drivers/usb/phy/phy-fsl-usb.c

   1 /*
   2  * Copyright (C) 2007,2008 Freescale semiconductor, Inc.
   3  *
   4  * Author: Li Yang <LeoLi@freescale.com>
   5  *         Jerry Huang <Chang-Ming.Huang@freescale.com>
   6  *
   7  * Initialization based on code from Shlomi Gridish.
   8  *
   9  * This program is free software; you can redistribute  it and/or modify it
  10  * under  the terms of  the GNU General  Public License as published by the
  11  * Free Software Foundation;  either version 2 of the  License, or (at your
  12  * option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * You should have received a copy of the  GNU General Public License along
  20  * with this program; if not, write  to the Free Software Foundation, Inc.,
  21  * 675 Mass Ave, Cambridge, MA 02139, USA.
  22  */
  23
  24 #include <linux/module.h>
  25 #include <linux/kernel.h>
  26 #include <linux/delay.h>
  27 #include <linux/slab.h>
  28 #include <linux/proc_fs.h>
  29 #include <linux/errno.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/io.h>
  32 #include <linux/timer.h>
  33 #include <linux/usb.h>
  34 #include <linux/device.h>
  35 #include <linux/usb/ch9.h>
  36 #include <linux/usb/gadget.h>
  37 #include <linux/workqueue.h>
  38 #include <linux/time.h>
  39 #include <linux/fsl_devices.h>
  40 #include <linux/platform_device.h>
  41 #include <linux/uaccess.h>
  42
  43 #include <asm/unaligned.h>
  44
  45 #include "phy-fsl-usb.h"
  46
  47 #define DRIVER_VERSION "Rev. 1.55"
  48 #define DRIVER_AUTHOR "Jerry Huang/Li Yang"
  49 #define DRIVER_DESC "Freescale USB OTG Transceiver Driver"
  50 #define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION
  51
  52 static const char driver_name[] = "fsl-usb2-otg";
  53
  54 const pm_message_t otg_suspend_state = {
  55         .event = 1,
  56 };
  57
  58 #define HA_DATA_PULSE
  59
  60 static struct usb_dr_mmap *usb_dr_regs;
  61 static struct fsl_otg *fsl_otg_dev;
  62 static int srp_wait_done;
  63
  64 /* FSM timers */
  65 struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr,
  66         *b_ase0_brst_tmr, *b_se0_srp_tmr;
  67
  68 /* Driver specific timers */
  69 struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr,
  70         *b_srp_wait_tmr, *a_wait_enum_tmr;
  71
  72 static struct list_head active_timers;
  73
  74 static struct fsl_otg_config fsl_otg_initdata = {
  75         .otg_port = 1,
  76 };
  77
  78 #ifdef CONFIG_PPC32
  79 static u32 _fsl_readl_be(const unsigned __iomem *p)
  80 {
  81         return in_be32(p);
  82 }
  83
  84 static u32 _fsl_readl_le(const unsigned __iomem *p)
  85 {
  86         return in_le32(p);
  87 }
  88
  89 static void _fsl_writel_be(u32 v, unsigned __iomem *p)
  90 {
  91         out_be32(p, v);
  92 }
  93
  94 static void _fsl_writel_le(u32 v, unsigned __iomem *p)
  95 {
  96         out_le32(p, v);
  97 }
  98
  99 static u32 (*_fsl_readl)(const unsigned __iomem *p);
 100 static void (*_fsl_writel)(u32 v, unsigned __iomem *p);
 101
 102 #define fsl_readl(p)            (*_fsl_readl)((p))
 103 #define fsl_writel(v, p)        (*_fsl_writel)((v), (p))
 104
 105 #else
 106 #define fsl_readl(addr)         readl(addr)
 107 #define fsl_writel(val, addr)   writel(val, addr)
 108 #endif /* CONFIG_PPC32 */
 109
 110 /* Routines to access transceiver ULPI registers */
 111 u8 view_ulpi(u8 addr)
 112 {
 113         u32 temp;
 114
 115         temp = 0x40000000 | (addr << 16);
 116         fsl_writel(temp, &usb_dr_regs->ulpiview);
 117         udelay(1000);
 118         while (temp & 0x40)
 119                 temp = fsl_readl(&usb_dr_regs->ulpiview);
 120         return (le32_to_cpu(temp) & 0x0000ff00) >> 8;
 121 }
 122
 123 int write_ulpi(u8 addr, u8 data)
 124 {
 125         u32 temp;
 126
 127         temp = 0x60000000 | (addr << 16) | data;
 128         fsl_writel(temp, &usb_dr_regs->ulpiview);
 129         return 0;
 130 }
 131
 132 /* -------------------------------------------------------------*/
 133 /* Operations that will be called from OTG Finite State Machine */
 134
 135 /* Charge vbus for vbus pulsing in SRP */
 136 void fsl_otg_chrg_vbus(struct otg_fsm *fsm, int on)
 137 {
 138         u32 tmp;
 139
 140         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 141
 142         if (on)
 143                 /* stop discharging, start charging */
 144                 tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) |
 145                         OTGSC_CTRL_VBUS_CHARGE;
 146         else
 147                 /* stop charging */
 148                 tmp &= ~OTGSC_CTRL_VBUS_CHARGE;
 149
 150         fsl_writel(tmp, &usb_dr_regs->otgsc);
 151 }
 152
 153 /* Discharge vbus through a resistor to ground */
 154 void fsl_otg_dischrg_vbus(int on)
 155 {
 156         u32 tmp;
 157
 158         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 159
 160         if (on)
 161                 /* stop charging, start discharging */
 162                 tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) |
