drivers/usb/musb/omap2430.c

   1 /*
   2  * Copyright (C) 2005-2007 by Texas Instruments
   3  * Some code has been taken from tusb6010.c
   4  * Copyrights for that are attributable to:
   5  * Copyright (C) 2006 Nokia Corporation
   6  * Tony Lindgren <tony@atomide.com>
   7  *
   8  * This file is part of the Inventra Controller Driver for Linux.
   9  *
  10  * The Inventra Controller Driver for Linux is free software; you
  11  * can redistribute it and/or modify it under the terms of the GNU
  12  * General Public License version 2 as published by the Free Software
  13  * Foundation.
  14  *
  15  * The Inventra Controller Driver for Linux is distributed in
  16  * the hope that it will be useful, but WITHOUT ANY WARRANTY;
  17  * without even the implied warranty of MERCHANTABILITY or
  18  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
  19  * License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with The Inventra Controller Driver for Linux ; if not,
  23  * write to the Free Software Foundation, Inc., 59 Temple Place,
  24  * Suite 330, Boston, MA  02111-1307  USA
  25  *
  26  */
  27 #include <linux/module.h>
  28 #include <linux/kernel.h>
  29 #include <linux/sched.h>
  30 #include <linux/init.h>
  31 #include <linux/list.h>
  32 #include <linux/io.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/dma-mapping.h>
  35 #include <linux/pm_runtime.h>
  36 #include <linux/err.h>
  37 #include <linux/usb/musb-omap.h>
  38
  39 #include "musb_core.h"
  40 #include "omap2430.h"
  41
  42 struct omap2430_glue {
  43         struct device           *dev;
  44         struct platform_device  *musb;
  45         enum omap_musb_vbus_id_status status;
  46         struct work_struct      omap_musb_mailbox_work;
  47 };
  48 #define glue_to_musb(g)         platform_get_drvdata(g->musb)
  49
  50 struct omap2430_glue            *_glue;
  51
  52 static struct timer_list musb_idle_timer;
  53
  54 static void musb_do_idle(unsigned long _musb)
  55 {
  56         struct musb     *musb = (void *)_musb;
  57         unsigned long   flags;
  58         u8      power;
  59         u8      devctl;
  60
  61         spin_lock_irqsave(&musb->lock, flags);
  62
  63         switch (musb->xceiv->state) {
  64         case OTG_STATE_A_WAIT_BCON:
  65
  66                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
  67                 if (devctl & MUSB_DEVCTL_BDEVICE) {
  68                         musb->xceiv->state = OTG_STATE_B_IDLE;
  69                         MUSB_DEV_MODE(musb);
  70                 } else {
  71                         musb->xceiv->state = OTG_STATE_A_IDLE;
  72                         MUSB_HST_MODE(musb);
  73                 }
  74                 break;
  75         case OTG_STATE_A_SUSPEND:
  76                 /* finish RESUME signaling? */
  77                 if (musb->port1_status & MUSB_PORT_STAT_RESUME) {
  78                         power = musb_readb(musb->mregs, MUSB_POWER);
  79                         power &= ~MUSB_POWER_RESUME;
  80                         dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power);
  81                         musb_writeb(musb->mregs, MUSB_POWER, power);
  82                         musb->is_active = 1;
  83                         musb->port1_status &= ~(USB_PORT_STAT_SUSPEND
  84                                                 | MUSB_PORT_STAT_RESUME);
  85                         musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16;
  86                         usb_hcd_poll_rh_status(musb_to_hcd(musb));
  87                         /* NOTE: it might really be A_WAIT_BCON ... */
  88                         musb->xceiv->state = OTG_STATE_A_HOST;
  89                 }
  90                 break;
  91         case OTG_STATE_A_HOST:
  92                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
  93                 if (devctl &  MUSB_DEVCTL_BDEVICE)
  94                         musb->xceiv->state = OTG_STATE_B_IDLE;
  95                 else
  96                         musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
  97         default:
  98                 break;
  99         }
 100         spin_unlock_irqrestore(&musb->lock, flags);
 101 }
 102
 103
 104 static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout)
 105 {
 106         unsigned long           default_timeout = jiffies + msecs_to_jiffies(3);
