2 * xHCI host controller driver for R-Car SoCs
4 * Copyright (C) 2014 Renesas Electronics Corporation
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * version 2 as published by the Free Software Foundation.
11 #include <linux/firmware.h>
12 #include <linux/module.h>
13 #include <linux/platform_device.h>
15 #include <linux/usb/phy.h>
18 #include "xhci-plat.h"
19 #include "xhci-rcar.h"
22 * - The V3 firmware is for r8a7796 (with good performance).
23 * - The V2 firmware can be used on both r8a7795 (es1.x) and r8a7796.
24 * - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes
25 * performance degradation. So, this driver continues to use the V1 if R-Car
27 * - The V1 firmware is impossible to use on R-Car Gen3.
29 MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1);
30 MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2);
31 MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3);
33 /*** Register Offset ***/
34 #define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */
35 #define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */
36 #define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */
38 #define RCAR_USB3_LCLK 0xa44 /* LCLK Select */
39 #define RCAR_USB3_CONF1 0xa48 /* USB3.0 Configuration1 */
40 #define RCAR_USB3_CONF2 0xa5c /* USB3.0 Configuration2 */
41 #define RCAR_USB3_CONF3 0xaa8 /* USB3.0 Configuration3 */
42 #define RCAR_USB3_RX_POL 0xab0 /* USB3.0 RX Polarity */
43 #define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */
45 /*** Register Settings ***/
46 /* Interrupt Enable */
47 #define RCAR_USB3_INT_XHC_ENA 0x00000001
48 #define RCAR_USB3_INT_PME_ENA 0x00000002
49 #define RCAR_USB3_INT_HSE_ENA 0x00000004
50 #define RCAR_USB3_INT_ENA_VAL (RCAR_USB3_INT_XHC_ENA | \
51 RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA)
53 /* FW Download Control & Status */
54 #define RCAR_USB3_DL_CTRL_ENABLE 0x00000001
55 #define RCAR_USB3_DL_CTRL_FW_SUCCESS 0x00000010
56 #define RCAR_USB3_DL_CTRL_FW_SET_DATA0 0x00000100
59 #define RCAR_USB3_LCLK_ENA_VAL 0x01030001
61 /* USB3.0 Configuration */
62 #define RCAR_USB3_CONF1_VAL 0x00030204
63 #define RCAR_USB3_CONF2_VAL 0x00030300
64 #define RCAR_USB3_CONF3_VAL 0x13802007
67 #define RCAR_USB3_RX_POL_VAL BIT(21)
68 #define RCAR_USB3_TX_POL_VAL BIT(4)
70 static void xhci_rcar_start_gen2(struct usb_hcd *hcd)
73 writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK);
74 /* USB3.0 Configuration */
75 writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1);
76 writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2);
77 writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3);
79 writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL);
80 writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL);
83 static int xhci_rcar_is_gen2(struct device *dev)
85 struct device_node *node = dev->of_node;
87 return of_device_is_compatible(node, "renesas,xhci-r8a7790") ||
88 of_device_is_compatible(node, "renesas,xhci-r8a7791") ||
89 of_device_is_compatible(node, "renesas,xhci-r8a7793") ||
90 of_device_is_compatible(node, "renensas,rcar-gen2-xhci");
93 static int xhci_rcar_is_gen3(struct device *dev)
95 struct device_node *node = dev->of_node;
97 return of_device_is_compatible(node, "renesas,xhci-r8a7795") ||
98 of_device_is_compatible(node, "renesas,xhci-r8a7796") ||
99 of_device_is_compatible(node, "renesas,rcar-gen3-xhci");
102 void xhci_rcar_start(struct usb_hcd *hcd)
106 if (hcd->regs != NULL) {
107 /* Interrupt Enable */
108 temp = readl(hcd->regs + RCAR_USB3_INT_ENA);
109 temp |= RCAR_USB3_INT_ENA_VAL;
110 writel(temp, hcd->regs + RCAR_USB3_INT_ENA);
111 if (xhci_rcar_is_gen2(hcd->self.controller))
112 xhci_rcar_start_gen2(hcd);
116 static int xhci_rcar_download_firmware(struct usb_hcd *hcd)
118 struct device *dev = hcd->self.controller;
119 void __iomem *regs = hcd->regs;
120 struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
121 const struct firmware *fw;
122 int retval, index, j, time;
126 /* request R-Car USB3.0 firmware */
127 retval = request_firmware(&fw, priv->firmware_name, dev);
131 /* download R-Car USB3.0 firmware */
132 temp = readl(regs + RCAR_USB3_DL_CTRL);
133 temp |= RCAR_USB3_DL_CTRL_ENABLE;
134 writel(temp, regs + RCAR_USB3_DL_CTRL);
136 for (index = 0; index < fw->size; index += 4) {
137 /* to avoid reading beyond the end of the buffer */
138 for (data = 0, j = 3; j >= 0; j--) {
139 if ((j + index) < fw->size)
140 data |= fw->data[index + j] << (8 * j);
142 writel(data, regs + RCAR_USB3_FW_DATA0);
143 temp = readl(regs + RCAR_USB3_DL_CTRL);
144 temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0;
145 writel(temp, regs + RCAR_USB3_DL_CTRL);
147 for (time = 0; time < timeout; time++) {
148 val = readl(regs + RCAR_USB3_DL_CTRL);
149 if ((val & RCAR_USB3_DL_CTRL_FW_SET_DATA0) == 0)
153 if (time == timeout) {
159 temp = readl(regs + RCAR_USB3_DL_CTRL);
160 temp &= ~RCAR_USB3_DL_CTRL_ENABLE;
161 writel(temp, regs + RCAR_USB3_DL_CTRL);
163 for (time = 0; time < timeout; time++) {
164 val = readl(regs + RCAR_USB3_DL_CTRL);
165 if (val & RCAR_USB3_DL_CTRL_FW_SUCCESS) {
174 release_firmware(fw);
179 /* This function needs to initialize a "phy" of usb before */
180 int xhci_rcar_init_quirk(struct usb_hcd *hcd)
182 struct xhci_hcd *xhci = hcd_to_xhci(hcd);
184 /* If hcd->regs is NULL, we don't just call the following function */
189 * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
190 * to 1. However, these SoCs don't support 64-bit address memory
191 * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
192 * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
195 if (xhci_rcar_is_gen2(hcd->self.controller) ||
196 xhci_rcar_is_gen3(hcd->self.controller))
197 xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
199 return xhci_rcar_download_firmware(hcd);