 163                         OTGSC_CTRL_VBUS_DISCHARGE;
 164         else
 165                 /* stop discharging */
 166                 tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE;
 167
 168         fsl_writel(tmp, &usb_dr_regs->otgsc);
 169 }
 170
 171 /* A-device driver vbus, controlled through PP bit in PORTSC */
 172 void fsl_otg_drv_vbus(struct otg_fsm *fsm, int on)
 173 {
 174         u32 tmp;
 175
 176         if (on) {
 177                 tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS;
 178                 fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc);
 179         } else {
 180                 tmp = fsl_readl(&usb_dr_regs->portsc) &
 181                       ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER;
 182                 fsl_writel(tmp, &usb_dr_regs->portsc);
 183         }
 184 }
 185
 186 /*
 187  * Pull-up D+, signalling connect by periperal. Also used in
 188  * data-line pulsing in SRP
 189  */
 190 void fsl_otg_loc_conn(struct otg_fsm *fsm, int on)
 191 {
 192         u32 tmp;
 193
 194         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 195
 196         if (on)
 197                 tmp |= OTGSC_CTRL_DATA_PULSING;
 198         else
 199                 tmp &= ~OTGSC_CTRL_DATA_PULSING;
 200
 201         fsl_writel(tmp, &usb_dr_regs->otgsc);
 202 }
 203
 204 /*
 205  * Generate SOF by host.  This is controlled through suspend/resume the
 206  * port.  In host mode, controller will automatically send SOF.
 207  * Suspend will block the data on the port.
 208  */
 209 void fsl_otg_loc_sof(struct otg_fsm *fsm, int on)
 210 {
 211         u32 tmp;
 212
 213         tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS;
 214         if (on)
 215                 tmp |= PORTSC_PORT_FORCE_RESUME;
 216         else
 217                 tmp |= PORTSC_PORT_SUSPEND;
 218
 219         fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc);
 220
 221 }
 222
 223 /* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */
 224 void fsl_otg_start_pulse(struct otg_fsm *fsm)
 225 {
 226         u32 tmp;
 227
 228         srp_wait_done = 0;
 229 #ifdef HA_DATA_PULSE
 230         tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK;
 231         tmp |= OTGSC_HA_DATA_PULSE;
 232         fsl_writel(tmp, &usb_dr_regs->otgsc);
 233 #else
 234         fsl_otg_loc_conn(1);
 235 #endif
 236
 237         fsl_otg_add_timer(fsm, b_data_pulse_tmr);
 238 }
 239
 240 void b_data_pulse_end(unsigned long foo)
 241 {
 242 #ifdef HA_DATA_PULSE
 243 #else
 244         fsl_otg_loc_conn(0);
 245 #endif
 246
 247         /* Do VBUS pulse after data pulse */
 248         fsl_otg_pulse_vbus();
 249 }
 250
 251 void fsl_otg_pulse_vbus(void)
 252 {
 253         srp_wait_done = 0;
 254         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 1);
 255         /* start the timer to end vbus charge */
 256         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_vbus_pulse_tmr);
 257 }
 258
 259 void b_vbus_pulse_end(unsigned long foo)
 260 {
 261         fsl_otg_chrg_vbus(&fsl_otg_dev->fsm, 0);
 262
 263         /*
 264          * As USB3300 using the same a_sess_vld and b_sess_vld voltage
 265          * we need to discharge the bus for a while to distinguish
 266          * residual voltage of vbus pulsing and A device pull up
 267          */
 268         fsl_otg_dischrg_vbus(1);
 269         fsl_otg_add_timer(&fsl_otg_dev->fsm, b_srp_wait_tmr);
 270 }
 271
 272 void b_srp_end(unsigned long foo)
 273 {
 274         fsl_otg_dischrg_vbus(0);
 275         srp_wait_done = 1;
 276
 277         if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) &&
 278             fsl_otg_dev->fsm.b_sess_vld)
 279                 fsl_otg_dev->fsm.b_srp_done = 1;
 280 }
 281
 282 /*
 283  * Workaround for a_host suspending too fast.  When a_bus_req=0,
 284  * a_host will start by SRP.  It needs to set b_hnp_enable before
 285  * actually suspending to start HNP
 286  */
 287 void a_wait_enum(unsigned long foo)
 288 {
 289         VDBG("a_wait_enum timeout\n");
 290         if (!fsl_otg_dev->phy.otg->host->b_hnp_enable)
 291                 fsl_otg_add_timer(&fsl_otg_dev->fsm, a_wait_enum_tmr);
 292         else
 293                 otg_statemachine(&fsl_otg_dev->fsm);
 294 }
 295
 296 /* The timeout callback function to set time out bit */
 297 void set_tmout(unsigned long indicator)
 298 {
 299         *(int *)indicator = 1;
 300 }
 301
 302 /* Initialize timers */
 303 int fsl_otg_init_timers(struct otg_fsm *fsm)
 304 {
 305         /* FSM used timers */
 306         a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
 307                                 (unsigned long)&fsm->a_wait_vrise_tmout);
 308         if (!a_wait_vrise_tmr)
 309                 return -ENOMEM;
 310
 311         a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
 312                                 (unsigned long)&fsm->a_wait_bcon_tmout);
 313         if (!a_wait_bcon_tmr)
 314                 return -ENOMEM;
 315
 316         a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