 107         static unsigned long    last_timer;
 108
 109         if (timeout == 0)
 110                 timeout = default_timeout;
 111
 112         /* Never idle if active, or when VBUS timeout is not set as host */
 113         if (musb->is_active || ((musb->a_wait_bcon == 0)
 114                         && (musb->xceiv->state == OTG_STATE_A_WAIT_BCON))) {
 115                 dev_dbg(musb->controller, "%s active, deleting timer\n",
 116                         otg_state_string(musb->xceiv->state));
 117                 del_timer(&musb_idle_timer);
 118                 last_timer = jiffies;
 119                 return;
 120         }
 121
 122         if (time_after(last_timer, timeout)) {
 123                 if (!timer_pending(&musb_idle_timer))
 124                         last_timer = timeout;
 125                 else {
 126                         dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n");
 127                         return;
 128                 }
 129         }
 130         last_timer = timeout;
 131
 132         dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n",
 133                 otg_state_string(musb->xceiv->state),
 134                 (unsigned long)jiffies_to_msecs(timeout - jiffies));
 135         mod_timer(&musb_idle_timer, timeout);
 136 }
 137
 138 static void omap2430_musb_set_vbus(struct musb *musb, int is_on)
 139 {
 140         struct usb_otg  *otg = musb->xceiv->otg;
 141         u8              devctl;
 142         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 143         int ret = 1;
 144         /* HDRC controls CPEN, but beware current surges during device
 145          * connect.  They can trigger transient overcurrent conditions
 146          * that must be ignored.
 147          */
 148
 149         devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 150
 151         if (is_on) {
 152                 if (musb->xceiv->state == OTG_STATE_A_IDLE) {
 153                         /* start the session */
 154                         devctl |= MUSB_DEVCTL_SESSION;
 155                         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 156                         /*
 157                          * Wait for the musb to set as A device to enable the
 158                          * VBUS
 159                          */
 160                         while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
 161
 162                                 cpu_relax();
 163
 164                                 if (time_after(jiffies, timeout)) {
 165                                         dev_err(musb->controller,
 166                                         "configured as A device timeout");
 167                                         ret = -EINVAL;
 168                                         break;
 169                                 }
 170                         }
 171
 172                         if (ret && otg->set_vbus)
 173                                 otg_set_vbus(otg, 1);
 174                 } else {
 175                         musb->is_active = 1;
 176                         otg->default_a = 1;
 177                         musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
 178                         devctl |= MUSB_DEVCTL_SESSION;
 179                         MUSB_HST_MODE(musb);
 180                 }
 181         } else {
 182                 musb->is_active = 0;
 183
 184                 /* NOTE:  we're skipping A_WAIT_VFALL -> A_IDLE and
 185                  * jumping right to B_IDLE...
 186                  */
 187
 188                 otg->default_a = 0;
 189                 musb->xceiv->state = OTG_STATE_B_IDLE;
 190                 devctl &= ~MUSB_DEVCTL_SESSION;
 191
 192                 MUSB_DEV_MODE(musb);
 193         }
 194         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 195
 196         dev_dbg(musb->controller, "VBUS %s, devctl %02x "
 197                 /* otg %3x conf %08x prcm %08x */ "\n",
 198                 otg_state_string(musb->xceiv->state),
 199                 musb_readb(musb->mregs, MUSB_DEVCTL));
 200 }
 201
 202 static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode)
 203 {
 204         u8      devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 205
 206         devctl |= MUSB_DEVCTL_SESSION;
 207         musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 208
