size_t                  length;                 /* length of buffer */
283 } __attribute__ ((aligned (32)));
284
285 /* mask NakCnt+T in qh->hw_alt_next */
286 #define QTD_MASK(ehci)  cpu_to_hc32 (ehci, ~0x1f)
287
288 #define IS_SHORT_READ(token) (QTD_LENGTH (token) != 0 && QTD_PID (token) == 1)
289
290 /*-------------------------------------------------------------------------*/
291
292 /* type tag from {qh,itd,sitd,fstn}->hw_next */
293 #define Q_NEXT_TYPE(ehci,dma)   ((dma) & cpu_to_hc32(ehci, 3 << 1))
294
295 /*
296  * Now the following defines are not converted using the
297  * cpu_to_le32() macro anymore, since we have to support
298  * "dynamic" switching between be and le support, so that the driver
299  * can be used on one system with SoC EHCI controller using big-endian
300  * descriptors as well as a normal little-endian PCI EHCI controller.
301  */
302 /* values for that type tag */
303 #define Q_TYPE_ITD      (0 << 1)
304 #define Q_TYPE_QH       (1 << 1)
305 #define Q_TYPE_SITD     (2 << 1)
306 #define Q_TYPE_FSTN     (3 << 1)
307
308 /* next async queue entry, or pointer to interrupt/periodic QH */
309 #define QH_NEXT(ehci,dma)       (cpu_to_hc32(ehci, (((u32)dma)&~0x01f)|Q_TYPE_QH))
310
311 /* for periodic/async schedules and qtd lists, mark end of list */
312 #define EHCI_LIST_END(ehci)     cpu_to_hc32(ehci, 1) /* "null pointer" to hw */
313
314 /*
315  * Entries in periodic shadow table are pointers to one of four kinds
316  * of data structure.  That's dictated by the hardware; a type tag is
317  * encoded in the low bits of the hardware's periodic schedule.  Use
318  * Q_NEXT_TYPE to get the tag.
319  *
320  * For entries in the async schedule, the type tag always says "qh".
321  */
322 union ehci_shadow {
323         struct ehci_qh          *qh;            /* Q_TYPE_QH */
324         struct ehci_itd         *itd;           /* Q_TYPE_ITD */
325         struct ehci_sitd        *sitd;          /* Q_TYPE_SITD */
326         struct ehci_fstn        *fstn;          /* Q_TYPE_FSTN */
327         __hc32                  *hw_next;       /* (all types) */
328         void                    *ptr;
329 };
330
331 /*-------------------------------------------------------------------------*/
332
333 /*
334  * EHCI Specification 0.95 Section 3.6
335  * QH: describes control/bulk/interrupt endpoints
336  * See Fig 3-7 "Queue Head Structure Layout".
337  *
338  * These appear in both the async and (for interrupt) periodic schedules.
339  */
340
341 /* first part defined by EHCI spec */
342 struct ehci_qh_hw {
343         __hc32                  hw_next;        /* see EHCI 3.6.1 */
344         __hc32                  hw_info1;       /* see EHCI 3.6.2 */
345 #define QH_CONTROL_EP   (1 << 27)       /* FS/LS control endpoint */
346 #define QH_HEAD         (1 << 15)       /* Head of async reclamation list */
347 #define QH_TOGGLE_CTL   (1 << 14)       /* Data toggle control */
348 #define QH_HIGH_SPEED   (2 << 12)       /* Endpoint speed */
349 #define QH_LOW_SPEED    (1 << 12)
350 #define QH_FULL_SPEED   (0 << 12)
351 #define QH_INACTIVATE   (1 << 7)        /* Inactivate on next transaction */
352         __hc32                  hw_info2;        /* see EHCI 3.6.2 */
353 #define QH_SMASK        0x000000ff
354 #define QH_CMASK        0x0000ff00
355 #define QH_HUBADDR      0x007f0000
356 #define QH_HUBPORT      0x3f800000
357 #define QH_MULT         0xc0000000
358         __hc32                  hw_current;     /* qtd list - see EHCI 3.6.4 */
359
360         /* qtd overlay (hardware parts of a struct ehci_qtd) */
361         __hc32                  hw_qtd_next;
362         __hc32                  hw_alt_next;
363         __hc32                  hw_token;
364         __hc32                  hw_buf [5];
365         __hc32                  hw_buf_hi [5];
366 } __attribute__ ((aligned(32)));
367
368 struct ehci_qh {
369         struct ehci_qh_hw       *hw;            /* Must come first */
370         /* the rest is HCD-private */
371         dma_addr_t              qh_dma;         /* address of qh */
372         union ehci_shadow       qh_next;        /* ptr to qh; or periodic */
373         struct list_head        qtd_list;       /* sw qtd list */
374         struct list_head        intr_node;      /* list of intr QHs */
375         struct ehci_qtd         *dummy;
376         struct ehci_qh          *unlink_next;   /* next on unlink list */