 317                                 (unsigned long)&fsm->a_aidl_bdis_tmout);
 318         if (!a_aidl_bdis_tmr)
 319                 return -ENOMEM;
 320
 321         b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
 322                                 (unsigned long)&fsm->b_ase0_brst_tmout);
 323         if (!b_ase0_brst_tmr)
 324                 return -ENOMEM;
 325
 326         b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
 327                                 (unsigned long)&fsm->b_se0_srp);
 328         if (!b_se0_srp_tmr)
 329                 return -ENOMEM;
 330
 331         b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL,
 332                                 (unsigned long)&fsm->b_srp_done);
 333         if (!b_srp_fail_tmr)
 334                 return -ENOMEM;
 335
 336         a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10,
 337                                 (unsigned long)&fsm);
 338         if (!a_wait_enum_tmr)
 339                 return -ENOMEM;
 340
 341         /* device driver used timers */
 342         b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0);
 343         if (!b_srp_wait_tmr)
 344                 return -ENOMEM;
 345
 346         b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end,
 347                                 TB_DATA_PLS, 0);
 348         if (!b_data_pulse_tmr)
 349                 return -ENOMEM;
 350
 351         b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end,
 352                                 TB_VBUS_PLS, 0);
 353         if (!b_vbus_pulse_tmr)
 354                 return -ENOMEM;
 355
 356         return 0;
 357 }
 358
 359 /* Uninitialize timers */
 360 void fsl_otg_uninit_timers(void)
 361 {
 362         /* FSM used timers */
 363         kfree(a_wait_vrise_tmr);
 364         kfree(a_wait_bcon_tmr);
 365         kfree(a_aidl_bdis_tmr);
 366         kfree(b_ase0_brst_tmr);
 367         kfree(b_se0_srp_tmr);
 368         kfree(b_srp_fail_tmr);
 369         kfree(a_wait_enum_tmr);
 370
 371         /* device driver used timers */
 372         kfree(b_srp_wait_tmr);
 373         kfree(b_data_pulse_tmr);
 374         kfree(b_vbus_pulse_tmr);
 375 }
 376
 377 static struct fsl_otg_timer *fsl_otg_get_timer(enum otg_fsm_timer t)
 378 {
 379         struct fsl_otg_timer *timer;
 380
 381         /* REVISIT: use array of pointers to timers instead */
 382         switch (t) {
 383         case A_WAIT_VRISE:
 384                 timer = a_wait_vrise_tmr;
 385                 break;
 386         case A_WAIT_BCON:
 387                 timer = a_wait_vrise_tmr;
 388                 break;
 389         case A_AIDL_BDIS:
 390                 timer = a_wait_vrise_tmr;
 391                 break;
 392         case B_ASE0_BRST:
 393                 timer = a_wait_vrise_tmr;
 394                 break;
 395         case B_SE0_SRP:
 396                 timer = a_wait_vrise_tmr;
 397                 break;
 398         case B_SRP_FAIL:
 399                 timer = a_wait_vrise_tmr;
 400                 break;
 401         case A_WAIT_ENUM:
 402                 timer = a_wait_vrise_tmr;
 403                 break;
 404         default:
 405                 timer = NULL;
 406         }
 407
 408         return timer;
 409 }
 410
 411 /* Add timer to timer list */
 412 void fsl_otg_add_timer(struct otg_fsm *fsm, void *gtimer)
 413 {
 414         struct fsl_otg_timer *timer = gtimer;
 415         struct fsl_otg_timer *tmp_timer;
 416
 417         /*
 418          * Check if the timer is already in the active list,
 419          * if so update timer count
 420          */
 421         list_for_each_entry(tmp_timer, &active_timers, list)
 422             if (tmp_timer == timer) {
 423                 timer->count = timer->expires;
 424                 return;
 425         }
 426         timer->count = timer->expires;
 427         list_add_tail(&timer->list, &active_timers);
 428 }
 429
 430 static void fsl_otg_fsm_add_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 431 {
 432         struct fsl_otg_timer *timer;
 433
 434         timer = fsl_otg_get_timer(t);
 435         if (!timer)
 436                 return;
 437
 438         fsl_otg_add_timer(fsm, timer);
 439 }
 440
 441 /* Remove timer from the timer list; clear timeout status */
 442 void fsl_otg_del_timer(struct otg_fsm *fsm, void *gtimer)
 443 {
 444         struct fsl_otg_timer *timer = gtimer;
 445         struct fsl_otg_timer *tmp_timer, *del_tmp;
 446
 447         list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
 448                 if (tmp_timer == timer)
 449                         list_del(&timer->list);
 450 }
 451
 452 static void fsl_otg_fsm_del_timer(struct otg_fsm *fsm, enum otg_fsm_timer t)
 453 {
 454         struct fsl_otg_timer *timer;
 455
 456         timer = fsl_otg_get_timer(t);
 457         if (!timer)
 458                 return;
 459
 460         fsl_otg_del_timer(fsm, timer);
 461 }
 462
 463 /*
 464  * Reduce timer count by 1, and find timeout conditions.