 209         return 0;
 210 }
 211
 212 static inline void omap2430_low_level_exit(struct musb *musb)
 213 {
 214         u32 l;
 215
 216         /* in any role */
 217         l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 218         l |= ENABLEFORCE;       /* enable MSTANDBY */
 219         musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 220 }
 221
 222 static inline void omap2430_low_level_init(struct musb *musb)
 223 {
 224         u32 l;
 225
 226         l = musb_readl(musb->mregs, OTG_FORCESTDBY);
 227         l &= ~ENABLEFORCE;      /* disable MSTANDBY */
 228         musb_writel(musb->mregs, OTG_FORCESTDBY, l);
 229 }
 230
 231 void omap_musb_mailbox(enum omap_musb_vbus_id_status status)
 232 {
 233         struct omap2430_glue    *glue = _glue;
 234         struct musb             *musb = glue_to_musb(glue);
 235
 236         glue->status = status;
 237         if (!musb) {
 238                 dev_err(glue->dev, "musb core is not yet ready\n");
 239                 return;
 240         }
 241
 242         schedule_work(&glue->omap_musb_mailbox_work);
 243 }
 244 EXPORT_SYMBOL_GPL(omap_musb_mailbox);
 245
 246 static void omap_musb_set_mailbox(struct omap2430_glue *glue)
 247 {
 248         struct musb *musb = glue_to_musb(glue);
 249         struct device *dev = musb->controller;
 250         struct musb_hdrc_platform_data *pdata = dev->platform_data;
 251         struct omap_musb_board_data *data = pdata->board_data;
 252         struct usb_otg *otg = musb->xceiv->otg;
 253
 254         switch (glue->status) {
 255         case OMAP_MUSB_ID_GROUND:
 256                 dev_dbg(dev, "ID GND\n");
 257
 258                 otg->default_a = true;
 259                 musb->xceiv->state = OTG_STATE_A_IDLE;
 260                 musb->xceiv->last_event = USB_EVENT_ID;
 261                 if (!is_otg_enabled(musb) || musb->gadget_driver) {
 262                         pm_runtime_get_sync(dev);
 263                         usb_phy_init(musb->xceiv);
 264                         omap2430_musb_set_vbus(musb, 1);
 265                 }
 266                 break;
 267
 268         case OMAP_MUSB_VBUS_VALID:
 269                 dev_dbg(dev, "VBUS Connect\n");
 270
 271                 otg->default_a = false;
 272                 musb->xceiv->state = OTG_STATE_B_IDLE;
 273                 musb->xceiv->last_event = USB_EVENT_VBUS;
 274                 if (musb->gadget_driver)
 275                         pm_runtime_get_sync(dev);
 276                 usb_phy_init(musb->xceiv);
 277                 break;
 278
 279         case OMAP_MUSB_ID_FLOAT:
 280         case OMAP_MUSB_VBUS_OFF:
 281                 dev_dbg(dev, "VBUS Disconnect\n");
 282
 283                 musb->xceiv->last_event = USB_EVENT_NONE;
 284                 if (is_otg_enabled(musb) || is_peripheral_enabled(musb))
 285                         if (musb->gadget_driver) {
 286                                 pm_runtime_mark_last_busy(dev);
 287                                 pm_runtime_put_autosuspend(dev);
 288                         }
 289
 290                 if (data->interface_type == MUSB_INTERFACE_UTMI) {
 291                         if (musb->xceiv->otg->set_vbus)
 292                                 otg_set_vbus(musb->xceiv->otg, 0);
 293                 }
 294                 usb_phy_shutdown(musb->xceiv);
 295                 break;
 296         default:
 297                 dev_dbg(dev, "ID float\n");
 298         }
 299 }
 300
 301
 302 static void omap_musb_mailbox_work(struct work_struct *mailbox_work)
 303 {
 304         struct omap2430_glue *glue = container_of(mailbox_work,
 305                                 struct omap2430_glue, omap_musb_mailbox_work);
 306         omap_musb_set_mailbox(glue);
 307 }
 308
 309 static int omap2430_musb_init(struct musb *musb)
 310 {
 311         u32 l;
 312         int status = 0;
 313         struct device *dev = musb->controller;
 314         struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 315         struct musb_hdrc_platform_data *plat = dev->platform_data;
 316         struct omap_musb_board_data *data = plat->board_data;
 317
 318         /* We require some kind of external transceiver, hooked
 319          * up through ULPI.  TWL4030-family PMICs include one,
 320          * which needs a driver, drivers aren't always needed.