377
378         unsigned                unlink_cycle;
379
380         u8                      needs_rescan;   /* Dequeue during giveback */
381         u8                      qh_state;
382 #define QH_STATE_LINKED         1               /* HC sees this */
383 #define QH_STATE_UNLINK         2               /* HC may still see this */
384 #define QH_STATE_IDLE           3               /* HC doesn't see this */
385 #define QH_STATE_UNLINK_WAIT    4               /* LINKED and on unlink q */
386 #define QH_STATE_COMPLETING     5               /* don't touch token.HALT */
387
388         u8                      xacterrs;       /* XactErr retry counter */
389 #define QH_XACTERR_MAX          32              /* XactErr retry limit */
390
391         /* periodic schedule info */
392         u8                      usecs;          /* intr bandwidth */
393         u8                      gap_uf;         /* uframes split/csplit gap */
394         u8                      c_usecs;        /* ... split completion bw */
395         u16                     tt_usecs;       /* tt downstream bandwidth */
396         unsigned short          period;         /* polling interval */
397         unsigned short          start;          /* where polling starts */
398 #define NO_FRAME ((unsigned short)~0)                   /* pick new start */
399
400         struct usb_device       *dev;           /* access to TT */
401         unsigned                is_out:1;       /* bulk or intr OUT */
402         unsigned                clearing_tt:1;  /* Clear-TT-Buf in progress */
403 };
404
405 /*-------------------------------------------------------------------------*/
406
407 /* description of one iso transaction (up to 3 KB data if highspeed) */
408 struct ehci_iso_packet {
409         /* These will be copied to iTD when scheduling */
410         u64                     bufp;           /* itd->hw_bufp{,_hi}[pg] |= */
411         __hc32                  transaction;    /* itd->hw_transaction[i] |= */
412         u8                      cross;          /* buf crosses pages */
413         /* for full speed OUT splits */
414         u32                     buf1;
415 };
416
417 /* temporary schedule data for packets from iso urbs (both speeds)
418  * each packet is one logical usb transaction to the device (not TT),
419  * beginning at stream->next_uframe
420  */
421 struct ehci_iso_sched {
422         struct list_head        td_list;
423         unsigned                span;
424         struct ehci_iso_packet  packet [0];
425 };
426
427 /*
428  * ehci_iso_stream - groups all (s)itds for this endpoint.
429  * acts like a qh would, if EHCI had them for ISO.
430  */
431 struct ehci_iso_stream {
432         /* first field matches ehci_hq, but is NULL */
433         struct ehci_qh_hw       *hw;
434
435         u8                      bEndpointAddress;
436         u8                      highspeed;
437         struct list_head        td_list;        /* queued itds/sitds */
438         struct list_head        free_list;      /* list of unused itds/sitds */
439         struct usb_device       *udev;
440         struct usb_host_endpoint *ep;
441
442         /* output of (re)scheduling */
443         int                     next_uframe;
444         __hc32                  splits;
445
446         /* the rest is derived from the endpoint descriptor,
447          * trusting urb->interval == f(epdesc->bInterval) and
448          * including the extra info for hw_bufp[0..2]
449          */
450         u8                      usecs, c_usecs;
451         u16                     interval;
452         u16                     tt_usecs;
453         u16                     maxp;
454         u16                     raw_mask;
455         unsigned                bandwidth;
456
457         /* This is used to initialize iTD's hw_bufp fields */
458         __hc32                  buf0;
459         __hc32                  buf1;
460         __hc32                  buf2;
461
462         /* this is used to initialize sITD's tt info */
463         __hc32                  address;
464 };
465
466 /*-------------------------------------------------------------------------*/
467
468 /*
469  * EHCI Specification 0.95 Section 3.3
470  * Fig 3-4 "Isochronous Transaction Descriptor (iTD)"
471  *
472  * Schedule records for high speed iso xfers
473  */
474 struct ehci_itd {