 465  * Called by fsl_otg 1ms timer interrupt
 466  */
 467 int fsl_otg_tick_timer(void)
 468 {
 469         struct fsl_otg_timer *tmp_timer, *del_tmp;
 470         int expired = 0;
 471
 472         list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
 473                 tmp_timer->count--;
 474                 /* check if timer expires */
 475                 if (!tmp_timer->count) {
 476                         list_del(&tmp_timer->list);
 477                         tmp_timer->function(tmp_timer->data);
 478                         expired = 1;
 479                 }
 480         }
 481
 482         return expired;
 483 }
 484
 485 /* Reset controller, not reset the bus */
 486 void otg_reset_controller(void)
 487 {
 488         u32 command;
 489
 490         command = fsl_readl(&usb_dr_regs->usbcmd);
 491         command |= (1 << 1);
 492         fsl_writel(command, &usb_dr_regs->usbcmd);
 493         while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1))
 494                 ;
 495 }
 496
 497 /* Call suspend/resume routines in host driver */
 498 int fsl_otg_start_host(struct otg_fsm *fsm, int on)
 499 {
 500         struct usb_otg *otg = fsm->otg;
 501         struct device *dev;
 502         struct fsl_otg *otg_dev =
 503                 container_of(otg->usb_phy, struct fsl_otg, phy);
 504         u32 retval = 0;
 505
 506         if (!otg->host)
 507                 return -ENODEV;
 508         dev = otg->host->controller;
 509
 510         /*
 511          * Update a_vbus_vld state as a_vbus_vld int is disabled
 512          * in device mode
 513          */
 514         fsm->a_vbus_vld =
 515                 !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID);
 516         if (on) {
 517                 /* start fsl usb host controller */
 518                 if (otg_dev->host_working)
 519                         goto end;
 520                 else {
 521                         otg_reset_controller();
 522                         VDBG("host on......\n");
 523                         if (dev->driver->pm && dev->driver->pm->resume) {
 524                                 retval = dev->driver->pm->resume(dev);
 525                                 if (fsm->id) {
 526                                         /* default-b */
 527                                         fsl_otg_drv_vbus(fsm, 1);
 528                                         /*
 529                                          * Workaround: b_host can't driver
 530                                          * vbus, but PP in PORTSC needs to
 531                                          * be 1 for host to work.
 532                                          * So we set drv_vbus bit in
 533                                          * transceiver to 0 thru ULPI.
 534                                          */
 535                                         write_ulpi(0x0c, 0x20);
 536                                 }
 537                         }
 538
 539                         otg_dev->host_working = 1;
 540                 }
 541         } else {
 542                 /* stop fsl usb host controller */
 543                 if (!otg_dev->host_working)
 544                         goto end;
 545                 else {
 546                         VDBG("host off......\n");
 547                         if (dev && dev->driver) {
 548                                 if (dev->driver->pm && dev->driver->pm->suspend)
 549                                         retval = dev->driver->pm->suspend(dev);
 550                                 if (fsm->id)
 551                                         /* default-b */
 552                                         fsl_otg_drv_vbus(fsm, 0);
 553                         }
 554                         otg_dev->host_working = 0;
 555                 }
 556         }
 557 end:
 558         return retval;
 559 }
 560
 561 /*
 562  * Call suspend and resume function in udc driver
 563  * to stop and start udc driver.
 564  */
 565 int fsl_otg_start_gadget(struct otg_fsm *fsm, int on)
 566 {
 567         struct usb_otg *otg = fsm->otg;
 568         struct device *dev;
 569
 570         if (!otg->gadget || !otg->gadget->dev.parent)
 571                 return -ENODEV;
 572
 573         VDBG("gadget %s\n", on ? "on" : "off");
 574         dev = otg->gadget->dev.parent;
 575
 576         if (on) {
 577                 if (dev->driver->resume)
 578                         dev->driver->resume(dev);
 579         } else {
 580                 if (dev->driver->suspend)
 581                         dev->driver->suspend(dev, otg_suspend_state);
 582         }
 583
 584         return 0;
 585 }
 586
 587 /*
 588  * Called by initialization code of host driver.  Register host controller
 589  * to the OTG.  Suspend host for OTG role detection.
 590  */
 591 static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
 592 {
 593         struct fsl_otg *otg_dev;
 594
 595         if (!otg)
 596                 return -ENODEV;
 597
 598         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 599         if (otg_dev != fsl_otg_dev)
 600                 return -ENODEV;
 601
 602         otg->host = host;
 603
 604         otg_dev->fsm.a_bus_drop = 0;
 605         otg_dev->fsm.a_bus_req = 1;
 606
 607         if (host) {
 608                 VDBG("host off......\n");
 609
 610                 otg->host->otg_port = fsl_otg_initdata.otg_port;
 611                 otg->host->is_b_host = otg_dev->fsm.id;
 612                 /*
 613                  * must leave time for hub_wq to finish its thing
 614                  * before yanking the host driver out from under it,
 615                  * so suspend the host after a short delay.