 321          */
 322         musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
 323         if (IS_ERR_OR_NULL(musb->xceiv)) {
 324                 pr_err("HS USB OTG: no transceiver configured\n");
 325                 return -ENODEV;
 326         }
 327
 328         status = pm_runtime_get_sync(dev);
 329         if (status < 0) {
 330                 dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status);
 331                 goto err1;
 332         }
 333
 334         l = musb_readl(musb->mregs, OTG_INTERFSEL);
 335
 336         if (data->interface_type == MUSB_INTERFACE_UTMI) {
 337                 /* OMAP4 uses Internal PHY GS70 which uses UTMI interface */
 338                 l &= ~ULPI_12PIN;       /* Disable ULPI */
 339                 l |= UTMI_8BIT;         /* Enable UTMI  */
 340         } else {
 341                 l |= ULPI_12PIN;
 342         }
 343
 344         musb_writel(musb->mregs, OTG_INTERFSEL, l);
 345
 346         pr_debug("HS USB OTG: revision 0x%x, sysconfig 0x%02x, "
 347                         "sysstatus 0x%x, intrfsel 0x%x, simenable  0x%x\n",
 348                         musb_readl(musb->mregs, OTG_REVISION),
 349                         musb_readl(musb->mregs, OTG_SYSCONFIG),
 350                         musb_readl(musb->mregs, OTG_SYSSTATUS),
 351                         musb_readl(musb->mregs, OTG_INTERFSEL),
 352                         musb_readl(musb->mregs, OTG_SIMENABLE));
 353
 354         setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
 355
 356         if (glue->status != OMAP_MUSB_UNKNOWN)
 357                 omap_musb_set_mailbox(glue);
 358
 359         pm_runtime_put_noidle(musb->controller);
 360         return 0;
 361
 362 err1:
 363         return status;
 364 }
 365
 366 static void omap2430_musb_enable(struct musb *musb)
 367 {
 368         u8              devctl;
 369         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 370         struct device *dev = musb->controller;
 371         struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 372         struct musb_hdrc_platform_data *pdata = dev->platform_data;
 373         struct omap_musb_board_data *data = pdata->board_data;
 374
 375         switch (glue->status) {
 376
 377         case OMAP_MUSB_ID_GROUND:
 378                 usb_phy_init(musb->xceiv);
 379                 if (data->interface_type != MUSB_INTERFACE_UTMI)
 380                         break;
 381                 devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
 382                 /* start the session */
 383                 devctl |= MUSB_DEVCTL_SESSION;
 384                 musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
 385                 while (musb_readb(musb->mregs, MUSB_DEVCTL) &
 386                                 MUSB_DEVCTL_BDEVICE) {
 387                         cpu_relax();
 388
 389                         if (time_after(jiffies, timeout)) {
 390                                 dev_err(dev, "configured as A device timeout");
 391                                 break;
 392                         }
 393                 }
 394                 break;
 395
 396         case OMAP_MUSB_VBUS_VALID:
 397                 usb_phy_init(musb->xceiv);
 398                 break;
 399
 400         default:
 401                 break;
 402         }
 403 }
 404
 405 static void omap2430_musb_disable(struct musb *musb)
 406 {
 407         struct device *dev = musb->controller;
 408         struct omap2430_glue *glue = dev_get_drvdata(dev->parent);
 409
 410         if (glue->status != OMAP_MUSB_UNKNOWN)
 411                 usb_phy_shutdown(musb->xceiv);
 412 }
 413
 414 static int omap2430_musb_exit(struct musb *musb)
 415 {
 416         del_timer_sync(&musb_idle_timer);
 417
 418         omap2430_low_level_exit(musb);
 419
 420         return 0;
 421 }
 422
 423 static const struct musb_platform_ops omap2430_ops = {
 424         .init           = omap2430_musb_init,
 425         .exit           = omap2430_musb_exit,
 426
 427         .set_mode       = omap2430_musb_set_mode,
 428         .try_idle       = omap2430_musb_try_idle,
 429
 430         .set_vbus       = omap2430_musb_set_vbus,
 431
 432         .enable         = omap2430_musb_enable,
 433         .disable        = omap2430_musb_disable,
 434 };
 435
 436 static u64 omap2430_dmamask = DMA_BIT_MASK(32);
 437
 438 static int __devinit omap2430_probe(struct platform_device *pdev)
 439 {
 440         struct musb_hdrc_platform_data  *pdata = pdev->dev.platform_data;
 441         struct platform_device          *musb;
 442         struct omap2430_glue            *glue;