475         /* first part defined by EHCI spec */
476         __hc32                  hw_next;           /* see EHCI 3.3.1 */
477         __hc32                  hw_transaction [8]; /* see EHCI 3.3.2 */
478 #define EHCI_ISOC_ACTIVE        (1<<31)        /* activate transfer this slot */
479 #define EHCI_ISOC_BUF_ERR       (1<<30)        /* Data buffer error */
480 #define EHCI_ISOC_BABBLE        (1<<29)        /* babble detected */
481 #define EHCI_ISOC_XACTERR       (1<<28)        /* XactErr - transaction error */
482 #define EHCI_ITD_LENGTH(tok)    (((tok)>>16) & 0x0fff)
483 #define EHCI_ITD_IOC            (1 << 15)       /* interrupt on complete */
484
485 #define ITD_ACTIVE(ehci)        cpu_to_hc32(ehci, EHCI_ISOC_ACTIVE)
486
487         __hc32                  hw_bufp [7];    /* see EHCI 3.3.3 */
488         __hc32                  hw_bufp_hi [7]; /* Appendix B */
489
490         /* the rest is HCD-private */
491         dma_addr_t              itd_dma;        /* for this itd */
492         union ehci_shadow       itd_next;       /* ptr to periodic q entry */
493
494         struct urb              *urb;
495         struct ehci_iso_stream  *stream;        /* endpoint's queue */
496         struct list_head        itd_list;       /* list of stream's itds */
497
498         /* any/all hw_transactions here may be used by that urb */
499         unsigned                frame;          /* where scheduled */
500         unsigned                pg;
501         unsigned                index[8];       /* in urb->iso_frame_desc */
502 } __attribute__ ((aligned (32)));
503
504 /*-------------------------------------------------------------------------*/
505
506 /*
507  * EHCI Specification 0.95 Section 3.4
508  * siTD, aka split-transaction isochronous Transfer Descriptor
509  *       ... describe full speed iso xfers through TT in hubs
510  * see Figure 3-5 "Split-transaction Isochronous Transaction Descriptor (siTD)
511  */
512 struct ehci_sitd {
513         /* first part defined by EHCI spec */
514         __hc32                  hw_next;
515 /* uses bit field macros above - see EHCI 0.95 Table 3-8 */
516         __hc32                  hw_fullspeed_ep;        /* EHCI table 3-9 */
517         __hc32                  hw_uframe;              /* EHCI table 3-10 */
518         __hc32                  hw_results;             /* EHCI table 3-11 */
519 #define SITD_IOC        (1 << 31)       /* interrupt on completion */
520 #define SITD_PAGE       (1 << 30)       /* buffer 0/1 */
521 #define SITD_LENGTH(x)  (0x3ff & ((x)>>16))
522 #define SITD_STS_ACTIVE (1 << 7)        /* HC may execute this */
523 #define SITD_STS_ERR    (1 << 6)        /* error from TT */
524 #define SITD_STS_DBE    (1 << 5)        /* data buffer error (in HC) */
525 #define SITD_STS_BABBLE (1 << 4)        /* device was babbling */
526 #define SITD_STS_XACT   (1 << 3)        /* illegal IN response */
527 #define SITD_STS_MMF    (1 << 2)        /* incomplete split transaction */
528 #define SITD_STS_STS    (1 << 1)        /* split transaction state */
529
530 #define SITD_ACTIVE(ehci)       cpu_to_hc32(ehci, SITD_STS_ACTIVE)
531
532         __hc32                  hw_buf [2];             /* EHCI table 3-12 */
533         __hc32                  hw_backpointer;         /* EHCI table 3-13 */
534         __hc32                  hw_buf_hi [2];          /* Appendix B */
535
536         /* the rest is HCD-private */
537         dma_addr_t              sitd_dma;
538         union ehci_shadow       sitd_next;      /* ptr to periodic q entry */
539
540         struct urb              *urb;
541         struct ehci_iso_stream  *stream;        /* endpoint's queue */
542         struct list_head        sitd_list;      /* list of stream's sitds */
543         unsigned                frame;
544         unsigned                index;
545 } __attribute__ ((aligned (32)));
546
547 /*-------------------------------------------------------------------------*/
548
549 /*
550  * EHCI Specification 0.96 Section 3.7
551  * Periodic Frame Span Traversal Node (FSTN)
552  *
553  * Manages split interrupt transactions (using TT) that span frame boundaries
554  * into uframes 0/1; see 4.12.2.2.  In those uframes, a "save place" FSTN
555  * makes the HC jump (back) to a QH to scan for fs/ls QH completions until
556  * it hits a "restore" FSTN; then it returns to finish other uframe 0/1 work.