 616                  */
 617                 otg_dev->host_working = 1;
 618                 schedule_delayed_work(&otg_dev->otg_event, 100);
 619                 return 0;
 620         } else {
 621                 /* host driver going away */
 622                 if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) &
 623                       OTGSC_STS_USB_ID)) {
 624                         /* Mini-A cable connected */
 625                         struct otg_fsm *fsm = &otg_dev->fsm;
 626
 627                         otg->state = OTG_STATE_UNDEFINED;
 628                         fsm->protocol = PROTO_UNDEF;
 629                 }
 630         }
 631
 632         otg_dev->host_working = 0;
 633
 634         otg_statemachine(&otg_dev->fsm);
 635
 636         return 0;
 637 }
 638
 639 /* Called by initialization code of udc.  Register udc to OTG. */
 640 static int fsl_otg_set_peripheral(struct usb_otg *otg,
 641                                         struct usb_gadget *gadget)
 642 {
 643         struct fsl_otg *otg_dev;
 644
 645         if (!otg)
 646                 return -ENODEV;
 647
 648         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 649         VDBG("otg_dev 0x%x\n", (int)otg_dev);
 650         VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev);
 651         if (otg_dev != fsl_otg_dev)
 652                 return -ENODEV;
 653
 654         if (!gadget) {
 655                 if (!otg->default_a)
 656                         otg->gadget->ops->vbus_draw(otg->gadget, 0);
 657                 usb_gadget_vbus_disconnect(otg->gadget);
 658                 otg->gadget = 0;
 659                 otg_dev->fsm.b_bus_req = 0;
 660                 otg_statemachine(&otg_dev->fsm);
 661                 return 0;
 662         }
 663
 664         otg->gadget = gadget;
 665         otg->gadget->is_a_peripheral = !otg_dev->fsm.id;
 666
 667         otg_dev->fsm.b_bus_req = 1;
 668
 669         /* start the gadget right away if the ID pin says Mini-B */
 670         pr_debug("ID pin=%d\n", otg_dev->fsm.id);
 671         if (otg_dev->fsm.id == 1) {
 672                 fsl_otg_start_host(&otg_dev->fsm, 0);
 673                 otg_drv_vbus(&otg_dev->fsm, 0);
 674                 fsl_otg_start_gadget(&otg_dev->fsm, 1);
 675         }
 676
 677         return 0;
 678 }
 679
 680 /* Set OTG port power, only for B-device */
 681 static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
 682 {
 683         if (!fsl_otg_dev)
 684                 return -ENODEV;
 685         if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
 686                 pr_info("FSL OTG: Draw %d mA\n", mA);
 687
 688         return 0;
 689 }
 690
 691 /*
 692  * Delayed pin detect interrupt processing.
 693  *
 694  * When the Mini-A cable is disconnected from the board,
 695  * the pin-detect interrupt happens before the disconnect
 696  * interrupts for the connected device(s).  In order to
 697  * process the disconnect interrupt(s) prior to switching
 698  * roles, the pin-detect interrupts are delayed, and handled
 699  * by this routine.
 700  */
 701 static void fsl_otg_event(struct work_struct *work)
 702 {
 703         struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work);
 704         struct otg_fsm *fsm = &og->fsm;
 705
 706         if (fsm->id) {          /* switch to gadget */
 707                 fsl_otg_start_host(fsm, 0);
 708                 otg_drv_vbus(fsm, 0);
 709                 fsl_otg_start_gadget(fsm, 1);
 710         }
 711 }
 712
 713 /* B-device start SRP */
 714 static int fsl_otg_start_srp(struct usb_otg *otg)
 715 {
 716         struct fsl_otg *otg_dev;
 717
 718         if (!otg || otg->state != OTG_STATE_B_IDLE)
 719                 return -ENODEV;
 720
 721         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 722         if (otg_dev != fsl_otg_dev)
 723                 return -ENODEV;
 724
 725         otg_dev->fsm.b_bus_req = 1;
 726         otg_statemachine(&otg_dev->fsm);
 727
 728         return 0;
 729 }
 730
 731 /* A_host suspend will call this function to start hnp */
 732 static int fsl_otg_start_hnp(struct usb_otg *otg)
 733 {
 734         struct fsl_otg *otg_dev;
 735
 736         if (!otg)
 737                 return -ENODEV;
 738
 739         otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
 740         if (otg_dev != fsl_otg_dev)
 741                 return -ENODEV;
 742
 743         pr_debug("start_hnp...\n");
 744
 745         /* clear a_bus_req to enter a_suspend state */
 746         otg_dev->fsm.a_bus_req = 0;
 747         otg_statemachine(&otg_dev->fsm);
 748
 749         return 0;
 750 }
 751
 752 /*
 753  * Interrupt handler.  OTG/host/peripheral share the same int line.
 754  * OTG driver clears OTGSC interrupts and leaves USB interrupts
 755  * intact.  It needs to have knowledge of some USB interrupts
 756  * such as port change.