 443         int                             ret = -ENOMEM;
 444
 445         glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
 446         if (!glue) {
 447                 dev_err(&pdev->dev, "failed to allocate glue context\n");
 448                 goto err0;
 449         }
 450
 451         musb = platform_device_alloc("musb-hdrc", -1);
 452         if (!musb) {
 453                 dev_err(&pdev->dev, "failed to allocate musb device\n");
 454                 goto err0;
 455         }
 456
 457         musb->dev.parent                = &pdev->dev;
 458         musb->dev.dma_mask              = &omap2430_dmamask;
 459         musb->dev.coherent_dma_mask     = omap2430_dmamask;
 460
 461         glue->dev                       = &pdev->dev;
 462         glue->musb                      = musb;
 463         glue->status                    = OMAP_MUSB_UNKNOWN;
 464
 465         pdata->platform_ops             = &omap2430_ops;
 466
 467         platform_set_drvdata(pdev, glue);
 468
 469         /*
 470          * REVISIT if we ever have two instances of the wrapper, we will be
 471          * in big trouble
 472          */
 473         _glue   = glue;
 474
 475         INIT_WORK(&glue->omap_musb_mailbox_work, omap_musb_mailbox_work);
 476
 477         ret = platform_device_add_resources(musb, pdev->resource,
 478                         pdev->num_resources);
 479         if (ret) {
 480                 dev_err(&pdev->dev, "failed to add resources\n");
 481                 goto err1;
 482         }
 483
 484         ret = platform_device_add_data(musb, pdata, sizeof(*pdata));
 485         if (ret) {
 486                 dev_err(&pdev->dev, "failed to add platform_data\n");
 487                 goto err1;
 488         }
 489
 490         pm_runtime_enable(&pdev->dev);
 491
 492         ret = platform_device_add(musb);
 493         if (ret) {
 494                 dev_err(&pdev->dev, "failed to register musb device\n");
 495                 goto err1;
 496         }
 497
 498         return 0;
 499
 500 err1:
 501         platform_device_put(musb);
 502
 503 err0:
 504         return ret;
 505 }
 506
 507 static int __devexit omap2430_remove(struct platform_device *pdev)
 508 {
 509         struct omap2430_glue            *glue = platform_get_drvdata(pdev);
 510
 511         cancel_work_sync(&glue->omap_musb_mailbox_work);
 512         platform_device_del(glue->musb);
 513         platform_device_put(glue->musb);
 514
 515         return 0;
 516 }
 517
 518 #ifdef CONFIG_PM
 519
 520 static int omap2430_runtime_suspend(struct device *dev)
 521 {
 522         struct omap2430_glue            *glue = dev_get_drvdata(dev);
 523         struct musb                     *musb = glue_to_musb(glue);
 524
 525         if (musb) {
 526                 musb->context.otg_interfsel = musb_readl(musb->mregs,
 527                                 OTG_INTERFSEL);
 528
 529                 omap2430_low_level_exit(musb);
 530                 usb_phy_set_suspend(musb->xceiv, 1);
 531         }
 532
 533         return 0;
 534 }
 535
 536 static int omap2430_runtime_resume(struct device *dev)
 537 {
 538         struct omap2430_glue            *glue = dev_get_drvdata(dev);
 539         struct musb                     *musb = glue_to_musb(glue);
 540
 541         if (musb) {
 542                 omap2430_low_level_init(musb);
 543                 musb_writel(musb->mregs, OTG_INTERFSEL,
 544                                 musb->context.otg_interfsel);
 545
 546                 usb_phy_set_suspend(musb->xceiv, 0);
 547         }
 548
 549         return 0;
 550 }
 551
 552 static struct dev_pm_ops omap2430_pm_ops = {
 553         .runtime_suspend = omap2430_runtime_suspend,
 554         .runtime_resume = omap2430_runtime_resume,
 555 };
 556
 557 #define DEV_PM_OPS      (&omap2430_pm_ops)
 558 #else
 559 #define DEV_PM_OPS      NULL
 560 #endif
 561
 562 static struct platform_driver omap2430_driver = {
 563         .probe          = omap2430_probe,
 564         .remove         = __devexit_p(omap2430_remove),
 565         .driver         = {
 566                 .name   = "musb-omap2430",
 567                 .pm     = DEV_PM_OPS,
 568         },
 569 };
 570
 571 MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer");
 572 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 573 MODULE_LICENSE("GPL v2");
 574
 575 static int __init omap2430_init(void)
 576 {
 577         return platform_driver_register(&omap2430_driver);
 578 }
 579 subsys_initcall(omap2430_init);
 580
 581 static void __exit omap2430_exit(void)
 582 {
 583         platform_driver_unregister(&omap2430_driver);
 584 }
 585 module_exit(omap2430_exit);