557  */
558 struct ehci_fstn {
559         __hc32                  hw_next;        /* any periodic q entry */
560         __hc32                  hw_prev;        /* qh or EHCI_LIST_END */
561
562         /* the rest is HCD-private */
563         dma_addr_t              fstn_dma;
564         union ehci_shadow       fstn_next;      /* ptr to periodic q entry */
565 } __attribute__ ((aligned (32)));
566
567 /*-------------------------------------------------------------------------*/
568
569 /* Prepare the PORTSC wakeup flags during controller suspend/resume */
570
571 #define ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup)      \
572                 ehci_adjust_port_wakeup_flags(ehci, true, do_wakeup);
573
574 #define ehci_prepare_ports_for_controller_resume(ehci)                  \
575                 ehci_adjust_port_wakeup_flags(ehci, false, false);
576
577 /*-------------------------------------------------------------------------*/
578
579 #ifdef CONFIG_USB_EHCI_ROOT_HUB_TT
580
581 /*
582  * Some EHCI controllers have a Transaction Translator built into the
583  * root hub. This is a non-standard feature.  Each controller will need
584  * to add code to the following inline functions, and call them as
585  * needed (mostly in root hub code).
586  */
587
588 #define ehci_is_TDI(e)                  (ehci_to_hcd(e)->has_tt)
589
590 /* Returns the speed of a device attached to a port on the root hub. */
591 static inline unsigned int
592 ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
593 {
594         if (ehci_is_TDI(ehci)) {
595                 switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
596                 case 0:
597                         return 0;
598                 case 1:
599                         return USB_PORT_STAT_LOW_SPEED;
600                 case 2:
601                 default:
602                         return USB_PORT_STAT_HIGH_SPEED;
603                 }
604         }
605         return USB_PORT_STAT_HIGH_SPEED;
606 }
607
608 #else
609
610 #define ehci_is_TDI(e)                  (0)
611
612 #define ehci_port_speed(ehci, portsc)   USB_PORT_STAT_HIGH_SPEED
613 #endif
614
615 /*-------------------------------------------------------------------------*/
616
617 #ifdef CONFIG_PPC_83xx
618 /* Some Freescale processors have an erratum in which the TT
619  * port number in the queue head was 0..N-1 instead of 1..N.
620  */
621 #define ehci_has_fsl_portno_bug(e)              ((e)->has_fsl_port_bug)
622 #else
623 #define ehci_has_fsl_portno_bug(e)              (0)
624 #endif
625
626 /*
627  * While most USB host controllers implement their registers in
628  * little-endian format, a minority (celleb companion chip) implement
629  * them in big endian format.
630  *
631  * This attempts to support either format at compile time without a
632  * runtime penalty, or both formats with the additional overhead
633  * of checking a flag bit.
634  *
635  * ehci_big_endian_capbase is a special quirk for controllers that
636  * implement the HC capability registers as separate registers and not
637  * as fields of a 32-bit register.
638  */
639
640 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
641 #define ehci_big_endian_mmio(e)         ((e)->big_endian_mmio)
642 #define ehci_big_endian_capbase(e)      ((e)->big_endian_capbase)
643 #else
644 #define ehci_big_endian_mmio(e)         0
645 #define ehci_big_endian_capbase(e)      0
646 #endif
647
648 /*
649  * Big-endian read/write functions are arch-specific.
650  * Other arches can be added if/when they're needed.
651  */
652 #if defined(CONFIG_ARM) && defined(CONFIG_ARCH_IXP4XX)
653 #define readl_be(addr)          __raw_readl((__force unsigned *)addr)
654 #define writel_be(val, addr)    __raw_writel(val, (__force unsigned *)addr)
655 #endif
656
657 static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
658                 __u32 __iomem * regs)
659 {
660 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
661         return ehci_big_endian_mmio(ehci) ?