 757  */
 758 irqreturn_t fsl_otg_isr(int irq, void *dev_id)
 759 {
 760         struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm;
 761         struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg;
 762         u32 otg_int_src, otg_sc;
 763
 764         otg_sc = fsl_readl(&usb_dr_regs->otgsc);
 765         otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8);
 766
 767         /* Only clear otg interrupts */
 768         fsl_writel(otg_sc, &usb_dr_regs->otgsc);
 769
 770         /*FIXME: ID change not generate when init to 0 */
 771         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 772         otg->default_a = (fsm->id == 0);
 773
 774         /* process OTG interrupts */
 775         if (otg_int_src) {
 776                 if (otg_int_src & OTGSC_INTSTS_USB_ID) {
 777                         fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0;
 778                         otg->default_a = (fsm->id == 0);
 779                         /* clear conn information */
 780                         if (fsm->id)
 781                                 fsm->b_conn = 0;
 782                         else
 783                                 fsm->a_conn = 0;
 784
 785                         if (otg->host)
 786                                 otg->host->is_b_host = fsm->id;
 787                         if (otg->gadget)
 788                                 otg->gadget->is_a_peripheral = !fsm->id;
 789                         VDBG("ID int (ID is %d)\n", fsm->id);
 790
 791                         if (fsm->id) {  /* switch to gadget */
 792                                 schedule_delayed_work(
 793                                         &((struct fsl_otg *)dev_id)->otg_event,
 794                                         100);
 795                         } else {        /* switch to host */
 796                                 cancel_delayed_work(&
 797                                                     ((struct fsl_otg *)dev_id)->
 798                                                     otg_event);
 799                                 fsl_otg_start_gadget(fsm, 0);
 800                                 otg_drv_vbus(fsm, 1);
 801                                 fsl_otg_start_host(fsm, 1);
 802                         }
 803                         return IRQ_HANDLED;
 804                 }
 805         }
 806         return IRQ_NONE;
 807 }
 808
 809 static struct otg_fsm_ops fsl_otg_ops = {
 810         .chrg_vbus = fsl_otg_chrg_vbus,
 811         .drv_vbus = fsl_otg_drv_vbus,
 812         .loc_conn = fsl_otg_loc_conn,
 813         .loc_sof = fsl_otg_loc_sof,
 814         .start_pulse = fsl_otg_start_pulse,
 815
 816         .add_timer = fsl_otg_fsm_add_timer,
 817         .del_timer = fsl_otg_fsm_del_timer,
 818
 819         .start_host = fsl_otg_start_host,
 820         .start_gadget = fsl_otg_start_gadget,
 821 };
 822
 823 /* Initialize the global variable fsl_otg_dev and request IRQ for OTG */
 824 static int fsl_otg_conf(struct platform_device *pdev)
 825 {
 826         struct fsl_otg *fsl_otg_tc;
 827         int status;
 828
 829         if (fsl_otg_dev)
 830                 return 0;
 831
 832         /* allocate space to fsl otg device */
 833         fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL);
 834         if (!fsl_otg_tc)
 835                 return -ENOMEM;
 836
 837         fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
 838         if (!fsl_otg_tc->phy.otg) {
 839                 kfree(fsl_otg_tc);
 840                 return -ENOMEM;
 841         }
 842
 843         INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event);
 844
 845         INIT_LIST_HEAD(&active_timers);
 846         status = fsl_otg_init_timers(&fsl_otg_tc->fsm);
 847         if (status) {
 848                 pr_info("Couldn't init OTG timers\n");
 849                 goto err;
 850         }
 851         mutex_init(&fsl_otg_tc->fsm.lock);
 852
 853         /* Set OTG state machine operations */
 854         fsl_otg_tc->fsm.ops = &fsl_otg_ops;
 855
 856         /* initialize the otg structure */
 857         fsl_otg_tc->phy.label = DRIVER_DESC;
 858         fsl_otg_tc->phy.dev = &pdev->dev;
 859         fsl_otg_tc->phy.set_power = fsl_otg_set_power;
 860
 861         fsl_otg_tc->phy.otg->usb_phy = &fsl_otg_tc->phy;
 862         fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host;
 863         fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral;
 864         fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp;
 865         fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp;
 866
 867         fsl_otg_dev = fsl_otg_tc;
 868
 869         /* Store the otg transceiver */
 870         status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2);
 871         if (status) {
 872                 pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");
 873                 goto err;
 874         }
 875
 876         return 0;
 877 err:
 878         fsl_otg_uninit_timers();
 879         kfree(fsl_otg_tc->phy.otg);
 880         kfree(fsl_otg_tc);
 881         return status;
 882 }
 883
 884 /* OTG Initialization */
 885 int usb_otg_start(struct platform_device *pdev)
 886 {
 887         struct fsl_otg *p_otg;
 888         struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2);
 889         struct otg_fsm *fsm;
 890         int status;
 891         struct resource *res;
 892         u32 temp;
 893         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 894
 895         p_otg = container_of(otg_trans, struct fsl_otg, phy);
 896         fsm = &p_otg->fsm;
 897
 898         /* Initialize the state machine structure with default values */
 899         SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED);
 900         fsm->otg = p_otg->phy.otg;
 901
 902         /* We don't require predefined MEM/IRQ resource index */
 903         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 904         if (!res)
 905                 return -ENXIO;
 906
 907         /* We don't request_mem_region here to enable resource sharing
 908          * with host/device */
 909
 910         usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap));
 911         p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs;
 912         pdata->regs = (void *)usb_dr_regs;
 913
 914         if (pdata->init && pdata->init(pdev) != 0)
 915                 return -EINVAL;
 916
 917         if (pdata->big_endian_mmio) {
 918                 _fsl_readl = _fsl_readl_be;
 919                 _fsl_writel = _fsl_writel_be;
 920         } else {
 921                 _fsl_readl = _fsl_readl_le;
 922                 _fsl_writel = _fsl_writel_le;
 923         }
 924
 925         /* request irq */
 926         p_otg->irq = platform_get_irq(pdev, 0);
 927         status = request_irq(p_otg->irq, fsl_otg_isr,
 928                                 IRQF_SHARED, driver_name, p_otg);
 929         if (status) {
 930                 dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n",
 931                         p_otg->irq, status);
 932                 iounmap(p_otg->dr_mem_map);
 933                 kfree(p_otg->phy.otg);
 934                 kfree(p_otg);
 935                 return status;
 936         }
 937
 938         /* stop the controller */
 939         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 940         temp &= ~USB_CMD_RUN_STOP;
 941         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 942
 943         /* reset the controller */
 944         temp = fsl_readl(&p_otg->dr_mem_map->usbcmd);
 945         temp |= USB_CMD_CTRL_RESET;
 946         fsl_writel(temp, &p_otg->dr_mem_map->usbcmd);
 947
 948         /* wait reset completed */
 949         while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET)
 950                 ;
 951
 952         /* configure the VBUSHS as IDLE(both host and device) */
 953         temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0);
 954         fsl_writel(temp, &p_otg->dr_mem_map->usbmode);
 955
 956         /* configure PHY interface */
 957         temp = fsl_readl(&p_otg->dr_mem_map->portsc);
 958         temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW);
 959         switch (pdata->phy_mode) {
 960         case FSL_USB2_PHY_ULPI:
 961                 temp |= PORTSC_PTS_ULPI;
 962                 break;
 963         case FSL_USB2_PHY_UTMI_WIDE:
 964                 temp |= PORTSC_PTW_16BIT;
 965                 /* fall through */
 966         case FSL_USB2_PHY_UTMI:
 967                 temp |= PORTSC_PTS_UTMI;
 968                 /* fall through */
 969         default:
 970                 break;
 971         }
 972         fsl_writel(temp, &p_otg->dr_mem_map->portsc);
 973
 974         if (pdata->have_sysif_regs) {
 975                 /* configure control enable IO output, big endian register */
 976                 temp = __raw_readl(&p_otg->dr_mem_map->control);
 977                 temp |= USB_CTRL_IOENB;
 978                 __raw_writel(temp, &p_otg->dr_mem_map->control);
 979         }
 980
 981         /* disable all interrupt and clear all OTGSC status */
 982         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
 983         temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK;
 984         temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE;
 985         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
 986
 987         /*
 988          * The identification (id) input is FALSE when a Mini-A plug is inserted
 989          * in the devices Mini-AB receptacle. Otherwise, this input is TRUE.
 990          * Also: record initial state of ID pin
 991          */
 992         if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
 993                 p_otg->phy.otg->state = OTG_STATE_UNDEFINED;
 994                 p_otg->fsm.id = 1;
 995         } else {
 996                 p_otg->phy.otg->state = OTG_STATE_A_IDLE;
 997                 p_otg->fsm.id = 0;
 998         }
 999
1000         pr_debug("initial ID pin=%d\n", p_otg->fsm.id);
1001
1002         /* enable OTG ID pin interrupt */
1003         temp = fsl_readl(&p_otg->dr_mem_map->otgsc);
1004         temp |= OTGSC_INTR_USB_ID_EN;
1005         temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN);
1006         fsl_writel(temp, &p_otg->dr_mem_map->otgsc);
1007
1008         return 0;
1009 }
1010
1011 /*
1012  * state file in sysfs
1013  */
1014 static int show_fsl_usb2_otg_state(struct device *dev,
1015                                    struct device_attribute *attr, char *buf)
1016 {
1017         struct otg_fsm *fsm = &fsl_otg_dev->fsm;
1018         char *next = buf;
1019         unsigned size = PAGE_SIZE;
1020         int t;
1021
1022         mutex_lock(&fsm->lock);
1023
1024         /* basic driver infomation */
1025         t = scnprintf(next, size,
1026                         DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n",
1027                         DRIVER_VERSION);
1028         size -= t;
1029         next += t;
1030
1031         /* Registers */
1032         t = scnprintf(next, size,
1033                         "OTGSC:   0x%08x\n"
1034                         "PORTSC:  0x%08x\n"
1035                         "USBMODE: 0x%08x\n"
1036                         "USBCMD:  0x%08x\n"
1037                         "USBSTS:  0x%08x\n"
1038                         "USBINTR: 0x%08x\n",
1039                         fsl_readl(&usb_dr_regs->otgsc),
1040                         fsl_readl(&usb_dr_regs->portsc),
1041                         fsl_readl(&usb_dr_regs->usbmode),
1042                         fsl_readl(&usb_dr_regs->usbcmd),
1043                         fsl_readl(&usb_dr_regs->usbsts),
1044                         fsl_readl(&usb_dr_regs->usbintr));