662                 readl_be(regs) :
663                 readl(regs);
664 #else
665         return readl(regs);
666 #endif
667 }
668
669 static inline void ehci_writel(const struct ehci_hcd *ehci,
670                 const unsigned int val, __u32 __iomem *regs)
671 {
672 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
673         ehci_big_endian_mmio(ehci) ?
674                 writel_be(val, regs) :
675                 writel(val, regs);
676 #else
677         writel(val, regs);
678 #endif
679 }
680
681 /*
682  * On certain ppc-44x SoC there is a HW issue, that could only worked around with
683  * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
684  * Other common bits are dependent on has_amcc_usb23 quirk flag.
685  */
686 #ifdef CONFIG_44x
687 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
688 {
689         u32 hc_control;
690
691         hc_control = (readl_be(ehci->ohci_hcctrl_reg) & ~OHCI_CTRL_HCFS);
692         if (operational)
693                 hc_control |= OHCI_USB_OPER;
694         else
695                 hc_control |= OHCI_USB_SUSPEND;
696
697         writel_be(hc_control, ehci->ohci_hcctrl_reg);
698         (void) readl_be(ehci->ohci_hcctrl_reg);
699 }
700 #else
701 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
702 { }
703 #endif
704
705 /*-------------------------------------------------------------------------*/
706
707 /*
708  * The AMCC 440EPx not only implements its EHCI registers in big-endian
709  * format, but also its DMA data structures (descriptors).
710  *
711  * EHCI controllers accessed through PCI work normally (little-endian
712  * everywhere), so we won't bother supporting a BE-only mode for now.
713  */
714 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
715 #define ehci_big_endian_desc(e)         ((e)->big_endian_desc)
716
717 /* cpu to ehci */
718 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
719 {
720         return ehci_big_endian_desc(ehci)
721                 ? (__force __hc32)cpu_to_be32(x)
722                 : (__force __hc32)cpu_to_le32(x);
723 }
724
725 /* ehci to cpu */
726 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
727 {
728         return ehci_big_endian_desc(ehci)
729                 ? be32_to_cpu((__force __be32)x)
730                 : le32_to_cpu((__force __le32)x);
731 }
732
733 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
734 {
735         return ehci_big_endian_desc(ehci)
736                 ? be32_to_cpup((__force __be32 *)x)
737                 : le32_to_cpup((__force __le32 *)x);
738 }
739
740 #else
741
742 /* cpu to ehci */
743 static inline __hc32 cpu_to_hc32 (const struct ehci_hcd *ehci, const u32 x)
744 {
745         return cpu_to_le32(x);
746 }
747
748 /* ehci to cpu */
749 static inline u32 hc32_to_cpu (const struct ehci_hcd *ehci, const __hc32 x)
750 {
751         return le32_to_cpu(x);
752 }
753
754 static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x)
755 {
756         return le32_to_cpup(x);
757 }
758
759 #endif
760
761 /*-------------------------------------------------------------------------*/
762
763 #define ehci_dbg(ehci, fmt, args...) \
764         dev_dbg(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
765 #define ehci_err(ehci, fmt, args...) \
766         dev_err(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
767 #define ehci_info(ehci, fmt, args...) \
768         dev_info(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
769 #define ehci_warn(ehci, fmt, args...) \
770         dev_warn(ehci_to_hcd(ehci)->self.controller , fmt , ## args)
771
772 #ifdef VERBOSE_DEBUG
773 #       define ehci_vdbg ehci_dbg
774 #else
775         static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {}
776 #endif
777
778 #ifndef DEBUG
779 #define STUB_DEBUG_FILES
780 #endif  /* DEBUG */
781
782 /*-------------------------------------------------------------------------*/
783
784 /* Declarations of things exported for use by ehci platform drivers */
785
786 struct ehci_driver_overrides {
787         size_t          extra_priv_size;
788         int             (*reset)(struct usb_hcd *hcd);
789 };
790
791 extern void     ehci_init_driver(struct hc_driver *drv,
792                                 const struct ehci_driver_overrides *over);
793 extern int      ehci_setup(struct usb_hcd *hcd);
794
795 #ifdef CONFIG_PM
796 extern int      ehci_suspend(struct usb_hcd *hcd, bool do_wakeup);
797 extern int      ehci_resume(struct usb_hcd *hcd, bool hibernated);
798 #endif  /* CONFIG_PM */
799
800 #endif /* __LINUX_EHCI_HCD_H */