1045         size -= t;
1046         next += t;
1047
1048         /* State */
1049         t = scnprintf(next, size,
1050                       "OTG state: %s\n\n",
1051                       usb_otg_state_string(fsl_otg_dev->phy.otg->state));
1052         size -= t;
1053         next += t;
1054
1055         /* State Machine Variables */
1056         t = scnprintf(next, size,
1057                         "a_bus_req: %d\n"
1058                         "b_bus_req: %d\n"
1059                         "a_bus_resume: %d\n"
1060                         "a_bus_suspend: %d\n"
1061                         "a_conn: %d\n"
1062                         "a_sess_vld: %d\n"
1063                         "a_srp_det: %d\n"
1064                         "a_vbus_vld: %d\n"
1065                         "b_bus_resume: %d\n"
1066                         "b_bus_suspend: %d\n"
1067                         "b_conn: %d\n"
1068                         "b_se0_srp: %d\n"
1069                         "b_ssend_srp: %d\n"
1070                         "b_sess_vld: %d\n"
1071                         "id: %d\n",
1072                         fsm->a_bus_req,
1073                         fsm->b_bus_req,
1074                         fsm->a_bus_resume,
1075                         fsm->a_bus_suspend,
1076                         fsm->a_conn,
1077                         fsm->a_sess_vld,
1078                         fsm->a_srp_det,
1079                         fsm->a_vbus_vld,
1080                         fsm->b_bus_resume,
1081                         fsm->b_bus_suspend,
1082                         fsm->b_conn,
1083                         fsm->b_se0_srp,
1084                         fsm->b_ssend_srp,
1085                         fsm->b_sess_vld,
1086                         fsm->id);
1087         size -= t;
1088         next += t;
1089
1090         mutex_unlock(&fsm->lock);
1091
1092         return PAGE_SIZE - size;
1093 }
1094
1095 static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);
1096
1097
1098 /* Char driver interface to control some OTG input */
1099
1100 /*
1101  * Handle some ioctl command, such as get otg
1102  * status and set host suspend
1103  */
1104 static long fsl_otg_ioctl(struct file *file, unsigned int cmd,
1105                           unsigned long arg)
1106 {
1107         u32 retval = 0;
1108
1109         switch (cmd) {
1110         case GET_OTG_STATUS:
1111                 retval = fsl_otg_dev->host_working;
1112                 break;
1113
1114         case SET_A_SUSPEND_REQ:
1115                 fsl_otg_dev->fsm.a_suspend_req_inf = arg;
1116                 break;
1117
1118         case SET_A_BUS_DROP:
1119                 fsl_otg_dev->fsm.a_bus_drop = arg;
1120                 break;
1121
1122         case SET_A_BUS_REQ:
1123                 fsl_otg_dev->fsm.a_bus_req = arg;
1124                 break;
1125
1126         case SET_B_BUS_REQ:
1127                 fsl_otg_dev->fsm.b_bus_req = arg;
1128                 break;
1129
1130         default:
1131                 break;
1132         }
1133
1134         otg_statemachine(&fsl_otg_dev->fsm);
1135
1136         return retval;
1137 }
1138
1139 static int fsl_otg_open(struct inode *inode, struct file *file)
1140 {
1141         return 0;
1142 }
1143
1144 static int fsl_otg_release(struct inode *inode, struct file *file)
1145 {
1146         return 0;
1147 }
1148
1149 static const struct file_operations otg_fops = {
1150         .owner = THIS_MODULE,
1151         .llseek = NULL,
1152         .read = NULL,
1153         .write = NULL,
1154         .unlocked_ioctl = fsl_otg_ioctl,
1155         .open = fsl_otg_open,
1156         .release = fsl_otg_release,
1157 };
1158
1159 static int fsl_otg_probe(struct platform_device *pdev)
1160 {
1161         int ret;
1162
1163         if (!dev_get_platdata(&pdev->dev))
1164                 return -ENODEV;
1165
1166         /* configure the OTG */
1167         ret = fsl_otg_conf(pdev);
1168         if (ret) {
1169                 dev_err(&pdev->dev, "Couldn't configure OTG module\n");
1170                 return ret;
1171         }
1172
1173         /* start OTG */
1174         ret = usb_otg_start(pdev);
1175         if (ret) {
1176                 dev_err(&pdev->dev, "Can't init FSL OTG device\n");
1177                 return ret;
1178         }
1179
1180         ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops);
1181         if (ret) {
1182                 dev_err(&pdev->dev, "unable to register FSL OTG device\n");
1183                 return ret;
1184         }
1185
1186         ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1187         if (ret)
1188                 dev_warn(&pdev->dev, "Can't register sysfs attribute\n");
1189
1190         return ret;
1191 }
1192
1193 static int fsl_otg_remove(struct platform_device *pdev)
1194 {
1195         struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
1196
1197         usb_remove_phy(&fsl_otg_dev->phy);
1198         free_irq(fsl_otg_dev->irq, fsl_otg_dev);
1199
1200         iounmap((void *)usb_dr_regs);
1201
1202         fsl_otg_uninit_timers();
1203         kfree(fsl_otg_dev->phy.otg);
1204         kfree(fsl_otg_dev);
1205
1206         device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state);
1207
1208         unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME);
1209
1210         if (pdata->exit)
1211                 pdata->exit(pdev);
1212
1213         return 0;
1214 }
1215
1216 struct platform_driver fsl_otg_driver = {
1217         .probe = fsl_otg_probe,
1218         .remove = fsl_otg_remove,
1219         .driver = {
1220                 .name = driver_name,
1221                 .owner = THIS_MODULE,
1222         },
1223 };
1224
1225 module_platform_driver(fsl_otg_driver);
1226
1227 MODULE_DESCRIPTION(DRIVER_INFO);
1228 MODULE_AUTHOR(DRIVER_AUTHOR);
1229 MODULE_LICENSE("GPL");